![Frank Schaefer](/assets/img/avatar_default.png)
'audio_input' better describes the meaning of this field. Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
4901 lines
146 KiB
C
4901 lines
146 KiB
C
/*
|
|
|
|
bttv-cards.c
|
|
|
|
this file has configuration informations - card-specific stuff
|
|
like the big tvcards array for the most part
|
|
|
|
Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
|
|
& Marcus Metzler (mocm@thp.uni-koeln.de)
|
|
(c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 2 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software
|
|
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kmod.h>
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/firmware.h>
|
|
#include <net/checksum.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "bttvp.h"
|
|
#include <media/v4l2-common.h>
|
|
#include <media/tvaudio.h>
|
|
#include "bttv-audio-hook.h"
|
|
|
|
/* fwd decl */
|
|
static void boot_msp34xx(struct bttv *btv, int pin);
|
|
static void hauppauge_eeprom(struct bttv *btv);
|
|
static void avermedia_eeprom(struct bttv *btv);
|
|
static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
|
|
static void modtec_eeprom(struct bttv *btv);
|
|
static void init_PXC200(struct bttv *btv);
|
|
static void init_RTV24(struct bttv *btv);
|
|
|
|
static void rv605_muxsel(struct bttv *btv, unsigned int input);
|
|
static void eagle_muxsel(struct bttv *btv, unsigned int input);
|
|
static void xguard_muxsel(struct bttv *btv, unsigned int input);
|
|
static void ivc120_muxsel(struct bttv *btv, unsigned int input);
|
|
static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
|
|
|
|
static void PXC200_muxsel(struct bttv *btv, unsigned int input);
|
|
|
|
static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
|
|
static void picolo_tetra_init(struct bttv *btv);
|
|
|
|
static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
|
|
static void tibetCS16_init(struct bttv *btv);
|
|
|
|
static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
|
|
static void kodicom4400r_init(struct bttv *btv);
|
|
|
|
static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
|
|
static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
|
|
|
|
static void geovision_muxsel(struct bttv *btv, unsigned int input);
|
|
|
|
static void phytec_muxsel(struct bttv *btv, unsigned int input);
|
|
|
|
static void gv800s_muxsel(struct bttv *btv, unsigned int input);
|
|
static void gv800s_init(struct bttv *btv);
|
|
|
|
static void td3116_muxsel(struct bttv *btv, unsigned int input);
|
|
|
|
static int terratec_active_radio_upgrade(struct bttv *btv);
|
|
static int tea5757_read(struct bttv *btv);
|
|
static int tea5757_write(struct bttv *btv, int value);
|
|
static void identify_by_eeprom(struct bttv *btv,
|
|
unsigned char eeprom_data[256]);
|
|
static int pvr_boot(struct bttv *btv);
|
|
|
|
/* config variables */
|
|
static unsigned int triton1;
|
|
static unsigned int vsfx;
|
|
static unsigned int latency = UNSET;
|
|
int no_overlay=-1;
|
|
|
|
static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
|
|
static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
|
|
static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
|
|
static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
|
|
static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
|
|
static unsigned int audiodev[BTTV_MAX];
|
|
static unsigned int saa6588[BTTV_MAX];
|
|
static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
|
|
static unsigned int autoload = UNSET;
|
|
static unsigned int gpiomask = UNSET;
|
|
static unsigned int audioall = UNSET;
|
|
static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
|
|
|
|
/* insmod options */
|
|
module_param(triton1, int, 0444);
|
|
module_param(vsfx, int, 0444);
|
|
module_param(no_overlay, int, 0444);
|
|
module_param(latency, int, 0444);
|
|
module_param(gpiomask, int, 0444);
|
|
module_param(audioall, int, 0444);
|
|
module_param(autoload, int, 0444);
|
|
|
|
module_param_array(card, int, NULL, 0444);
|
|
module_param_array(pll, int, NULL, 0444);
|
|
module_param_array(tuner, int, NULL, 0444);
|
|
module_param_array(svhs, int, NULL, 0444);
|
|
module_param_array(remote, int, NULL, 0444);
|
|
module_param_array(audiodev, int, NULL, 0444);
|
|
module_param_array(audiomux, int, NULL, 0444);
|
|
|
|
MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
|
|
"[enable bug compatibility for triton1 + others]");
|
|
MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
|
|
"[yet another chipset flaw workaround]");
|
|
MODULE_PARM_DESC(latency,"pci latency timer");
|
|
MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
|
|
MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
|
|
MODULE_PARM_DESC(tuner,"specify installed tuner type");
|
|
MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
|
|
MODULE_PARM_DESC(audiodev, "specify audio device:\n"
|
|
"\t\t-1 = no audio\n"
|
|
"\t\t 0 = autodetect (default)\n"
|
|
"\t\t 1 = msp3400\n"
|
|
"\t\t 2 = tda7432\n"
|
|
"\t\t 3 = tvaudio");
|
|
MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
|
|
MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
|
|
" [some VIA/SIS chipsets are known to have problem with overlay]");
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
/* list of card IDs for bt878+ cards */
|
|
|
|
static struct CARD {
|
|
unsigned id;
|
|
int cardnr;
|
|
char *name;
|
|
} cards[] = {
|
|
{ 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
|
|
{ 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
|
|
{ 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
|
|
{ 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
|
|
{ 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
|
|
{ 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
|
|
{ 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
|
|
{ 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
|
|
{ 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
|
|
|
|
{ 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
|
|
{ 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
|
|
|
|
{ 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
|
|
{ 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
|
|
{ 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
|
|
{ 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
|
|
{ 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
|
|
{ 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
|
|
{ 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
|
|
{ 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
|
|
{ 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
|
|
|
|
{ 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
|
|
/* some cards ship with byteswapped IDs ... */
|
|
{ 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
|
|
{ 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
|
|
/* this seems to happen as well ... */
|
|
{ 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
|
|
|
|
{ 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" },
|
|
{ 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" },
|
|
{ 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
|
|
|
|
{ 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
|
|
{ 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
|
|
{ 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
|
|
{ 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
|
|
{ 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
|
|
{ 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
|
|
{ 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
|
|
|
|
{ 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
|
|
{ 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
|
|
{ 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
|
|
{ 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
|
|
{ 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
|
|
|
|
{ 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
|
|
{ 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
|
|
{ 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
|
|
{ 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
|
|
|
|
{ 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
|
|
{ 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
|
|
/* clashes with FlyVideo
|
|
*{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
|
|
{ 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
|
|
{ 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
|
|
{ 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
|
|
{ 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
|
|
|
|
{ 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
|
|
{ 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
|
|
{ 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
|
|
{ 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
|
|
{ 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
|
|
|
|
{ 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
|
|
{ 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
|
|
{ 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
|
|
{ 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
|
|
{ 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
|
|
|
|
{ 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
|
|
{ 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
|
|
{ 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
|
|
{ 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
|
|
|
|
{ 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
|
|
{ 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
|
|
{ 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
|
|
{ 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
|
|
|
|
{ 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
|
|
{ 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
|
|
{ 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
|
|
{ 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
|
|
{ 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
|
|
{ 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
|
|
{ 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
|
|
{ 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
|
|
{ 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
|
|
{ 0xa1550800, BTTV_BOARD_IVC200, "IVC-200" },
|
|
{ 0xa1550801, BTTV_BOARD_IVC200, "IVC-200" },
|
|
{ 0xa1550802, BTTV_BOARD_IVC200, "IVC-200" },
|
|
{ 0xa1550803, BTTV_BOARD_IVC200, "IVC-200" },
|
|
{ 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
|
|
{ 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
|
|
{ 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
|
|
{ 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
|
|
{ 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
|
|
{ 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
|
|
{ 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
|
|
{ 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
|
|
{ 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
|
|
{ 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
|
|
{ 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
|
|
{ 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
|
|
{ 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
|
|
{ 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
|
|
{ 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
|
|
{ 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
|
|
{ 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" },
|
|
{ 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" },
|
|
{ 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" },
|
|
{ 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" },
|
|
|
|
{ 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
|
|
{ 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
|
|
|
|
{ 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
|
|
{ 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
|
|
{ 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
|
|
{ 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
|
|
{ 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
|
|
{ 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
|
|
|
|
{ 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
|
|
{ 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
|
|
|
|
{ 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
|
|
{ 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
|
|
{ 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
|
|
{ 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" },
|
|
{ 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" },
|
|
{ 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
|
|
{ 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
|
|
{ 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
|
|
{ 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
|
|
{ 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
|
|
|
|
{ 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
|
|
{ 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
|
|
|
|
{ 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
|
|
{ 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
|
|
{ 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
|
|
{ 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
|
|
|
|
{ 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
|
|
|
|
{ 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
|
|
{ 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
|
|
|
|
/* likely broken, vendor id doesn't match the other magic views ...
|
|
* { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
|
|
|
|
/* Duplicate PCI ID, reconfigure for this board during the eeprom read.
|
|
* { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
|
|
|
|
{ 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"},
|
|
|
|
/* DVB cards (using pci function .1 for mpeg data xfer) */
|
|
{ 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
|
|
{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
|
|
{ 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
|
|
{ 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
|
|
{ 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
|
|
{ 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
|
|
{ 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
|
|
{ 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
|
|
{ 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
|
|
{ 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" },
|
|
{ 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
|
|
{ 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "},
|
|
{ 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" },
|
|
{ 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" },
|
|
{ 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" },
|
|
{ 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
|
|
{ 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
|
|
{ 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
|
|
{ 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
|
|
|
|
{ 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" },
|
|
{ 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" },
|
|
{ 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" },
|
|
{ 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" },
|
|
{ 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" },
|
|
{ 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" },
|
|
{ 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" },
|
|
{ 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" },
|
|
{ 0x3116f200, BTTV_BOARD_TVT_TD3116, "Tongwei Video Technology TD-3116" },
|
|
{ 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" },
|
|
{ 0, -1, NULL }
|
|
};
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
/* array with description for bt848 / bt878 tv/grabber cards */
|
|
|
|
struct tvcard bttv_tvcards[] = {
|
|
/* ---- card 0x00 ---------------------------------- */
|
|
[BTTV_BOARD_UNKNOWN] = {
|
|
.name = " *** UNKNOWN/GENERIC *** ",
|
|
.video_inputs = 4,
|
|
.svhs = 2,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_MIRO] = {
|
|
.name = "MIRO PCTV",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 15,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 2, 0, 0, 0 },
|
|
.gpiomute = 10,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_HAUPPAUGE] = {
|
|
.name = "Hauppauge (bt848)",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 7,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 1, 2, 3 },
|
|
.gpiomute = 4,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_STB] = {
|
|
.name = "STB, Gateway P/N 6000699 (bt848)",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 7,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 4, 0, 2, 3 },
|
|
.gpiomute = 1,
|
|
.no_msp34xx = 1,
|
|
.tuner_type = TUNER_PHILIPS_NTSC,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.pll = PLL_28,
|
|
.has_radio = 1,
|
|
},
|
|
|
|
/* ---- card 0x04 ---------------------------------- */
|
|
[BTTV_BOARD_INTEL] = {
|
|
.name = "Intel Create and Share PCI/ Smart Video Recorder III",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 2,
|
|
.gpiomask = 0,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0 },
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_DIAMOND] = {
|
|
.name = "Diamond DTV2000",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 3,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.gpiomux = { 0, 1, 0, 1 },
|
|
.gpiomute = 3,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_AVERMEDIA] = {
|
|
.name = "AVerMedia TVPhone",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 3,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomask = 0x0f,
|
|
.gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
|
|
/* 0x04 for some cards ?? */
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.audio_mode_gpio= avermedia_tvphone_audio,
|
|
.has_remote = 1,
|
|
},
|
|
[BTTV_BOARD_MATRIX_VISION] = {
|
|
.name = "MATRIX-Vision MV-Delta",
|
|
.video_inputs = 5,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 3,
|
|
.gpiomask = 0,
|
|
.muxsel = MUXSEL(2, 3, 1, 0, 0),
|
|
.gpiomux = { 0 },
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
|
|
/* ---- card 0x08 ---------------------------------- */
|
|
[BTTV_BOARD_FLYVIDEO] = {
|
|
.name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0xc00,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 0xc00, 0x800, 0x400 },
|
|
.gpiomute = 0xc00,
|
|
.pll = PLL_28,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_TURBOTV] = {
|
|
.name = "IMS/IXmicro TurboTV",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 3,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 1, 1, 2, 3 },
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_TEMIC_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_HAUPPAUGE878] = {
|
|
.name = "Hauppauge (bt878)",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x0f, /* old: 7 */
|
|
.muxsel = MUXSEL(2, 0, 1, 1),
|
|
.gpiomux = { 0, 1, 2, 3 },
|
|
.gpiomute = 4,
|
|
.pll = PLL_28,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_MIROPRO] = {
|
|
.name = "MIRO PCTV pro",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x3014f,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0x20001,0x10001, 0, 0 },
|
|
.gpiomute = 10,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
|
|
/* ---- card 0x0c ---------------------------------- */
|
|
[BTTV_BOARD_ADSTECH_TV] = {
|
|
.name = "ADS Technologies Channel Surfer TV (bt848)",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 15,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 13, 14, 11, 7 },
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_AVERMEDIA98] = {
|
|
.name = "AVerMedia TVCapture 98",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 4, */
|
|
.svhs = 2,
|
|
.gpiomask = 15,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 13, 14, 11, 7 },
|
|
.msp34xx_alt = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.audio_mode_gpio= avermedia_tv_stereo_audio,
|
|
.no_gpioirq = 1,
|
|
},
|
|
[BTTV_BOARD_VHX] = {
|
|
.name = "Aimslab Video Highway Xtreme (VHX)",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 7,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
|
|
.gpiomute = 4,
|
|
.pll = PLL_28,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_ZOLTRIX] = {
|
|
.name = "Zoltrix TV-Max",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 15,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 0, 1, 0 },
|
|
.gpiomute = 10,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
|
|
/* ---- card 0x10 ---------------------------------- */
|
|
[BTTV_BOARD_PIXVIEWPLAYTV] = {
|
|
.name = "Prolink Pixelview PlayTV (bt878)",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x01fe00,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
/* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
|
|
.gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
|
|
.gpiomute = 0x002000,
|
|
.pll = PLL_28,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_WINVIEW_601] = {
|
|
.name = "Leadtek WinView 601",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x8300f8,
|
|
.muxsel = MUXSEL(2, 3, 1, 1, 0),
|
|
.gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
|
|
.gpiomute = 0xcfa007,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.volume_gpio = winview_volume,
|
|
.has_radio = 1,
|
|
},
|
|
[BTTV_BOARD_AVEC_INTERCAP] = {
|
|
.name = "AVEC Intercapture",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 2, */
|
|
.svhs = 2,
|
|
.gpiomask = 0,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 1, 0, 0, 0 },
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_LIFE_FLYKIT] = {
|
|
.name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0x8dff00,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0 },
|
|
.no_msp34xx = 1,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
|
|
/* ---- card 0x14 ---------------------------------- */
|
|
[BTTV_BOARD_CEI_RAFFLES] = {
|
|
.name = "CEI Raffles Card",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 3, */
|
|
.svhs = 2,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_CONFERENCETV] = {
|
|
.name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 2, tuner, line in */
|
|
.svhs = 2,
|
|
.gpiomask = 0x1800,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
|
|
.gpiomute = 0x1800,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL_I,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_PHOEBE_TVMAS] = {
|
|
.name = "Askey CPH050/ Phoebe Tv Master + FM",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0xc00,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 1, 0x800, 0x400 },
|
|
.gpiomute = 0xc00,
|
|
.pll = PLL_28,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_MODTEC_205] = {
|
|
.name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = NO_SVHS,
|
|
.has_dig_in = 1,
|
|
.gpiomask = 7,
|
|
.muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */
|
|
/* .digital_mode= DIGITAL_MODE_CAMERA, */
|
|
.gpiomux = { 0, 0, 0, 0 },
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ALPS_TSBB5_PAL_I,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
|
|
/* ---- card 0x18 ---------------------------------- */
|
|
[BTTV_BOARD_MAGICTVIEW061] = {
|
|
.name = "Askey CPH05X/06X (bt878) [many vendors]",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0xe00,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = {0x400, 0x400, 0x400, 0x400 },
|
|
.gpiomute = 0xc00,
|
|
.pll = PLL_28,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_remote = 1,
|
|
.has_radio = 1, /* not every card has radio */
|
|
},
|
|
[BTTV_BOARD_VOBIS_BOOSTAR] = {
|
|
.name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x1f0fff,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
|
|
.gpiomute = 0x40000,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.audio_mode_gpio= terratv_audio,
|
|
},
|
|
[BTTV_BOARD_HAUPPAUG_WCAM] = {
|
|
.name = "Hauppauge WinCam newer (bt878)",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 3,
|
|
.gpiomask = 7,
|
|
.muxsel = MUXSEL(2, 0, 1, 1),
|
|
.gpiomux = { 0, 1, 2, 3 },
|
|
.gpiomute = 4,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_MAXI] = {
|
|
.name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 2, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x1800,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
|
|
.gpiomute = 0x1800,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_SECAM,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
|
|
/* ---- card 0x1c ---------------------------------- */
|
|
[BTTV_BOARD_TERRATV] = {
|
|
.name = "Terratec TerraTV+ Version 1.1 (bt878)",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x1f0fff,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
|
|
.gpiomute = 0x40000,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.audio_mode_gpio= terratv_audio,
|
|
/* GPIO wiring:
|
|
External 20 pin connector (for Active Radio Upgrade board)
|
|
gpio00: i2c-sda
|
|
gpio01: i2c-scl
|
|
gpio02: om5610-data
|
|
gpio03: om5610-clk
|
|
gpio04: om5610-wre
|
|
gpio05: om5610-stereo
|
|
gpio06: rds6588-davn
|
|
gpio07: Pin 7 n.c.
