![David Howells](/assets/img/avatar_default.png)
These patches make the kernel pass 64-bit inode numbers internally when communicating to userspace, even on a 32-bit system. They are required because some filesystems have intrinsic 64-bit inode numbers: NFS3+ and XFS for example. The 64-bit inode numbers are then propagated to userspace automatically where the arch supports it. Problems have been seen with userspace (eg: ld.so) using the 64-bit inode number returned by stat64() or getdents64() to differentiate files, and failing because the 64-bit inode number space was compressed to 32-bits, and so overlaps occur. This patch: Make filldir_t take a 64-bit inode number and struct kstat carry a 64-bit inode number so that 64-bit inode numbers can be passed back to userspace. The stat functions then returns the full 64-bit inode number where available and where possible. If it is not possible to represent the inode number supplied by the filesystem in the field provided by userspace, then error EOVERFLOW will be issued. Similarly, the getdents/readdir functions now pass the full 64-bit inode number to userspace where possible, returning EOVERFLOW instead when a directory entry is encountered that can't be properly represented. Note that this means that some inodes will not be stat'able on a 32-bit system with old libraries where they were before - but it does mean that there will be no ambiguity over what a 32-bit inode number refers to. Note similarly that directory scans may be cut short with an error on a 32-bit system with old libraries where the scan would work before for the same reasons. It is judged unlikely that this situation will occur because modern glibc uses 64-bit capable versions of stat and getdents class functions exclusively, and that older systems are unlikely to encounter unrepresentable inode numbers anyway. [akpm: alpha build fix] Signed-off-by: David Howells <dhowells@redhat.com> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
1336 lines
31 KiB
C
1336 lines
31 KiB
C
/*
|
|
* linux/arch/alpha/kernel/osf_sys.c
|
|
*
|
|
* Copyright (C) 1995 Linus Torvalds
|
|
*/
|
|
|
|
/*
|
|
* This file handles some of the stranger OSF/1 system call interfaces.
|
|
* Some of the system calls expect a non-C calling standard, others have
|
|
* special parameter blocks..
|
|
*/
|
|
|
|
#include <linux/errno.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/smp_lock.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/syscalls.h>
|
|
#include <linux/unistd.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/user.h>
|
|
#include <linux/a.out.h>
|
|
#include <linux/utsname.h>
|
|
#include <linux/time.h>
|
|
#include <linux/timex.h>
|
|
#include <linux/major.h>
|
|
#include <linux/stat.h>
|
|
#include <linux/mman.h>
|
|
#include <linux/shm.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/file.h>
|
|
#include <linux/types.h>
|
|
#include <linux/ipc.h>
|
|
#include <linux/namei.h>
|
|
#include <linux/uio.h>
|
|
#include <linux/vfs.h>
|
|
#include <linux/rcupdate.h>
|
|
|
|
#include <asm/fpu.h>
|
|
#include <asm/io.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/system.h>
|
|
#include <asm/sysinfo.h>
|
|
#include <asm/hwrpb.h>
|
|
#include <asm/processor.h>
|
|
|
|
extern int do_pipe(int *);
|
|
|
|
/*
|
|
* Brk needs to return an error. Still support Linux's brk(0) query idiom,
|
|
* which OSF programs just shouldn't be doing. We're still not quite
|
|
* identical to OSF as we don't return 0 on success, but doing otherwise
|
|
* would require changes to libc. Hopefully this is good enough.
|
|
*/
|
|
asmlinkage unsigned long
|
|
osf_brk(unsigned long brk)
|
|
{
|
|
unsigned long retval = sys_brk(brk);
|
|
if (brk && brk != retval)
|
|
retval = -ENOMEM;
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* This is pure guess-work..
|
|
*/
|
|
asmlinkage int
|
|
osf_set_program_attributes(unsigned long text_start, unsigned long text_len,
|
|
unsigned long bss_start, unsigned long bss_len)
|
|
{
|
|
struct mm_struct *mm;
|
|
|
|
lock_kernel();
|
|
mm = current->mm;
|
|
mm->end_code = bss_start + bss_len;
|
|
mm->brk = bss_start + bss_len;
|
|
#if 0
|
|
printk("set_program_attributes(%lx %lx %lx %lx)\n",
|
|
text_start, text_len, bss_start, bss_len);
|
|
#endif
|
|
unlock_kernel();
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* OSF/1 directory handling functions...
|
|
*
|
|
* The "getdents()" interface is much more sane: the "basep" stuff is
|
|
* braindamage (it can't really handle filesystems where the directory
|
|
* offset differences aren't the same as "d_reclen").
