![Mauro Carvalho Chehab](/assets/img/avatar_default.png)
Rename all PCI drivers with their own directory under drivers/media/video into drivers/media/pci and update the building system. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
460 lines
15 KiB
C
460 lines
15 KiB
C
/*
|
|
* cx18 firmware functions
|
|
*
|
|
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
|
|
* Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
|
|
* 02111-1307 USA
|
|
*/
|
|
|
|
#include "cx18-driver.h"
|
|
#include "cx18-io.h"
|
|
#include "cx18-scb.h"
|
|
#include "cx18-irq.h"
|
|
#include "cx18-firmware.h"
|
|
#include "cx18-cards.h"
|
|
#include <linux/firmware.h>
|
|
|
|
#define CX18_PROC_SOFT_RESET 0xc70010
|
|
#define CX18_DDR_SOFT_RESET 0xc70014
|
|
#define CX18_CLOCK_SELECT1 0xc71000
|
|
#define CX18_CLOCK_SELECT2 0xc71004
|
|
#define CX18_HALF_CLOCK_SELECT1 0xc71008
|
|
#define CX18_HALF_CLOCK_SELECT2 0xc7100C
|
|
#define CX18_CLOCK_POLARITY1 0xc71010
|
|
#define CX18_CLOCK_POLARITY2 0xc71014
|
|
#define CX18_ADD_DELAY_ENABLE1 0xc71018
|
|
#define CX18_ADD_DELAY_ENABLE2 0xc7101C
|
|
#define CX18_CLOCK_ENABLE1 0xc71020
|
|
#define CX18_CLOCK_ENABLE2 0xc71024
|
|
|
|
#define CX18_REG_BUS_TIMEOUT_EN 0xc72024
|
|
|
|
#define CX18_FAST_CLOCK_PLL_INT 0xc78000
|
|
#define CX18_FAST_CLOCK_PLL_FRAC 0xc78004
|
|
#define CX18_FAST_CLOCK_PLL_POST 0xc78008
|
|
#define CX18_FAST_CLOCK_PLL_PRESCALE 0xc7800C
|
|
#define CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH 0xc78010
|
|
|
|
#define CX18_SLOW_CLOCK_PLL_INT 0xc78014
|
|
#define CX18_SLOW_CLOCK_PLL_FRAC 0xc78018
|
|
#define CX18_SLOW_CLOCK_PLL_POST 0xc7801C
|
|
#define CX18_MPEG_CLOCK_PLL_INT 0xc78040
|
|
#define CX18_MPEG_CLOCK_PLL_FRAC 0xc78044
|
|
#define CX18_MPEG_CLOCK_PLL_POST 0xc78048
|
|
#define CX18_PLL_POWER_DOWN 0xc78088
|
|
#define CX18_SW1_INT_STATUS 0xc73104
|
|
#define CX18_SW1_INT_ENABLE_PCI 0xc7311C
|
|
#define CX18_SW2_INT_SET 0xc73140
|
|
#define CX18_SW2_INT_STATUS 0xc73144
|
|
#define CX18_ADEC_CONTROL 0xc78120
|
|
|
|
#define CX18_DDR_REQUEST_ENABLE 0xc80000
|
|
#define CX18_DDR_CHIP_CONFIG 0xc80004
|
|
#define CX18_DDR_REFRESH 0xc80008
|
|
#define CX18_DDR_TIMING1 0xc8000C
|
|
#define CX18_DDR_TIMING2 0xc80010
|
|
#define CX18_DDR_POWER_REG 0xc8001C
|
|
|
|
#define CX18_DDR_TUNE_LANE 0xc80048
|
|
#define CX18_DDR_INITIAL_EMRS 0xc80054
|
|
#define CX18_DDR_MB_PER_ROW_7 0xc8009C
|
|
#define CX18_DDR_BASE_63_ADDR 0xc804FC
|
|
|
|
#define CX18_WMB_CLIENT02 0xc90108
|
|
#define CX18_WMB_CLIENT05 0xc90114
|
|
#define CX18_WMB_CLIENT06 0xc90118
|
|
#define CX18_WMB_CLIENT07 0xc9011C
|
|
#define CX18_WMB_CLIENT08 0xc90120
|
|
#define CX18_WMB_CLIENT09 0xc90124
|
|
#define CX18_WMB_CLIENT10 0xc90128
|
|
#define CX18_WMB_CLIENT11 0xc9012C
|
|
#define CX18_WMB_CLIENT12 0xc90130
|
|
#define CX18_WMB_CLIENT13 0xc90134
|
|
#define CX18_WMB_CLIENT14 0xc90138
|
|
|
|
#define CX18_DSP0_INTERRUPT_MASK 0xd0004C
|
|
|
|