|
|
gpio08: nIOW
|
|
gpio09+10: nIOR, nSEL ?? (bt878)
|
|
gpio09: nIOR (bt848)
|
|
gpio10: nSEL (bt848)
|
|
Sound Routing:
|
|
gpio16: u2-A0 (1st 4052bt)
|
|
gpio17: u2-A1
|
|
gpio18: u2-nEN
|
|
gpio19: u4-A0 (2nd 4052)
|
|
gpio20: u4-A1
|
|
u4-nEN - GND
|
|
Btspy:
|
|
00000 : Cdrom (internal audio input)
|
|
10000 : ext. Video audio input
|
|
20000 : TV Mono
|
|
a0000 : TV Mono/2
|
|
1a0000 : TV Stereo
|
|
30000 : Radio
|
|
40000 : Mute
|
|
*/
|
|
|
|
},
|
|
[BTTV_BOARD_PXC200] = {
|
|
/* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
|
|
.name = "Imagenation PXC200",
|
|
.video_inputs = 5,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 1, /* was: 4 */
|
|
.gpiomask = 0,
|
|
.muxsel = MUXSEL(2, 3, 1, 0, 0),
|
|
.gpiomux = { 0 },
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.muxsel_hook = PXC200_muxsel,
|
|
|
|
},
|
|
[BTTV_BOARD_FLYVIDEO_98] = {
|
|
.name = "Lifeview FlyVideo 98 LR50",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x1800, /* 0x8dfe00 */
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
|
|
.gpiomute = 0x1800,
|
|
.pll = PLL_28,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_IPROTV] = {
|
|
.name = "Formac iProTV, Formac ProTV I (bt848)",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 3,
|
|
.gpiomask = 1,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 1, 0, 0, 0 },
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
|
|
/* ---- card 0x20 ---------------------------------- */
|
|
[BTTV_BOARD_INTEL_C_S_PCI] = {
|
|
.name = "Intel Create and Share PCI/ Smart Video Recorder III",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 2,
|
|
.gpiomask = 0,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0 },
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_TERRATVALUE] = {
|
|
.name = "Terratec TerraTValue Version Bt878",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0xffff00,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0x500, 0, 0x300, 0x900 },
|
|
.gpiomute = 0x900,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_WINFAST2000] = {
|
|
.name = "Leadtek WinFast 2000/ WinFast 2000 XP",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
/* TV, CVid, SVid, CVid over SVid connector */
|
|
.muxsel = MUXSEL(2, 3, 1, 1, 0),
|
|
/* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
|
|
.gpiomask = 0xb33000,
|
|
.gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
|
|
.gpiomute = 0x800000,
|
|
/* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
|
|
gpio23 -- hef4052:nEnable (0x800000)
|
|
gpio12 -- hef4052:A1
|
|
gpio13 -- hef4052:A0
|
|
0x0000: external audio
|
|
0x1000: FM
|
|
0x2000: TV
|
|
0x3000: n.c.
|
|
Note: There exists another variant "Winfast 2000" with tv stereo !?
|
|
Note: eeprom only contains FF and pci subsystem id 107d:6606
|
|
*/
|
|
.pll = PLL_28,
|
|
.has_radio = 1,
|
|
.tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
|
|
.tuner_addr = ADDR_UNSET,
|
|
.audio_mode_gpio= winfast2000_audio,
|
|
.has_remote = 1,
|
|
},
|
|
[BTTV_BOARD_CHRONOS_VS2] = {
|
|
.name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 3, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x1800,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
|
|
.gpiomute = 0x1800,
|
|
.pll = PLL_28,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
|
|
/* ---- card 0x24 ---------------------------------- */
|
|
[BTTV_BOARD_TYPHOON_TVIEW] = {
|
|
.name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 3, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x1800,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
|
|
.gpiomute = 0x1800,
|
|
.pll = PLL_28,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_radio = 1,
|
|
},
|
|
[BTTV_BOARD_PXELVWPLTVPRO] = {
|
|
.name = "Prolink PixelView PlayTV pro",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0xff,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0x21, 0x20, 0x24, 0x2c },
|
|
.gpiomute = 0x29,
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_MAGICTVIEW063] = {
|
|
.name = "Askey CPH06X TView99",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x551e00,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.gpiomux = { 0x551400, 0x551200, 0, 0 },
|
|
.gpiomute = 0x551c00,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL_I,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_remote = 1,
|
|
},
|
|
[BTTV_BOARD_PINNACLE] = {
|
|
.name = "Pinnacle PCTV Studio/Rave",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x03000F,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 2, 0xd0001, 0, 0 },
|
|
.gpiomute = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
|
|
/* ---- card 0x28 ---------------------------------- */
|
|
[BTTV_BOARD_STB2] = {
|
|
.name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 7,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 4, 0, 2, 3 },
|
|
.gpiomute = 1,
|
|
.no_msp34xx = 1,
|
|
.tuner_type = TUNER_PHILIPS_NTSC,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.pll = PLL_28,
|
|
.has_radio = 1,
|
|
},
|
|
[BTTV_BOARD_AVPHONE98] = {
|
|
.name = "AVerMedia TVPhone 98",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 4, */
|
|
.svhs = 2,
|
|
.gpiomask = 15,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 13, 4, 11, 7 },
|
|
.pll = PLL_28,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_radio = 1,
|
|
.audio_mode_gpio= avermedia_tvphone_audio,
|
|
},
|
|
[BTTV_BOARD_PV951] = {
|
|
.name = "ProVideo PV951", /* pic16c54 */
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 0, 0, 0},
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL_I,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_ONAIR_TV] = {
|
|
.name = "Little OnAir TV",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0xe00b,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
|
|
.gpiomute = 0xff3ffc,
|
|
.no_msp34xx = 1,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
|
|
/* ---- card 0x2c ---------------------------------- */
|
|
[BTTV_BOARD_SIGMA_TVII_FM] = {
|
|
.name = "Sigma TVII-FM",
|
|
.video_inputs = 2,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 3,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 1, 1, 0, 2 },
|
|
.gpiomute = 3,
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_NONE,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_MATRIX_VISION2] = {
|
|
.name = "MATRIX-Vision MV-Delta 2",
|
|
.video_inputs = 5,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 3,
|
|
.gpiomask = 0,
|
|
.muxsel = MUXSEL(2, 3, 1, 0, 0),
|
|
.gpiomux = { 0 },
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_ZOLTRIX_GENIE] = {
|
|
.name = "Zoltrix Genie TV/FM",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0xbcf03f,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
|
|
.gpiomute = 0xbcb03f,
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_TEMIC_4039FR5_NTSC,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_TERRATVRADIO] = {
|
|
.name = "Terratec TV/Radio+",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x70000,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
|
|
.gpiomute = 0x40000,
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_35,
|
|
.tuner_type = TUNER_PHILIPS_PAL_I,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_radio = 1,
|
|
},
|
|
|
|
/* ---- card 0x30 ---------------------------------- */
|
|
[BTTV_BOARD_DYNALINK] = {
|
|
.name = "Askey CPH03x/ Dynalink Magic TView",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 15,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = {2,0,0,0 },
|
|
.gpiomute = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_GVBCTV3PCI] = {
|
|
.name = "IODATA GV-BCTV3/PCI",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x010f00,
|
|
.muxsel = MUXSEL(2, 3, 0, 0),
|
|
.gpiomux = {0x10000, 0, 0x10000, 0 },
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ALPS_TSHC6_NTSC,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.audio_mode_gpio= gvbctv3pci_audio,
|
|
},
|
|
[BTTV_BOARD_PXELVWPLTVPAK] = {
|
|
.name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
|
|
.video_inputs = 5,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 3,
|
|
.has_dig_in = 1,
|
|
.gpiomask = 0xAA0000,
|
|
.muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
|
|
/* .digital_mode= DIGITAL_MODE_CAMERA, */
|
|
.gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
|
|
.gpiomute = 0xa8000,
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL_I,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_remote = 1,
|
|
/* GPIO wiring: (different from Rev.4C !)
|
|
GPIO17: U4.A0 (first hef4052bt)
|
|
GPIO19: U4.A1
|
|
GPIO20: U5.A1 (second hef4052bt)
|
|
GPIO21: U4.nEN
|
|
GPIO22: BT832 Reset Line
|
|
GPIO23: A5,A0, U5,nEN
|
|
Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
|
|
*/
|
|
},
|
|
[BTTV_BOARD_EAGLE] = {
|
|
.name = "Eagle Wireless Capricorn2 (bt878A)",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 7,
|
|
.muxsel = MUXSEL(2, 0, 1, 1),
|
|
.gpiomux = { 0, 1, 2, 3 },
|
|
.gpiomute = 4,
|
|
.pll = PLL_28,
|
|
.tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
|
|
/* ---- card 0x34 ---------------------------------- */
|
|
[BTTV_BOARD_PINNACLEPRO] = {
|
|
/* David Härdeman <david@2gen.com> */
|
|
.name = "Pinnacle PCTV Studio Pro",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 3,
|
|
.gpiomask = 0x03000F,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 1, 0xd0001, 0, 0 },
|
|
.gpiomute = 10,
|
|
/* sound path (5 sources):
|
|
MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
|
|
0= ext. Audio IN
|
|
1= from MUX2
|
|
2= Mono TV sound from Tuner
|
|
3= not connected
|
|
MUX2 (mask 0x30000):
|
|
0,2,3= from MSP34xx
|
|
1= FM stereo Radio from Tuner */
|
|
.pll = PLL_28,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_TVIEW_RDS_FM] = {
|
|
/* Claas Langbehn <claas@bigfoot.com>,
|
|
Sven Grothklags <sven@upb.de> */
|
|
.name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 3, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x1c,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 0, 0x10, 8 },
|
|
.gpiomute = 4,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_radio = 1,
|
|
},
|
|
[BTTV_BOARD_LIFETEC_9415] = {
|
|
/* Tim Röstermundt <rosterm@uni-muenster.de>
|
|
in de.comp.os.unix.linux.hardware:
|
|
options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
|
|
gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
|
|
options tuner type=5 */
|
|
.name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x18e0,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
|
|
.gpiomute = 0x18e0,
|
|
/* For cards with tda9820/tda9821:
|
|
0x0000: Tuner normal stereo
|
|
0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
|
|
0x0880: Tuner A2 stereo */
|
|
.pll = PLL_28,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_BESTBUY_EASYTV] = {
|
|
/* Miguel Angel Alvarez <maacruz@navegalia.com>
|
|
old Easy TV BT848 version (model CPH031) */
|
|
.name = "Askey CPH031/ BESTBUY Easy TV",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0xF,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.gpiomux = { 2, 0, 0, 0 },
|
|
.gpiomute = 10,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_TEMIC_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
|
|
/* ---- card 0x38 ---------------------------------- */
|
|
[BTTV_BOARD_FLYVIDEO_98FM] = {
|
|
/* Gordon Heydon <gjheydon@bigfoot.com ('98) */
|
|
.name = "Lifeview FlyVideo 98FM LR50",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 3, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x1800,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
|
|
.gpiomute = 0x1800,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
/* This is the ultimate cheapo capture card
|
|
* just a BT848A on a small PCB!
|
|
* Steve Hosgood <steve@equiinet.com> */
|
|
[BTTV_BOARD_GRANDTEC] = {
|
|
.name = "GrandTec 'Grand Video Capture' (Bt848)",
|
|
.video_inputs = 2,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 1,
|
|
.gpiomask = 0,
|
|
.muxsel = MUXSEL(3, 1),
|
|
.gpiomux = { 0 },
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_35,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_ASKEY_CPH060] = {
|
|
/* Daniel Herrington <daniel.herrington@home.com> */
|
|
.name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0xe00,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0x400, 0x400, 0x400, 0x400 },
|
|
.gpiomute = 0x800,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_TEMIC_4036FY5_NTSC,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_ASKEY_CPH03X] = {
|
|
/* Matti Mottus <mottus@physic.ut.ee> */
|
|
.name = "Askey CPH03x TV Capturer",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x03000F,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.gpiomux = { 2, 0, 0, 0 },
|
|
.gpiomute = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_TEMIC_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_remote = 1,
|
|
},
|
|
|
|
/* ---- card 0x3c ---------------------------------- */
|
|
[BTTV_BOARD_MM100PCTV] = {
|
|
/* Philip Blundell <philb@gnu.org> */
|
|
.name = "Modular Technology MM100PCTV",
|
|
.video_inputs = 2,
|
|
/* .audio_inputs= 2, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 11,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 2, 0, 0, 1 },
|
|
.gpiomute = 8,
|
|
.pll = PLL_35,
|
|
.tuner_type = TUNER_TEMIC_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_GMV1] = {
|
|
/* Adrian Cox <adrian@humboldt.co.uk */
|
|
.name = "AG Electronics GMV1",
|
|
.video_inputs = 2,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 1,
|
|
.gpiomask = 0xF,
|
|
.muxsel = MUXSEL(2, 2),
|
|
.gpiomux = { },
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_BESTBUY_EASYTV2] = {
|
|
/* Miguel Angel Alvarez <maacruz@navegalia.com>
|
|
new Easy TV BT878 version (model CPH061)
|
|
special thanks to Informatica Mieres for providing the card */
|
|
.name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 2, */
|
|
.svhs = 2,
|
|
.gpiomask = 0xFF,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.gpiomux = { 1, 0, 4, 4 },
|
|
.gpiomute = 9,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_ATI_TVWONDER] = {
|
|
/* Lukas Gebauer <geby@volny.cz> */
|
|
.name = "ATI TV-Wonder",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0xf03f,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.gpiomux = { 0xbffe, 0, 0xbfff, 0 },
|
|
.gpiomute = 0xbffe,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
|
|
/* ---- card 0x40 ---------------------------------- */
|
|
[BTTV_BOARD_ATI_TVWONDERVE] = {
|
|
/* Lukas Gebauer <geby@volny.cz> */
|
|
.name = "ATI TV-Wonder VE",
|
|
.video_inputs = 2,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 1,
|
|
.muxsel = MUXSEL(2, 3, 0, 1),
|
|
.gpiomux = { 0, 0, 1, 0 },
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_FLYVIDEO2000] = {
|
|
/* DeeJay <deejay@westel900.net (2000S) */
|
|
.name = "Lifeview FlyVideo 2000S LR90",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 3, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x18e0,
|
|
.muxsel = MUXSEL(2, 3, 0, 1),
|
|
/* Radio changed from 1e80 to 0x800 to make
|
|
FlyVideo2000S in .hu happy (gm)*/
|
|
/* -dk-???: set mute=0x1800 for tda9874h daughterboard */
|
|
.gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
|
|
.gpiomute = 0x1800,
|
|
.audio_mode_gpio= fv2000s_audio,
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_TERRATVALUER] = {
|
|
.name = "Terratec TValueRadio",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0xffff00,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0x500, 0x500, 0x300, 0x900 },
|
|
.gpiomute = 0x900,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_radio = 1,
|
|
},
|
|
[BTTV_BOARD_GVBCTV4PCI] = {
|
|
/* TANAKA Kei <peg00625@nifty.com> */
|
|
.name = "IODATA GV-BCTV4/PCI",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x010f00,
|
|
.muxsel = MUXSEL(2, 3, 0, 0),
|
|
.gpiomux = {0x10000, 0, 0x10000, 0 },
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.audio_mode_gpio= gvbctv3pci_audio,
|
|
},
|
|
|
|
/* ---- card 0x44 ---------------------------------- */
|
|
[BTTV_BOARD_VOODOOTV_FM] = {
|
|
.name = "3Dfx VoodooTV FM (Euro)",
|
|
/* try "insmod msp3400 simple=0" if you have
|
|
* sound problems with this card. */
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0x4f8a00,
|
|
/* 0x100000: 1=MSP enabled (0=disable again)
|
|
* 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
|
|
.gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
|
|
.gpiomute = 0x947fff,
|
|
/* tvtuner, radio, external,internal, mute, stereo
|
|
* tuner, Composit, SVid, Composit-on-Svid-adapter */
|
|
.muxsel = MUXSEL(2, 3, 0, 1),
|
|
.tuner_type = TUNER_MT2032,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.pll = PLL_28,
|
|
.has_radio = 1,
|
|
},
|
|
[BTTV_BOARD_VOODOOTV_200] = {
|
|
.name = "VoodooTV 200 (USA)",
|
|
/* try "insmod msp3400 simple=0" if you have
|
|
* sound problems with this card. */
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0x4f8a00,
|
|
/* 0x100000: 1=MSP enabled (0=disable again)
|
|
* 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
|
|
.gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
|
|
.gpiomute = 0x947fff,
|
|
/* tvtuner, radio, external,internal, mute, stereo
|
|
* tuner, Composit, SVid, Composit-on-Svid-adapter */
|
|
.muxsel = MUXSEL(2, 3, 0, 1),
|
|
.tuner_type = TUNER_MT2032,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.pll = PLL_28,
|
|
.has_radio = 1,
|
|
},
|
|
[BTTV_BOARD_AIMMS] = {
|
|
/* Philip Blundell <pb@nexus.co.uk> */
|
|
.name = "Active Imaging AIMMS",
|
|
.video_inputs = 1,
|
|
/* .audio_inputs= 0, */
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.pll = PLL_28,
|
|
.muxsel = MUXSEL(2),
|
|
.gpiomask = 0
|
|
},
|
|
[BTTV_BOARD_PV_BT878P_PLUS] = {
|
|
/* Tomasz Pyra <hellfire@sedez.iq.pl> */
|
|
.name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 4, */
|
|
.svhs = 2,
|
|
.gpiomask = 15,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
|
|
.gpiomute = 13,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_LG_PAL_I_FM,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_remote = 1,
|
|
/* GPIO wiring:
|
|
GPIO0: U4.A0 (hef4052bt)
|
|
GPIO1: U4.A1
|
|
GPIO2: U4.A1 (second hef4052bt)
|
|
GPIO3: U4.nEN, U5.A0, A5.nEN
|
|
GPIO8-15: vrd866b ?
