![Jon Loeliger](/assets/img/avatar_default.png)
Convert #include of asm/of_{platform, device}.h into linux/of_{platform,device}.h for a few scattered platforms. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
364 lines
7.3 KiB
C
364 lines
7.3 KiB
C
/*
|
|
* Copyright (C) 2006-2007 PA Semi, Inc
|
|
*
|
|
* Author: Olof Johansson, PA Semi
|
|
*
|
|
* Maintained by: Olof Johansson <olof@lixom.net>
|
|
*
|
|
* Based on drivers/net/fs_enet/mii-bitbang.c.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of_platform.h>
|
|
|
|
#define DELAY 1
|
|
|
|
static void __iomem *gpio_regs;
|
|
|
|
struct gpio_priv {
|
|
int mdc_pin;
|
|
int mdio_pin;
|
|
};
|
|
|
|
#define MDC_PIN(bus) (((struct gpio_priv *)bus->priv)->mdc_pin)
|
|
#define MDIO_PIN(bus) (((struct gpio_priv *)bus->priv)->mdio_pin)
|
|
|
|
static inline void mdio_lo(struct mii_bus *bus)
|
|
{
|
|
out_le32(gpio_regs+0x10, 1 << MDIO_PIN(bus));
|
|
}
|
|
|
|
static inline void mdio_hi(struct mii_bus *bus)
|
|
{
|
|
out_le32(gpio_regs, 1 << MDIO_PIN(bus));
|
|
}
|
|
|
|
static inline void mdc_lo(struct mii_bus *bus)
|
|
{
|
|
out_le32(gpio_regs+0x10, 1 << MDC_PIN(bus));
|
|
}
|
|
|
|
static inline void mdc_hi(struct mii_bus *bus)
|
|
{
|
|
out_le32(gpio_regs, 1 << MDC_PIN(bus));
|
|
}
|
|
|
|
static inline void mdio_active(struct mii_bus *bus)
|
|
{
|
|
out_le32(gpio_regs+0x20, (1 << MDC_PIN(bus)) | (1 << MDIO_PIN(bus)));
|
|
}
|
|
|
|
static inline void mdio_tristate(struct mii_bus *bus)
|
|
{
|
|
out_le32(gpio_regs+0x30, (1 << MDIO_PIN(bus)));
|
|
}
|
|
|
|
static inline int mdio_read(struct mii_bus *bus)
|
|
{
|
|
return !!(in_le32(gpio_regs+0x40) & (1 << MDIO_PIN(bus)));
|
|
}
|
|
|
|
static void clock_out(struct mii_bus *bus, int bit)
|
|
{
|
|
if (bit)
|
|
mdio_hi(bus);
|
|
else
|
|
mdio_lo(bus);
|
|
udelay(DELAY);
|
|
mdc_hi(bus);
|
|
udelay(DELAY);
|
|
mdc_lo(bus);
|
|
}
|
|
|
|
/* Utility to send the preamble, address, and register (common to read and write). */
|
|
static void bitbang_pre(struct mii_bus *bus, int read, u8 addr, u8 reg)
|
|
{
|
|
int i;
|
|
|
|
/* CFE uses a really long preamble (40 bits). We'll do the same. */
|
|
mdio_active(bus);
|
|
for (i = 0; i < 40; i++) {
|
|
clock_out(bus, 1);
|
|
}
|
|
|
|
/* send the start bit (01) and the read opcode (10) or write (10) */
|
|
clock_out(bus, 0);
|
|
clock_out(bus, 1);
|
|
|
|
clock_out(bus, read);
|
|
clock_out(bus, !read);
|
|
|
|
/* send the PHY address */
|
|
for (i = 0; i < 5; i++) {
|
|
clock_out(bus, (addr & 0x10) != 0);
|
|
addr <<= 1;
|
|
}
|
|
|
|
/* send the register address */
|
|
for (i = 0; i < 5; i++) {
|
|
clock_out(bus, (reg & 0x10) != 0);
|
|
reg <<= 1;
|
|
}
