![Benjamin Herrenschmidt](/assets/img/avatar_default.png)
The new Cell EDAC driver needs that file, oprofile also does ugly path tricks to get to it, it's time to move it to asm-powerpc. While at it, rename it to be consistent with cell-pmu.h (and dashes look nicer than underscores anyway). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
385 lines
10 KiB
C
385 lines
10 KiB
C
/*
|
|
* thermal support for the cell processor
|
|
*
|
|
* This module adds some sysfs attributes to cpu and spu nodes.
|
|
* Base for measurements are the digital thermal sensors (DTS)
|
|
* located on the chip.
|
|
* The accuracy is 2 degrees, starting from 65 up to 125 degrees celsius
|
|
* The attributes can be found under
|
|
* /sys/devices/system/cpu/cpuX/thermal
|
|
* /sys/devices/system/spu/spuX/thermal
|
|
*
|
|
* The following attributes are added for each node:
|
|
* temperature:
|
|
* contains the current temperature measured by the DTS
|
|
* throttle_begin:
|
|
* throttling begins when temperature is greater or equal to
|
|
* throttle_begin. Setting this value to 125 prevents throttling.
|
|
* throttle_end:
|
|
* throttling is being ceased, if the temperature is lower than
|
|
* throttle_end. Due to a delay between applying throttling and
|
|
* a reduced temperature this value should be less than throttle_begin.
|
|
* A value equal to throttle_begin provides only a very little hysteresis.
|
|
* throttle_full_stop:
|
|
* If the temperatrue is greater or equal to throttle_full_stop,
|
|
* full throttling is applied to the cpu or spu. This value should be
|
|
* greater than throttle_begin and throttle_end. Setting this value to
|
|
* 65 prevents the unit from running code at all.
|
|
*
|
|
* (C) Copyright IBM Deutschland Entwicklung GmbH 2005
|
|
*
|
|
* Author: Christian Krafft <krafft@de.ibm.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/sysdev.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/cpu.h>
|
|
#include <asm/spu.h>
|
|
#include <asm/io.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/cell-regs.h>
|
|
|
|
#include "spu_priv1_mmio.h"
|
|
|
|
#define TEMP_MIN 65
|
|
#define TEMP_MAX 125
|
|
|
|
#define SYSDEV_PREFIX_ATTR(_prefix,_name,_mode) \
|
|
struct sysdev_attribute attr_ ## _prefix ## _ ## _name = { \
|
|
.attr = { .name = __stringify(_name), .mode = _mode }, \
|
|
.show = _prefix ## _show_ ## _name, \
|
|
.store = _prefix ## _store_ ## _name, \
|
|
};
|
|
|
|
static inline u8 reg_to_temp(u8 reg_value)
|
|
{
|
|
return ((reg_value & 0x3f) << 1) + TEMP_MIN;
|
|
}
|
|
|
|
static inline u8 temp_to_reg(u8 temp)
|
|
{
|
|
return ((temp - TEMP_MIN) >> 1) & 0x3f;
|
|
}
|
|
|
|
static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev)
|
|
{
|
|
struct spu *spu;
|
|
|
|
spu = container_of(sysdev, struct spu, sysdev);
|
|
|
|
return cbe_get_pmd_regs(spu_devnode(spu));
|
|
}
|
|
|
|
/* returns the value for a given spu in a given register */
|
|
static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iomem *reg)
|
|
{
|
|
union spe_reg value;
|
|
struct spu *spu;
|
|
|
|
spu = container_of(sysdev, struct spu, sysdev);
|
|
value.val = in_be64(®->val);
|
|
|
|
return value.spe[spu->spe_id];
|
|
}
|
|
|
|
static ssize_t spu_show_temp(struct sys_device *sysdev, char *buf)
|
|
{
|
|
u8 value;
|
|
struct cbe_pmd_regs __iomem *pmd_regs;
|
|
|
|
pmd_regs = get_pmd_regs(sysdev);
|
|
|
|
value = spu_read_register_value(sysdev, &pmd_regs->ts_ctsr1);
|
|
|
|
return sprintf(buf, "%d\n", reg_to_temp(value));
|
|
}
|
|
|
|
static ssize_t show_throttle(struct cbe_pmd_regs __iomem *pmd_regs, char *buf, int pos)
|
|
{
|
|
u64 value;
|
|
|
|
value = in_be64(&pmd_regs->tm_tpr.val);
|
|
/* access the corresponding byte */