|
|
*/
|
|
},
|
|
[BTTV_BOARD_FLYVIDEO98EZ] = {
|
|
.name = "Lifeview FlyVideo 98EZ (capture only) LR51",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 2,
|
|
/* AV1, AV2, SVHS, CVid adapter on SVHS */
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.pll = PLL_28,
|
|
.no_msp34xx = 1,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
|
|
/* ---- card 0x48 ---------------------------------- */
|
|
[BTTV_BOARD_PV_BT878P_9B] = {
|
|
/* Dariusz Kowalewski <darekk@automex.pl> */
|
|
.name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x3f,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0x01, 0x00, 0x03, 0x03 },
|
|
.gpiomute = 0x09,
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
|
|
.has_radio = 1, /* Note: not all cards have radio */
|
|
.has_remote = 1,
|
|
/* GPIO wiring:
|
|
GPIO0: A0 hef4052
|
|
GPIO1: A1 hef4052
|
|
GPIO3: nEN hef4052
|
|
GPIO8-15: vrd866b
|
|
GPIO20,22,23: R30,R29,R28
|
|
*/
|
|
},
|
|
[BTTV_BOARD_SENSORAY311_611] = {
|
|
/* Clay Kunz <ckunz@mail.arc.nasa.gov> */
|
|
/* you must jumper JP5 for the 311 card (PC/104+) to work */
|
|
.name = "Sensoray 311/611",
|
|
.video_inputs = 5,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 4,
|
|
.gpiomask = 0,
|
|
.muxsel = MUXSEL(2, 3, 1, 0, 0),
|
|
.gpiomux = { 0 },
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_RV605] = {
|
|
/* Miguel Freitas <miguel@cetuc.puc-rio.br> */
|
|
.name = "RemoteVision MX (RV605)",
|
|
.video_inputs = 16,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0x00,
|
|
.gpiomask2 = 0x07ff,
|
|
.muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
|
|
.no_msp34xx = 1,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.muxsel_hook = rv605_muxsel,
|
|
},
|
|
[BTTV_BOARD_POWERCLR_MTV878] = {
|
|
.name = "Powercolor MTV878/ MTV878R/ MTV878F",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 2, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
|
|
.muxsel = MUXSEL(2, 1, 1),
|
|
.gpiomux = { 0, 1, 2, 2 },
|
|
.gpiomute = 4,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.pll = PLL_28,
|
|
.has_radio = 1,
|
|
},
|
|
|
|
/* ---- card 0x4c ---------------------------------- */
|
|
[BTTV_BOARD_WINDVR] = {
|
|
/* Masaki Suzuki <masaki@btree.org> */
|
|
.name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x140007,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 1, 2, 3 },
|
|
.gpiomute = 4,
|
|
.tuner_type = TUNER_PHILIPS_NTSC,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.audio_mode_gpio= windvr_audio,
|
|
},
|
|
[BTTV_BOARD_GRANDTEC_MULTI] = {
|
|
.name = "GrandTec Multi Capture Card (Bt878)",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.gpiomux = { 0 },
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_KWORLD] = {
|
|
.name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 3, */
|
|
.svhs = 2,
|
|
.gpiomask = 7,
|
|
/* Tuner, SVid, SVHS, SVid to SVHS connector */
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
|
|
* This card lacks external Audio In, so we mute it on Ext. & Int.
|
|
* The PCB can take a sbx1637/sbx1673, wiring unknown.
|
|
* This card lacks PCI subsystem ID, sigh.
|
|
* gpiomux =1: lower volume, 2+3: mute
|
|
* btwincap uses 0x80000/0x80003
|
|
*/
|
|
.gpiomute = 4,
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
/* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
|
|
radio signal strength indicators work fine. */
|
|
.has_radio = 1,
|
|
/* GPIO Info:
|
|
GPIO0,1: HEF4052 A0,A1
|
|
GPIO2: HEF4052 nENABLE
|
|
GPIO3-7: n.c.
|
|
GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
|
|
GPIO14,15: ??
|
|
GPIO16-21: n.c.
|
|
GPIO22,23: ??
|
|
?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
|
|
},
|
|
[BTTV_BOARD_DSP_TCVIDEO] = {
|
|
/* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
|
|
.name = "DSP Design TCVIDEO",
|
|
.video_inputs = 4,
|
|
.svhs = NO_SVHS,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.pll = PLL_28,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
|
|
/* ---- card 0x50 ---------------------------------- */
|
|
[BTTV_BOARD_HAUPPAUGEPVR] = {
|
|
.name = "Hauppauge WinTV PVR",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.muxsel = MUXSEL(2, 0, 1, 1),
|
|
.pll = PLL_28,
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
|
|
.gpiomask = 7,
|
|
.gpiomux = {7},
|
|
},
|
|
[BTTV_BOARD_GVBCTV5PCI] = {
|
|
.name = "IODATA GV-BCTV5/PCI",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x0f0f80,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.gpiomux = {0x030000, 0x010000, 0, 0 },
|
|
.gpiomute = 0x020000,
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_NTSC_M,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.audio_mode_gpio= gvbctv5pci_audio,
|
|
.has_radio = 1,
|
|
},
|
|
[BTTV_BOARD_OSPREY1x0] = {
|
|
.name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
|
|
.video_inputs = 4, /* id-inputs-clock */
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 3,
|
|
.muxsel = MUXSEL(3, 2, 0, 1),
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
},
|
|
[BTTV_BOARD_OSPREY1x0_848] = {
|
|
.name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 2,
|
|
.muxsel = MUXSEL(2, 3, 1),
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
},
|
|
|
|
/* ---- card 0x54 ---------------------------------- */
|
|
[BTTV_BOARD_OSPREY101_848] = {
|
|
.name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
|
|
.video_inputs = 2,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 1,
|
|
.muxsel = MUXSEL(3, 1),
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
},
|
|
[BTTV_BOARD_OSPREY1x1] = {
|
|
.name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
|
|
.video_inputs = 1,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = NO_SVHS,
|
|
.muxsel = MUXSEL(0),
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
},
|
|
[BTTV_BOARD_OSPREY1x1_SVID] = {
|
|
.name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
|
|
.video_inputs = 2,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 1,
|
|
.muxsel = MUXSEL(0, 1),
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
},
|
|
[BTTV_BOARD_OSPREY2xx] = {
|
|
.name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
|
|
.video_inputs = 1,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = NO_SVHS,
|
|
.muxsel = MUXSEL(0),
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
},
|
|
|
|
/* ---- card 0x58 ---------------------------------- */
|
|
[BTTV_BOARD_OSPREY2x0_SVID] = {
|
|
.name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
|
|
.video_inputs = 2,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 1,
|
|
.muxsel = MUXSEL(0, 1),
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
},
|
|
[BTTV_BOARD_OSPREY2x0] = {
|
|
.name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
|
|
.video_inputs = 2,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 1,
|
|
.muxsel = MUXSEL(2, 3),
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
},
|
|
[BTTV_BOARD_OSPREY500] = {
|
|
.name = "Osprey 500", /* 500 */
|
|
.video_inputs = 2,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 1,
|
|
.muxsel = MUXSEL(2, 3),
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
},
|
|
[BTTV_BOARD_OSPREY540] = {
|
|
.name = "Osprey 540", /* 540 */
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
},
|
|
|
|
/* ---- card 0x5C ---------------------------------- */
|
|
[BTTV_BOARD_OSPREY2000] = {
|
|
.name = "Osprey 2000", /* 2000 */
|
|
.video_inputs = 2,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 1,
|
|
.muxsel = MUXSEL(2, 3),
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
|
|
},
|
|
[BTTV_BOARD_IDS_EAGLE] = {
|
|
/* M G Berberich <berberic@forwiss.uni-passau.de> */
|
|
.name = "IDS Eagle",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 0, */
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0,
|
|
.muxsel = MUXSEL(2, 2, 2, 2),
|
|
.muxsel_hook = eagle_muxsel,
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
},
|
|
[BTTV_BOARD_PINNACLESAT] = {
|
|
.name = "Pinnacle PCTV Sat",
|
|
.video_inputs = 2,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 1,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.muxsel = MUXSEL(3, 1),
|
|
.pll = PLL_28,
|
|
.no_gpioirq = 1,
|
|
.has_dvb = 1,
|
|
},
|
|
[BTTV_BOARD_FORMAC_PROTV] = {
|
|
.name = "Formac ProTV II (bt878)",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 3,
|
|
.gpiomask = 2,
|
|
/* TV, Comp1, Composite over SVID con, SVID */
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 2, 2, 0, 0 },
|
|
.pll = PLL_28,
|
|
.has_radio = 1,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
/* sound routing:
|
|
GPIO=0x00,0x01,0x03: mute (?)
|
|
0x02: both TV and radio (tuner: FM1216/I)
|
|
The card has onboard audio connectors labeled "cdrom" and "board",
|
|
not soldered here, though unknown wiring.
|
|
Card lacks: external audio in, pci subsystem id.
|
|
*/
|
|
},
|
|
|
|
/* ---- card 0x60 ---------------------------------- */
|
|
[BTTV_BOARD_MACHTV] = {
|
|
.name = "MachTV",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 7,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 1, 2, 3},
|
|
.gpiomute = 4,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.pll = PLL_28,
|
|
},
|
|
[BTTV_BOARD_EURESYS_PICOLO] = {
|
|
.name = "Euresys Picolo",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 2,
|
|
.gpiomask = 0,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.muxsel = MUXSEL(2, 0, 1),
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_PV150] = {
|
|
/* Luc Van Hoeylandt <luc@e-magic.be> */
|
|
.name = "ProVideo PV150", /* 0x4f */
|
|
.video_inputs = 2,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0,
|
|
.muxsel = MUXSEL(2, 3),
|
|
.gpiomux = { 0 },
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_AD_TVK503] = {
|
|
/* Hiroshi Takekawa <sian@big.or.jp> */
|
|
/* This card lacks subsystem ID */
|
|
.name = "AD-TVK503", /* 0x63 */
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x001e8007,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
/* Tuner, Radio, external, internal, off, on */
|
|
.gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
|
|
.gpiomute = 0x0f,
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_NTSC,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.audio_mode_gpio= adtvk503_audio,
|
|
},
|
|
|
|
/* ---- card 0x64 ---------------------------------- */
|
|
[BTTV_BOARD_HERCULES_SM_TV] = {
|
|
.name = "Hercules Smart TV Stereo",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x00,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
/* Notes:
|
|
- card lacks subsystem ID
|
|
- stereo variant w/ daughter board with tda9874a @0xb0
|
|
- Audio Routing:
|
|
always from tda9874 independent of GPIO (?)
|
|
external line in: unknown
|
|
- Other chips: em78p156elp @ 0x96 (probably IR remote control)
|
|
hef4053 (instead 4052) for unknown function
|
|
*/
|
|
},
|
|
[BTTV_BOARD_PACETV] = {
|
|
.name = "Pace TV & Radio Card",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
/* Tuner, CVid, SVid, CVid over SVid connector */
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomask = 0,
|
|
.no_tda7432 = 1,
|
|
.tuner_type = TUNER_PHILIPS_PAL_I,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_radio = 1,
|
|
.pll = PLL_28,
|
|
/* Bt878, Bt832, FI1246 tuner; no pci subsystem id
|
|
only internal line out: (4pin header) RGGL
|
|
Radio must be decoded by msp3410d (not routed through)*/
|
|
/*
|
|
.digital_mode = DIGITAL_MODE_CAMERA, todo!
|
|
*/
|
|
},
|
|
[BTTV_BOARD_IVC200] = {
|
|
/* Chris Willing <chris@vislab.usyd.edu.au> */
|
|
.name = "IVC-200",
|
|
.video_inputs = 1,
|
|
/* .audio_inputs= 0, */
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0xdf,
|
|
.muxsel = MUXSEL(2),
|
|
.pll = PLL_28,
|
|
},
|
|
[BTTV_BOARD_IVCE8784] = {
|
|
.name = "IVCE-8784",
|
|
.video_inputs = 1,
|
|
/* .audio_inputs= 0, */
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0xdf,
|
|
.muxsel = MUXSEL(2),
|
|
.pll = PLL_28,
|
|
},
|
|
[BTTV_BOARD_XGUARD] = {
|
|
.name = "Grand X-Guard / Trust 814PCI",
|
|
.video_inputs = 16,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = NO_SVHS,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.gpiomask2 = 0xff,
|
|
.muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
|
|
.muxsel_hook = xguard_muxsel,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.pll = PLL_28,
|
|
},
|
|
|
|
/* ---- card 0x68 ---------------------------------- */
|
|
[BTTV_BOARD_NEBULA_DIGITV] = {
|
|
.name = "Nebula Electronics DigiTV",
|
|
.video_inputs = 1,
|
|
.svhs = NO_SVHS,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_dvb = 1,
|
|
.has_remote = 1,
|
|
.gpiomask = 0x1b,
|
|
.no_gpioirq = 1,
|
|
},
|
|
[BTTV_BOARD_PV143] = {
|
|
/* Jorge Boncompte - DTI2 <jorge@dti2.net> */
|
|
.name = "ProVideo PV143",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.gpiomux = { 0 },
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
|
|
/* M.Klahr@phytec.de */
|
|
.name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 3,
|
|
.gpiomask = 0x00,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_VD009X1_VD011_COMBI] = {
|
|
.name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 3,
|
|
.gpiomask = 0x00,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
|
|
/* ---- card 0x6c ---------------------------------- */
|
|
[BTTV_BOARD_VD009_MINIDIN] = {
|
|
.name = "PHYTEC VD-009 MiniDIN (bt878)",
|
|
.video_inputs = 10,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 9,
|
|
.gpiomask = 0x00,
|
|
.gpiomask2 = 0x03, /* used for external vodeo mux */
|
|
.muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
|
|
.muxsel_hook = phytec_muxsel,
|
|
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_VD009_COMBI] = {
|
|
.name = "PHYTEC VD-009 Combi (bt878)",
|
|
.video_inputs = 10,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 9,
|
|
.gpiomask = 0x00,
|
|
.gpiomask2 = 0x03, /* used for external vodeo mux */
|
|
.muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
|
|
.muxsel_hook = phytec_muxsel,
|
|
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_IVC100] = {
|
|
.name = "IVC-100",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 0, */
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0xdf,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.pll = PLL_28,
|
|
},
|
|
[BTTV_BOARD_IVC120] = {
|
|
/* IVC-120G - Alan Garfield <alan@fromorbit.com> */
|
|
.name = "IVC-120G",
|
|
.video_inputs = 16,
|
|
/* .audio_inputs= 0, */
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.svhs = NO_SVHS, /* card has no svhs */
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.gpiomask = 0x00,
|
|
.muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
|
|
.muxsel_hook = ivc120_muxsel,
|
|
.pll = PLL_28,
|
|
},
|
|
|
|
/* ---- card 0x70 ---------------------------------- */
|
|
[BTTV_BOARD_PC_HDTV] = {
|
|
.name = "pcHDTV HD-2000 TV",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.tuner_type = TUNER_PHILIPS_FCV1236D,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_dvb = 1,
|
|
},
|
|
[BTTV_BOARD_TWINHAN_DST] = {
|
|
.name = "Twinhan DST + clones",
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.no_video = 1,
|
|
.has_dvb = 1,
|
|
},
|
|
[BTTV_BOARD_WINFASTVC100] = {
|
|
.name = "Winfast VC100",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 1,
|
|
/* Vid In, SVid In, Vid over SVid in connector */
|
|
.muxsel = MUXSEL(3, 1, 1, 3),
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.pll = PLL_28,
|
|
},
|
|
[BTTV_BOARD_TEV560] = {
|
|
.name = "Teppro TEV-560/InterVision IV-560",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 3,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 1, 1, 1, 1 },
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.pll = PLL_35,
|
|
},
|
|
|
|
/* ---- card 0x74 ---------------------------------- */
|
|
[BTTV_BOARD_SIMUS_GVC1100] = {
|
|
.name = "SIMUS GVC1100",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = NO_SVHS,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.pll = PLL_28,
|
|
.muxsel = MUXSEL(2, 2, 2, 2),
|
|
.gpiomask = 0x3F,
|
|
.muxsel_hook = gvc1100_muxsel,
|
|
},
|
|
[BTTV_BOARD_NGSTV_PLUS] = {
|
|
/* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
|
|
.name = "NGS NGSTV+",
|
|
.video_inputs = 3,
|
|
.svhs = 2,
|
|
.gpiomask = 0x008007,
|
|
.muxsel = MUXSEL(2, 3, 0, 0),
|
|
.gpiomux = { 0, 0, 0, 0 },
|
|
.gpiomute = 0x000003,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_remote = 1,
|
|
},
|
|
[BTTV_BOARD_LMLBT4] = {
|
|
/* http://linuxmedialabs.com */
|
|
.name = "LMLBT4",
|
|
.video_inputs = 4, /* IN1,IN2,IN3,IN4 */
|
|
/* .audio_inputs= 0, */
|
|
.svhs = NO_SVHS,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_TEKRAM_M205] = {
|
|
/* Helmroos Harri <harri.helmroos@pp.inet.fi> */
|
|
.name = "Tekram M205 PRO",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.svhs = 2,
|
|
.gpiomask = 0x68,
|
|
.muxsel = MUXSEL(2, 3, 1),
|
|
.gpiomux = { 0x68, 0x68, 0x61, 0x61 },
|
|
.pll = PLL_28,
|
|
},
|
|
|
|
/* ---- card 0x78 ---------------------------------- */
|
|
[BTTV_BOARD_CONTVFMI] = {
|
|
/* Javier Cendan Ares <jcendan@lycos.es> */
|
|
/* bt878 TV + FM without subsystem ID */
|
|
.name = "Conceptronic CONTVFMi",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x008007,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 1, 2, 2 },
|
|
.gpiomute = 3,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_remote = 1,
|
|
.has_radio = 1,
|
|
},
|
|
[BTTV_BOARD_PICOLO_TETRA_CHIP] = {
|
|
/*Eric DEBIEF <debief@telemsa.com>*/
|
|
/*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
|
|
/* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
|
|
/*0x79 in bttv.h*/
|
|
.name = "Euresys Picolo Tetra",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0,
|
|
.gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
/*878A input is always MUX0, see above.*/
|
|
.muxsel = MUXSEL(2, 2, 2, 2),
|
|
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
|
|
.pll = PLL_28,
|
|
.muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_SPIRIT_TV] = {
|
|
/* Spirit TV Tuner from http://spiritmodems.com.au */
|
|
/* Stafford Goodsell <surge@goliath.homeunix.org> */
|
|
.name = "Spirit TV Tuner",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x0000000f,
|
|
.muxsel = MUXSEL(2, 1, 1),
|
|
.gpiomux = { 0x02, 0x00, 0x00, 0x00 },
|
|
.tuner_type = TUNER_TEMIC_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.no_msp34xx = 1,
|
|
},
|
|
[BTTV_BOARD_AVDVBT_771] = {
|
|
/* Wolfram Joost <wojo@frokaschwei.de> */
|
|
.name = "AVerMedia AVerTV DVB-T 771",
|
|
.video_inputs = 2,
|
|
.svhs = 1,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.muxsel = MUXSEL(3, 3),
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.pll = PLL_28,
|
|
.has_dvb = 1,
|
|
.no_gpioirq = 1,
|
|
.has_remote = 1,
|
|
},
|
|
/* ---- card 0x7c ---------------------------------- */
|
|
[BTTV_BOARD_AVDVBT_761] = {
|
|
/* Matt Jesson <dvb@jesson.eclipse.co.uk> */
|
|
/* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
|
|
.name = "AverMedia AverTV DVB-T 761",
|
|
.video_inputs = 2,
|
|
.svhs = 1,
|
|
.muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_dvb = 1,
|
|
.no_gpioirq = 1,
|
|
.has_remote = 1,
|
|
},
|
|
[BTTV_BOARD_MATRIX_VISIONSQ] = {
|
|
/* andre.schwarz@matrix-vision.de */
|
|
.name = "MATRIX Vision Sigma-SQ",
|
|
.video_inputs = 16,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0x0,
|
|
.muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
|
|
.muxsel_hook = sigmaSQ_muxsel,
|
|
.gpiomux = { 0 },
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_MATRIX_VISIONSLC] = {
|
|
/* andre.schwarz@matrix-vision.de */
|
|
.name = "MATRIX Vision Sigma-SLC",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0x0,
|
|
.muxsel = MUXSEL(2, 2, 2, 2),
|
|
.muxsel_hook = sigmaSLC_muxsel,
|
|
.gpiomux = { 0 },
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
/* BTTV_BOARD_APAC_VIEWCOMP */
|
|
[BTTV_BOARD_APAC_VIEWCOMP] = {
|
|
/* Attila Kondoros <attila.kondoros@chello.hu> */
|
|
/* bt878 TV + FM 0x00000000 subsystem ID */
|
|
.name = "APAC Viewcomp 878(AMAX)",
|
|
.video_inputs = 2,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0xFF,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 2, 0, 0, 0 },
|
|
.gpiomute = 10,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
|
|
.has_radio = 1, /* not every card has radio */
|
|
},
|
|
|
|
/* ---- card 0x80 ---------------------------------- */
|
|
[BTTV_BOARD_DVICO_DVBT_LITE] = {
|
|
/* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
|
|
.name = "DViCO FusionHDTV DVB-T Lite",
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.pll = PLL_28,
|
|
.no_video = 1,
|
|
.has_dvb = 1,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_VGEAR_MYVCD] = {
|
|
/* Steven <photon38@pchome.com.tw> */
|
|
.name = "V-Gear MyVCD",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x3f,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.gpiomux = {0x31, 0x31, 0x31, 0x31 },
|
|
.gpiomute = 0x31,
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_NTSC_M,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_radio = 0,
|
|
},
|
|
[BTTV_BOARD_SUPER_TV] = {
|
|
/* Rick C <cryptdragoon@gmail.com> */
|
|
.name = "Super TV Tuner",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.tuner_type = TUNER_PHILIPS_NTSC,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.gpiomask = 0x008007,
|
|
.gpiomux = { 0, 0x000001,0,0 },
|
|
.has_radio = 1,
|
|
},
|
|
[BTTV_BOARD_TIBET_CS16] = {
|
|
/* Chris Fanning <video4linux@haydon.net> */
|
|
.name = "Tibet Systems 'Progress DVR' CS16",
|
|
.video_inputs = 16,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = NO_SVHS,
|
|
.muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
|
|
.pll = PLL_28,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.muxsel_hook = tibetCS16_muxsel,
|
|
},
|
|
[BTTV_BOARD_KODICOM_4400R] = {
|
|
/* Bill Brack <wbrack@mmm.com.hk> */
|
|
/*
|
|
* Note that, because of the card's wiring, the "master"
|
|
* BT878A chip (i.e. the one which controls the analog switch
|
|
* and must use this card type) is the 2nd one detected. The
|
|
* other 3 chips should use card type 0x85, whose description
|
|
* follows this one. There is a EEPROM on the card (which is
|
|
* connected to the I2C of one of those other chips), but is
|
|
* not currently handled. There is also a facility for a
|
|
* "monitor", which is also not currently implemented.