|
|
}
|
|
|
|
static int gpio_mdio_read(struct mii_bus *bus, int phy_id, int location)
|
|
{
|
|
u16 rdreg;
|
|
int ret, i;
|
|
u8 addr = phy_id & 0xff;
|
|
u8 reg = location & 0xff;
|
|
|
|
bitbang_pre(bus, 1, addr, reg);
|
|
|
|
/* tri-state our MDIO I/O pin so we can read */
|
|
mdio_tristate(bus);
|
|
udelay(DELAY);
|
|
mdc_hi(bus);
|
|
udelay(DELAY);
|
|
mdc_lo(bus);
|
|
|
|
/* read 16 bits of register data, MSB first */
|
|
rdreg = 0;
|
|
for (i = 0; i < 16; i++) {
|
|
mdc_lo(bus);
|
|
udelay(DELAY);
|
|
mdc_hi(bus);
|
|
udelay(DELAY);
|
|
mdc_lo(bus);
|
|
udelay(DELAY);
|
|
rdreg <<= 1;
|
|
rdreg |= mdio_read(bus);
|
|
}
|
|
|
|
mdc_hi(bus);
|
|
udelay(DELAY);
|
|
mdc_lo(bus);
|
|
udelay(DELAY);
|
|
|
|
ret = rdreg;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int gpio_mdio_write(struct mii_bus *bus, int phy_id, int location, u16 val)
|
|
{
|
|
int i;
|
|
|
|
u8 addr = phy_id & 0xff;
|
|
u8 reg = location & 0xff;
|
|
u16 value = val & 0xffff;
|
|
|
|
bitbang_pre(bus, 0, addr, reg);
|
|
|
|
/* send the turnaround (10) */
|
|
mdc_lo(bus);
|
|
mdio_hi(bus);
|
|
udelay(DELAY);
|
|
mdc_hi(bus);
|
|
udelay(DELAY);
|
|
mdc_lo(bus);
|
|
mdio_lo(bus);
|
|
udelay(DELAY);
|
|
mdc_hi(bus);
|
|
udelay(DELAY);
|
|
|
|
/* write 16 bits of register data, MSB first */
|
|
for (i = 0; i < 16; i++) {
|
|
mdc_lo(bus);
|
|
if (value & 0x8000)
|
|
mdio_hi(bus);
|
|
else
|
|
mdio_lo(bus);
|
|
udelay(DELAY);
|
|
mdc_hi(bus);
|
|
udelay(DELAY);
|
|
value <<= 1;
|
|
}
|
|
|
|
/*
|
|
* Tri-state the MDIO line.
|
|
*/
|
|
mdio_tristate(bus);
|
|
mdc_lo(bus);
|
|
udelay(DELAY);
|
|
mdc_hi(bus);
|
|
udelay(DELAY);
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_mdio_reset(struct mii_bus *bus)
|
|
{
|
|
/*nothing here - dunno how to reset it*/
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int __devinit gpio_mdio_probe(struct of_device *ofdev,
|
|
const struct of_device_id *match)
|
|
{
|
|
struct device *dev = &ofdev->dev;
|
|
struct device_node *phy_dn, *np = ofdev->node;
|
|
struct mii_bus *new_bus;
|
|
struct gpio_priv *priv;
|
|
const unsigned int *prop;
|
|
int err;
|
|
int i;
|
|
|
|
err = -ENOMEM;
|
|
priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL);
|
|
if (!priv)
|
|
goto out;
|
|
|
|
new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
|
|
|
|
if (!new_bus)
|
|
goto out_free_priv;
|
|
|
|
new_bus->name = "pasemi gpio mdio bus";
|
|
new_bus->read = &gpio_mdio_read;
|
|
new_bus->write = &gpio_mdio_write;
|
|
new_bus->reset = &gpio_mdio_reset;
|
|
|
|
prop = of_get_property(np, "reg", NULL);
|
|
new_bus->id = *prop;
|
|
new_bus->priv = priv;
|
|
|
|
new_bus->phy_mask = 0;
|
|
|
|