|
|
value >>= pos;
|
|
value &= 0x3F;
|
|
|
|
return sprintf(buf, "%d\n", reg_to_temp(value));
|
|
}
|
|
|
|
static ssize_t store_throttle(struct cbe_pmd_regs __iomem *pmd_regs, const char *buf, size_t size, int pos)
|
|
{
|
|
u64 reg_value;
|
|
int temp;
|
|
u64 new_value;
|
|
int ret;
|
|
|
|
ret = sscanf(buf, "%u", &temp);
|
|
|
|
if (ret != 1 || temp < TEMP_MIN || temp > TEMP_MAX)
|
|
return -EINVAL;
|
|
|
|
new_value = temp_to_reg(temp);
|
|
|
|
reg_value = in_be64(&pmd_regs->tm_tpr.val);
|
|
|
|
/* zero out bits for new value */
|
|
reg_value &= ~(0xffull << pos);
|
|
/* set bits to new value */
|
|
reg_value |= new_value << pos;
|
|
|
|
out_be64(&pmd_regs->tm_tpr.val, reg_value);
|
|
return size;
|
|
}
|
|
|
|
static ssize_t spu_show_throttle_end(struct sys_device *sysdev, char *buf)
|
|
{
|
|
return show_throttle(get_pmd_regs(sysdev), buf, 0);
|
|
}
|
|
|
|
static ssize_t spu_show_throttle_begin(struct sys_device *sysdev, char *buf)
|
|
{
|
|
return show_throttle(get_pmd_regs(sysdev), buf, 8);
|
|
}
|
|
|
|
static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev, char *buf)
|
|
{
|
|
return show_throttle(get_pmd_regs(sysdev), buf, 16);
|
|
}
|
|
|
|
static ssize_t spu_store_throttle_end(struct sys_device *sysdev, const char *buf, size_t size)
|
|
{
|
|
return store_throttle(get_pmd_regs(sysdev), buf, size, 0);
|
|
}
|
|
|
|
static ssize_t spu_store_throttle_begin(struct sys_device *sysdev, const char *buf, size_t size)
|
|
{
|
|
return store_throttle(get_pmd_regs(sysdev), buf, size, 8);
|
|
}
|
|
|
|
static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev, const char *buf, size_t size)
|
|
{
|
|
return store_throttle(get_pmd_regs(sysdev), buf, size, 16);
|
|
}
|
|
|
|
static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos)
|
|
{
|
|
struct cbe_pmd_regs __iomem *pmd_regs;
|
|
u64 value;
|
|
|
|
pmd_regs = cbe_get_cpu_pmd_regs(sysdev->id);
|
|
value = in_be64(&pmd_regs->ts_ctsr2);
|
|
|
|
value = (value >> pos) & 0x3f;
|
|
|
|
return sprintf(buf, "%d\n", reg_to_temp(value));
|
|
}
|
|
|
|
|
|
/* shows the temperature of the DTS on the PPE,
|
|
* located near the linear thermal sensor */
|
|
static ssize_t ppe_show_temp0(struct sys_device *sysdev, char *buf)
|
|
{
|
|
return ppe_show_temp(sysdev, buf, 32);
|
|
}
|
|
|
|
/* shows the temperature of the second DTS on the PPE */
|
|
static ssize_t ppe_show_temp1(struct sys_device *sysdev, char *buf)
|
|
{
|
|
return ppe_show_temp(sysdev, buf, 0);
|
|
}
|
|
|
|
static ssize_t ppe_show_throttle_end(struct sys_device *sysdev, char *buf)
|
|
{
|
|
return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 32);
|
|
}
|
|
|
|
static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev, char *buf)
|
|
{
|
|
return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 40);
|
|
}
|
|
|
|
static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev, char *buf)
|
|
{
|
|
return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 48);
|
|
}
|
|
|
|
static ssize_t ppe_store_throttle_end(struct sys_device *sysdev, const char *buf, size_t size)
|
|
{
|
|
return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 32);
|
|
}
|
|
|
|
static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev, const char *buf, size_t size)
|
|
{
|
|
return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 40);
|
|
}
|
|
|
|
static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev, const char *buf, size_t size)
|
|
{
|
|
return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 48);
|
|
}
|
|
|
|
|
|
static struct sysdev_attribute attr_spu_temperature = {
|
|
.attr = {.name = "temperature", .mode = 0400 },
|
|
.show = spu_show_temp,
