![Stephen Rothwell](/assets/img/avatar_default.png)
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
1275 lines
36 KiB
C
1275 lines
36 KiB
C
/*
|
|
* eeh.c
|
|
* Copyright IBM Corporation 2001, 2005, 2006
|
|
* Copyright Dave Engebretsen & Todd Inglett 2001
|
|
* Copyright Linas Vepstas 2005, 2006
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
* Please address comments and feedback to Linas Vepstas <linas@austin.ibm.com>
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/list.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/rbtree.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/of.h>
|
|
|
|
#include <asm/atomic.h>
|
|
#include <asm/eeh.h>
|
|
#include <asm/eeh_event.h>
|
|
#include <asm/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/ppc-pci.h>
|
|
#include <asm/rtas.h>
|
|
|
|
#undef DEBUG
|
|
|
|
/** Overview:
|
|
* EEH, or "Extended Error Handling" is a PCI bridge technology for
|
|
* dealing with PCI bus errors that can't be dealt with within the
|
|
* usual PCI framework, except by check-stopping the CPU. Systems
|
|
* that are designed for high-availability/reliability cannot afford
|
|
* to crash due to a "mere" PCI error, thus the need for EEH.
|
|
* An EEH-capable bridge operates by converting a detected error
|
|
* into a "slot freeze", taking the PCI adapter off-line, making
|
|
* the slot behave, from the OS'es point of view, as if the slot
|
|
* were "empty": all reads return 0xff's and all writes are silently
|
|
* ignored. EEH slot isolation events can be triggered by parity
|
|
* errors on the address or data busses (e.g. during posted writes),
|
|
* which in turn might be caused by low voltage on the bus, dust,
|
|
* vibration, humidity, radioactivity or plain-old failed hardware.
|
|
*
|
|
* Note, however, that one of the leading causes of EEH slot
|
|
* freeze events are buggy device drivers, buggy device microcode,
|
|
* or buggy device hardware. This is because any attempt by the
|
|
* device to bus-master data to a memory address that is not
|
|
* assigned to the device will trigger a slot freeze. (The idea
|
|
* is to prevent devices-gone-wild from corrupting system memory).
|
|
* Buggy hardware/drivers will have a miserable time co-existing
|
|
* with EEH.
|
|
*
|
|
* Ideally, a PCI device driver, when suspecting that an isolation
|
|
* event has occured (e.g. by reading 0xff's), will then ask EEH
|
|
* whether this is the case, and then take appropriate steps to
|
|
* reset the PCI slot, the PCI device, and then resume operations.
|
|
* However, until that day, the checking is done here, with the
|
|
* eeh_check_failure() routine embedded in the MMIO macros. If
|
|
* the slot is found to be isolated, an "EEH Event" is synthesized
|
|
* and sent out for processing.
|
|
*/
|
|
|
|
/* If a device driver keeps reading an MMIO register in an interrupt
|
|
* handler after a slot isolation event has occurred, we assume it
|
|
* is broken and panic. This sets the threshold for how many read
|
|
* attempts we allow before panicking.
|
|
*/
|
|
#define EEH_MAX_FAILS 2100000
|
|
|
|
/* Time to wait for a PCI slot to report status, in milliseconds */
|
|
#define PCI_BUS_RESET_WAIT_MSEC (60*1000)
|
|
|
|
/* RTAS tokens */
|
|
static int ibm_set_eeh_option;
|
|
static int ibm_set_slot_reset;
|
|
static int ibm_read_slot_reset_state;
|
|
static int ibm_read_slot_reset_state2;
|
|
static int ibm_slot_error_detail;
|
|
static int ibm_get_config_addr_info;
|
|
static int ibm_get_config_addr_info2;
|
|
static int ibm_configure_bridge;
|
|
|
|
int eeh_subsystem_enabled;
|
|
EXPORT_SYMBOL(eeh_subsystem_enabled);
|
|
|
|
/* Lock to avoid races due to multiple reports of an error */
|
|
static DEFINE_SPINLOCK(confirm_error_lock);
|
|
|
|
/* Buffer for reporting slot-error-detail rtas calls. Its here
|
|
* in BSS, and not dynamically alloced, so that it ends up in
|
|
* RMO where RTAS can access it.
|
|
*/
|
|
static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX];
|
|
static DEFINE_SPINLOCK(slot_errbuf_lock);
|
|
static int eeh_error_buf_size;
|
|
|
|
/* Buffer for reporting pci register dumps. Its here in BSS, and
|
|
* not dynamically alloced, so that it ends up in RMO where RTAS
|
|
* can access it.
|
|
*/
|
|
#define EEH_PCI_REGS_LOG_LEN 4096
|
|
static unsigned char pci_regs_buf[EEH_PCI_REGS_LOG_LEN];
|
|
|
|
/* System monitoring statistics */
|
|
static unsigned long no_device;
|
|
static unsigned long no_dn;
|
|
static unsigned long no_cfg_addr;
|
|
static unsigned long ignored_check;
|
|
static unsigned long total_mmio_ffs;
|
|
static unsigned long false_positives;
|
|
static unsigned long slot_resets;
|
|
|
|
#define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE)
|
|
|
|
/* --------------------------------------------------------------- */
|
|
/* Below lies the EEH event infrastructure */
|
|
|
|
static void rtas_slot_error_detail(struct pci_dn *pdn, int severity,
|
|
char *driver_log, size_t loglen)
|
|
{
|
|
int config_addr;
|
|
unsigned long flags;
|
|
int rc;
|
|
|
|
/* Log the error with the rtas logger */
|
|
spin_lock_irqsave(&slot_errbuf_lock, flags);
|
|
memset(slot_errbuf, 0, eeh_error_buf_size);
|
|
|
|
/* Use PE configuration address, if present */
|
|
config_addr = pdn->eeh_config_addr;
|
|
if (pdn->eeh_pe_config_addr)
|
|
config_addr = pdn->eeh_pe_config_addr;
|
|
|
|
rc = rtas_call(ibm_slot_error_detail,
|
|
8, 1, NULL, config_addr,
|
|
BUID_HI(pdn->phb->buid),
|
|
BUID_LO(pdn->phb->buid),
|
|
virt_to_phys(driver_log), loglen,
|
|
virt_to_phys(slot_errbuf),
|
|
eeh_error_buf_size,
|
|
severity);
|
|
|
|
if (rc == 0)
|
|
log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0);
|
|
spin_unlock_irqrestore(&slot_errbuf_lock, flags);
|
|
}
|
|
|
|
/**
|
|
* gather_pci_data - copy assorted PCI config space registers to buff
|
|
* @pdn: device to report data for
|
|
* @buf: point to buffer in which to log
|
|
* @len: amount of room in buffer
|
|
*
|
|
* This routine captures assorted PCI configuration space data,
|
|
* and puts them into a buffer for RTAS error logging.