|
|
*/
|
|
.name = "Kodicom 4400R (master)",
|
|
.video_inputs = 16,
|
|
/* .audio_inputs= 0, */
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.svhs = NO_SVHS,
|
|
/* GPIO bits 0-9 used for analog switch:
|
|
* 00 - 03: camera selector
|
|
* 04 - 06: channel (controller) selector
|
|
* 07: data (1->on, 0->off)
|
|
* 08: strobe
|
|
* 09: reset
|
|
* bit 16 is input from sync separator for the channel
|
|
*/
|
|
.gpiomask = 0x0003ff,
|
|
.no_gpioirq = 1,
|
|
.muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
|
|
.pll = PLL_28,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.muxsel_hook = kodicom4400r_muxsel,
|
|
},
|
|
[BTTV_BOARD_KODICOM_4400R_SL] = {
|
|
/* Bill Brack <wbrack@mmm.com.hk> */
|
|
/* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
|
|
* one which controls the analog switch, and must use the card type)
|
|
* is the 2nd one detected. The other 3 chips should use this card
|
|
* type
|
|
*/
|
|
.name = "Kodicom 4400R (slave)",
|
|
.video_inputs = 16,
|
|
/* .audio_inputs= 0, */
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0x010000,
|
|
.no_gpioirq = 1,
|
|
.muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
|
|
.pll = PLL_28,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.muxsel_hook = kodicom4400r_muxsel,
|
|
},
|
|
/* ---- card 0x86---------------------------------- */
|
|
[BTTV_BOARD_ADLINK_RTV24] = {
|
|
/* Michael Henson <mhenson@clarityvi.com> */
|
|
/* Adlink RTV24 with special unlock codes */
|
|
.name = "Adlink RTV24",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.tuner_type = UNSET,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.pll = PLL_28,
|
|
},
|
|
/* ---- card 0x87---------------------------------- */
|
|
[BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
|
|
/* Michael Krufky <mkrufky@m1k.net> */
|
|
.name = "DViCO FusionHDTV 5 Lite",
|
|
.tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
|
|
.tuner_addr = ADDR_UNSET,
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.muxsel = MUXSEL(2, 3, 1),
|
|
.gpiomask = 0x00e00007,
|
|
.gpiomux = { 0x00400005, 0, 0x00000001, 0 },
|
|
.gpiomute = 0x00c00007,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.has_dvb = 1,
|
|
},
|
|
/* ---- card 0x88---------------------------------- */
|
|
[BTTV_BOARD_ACORP_Y878F] = {
|
|
/* Mauro Carvalho Chehab <mchehab@infradead.org> */
|
|
.name = "Acorp Y878F",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x01fe00,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
|
|
.gpiomute = 0x002000,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
|
|
.tuner_addr = 0xc1 >>1,
|
|
.has_radio = 1,
|
|
},
|
|
/* ---- card 0x89 ---------------------------------- */
|
|
[BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
|
|
.name = "Conceptronic CTVFMi v2",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x001c0007,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 1, 2, 2 },
|
|
.gpiomute = 3,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_TENA_9533_DI,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_remote = 1,
|
|
.has_radio = 1,
|
|
},
|
|
/* ---- card 0x8a ---------------------------------- */
|
|
[BTTV_BOARD_PV_BT878P_2E] = {
|
|
.name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
|
|
.video_inputs = 5,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 3,
|
|
.has_dig_in = 1,
|
|
.gpiomask = 0x01fe00,
|
|
.muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
|
|
/* .digital_mode= DIGITAL_MODE_CAMERA, */
|
|
.gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
|
|
.gpiomute = 0x12400,
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_LG_PAL_FM,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_remote = 1,
|
|
},
|
|
/* ---- card 0x8b ---------------------------------- */
|
|
[BTTV_BOARD_PV_M4900] = {
|
|
/* Sérgio Fortier <sergiofortier@yahoo.com.br> */
|
|
.name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x3f,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0x21, 0x20, 0x24, 0x2c },
|
|
.gpiomute = 0x29,
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_YMEC_TVF_5533MF,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_radio = 1,
|
|
.has_remote = 1,
|
|
},
|
|
/* ---- card 0x8c ---------------------------------- */
|
|
/* Has four Bt878 chips behind a PCI bridge, each chip has:
|
|
one external BNC composite input (mux 2)
|
|
three internal composite inputs (unknown muxes)
|
|
an 18-bit stereo A/D (CS5331A), which has:
|
|
one external stereo unblanced (RCA) audio connection
|
|
one (or 3?) internal stereo balanced (XLR) audio connection
|
|
input is selected via gpio to a 14052B mux
|
|
(mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
|
|
gain is controlled via an X9221A chip on the I2C bus @0x28
|
|
sample rate is controlled via gpio to an MK1413S
|
|
(mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
|
|
There is neither a tuner nor an svideo input. */
|
|
[BTTV_BOARD_OSPREY440] = {
|
|
.name = "Osprey 440",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 2, */
|
|
.svhs = NO_SVHS,
|
|
.muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
|
|
.gpiomask = 0x303,
|
|
.gpiomute = 0x000, /* int + 32kHz */
|
|
.gpiomux = { 0, 0, 0x000, 0x100},
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
},
|
|
/* ---- card 0x8d ---------------------------------- */
|
|
[BTTV_BOARD_ASOUND_SKYEYE] = {
|
|
.name = "Asound Skyeye PCTV",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 15,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 2, 0, 0, 0 },
|
|
.gpiomute = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_NTSC,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
/* ---- card 0x8e ---------------------------------- */
|
|
[BTTV_BOARD_SABRENT_TVFM] = {
|
|
.name = "Sabrent TV-FM (bttv version)",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x108007,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 100000, 100002, 100002, 100000 },
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_TNF_5335MF,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.has_radio = 1,
|
|
},
|
|
/* ---- card 0x8f ---------------------------------- */
|
|
[BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
|
|
.name = "Hauppauge ImpactVCB (bt878)",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0x0f, /* old: 7 */
|
|
.muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_MACHTV_MAGICTV] = {
|
|
/* Julian Calaby <julian.calaby@gmail.com>
|
|
* Slightly different from original MachTV definition (0x60)
|
|
|
|
* FIXME: RegSpy says gpiomask should be "0x001c800f", but it
|
|
* stuffs up remote chip. Bug is a pin on the jaecs is not set
|
|
* properly (methinks) causing no keyup bits being set */
|
|
|
|
.name = "MagicTV", /* rebranded MachTV */
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 7,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 1, 2, 3 },
|
|
.gpiomute = 4,
|
|
.tuner_type = TUNER_TEMIC_4009FR5_PAL,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.pll = PLL_28,
|
|
.has_radio = 1,
|
|
.has_remote = 1,
|
|
},
|
|
[BTTV_BOARD_SSAI_SECURITY] = {
|
|
.name = "SSAI Security Video Interface",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = NO_SVHS,
|
|
.muxsel = MUXSEL(0, 1, 2, 3),
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_SSAI_ULTRASOUND] = {
|
|
.name = "SSAI Ultrasound Video Interface",
|
|
.video_inputs = 2,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 1,
|
|
.muxsel = MUXSEL(2, 0, 1, 3),
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
/* ---- card 0x94---------------------------------- */
|
|
[BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
|
|
.name = "DViCO FusionHDTV 2",
|
|
.tuner_type = TUNER_PHILIPS_FCV1236D,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.muxsel = MUXSEL(2, 3, 1),
|
|
.gpiomask = 0x00e00007,
|
|
.gpiomux = { 0x00400005, 0, 0x00000001, 0 },
|
|
.gpiomute = 0x00c00007,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
},
|
|
/* ---- card 0x95---------------------------------- */
|
|
[BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
|
|
.name = "Typhoon TV-Tuner PCI (50684)",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x3014f,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0x20001,0x10001, 0, 0 },
|
|
.gpiomute = 10,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_PHILIPS_PAL_I,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_GEOVISION_GV600] = {
|
|
/* emhn@usb.ve */
|
|
.name = "Geovision GV-600",
|
|
.video_inputs = 16,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0x0,
|
|
.muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
|
|
.muxsel_hook = geovision_muxsel,
|
|
.gpiomux = { 0 },
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_KOZUMI_KTV_01C] = {
|
|
/* Mauro Lacy <mauro@lacy.com.ar>
|
|
* Based on MagicTV and Conceptronic CONTVFMi */
|
|
|
|
.name = "Kozumi KTV-01C",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
.gpiomask = 0x008007,
|
|
.muxsel = MUXSEL(2, 3, 1, 1),
|
|
.gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */
|
|
.gpiomute = 3, /* CONTVFMi */
|
|
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
|
|
.tuner_addr = ADDR_UNSET,
|
|
.pll = PLL_28,
|
|
.has_radio = 1,
|
|
.has_remote = 1,
|
|
},
|
|
[BTTV_BOARD_ENLTV_FM_2] = {
|
|
/* Encore TV Tuner Pro ENL TV-FM-2
|
|
Mauro Carvalho Chehab <mchehab@infradead.org */
|
|
.name = "Encore ENL TV-FM-2",
|
|
.video_inputs = 3,
|
|
/* .audio_inputs= 1, */
|
|
.svhs = 2,
|
|
/* bit 6 -> IR disabled
|
|
bit 18/17 = 00 -> mute
|
|
01 -> enable external audio input
|
|
10 -> internal audio input (mono?)
|
|
11 -> internal audio input
|
|
*/
|
|
.gpiomask = 0x060040,
|
|
.muxsel = MUXSEL(2, 3, 3),
|
|
.gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 },
|
|
.gpiomute = 0,
|
|
.tuner_type = TUNER_TCL_MF02GIP_5N,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.pll = PLL_28,
|
|
.has_radio = 1,
|
|
.has_remote = 1,
|
|
},
|
|
[BTTV_BOARD_VD012] = {
|
|
/* D.Heer@Phytec.de */
|
|
.name = "PHYTEC VD-012 (bt878)",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0x00,
|
|
.muxsel = MUXSEL(0, 2, 3, 1),
|
|
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_VD012_X1] = {
|
|
/* D.Heer@Phytec.de */
|
|
.name = "PHYTEC VD-012-X1 (bt878)",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 3,
|
|
.gpiomask = 0x00,
|
|
.muxsel = MUXSEL(2, 3, 1),
|
|
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_VD012_X2] = {
|
|
/* D.Heer@Phytec.de */
|
|
.name = "PHYTEC VD-012-X2 (bt878)",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = 3,
|
|
.gpiomask = 0x00,
|
|
.muxsel = MUXSEL(3, 2, 1),
|
|
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_GEOVISION_GV800S] = {
|
|
/* Bruno Christo <bchristo@inf.ufsm.br>
|
|
*
|
|
* GeoVision GV-800(S) has 4 Conexant Fusion 878A:
|
|
* 1 audio input per BT878A = 4 audio inputs
|
|
* 4 video inputs per BT878A = 16 video inputs
|
|
* This is the first BT878A chip of the GV-800(S). It's the
|
|
* "master" chip and it controls the video inputs through an
|
|
* analog multiplexer (a CD22M3494) via some GPIO pins. The
|
|
* slaves should use card type 0x9e (following this one).
|
|
* There is a EEPROM on the card which is currently not handled.
|
|
* The audio input is not working yet.
|
|
*/
|
|
.name = "Geovision GV-800(S) (master)",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0xf107f,
|
|
.no_gpioirq = 1,
|
|
.muxsel = MUXSEL(2, 2, 2, 2),
|
|
.pll = PLL_28,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.muxsel_hook = gv800s_muxsel,
|
|
},
|
|
[BTTV_BOARD_GEOVISION_GV800S_SL] = {
|
|
/* Bruno Christo <bchristo@inf.ufsm.br>
|
|
*
|
|
* GeoVision GV-800(S) has 4 Conexant Fusion 878A:
|
|
* 1 audio input per BT878A = 4 audio inputs
|
|
* 4 video inputs per BT878A = 16 video inputs
|
|
* The 3 other BT878A chips are "slave" chips of the GV-800(S)
|
|
* and should use this card type.
|
|
* The audio input is not working yet.
