85 lines
2.5 KiB
Plaintext
85 lines
2.5 KiB
Plaintext
* ROCKCHIP type-c PHY
|
|
---------------------
|
|
|
|
Required properties:
|
|
- compatible : must be "rockchip,rk3399-typec-phy"
|
|
- reg: Address and length of the usb phy control register set
|
|
- rockchip,grf : phandle to the syscon managing the "general
|
|
register files"
|
|
- clocks : phandle + clock specifier for the phy clocks
|
|
- clock-names : string, clock name, must be "tcpdcore", "tcpdphy-ref";
|
|
- assigned-clocks: main clock, should be <&cru SCLK_UPHY0_TCPDCORE> or
|
|
<&cru SCLK_UPHY1_TCPDCORE>;
|
|
- assigned-clock-rates : the phy core clk frequency, shall be: 50000000
|
|
- resets : a list of phandle + reset specifier pairs
|
|
- reset-names : string reset name, must be:
|
|
"uphy", "uphy-pipe", "uphy-tcphy"
|
|
|
|
Optional properties:
|
|
- extcon : extcon specifier for the Power Delivery
|
|
|
|
Required nodes : a sub-node is required for each port the phy provides.
|
|
The sub-node name is used to identify dp or usb3 port,
|
|
and shall be the following entries:
|
|
* "dp-port" : the name of DP port.
|
|
* "usb3-port" : the name of USB3 port.
|
|
|
|
Required properties (port (child) node):
|
|
- #phy-cells : must be 0, See ./phy-bindings.txt for details.
|
|
|
|
Deprecated properties, do not use in new device tree sources, these
|
|
properties are determined by the compatible value:
|
|
- rockchip,typec-conn-dir
|
|
- rockchip,usb3tousb2-en
|
|
- rockchip,external-psm
|
|
- rockchip,pipe-status
|
|
|
|
Example:
|
|
tcphy0: phy@ff7c0000 {
|
|
compatible = "rockchip,rk3399-typec-phy";
|
|
reg = <0x0 0xff7c0000 0x0 0x40000>;
|
|
rockchip,grf = <&grf>;
|
|
extcon = <&fusb0>;
|
|
clocks = <&cru SCLK_UPHY0_TCPDCORE>,
|
|
<&cru SCLK_UPHY0_TCPDPHY_REF>;
|
|
clock-names = "tcpdcore", "tcpdphy-ref";
|
|
assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
|
|
assigned-clock-rates = <50000000>;
|
|
resets = <&cru SRST_UPHY0>,
|
|
<&cru SRST_UPHY0_PIPE_L00>,
|
|
<&cru SRST_P_UPHY0_TCPHY>;
|
|
reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
|
|
|
|
tcphy0_dp: dp-port {
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
tcphy0_usb3: usb3-port {
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|
|
|
|
tcphy1: phy@ff800000 {
|
|
compatible = "rockchip,rk3399-typec-phy";
|
|
reg = <0x0 0xff800000 0x0 0x40000>;
|
|
rockchip,grf = <&grf>;
|
|
extcon = <&fusb1>;
|
|
clocks = <&cru SCLK_UPHY1_TCPDCORE>,
|
|
<&cru SCLK_UPHY1_TCPDPHY_REF>;
|
|
clock-names = "tcpdcore", "tcpdphy-ref";
|
|
assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
|
|
assigned-clock-rates = <50000000>;
|
|
resets = <&cru SRST_UPHY1>,
|
|
<&cru SRST_UPHY1_PIPE_L00>,
|
|
<&cru SRST_P_UPHY1_TCPHY>;
|
|
reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
|
|
|
|
tcphy1_dp: dp-port {
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
tcphy1_usb3: usb3-port {
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|