|
|
*/
|
|
static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len)
|
|
{
|
|
struct pci_dev *dev = pdn->pcidev;
|
|
u32 cfg;
|
|
int cap, i;
|
|
int n = 0;
|
|
|
|
n += scnprintf(buf+n, len-n, "%s\n", pdn->node->full_name);
|
|
printk(KERN_WARNING "EEH: of node=%s\n", pdn->node->full_name);
|
|
|
|
rtas_read_config(pdn, PCI_VENDOR_ID, 4, &cfg);
|
|
n += scnprintf(buf+n, len-n, "dev/vend:%08x\n", cfg);
|
|
printk(KERN_WARNING "EEH: PCI device/vendor: %08x\n", cfg);
|
|
|
|
rtas_read_config(pdn, PCI_COMMAND, 4, &cfg);
|
|
n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg);
|
|
printk(KERN_WARNING "EEH: PCI cmd/status register: %08x\n", cfg);
|
|
|
|
if (!dev) {
|
|
printk(KERN_WARNING "EEH: no PCI device for this of node\n");
|
|
return n;
|
|
}
|
|
|
|
/* Gather bridge-specific registers */
|
|
if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) {
|
|
rtas_read_config(pdn, PCI_SEC_STATUS, 2, &cfg);
|
|
n += scnprintf(buf+n, len-n, "sec stat:%x\n", cfg);
|
|
printk(KERN_WARNING "EEH: Bridge secondary status: %04x\n", cfg);
|
|
|
|
rtas_read_config(pdn, PCI_BRIDGE_CONTROL, 2, &cfg);
|
|
n += scnprintf(buf+n, len-n, "brdg ctl:%x\n", cfg);
|
|
printk(KERN_WARNING "EEH: Bridge control: %04x\n", cfg);
|
|
}
|
|
|
|
/* Dump out the PCI-X command and status regs */
|
|
cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
|
|
if (cap) {
|
|
rtas_read_config(pdn, cap, 4, &cfg);
|
|
n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg);
|
|
printk(KERN_WARNING "EEH: PCI-X cmd: %08x\n", cfg);
|
|
|
|
rtas_read_config(pdn, cap+4, 4, &cfg);
|
|
n += scnprintf(buf+n, len-n, "pcix-stat:%x\n", cfg);
|
|
printk(KERN_WARNING "EEH: PCI-X status: %08x\n", cfg);
|
|
}
|
|
|
|
/* If PCI-E capable, dump PCI-E cap 10, and the AER */
|
|
cap = pci_find_capability(dev, PCI_CAP_ID_EXP);
|
|
if (cap) {
|
|
n += scnprintf(buf+n, len-n, "pci-e cap10:\n");
|
|
printk(KERN_WARNING
|
|
"EEH: PCI-E capabilities and status follow:\n");
|
|
|
|
for (i=0; i<=8; i++) {
|
|
rtas_read_config(pdn, cap+4*i, 4, &cfg);
|
|
n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
|
|
printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg);
|
|
}
|
|
|
|
cap = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
|
|
if (cap) {
|
|
n += scnprintf(buf+n, len-n, "pci-e AER:\n");
|
|
printk(KERN_WARNING
|
|
"EEH: PCI-E AER capability register set follows:\n");
|
|
|
|
for (i=0; i<14; i++) {
|
|
rtas_read_config(pdn, cap+4*i, 4, &cfg);
|
|
n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg);
|
|
printk(KERN_WARNING "EEH: PCI-E AER %02x: %08x\n", i, cfg);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Gather status on devices under the bridge */
|
|
if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) {
|
|
struct device_node *dn;
|
|
|
|
for_each_child_of_node(pdn->node, dn) {
|
|
pdn = PCI_DN(dn);
|
|
if (pdn)
|
|
n += gather_pci_data(pdn, buf+n, len-n);
|
|
}
|
|
}
|
|
|
|
return n;
|
|
}
|
|
|
|
void eeh_slot_error_detail(struct pci_dn *pdn, int severity)
|
|
{
|
|
size_t loglen = 0;
|
|
pci_regs_buf[0] = 0;
|
|
|
|
rtas_pci_enable(pdn, EEH_THAW_MMIO);
|
|
loglen = gather_pci_data(pdn, pci_regs_buf, EEH_PCI_REGS_LOG_LEN);
|
|
|
|
rtas_slot_error_detail(pdn, severity, pci_regs_buf, loglen);
|
|
}
|
|
|
|
/**
|
|
* read_slot_reset_state - Read the reset state of a device node's slot
|
|
* @dn: device node to read
|
|
* @rets: array to return results in
|
|
*/
|
|
static int read_slot_reset_state(struct pci_dn *pdn, int rets[])
|
|
{
|
|
int token, outputs;
|
|
int config_addr;
|
|
|
|
if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) {
|
|
token = ibm_read_slot_reset_state2;
|
|
outputs = 4;
|
|
} else {
|
|
token = ibm_read_slot_reset_state;
|
|
rets[2] = 0; /* fake PE Unavailable info */
|
|
outputs = 3;
|
|
}
|
|
|
|
/* Use PE configuration address, if present */
|
|
config_addr = pdn->eeh_config_addr;
|
|
if (pdn->eeh_pe_config_addr)
|
|
config_addr = pdn->eeh_pe_config_addr;
|
|
|
|
return rtas_call(token, 3, outputs, rets, config_addr,
|
|
BUID_HI(pdn->phb->buid), BUID_LO(pdn->phb->buid));
|
|
}
|
|
|
|
/**
|
|
* eeh_wait_for_slot_status - returns error status of slot
|
|
* @pdn pci device node
|
|
* @max_wait_msecs maximum number to millisecs to wait
|
|
*
|
|
* Return negative value if a permanent error, else return
|
|
* Partition Endpoint (PE) status value.