|
|
*/
|
|
#define NAME_OFFSET offsetof (struct osf_dirent, d_name)
|
|
#define ROUND_UP(x) (((x)+3) & ~3)
|
|
|
|
struct osf_dirent {
|
|
unsigned int d_ino;
|
|
unsigned short d_reclen;
|
|
unsigned short d_namlen;
|
|
char d_name[1];
|
|
};
|
|
|
|
struct osf_dirent_callback {
|
|
struct osf_dirent __user *dirent;
|
|
long __user *basep;
|
|
unsigned int count;
|
|
int error;
|
|
};
|
|
|
|
static int
|
|
osf_filldir(void *__buf, const char *name, int namlen, loff_t offset,
|
|
u64 ino, unsigned int d_type)
|
|
{
|
|
struct osf_dirent __user *dirent;
|
|
struct osf_dirent_callback *buf = (struct osf_dirent_callback *) __buf;
|
|
unsigned int reclen = ROUND_UP(NAME_OFFSET + namlen + 1);
|
|
unsigned int d_ino;
|
|
|
|
buf->error = -EINVAL; /* only used if we fail */
|
|
if (reclen > buf->count)
|
|
return -EINVAL;
|
|
d_ino = ino;
|
|
if (sizeof(d_ino) < sizeof(ino) && d_ino != ino)
|
|
return -EOVERFLOW;
|
|
if (buf->basep) {
|
|
if (put_user(offset, buf->basep))
|
|
return -EFAULT;
|
|
buf->basep = NULL;
|
|
}
|
|
dirent = buf->dirent;
|
|
put_user(d_ino, &dirent->d_ino);
|
|
put_user(namlen, &dirent->d_namlen);
|
|
put_user(reclen, &dirent->d_reclen);
|
|
if (copy_to_user(dirent->d_name, name, namlen) ||
|
|
put_user(0, dirent->d_name + namlen))
|
|
return -EFAULT;
|
|
dirent = (void __user *)dirent + reclen;
|
|
buf->dirent = dirent;
|
|
buf->count -= reclen;
|
|
return 0;
|
|
}
|
|
|
|
asmlinkage int
|
|
osf_getdirentries(unsigned int fd, struct osf_dirent __user *dirent,
|
|
unsigned int count, long __user *basep)
|
|
{
|
|
int error;
|
|
struct file *file;
|
|
struct osf_dirent_callback buf;
|
|
|
|
error = -EBADF;
|
|
file = fget(fd);
|
|
if (!file)
|
|
goto out;
|
|
|
|
buf.dirent = dirent;
|
|
buf.basep = basep;
|
|
buf.count = count;
|
|
buf.error = 0;
|
|
|
|
error = vfs_readdir(file, osf_filldir, &buf);
|
|
if (error < 0)
|
|
goto out_putf;
|
|
|
|
error = buf.error;
|
|
if (count != buf.count)
|
|
error = count - buf.count;
|
|
|
|
out_putf:
|
|
fput(file);
|
|
out:
|
|
return error;
|
|
}
|
|
|
|
#undef ROUND_UP
|
|
#undef NAME_OFFSET
|
|
|
|
asmlinkage unsigned long
|
|
osf_mmap(unsigned long addr, unsigned long len, unsigned long prot,
|
|
unsigned long flags, unsigned long fd, unsigned long off)
|
|
{
|
|
struct file *file = NULL;
|
|
unsigned long ret = -EBADF;
|
|
|
|
#if 0
|
|
if (flags & (_MAP_HASSEMAPHORE | _MAP_INHERIT | _MAP_UNALIGNED))
|
|
printk("%s: unimplemented OSF mmap flags %04lx\n",
|
|
current->comm, flags);
|
|
#endif
|
|
if (!(flags & MAP_ANONYMOUS)) {
|
|
file = fget(fd);
|
|
if (!file)
|
|
goto out;
|
|
}
|
|
flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
|
|
down_write(¤t->mm->mmap_sem);
|
|
ret = do_mmap(file, addr, len, prot, flags, off);
|
|
up_write(¤t->mm->mmap_sem);
|
|
if (file)
|
|
fput(file);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
|
|
/*
|
|
* The OSF/1 statfs structure is much larger, but this should
|
|
* match the beginning, at least.
|
|
*/
|
|
struct osf_statfs {
|
|
short f_type;
|
|
short f_flags;
|
|
int f_fsize;
|
|
int f_bsize;
|
|
int f_blocks;
|
|
int f_bfree;
|
|
int f_bavail;
|
|
int f_files;
|
|
int f_ffree;
|
|
__kernel_fsid_t f_fsid;
|
|
};
|
|
|
|
static int
|
|
linux_to_osf_statfs(struct kstatfs *linux_stat, struct osf_statfs __user *osf_stat,
|
|
unsigned long bufsiz)
|
|
{
|
|
struct osf_statfs tmp_stat;
|
|
|
|
tmp_stat.f_type = linux_stat->f_type;
|
|
tmp_stat.f_flags = 0; /* mount flags */
|
|
tmp_stat.f_fsize = linux_stat->f_frsize;
|
|
tmp_stat.f_bsize = linux_stat->f_bsize;
|
|
tmp_stat.f_blocks = linux_stat->f_blocks;
|
|
tmp_stat.f_bfree = linux_stat->f_bfree;
|
|
tmp_stat.f_bavail = linux_stat->f_bavail;
|
|
tmp_stat.f_files = linux_stat->f_files;
|
|
tmp_stat.f_ffree = linux_stat->f_ffree;
|
|
tmp_stat.f_fsid = linux_stat->f_fsid;
|
|
if (bufsiz > sizeof(tmp_stat))
|
|
bufsiz = sizeof(tmp_stat);
|
|
return copy_to_user(osf_stat, &tmp_stat, bufsiz) ? -EFAULT : 0;
|
|
}
|
|
|
|
static int
|
|
do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer,
|
|
unsigned long bufsiz)
|
|
{
|
|
struct kstatfs linux_stat;
|
|
int error = vfs_statfs(dentry, &linux_stat);
|
|
if (!error)
|
|
error = linux_to_osf_statfs(&linux_stat, buffer, bufsiz);
|
|
return error;
|
|
}
|
|
|
|
asmlinkage int
|
|
osf_statfs(char __user *path, struct osf_statfs __user *buffer, unsigned long bufsiz)
|
|
{
|
|
struct nameidata nd;
|
|
int retval;
|
|
|
|
retval = user_path_walk(path, &nd);
|
|
if (!retval) {
|
|
retval = do_osf_statfs(nd.dentry, buffer, bufsiz);
|
|
path_release(&nd);
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
asmlinkage int
|
|
osf_fstatfs(unsigned long fd, struct osf_statfs __user *buffer, unsigned long bufsiz)
|
|
{
|
|
struct file *file;
|
|
int retval;
|
|
|
|
retval = -EBADF;
|
|
file = fget(fd);
|
|
if (file) {
|
|
retval = do_osf_statfs(file->f_dentry, buffer, bufsiz);
|
|
fput(file);
|
|
}
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* Uhh.. OSF/1 mount parameters aren't exactly obvious..
|
|
*
|
|
* Although to be frank, neither are the native Linux/i386 ones..
|
|
*/
|
|
struct ufs_args {
|
|
char __user *devname;
|
|
int flags;
|
|
uid_t exroot;
|
|
};
|
|
|
|
struct cdfs_args {
|
|
char __user *devname;
|
|
int flags;
|
|
uid_t exroot;
|
|
|
|
/* This has lots more here, which Linux handles with the option block
|
|
but I'm too lazy to do the translation into ASCII. */
|
|
};
|
|
|
|
struct procfs_args {
|
|
char __user *devname;
|
|
int flags;
|
|
uid_t exroot;
|
|
};
|
|
|
|
/*
|
|
* We can't actually handle ufs yet, so we translate UFS mounts to
|
|
* ext2fs mounts. I wouldn't mind a UFS filesystem, but the UFS
|
|
* layout is so braindead it's a major headache doing it.