|
|
*/
|
|
.name = "Geovision GV-800(S) (slave)",
|
|
.video_inputs = 4,
|
|
/* .audio_inputs= 1, */
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0x00,
|
|
.no_gpioirq = 1,
|
|
.muxsel = MUXSEL(2, 2, 2, 2),
|
|
.pll = PLL_28,
|
|
.no_msp34xx = 1,
|
|
.no_tda7432 = 1,
|
|
.muxsel_hook = gv800s_muxsel,
|
|
},
|
|
[BTTV_BOARD_PV183] = {
|
|
.name = "ProVideo PV183", /* 0x9f */
|
|
.video_inputs = 2,
|
|
/* .audio_inputs= 0, */
|
|
.svhs = NO_SVHS,
|
|
.gpiomask = 0,
|
|
.muxsel = MUXSEL(2, 3),
|
|
.gpiomux = { 0 },
|
|
.no_msp34xx = 1,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
.tuner_addr = ADDR_UNSET,
|
|
},
|
|
[BTTV_BOARD_TVT_TD3116] = {
|
|
.name = "Tongwei Video Technology TD-3116",
|
|
.video_inputs = 16,
|
|
.gpiomask = 0xc00ff,
|
|
.muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
|
|
.muxsel_hook = td3116_muxsel,
|
|
.svhs = NO_SVHS,
|
|
.pll = PLL_28,
|
|
.tuner_type = TUNER_ABSENT,
|
|
},
|
|
[BTTV_BOARD_APOSONIC_WDVR] = {
|
|
.name = "Aposonic W-DVR",
|
|
.video_inputs = 4,
|
|
.svhs = NO_SVHS,
|
|
.muxsel = MUXSEL(2, 3, 1, 0),
|
|
.tuner_type = TUNER_ABSENT,
|
|
},
|
|
|
|
};
|
|
|
|
static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static unsigned char eeprom_data[256];
|
|
|
|
/*
|
|
* identify card
|
|
*/
|
|
void bttv_idcard(struct bttv *btv)
|
|
{
|
|
unsigned int gpiobits;
|
|
int i,type;
|
|
|
|
/* read PCI subsystem ID */
|
|
btv->cardid = btv->c.pci->subsystem_device << 16;
|
|
btv->cardid |= btv->c.pci->subsystem_vendor;
|
|
|
|
if (0 != btv->cardid && 0xffffffff != btv->cardid) {
|
|
/* look for the card */
|
|
for (type = -1, i = 0; cards[i].id != 0; i++)
|
|
if (cards[i].id == btv->cardid)
|
|
type = i;
|
|
|
|
if (type != -1) {
|
|
/* found it */
|
|
pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",
|
|
btv->c.nr, cards[type].name, cards[type].cardnr,
|
|
btv->cardid & 0xffff,
|
|
(btv->cardid >> 16) & 0xffff);
|
|
btv->c.type = cards[type].cardnr;
|
|
} else {
|
|
/* 404 */
|
|
pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",
|
|
btv->c.nr, btv->cardid & 0xffff,
|
|
(btv->cardid >> 16) & 0xffff);
|
|
pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n");
|
|
}
|
|
}
|
|
|
|
/* let the user override the autodetected type */
|
|
if (card[btv->c.nr] < bttv_num_tvcards)
|
|
btv->c.type=card[btv->c.nr];
|
|
|
|
/* print which card config we are using */
|
|
pr_info("%d: using: %s [card=%d,%s]\n",
|
|
btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type,
|
|
card[btv->c.nr] < bttv_num_tvcards
|
|
? "insmod option" : "autodetected");
|
|
|
|
/* overwrite gpio stuff ?? */
|
|
if (UNSET == audioall && UNSET == audiomux[0])
|
|
return;
|
|
|
|
if (UNSET != audiomux[0]) {
|
|
gpiobits = 0;
|
|
for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
|
|
bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
|
|
gpiobits |= audiomux[i];
|
|
}
|
|
} else {
|
|
gpiobits = audioall;
|
|
for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
|
|
bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
|
|
}
|
|
}
|
|
bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
|
|
pr_info("%d: gpio config override: mask=0x%x, mux=",
|
|
btv->c.nr, bttv_tvcards[btv->c.type].gpiomask);
|
|
for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
|
|
pr_cont("%s0x%x",
|
|
i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
|
|
}
|
|
pr_cont("\n");
|
|
}
|
|
|
|
/*
|
|
* (most) board specific initialisations goes here
|
|
*/
|
|
|
|
/* Some Modular Technology cards have an eeprom, but no subsystem ID */
|
|
static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
|
|
{
|
|
int type = -1;
|
|
|
|
if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
|
|
type = BTTV_BOARD_MODTEC_205;
|
|
else if (0 == strncmp(eeprom_data+20,"Picolo",7))
|
|
type = BTTV_BOARD_EURESYS_PICOLO;
|
|
else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
|
|
type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
|
|
|
|
if (-1 != type) {
|
|
btv->c.type = type;
|
|
pr_info("%d: detected by eeprom: %s [card=%d]\n",
|
|
btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
|
|
}
|
|
}
|
|
|
|
static void flyvideo_gpio(struct bttv *btv)
|
|
{
|
|
int gpio, has_remote, has_radio, is_capture_only;
|
|
int is_lr90, has_tda9820_tda9821;
|
|
int tuner_type = UNSET, ttype;
|
|
|
|
gpio_inout(0xffffff, 0);
|
|
udelay(8); /* without this we would see the 0x1800 mask */
|
|
gpio = gpio_read();
|
|
/* FIXME: must restore OUR_EN ??? */
|
|
|
|
/* all cards provide GPIO info, some have an additional eeprom
|
|
* LR50: GPIO coding can be found lower right CP1 .. CP9
|
|
* CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
|
|
* GPIO14-12: n.c.
|
|
* LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
|
|
|
|
* lowest 3 bytes are remote control codes (no handshake needed)
|
|
* xxxFFF: No remote control chip soldered
|
|
* xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
|
|
* Note: Some bits are Audio_Mask !
|
|
*/
|
|
ttype = (gpio & 0x0f0000) >> 16;
|
|
switch (ttype) {
|
|
case 0x0:
|
|
tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */
|
|
break;
|
|
case 0x2:
|
|
tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
|
|
break;
|
|
case 0x4:
|
|
tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
|
|
break;
|
|
case 0x6:
|
|
tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
|
|
break;
|
|
case 0xC:
|
|
tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
|
|
break;
|
|
default:
|
|
pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);
|
|
break;
|
|
}
|
|
|
|
has_remote = gpio & 0x800000;
|
|
has_radio = gpio & 0x400000;
|
|
/* unknown 0x200000;
|
|
* unknown2 0x100000; */
|
|
is_capture_only = !(gpio & 0x008000); /* GPIO15 */
|
|
has_tda9820_tda9821 = !(gpio & 0x004000);
|
|
is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
|
|
/*
|
|
* gpio & 0x001000 output bit for audio routing */
|
|
|
|
if (is_capture_only)
|
|
tuner_type = TUNER_ABSENT; /* No tuner present */
|
|
|
|
pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
|
|
btv->c.nr, has_radio ? "yes" : "no",
|
|
has_remote ? "yes" : "no", tuner_type, gpio);
|
|
pr_info("%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
|
|
btv->c.nr, is_lr90 ? "yes" : "no",
|
|
has_tda9820_tda9821 ? "yes" : "no",
|
|
is_capture_only ? "yes" : "no");
|
|
|
|
if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
|
|
btv->tuner_type = tuner_type;
|
|
btv->has_radio = has_radio;
|
|
|
|
/* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
|
|
* LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
|
|
* Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
|
|
if (has_tda9820_tda9821)
|
|
btv->audio_mode_gpio = lt9415_audio;
|
|
/* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
|
|
}
|
|
|
|
static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
|
|
14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
|
|
static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
|
|
1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
|
|
|
|
static void miro_pinnacle_gpio(struct bttv *btv)
|
|
{
|
|
int id,msp,gpio;
|
|
char *info;
|
|
|
|
gpio_inout(0xffffff, 0);
|
|
gpio = gpio_read();
|
|
id = ((gpio>>10) & 63) -1;
|
|
msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
|
|
if (id < 32) {
|
|
btv->tuner_type = miro_tunermap[id];
|
|
if (0 == (gpio & 0x20)) {
|
|
btv->has_radio = 1;
|
|
if (!miro_fmtuner[id]) {
|
|
btv->has_matchbox = 1;
|
|
btv->mbox_we = (1<<6);
|
|
btv->mbox_most = (1<<7);
|
|
btv->mbox_clk = (1<<8);
|
|
btv->mbox_data = (1<<9);
|
|
btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
|
|
}
|
|
} else {
|
|
btv->has_radio = 0;
|
|
}
|
|
if (-1 != msp) {
|
|
if (btv->c.type == BTTV_BOARD_MIRO)
|
|
btv->c.type = BTTV_BOARD_MIROPRO;
|
|
if (btv->c.type == BTTV_BOARD_PINNACLE)
|
|
btv->c.type = BTTV_BOARD_PINNACLEPRO;
|
|
}
|
|
pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
|
|
btv->c.nr, id+1, btv->tuner_type,
|
|
!btv->has_radio ? "no" :
|
|
(btv->has_matchbox ? "matchbox" : "fmtuner"),
|
|
(-1 == msp) ? "no" : "yes");
|
|
} else {
|
|
/* new cards with microtune tuner */
|
|
id = 63 - id;
|
|
btv->has_radio = 0;
|
|
switch (id) {
|
|
case 1:
|
|
info = "PAL / mono";
|
|
btv->tda9887_conf = TDA9887_INTERCARRIER;
|
|
break;
|
|
case 2:
|
|
info = "PAL+SECAM / stereo";
|
|
btv->has_radio = 1;
|
|
btv->tda9887_conf = TDA9887_QSS;
|
|
break;
|
|
case 3:
|
|
info = "NTSC / stereo";
|
|
btv->has_radio = 1;
|
|
btv->tda9887_conf = TDA9887_QSS;
|
|
break;
|
|
case 4:
|
|
info = "PAL+SECAM / mono";
|
|
btv->tda9887_conf = TDA9887_QSS;
|
|
break;
|
|
case 5:
|
|
info = "NTSC / mono";
|
|
btv->tda9887_conf = TDA9887_INTERCARRIER;
|
|
break;
|
|
case 6:
|
|
info = "NTSC / stereo";
|
|
btv->tda9887_conf = TDA9887_INTERCARRIER;
|
|
break;
|
|
case 7:
|
|
info = "PAL / stereo";
|
|
btv->tda9887_conf = TDA9887_INTERCARRIER;
|
|
break;
|
|
default:
|
|
info = "oops: unknown card";
|
|
break;
|
|
}
|
|
if (-1 != msp)
|
|
btv->c.type = BTTV_BOARD_PINNACLEPRO;
|
|
pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
|
|
btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
|
|
btv->tuner_type = TUNER_MT2032;
|
|
}
|
|
}
|
|
|
|
/* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
|
|
#define LM1882_SYNC_DRIVE 0x200000L
|
|
|
|
static void init_ids_eagle(struct bttv *btv)
|
|
{
|
|
gpio_inout(0xffffff,0xFFFF37);
|
|
gpio_write(0x200020);
|
|
|
|
/* flash strobe inverter ?! */
|
|
gpio_write(0x200024);
|
|
|
|
/* switch sync drive off */
|
|
gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
|
|
|
|
/* set BT848 muxel to 2 */
|
|
btaor((2)<<5, ~(2<<5), BT848_IFORM);
|
|
}
|
|
|
|
/* Muxsel helper for the IDS Eagle.
|
|
* the eagles does not use the standard muxsel-bits but
|
|
* has its own multiplexer */
|
|
static void eagle_muxsel(struct bttv *btv, unsigned int input)
|
|
{
|
|
gpio_bits(3, input & 3);
|
|
|
|
/* composite */
|
|
/* set chroma ADC to sleep */
|
|
btor(BT848_ADC_C_SLEEP, BT848_ADC);
|
|
/* set to composite video */
|
|
btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
|
|
btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
|
|
|
|
/* switch sync drive off */
|
|
gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
|
|
}
|
|
|
|
static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
|
|
{
|
|
static const int masks[] = {0x30, 0x01, 0x12, 0x23};
|
|
gpio_write(masks[input%4]);
|
|
}
|
|
|
|
/* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
|
|
alarms output
|
|
|
|
GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
|
|
assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
|
|
|
|
IN - sensor inputs, INx - sensor inputs and TI XORed together
|
|
O1,O2,O3 - alarm outputs (relays)
|
|
|
|
OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
|
|
|
|
*/
|
|
|
|
static void init_lmlbt4x(struct bttv *btv)
|
|
{
|
|
pr_debug("LMLBT4x init\n");
|
|
btwrite(0x000000, BT848_GPIO_REG_INP);
|
|
gpio_inout(0xffffff, 0x0006C0);
|
|
gpio_write(0x000000);
|
|
}
|
|
|
|
static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
|
|
{
|
|
unsigned int inmux = input % 8;
|
|
gpio_inout( 0xf, 0xf );
|
|
gpio_bits( 0xf, inmux );
|
|
}
|
|
|
|
static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
|
|
{
|
|
unsigned int inmux = input % 4;
|
|
gpio_inout( 3<<9, 3<<9 );
|
|
gpio_bits( 3<<9, inmux<<9 );
|
|
}
|
|
|
|
static void geovision_muxsel(struct bttv *btv, unsigned int input)
|
|
{
|
|
unsigned int inmux = input % 16;
|
|
gpio_inout(0xf, 0xf);
|
|
gpio_bits(0xf, inmux);
|
|
}
|
|
|
|
/*
|
|
* The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878.
|
|
* The first 74HC4051 has the lower 8 inputs, the second one the higher 8.
|
|
* The muxes are controlled via a 74HC373 latch which is connected to
|
|
* GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch.
|
|
* Q0 of the latch is connected to the Enable (~E) input of the first
|
|
* 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051.
|
|
* Q4 - Q7 are connected to the second 74HC4051 in the same way.
|
|
*/
|
|
|
|
static void td3116_latch_value(struct bttv *btv, u32 value)
|
|
{
|
|
gpio_bits((1<<18) | 0xff, value);
|
|
gpio_bits((1<<18) | 0xff, (1<<18) | value);
|
|
udelay(1);
|
|
gpio_bits((1<<18) | 0xff, value);
|
|
}
|
|
|
|
static void td3116_muxsel(struct bttv *btv, unsigned int input)
|
|
{
|
|
u32 value;
|
|
u32 highbit;
|
|
|
|
highbit = (input & 0x8) >> 3 ;
|
|
|
|
/* Disable outputs and set value in the mux */
|
|
value = 0x11; /* Disable outputs */
|
|
value |= ((input & 0x7) << 1) << (4 * highbit);
|
|
td3116_latch_value(btv, value);
|
|
|
|
/* Enable the correct output */
|
|
value &= ~0x11;
|
|
value |= ((highbit ^ 0x1) << 4) | highbit;
|
|
td3116_latch_value(btv, value);
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static void bttv_reset_audio(struct bttv *btv)
|
|
{
|
|
/*
|
|
* BT878A has a audio-reset register.
|
|
* 1. This register is an audio reset function but it is in
|
|
* function-0 (video capture) address space.
|
|
* 2. It is enough to do this once per power-up of the card.
|
|
* 3. There is a typo in the Conexant doc -- it is not at
|
|
* 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
|
|
* --//Shrikumar 030609
|
|
*/
|
|
if (btv->id != 878)
|
|
return;
|
|
|
|
if (bttv_debug)
|
|
pr_debug("%d: BT878A ARESET\n", btv->c.nr);
|
|
btwrite((1<<7), 0x058);
|
|
udelay(10);
|
|
btwrite( 0, 0x058);
|
|
}
|
|
|
|
/* initialization part one -- before registering i2c bus */
|
|
void bttv_init_card1(struct bttv *btv)
|
|
{
|
|
switch (btv->c.type) {
|
|
case BTTV_BOARD_HAUPPAUGE:
|
|
case BTTV_BOARD_HAUPPAUGE878:
|
|
boot_msp34xx(btv,5);
|
|
break;
|
|
case BTTV_BOARD_VOODOOTV_200:
|
|
case BTTV_BOARD_VOODOOTV_FM:
|
|
boot_msp34xx(btv,20);
|
|
break;
|
|
case BTTV_BOARD_AVERMEDIA98:
|
|
boot_msp34xx(btv,11);
|
|
break;
|
|
case BTTV_BOARD_HAUPPAUGEPVR:
|
|
pvr_boot(btv);
|
|
break;
|
|
case BTTV_BOARD_TWINHAN_DST:
|
|
case BTTV_BOARD_AVDVBT_771:
|
|
case BTTV_BOARD_PINNACLESAT:
|
|
btv->use_i2c_hw = 1;
|
|
break;
|
|
case BTTV_BOARD_ADLINK_RTV24:
|
|
init_RTV24( btv );
|
|
break;
|
|
|
|
}
|
|
if (!bttv_tvcards[btv->c.type].has_dvb)
|
|
bttv_reset_audio(btv);
|
|
}
|
|
|
|
/* initialization part two -- after registering i2c bus */
|
|
void bttv_init_card2(struct bttv *btv)
|
|
{
|
|
btv->tuner_type = UNSET;
|
|
|
|
if (BTTV_BOARD_UNKNOWN == btv->c.type) {
|
|
bttv_readee(btv,eeprom_data,0xa0);
|
|
identify_by_eeprom(btv,eeprom_data);
|
|
}
|
|
|
|
switch (btv->c.type) {
|
|
case BTTV_BOARD_MIRO:
|
|
case BTTV_BOARD_MIROPRO:
|
|
case BTTV_BOARD_PINNACLE:
|
|
case BTTV_BOARD_PINNACLEPRO:
|
|
/* miro/pinnacle */
|
|
miro_pinnacle_gpio(btv);
|
|
break;
|
|
case BTTV_BOARD_FLYVIDEO_98:
|
|
case BTTV_BOARD_MAXI:
|
|
case BTTV_BOARD_LIFE_FLYKIT:
|
|
case BTTV_BOARD_FLYVIDEO:
|
|
case BTTV_BOARD_TYPHOON_TVIEW:
|
|
case BTTV_BOARD_CHRONOS_VS2:
|
|
case BTTV_BOARD_FLYVIDEO_98FM:
|
|
case BTTV_BOARD_FLYVIDEO2000:
|
|
case BTTV_BOARD_FLYVIDEO98EZ:
|
|
case BTTV_BOARD_CONFERENCETV:
|
|
case BTTV_BOARD_LIFETEC_9415:
|
|
flyvideo_gpio(btv);
|
|
break;
|
|
case BTTV_BOARD_HAUPPAUGE:
|
|
case BTTV_BOARD_HAUPPAUGE878:
|
|
case BTTV_BOARD_HAUPPAUGEPVR:
|
|
/* pick up some config infos from the eeprom */
|
|
bttv_readee(btv,eeprom_data,0xa0);
|
|
hauppauge_eeprom(btv);
|
|
break;
|
|
case BTTV_BOARD_AVERMEDIA98:
|
|
case BTTV_BOARD_AVPHONE98:
|
|
bttv_readee(btv,eeprom_data,0xa0);
|
|
avermedia_eeprom(btv);
|
|
break;
|
|
case BTTV_BOARD_PXC200:
|
|
init_PXC200(btv);
|
|
break;
|
|
case BTTV_BOARD_PICOLO_TETRA_CHIP:
|
|
picolo_tetra_init(btv);
|
|
break;
|
|
case BTTV_BOARD_VHX:
|
|
btv->has_radio = 1;
|
|
btv->has_matchbox = 1;
|
|
btv->mbox_we = 0x20;
|
|
btv->mbox_most = 0;
|
|
btv->mbox_clk = 0x08;
|
|
btv->mbox_data = 0x10;
|
|
btv->mbox_mask = 0x38;
|
|
break;
|
|
case BTTV_BOARD_VOBIS_BOOSTAR:
|
|
case BTTV_BOARD_TERRATV:
|
|
terratec_active_radio_upgrade(btv);
|
|
break;
|
|
case BTTV_BOARD_MAGICTVIEW061:
|
|
if (btv->cardid == 0x3002144f) {
|
|
btv->has_radio=1;
|
|
pr_info("%d: radio detected by subsystem id (CPH05x)\n",
|
|
btv->c.nr);
|
|
}
|
|
break;
|
|
case BTTV_BOARD_STB2:
|
|
