![Daniel Mack](/assets/img/avatar_default.png)
This patch adds a driver for Microchips CAP1106, an I2C driven, 6-channel capacitive touch sensor. For now, only the capacitive buttons are supported, and no specific settings that can be tweaked for individual channels, except for the device-wide sensitivity gain. The defaults seem to work just fine out of the box, so I'll leave configurable parameters for someone who's in need of them and who can actually measure the impact. All registers are prepared, however. Many of them are just not used for now. The implementation does not make any attempt to be compatible to platform data driven boards, but fully depends on CONFIG_OF. Power management functions are also left for volounteers with the ability to actually test them. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
62 lines
2.7 KiB
Makefile
62 lines
2.7 KiB
Makefile
#
|
|
# Makefile for the input core drivers.
|
|
#
|
|
|
|
# Each configuration option enables a list of files.
|
|
|
|
obj-$(CONFIG_KEYBOARD_ADP5520) += adp5520-keys.o
|
|
obj-$(CONFIG_KEYBOARD_ADP5588) += adp5588-keys.o
|
|
obj-$(CONFIG_KEYBOARD_ADP5589) += adp5589-keys.o
|
|
obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o
|
|
obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o
|
|
obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
|
|
obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
|
|
obj-$(CONFIG_KEYBOARD_CAP1106) += cap1106.o
|
|
obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o
|
|
obj-$(CONFIG_KEYBOARD_CROS_EC) += cros_ec_keyb.o
|
|
obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o
|
|
obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
|
|
obj-$(CONFIG_KEYBOARD_GOLDFISH_EVENTS) += goldfish_events.o
|
|
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
|
|
obj-$(CONFIG_KEYBOARD_GPIO_POLLED) += gpio_keys_polled.o
|
|
obj-$(CONFIG_KEYBOARD_TCA6416) += tca6416-keypad.o
|
|
obj-$(CONFIG_KEYBOARD_TCA8418) += tca8418_keypad.o
|
|
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
|
|
obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o
|
|
obj-$(CONFIG_KEYBOARD_IMX) += imx_keypad.o
|
|
obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o
|
|
obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o
|
|
obj-$(CONFIG_KEYBOARD_LKKBD) += lkkbd.o
|
|
obj-$(CONFIG_KEYBOARD_LM8323) += lm8323.o
|
|
obj-$(CONFIG_KEYBOARD_LM8333) += lm8333.o
|
|
obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o
|
|
obj-$(CONFIG_KEYBOARD_LPC32XX) += lpc32xx-keys.o
|
|
obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
|
|
obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
|
|
obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o
|
|
obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o
|
|
obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o
|
|
obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
|
|
obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o
|
|
obj-$(CONFIG_KEYBOARD_NSPIRE) += nspire-keypad.o
|
|
obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o
|
|
obj-$(CONFIG_KEYBOARD_OMAP4) += omap4-keypad.o
|
|
obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o
|
|
obj-$(CONFIG_KEYBOARD_PMIC8XXX) += pmic8xxx-keypad.o
|
|
obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o
|
|
obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o
|
|
obj-$(CONFIG_KEYBOARD_QT1070) += qt1070.o
|
|
obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o
|
|
obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o
|
|
obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
|
|
obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o
|
|
obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o
|
|
obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
|
|
obj-$(CONFIG_KEYBOARD_ST_KEYSCAN) += st-keyscan.o
|
|
obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
|
|
obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o
|
|
obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o
|
|
obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o
|
|
obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o
|
|
obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o
|