|
|
*
|
|
* Just how long ago was it written? OTOH our UFS driver may be still
|
|
* unhappy with OSF UFS. [CHECKME]
|
|
*/
|
|
static int
|
|
osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
|
|
{
|
|
int retval;
|
|
struct cdfs_args tmp;
|
|
char *devname;
|
|
|
|
retval = -EFAULT;
|
|
if (copy_from_user(&tmp, args, sizeof(tmp)))
|
|
goto out;
|
|
devname = getname(tmp.devname);
|
|
retval = PTR_ERR(devname);
|
|
if (IS_ERR(devname))
|
|
goto out;
|
|
retval = do_mount(devname, dirname, "ext2", flags, NULL);
|
|
putname(devname);
|
|
out:
|
|
return retval;
|
|
}
|
|
|
|
static int
|
|
osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
|
|
{
|
|
int retval;
|
|
struct cdfs_args tmp;
|
|
char *devname;
|
|
|
|
retval = -EFAULT;
|
|
if (copy_from_user(&tmp, args, sizeof(tmp)))
|
|
goto out;
|
|
devname = getname(tmp.devname);
|
|
retval = PTR_ERR(devname);
|
|
if (IS_ERR(devname))
|
|
goto out;
|
|
retval = do_mount(devname, dirname, "iso9660", flags, NULL);
|
|
putname(devname);
|
|
out:
|
|
return retval;
|
|
}
|
|
|
|
static int
|
|
osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags)
|
|
{
|
|
struct procfs_args tmp;
|
|
|
|
if (copy_from_user(&tmp, args, sizeof(tmp)))
|
|
return -EFAULT;
|
|
|
|
return do_mount("", dirname, "proc", flags, NULL);
|
|
}
|
|
|
|
asmlinkage int
|
|
osf_mount(unsigned long typenr, char __user *path, int flag, void __user *data)
|
|
{
|
|
int retval = -EINVAL;
|
|
char *name;
|
|
|
|
lock_kernel();
|
|
|
|
name = getname(path);
|
|
retval = PTR_ERR(name);
|
|
if (IS_ERR(name))
|
|
goto out;
|
|
switch (typenr) {
|
|
case 1:
|
|
retval = osf_ufs_mount(name, data, flag);
|
|
break;
|
|
case 6:
|
|
retval = osf_cdfs_mount(name, data, flag);
|
|
break;
|
|
case 9:
|
|
retval = osf_procfs_mount(name, data, flag);
|
|
break;
|
|
default:
|
|
printk("osf_mount(%ld, %x)\n", typenr, flag);
|
|
}
|
|
putname(name);
|
|
out:
|
|
unlock_kernel();
|
|
return retval;
|
|
}
|
|
|
|
asmlinkage int
|
|
osf_utsname(char __user *name)
|
|
{
|
|
int error;
|
|
|
|
down_read(&uts_sem);
|
|
error = -EFAULT;
|
|
if (copy_to_user(name + 0, utsname()->sysname, 32))
|
|
goto out;
|
|
if (copy_to_user(name + 32, utsname()->nodename, 32))
|
|
goto out;
|
|
if (copy_to_user(name + 64, utsname()->release, 32))
|
|
goto out;
|
|
if (copy_to_user(name + 96, utsname()->version, 32))
|
|
goto out;
|
|
if (copy_to_user(name + 128, utsname()->machine, 32))
|
|
goto out;
|
|
|
|
error = 0;
|
|
out:
|
|
up_read(&uts_sem);
|
|
return error;
|
|
}
|
|
|
|
asmlinkage unsigned long
|
|
sys_getpagesize(void)
|
|
{
|
|
return PAGE_SIZE;
|
|
}
|
|
|
|
asmlinkage unsigned long
|
|
sys_getdtablesize(void)
|
|
{
|
|
return NR_OPEN;
|
|
}
|
|
|
|
/*
|
|
* For compatibility with OSF/1 only. Use utsname(2) instead.
|
|
*/
|
|
asmlinkage int
|
|
osf_getdomainname(char __user *name, int namelen)
|
|
{
|
|
unsigned len;
|
|
int i;
|
|
|
|
if (!access_ok(VERIFY_WRITE, name, namelen))
|
|
return -EFAULT;
|
|
|
|
len = namelen;
|
|
if (namelen > 32)
|
|
len = 32;
|
|
|
|
down_read(&uts_sem);
|
|
for (i = 0; i < len; ++i) {
|
|
__put_user(utsname()->domainname[i], name + i);
|
|
if (utsname()->domainname[i] == '\0')
|
|
break;
|
|
}
|
|
up_read(&uts_sem);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The following stuff should move into a header file should it ever
|
|
* be labeled "officially supported." Right now, there is just enough
|
|
* support to avoid applications (such as tar) printing error
|
|
* messages. The attributes are not really implemented.