|
|
*
|
|
* If @max_wait_msecs is positive, then this routine will
|
|
* sleep until a valid status can be obtained, or until
|
|
* the max allowed wait time is exceeded, in which case
|
|
* a -2 is returned.
|
|
*/
|
|
int
|
|
eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs)
|
|
{
|
|
int rc;
|
|
int rets[3];
|
|
int mwait;
|
|
|
|
while (1) {
|
|
rc = read_slot_reset_state(pdn, rets);
|
|
if (rc) return rc;
|
|
if (rets[1] == 0) return -1; /* EEH is not supported */
|
|
|
|
if (rets[0] != 5) return rets[0]; /* return actual status */
|
|
|
|
if (rets[2] == 0) return -1; /* permanently unavailable */
|
|
|
|
if (max_wait_msecs <= 0) break;
|
|
|
|
mwait = rets[2];
|
|
if (mwait <= 0) {
|
|
printk (KERN_WARNING
|
|
"EEH: Firmware returned bad wait value=%d\n", mwait);
|
|
mwait = 1000;
|
|
} else if (mwait > 300*1000) {
|
|
printk (KERN_WARNING
|
|
"EEH: Firmware is taking too long, time=%d\n", mwait);
|
|
mwait = 300*1000;
|
|
}
|
|
max_wait_msecs -= mwait;
|
|
msleep (mwait);
|
|
}
|
|
|
|
printk(KERN_WARNING "EEH: Timed out waiting for slot status\n");
|
|
return -2;
|
|
}
|
|
|
|
/**
|
|
* eeh_token_to_phys - convert EEH address token to phys address
|
|
* @token i/o token, should be address in the form 0xA....
|
|
*/
|
|
static inline unsigned long eeh_token_to_phys(unsigned long token)
|
|
{
|
|
pte_t *ptep;
|
|
unsigned long pa;
|
|
|
|
ptep = find_linux_pte(init_mm.pgd, token);
|
|
if (!ptep)
|
|
return token;
|
|
pa = pte_pfn(*ptep) << PAGE_SHIFT;
|
|
|
|
return pa | (token & (PAGE_SIZE-1));
|
|
}
|
|
|
|
/**
|
|
* Return the "partitionable endpoint" (pe) under which this device lies
|
|
*/
|
|
struct device_node * find_device_pe(struct device_node *dn)
|
|
{
|
|
while ((dn->parent) && PCI_DN(dn->parent) &&
|
|
(PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) {
|
|
dn = dn->parent;
|
|
}
|
|
return dn;
|
|
}
|
|
|
|
/** Mark all devices that are children of this device as failed.
|
|
* Mark the device driver too, so that it can see the failure
|
|
* immediately; this is critical, since some drivers poll
|
|
* status registers in interrupts ... If a driver is polling,
|
|
* and the slot is frozen, then the driver can deadlock in
|
|
* an interrupt context, which is bad.
|
|
*/
|
|
|
|
static void __eeh_mark_slot(struct device_node *parent, int mode_flag)
|
|
{
|
|
struct device_node *dn;
|
|
|
|
for_each_child_of_node(parent, dn) {
|
|
if (PCI_DN(dn)) {
|
|
/* Mark the pci device driver too */
|
|
struct pci_dev *dev = PCI_DN(dn)->pcidev;
|
|
|
|
PCI_DN(dn)->eeh_mode |= mode_flag;
|
|
|
|
if (dev && dev->driver)
|
|
dev->error_state = pci_channel_io_frozen;
|
|
|
|
__eeh_mark_slot(dn, mode_flag);
|
|
}
|
|
}
|
|
}
|
|
|
|
void eeh_mark_slot (struct device_node *dn, int mode_flag)
|
|
{
|
|
struct pci_dev *dev;
|
|
dn = find_device_pe (dn);
|
|
|
|
/* Back up one, since config addrs might be shared */
|
|
if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
|
|
dn = dn->parent;
|
|
|
|
PCI_DN(dn)->eeh_mode |= mode_flag;
|
|
|
|
/* Mark the pci device too */
|
|
dev = PCI_DN(dn)->pcidev;
|
|
if (dev)
|
|
dev->error_state = pci_channel_io_frozen;
|
|
|
|
__eeh_mark_slot(dn, mode_flag);
|
|
}
|
|
|
|
static void __eeh_clear_slot(struct device_node *parent, int mode_flag)
|
|
{
|
|
struct device_node *dn;
|
|
|
|
for_each_child_of_node(parent, dn) {
|
|
if (PCI_DN(dn)) {
|
|
PCI_DN(dn)->eeh_mode &= ~mode_flag;
|
|
PCI_DN(dn)->eeh_check_count = 0;
|
|
__eeh_clear_slot(dn, mode_flag);
|
|
}
|
|
}
|
|
}
|
|
|
|
void eeh_clear_slot (struct device_node *dn, int mode_flag)
|
|
{
|
|
unsigned long flags;
|
|
spin_lock_irqsave(&confirm_error_lock, flags);
|
|
|
|
dn = find_device_pe (dn);
|
|
|
|
/* Back up one, since config addrs might be shared */
|
|
if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent))
|
|
dn = dn->parent;
|
|
|
|
PCI_DN(dn)->eeh_mode &= ~mode_flag;
|
|
PCI_DN(dn)->eeh_check_count = 0;
|
|
__eeh_clear_slot(dn, mode_flag);
|
|
spin_unlock_irqrestore(&confirm_error_lock, flags);
|
|
}
|
|
|
|
/**
|
|
* eeh_dn_check_failure - check if all 1's data is due to EEH slot freeze
|
|
* @dn device node
|
|
* @dev pci device, if known
|
|
*
|
|
* Check for an EEH failure for the given device node. Call this
|
|
* routine if the result of a read was all 0xff's and you want to
|
|
* find out if this is due to an EEH slot freeze. This routine
|
|
* will query firmware for the EEH status.
|
|
*
|
|
* Returns 0 if there has not been an EEH error; otherwise returns
|
|
* a non-zero value and queues up a slot isolation event notification.
|
|
*
|
|
* It is safe to call this routine in an interrupt context.