new_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
|
|
|
|
if (!new_bus->irq)
|
|
goto out_free_bus;
|
|
|
|
for (i = 0; i < PHY_MAX_ADDR; i++)
|
|
new_bus->irq[i] = NO_IRQ;
|
|
|
|
for (phy_dn = of_get_next_child(np, NULL);
|
|
phy_dn != NULL;
|
|
phy_dn = of_get_next_child(np, phy_dn)) {
|
|
const unsigned int *ip, *regp;
|
|
|
|
ip = of_get_property(phy_dn, "interrupts", NULL);
|
|
regp = of_get_property(phy_dn, "reg", NULL);
|
|
if (!ip || !regp || *regp >= PHY_MAX_ADDR)
|
|
continue;
|
|
new_bus->irq[*regp] = irq_create_mapping(NULL, *ip);
|
|
}
|
|
|
|
prop = of_get_property(np, "mdc-pin", NULL);
|
|
priv->mdc_pin = *prop;
|
|
|
|
prop = of_get_property(np, "mdio-pin", NULL);
|
|
priv->mdio_pin = *prop;
|
|
|
|
new_bus->dev = dev;
|
|
dev_set_drvdata(dev, new_bus);
|
|
|
|
err = mdiobus_register(new_bus);
|
|
|
|
if (err != 0) {
|
|
printk(KERN_ERR "%s: Cannot register as MDIO bus, err %d\n",
|
|
new_bus->name, err);
|
|
goto out_free_irq;
|
|
}
|
|
|
|
return 0;
|
|
|
|
out_free_irq:
|
|
kfree(new_bus->irq);
|
|
out_free_bus:
|
|
kfree(new_bus);
|
|
out_free_priv:
|
|
kfree(priv);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
|
|
static int gpio_mdio_remove(struct of_device *dev)
|
|
{
|
|
struct mii_bus *bus = dev_get_drvdata(&dev->dev);
|
|
|
|
mdiobus_unregister(bus);
|
|
|
|
dev_set_drvdata(&dev->dev, NULL);
|
|
|
|
kfree(bus->priv);
|
|
bus->priv = NULL;
|
|
kfree(bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct of_device_id gpio_mdio_match[] =
|
|
{
|
|
{
|
|
.compatible = "gpio-mdio",
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, gpio_mdio_match);
|
|
|
|
static struct of_platform_driver gpio_mdio_driver =
|
|
{
|
|
.match_table = gpio_mdio_match,
|
|
.probe = gpio_mdio_probe,
|
|
.remove = gpio_mdio_remove,
|
|
.driver = {
|
|
.name = "gpio-mdio-bitbang",
|
|
},
|
|
};
|
|
|
|
int gpio_mdio_init(void)
|
|
{
|
|
struct device_node *np;
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "1682m-gpio");
|
|
if (!np)
|
|
np = of_find_compatible_node(NULL, NULL,
|
|
"pasemi,pwrficient-gpio");
|
|
if (!np)
|
|
return -ENODEV;
|
|
gpio_regs = of_iomap(np, 0);
|
|
of_node_put(np);
|
|
|
|
if (!gpio_regs)
|
|
return -ENODEV;
|
|
|
|
return of_register_platform_driver(&gpio_mdio_driver);
|
|
}
|
|
module_init(gpio_mdio_init);
|
|
|
|
void gpio_mdio_exit(void)
|
|
{
|
|
of_unregister_platform_driver(&gpio_mdio_driver);
|
|
if (gpio_regs)
|
|
iounmap(gpio_regs);
|
|
}
|
|
module_exit(gpio_mdio_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Olof Johansson <olof@lixom.net>");
|
|
MODULE_DESCRIPTION("Driver for MDIO over GPIO on PA Semi PWRficient-based boards");
|