|
|
*/
|
|
|
|
/*
|
|
* Values for Property list entry flag
|
|
*/
|
|
#define PLE_PROPAGATE_ON_COPY 0x1 /* cp(1) will copy entry
|
|
by default */
|
|
#define PLE_FLAG_MASK 0x1 /* Valid flag values */
|
|
#define PLE_FLAG_ALL -1 /* All flag value */
|
|
|
|
struct proplistname_args {
|
|
unsigned int pl_mask;
|
|
unsigned int pl_numnames;
|
|
char **pl_names;
|
|
};
|
|
|
|
union pl_args {
|
|
struct setargs {
|
|
char __user *path;
|
|
long follow;
|
|
long nbytes;
|
|
char __user *buf;
|
|
} set;
|
|
struct fsetargs {
|
|
long fd;
|
|
long nbytes;
|
|
char __user *buf;
|
|
} fset;
|
|
struct getargs {
|
|
char __user *path;
|
|
long follow;
|
|
struct proplistname_args __user *name_args;
|
|
long nbytes;
|
|
char __user *buf;
|
|
int __user *min_buf_size;
|
|
} get;
|
|
struct fgetargs {
|
|
long fd;
|
|
struct proplistname_args __user *name_args;
|
|
long nbytes;
|
|
char __user *buf;
|
|
int __user *min_buf_size;
|
|
} fget;
|
|
struct delargs {
|
|
char __user *path;
|
|
long follow;
|
|
struct proplistname_args __user *name_args;
|
|
} del;
|
|
struct fdelargs {
|
|
long fd;
|
|
struct proplistname_args __user *name_args;
|
|
} fdel;
|
|
};
|
|
|
|
enum pl_code {
|
|
PL_SET = 1, PL_FSET = 2,
|
|
PL_GET = 3, PL_FGET = 4,
|
|
PL_DEL = 5, PL_FDEL = 6
|
|
};
|
|
|
|
asmlinkage long
|
|
osf_proplist_syscall(enum pl_code code, union pl_args __user *args)
|
|
{
|
|
long error;
|
|
int __user *min_buf_size_ptr;
|
|
|
|
lock_kernel();
|
|
switch (code) {
|
|
case PL_SET:
|
|
if (get_user(error, &args->set.nbytes))
|
|
error = -EFAULT;
|
|
break;
|
|
case PL_FSET:
|
|
if (get_user(error, &args->fset.nbytes))
|
|
error = -EFAULT;
|
|
break;
|
|
case PL_GET:
|
|
error = get_user(min_buf_size_ptr, &args->get.min_buf_size);
|
|
if (error)
|
|
break;
|
|
error = put_user(0, min_buf_size_ptr);
|
|
break;
|
|
case PL_FGET:
|
|
error = get_user(min_buf_size_ptr, &args->fget.min_buf_size);
|
|
if (error)
|
|
break;
|
|
error = put_user(0, min_buf_size_ptr);
|
|
break;
|
|
case PL_DEL:
|
|
case PL_FDEL:
|
|
error = 0;
|
|
break;
|
|
default:
|
|
error = -EOPNOTSUPP;
|
|
break;
|
|
};
|
|
unlock_kernel();
|
|
return error;
|
|
}
|
|
|
|
asmlinkage int
|
|
osf_sigstack(struct sigstack __user *uss, struct sigstack __user *uoss)
|
|
{
|
|
unsigned long usp = rdusp();
|
|
unsigned long oss_sp = current->sas_ss_sp + current->sas_ss_size;
|
|
unsigned long oss_os = on_sig_stack(usp);
|
|
int error;
|
|
|
|
if (uss) {
|
|
void __user *ss_sp;
|
|
|
|
error = -EFAULT;
|
|
if (get_user(ss_sp, &uss->ss_sp))
|
|
goto out;
|
|
|
|
/* If the current stack was set with sigaltstack, don't
|
|
swap stacks while we are on it. */
|
|
error = -EPERM;
|
|
if (current->sas_ss_sp && on_sig_stack(usp))
|
|
goto out;
|
|
|
|
/* Since we don't know the extent of the stack, and we don't
|
|
track onstack-ness, but rather calculate it, we must
|
|
presume a size. Ho hum this interface is lossy. */
|
|
current->sas_ss_sp = (unsigned long)ss_sp - SIGSTKSZ;
|
|
current->sas_ss_size = SIGSTKSZ;
|
|
}
|
|
|
|
if (uoss) {
|
|
error = -EFAULT;
|
|
if (! access_ok(VERIFY_WRITE, uoss, sizeof(*uoss))
|
|
|| __put_user(oss_sp, &uoss->ss_sp)
|
|
|| __put_user(oss_os, &uoss->ss_onstack))
|
|
goto out;
|
|
}
|
|
|
|
error = 0;
|
|
out:
|
|
return error;
|
|
}
|
|
|
|
asmlinkage long
|
|
osf_sysinfo(int command, char __user *buf, long count)
|
|
{
|
|
char *sysinfo_table[] = {
|
|
utsname()->sysname,
|
|
utsname()->nodename,
|
|
utsname()->release,
|
|
utsname()->version,
|
|
utsname()->machine,
|
|
"alpha", /* instruction set architecture */
|
|
"dummy", /* hardware serial number */
|
|
"dummy", /* hardware manufacturer */
|
|
"dummy", /* secure RPC domain */
|
|
};
|
|
unsigned long offset;
|
|
char *res;
|
|
long len, err = -EINVAL;
|
|
|
|
offset = command-1;
|
|
if (offset >= ARRAY_SIZE(sysinfo_table)) {
|
|
/* Digital UNIX has a few unpublished interfaces here */
|
|
printk("sysinfo(%d)", command);
|
|
goto out;
|
|
}
|
|
|
|
down_read(&uts_sem);
|
|
res = sysinfo_table[offset];
|
|
len = strlen(res)+1;
|
|
if (len > count)
|
|
len = count;
|
|
if (copy_to_user(buf, res, len))
|
|
err = -EFAULT;
|
|
else
|
|
err = 0;
|
|
up_read(&uts_sem);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
asmlinkage unsigned long
|
|
osf_getsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes,
|
|
int __user *start, void __user *arg)
|
|
{
|
|
unsigned long w;
|
|
struct percpu_struct *cpu;
|
|
|
|
switch (op) {
|
|
case GSI_IEEE_FP_CONTROL:
|
|
/* Return current software fp control & status bits. */
|
|
/* Note that DU doesn't verify available space here. */
|
|
|
|
w = current_thread_info()->ieee_state & IEEE_SW_MASK;
|
|
w = swcr_update_status(w, rdfpcr());
|
|
if (put_user(w, (unsigned long __user *) buffer))
|
|
return -EFAULT;
|
|
return 0;
|
|
|
|
case GSI_IEEE_STATE_AT_SIGNAL:
|
|
/*
|
|
* Not sure anybody will ever use this weird stuff. These
|
|
* ops can be used (under OSF/1) to set the fpcr that should
|
|
* be used when a signal handler starts executing.
|
|
*/
|
|
break;
|
|
|
|
case GSI_UACPROC:
|
|
if (nbytes < sizeof(unsigned int))
|
|
return -EINVAL;
|
|
w = (current_thread_info()->flags >> UAC_SHIFT) & UAC_BITMASK;
|
|
if (put_user(w, (unsigned int __user *)buffer))
|
|
return -EFAULT;
|
|
return 1;
|
|
|
|
case GSI_PROC_TYPE:
|
|
if (nbytes < sizeof(unsigned long))
|
|
return -EINVAL;
|
|
cpu = (struct percpu_struct*)
|
|
((char*)hwrpb + hwrpb->processor_offset);
|
|
w = cpu->type;
|
|
if (put_user(w, (unsigned long __user*)buffer))
|
|
return -EFAULT;
|
|
return 1;
|
|
|
|
case GSI_GET_HWRPB:
|
|
if (nbytes < sizeof(*hwrpb))
|
|
return -EINVAL;
|
|
if (copy_to_user(buffer, hwrpb, nbytes) != 0)
|
|
return -EFAULT;
|
|
return 1;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
asmlinkage unsigned long
|
|
osf_setsysinfo(unsigned long op, void __user *buffer, unsigned long nbytes,
|
|
int __user *start, void __user *arg)
|
|
{
|
|
switch (op) {
|
|
case SSI_IEEE_FP_CONTROL: {
|
|
unsigned long swcr, fpcr;
|
|
unsigned int *state;
|
|
|
|
/*
|
|
* Alpha Architecture Handbook 4.7.7.3:
|
|
* To be fully IEEE compiant, we must track the current IEEE
|
|
* exception state in software, because spurrious bits can be
|
|
* set in the trap shadow of a software-complete insn.