|
|
*/
|
|
int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
|
|
{
|
|
int ret;
|
|
int rets[3];
|
|
unsigned long flags;
|
|
struct pci_dn *pdn;
|
|
int rc = 0;
|
|
|
|
total_mmio_ffs++;
|
|
|
|
if (!eeh_subsystem_enabled)
|
|
return 0;
|
|
|
|
if (!dn) {
|
|
no_dn++;
|
|
return 0;
|
|
}
|
|
dn = find_device_pe(dn);
|
|
pdn = PCI_DN(dn);
|
|
|
|
/* Access to IO BARs might get this far and still not want checking. */
|
|
if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) ||
|
|
pdn->eeh_mode & EEH_MODE_NOCHECK) {
|
|
ignored_check++;
|
|
#ifdef DEBUG
|
|
printk ("EEH:ignored check (%x) for %s %s\n",
|
|
pdn->eeh_mode, pci_name (dev), dn->full_name);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
if (!pdn->eeh_config_addr && !pdn->eeh_pe_config_addr) {
|
|
no_cfg_addr++;
|
|
return 0;
|
|
}
|
|
|
|
/* If we already have a pending isolation event for this
|
|
* slot, we know it's bad already, we don't need to check.
|
|
* Do this checking under a lock; as multiple PCI devices
|
|
* in one slot might report errors simultaneously, and we
|
|
* only want one error recovery routine running.
|
|
*/
|
|
spin_lock_irqsave(&confirm_error_lock, flags);
|
|
rc = 1;
|
|
if (pdn->eeh_mode & EEH_MODE_ISOLATED) {
|
|
pdn->eeh_check_count ++;
|
|
if (pdn->eeh_check_count >= EEH_MAX_FAILS) {
|
|
printk (KERN_ERR "EEH: Device driver ignored %d bad reads, panicing\n",
|
|
pdn->eeh_check_count);
|
|
dump_stack();
|
|
msleep(5000);
|
|
|
|
/* re-read the slot reset state */
|
|
if (read_slot_reset_state(pdn, rets) != 0)
|
|
rets[0] = -1; /* reset state unknown */
|
|
|
|
/* If we are here, then we hit an infinite loop. Stop. */
|
|
panic("EEH: MMIO halt (%d) on device:%s\n", rets[0], pci_name(dev));
|
|
}
|
|
goto dn_unlock;
|
|
}
|
|
|
|
/*
|
|
* Now test for an EEH failure. This is VERY expensive.
|
|
* Note that the eeh_config_addr may be a parent device
|
|
* in the case of a device behind a bridge, or it may be
|
|
* function zero of a multi-function device.
|
|
* In any case they must share a common PHB.
|
|
*/
|
|
ret = read_slot_reset_state(pdn, rets);
|
|
|
|
/* If the call to firmware failed, punt */
|
|
if (ret != 0) {
|
|
printk(KERN_WARNING "EEH: read_slot_reset_state() failed; rc=%d dn=%s\n",
|
|
ret, dn->full_name);
|
|
false_positives++;
|
|
pdn->eeh_false_positives ++;
|
|
rc = 0;
|
|
goto dn_unlock;
|
|
}
|
|
|
|
/* Note that config-io to empty slots may fail;
|
|
* they are empty when they don't have children. */
|
|
if ((rets[0] == 5) && (rets[2] == 0) && (dn->child == NULL)) {
|
|
false_positives++;
|
|
pdn->eeh_false_positives ++;
|
|
rc = 0;
|
|
goto dn_unlock;
|
|
}
|
|
|
|
/* If EEH is not supported on this device, punt. */
|
|
if (rets[1] != 1) {
|
|
printk(KERN_WARNING "EEH: event on unsupported device, rc=%d dn=%s\n",
|
|
ret, dn->full_name);
|
|
false_positives++;
|
|
pdn->eeh_false_positives ++;
|
|
rc = 0;
|
|
goto dn_unlock;
|
|
}
|
|
|
|
/* If not the kind of error we know about, punt. */
|
|
if (rets[0] != 1 && rets[0] != 2 && rets[0] != 4 && rets[0] != 5) {
|
|
false_positives++;
|
|
pdn->eeh_false_positives ++;
|
|
rc = 0;
|
|
goto dn_unlock;
|
|
}
|
|
|
|
slot_resets++;
|
|
|
|
/* Avoid repeated reports of this failure, including problems
|
|
* with other functions on this device, and functions under
|
|
* bridges. */
|
|
eeh_mark_slot (dn, EEH_MODE_ISOLATED);
|
|
spin_unlock_irqrestore(&confirm_error_lock, flags);
|
|
|
|
eeh_send_failure_event (dn, dev);
|
|
|
|
/* Most EEH events are due to device driver bugs. Having
|
|
* a stack trace will help the device-driver authors figure
|
|
* out what happened. So print that out. */
|
|
dump_stack();
|
|
return 1;
|
|
|
|
dn_unlock:
|
|
spin_unlock_irqrestore(&confirm_error_lock, flags);
|
|
return rc;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(eeh_dn_check_failure);
|
|
|
|
/**
|
|
* eeh_check_failure - check if all 1's data is due to EEH slot freeze
|
|
* @token i/o token, should be address in the form 0xA....
|
|
* @val value, should be all 1's (XXX why do we need this arg??)
|
|
*
|
|
* Check for an EEH failure at the given token address. Call this
|
|
* routine if the result of a read was all 0xff's and you want to
|
|
* find out if this is due to an EEH slot freeze event. This routine
|
|
* will query firmware for the EEH status.
|
|
*
|
|
* Note this routine is safe to call in an interrupt context.