if (btv->cardid == 0x3060121a) {
|
|
/* Fix up entry for 3DFX VoodooTV 100,
|
|
which is an OEM STB card variant. */
|
|
btv->has_radio=0;
|
|
btv->tuner_type=TUNER_TEMIC_NTSC;
|
|
}
|
|
break;
|
|
case BTTV_BOARD_OSPREY1x0:
|
|
case BTTV_BOARD_OSPREY1x0_848:
|
|
case BTTV_BOARD_OSPREY101_848:
|
|
case BTTV_BOARD_OSPREY1x1:
|
|
case BTTV_BOARD_OSPREY1x1_SVID:
|
|
case BTTV_BOARD_OSPREY2xx:
|
|
case BTTV_BOARD_OSPREY2x0_SVID:
|
|
case BTTV_BOARD_OSPREY2x0:
|
|
case BTTV_BOARD_OSPREY440:
|
|
case BTTV_BOARD_OSPREY500:
|
|
case BTTV_BOARD_OSPREY540:
|
|
case BTTV_BOARD_OSPREY2000:
|
|
bttv_readee(btv,eeprom_data,0xa0);
|
|
osprey_eeprom(btv, eeprom_data);
|
|
break;
|
|
case BTTV_BOARD_IDS_EAGLE:
|
|
init_ids_eagle(btv);
|
|
break;
|
|
case BTTV_BOARD_MODTEC_205:
|
|
bttv_readee(btv,eeprom_data,0xa0);
|
|
modtec_eeprom(btv);
|
|
break;
|
|
case BTTV_BOARD_LMLBT4:
|
|
init_lmlbt4x(btv);
|
|
break;
|
|
case BTTV_BOARD_TIBET_CS16:
|
|
tibetCS16_init(btv);
|
|
break;
|
|
case BTTV_BOARD_KODICOM_4400R:
|
|
kodicom4400r_init(btv);
|
|
break;
|
|
case BTTV_BOARD_GEOVISION_GV800S:
|
|
gv800s_init(btv);
|
|
break;
|
|
}
|
|
|
|
/* pll configuration */
|
|
if (!(btv->id==848 && btv->revision==0x11)) {
|
|
/* defaults from card list */
|
|
if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
|
|
btv->pll.pll_ifreq=28636363;
|
|
btv->pll.pll_crystal=BT848_IFORM_XT0;
|
|
}
|
|
if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
|
|
btv->pll.pll_ifreq=35468950;
|
|
btv->pll.pll_crystal=BT848_IFORM_XT1;
|
|
}
|
|
/* insmod options can override */
|
|
switch (pll[btv->c.nr]) {
|
|
case 0: /* none */
|
|
btv->pll.pll_crystal = 0;
|
|
btv->pll.pll_ifreq = 0;
|
|
btv->pll.pll_ofreq = 0;
|
|
break;
|
|
case 1: /* 28 MHz */
|
|
case 28:
|
|
btv->pll.pll_ifreq = 28636363;
|
|
btv->pll.pll_ofreq = 0;
|
|
btv->pll.pll_crystal = BT848_IFORM_XT0;
|
|
break;
|
|
case 2: /* 35 MHz */
|
|
case 35:
|
|
btv->pll.pll_ifreq = 35468950;
|
|
btv->pll.pll_ofreq = 0;
|
|
btv->pll.pll_crystal = BT848_IFORM_XT1;
|
|
break;
|
|
}
|
|
}
|
|
btv->pll.pll_current = -1;
|
|
|
|
/* tuner configuration (from card list / autodetect / insmod option) */
|
|
if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
|
|
if (UNSET == btv->tuner_type)
|
|
btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
|
|
if (UNSET != tuner[btv->c.nr])
|
|
btv->tuner_type = tuner[btv->c.nr];
|
|
|
|
if (btv->tuner_type == TUNER_ABSENT)
|
|
pr_info("%d: tuner absent\n", btv->c.nr);
|
|
else if (btv->tuner_type == UNSET)
|
|
pr_warn("%d: tuner type unset\n", btv->c.nr);
|
|
else
|
|
pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);
|
|
|
|
if (autoload != UNSET) {
|
|
pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);
|
|
pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",
|
|
btv->c.nr);
|
|
}
|
|
|
|
if (UNSET == btv->tuner_type)
|
|
btv->tuner_type = TUNER_ABSENT;
|
|
|
|
btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
|
|
bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
|
|
btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
|
|
UNSET : bttv_tvcards[btv->c.type].svhs;
|
|
if (svhs[btv->c.nr] != UNSET)
|
|
btv->svhs = svhs[btv->c.nr];
|
|
if (remote[btv->c.nr] != UNSET)
|
|
btv->has_remote = remote[btv->c.nr];
|
|
|
|
if (bttv_tvcards[btv->c.type].has_radio)
|
|
btv->has_radio = 1;
|
|
if (bttv_tvcards[btv->c.type].has_remote)
|
|
btv->has_remote = 1;
|
|
if (!bttv_tvcards[btv->c.type].no_gpioirq)
|
|
btv->gpioirq = 1;
|
|
if (bttv_tvcards[btv->c.type].volume_gpio)
|
|
btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
|
|
if (bttv_tvcards[btv->c.type].audio_mode_gpio)
|
|
btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
|
|
|
|
if (btv->tuner_type == TUNER_ABSENT)
|
|
return; /* no tuner or related drivers to load */
|
|
|
|
if (btv->has_saa6588 || saa6588[btv->c.nr]) {
|
|
/* Probe for RDS receiver chip */
|
|
static const unsigned short addrs[] = {
|
|
0x20 >> 1,
|
|
0x22 >> 1,
|
|
I2C_CLIENT_END
|
|
};
|
|
struct v4l2_subdev *sd;
|
|
|
|
sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
|
|
&btv->c.i2c_adap, "saa6588", 0, addrs);
|
|
btv->has_saa6588 = (sd != NULL);
|
|
}
|
|
|
|
/* try to detect audio/fader chips */
|
|
|
|
/* First check if the user specified the audio chip via a module
|
|
option. */
|
|
|
|
switch (audiodev[btv->c.nr]) {
|
|
case -1:
|
|
return; /* do not load any audio module */
|
|
|
|
case 0: /* autodetect */
|
|
break;
|
|
|
|
case 1: {
|
|
/* The user specified that we should probe for msp3400 */
|
|
static const unsigned short addrs[] = {
|
|
I2C_ADDR_MSP3400 >> 1,
|
|
I2C_ADDR_MSP3400_ALT >> 1,
|
|
I2C_CLIENT_END
|
|
};
|
|
|
|
btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
|
|
&btv->c.i2c_adap, "msp3400", 0, addrs);
|
|
if (btv->sd_msp34xx)
|
|
return;
|
|
goto no_audio;
|
|
}
|
|
|
|
case 2: {
|
|
/* The user specified that we should probe for tda7432 */
|
|
static const unsigned short addrs[] = {
|
|
I2C_ADDR_TDA7432 >> 1,
|
|
I2C_CLIENT_END
|
|
};
|
|
|
|
if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
|
|
&btv->c.i2c_adap, "tda7432", 0, addrs))
|
|
return;
|
|
goto no_audio;
|
|
}
|
|
|
|
case 3: {
|
|
/* The user specified that we should probe for tvaudio */
|
|
btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
|
|
&btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
|
|
if (btv->sd_tvaudio)
|
|
return;
|
|
goto no_audio;
|
|
}
|
|
|
|
default:
|
|
pr_warn("%d: unknown audiodev value!\n", btv->c.nr);
|
|
return;
|
|
}
|
|
|
|
/* There were no overrides, so now we try to discover this through the
|
|
card definition */
|
|
|
|
/* probe for msp3400 first: this driver can detect whether or not
|
|
it really is a msp3400, so it will return NULL when the device
|
|
found is really something else (e.g. a tea6300). */
|
|
if (!bttv_tvcards[btv->c.type].no_msp34xx) {
|
|
btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
|
|
&btv->c.i2c_adap, "msp3400",
|
|
0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
|
|
} else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
|
|
btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
|
|
&btv->c.i2c_adap, "msp3400",
|
|
0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
|
|
}
|
|
|
|
/* If we found a msp34xx, then we're done. */
|
|
if (btv->sd_msp34xx)
|
|
return;
|
|
|
|
/* Now see if we can find one of the tvaudio devices. */
|
|
btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
|
|
&btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
|
|
if (btv->sd_tvaudio) {
|
|
/* There may be two tvaudio chips on the card, so try to
|
|
find another. */
|
|
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
|
|
&btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
|
|
}
|
|
|
|
/* it might also be a tda7432. */
|
|
if (!bttv_tvcards[btv->c.type].no_tda7432) {
|
|
static const unsigned short addrs[] = {
|
|
I2C_ADDR_TDA7432 >> 1,
|
|
I2C_CLIENT_END
|
|
};
|
|
|
|
btv->sd_tda7432 = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
|
|
&btv->c.i2c_adap, "tda7432", 0, addrs);
|
|
if (btv->sd_tda7432)
|
|
return;
|
|
}
|
|
if (btv->sd_tvaudio)
|
|
return;
|
|
|
|
no_audio:
|
|
pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);
|
|
}
|
|
|
|
|
|
/* initialize the tuner */
|
|
void bttv_init_tuner(struct bttv *btv)
|
|
{
|
|
int addr = ADDR_UNSET;
|
|
|
|
if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
|
|
addr = bttv_tvcards[btv->c.type].tuner_addr;
|
|
|
|
if (btv->tuner_type != TUNER_ABSENT) {
|
|
struct tuner_setup tun_setup;
|
|
|
|
/* Load tuner module before issuing tuner config call! */
|
|
if (btv->has_radio)
|
|
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
|
|
&btv->c.i2c_adap, "tuner",
|
|
0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
|
|
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
|
|
&btv->c.i2c_adap, "tuner",
|
|
0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
|
|
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
|
|
&btv->c.i2c_adap, "tuner",
|
|
0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
|
|
|
|
tun_setup.mode_mask = T_ANALOG_TV;
|
|
tun_setup.type = btv->tuner_type;
|
|
tun_setup.addr = addr;
|
|
|
|
if (btv->has_radio)
|
|
tun_setup.mode_mask |= T_RADIO;
|
|
|
|
bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
|
|
}
|
|
|
|
if (btv->tda9887_conf) {
|
|
struct v4l2_priv_tun_config tda9887_cfg;
|
|
|
|
tda9887_cfg.tuner = TUNER_TDA9887;
|
|
tda9887_cfg.priv = &btv->tda9887_conf;
|
|
|
|
bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
|
|
}
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static void modtec_eeprom(struct bttv *btv)
|
|
{
|
|
if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
|
|
btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
|
|
pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
|
|
btv->c.nr, &eeprom_data[0x1e]);
|
|
} else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
|
|
btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
|
|
pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
|
|
btv->c.nr, &eeprom_data[0x1e]);
|
|
} else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
|
|
btv->tuner_type=TUNER_PHILIPS_NTSC;
|
|
pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
|
|
btv->c.nr, &eeprom_data[0x1e]);
|
|
} else {
|
|
pr_info("%d: Modtec: Unknown TunerString: %s\n",
|
|
btv->c.nr, &eeprom_data[0x1e]);
|
|
}
|
|
}
|
|
|
|
static void hauppauge_eeprom(struct bttv *btv)
|
|
{
|
|
struct tveeprom tv;
|
|
|
|
tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
|
|
btv->tuner_type = tv.tuner_type;
|
|
btv->has_radio = tv.has_radio;
|
|
|
|
pr_info("%d: Hauppauge eeprom indicates model#%d\n",
|
|
btv->c.nr, tv.model);
|
|
|
|
/*
|
|
* Some of the 878 boards have duplicate PCI IDs. Switch the board
|
|
* type based on model #.
|
|
*/
|
|
if(tv.model == 64900) {
|
|
pr_info("%d: Switching board type from %s to %s\n",
|
|
btv->c.nr,
|
|
bttv_tvcards[btv->c.type].name,
|
|
bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
|
|
btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
|
|
}
|
|
|
|
/* The 61334 needs the msp3410 to do the radio demod to get sound */
|
|
if (tv.model == 61334)
|
|
btv->radio_uses_msp_demodulator = 1;
|
|
}
|
|
|
|
static int terratec_active_radio_upgrade(struct bttv *btv)
|
|
{
|
|
int freq;
|
|
|
|
btv->has_radio = 1;
|
|
btv->has_matchbox = 1;
|
|
btv->mbox_we = 0x10;
|
|
btv->mbox_most = 0x20;
|
|
btv->mbox_clk = 0x08;
|
|
btv->mbox_data = 0x04;
|
|
btv->mbox_mask = 0x3c;
|
|
|
|
btv->mbox_iow = 1 << 8;
|
|
btv->mbox_ior = 1 << 9;
|
|
btv->mbox_csel = 1 << 10;
|
|
|
|
freq=88000/62.5;
|
|
tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
|
|
if (0x1ed8 == tea5757_read(btv)) {
|
|
pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);
|
|
btv->has_radio = 1;
|
|
btv->has_saa6588 = 1;
|
|
btv->has_matchbox = 1;
|
|
} else {
|
|
btv->has_radio = 0;
|
|
btv->has_matchbox = 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* minimal bootstrap for the WinTV/PVR -- upload altera firmware.
|
|
*
|
|
* The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
|
|
* a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
|
|
* unpacked with unzip).
|
|
*/
|
|
#define PVR_GPIO_DELAY 10
|
|
|
|
#define BTTV_ALT_DATA 0x000001
|
|
#define BTTV_ALT_DCLK 0x100000
|
|
#define BTTV_ALT_NCONFIG 0x800000
|
|
|
|
static int pvr_altera_load(struct bttv *btv, const u8 *micro, u32 microlen)
|
|
{
|
|
u32 n;
|
|
u8 bits;
|
|
int i;
|
|
|
|
gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
|
|
gpio_write(0);
|
|
udelay(PVR_GPIO_DELAY);
|
|
|
|
gpio_write(BTTV_ALT_NCONFIG);
|
|
udelay(PVR_GPIO_DELAY);
|
|
|
|
for (n = 0; n < microlen; n++) {
|
|
bits = micro[n];
|
|
for (i = 0 ; i < 8 ; i++) {
|
|
gpio_bits(BTTV_ALT_DCLK,0);
|
|
if (bits & 0x01)
|
|
gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
|
|
else
|
|
gpio_bits(BTTV_ALT_DATA,0);
|
|
gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
|
|
bits >>= 1;
|
|
}
|
|
}
|
|
gpio_bits(BTTV_ALT_DCLK,0);
|
|
udelay(PVR_GPIO_DELAY);
|
|
|
|
/* begin Altera init loop (Not necessary,but doesn't hurt) */
|
|
for (i = 0 ; i < 30 ; i++) {
|
|
gpio_bits(BTTV_ALT_DCLK,0);
|
|
gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
|
|
}
|
|
gpio_bits(BTTV_ALT_DCLK,0);
|
|
return 0;
|
|
}
|
|
|
|
static int pvr_boot(struct bttv *btv)
|
|
{
|
|
const struct firmware *fw_entry;
|
|
int rc;
|
|
|
|
rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
|
|
if (rc != 0) {
|
|
pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);
|
|
return rc;
|
|
}
|
|
rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
|
|
pr_info("%d: altera firmware upload %s\n",
|
|
btv->c.nr, (rc < 0) ? "failed" : "ok");
|
|
release_firmware(fw_entry);
|
|
return rc;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
/* some osprey specific stuff */
|
|
|
|
static void osprey_eeprom(struct bttv *btv, const u8 ee[256])
|
|
{
|
|
int i;
|
|
u32 serial = 0;
|
|
int cardid = -1;
|
|
|
|
/* This code will nevery actually get called in this case.... */
|
|
if (btv->c.type == BTTV_BOARD_UNKNOWN) {
|
|
/* this might be an antique... check for MMAC label in eeprom */
|
|
if (!strncmp(ee, "MMAC", 4)) {
|
|
u8 checksum = 0;
|
|
for (i = 0; i < 21; i++)
|
|
checksum += ee[i];
|
|
if (checksum != ee[21])
|
|
return;
|
|
cardid = BTTV_BOARD_OSPREY1x0_848;
|
|
for (i = 12; i < 21; i++)
|
|
serial *= 10, serial += ee[i] - '0';
|
|
}
|
|
} else {
|
|
unsigned short type;
|
|
|
|
for (i = 4*16; i < 8*16; i += 16) {
|
|
u16 checksum = ip_compute_csum(ee + i, 16);
|
|
|
|
if ((checksum&0xff) + (checksum>>8) == 0xff)
|
|
break;
|
|
}
|
|
if (i >= 8*16)
|
|
return;
|
|
ee += i;
|
|
|
|
/* found a valid descriptor */
|
|
type = get_unaligned_be16((__be16 *)(ee+4));
|
|
|
|
switch(type) {
|
|
/* 848 based */
|
|
case 0x0004:
|
|
cardid = BTTV_BOARD_OSPREY1x0_848;
|
|
break;
|
|
case 0x0005:
|
|
cardid = BTTV_BOARD_OSPREY101_848;
|
|
break;
|
|
|
|
/* 878 based */
|
|
case 0x0012:
|
|
case 0x0013:
|
|
cardid = BTTV_BOARD_OSPREY1x0;
|
|
break;
|
|
case 0x0014:
|
|
case 0x0015:
|
|
cardid = BTTV_BOARD_OSPREY1x1;
|
|
break;
|
|
case 0x0016:
|
|
case 0x0017:
|
|
case 0x0020:
|
|
cardid = BTTV_BOARD_OSPREY1x1_SVID;
|
|
break;
|
|
case 0x0018:
|
|
case 0x0019:
|
|
case 0x001E:
|
|
case 0x001F:
|
|
cardid = BTTV_BOARD_OSPREY2xx;
|
|
break;
|
|
case 0x001A:
|
|
case 0x001B:
|
|
cardid = BTTV_BOARD_OSPREY2x0_SVID;
|
|
break;
|
|
case 0x0040:
|
|
cardid = BTTV_BOARD_OSPREY500;
|
|
break;
|
|
case 0x0050:
|
|
case 0x0056:
|
|
cardid = BTTV_BOARD_OSPREY540;
|
|
/* bttv_osprey_540_init(btv); */
|
|
break;
|
|
case 0x0060:
|
|
case 0x0070:
|
|
case 0x00A0:
|
|
cardid = BTTV_BOARD_OSPREY2x0;
|
|
/* enable output on select control lines */
|
|
gpio_inout(0xffffff,0x000303);
|
|
break;
|
|
case 0x00D8:
|
|
cardid = BTTV_BOARD_OSPREY440;
|
|
break;
|
|
default:
|
|
/* unknown...leave generic, but get serial # */
|
|
pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",
|
|
btv->c.nr, type);
|
|
break;
|
|
}
|
|
serial = get_unaligned_be32((__be32 *)(ee+6));
|
|
}
|
|
|
|
pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",
|
|
btv->c.nr, cardid,
|
|
cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial);
|
|
|
|
if (cardid<0 || btv->c.type == cardid)
|
|
return;
|
|
|
|
/* card type isn't set correctly */
|
|
if (card[btv->c.nr] < bttv_num_tvcards) {
|
|
pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",
|
|
btv->c.nr);
|
|
} else {
|
|
pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",
|
|
btv->c.nr, btv->c.type, cardid);
|
|
btv->c.type = cardid;
|
|
}
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
/* AVermedia specific stuff, from bktr_card.c */
|
|
|
|
static int tuner_0_table[] = {
|
|
TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
|
|
TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
|
|
TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
|
|
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
|
|
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
|
|
TUNER_PHILIPS_FM1216ME_MK3 };
|
|
|
|
static int tuner_1_table[] = {
|
|
TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
|
|
TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
|
|
TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
|
|
TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
|
|
TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
|
|
|
|
static void avermedia_eeprom(struct bttv *btv)
|
|
{
|
|
int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
|
|
|
|
tuner_make = (eeprom_data[0x41] & 0x7);
|
|
tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
|
|
tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
|
|
btv->has_remote = (eeprom_data[0x42] & 0x01);
|
|
|
|
if (tuner_make == 0 || tuner_make == 2)
|
|
if (tuner_format <= 0x0a)
|
|
tuner_type = tuner_0_table[tuner_format];
|
|
if (tuner_make == 1)
|
|
if (tuner_format <= 9)
|
|
tuner_type = tuner_1_table[tuner_format];
|
|
|
|
if (tuner_make == 4)
|
|
if (tuner_format == 0x09)
|
|
tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
|
|
|
|
pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",
|
|
btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
|
|
if (tuner_type) {
|
|
btv->tuner_type = tuner_type;
|
|
pr_cont("%d", tuner_type);
|
|
} else
|
|
pr_cont("Unknown type");
|
|
pr_cont(" radio:%s remote control:%s\n",
|
|
tuner_tv_fm ? "yes" : "no",
|
|
btv->has_remote ? "yes" : "no");
|
|
}
|
|
|
|
/*
|
|
* For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880
|
|
* analog demod, which is not I2C controlled like the newer and more common
|
|
* TDA9887 series. Instead is has two tri-state input pins, S0 and S1,
|
|
* that control the IF for the video and audio. Apparently, bttv GPIO
|
|
* 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I
|
|
* (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
|
|
*/
|
|
u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
|
|
{
|
|
|
|
if (btv->audio_input == TVAUDIO_INPUT_TUNER) {
|
|
if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
|
|
gpiobits |= 0x10000;
|
|
else
|
|
gpiobits &= ~0x10000;
|
|
}
|
|
|
|
gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
|
|
return gpiobits;
|
|
}
|
|
|
|
|
|
/*
|
|
* reset/enable the MSP on some Hauppauge cards
|
|
* Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
|
|
*
|
|
* Hauppauge: pin 5
|
|
* Voodoo: pin 20
|
|
*/
|
|
static void boot_msp34xx(struct bttv *btv, int pin)
|
|
{
|
|
int mask = (1 << pin);
|
|
|
|
gpio_inout(mask,mask);
|
|
gpio_bits(mask,0);
|
|
mdelay(2);
|
|
udelay(500);
|
|
gpio_bits(mask,mask);
|
|
|
|
if (bttv_gpio)
|
|
bttv_gpio_tracking(btv,"msp34xx");
|
|
if (bttv_verbose)
|
|
pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n",
|
|
btv->c.nr, pin);
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
/* Imagenation L-Model PXC200 Framegrabber */
|
|
/* This is basically the same procedure as
|
|
* used by Alessandro Rubini in his pxc200
|
|
* driver, but using BTTV functions */
|
|
|
|
static void init_PXC200(struct bttv *btv)
|
|
{
|
|
static int vals[] = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02,
|
|
0x03, 0x04, 0x05, 0x06, 0x00 };
|
|
unsigned int i;
|
|
int tmp;
|
|
u32 val;
|
|
|
|
/* Initialise GPIO-connevted stuff */
|
|
gpio_inout(0xffffff, (1<<13));
|
|
gpio_write(0);
|
|
udelay(3);
|
|
gpio_write(1<<13);
|
|
/* GPIO inputs are pulled up, so no need to drive
|
|
* reset pin any longer */
|
|
gpio_bits(0xffffff, 0);
|
|
if (bttv_gpio)
|
|
bttv_gpio_tracking(btv,"pxc200");
|
|
|
|
/* we could/should try and reset/control the AD pots? but
|
|
right now we simply turned off the crushing. Without
|
|
this the AGC drifts drifts
|
|
remember the EN is reverse logic -->
|
|
setting BT848_ADC_AGC_EN disable the AGC
|
|
tboult@eecs.lehigh.edu
|
|
*/
|
|
|
|
btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
|
|
|
|
/* Initialise MAX517 DAC */
|
|
pr_info("Setting DAC reference voltage level ...\n");
|
|
bttv_I2CWrite(btv,0x5E,0,0x80,1);
|
|
|
|
/* Initialise 12C508 PIC */
|
|
/* The I2CWrite and I2CRead commmands are actually to the
|
|
* same chips - but the R/W bit is included in the address
|
|
* argument so the numbers are different */
|
|
|
|
|
|
pr_info("Initialising 12C508 PIC chip ...\n");
|
|
|
|
/* First of all, enable the clock line. This is used in the PXC200-F */
|
|
val = btread(BT848_GPIO_DMA_CTL);
|
|
val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
|
|
btwrite(val, BT848_GPIO_DMA_CTL);
|
|
|
|
/* Then, push to 0 the reset pin long enough to reset the *
|
|
* device same as above for the reset line, but not the same
|
|
* value sent to the GPIO-connected stuff
|
|
* which one is the good one? */
|
|
gpio_inout(0xffffff,(1<<2));
|
|
gpio_write(0);
|
|
udelay(10);
|
|
gpio_write(1<<2);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(vals); i++) {
|
|
tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
|
|
if (tmp != -1) {
|
|
pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
|
|
vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
|
|
}
|
|
}
|
|
|
|
pr_info("PXC200 Initialised\n");
|
|
}
|
|
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
/*
|
|
* The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
|
|
* it. This apparently involves the following procedure for each 878 chip:
|
|
*
|
|
* 1) write 0x00C3FEFF to the GPIO_OUT_EN register
|
|
*
|
|
* 2) write to GPIO_DATA
|
|
* - 0x0E
|
|
* - sleep 1ms
|
|
* - 0x10 + 0x0E
|
|
* - sleep 10ms
|
|
* - 0x0E
|
|
* read from GPIO_DATA into buf (uint_32)
|
|
* - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
|
|
* error. ERROR_CPLD_Check_Failed stop.
|
|
*
|
|
* 3) write to GPIO_DATA
|
|
* - write 0x4400 + 0x0E
|
|
* - sleep 10ms
|
|
* - write 0x4410 + 0x0E
|
|
* - sleep 1ms
|
|
* - write 0x0E
|
|
* read from GPIO_DATA into buf (uint_32)
|
|
* - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
|
|
* error. ERROR_CPLD_Check_Failed.
|
|
*/
|
|
/* ----------------------------------------------------------------------- */
|
|
static void
|
|
init_RTV24 (struct bttv *btv)
|
|
{
|
|
uint32_t dataRead = 0;
|
|
long watchdog_value = 0x0E;
|
|
|
|
pr_info("%d: Adlink RTV-24 initialisation in progress ...\n",
|
|
btv->c.nr);
|
|
|
|
btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
|
|
|
|
btwrite (0 + watchdog_value, BT848_GPIO_DATA);
|
|
msleep (1);
|
|
btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
|
|
msleep (10);
|
|
btwrite (0 + watchdog_value, BT848_GPIO_DATA);
|
|
|
|
dataRead = btread (BT848_GPIO_DATA);
|
|
|
|
if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
|
|
pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
|
|
btv->c.nr, dataRead);
|
|
}
|
|
|
|
btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
|
|
msleep (10);
|
|
btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
|
|
msleep (1);
|
|
btwrite (watchdog_value, BT848_GPIO_DATA);
|
|
msleep (1);
|
|
dataRead = btread (BT848_GPIO_DATA);
|
|
|
|
if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
|
|
pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
|
|
btv->c.nr, dataRead);
|
|
|
|
return;
|
|
}
|
|
|
|
pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr);
|
|
}
|
|
|
|
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
|
|
/*
|
|
* Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
|
|
* This code is placed under the terms of the GNU General Public License
|
|
*
|
|
* Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
|
|
*/
|
|
|
|
static void bus_low(struct bttv *btv, int bit)
|
|
{
|
|
if (btv->mbox_ior) {
|
|
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
|
|
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
|
|
udelay(5);
|
|
}
|
|
|
|
gpio_bits(bit,0);
|
|
udelay(5);
|
|
|
|
if (btv->mbox_ior) {
|
|
gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
|
|
udelay(5);
|
|
}
|
|
}
|
|
|
|
static void bus_high(struct bttv *btv, int bit)
|
|
{
|
|
if (btv->mbox_ior) {
|
|
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
|
|
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
|
|
udelay(5);
|
|
}
|
|
|
|
gpio_bits(bit,bit);
|
|
udelay(5);
|
|
|
|
if (btv->mbox_ior) {
|
|
gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
|
|
udelay(5);
|
|
}
|
|
}
|
|
|
|
static int bus_in(struct bttv *btv, int bit)
|
|
{
|
|
if (btv->mbox_ior) {
|
|
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
|
|
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
|
|
udelay(5);
|
|
|
|
gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
|
|
udelay(5);
|
|
}
|
|
return gpio_read() & (bit);
|
|
}
|
|
|
|
/* TEA5757 register bits */
|
|
#define TEA_FREQ 0:14
|
|
#define TEA_BUFFER 15:15
|
|
|
|
#define TEA_SIGNAL_STRENGTH 16:17
|
|
|
|
#define TEA_PORT1 18:18
|
|
#define TEA_PORT0 19:19
|
|
|
|
#define TEA_BAND 20:21
|
|
#define TEA_BAND_FM 0
|
|
#define TEA_BAND_MW 1
|
|
#define TEA_BAND_LW 2
|
|
#define TEA_BAND_SW 3
|
|
|
|
#define TEA_MONO 22:22
|
|
#define TEA_ALLOW_STEREO 0
|
|
#define TEA_FORCE_MONO 1
|
|
|
|
#define TEA_SEARCH_DIRECTION 23:23
|
|
#define TEA_SEARCH_DOWN 0
|
|
#define TEA_SEARCH_UP 1
|
|
|
|
#define TEA_STATUS 24:24
|
|
#define TEA_STATUS_TUNED 0
|
|
#define TEA_STATUS_SEARCHING 1
|
|
|
|
/* Low-level stuff */
|
|
static int tea5757_read(struct bttv *btv)
|
|
{
|
|
unsigned long timeout;
|
|
int value = 0;
|
|
int i;
|
|
|
|
/* better safe than sorry */
|
|
gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
|
|
|
|
if (btv->mbox_ior) {
|
|
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
|
|
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
|
|
udelay(5);
|
|
}
|
|
|
|
if (bttv_gpio)
|
|
bttv_gpio_tracking(btv,"tea5757 read");
|
|
|
|
bus_low(btv,btv->mbox_we);
|
|
bus_low(btv,btv->mbox_clk);
|
|
|
|
udelay(10);
|
|
timeout= jiffies + msecs_to_jiffies(1000);
|
|
|
|
/* wait for DATA line to go low; error if it doesn't */
|
|
while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
|
|
schedule();
|
|
if (bus_in(btv,btv->mbox_data)) {
|
|
pr_warn("%d: tea5757: read timeout\n", btv->c.nr);
|
|
return -1;
|
|
}
|
|
|
|
dprintk("%d: tea5757:", btv->c.nr);
|
|
for (i = 0; i < 24; i++) {
|
|
udelay(5);
|
|
bus_high(btv,btv->mbox_clk);
|
|
udelay(5);
|
|
dprintk_cont("%c",
|
|
bus_in(btv, btv->mbox_most) == 0 ? 'T' : '-');
|
|
bus_low(btv,btv->mbox_clk);
|
|
value <<= 1;
|
|
value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
|
|
dprintk_cont("%c",
|
|
bus_in(btv, btv->mbox_most) == 0 ? 'S' : 'M');
|
|
}
|
|
dprintk_cont("\n");
|
|
dprintk("%d: tea5757: read 0x%X\n", btv->c.nr, value);
|
|
return value;
|
|
}
|
|
|
|
static int tea5757_write(struct bttv *btv, int value)
|
|
{
|
|
int i;
|
|
int reg = value;
|
|
|
|
gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
|
|
|
|
if (btv->mbox_ior) {
|
|
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
|
|
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
|
|
udelay(5);
|
|
}
|
|
if (bttv_gpio)
|
|
bttv_gpio_tracking(btv,"tea5757 write");
|
|
|
|
dprintk("%d: tea5757: write 0x%X\n", btv->c.nr, value);
|
|
bus_low(btv,btv->mbox_clk);
|
|
bus_high(btv,btv->mbox_we);
|
|
for (i = 0; i < 25; i++) {
|
|
if (reg & 0x1000000)
|
|
bus_high(btv,btv->mbox_data);
|
|
else
|
|
bus_low(btv,btv->mbox_data);
|
|
reg <<= 1;
|
|
bus_high(btv,btv->mbox_clk);
|
|
udelay(10);
|
|
bus_low(btv,btv->mbox_clk);
|
|
udelay(10);
|
|
}
|
|
bus_low(btv,btv->mbox_we); /* unmute !!! */
|
|
return 0;
|
|
}
|
|
|
|
void tea5757_set_freq(struct bttv *btv, unsigned short freq)
|
|
{
|
|
dprintk("tea5757_set_freq %d\n",freq);
|
|
tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
|
|
}
|
|
|
|
/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
|
|
*
|
|
* This is needed because rv605 don't use a normal multiplex, but a crosspoint
|
|
* switch instead (CD22M3494E). This IC can have multiple active connections
|
|
* between Xn (input) and Yn (output) pins. We need to clear any existing
|
|
* connection prior to establish a new one, pulsing the STROBE pin.
|
|
*
|
|
* The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
|
|
* GPIO pins are wired as:
|
|
* GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
|
|
* GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
|
|
* GPIO[7] - DATA (xpoint) - P1[7] (microcontroller)
|
|
* GPIO[8] - - P3[5] (microcontroller)
|
|
* GPIO[9] - RESET (xpoint) - P3[6] (microcontroller)
|
|
* GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller)
|
|
* GPINTR - - P3[4] (microcontroller)
|
|
*
|
|
* The microcontroller is a 80C32 like. It should be possible to change xpoint
|
|
* configuration either directly (as we are doing) or using the microcontroller
|
|
* which is also wired to I2C interface. I have no further info on the
|
|
* microcontroller features, one would need to disassembly the firmware.
|
|
* note: the vendor refused to give any information on this product, all
|
|
* that stuff was found using a multimeter! :)
|
|
*/
|
|
static void rv605_muxsel(struct bttv *btv, unsigned int input)
|
|
{
|
|
static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
|
|
0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
|
|
|
|
gpio_bits(0x07f, muxgpio[input]);
|
|
|
|
/* reset all conections */
|
|
gpio_bits(0x200,0x200);
|
|
mdelay(1);
|
|
gpio_bits(0x200,0x000);
|
|
mdelay(1);
|
|
|
|
/* create a new connection */
|
|
gpio_bits(0x480,0x480);
|
|
mdelay(1);
|
|
gpio_bits(0x480,0x080);
|
|
mdelay(1);
|
|
}
|
|
|
|
/* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
|
|
*
|
|
* The CS16 (available on eBay cheap) is a PCI board with four Fusion
|
|
* 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
|
|
* chips, ten eight input analog multiplexors, a not chip and a few
|
|
* other components.
|
|
*
|
|
* 16 inputs on a secondary bracket are provided and can be selected
|
|
* from each of the four capture chips. Two of the eight input
|
|
* multiplexors are used to select from any of the 16 input signals.
|
|
*
|
|
* Unsupported hardware capabilities:
|
|
* . A video output monitor on the secondary bracket can be selected from
|
|
* one of the 878A chips.
|
|
* . Another passthrough but I haven't spent any time investigating it.
|
|
* . Digital I/O (logic level connected to GPIO) is available from an
|
|
* onboard header.
|
|
*
|
|
* The on chip input mux should always be set to 2.
|
|
* GPIO[16:19] - Video input selection
|
|
* GPIO[0:3] - Video output monitor select (only available from one 878A)
|
|
* GPIO[?:?] - Digital I/O.
|
|
*
|
|
* There is an ATMEL microcontroller with an 8031 core on board. I have not
|
|
* determined what function (if any) it provides. With the microcontroller
|
|
* and sync separator chips a guess is that it might have to do with video
|
|
* switching and maybe some digital I/O.
|
|
*/
|
|
static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
|
|
{
|
|
/* video mux */
|
|
gpio_bits(0x0f0000, input << 16);
|
|
}
|
|
|
|
static void tibetCS16_init(struct bttv *btv)
|
|
{
|
|
/* enable gpio bits, mask obtained via btSpy */
|
|
gpio_inout(0xffffff, 0x0f7fff);
|
|
gpio_write(0x0f7fff);
|
|
}
|
|
|
|
/*
|
|
* The following routines for the Kodicom-4400r get a little mind-twisting.
|
|
* There is a "master" controller and three "slave" controllers, together
|
|
* an analog switch which connects any of 16 cameras to any of the BT87A's.
|
|
* The analog switch is controlled by the "master", but the detection order
|
|
* of the four BT878A chips is in an order which I just don't understand.
|
|
* The "master" is actually the second controller to be detected. The
|
|
* logic on the board uses logical numbers for the 4 controllers, but
|
|
* those numbers are different from the detection sequence. When working
|
|
* with the analog switch, we need to "map" from the detection sequence
|
|
* over to the board's logical controller number. This mapping sequence
|
|
* is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
|
|
* unit 3, the second (which is the master) is logical unit 0, etc.
|
|
* We need to maintain the status of the analog switch (which of the 16
|
|
* cameras is connected to which of the 4 controllers). Rather than
|
|
* add to the bttv structure for this, we use the data reserved for
|
|
* the mbox (unused for this card type).