|
|
*/
|
|
|
|
if (get_user(swcr, (unsigned long __user *)buffer))
|
|
return -EFAULT;
|
|
state = ¤t_thread_info()->ieee_state;
|
|
|
|
/* Update softare trap enable bits. */
|
|
*state = (*state & ~IEEE_SW_MASK) | (swcr & IEEE_SW_MASK);
|
|
|
|
/* Update the real fpcr. */
|
|
fpcr = rdfpcr() & FPCR_DYN_MASK;
|
|
fpcr |= ieee_swcr_to_fpcr(swcr);
|
|
wrfpcr(fpcr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
case SSI_IEEE_RAISE_EXCEPTION: {
|
|
unsigned long exc, swcr, fpcr, fex;
|
|
unsigned int *state;
|
|
|
|
if (get_user(exc, (unsigned long __user *)buffer))
|
|
return -EFAULT;
|
|
state = ¤t_thread_info()->ieee_state;
|
|
exc &= IEEE_STATUS_MASK;
|
|
|
|
/* Update softare trap enable bits. */
|
|
swcr = (*state & IEEE_SW_MASK) | exc;
|
|
*state |= exc;
|
|
|
|
/* Update the real fpcr. */
|
|
fpcr = rdfpcr();
|
|
fpcr |= ieee_swcr_to_fpcr(swcr);
|
|
wrfpcr(fpcr);
|
|
|
|
/* If any exceptions set by this call, and are unmasked,
|
|
send a signal. Old exceptions are not signaled. */
|
|
fex = (exc >> IEEE_STATUS_TO_EXCSUM_SHIFT) & swcr;
|
|
if (fex) {
|
|
siginfo_t info;
|
|
int si_code = 0;
|
|
|
|
if (fex & IEEE_TRAP_ENABLE_DNO) si_code = FPE_FLTUND;
|
|
if (fex & IEEE_TRAP_ENABLE_INE) si_code = FPE_FLTRES;
|
|
if (fex & IEEE_TRAP_ENABLE_UNF) si_code = FPE_FLTUND;
|
|
if (fex & IEEE_TRAP_ENABLE_OVF) si_code = FPE_FLTOVF;
|
|
if (fex & IEEE_TRAP_ENABLE_DZE) si_code = FPE_FLTDIV;
|
|
if (fex & IEEE_TRAP_ENABLE_INV) si_code = FPE_FLTINV;
|
|
|
|
info.si_signo = SIGFPE;
|
|
info.si_errno = 0;
|
|
info.si_code = si_code;
|
|
info.si_addr = NULL; /* FIXME */
|
|
send_sig_info(SIGFPE, &info, current);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
case SSI_IEEE_STATE_AT_SIGNAL:
|
|
case SSI_IEEE_IGNORE_STATE_AT_SIGNAL:
|
|
/*
|
|
* Not sure anybody will ever use this weird stuff. These
|
|
* ops can be used (under OSF/1) to set the fpcr that should
|
|
* be used when a signal handler starts executing.
|
|
*/
|
|
break;
|
|
|
|
case SSI_NVPAIRS: {
|
|
unsigned long v, w, i;
|
|
unsigned int old, new;
|
|
|
|
for (i = 0; i < nbytes; ++i) {
|
|
|
|
if (get_user(v, 2*i + (unsigned int __user *)buffer))
|
|
return -EFAULT;
|
|
if (get_user(w, 2*i + 1 + (unsigned int __user *)buffer))
|
|
return -EFAULT;
|
|
switch (v) {
|
|
case SSIN_UACPROC:
|
|
again:
|
|
old = current_thread_info()->flags;
|
|
new = old & ~(UAC_BITMASK << UAC_SHIFT);
|
|
new = new | (w & UAC_BITMASK) << UAC_SHIFT;
|
|
if (cmpxchg(¤t_thread_info()->flags,
|
|
old, new) != old)
|
|
goto again;
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
/* Translations due to the fact that OSF's time_t is an int. Which
|
|
affects all sorts of things, like timeval and itimerval. */
|
|
|
|
extern struct timezone sys_tz;
|
|
|
|
struct timeval32
|
|
{
|
|
int tv_sec, tv_usec;
|
|
};
|
|
|
|
struct itimerval32
|
|
{
|
|
struct timeval32 it_interval;
|
|
struct timeval32 it_value;
|
|
};
|
|
|
|
static inline long
|
|
get_tv32(struct timeval *o, struct timeval32 __user *i)
|
|
{
|
|
return (!access_ok(VERIFY_READ, i, sizeof(*i)) ||
|
|
(__get_user(o->tv_sec, &i->tv_sec) |
|
|
__get_user(o->tv_usec, &i->tv_usec)));
|
|
}
|
|
|
|
static inline long
|
|
put_tv32(struct timeval32 __user *o, struct timeval *i)
|
|
{
|
|
return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) ||
|
|
(__put_user(i->tv_sec, &o->tv_sec) |
|
|
__put_user(i->tv_usec, &o->tv_usec)));
|
|
}
|
|
|
|
static inline long
|
|
get_it32(struct itimerval *o, struct itimerval32 __user *i)
|
|
{
|
|
return (!access_ok(VERIFY_READ, i, sizeof(*i)) ||
|
|
(__get_user(o->it_interval.tv_sec, &i->it_interval.tv_sec) |
|
|
__get_user(o->it_interval.tv_usec, &i->it_interval.tv_usec) |
|
|
__get_user(o->it_value.tv_sec, &i->it_value.tv_sec) |
|