|
|
*/
|
|
unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val)
|
|
{
|
|
unsigned long addr;
|
|
struct pci_dev *dev;
|
|
struct device_node *dn;
|
|
|
|
/* Finding the phys addr + pci device; this is pretty quick. */
|
|
addr = eeh_token_to_phys((unsigned long __force) token);
|
|
dev = pci_get_device_by_addr(addr);
|
|
if (!dev) {
|
|
no_device++;
|
|
return val;
|
|
}
|
|
|
|
dn = pci_device_to_OF_node(dev);
|
|
eeh_dn_check_failure (dn, dev);
|
|
|
|
pci_dev_put(dev);
|
|
return val;
|
|
}
|
|
|
|
EXPORT_SYMBOL(eeh_check_failure);
|
|
|
|
/* ------------------------------------------------------------- */
|
|
/* The code below deals with error recovery */
|
|
|
|
/**
|
|
* rtas_pci_enable - enable MMIO or DMA transfers for this slot
|
|
* @pdn pci device node
|
|
*/
|
|
|
|
int
|
|
rtas_pci_enable(struct pci_dn *pdn, int function)
|
|
{
|
|
int config_addr;
|
|
int rc;
|
|
|
|
/* Use PE configuration address, if present */
|
|
config_addr = pdn->eeh_config_addr;
|
|
if (pdn->eeh_pe_config_addr)
|
|
config_addr = pdn->eeh_pe_config_addr;
|
|
|
|
rc = rtas_call(ibm_set_eeh_option, 4, 1, NULL,
|
|
config_addr,
|
|
BUID_HI(pdn->phb->buid),
|
|
BUID_LO(pdn->phb->buid),
|
|
function);
|
|
|
|
if (rc)
|
|
printk(KERN_WARNING "EEH: Unexpected state change %d, err=%d dn=%s\n",
|
|
function, rc, pdn->node->full_name);
|
|
|
|
rc = eeh_wait_for_slot_status (pdn, PCI_BUS_RESET_WAIT_MSEC);
|
|
if ((rc == 4) && (function == EEH_THAW_MMIO))
|
|
return 0;
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* rtas_pci_slot_reset - raises/lowers the pci #RST line
|
|
* @pdn pci device node
|
|
* @state: 1/0 to raise/lower the #RST
|
|
*
|
|
* Clear the EEH-frozen condition on a slot. This routine
|
|
* asserts the PCI #RST line if the 'state' argument is '1',
|
|
* and drops the #RST line if 'state is '0'. This routine is
|
|
* safe to call in an interrupt context.
|
|
*
|
|
*/
|
|
|
|
static void
|
|
rtas_pci_slot_reset(struct pci_dn *pdn, int state)
|
|
{
|
|
int config_addr;
|
|
int rc;
|
|
|
|
BUG_ON (pdn==NULL);
|
|
|
|
if (!pdn->phb) {
|
|
printk (KERN_WARNING "EEH: in slot reset, device node %s has no phb\n",
|
|
pdn->node->full_name);
|
|
return;
|
|
}
|
|
|
|
/* Use PE configuration address, if present */
|
|
config_addr = pdn->eeh_config_addr;
|
|
if (pdn->eeh_pe_config_addr)
|
|
config_addr = pdn->eeh_pe_config_addr;
|
|
|
|
rc = rtas_call(ibm_set_slot_reset,4,1, NULL,
|
|
config_addr,
|
|
BUID_HI(pdn->phb->buid),
|
|
BUID_LO(pdn->phb->buid),
|
|
state);
|
|
if (rc)
|
|
printk (KERN_WARNING "EEH: Unable to reset the failed slot,"
|
|
" (%d) #RST=%d dn=%s\n",
|
|
rc, state, pdn->node->full_name);
|
|
}
|
|
|
|
/**
|
|
* pcibios_set_pcie_slot_reset - Set PCI-E reset state
|
|
* @dev: pci device struct
|
|
* @state: reset state to enter
|
|
*
|
|
* Return value:
|
|
* 0 if success
|
|
**/
|
|
int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state)
|
|
{
|
|
struct device_node *dn = pci_device_to_OF_node(dev);
|
|
struct pci_dn *pdn = PCI_DN(dn);
|
|
|
|
switch (state) {
|
|
case pcie_deassert_reset:
|
|
rtas_pci_slot_reset(pdn, 0);
|
|
break;
|
|
case pcie_hot_reset:
|
|
rtas_pci_slot_reset(pdn, 1);
|
|
break;
|
|
case pcie_warm_reset:
|
|
rtas_pci_slot_reset(pdn, 3);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
};
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* rtas_set_slot_reset -- assert the pci #RST line for 1/4 second
|
|
* @pdn: pci device node to be reset.
|
|
*
|
|
* Return 0 if success, else a non-zero value.
|
|
*/
|
|
|
|
static void __rtas_set_slot_reset(struct pci_dn *pdn)
|
|
{
|
|
rtas_pci_slot_reset (pdn, 1);
|
|
|
|
/* The PCI bus requires that the reset be held high for at least
|
|
* a 100 milliseconds. We wait a bit longer 'just in case'. */
|
|
|
|
#define PCI_BUS_RST_HOLD_TIME_MSEC 250
|
|
msleep (PCI_BUS_RST_HOLD_TIME_MSEC);
|
|
|
|
/* We might get hit with another EEH freeze as soon as the
|
|
* pci slot reset line is dropped. Make sure we don't miss
|
|
* these, and clear the flag now. */
|
|
eeh_clear_slot (pdn->node, EEH_MODE_ISOLATED);
|
|
|
|
rtas_pci_slot_reset (pdn, 0);
|
|
|
|
/* After a PCI slot has been reset, the PCI Express spec requires
|
|
* a 1.5 second idle time for the bus to stabilize, before starting
|
|
* up traffic. */
|
|
#define PCI_BUS_SETTLE_TIME_MSEC 1800
|
|
msleep (PCI_BUS_SETTLE_TIME_MSEC);
|
|
}
|
|
|
|
int rtas_set_slot_reset(struct pci_dn *pdn)
|
|
{
|
|
int i, rc;
|
|
|
|
/* Take three shots at resetting the bus */
|
|
for (i=0; i<3; i++) {
|
|
__rtas_set_slot_reset(pdn);
|
|
|
|
rc = eeh_wait_for_slot_status(pdn, PCI_BUS_RESET_WAIT_MSEC);
|
|
if (rc == 0)
|
|
return 0;
|
|
|
|
if (rc < 0) {
|
|
printk(KERN_ERR "EEH: unrecoverable slot failure %s\n",
|
|
pdn->node->full_name);
|
|
return -1;
|
|
}
|
|
printk(KERN_ERR "EEH: bus reset %d failed on slot %s, rc=%d\n",
|
|
i+1, pdn->node->full_name, rc);
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
/* ------------------------------------------------------- */
|
|
/** Save and restore of PCI BARs
|
|
*
|
|
* Although firmware will set up BARs during boot, it doesn't
|
|
* set up device BAR's after a device reset, although it will,
|
|
* if requested, set up bridge configuration. Thus, we need to
|
|
* configure the PCI devices ourselves.
