alistair23-linux/drivers/usb
Sarah Sharp f444ff27e9 xhci: STFU: Be quieter during URB submission and completion.
Unsurprisingly, URBs get submitted and completed a lot in the xHCI
driver.  If we have to print 10 lines of debug for every URB submitted
or completed, then that can cause the whole system to stay in the
interrupt handler too long, and can cause Missed Service completion
codes for isochronous transfers.

Cut down the debugging in the URB submission and completion paths:
 - Don't squawk about successful transfers, only unsuccessful ones.
 - Only print the number of bytes transferred if this was a short
   transfer.
 - Don't print the endpoint index for successful transfers (will add
   more debug to failed transfers to show endpoint index there later).
 - Stop printing MMIO writes.  This debugging shows up when the endpoint
   doorbell is rung a to start a transfer (basically for every URB).
 - Don't print out the ring enqueue and dequeue pointers
 - Stop printing when we're pointing to a link TRB.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2011-05-25 16:03:14 -07:00
..
atm Fix common misspellings 2011-03-31 11:26:23 -03:00
c67x00 Fix common misspellings 2011-03-31 11:26:23 -03:00
class USB: cdc_acm: Fix oops when Droids MuIn LCD is connected 2011-05-11 15:14:28 -07:00
core USB: remove remaining usages of hcd->state from usbcore and fix regression 2011-05-19 16:34:04 -07:00
early USB: EHCI: Support controllers with big endian capability regs 2011-05-03 11:43:21 -07:00
gadget Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2011-05-23 12:33:02 -07:00
host xhci: STFU: Be quieter during URB submission and completion. 2011-05-25 16:03:14 -07:00
image Fix common misspellings 2011-03-31 11:26:23 -03:00
misc Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2011-05-23 12:33:02 -07:00
mon USB: usbmon: fix-up docs and text API for sparse ISO 2011-02-04 11:46:57 -08:00
musb usb: musb: ux500: add configuration and build options for ux500 dma 2011-05-18 14:43:16 +03:00
otg USB: OTG: msm: Free VCCCX regulator even if we can't set the voltage 2011-05-17 11:20:23 -07:00
renesas_usbhs usb: renesas_usbhs: fixup error processing on probe/remove 2011-05-11 15:17:02 -07:00
serial USB: option: add support for Huawei E353 device 2011-05-17 11:20:22 -07:00
storage Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2011-05-23 12:33:02 -07:00
wusbcore Fix common misspellings 2011-03-31 11:26:23 -03:00
Kconfig USB: EHCI: Add bus glue for GRLIB GRUSBHC controller 2011-05-03 11:43:48 -07:00
Makefile USB: fix build of FSL MPH DR OF platform driver 2011-05-02 16:59:37 -07:00
README
usb-skeleton.c llseek: automatically add .llseek fop 2010-10-15 15:53:27 +02:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.