|
__get_user(o->it_value.tv_usec, &i->it_value.tv_usec)));
|
|
}
|
|
|
|
static inline long
|
|
put_it32(struct itimerval32 __user *o, struct itimerval *i)
|
|
{
|
|
return (!access_ok(VERIFY_WRITE, o, sizeof(*o)) ||
|
|
(__put_user(i->it_interval.tv_sec, &o->it_interval.tv_sec) |
|
|
__put_user(i->it_interval.tv_usec, &o->it_interval.tv_usec) |
|
|
__put_user(i->it_value.tv_sec, &o->it_value.tv_sec) |
|
|
__put_user(i->it_value.tv_usec, &o->it_value.tv_usec)));
|
|
}
|
|
|
|
static inline void
|
|
jiffies_to_timeval32(unsigned long jiffies, struct timeval32 *value)
|
|
{
|
|
value->tv_usec = (jiffies % HZ) * (1000000L / HZ);
|
|
value->tv_sec = jiffies / HZ;
|
|
}
|
|
|
|
asmlinkage int
|
|
osf_gettimeofday(struct timeval32 __user *tv, struct timezone __user *tz)
|
|
{
|
|
if (tv) {
|
|
struct timeval ktv;
|
|
do_gettimeofday(&ktv);
|
|
if (put_tv32(tv, &ktv))
|
|
return -EFAULT;
|
|
}
|
|
if (tz) {
|
|
if (copy_to_user(tz, &sys_tz, sizeof(sys_tz)))
|
|
return -EFAULT;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
asmlinkage int
|
|
osf_settimeofday(struct timeval32 __user *tv, struct timezone __user *tz)
|
|
{
|
|
struct timespec kts;
|
|
struct timezone ktz;
|
|
|
|
if (tv) {
|
|
if (get_tv32((struct timeval *)&kts, tv))
|
|
return -EFAULT;
|
|
}
|
|
if (tz) {
|
|
if (copy_from_user(&ktz, tz, sizeof(*tz)))
|
|
return -EFAULT;
|
|
}
|
|
|
|
kts.tv_nsec *= 1000;
|
|
|
|
return do_sys_settimeofday(tv ? &kts : NULL, tz ? &ktz : NULL);
|
|
}
|
|
|
|
asmlinkage int
|
|
osf_getitimer(int which, struct itimerval32 __user *it)
|
|
{
|
|
struct itimerval kit;
|
|
int error;
|
|
|
|
error = do_getitimer(which, &kit);
|
|
if (!error && put_it32(it, &kit))
|
|
error = -EFAULT;
|
|
|
|
return error;
|
|
}
|
|
|
|
asmlinkage int
|
|
osf_setitimer(int which, struct itimerval32 __user *in, struct itimerval32 __user *out)
|
|
{
|
|
struct itimerval kin, kout;
|
|
int error;
|
|
|
|
if (in) {
|
|
if (get_it32(&kin, in))
|
|
return -EFAULT;
|
|
} else
|
|
memset(&kin, 0, sizeof(kin));
|
|
|
|
error = do_setitimer(which, &kin, out ? &kout : NULL);
|
|
if (error || !out)
|
|
return error;
|
|
|
|
if (put_it32(out, &kout))
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
asmlinkage int
|
|
osf_utimes(char __user *filename, struct timeval32 __user *tvs)
|
|
{
|
|
struct timeval ktvs[2];
|
|
|
|
if (tvs) {
|
|
if (get_tv32(&ktvs[0], &tvs[0]) ||
|
|
get_tv32(&ktvs[1], &tvs[1]))
|
|
return -EFAULT;
|
|
}
|
|
|
|
return do_utimes(AT_FDCWD, filename, tvs ? ktvs : NULL);
|
|
}
|
|
|
|
#define MAX_SELECT_SECONDS \
|
|
((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1)
|
|
|
|
asmlinkage int
|
|
osf_select(int n, fd_set __user *inp, fd_set __user *outp, fd_set __user *exp,
|
|
struct timeval32 __user *tvp)
|
|
{
|
|
fd_set_bits fds;
|
|
char *bits;
|
|
size_t size;
|
|
long timeout;
|
|
int ret = -EINVAL;
|
|
struct fdtable *fdt;
|
|
int max_fdset;
|
|
|
|
timeout = MAX_SCHEDULE_TIMEOUT;
|
|
if (tvp) {
|
|
time_t sec, usec;
|
|
|
|
if (!access_ok(VERIFY_READ, tvp, sizeof(*tvp))
|
|
|| __get_user(sec, &tvp->tv_sec)
|
|
|| __get_user(usec, &tvp->tv_usec)) {
|
|
ret = -EFAULT;
|
|
goto out_nofds;
|
|
}
|
|
|
|
if (sec < 0 || usec < 0)
|
|
goto out_nofds;
|
|
|
|
if ((unsigned long) sec < MAX_SELECT_SECONDS) {
|
|
timeout = (usec + 1000000/HZ - 1) / (1000000/HZ);
|
|
timeout += sec * (unsigned long) HZ;
|
|
}
|
|
}
|
|
|
|
rcu_read_lock();
|
|
fdt = files_fdtable(current->files);
|
|
max_fdset = fdt->max_fdset;
|
|
rcu_read_unlock();
|
|
if (n < 0 || n > max_fdset)
|
|
goto out_nofds;
|
|
|
|
/*
|
|
* We need 6 bitmaps (in/out/ex for both incoming and outgoing),
|
|
* since we used fdset we need to allocate memory in units of
|
|
* long-words.