|
|
*/
|
|
|
|
/**
|
|
* __restore_bars - Restore the Base Address Registers
|
|
* @pdn: pci device node
|
|
*
|
|
* Loads the PCI configuration space base address registers,
|
|
* the expansion ROM base address, the latency timer, and etc.
|
|
* from the saved values in the device node.
|
|
*/
|
|
static inline void __restore_bars (struct pci_dn *pdn)
|
|
{
|
|
int i;
|
|
|
|
if (NULL==pdn->phb) return;
|
|
for (i=4; i<10; i++) {
|
|
rtas_write_config(pdn, i*4, 4, pdn->config_space[i]);
|
|
}
|
|
|
|
/* 12 == Expansion ROM Address */
|
|
rtas_write_config(pdn, 12*4, 4, pdn->config_space[12]);
|
|
|
|
#define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF))
|
|
#define SAVED_BYTE(OFF) (((u8 *)(pdn->config_space))[BYTE_SWAP(OFF)])
|
|
|
|
rtas_write_config (pdn, PCI_CACHE_LINE_SIZE, 1,
|
|
SAVED_BYTE(PCI_CACHE_LINE_SIZE));
|
|
|
|
rtas_write_config (pdn, PCI_LATENCY_TIMER, 1,
|
|
SAVED_BYTE(PCI_LATENCY_TIMER));
|
|
|
|
/* max latency, min grant, interrupt pin and line */
|
|
rtas_write_config(pdn, 15*4, 4, pdn->config_space[15]);
|
|
}
|
|
|
|
/**
|
|
* eeh_restore_bars - restore the PCI config space info
|
|
*
|
|
* This routine performs a recursive walk to the children
|
|
* of this device as well.
|
|
*/
|
|
void eeh_restore_bars(struct pci_dn *pdn)
|
|
{
|
|
struct device_node *dn;
|
|
if (!pdn)
|
|
return;
|
|
|
|
if ((pdn->eeh_mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(pdn->class_code))
|
|
__restore_bars (pdn);
|
|
|
|
for_each_child_of_node(pdn->node, dn)
|
|
eeh_restore_bars (PCI_DN(dn));
|
|
}
|
|
|
|
/**
|
|
* eeh_save_bars - save device bars
|
|
*
|
|
* Save the values of the device bars. Unlike the restore
|
|
* routine, this routine is *not* recursive. This is because
|
|
* PCI devices are added individuallly; but, for the restore,
|
|
* an entire slot is reset at a time.
|
|
*/
|
|
static void eeh_save_bars(struct pci_dn *pdn)
|
|
{
|
|
int i;
|
|
|
|
if (!pdn )
|
|
return;
|
|
|
|
for (i = 0; i < 16; i++)
|
|
rtas_read_config(pdn, i * 4, 4, &pdn->config_space[i]);
|
|
}
|
|
|
|
void
|
|
rtas_configure_bridge(struct pci_dn *pdn)
|
|
{
|
|
int config_addr;
|
|
int rc;
|
|
|
|
/* Use PE configuration address, if present */
|
|
config_addr = pdn->eeh_config_addr;
|
|
if (pdn->eeh_pe_config_addr)
|
|
config_addr = pdn->eeh_pe_config_addr;
|
|
|
|
rc = rtas_call(ibm_configure_bridge,3,1, NULL,
|
|
config_addr,
|
|
BUID_HI(pdn->phb->buid),
|
|
BUID_LO(pdn->phb->buid));
|
|
if (rc) {
|
|
printk (KERN_WARNING "EEH: Unable to configure device bridge (%d) for %s\n",
|
|
rc, pdn->node->full_name);
|
|
}
|
|
}
|
|
|
|
/* ------------------------------------------------------------- */
|
|
/* The code below deals with enabling EEH for devices during the
|
|
* early boot sequence. EEH must be enabled before any PCI probing
|
|
* can be done.
|
|
*/
|
|
|
|
#define EEH_ENABLE 1
|
|
|
|
struct eeh_early_enable_info {
|
|
unsigned int buid_hi;
|
|
unsigned int buid_lo;
|
|
};
|
|
|
|
static int get_pe_addr (int config_addr,
|
|
struct eeh_early_enable_info *info)
|
|
{
|
|
unsigned int rets[3];
|
|
int ret;
|
|
|
|
/* Use latest config-addr token on power6 */
|
|
if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) {
|
|
/* Make sure we have a PE in hand */
|
|
ret = rtas_call (ibm_get_config_addr_info2, 4, 2, rets,
|
|
config_addr, info->buid_hi, info->buid_lo, 1);
|
|
if (ret || (rets[0]==0))
|
|
return 0;
|
|
|
|
ret = rtas_call (ibm_get_config_addr_info2, 4, 2, rets,
|
|
config_addr, info->buid_hi, info->buid_lo, 0);
|
|
if (ret)
|
|
return 0;
|
|
return rets[0];
|
|
}
|
|
|
|
/* Use older config-addr token on power5 */
|
|
if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) {
|
|
ret = rtas_call (ibm_get_config_addr_info, 4, 2, rets,
|
|
config_addr, info->buid_hi, info->buid_lo, 0);
|
|
if (ret)
|
|
return 0;
|
|
return rets[0];
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Enable eeh for the given device node. */
|
|
static void *early_enable_eeh(struct device_node *dn, void *data)
|
|
{
|
|
unsigned int rets[3];
|
|
struct eeh_early_enable_info *info = data;
|
|
int ret;
|
|
const char *status = of_get_property(dn, "status", NULL);
|
|
const u32 *class_code = of_get_property(dn, "class-code", NULL);
|
|
const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL);
|
|
const u32 *device_id = of_get_property(dn, "device-id", NULL);
|
|
const u32 *regs;
|
|
int enable;
|
|
struct pci_dn *pdn = PCI_DN(dn);
|
|
|
|
pdn->class_code = 0;
|
|
pdn->eeh_mode = 0;
|
|
pdn->eeh_check_count = 0;
|
|
pdn->eeh_freeze_count = 0;
|
|
pdn->eeh_false_positives = 0;
|
|
|
|
if (status && strncmp(status, "ok", 2) != 0)
|
|
return NULL; /* ignore devices with bad status */
|
|
|
|
/* Ignore bad nodes. */
|
|
if (!class_code || !vendor_id || !device_id)
|
|
return NULL;
|
|
|
|