|
|
};
|
|
|
|
static SYSDEV_PREFIX_ATTR(spu, throttle_end, 0600);
|
|
static SYSDEV_PREFIX_ATTR(spu, throttle_begin, 0600);
|
|
static SYSDEV_PREFIX_ATTR(spu, throttle_full_stop, 0600);
|
|
|
|
|
|
static struct attribute *spu_attributes[] = {
|
|
&attr_spu_temperature.attr,
|
|
&attr_spu_throttle_end.attr,
|
|
&attr_spu_throttle_begin.attr,
|
|
&attr_spu_throttle_full_stop.attr,
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute_group spu_attribute_group = {
|
|
.name = "thermal",
|
|
.attrs = spu_attributes,
|
|
};
|
|
|
|
static struct sysdev_attribute attr_ppe_temperature0 = {
|
|
.attr = {.name = "temperature0", .mode = 0400 },
|
|
.show = ppe_show_temp0,
|
|
};
|
|
|
|
static struct sysdev_attribute attr_ppe_temperature1 = {
|
|
.attr = {.name = "temperature1", .mode = 0400 },
|
|
.show = ppe_show_temp1,
|
|
};
|
|
|
|
static SYSDEV_PREFIX_ATTR(ppe, throttle_end, 0600);
|
|
static SYSDEV_PREFIX_ATTR(ppe, throttle_begin, 0600);
|
|
static SYSDEV_PREFIX_ATTR(ppe, throttle_full_stop, 0600);
|
|
|
|
static struct attribute *ppe_attributes[] = {
|
|
&attr_ppe_temperature0.attr,
|
|
&attr_ppe_temperature1.attr,
|
|
&attr_ppe_throttle_end.attr,
|
|
&attr_ppe_throttle_begin.attr,
|
|
&attr_ppe_throttle_full_stop.attr,
|
|
NULL,
|
|
};
|
|
|
|
static struct attribute_group ppe_attribute_group = {
|
|
.name = "thermal",
|
|
.attrs = ppe_attributes,
|
|
};
|
|
|
|
/*
|
|
* initialize throttling with default values
|
|
*/
|
|
static int __init init_default_values(void)
|
|
{
|
|
int cpu;
|
|
struct cbe_pmd_regs __iomem *pmd_regs;
|
|
struct sys_device *sysdev;
|
|
union ppe_spe_reg tpr;
|
|
union spe_reg str1;
|
|
u64 str2;
|
|
union spe_reg cr1;
|
|
u64 cr2;
|
|
|
|
/* TPR defaults */
|
|
/* ppe
|
|
* 1F - no full stop
|
|
* 08 - dynamic throttling starts if over 80 degrees
|
|
* 03 - dynamic throttling ceases if below 70 degrees */
|
|
tpr.ppe = 0x1F0803;
|
|
/* spe
|
|
* 10 - full stopped when over 96 degrees
|
|
* 08 - dynamic throttling starts if over 80 degrees
|
|
* 03 - dynamic throttling ceases if below 70 degrees
|
|
*/
|
|
tpr.spe = 0x100803;
|
|
|
|
/* STR defaults */
|
|
/* str1
|
|
* 10 - stop 16 of 32 cycles
|
|
*/
|
|
str1.val = 0x1010101010101010ull;
|
|
/* str2
|
|
* 10 - stop 16 of 32 cycles
|
|
*/
|
|
str2 = 0x10;
|
|
|
|
/* CR defaults */
|
|
/* cr1
|
|
* 4 - normal operation
|
|
*/
|
|
cr1.val = 0x0404040404040404ull;
|
|
/* cr2
|
|
* 4 - normal operation
|
|
*/
|
|
cr2 = 0x04;
|
|
|
|
for_each_possible_cpu (cpu) {
|
|
pr_debug("processing cpu %d\n", cpu);
|
|
sysdev = get_cpu_sysdev(cpu);
|
|
|
|
if (!sysdev) {
|
|
pr_info("invalid sysdev pointer for cbe_thermal\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
pmd_regs = cbe_get_cpu_pmd_regs(sysdev->id);
|
|
|
|
if (!pmd_regs) {
|
|
pr_info("invalid CBE regs pointer for cbe_thermal\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
out_be64(&pmd_regs->tm_str2, str2);
|
|
out_be64(&pmd_regs->tm_str1.val, str1.val);
|
|
out_be64(&pmd_regs->tm_tpr.val, tpr.val);
|
|
out_be64(&pmd_regs->tm_cr1.val, cr1.val);
|
|
out_be64(&pmd_regs->tm_cr2, cr2);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int __init thermal_init(void)
|
|
{
|
|
int rc = init_default_values();
|
|
|
|
if (rc == 0) {
|
|
spu_add_sysdev_attr_group(&spu_attribute_group);
|
|
cpu_add_sysdev_attr_group(&ppe_attribute_group);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
module_init(thermal_init);
|
|
|
|
static void __exit thermal_exit(void)
|
|
{
|
|
spu_remove_sysdev_attr_group(&spu_attribute_group);
|
|
cpu_remove_sysdev_attr_group(&ppe_attribute_group);
|
|
}
|
|
module_exit(thermal_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
|
|
|