|
|
*/
|
|
ret = -ENOMEM;
|
|
size = FDS_BYTES(n);
|
|
bits = kmalloc(6 * size, GFP_KERNEL);
|
|
if (!bits)
|
|
goto out_nofds;
|
|
fds.in = (unsigned long *) bits;
|
|
fds.out = (unsigned long *) (bits + size);
|
|
fds.ex = (unsigned long *) (bits + 2*size);
|
|
fds.res_in = (unsigned long *) (bits + 3*size);
|
|
fds.res_out = (unsigned long *) (bits + 4*size);
|
|
fds.res_ex = (unsigned long *) (bits + 5*size);
|
|
|
|
if ((ret = get_fd_set(n, inp->fds_bits, fds.in)) ||
|
|
(ret = get_fd_set(n, outp->fds_bits, fds.out)) ||
|
|
(ret = get_fd_set(n, exp->fds_bits, fds.ex)))
|
|
goto out;
|
|
zero_fd_set(n, fds.res_in);
|
|
zero_fd_set(n, fds.res_out);
|
|
zero_fd_set(n, fds.res_ex);
|
|
|
|
ret = do_select(n, &fds, &timeout);
|
|
|
|
/* OSF does not copy back the remaining time. */
|
|
|
|
if (ret < 0)
|
|
goto out;
|
|
if (!ret) {
|
|
ret = -ERESTARTNOHAND;
|
|
if (signal_pending(current))
|
|
goto out;
|
|
ret = 0;
|
|
}
|
|
|
|
if (set_fd_set(n, inp->fds_bits, fds.res_in) ||
|
|
set_fd_set(n, outp->fds_bits, fds.res_out) ||
|
|
set_fd_set(n, exp->fds_bits, fds.res_ex))
|
|
ret = -EFAULT;
|
|
|
|
out:
|
|
kfree(bits);
|
|
out_nofds:
|
|
return ret;
|
|
}
|
|
|
|
struct rusage32 {
|
|
struct timeval32 ru_utime; /* user time used */
|
|
struct timeval32 ru_stime; /* system time used */
|
|
long ru_maxrss; /* maximum resident set size */
|
|
long ru_ixrss; /* integral shared memory size */
|
|
long ru_idrss; /* integral unshared data size */
|
|
long ru_isrss; /* integral unshared stack size */
|
|
long ru_minflt; /* page reclaims */
|
|
long ru_majflt; /* page faults */
|
|
long ru_nswap; /* swaps */
|
|
long ru_inblock; /* block input operations */
|
|
long ru_oublock; /* block output operations */
|
|
long ru_msgsnd; /* messages sent */
|
|
long ru_msgrcv; /* messages received */
|
|
long ru_nsignals; /* signals received */
|
|
long ru_nvcsw; /* voluntary context switches */
|
|
long ru_nivcsw; /* involuntary " */
|
|
};
|
|
|
|
asmlinkage int
|
|
osf_getrusage(int who, struct rusage32 __user *ru)
|
|
{
|
|
struct rusage32 r;
|
|
|
|
if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN)
|
|
return -EINVAL;
|
|
|
|
memset(&r, 0, sizeof(r));
|
|
switch (who) {
|
|
case RUSAGE_SELF:
|
|
jiffies_to_timeval32(current->utime, &r.ru_utime);
|
|
jiffies_to_timeval32(current->stime, &r.ru_stime);
|
|
r.ru_minflt = current->min_flt;
|
|
r.ru_majflt = current->maj_flt;
|
|
break;
|
|
case RUSAGE_CHILDREN:
|
|
jiffies_to_timeval32(current->signal->cutime, &r.ru_utime);
|
|
jiffies_to_timeval32(current->signal->cstime, &r.ru_stime);
|
|
r.ru_minflt = current->signal->cmin_flt;
|
|
r.ru_majflt = current->signal->cmaj_flt;
|
|
break;
|
|
}
|
|
|
|
return copy_to_user(ru, &r, sizeof(r)) ? -EFAULT : 0;
|
|
}
|
|
|
|
asmlinkage long
|
|
osf_wait4(pid_t pid, int __user *ustatus, int options,
|
|
struct rusage32 __user *ur)
|
|
{
|
|
struct rusage r;
|
|
long ret, err;
|
|
mm_segment_t old_fs;
|
|
|
|
if (!ur)
|
|
return sys_wait4(pid, ustatus, options, NULL);
|
|
|
|
old_fs = get_fs();
|
|
|
|
set_fs (KERNEL_DS);
|
|
ret = sys_wait4(pid, ustatus, options, (struct rusage __user *) &r);
|
|
set_fs (old_fs);
|
|
|
|
if (!access_ok(VERIFY_WRITE, ur, sizeof(*ur)))
|
|
return -EFAULT;
|
|
|
|
err = 0;
|
|
err |= __put_user(r.ru_utime.tv_sec, &ur->ru_utime.tv_sec);
|
|
err |= __put_user(r.ru_utime.tv_usec, &ur->ru_utime.tv_usec);
|
|
err |= __put_user(r.ru_stime.tv_sec, &ur->ru_stime.tv_sec);
|
|
err |= __put_user(r.ru_stime.tv_usec, &ur->ru_stime.tv_usec);
|
|
err |= __put_user(r.ru_maxrss, &ur->ru_maxrss);
|
|
err |= __put_user(r.ru_ixrss, &ur->ru_ixrss);
|
|
err |= __put_user(r.ru_idrss, &ur->ru_idrss);
|
|
err |= __put_user(r.ru_isrss, &ur->ru_isrss);
|
|
err |= __put_user(r.ru_minflt, &ur->ru_minflt);
|
|
err |= __put_user(r.ru_majflt, &ur->ru_majflt);
|
|
err |= __put_user(r.ru_nswap, &ur->ru_nswap);
|
|
err |= __put_user(r.ru_inblock, &ur->ru_inblock);
|
|
err |= __put_user(r.ru_oublock, &ur->ru_oublock);
|
|
err |= __put_user(r.ru_msgsnd, &ur->ru_msgsnd);
|
|
err |= __put_user(r.ru_msgrcv, &ur->ru_msgrcv);
|
|
err |= __put_user(r.ru_nsignals, &ur->ru_nsignals);
|
|
err |= __put_user(r.ru_nvcsw, &ur->ru_nvcsw);
|
|
err |= __put_user(r.ru_nivcsw, &ur->ru_nivcsw);
|
|
|
|
return err ? err : ret;
|
|
}
|
|
|
|
/*
|
|
* I don't know what the parameters are: the first one
|
|
* seems to be a timeval pointer, and I suspect the second
|
|
* one is the time remaining.. Ho humm.. No documentation.