/* There is nothing to check on PCI to ISA bridges */
|
|
if (dn->type && !strcmp(dn->type, "isa")) {
|
|
pdn->eeh_mode |= EEH_MODE_NOCHECK;
|
|
return NULL;
|
|
}
|
|
pdn->class_code = *class_code;
|
|
|
|
/* Ok... see if this device supports EEH. Some do, some don't,
|
|
* and the only way to find out is to check each and every one. */
|
|
regs = of_get_property(dn, "reg", NULL);
|
|
if (regs) {
|
|
/* First register entry is addr (00BBSS00) */
|
|
/* Try to enable eeh */
|
|
ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL,
|
|
regs[0], info->buid_hi, info->buid_lo,
|
|
EEH_ENABLE);
|
|
|
|
enable = 0;
|
|
if (ret == 0) {
|
|
pdn->eeh_config_addr = regs[0];
|
|
|
|
/* If the newer, better, ibm,get-config-addr-info is supported,
|
|
* then use that instead. */
|
|
pdn->eeh_pe_config_addr = get_pe_addr(pdn->eeh_config_addr, info);
|
|
|
|
/* Some older systems (Power4) allow the
|
|
* ibm,set-eeh-option call to succeed even on nodes
|
|
* where EEH is not supported. Verify support
|
|
* explicitly. */
|
|
ret = read_slot_reset_state(pdn, rets);
|
|
if ((ret == 0) && (rets[1] == 1))
|
|
enable = 1;
|
|
}
|
|
|
|
if (enable) {
|
|
eeh_subsystem_enabled = 1;
|
|
pdn->eeh_mode |= EEH_MODE_SUPPORTED;
|
|
|
|
#ifdef DEBUG
|
|
printk(KERN_DEBUG "EEH: %s: eeh enabled, config=%x pe_config=%x\n",
|
|
dn->full_name, pdn->eeh_config_addr, pdn->eeh_pe_config_addr);
|
|
#endif
|
|
} else {
|
|
|
|
/* This device doesn't support EEH, but it may have an
|
|
* EEH parent, in which case we mark it as supported. */
|
|
if (dn->parent && PCI_DN(dn->parent)
|
|
&& (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) {
|
|
/* Parent supports EEH. */
|
|
pdn->eeh_mode |= EEH_MODE_SUPPORTED;
|
|
pdn->eeh_config_addr = PCI_DN(dn->parent)->eeh_config_addr;
|
|
return NULL;
|
|
}
|
|
}
|
|
} else {
|
|
printk(KERN_WARNING "EEH: %s: unable to get reg property.\n",
|
|
dn->full_name);
|
|
}
|
|
|
|
eeh_save_bars(pdn);
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* Initialize EEH by trying to enable it for all of the adapters in the system.
|
|
* As a side effect we can determine here if eeh is supported at all.
|
|
* Note that we leave EEH on so failed config cycles won't cause a machine
|
|
* check. If a user turns off EEH for a particular adapter they are really
|
|
* telling Linux to ignore errors. Some hardware (e.g. POWER5) won't
|
|
* grant access to a slot if EEH isn't enabled, and so we always enable
|
|
* EEH for all slots/all devices.
|
|
*
|
|
* The eeh-force-off option disables EEH checking globally, for all slots.
|
|
* Even if force-off is set, the EEH hardware is still enabled, so that
|
|
* newer systems can boot.
|
|
*/
|
|
void __init eeh_init(void)
|
|
{
|
|
struct device_node *phb, *np;
|
|
struct eeh_early_enable_info info;
|
|
|
|
spin_lock_init(&confirm_error_lock);
|
|
spin_lock_init(&slot_errbuf_lock);
|
|
|
|
np = of_find_node_by_path("/rtas");
|
|
if (np == NULL)
|
|
return;
|
|
|
|
ibm_set_eeh_option = rtas_token("ibm,set-eeh-option");
|
|
ibm_set_slot_reset = rtas_token("ibm,set-slot-reset");
|
|
ibm_read_slot_reset_state2 = rtas_token("ibm,read-slot-reset-state2");
|
|
ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state");
|
|
ibm_slot_error_detail = rtas_token("ibm,slot-error-detail");
|
|
ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info");
|
|
ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2");
|
|
ibm_configure_bridge = rtas_token ("ibm,configure-bridge");
|
|
|
|
if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE)
|
|
return;
|
|
|
|
eeh_error_buf_size = rtas_token("rtas-error-log-max");
|
|
if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) {
|
|
eeh_error_buf_size = 1024;
|
|
}
|
|
if (eeh_error_buf_size > RTAS_ERROR_LOG_MAX) {
|
|
printk(KERN_WARNING "EEH: rtas-error-log-max is bigger than allocated "
|
|
"buffer ! (%d vs %d)", eeh_error_buf_size, RTAS_ERROR_LOG_MAX);
|
|
eeh_error_buf_size = RTAS_ERROR_LOG_MAX;
|
|
}
|
|
|
|
/* Enable EEH for all adapters. Note that eeh requires buid's */
|
|
for (phb = of_find_node_by_name(NULL, "pci"); phb;
|
|
phb = of_find_node_by_name(phb, "pci")) {
|
|
unsigned long buid;
|
|
|
|
buid = get_phb_buid(phb);
|
|
if (buid == 0 || PCI_DN(phb) == NULL)
|
|
continue;
|
|
|
|
info.buid_lo = BUID_LO(buid);
|
|
info.buid_hi = BUID_HI(buid);
|
|
traverse_pci_devices(phb, early_enable_eeh, &info);
|
|
}
|
|
|
|
if (eeh_subsystem_enabled)
|
|
printk(KERN_INFO "EEH: PCI Enhanced I/O Error Handling Enabled\n");
|
|
else
|
|
printk(KERN_WARNING "EEH: No capable adapters found\n");
|
|
}
|
|
|
|
/**
|
|
* eeh_add_device_early - enable EEH for the indicated device_node
|
|
* @dn: device node for which to set up EEH
|
|
*
|
|
* This routine must be used to perform EEH initialization for PCI
|
|
* devices that were added after system boot (e.g. hotplug, dlpar).