|
|
*/
|
|
|
|
/*
|
|
* First a routine to set the analog switch, which controls which camera
|
|
* is routed to which controller. The switch comprises an X-address
|
|
* (gpio bits 0-3, representing the camera, ranging from 0-15), and a
|
|
* Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
|
|
* A data value (gpio bit 7) of '1' enables the switch, and '0' disables
|
|
* the switch. A STROBE bit (gpio bit 8) latches the data value into the
|
|
* specified address. The idea is to set the address and data, then bring
|
|
* STROBE high, and finally bring STROBE back to low.
|
|
*/
|
|
static void kodicom4400r_write(struct bttv *btv,
|
|
unsigned char xaddr,
|
|
unsigned char yaddr,
|
|
unsigned char data) {
|
|
unsigned int udata;
|
|
|
|
udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
|
|
gpio_bits(0x1ff, udata); /* write ADDR and DAT */
|
|
gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
|
|
gpio_bits(0x1ff, udata); /* strobe low */
|
|
}
|
|
|
|
/*
|
|
* Next the mux select. Both the "master" and "slave" 'cards' (controllers)
|
|
* use this routine. The routine finds the "master" for the card, maps
|
|
* the controller number from the detected position over to the logical
|
|
* number, writes the appropriate data to the analog switch, and housekeeps
|
|
* the local copy of the switch information. The parameter 'input' is the
|
|
* requested camera number (0 - 15).
|
|
*/
|
|
static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
|
|
{
|
|
char *sw_status;
|
|
int xaddr, yaddr;
|
|
struct bttv *mctlr;
|
|
static unsigned char map[4] = {3, 0, 2, 1};
|
|
|
|
mctlr = master[btv->c.nr];
|
|
if (mctlr == NULL) { /* ignore if master not yet detected */
|
|
return;
|
|
}
|
|
yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
|
|
yaddr = map[yaddr];
|
|
sw_status = (char *)(&mctlr->mbox_we);
|
|
xaddr = input & 0xf;
|
|
/* Check if the controller/camera pair has changed, else ignore */
|
|
if (sw_status[yaddr] != xaddr)
|
|
{
|
|
/* "open" the old switch, "close" the new one, save the new */
|
|
kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
|
|
sw_status[yaddr] = xaddr;
|
|
kodicom4400r_write(mctlr, xaddr, yaddr, 1);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* During initialisation, we need to reset the analog switch. We
|
|
* also preset the switch to map the 4 connectors on the card to the
|
|
* *user's* (see above description of kodicom4400r_muxsel) channels
|
|
* 0 through 3
|
|
*/
|
|
static void kodicom4400r_init(struct bttv *btv)
|
|
{
|
|
char *sw_status = (char *)(&btv->mbox_we);
|
|
int ix;
|
|
|
|
gpio_inout(0x0003ff, 0x0003ff);
|
|
gpio_write(1 << 9); /* reset MUX */
|
|
gpio_write(0);
|
|
/* Preset camera 0 to the 4 controllers */
|
|
for (ix = 0; ix < 4; ix++) {
|
|
sw_status[ix] = ix;
|
|
kodicom4400r_write(btv, ix, ix, 1);
|
|
}
|
|
/*
|
|
* Since this is the "master", we need to set up the
|
|
* other three controller chips' pointers to this structure
|
|
* for later use in the muxsel routine.
|
|
*/
|
|
if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
|
|
return;
|
|
master[btv->c.nr-1] = btv;
|
|
master[btv->c.nr] = btv;
|
|
master[btv->c.nr+1] = btv;
|
|
master[btv->c.nr+2] = btv;
|
|
}
|
|
|
|
/* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
|
|
* video multiplexers to provide up to 16 video inputs. These
|
|
* multiplexers are controlled by the lower 8 GPIO pins of the
|
|
* bt878. The multiplexers probably Pericom PI5V331Q or similar.
|
|
|
|
* xxx0 is pin xxx of multiplexer U5,
|
|
* yyy1 is pin yyy of multiplexer U2
|
|
*/
|
|
#define ENA0 0x01
|
|
#define ENB0 0x02
|
|
#define ENA1 0x04
|
|
#define ENB1 0x08
|
|
|
|
#define IN10 0x10
|
|
#define IN00 0x20
|
|
#define IN11 0x40
|
|
#define IN01 0x80
|
|
|
|
static void xguard_muxsel(struct bttv *btv, unsigned int input)
|
|
{
|
|
static const int masks[] = {
|
|
ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
|
|
ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
|
|
ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
|
|
ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
|
|
};
|
|
gpio_write(masks[input%16]);
|
|
}
|
|
static void picolo_tetra_init(struct bttv *btv)
|
|
{
|
|
/*This is the video input redirection fonctionality : I DID NOT USED IT. */
|
|
btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
|
|
btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
|
|
}
|
|
static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
|
|
{
|
|
|
|
dprintk("%d : picolo_tetra_muxsel => input = %d\n", btv->c.nr, input);
|
|
/*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
|
|
/*GPIO[20]&GPIO[21] used to choose the right input*/
|
|
btwrite (input<<20,BT848_GPIO_DATA);
|
|
|
|
}
|
|
|
|
/*
|
|
* ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
|
|
*
|
|
* The IVC120G security card has 4 i2c controlled TDA8540 matrix
|
|
* swichers to provide 16 channels to MUX0. The TDA8540's have
|
|
* 4 independent outputs and as such the IVC120G also has the
|
|
* optional "Monitor Out" bus. This allows the card to be looking
|
|
* at one input while the monitor is looking at another.
|
|
*
|
|
* Since I've couldn't be bothered figuring out how to add an
|
|
* independent muxsel for the monitor bus, I've just set it to
|
|
* whatever the card is looking at.
|
|
*
|
|
* OUT0 of the TDA8540's is connected to MUX0 (0x03)
|
|
* OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
|
|
*
|
|
* TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
|
|
* TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
|
|
* TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
|
|
* TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
|
|
*
|
|
*/
|
|
|
|
/* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
|
|
#define I2C_TDA8540 0x90
|
|
#define I2C_TDA8540_ALT1 0x92
|
|
#define I2C_TDA8540_ALT2 0x94
|
|
#define I2C_TDA8540_ALT3 0x96
|
|
#define I2C_TDA8540_ALT4 0x98
|
|
#define I2C_TDA8540_ALT5 0x9a
|
|
#define I2C_TDA8540_ALT6 0x9c
|
|
|
|
static void ivc120_muxsel(struct bttv *btv, unsigned int input)
|
|
{
|
|
/* Simple maths */
|
|
int key = input % 4;
|
|
int matrix = input / 4;
|
|
|
|
dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
|
|
btv->c.nr, input, matrix, key);
|
|
|
|
/* Handles the input selection on the TDA8540's */
|
|
bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
|
|
((matrix == 3) ? (key | key << 2) : 0x00), 1);
|
|
bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
|
|
((matrix == 0) ? (key | key << 2) : 0x00), 1);
|
|
bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
|
|
((matrix == 1) ? (key | key << 2) : 0x00), 1);
|
|
bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
|
|
((matrix == 2) ? (key | key << 2) : 0x00), 1);
|
|
|
|
/* Handles the output enables on the TDA8540's */
|
|
bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
|
|
((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
|
|
bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
|
|
((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
|
|
bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
|
|
((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
|
|
bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
|
|
((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
|
|
|
|
/* 878's MUX0 is already selected for input via muxsel values */
|
|
}
|
|
|
|
|
|
/* PXC200 muxsel helper
|
|
* luke@syseng.anu.edu.au
|
|
* another transplant
|
|
* from Alessandro Rubini (rubini@linux.it)
|
|
*
|
|
* There are 4 kinds of cards:
|
|
* PXC200L which is bt848
|
|
* PXC200F which is bt848 with PIC controlling mux
|
|
* PXC200AL which is bt878
|
|
* PXC200AF which is bt878 with PIC controlling mux
|
|
*/
|
|
#define PX_CFG_PXC200F 0x01
|
|
#define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
|
|
#define PX_I2C_PIC 0x0f
|
|
#define PX_PXC200A_CARDID 0x200a1295
|
|
#define PX_I2C_CMD_CFG 0x00
|
|
|
|
static void PXC200_muxsel(struct bttv *btv, unsigned int input)
|
|
{
|
|
int rc;
|
|
long mux;
|
|
int bitmask;
|
|
unsigned char buf[2];
|
|
|
|
/* Read PIC config to determine if this is a PXC200F */
|
|
/* PX_I2C_CMD_CFG*/
|
|
buf[0]=0;
|
|
buf[1]=0;
|
|
rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
|
|
if (rc) {
|
|
pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n",
|
|
btv->c.nr, rc);
|
|
/* not PXC ? do nothing */
|
|
return;
|
|
}
|
|
|
|
rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
|
|
if (!(rc & PX_CFG_PXC200F)) {
|
|
pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n",
|
|
btv->c.nr, rc);
|
|
return;
|
|
}
|
|
|
|
|
|
/* The multiplexer in the 200F is handled by the GPIO port */
|
|
/* get correct mapping between inputs */
|
|
/* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
|
|
/* ** not needed!? */
|
|
mux = input;
|
|
|
|
/* make sure output pins are enabled */
|
|
/* bitmask=0x30f; */
|
|
bitmask=0x302;
|
|
/* check whether we have a PXC200A */
|
|
if (btv->cardid == PX_PXC200A_CARDID) {
|
|
bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
|
|
bitmask |= 7<<4; /* the DAC */
|
|
}
|
|
btwrite(bitmask, BT848_GPIO_OUT_EN);
|
|
|
|
bitmask = btread(BT848_GPIO_DATA);
|
|
if (btv->cardid == PX_PXC200A_CARDID)
|
|
bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
|
|
else /* older device */
|
|
bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
|
|
btwrite(bitmask,BT848_GPIO_DATA);
|
|
|
|
/*
|
|
* Was "to be safe, set the bt848 to input 0"
|
|
* Actually, since it's ok at load time, better not messing
|
|
* with these bits (on PXC200AF you need to set mux 2 here)
|
|
*
|
|
* needed because bttv-driver sets mux before calling this function
|
|
*/
|
|
if (btv->cardid == PX_PXC200A_CARDID)
|
|
btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
|
|
else /* older device */
|
|
btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
|
|
|
|
pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux);
|
|
}
|
|
|
|
static void phytec_muxsel(struct bttv *btv, unsigned int input)
|
|
{
|
|
unsigned int mux = input % 4;
|
|
|
|
if (input == btv->svhs)
|
|
mux = 0;
|
|
|
|
gpio_bits(0x3, mux);
|
|
}
|
|
|
|
/*
|
|
* GeoVision GV-800(S) functions
|
|
* Bruno Christo <bchristo@inf.ufsm.br>
|
|
*/
|
|
|
|
/* This is a function to control the analog switch, which determines which
|
|
* camera is routed to which controller. The switch comprises an X-address
|
|
* (gpio bits 0-3, representing the camera, ranging from 0-15), and a
|
|
* Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
|
|
* A data value (gpio bit 18) of '1' enables the switch, and '0' disables
|
|
* the switch. A STROBE bit (gpio bit 17) latches the data value into the
|
|
* specified address. There is also a chip select (gpio bit 16).
|
|
* The idea is to set the address and chip select together, bring
|
|
* STROBE high, write the data, and finally bring STROBE back to low.
|
|
*/
|
|
static void gv800s_write(struct bttv *btv,
|
|
unsigned char xaddr,
|
|
unsigned char yaddr,
|
|
unsigned char data) {
|
|
/* On the "master" 878A:
|
|
* GPIO bits 0-9 are used for the analog switch:
|
|
* 00 - 03: camera selector
|
|
* 04 - 06: 878A (controller) selector
|
|
* 16: cselect
|
|
* 17: strobe
|
|
* 18: data (1->on, 0->off)
|
|
* 19: reset
|
|
*/
|
|
const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
|
|
const u32 CSELECT = 1<<16;
|
|
const u32 STROBE = 1<<17;
|
|
const u32 DATA = data<<18;
|
|
|
|
gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */
|
|
gpio_bits(0x20000, STROBE); /* STROBE high */
|
|
gpio_bits(0x40000, DATA); /* write DATA */
|
|
gpio_bits(0x20000, ~STROBE); /* STROBE low */
|
|
}
|
|
|
|
/*
|
|
* GeoVision GV-800(S) muxsel
|
|
*
|
|
* Each of the 4 cards (controllers) use this function.
|
|
* The controller using this function selects the input through the GPIO pins
|
|
* of the "master" card. A pointer to this card is stored in master[btv->c.nr].
|
|
*
|
|
* The parameter 'input' is the requested camera number (0-4) on the controller.
|
|
* The map array has the address of each input. Note that the addresses in the
|
|
* array are in the sequence the original GeoVision driver uses, that is, set
|
|
* every controller to input 0, then to input 1, 2, 3, repeat. This means that
|
|
* the physical "camera 1" connector corresponds to controller 0 input 0,
|
|
* "camera 2" corresponds to controller 1 input 0, and so on.
|
|
*
|
|
* After getting the input address, the function then writes the appropriate
|
|
* data to the analog switch, and housekeeps the local copy of the switch
|
|
* information.
|
|
*/
|
|
static void gv800s_muxsel(struct bttv *btv, unsigned int input)
|
|
{
|
|
struct bttv *mctlr;
|
|
char *sw_status;
|
|
int xaddr, yaddr;
|
|
static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
|
|
{ 0x1, 0x5, 0xb, 0x7 },
|
|
{ 0x2, 0x8, 0xc, 0xe },
|
|
{ 0x3, 0x9, 0xd, 0xf } };
|
|
input = input%4;
|
|
mctlr = master[btv->c.nr];
|
|
if (mctlr == NULL) {
|
|
/* do nothing until the "master" is detected */
|
|
return;
|
|
}
|
|
yaddr = (btv->c.nr - mctlr->c.nr) & 3;
|
|
sw_status = (char *)(&mctlr->mbox_we);
|
|
xaddr = map[yaddr][input] & 0xf;
|
|
|
|
/* Check if the controller/camera pair has changed, ignore otherwise */
|
|
if (sw_status[yaddr] != xaddr) {
|
|
/* disable the old switch, enable the new one and save status */
|
|
gv800s_write(mctlr, sw_status[yaddr], yaddr, 0);
|
|
sw_status[yaddr] = xaddr;
|
|
gv800s_write(mctlr, xaddr, yaddr, 1);
|
|
}
|
|
}
|
|
|
|
/* GeoVision GV-800(S) "master" chip init */
|
|
static void gv800s_init(struct bttv *btv)
|
|
{
|
|
char *sw_status = (char *)(&btv->mbox_we);
|
|
int ix;
|
|
|
|
gpio_inout(0xf107f, 0xf107f);
|
|
gpio_write(1<<19); /* reset the analog MUX */
|
|
gpio_write(0);
|
|
|
|
/* Preset camera 0 to the 4 controllers */
|
|
for (ix = 0; ix < 4; ix++) {
|
|
sw_status[ix] = ix;
|
|
gv800s_write(btv, ix, ix, 1);
|
|
}
|
|
|
|
/* Inputs on the "master" controller need this brightness fix */
|
|
bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
|
|
|
|
if (btv->c.nr > BTTV_MAX-4)
|
|
return;
|
|
/*
|
|
* Store the "master" controller pointer in the master
|
|
* array for later use in the muxsel function.
|
|
*/
|
|
master[btv->c.nr] = btv;
|
|
master[btv->c.nr+1] = btv;
|
|
master[btv->c.nr+2] = btv;
|
|
master[btv->c.nr+3] = btv;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
/* motherboard chipset specific stuff */
|
|
|
|
void __init bttv_check_chipset(void)
|
|
{
|
|
int pcipci_fail = 0;
|
|
struct pci_dev *dev = NULL;
|
|
|
|
if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */
|
|
pcipci_fail = 1;
|
|
if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
|
|
triton1 = 1;
|
|
if (pci_pci_problems & PCIPCI_VSFX)
|
|
vsfx = 1;
|
|
#ifdef PCIPCI_ALIMAGIK
|
|
if (pci_pci_problems & PCIPCI_ALIMAGIK)
|
|
latency = 0x0A;
|
|
#endif
|
|
|
|
|
|
/* print warnings about any quirks found */
|
|
if (triton1)
|
|
pr_info("Host bridge needs ETBF enabled\n");
|
|
if (vsfx)
|
|
pr_info("Host bridge needs VSFX enabled\n");
|
|
if (pcipci_fail) {
|
|
pr_info("bttv and your chipset may not work together\n");
|
|
if (!no_overlay) {
|
|
pr_info("overlay will be disabled\n");
|
|
no_overlay = 1;
|
|
} else {
|
|
pr_info("overlay forced. Use this option at your own risk.\n");
|
|
}
|
|
}
|
|
if (UNSET != latency)
|
|
pr_info("pci latency fixup [%d]\n", latency);
|
|
while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
|
|
PCI_DEVICE_ID_INTEL_82441, dev))) {
|
|
unsigned char b;
|
|
pci_read_config_byte(dev, 0x53, &b);
|
|
if (bttv_debug)
|
|
pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n",
|
|
b);
|
|
}
|
|
}
|
|
|
|
int bttv_handle_chipset(struct bttv *btv)
|
|
{
|
|
unsigned char command;
|
|
|
|
if (!triton1 && !vsfx && UNSET == latency)
|
|
return 0;
|
|
|
|
if (bttv_verbose) {
|
|
if (triton1)
|
|
pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n",
|
|
btv->c.nr);
|
|
if (vsfx && btv->id >= 878)
|
|
pr_info("%d: enabling VSFX\n", btv->c.nr);
|
|
if (UNSET != latency)
|
|
pr_info("%d: setting pci timer to %d\n",
|
|
btv->c.nr, latency);
|
|
}
|
|
|
|
if (btv->id < 878) {
|
|
/* bt848 (mis)uses a bit in the irq mask for etbf */
|
|
if (triton1)
|
|
btv->triton1 = BT848_INT_ETBF;
|
|
} else {
|
|
/* bt878 has a bit in the pci config space for it */
|
|
pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
|
|
if (triton1)
|
|
command |= BT878_EN_TBFX;
|
|
if (vsfx)
|
|
command |= BT878_EN_VSFX;
|
|
pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
|
|
}
|
|
if (UNSET != latency)
|
|
pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Local variables:
|
|
* c-basic-offset: 8
|
|
* End:
|
|
*/
|