#define APU_ROM_SYNC1 0x6D676553 /* "mgeS" */
|
|
#define APU_ROM_SYNC2 0x72646548 /* "rdeH" */
|
|
|
|
struct cx18_apu_rom_seghdr {
|
|
u32 sync1;
|
|
u32 sync2;
|
|
u32 addr;
|
|
u32 size;
|
|
};
|
|
|
|
static int load_cpu_fw_direct(const char *fn, u8 __iomem *mem, struct cx18 *cx)
|
|
{
|
|
const struct firmware *fw = NULL;
|
|
int i, j;
|
|
unsigned size;
|
|
u32 __iomem *dst = (u32 __iomem *)mem;
|
|
const u32 *src;
|
|
|
|
if (request_firmware(&fw, fn, &cx->pci_dev->dev)) {
|
|
CX18_ERR("Unable to open firmware %s\n", fn);
|
|
CX18_ERR("Did you put the firmware in the hotplug firmware directory?\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
src = (const u32 *)fw->data;
|
|
|
|
for (i = 0; i < fw->size; i += 4096) {
|
|
cx18_setup_page(cx, i);
|
|
for (j = i; j < fw->size && j < i + 4096; j += 4) {
|
|
/* no need for endianness conversion on the ppc */
|
|
cx18_raw_writel(cx, *src, dst);
|
|
if (cx18_raw_readl(cx, dst) != *src) {
|
|
CX18_ERR("Mismatch at offset %x\n", i);
|
|
release_firmware(fw);
|
|
cx18_setup_page(cx, 0);
|
|
return -EIO;
|
|
}
|
|
dst++;
|
|
src++;
|
|
}
|
|
}
|
|
if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags))
|
|
CX18_INFO("loaded %s firmware (%zd bytes)\n", fn, fw->size);
|
|
size = fw->size;
|
|
release_firmware(fw);
|
|
cx18_setup_page(cx, SCB_OFFSET);
|
|
return size;
|
|
}
|
|
|
|
static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx,
|
|
u32 *entry_addr)
|
|
{
|
|
const struct firmware *fw = NULL;
|
|
int i, j;
|
|
unsigned size;
|
|
const u32 *src;
|
|
struct cx18_apu_rom_seghdr seghdr;
|
|
const u8 *vers;
|
|
u32 offset = 0;
|
|
u32 apu_version = 0;
|
|
int sz;
|
|
|
|
if (request_firmware(&fw, fn, &cx->pci_dev->dev)) {
|
|
CX18_ERR("unable to open firmware %s\n", fn);
|
|
CX18_ERR("did you put the firmware in the hotplug firmware directory?\n");
|
|
cx18_setup_page(cx, 0);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
*entry_addr = 0;
|
|
src = (const u32 *)fw->data;
|
|
vers = fw->data + sizeof(seghdr);
|
|
sz = fw->size;
|
|
|
|
apu_version = (vers[0] << 24) | (vers[4] << 16) | vers[32];
|
|
while (offset + sizeof(seghdr) < fw->size) {
|
|
const u32 *shptr = src + offset / 4;
|
|
|
|
seghdr.sync1 = le32_to_cpu(shptr[0]);
|
|
seghdr.sync2 = le32_to_cpu(shptr[1]);
|
|
seghdr.addr = le32_to_cpu(shptr[2]);
|
|
seghdr.size = le32_to_cpu(shptr[3]);
|
|
|
|
offset += sizeof(seghdr);
|
|
if (seghdr.sync1 != APU_ROM_SYNC1 ||
|
|
seghdr.sync2 != APU_ROM_SYNC2) {
|
|
offset += seghdr.size;
|
|
continue;
|
|
}
|
|
CX18_DEBUG_INFO("load segment %x-%x\n", seghdr.addr,
|
|
seghdr.addr + seghdr.size - 1);
|
|
if (*entry_addr == 0)
|
|
*entry_addr = seghdr.addr;
|
|
if (offset + seghdr.size > sz)
|
|
break;
|
|
for (i = 0; i < seghdr.size; i += 4096) {
|
|
cx18_setup_page(cx, seghdr.addr + i);
|
|
for (j = i; j < seghdr.size && j < i + 4096; j += 4) {
|
|
/* no need for endianness conversion on the ppc */
|
|
cx18_raw_writel(cx, src[(offset + j) / 4],
