![Vincent Bernat](/assets/img/avatar_default.png)
Currently, gratuitous ARP/ND packets are sent every `miimon' milliseconds. This commit allows a user to specify a custom delay through a new option, `peer_notif_delay'. Like for `updelay' and `downdelay', this delay should be a multiple of `miimon' to avoid managing an additional work queue. The configuration logic is copied from `updelay' and `downdelay'. However, the default value cannot be set using a module parameter: Netlink or sysfs should be used to configure this feature. When setting `miimon' to 100 and `peer_notif_delay' to 500, we can observe the 500 ms delay is respected: 20:30:19.354693 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 20:30:19.874892 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 20:30:20.394919 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 20:30:20.914963 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28 In bond_mii_monitor(), I have tried to keep the lock logic readable. The change is due to the fact we cannot rely on a notification to lower the value of `bond->send_peer_notif' as `NETDEV_NOTIFY_PEERS' is only triggered once every N times, while we need to decrement the counter each time. iproute2 also needs to be updated to be able to specify this new attribute through `ip link'. Signed-off-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
134 lines
3.7 KiB
C
134 lines
3.7 KiB
C
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
/*
|
|
* drivers/net/bond/bond_options.h - bonding options
|
|
* Copyright (c) 2013 Nikolay Aleksandrov <nikolay@redhat.com>
|
|
*/
|
|
|
|
#ifndef _NET_BOND_OPTIONS_H
|
|
#define _NET_BOND_OPTIONS_H
|
|
|
|
#define BOND_OPT_MAX_NAMELEN 32
|
|
#define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST)
|
|
#define BOND_MODE_ALL_EX(x) (~(x))
|
|
|
|
/* Option flags:
|
|
* BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting
|
|
* BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting
|
|
* BOND_OPTFLAG_RAWVAL - the option parses the value itself
|
|
*/
|
|
enum {
|
|
BOND_OPTFLAG_NOSLAVES = BIT(0),
|
|
BOND_OPTFLAG_IFDOWN = BIT(1),
|
|
BOND_OPTFLAG_RAWVAL = BIT(2)
|
|
};
|
|
|
|
/* Value type flags:
|
|
* BOND_VALFLAG_DEFAULT - mark the value as default
|
|
* BOND_VALFLAG_(MIN|MAX) - mark the value as min/max
|
|
*/
|
|
enum {
|
|
BOND_VALFLAG_DEFAULT = BIT(0),
|
|
BOND_VALFLAG_MIN = BIT(1),
|
|
BOND_VALFLAG_MAX = BIT(2)
|
|
};
|
|
|
|
/* Option IDs, their bit positions correspond to their IDs */
|
|
enum {
|
|
BOND_OPT_MODE,
|
|
BOND_OPT_PACKETS_PER_SLAVE,
|
|
BOND_OPT_XMIT_HASH,
|
|
BOND_OPT_ARP_VALIDATE,
|
|
BOND_OPT_ARP_ALL_TARGETS,
|
|
BOND_OPT_FAIL_OVER_MAC,
|
|
BOND_OPT_ARP_INTERVAL,
|
|
BOND_OPT_ARP_TARGETS,
|
|
BOND_OPT_DOWNDELAY,
|
|
BOND_OPT_UPDELAY,
|
|
BOND_OPT_LACP_RATE,
|
|
BOND_OPT_MINLINKS,
|
|
BOND_OPT_AD_SELECT,
|
|
BOND_OPT_NUM_PEER_NOTIF,
|
|
BOND_OPT_MIIMON,
|
|
BOND_OPT_PRIMARY,
|
|
BOND_OPT_PRIMARY_RESELECT,
|
|
BOND_OPT_USE_CARRIER,
|
|
BOND_OPT_ACTIVE_SLAVE,
|
|
BOND_OPT_QUEUE_ID,
|
|
BOND_OPT_ALL_SLAVES_ACTIVE,
|
|
BOND_OPT_RESEND_IGMP,
|
|
BOND_OPT_LP_INTERVAL,
|
|
BOND_OPT_SLAVES,
|
|
BOND_OPT_TLB_DYNAMIC_LB,
|
|
BOND_OPT_AD_ACTOR_SYS_PRIO,
|
|
BOND_OPT_AD_ACTOR_SYSTEM,
|
|
BOND_OPT_AD_USER_PORT_KEY,
|
|
BOND_OPT_NUM_PEER_NOTIF_ALIAS,
|
|
BOND_OPT_PEER_NOTIF_DELAY,
|
|
BOND_OPT_LAST
|
|
};
|
|
|
|
/* This structure is used for storing option values and for passing option
|
|
* values when changing an option. The logic when used as an arg is as follows:
|
|
* - if string != NULL -> parse it, if the opt is RAW type then return it, else
|
|
* return the parse result
|
|
* - if string == NULL -> parse value
|
|
*/
|
|
struct bond_opt_value {
|
|
char *string;
|
|
u64 value;
|
|
u32 flags;
|
|
};
|
|
|
|
struct bonding;
|
|
|
|
struct bond_option {
|
|
int id;
|
|
const char *name;
|
|
const char *desc;
|
|
u32 flags;
|
|
|
|
/* unsuppmodes is used to denote modes in which the option isn't
|
|
* supported.
|
|
*/
|
|
unsigned long unsuppmodes;
|
|
/* supported values which this option can have, can be a subset of
|
|
* BOND_OPTVAL_RANGE's value range
|
|
*/
|
|
const struct bond_opt_value *values;
|
|
|
|
int (*set)(struct bonding *bond, const struct bond_opt_value *val);
|
|
};
|
|
|
|
int __bond_opt_set(struct bonding *bond, unsigned int option,
|
|
struct bond_opt_value *val);
|
|
int __bond_opt_set_notify(struct bonding *bond, unsigned int option,
|
|
struct bond_opt_value *val);
|
|
int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf);
|
|
|
|
const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
|
|
struct bond_opt_value *val);
|
|
const struct bond_option *bond_opt_get(unsigned int option);
|
|
const struct bond_option *bond_opt_get_by_name(const char *name);
|
|
const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val);
|
|
|
|
/* This helper is used to initialize a bond_opt_value structure for parameter
|
|
* passing. There should be either a valid string or value, but not both.
|
|
* When value is ULLONG_MAX then string will be used.
|
|
*/
|
|
static inline void __bond_opt_init(struct bond_opt_value *optval,
|
|
char *string, u64 value)
|
|
{
|
|
memset(optval, 0, sizeof(*optval));
|
|
optval->value = ULLONG_MAX;
|
|
if (value == ULLONG_MAX)
|
|
optval->string = string;
|
|
else
|
|
optval->value = value;
|
|
}
|
|
#define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value)
|
|
#define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX)
|
|
|
|
void bond_option_arp_ip_targets_clear(struct bonding *bond);
|
|
|
|
#endif /* _NET_BOND_OPTIONS_H */
|