|
|
* This routine must be called before any i/o is performed to the
|
|
* adapter (inluding any config-space i/o).
|
|
* Whether this actually enables EEH or not for this device depends
|
|
* on the CEC architecture, type of the device, on earlier boot
|
|
* command-line arguments & etc.
|
|
*/
|
|
static void eeh_add_device_early(struct device_node *dn)
|
|
{
|
|
struct pci_controller *phb;
|
|
struct eeh_early_enable_info info;
|
|
|
|
if (!dn || !PCI_DN(dn))
|
|
return;
|
|
phb = PCI_DN(dn)->phb;
|
|
|
|
/* USB Bus children of PCI devices will not have BUID's */
|
|
if (NULL == phb || 0 == phb->buid)
|
|
return;
|
|
|
|
info.buid_hi = BUID_HI(phb->buid);
|
|
info.buid_lo = BUID_LO(phb->buid);
|
|
early_enable_eeh(dn, &info);
|
|
}
|
|
|
|
void eeh_add_device_tree_early(struct device_node *dn)
|
|
{
|
|
struct device_node *sib;
|
|
|
|
for_each_child_of_node(dn, sib)
|
|
eeh_add_device_tree_early(sib);
|
|
eeh_add_device_early(dn);
|
|
}
|
|
EXPORT_SYMBOL_GPL(eeh_add_device_tree_early);
|
|
|
|
/**
|
|
* eeh_add_device_late - perform EEH initialization for the indicated pci device
|
|
* @dev: pci device for which to set up EEH
|
|
*
|
|
* This routine must be used to complete EEH initialization for PCI
|
|
* devices that were added after system boot (e.g. hotplug, dlpar).
|
|
*/
|
|
static void eeh_add_device_late(struct pci_dev *dev)
|
|
{
|
|
struct device_node *dn;
|
|
struct pci_dn *pdn;
|
|
|
|
if (!dev || !eeh_subsystem_enabled)
|
|
return;
|
|
|
|
#ifdef DEBUG
|
|
printk(KERN_DEBUG "EEH: adding device %s\n", pci_name(dev));
|
|
#endif
|
|
|
|
pci_dev_get (dev);
|
|
dn = pci_device_to_OF_node(dev);
|
|
pdn = PCI_DN(dn);
|
|
pdn->pcidev = dev;
|
|
|
|
pci_addr_cache_insert_device(dev);
|
|
eeh_sysfs_add_device(dev);
|
|
}
|
|
|
|
void eeh_add_device_tree_late(struct pci_bus *bus)
|
|
{
|
|
struct pci_dev *dev;
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
eeh_add_device_late(dev);
|
|
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
|
|
struct pci_bus *subbus = dev->subordinate;
|
|
if (subbus)
|
|
eeh_add_device_tree_late(subbus);
|
|
}
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(eeh_add_device_tree_late);
|
|
|
|
/**
|
|
* eeh_remove_device - undo EEH setup for the indicated pci device
|
|
* @dev: pci device to be removed
|
|
*
|
|
* This routine should be called when a device is removed from
|
|
* a running system (e.g. by hotplug or dlpar). It unregisters
|
|
* the PCI device from the EEH subsystem. I/O errors affecting
|
|
* this device will no longer be detected after this call; thus,
|
|
* i/o errors affecting this slot may leave this device unusable.
|
|
*/
|
|
static void eeh_remove_device(struct pci_dev *dev)
|
|
{
|
|
struct device_node *dn;
|
|
if (!dev || !eeh_subsystem_enabled)
|
|
return;
|
|
|
|
/* Unregister the device with the EEH/PCI address search system */
|
|
#ifdef DEBUG
|
|
printk(KERN_DEBUG "EEH: remove device %s\n", pci_name(dev));
|
|
#endif
|
|
pci_addr_cache_remove_device(dev);
|
|
eeh_sysfs_remove_device(dev);
|
|
|
|
dn = pci_device_to_OF_node(dev);
|
|
if (PCI_DN(dn)->pcidev) {
|
|
PCI_DN(dn)->pcidev = NULL;
|
|
pci_dev_put (dev);
|
|
}
|
|
}
|
|
|
|
void eeh_remove_bus_device(struct pci_dev *dev)
|
|
{
|
|
struct pci_bus *bus = dev->subordinate;
|
|
struct pci_dev *child, *tmp;
|
|
|
|
eeh_remove_device(dev);
|
|
|
|
if (bus && dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
|
|
list_for_each_entry_safe(child, tmp, &bus->devices, bus_list)
|
|
eeh_remove_bus_device(child);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(eeh_remove_bus_device);
|
|
|
|
static int proc_eeh_show(struct seq_file *m, void *v)
|
|
{
|
|
if (0 == eeh_subsystem_enabled) {
|
|
seq_printf(m, "EEH Subsystem is globally disabled\n");
|
|
seq_printf(m, "eeh_total_mmio_ffs=%ld\n", total_mmio_ffs);
|
|
} else {
|
|
seq_printf(m, "EEH Subsystem is enabled\n");
|
|
seq_printf(m,
|
|
"no device=%ld\n"
|
|
"no device node=%ld\n"
|
|
"no config address=%ld\n"
|
|
"check not wanted=%ld\n"
|
|
"eeh_total_mmio_ffs=%ld\n"
|
|
"eeh_false_positives=%ld\n"
|
|
"eeh_slot_resets=%ld\n",
|
|
no_device, no_dn, no_cfg_addr,
|
|
ignored_check, total_mmio_ffs,
|
|
false_positives,
|
|
slot_resets);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int proc_eeh_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, proc_eeh_show, NULL);
|
|
}
|
|
|
|
static const struct file_operations proc_eeh_operations = {
|
|
.open = proc_eeh_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static int __init eeh_init_proc(void)
|
|
{
|
|
struct proc_dir_entry *e;
|
|
|
|
if (machine_is(pseries)) {
|
|
e = create_proc_entry("ppc64/eeh", 0, NULL);
|
|
if (e)
|
|
e->proc_fops = &proc_eeh_operations;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
__initcall(eeh_init_proc);
|