|
|
*/
|
|
asmlinkage int
|
|
osf_usleep_thread(struct timeval32 __user *sleep, struct timeval32 __user *remain)
|
|
{
|
|
struct timeval tmp;
|
|
unsigned long ticks;
|
|
|
|
if (get_tv32(&tmp, sleep))
|
|
goto fault;
|
|
|
|
ticks = timeval_to_jiffies(&tmp);
|
|
|
|
ticks = schedule_timeout_interruptible(ticks);
|
|
|
|
if (remain) {
|
|
jiffies_to_timeval(ticks, &tmp);
|
|
if (put_tv32(remain, &tmp))
|
|
goto fault;
|
|
}
|
|
|
|
return 0;
|
|
fault:
|
|
return -EFAULT;
|
|
}
|
|
|
|
|
|
struct timex32 {
|
|
unsigned int modes; /* mode selector */
|
|
long offset; /* time offset (usec) */
|
|
long freq; /* frequency offset (scaled ppm) */
|
|
long maxerror; /* maximum error (usec) */
|
|
long esterror; /* estimated error (usec) */
|
|
int status; /* clock command/status */
|
|
long constant; /* pll time constant */
|
|
long precision; /* clock precision (usec) (read only) */
|
|
long tolerance; /* clock frequency tolerance (ppm)
|
|
* (read only)
|
|
*/
|
|
struct timeval32 time; /* (read only) */
|
|
long tick; /* (modified) usecs between clock ticks */
|
|
|
|
long ppsfreq; /* pps frequency (scaled ppm) (ro) */
|
|
long jitter; /* pps jitter (us) (ro) */
|
|
int shift; /* interval duration (s) (shift) (ro) */
|
|
long stabil; /* pps stability (scaled ppm) (ro) */
|
|
long jitcnt; /* jitter limit exceeded (ro) */
|
|
long calcnt; /* calibration intervals (ro) */
|
|
long errcnt; /* calibration errors (ro) */
|
|
long stbcnt; /* stability limit exceeded (ro) */
|
|
|
|
int :32; int :32; int :32; int :32;
|
|
int :32; int :32; int :32; int :32;
|
|
int :32; int :32; int :32; int :32;
|
|
};
|
|
|
|
asmlinkage int
|
|
sys_old_adjtimex(struct timex32 __user *txc_p)
|
|
{
|
|
struct timex txc;
|
|
int ret;
|
|
|
|
/* copy relevant bits of struct timex. */
|
|
if (copy_from_user(&txc, txc_p, offsetof(struct timex32, time)) ||
|
|
copy_from_user(&txc.tick, &txc_p->tick, sizeof(struct timex32) -
|
|
offsetof(struct timex32, time)))
|
|
return -EFAULT;
|
|
|
|
ret = do_adjtimex(&txc);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* copy back to timex32 */
|
|
if (copy_to_user(txc_p, &txc, offsetof(struct timex32, time)) ||
|
|
(copy_to_user(&txc_p->tick, &txc.tick, sizeof(struct timex32) -
|
|
offsetof(struct timex32, tick))) ||
|
|
(put_tv32(&txc_p->time, &txc.time)))
|
|
return -EFAULT;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Get an address range which is currently unmapped. Similar to the
|
|
generic version except that we know how to honor ADDR_LIMIT_32BIT. */
|
|
|
|
static unsigned long
|
|
arch_get_unmapped_area_1(unsigned long addr, unsigned long len,
|
|
unsigned long limit)
|
|
{
|
|
struct vm_area_struct *vma = find_vma(current->mm, addr);
|
|
|
|
while (1) {
|
|
/* At this point: (!vma || addr < vma->vm_end). */
|
|
if (limit - len < addr)
|
|
return -ENOMEM;
|
|
if (!vma || addr + len <= vma->vm_start)
|
|
return addr;
|
|
addr = vma->vm_end;
|
|
vma = vma->vm_next;
|
|
}
|
|
}
|
|
|
|
unsigned long
|
|
arch_get_unmapped_area(struct file *filp, unsigned long addr,
|
|
unsigned long len, unsigned long pgoff,
|
|
unsigned long flags)
|
|
{
|
|
unsigned long limit;
|
|
|
|
/* "32 bit" actually means 31 bit, since pointers sign extend. */
|
|
if (current->personality & ADDR_LIMIT_32BIT)
|
|
limit = 0x80000000;
|
|
else
|
|
limit = TASK_SIZE;
|
|
|
|
if (len > limit)
|
|
return -ENOMEM;
|
|
|
|
/* First, see if the given suggestion fits.
|
|
|
|
The OSF/1 loader (/sbin/loader) relies on us returning an
|
|
address larger than the requested if one exists, which is
|
|
a terribly broken way to program.
|
|
|
|
That said, I can see the use in being able to suggest not
|
|
merely specific addresses, but regions of memory -- perhaps
|
|
this feature should be incorporated into all ports? */
|
|
|
|
if (addr) {
|
|
addr = arch_get_unmapped_area_1 (PAGE_ALIGN(addr), len, limit);
|
|
if (addr != (unsigned long) -ENOMEM)
|
|
return addr;
|
|
}
|
|
|
|
/* Next, try allocating at TASK_UNMAPPED_BASE. */
|
|
addr = arch_get_unmapped_area_1 (PAGE_ALIGN(TASK_UNMAPPED_BASE),
|
|
len, limit);
|
|
if (addr != (unsigned long) -ENOMEM)
|
|
return addr;
|
|
|
|
/* Finally, try allocating in low memory. */
|
|
addr = arch_get_unmapped_area_1 (PAGE_SIZE, len, limit);
|
|
|
|
return addr;
|
|
}
|
|
|
|
#ifdef CONFIG_OSF4_COMPAT
|
|
|
|
/* Clear top 32 bits of iov_len in the user's buffer for
|
|
compatibility with old versions of OSF/1 where iov_len
|
|
was defined as int. */
|
|
static int
|
|
osf_fix_iov_len(const struct iovec __user *iov, unsigned long count)
|
|
{
|
|
unsigned long i;
|
|
|
|
for (i = 0 ; i < count ; i++) {
|
|
int __user *iov_len_high = (int __user *)&iov[i].iov_len + 1;
|
|
|
|
if (put_user(0, iov_len_high))
|
|
return -EFAULT;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
asmlinkage ssize_t
|
|
osf_readv(unsigned long fd, const struct iovec __user * vector, unsigned long count)
|
|
{
|
|
if (unlikely(personality(current->personality) == PER_OSF4))
|
|
if (osf_fix_iov_len(vector, count))
|
|
return -EFAULT;
|
|
return sys_readv(fd, vector, count);
|
|
}
|
|
|
|
asmlinkage ssize_t
|
|
osf_writev(unsigned long fd, const struct iovec __user * vector, unsigned long count)
|
|
{
|
|
if (unlikely(personality(current->personality) == PER_OSF4))
|
|
if (osf_fix_iov_len(vector, count))
|
|
return -EFAULT;
|
|
return sys_writev(fd, vector, count);
|
|
}
|
|
|
|
#endif
|