|
|
dst + seghdr.addr + j);
|
|
if (cx18_raw_readl(cx, dst + seghdr.addr + j)
|
|
!= src[(offset + j) / 4]) {
|
|
CX18_ERR("Mismatch at offset %x\n",
|
|
offset + j);
|
|
release_firmware(fw);
|
|
cx18_setup_page(cx, 0);
|
|
return -EIO;
|
|
}
|
|
}
|
|
}
|
|
offset += seghdr.size;
|
|
}
|
|
if (!test_bit(CX18_F_I_LOADED_FW, &cx->i_flags))
|
|
CX18_INFO("loaded %s firmware V%08x (%zd bytes)\n",
|
|
fn, apu_version, fw->size);
|
|
size = fw->size;
|
|
release_firmware(fw);
|
|
cx18_setup_page(cx, 0);
|
|
return size;
|
|
}
|
|
|
|
void cx18_halt_firmware(struct cx18 *cx)
|
|
{
|
|
CX18_DEBUG_INFO("Preparing for firmware halt.\n");
|
|
cx18_write_reg_expect(cx, 0x000F000F, CX18_PROC_SOFT_RESET,
|
|
0x0000000F, 0x000F000F);
|
|
cx18_write_reg_expect(cx, 0x00020002, CX18_ADEC_CONTROL,
|
|
0x00000002, 0x00020002);
|
|
}
|
|
|
|
void cx18_init_power(struct cx18 *cx, int lowpwr)
|
|
{
|
|
/* power-down Spare and AOM PLLs */
|
|
/* power-up fast, slow and mpeg PLLs */
|
|
cx18_write_reg(cx, 0x00000008, CX18_PLL_POWER_DOWN);
|
|
|
|
/* ADEC out of sleep */
|
|
cx18_write_reg_expect(cx, 0x00020000, CX18_ADEC_CONTROL,
|
|
0x00000000, 0x00020002);
|
|
|
|
/*
|
|
* The PLL parameters are based on the external crystal frequency that
|
|
* would ideally be:
|
|
*
|
|
* NTSC Color subcarrier freq * 8 =
|
|
* 4.5 MHz/286 * 455/2 * 8 = 28.63636363... MHz
|
|
*
|
|
* The accidents of history and rationale that explain from where this
|
|
* combination of magic numbers originate can be found in:
|
|
*
|
|
* [1] Abrahams, I. C., "Choice of Chrominance Subcarrier Frequency in
|
|
* the NTSC Standards", Proceedings of the I-R-E, January 1954, pp 79-80
|
|
*
|
|
* [2] Abrahams, I. C., "The 'Frequency Interleaving' Principle in the
|
|
* NTSC Standards", Proceedings of the I-R-E, January 1954, pp 81-83
|
|
*
|
|
* As Mike Bradley has rightly pointed out, it's not the exact crystal
|
|
* frequency that matters, only that all parts of the driver and
|
|
* firmware are using the same value (close to the ideal value).
|
|
*
|
|
* Since I have a strong suspicion that, if the firmware ever assumes a
|
|
* crystal value at all, it will assume 28.636360 MHz, the crystal
|
|
* freq used in calculations in this driver will be:
|
|
*
|
|
* xtal_freq = 28.636360 MHz
|
|
*
|
|
* an error of less than 0.13 ppm which is way, way better than any off
|
|
* the shelf crystal will have for accuracy anyway.
|
|
*
|
|
* Below I aim to run the PLLs' VCOs near 400 MHz to minimze errors.
|
|
*
|
|
* Many thanks to Jeff Campbell and Mike Bradley for their extensive
|
|
* investigation, experimentation, testing, and suggested solutions of
|
|
* of audio/video sync problems with SVideo and CVBS captures.
|
|
*/
|
|
|
|
/* the fast clock is at 200/245 MHz */
|
|
/* 1 * xtal_freq * 0x0d.f7df9b8 / 2 = 200 MHz: 400 MHz pre post-divide*/
|
|
/* 1 * xtal_freq * 0x11.1c71eb8 / 2 = 245 MHz: 490 MHz pre post-divide*/
|
|
cx18_write_reg(cx, lowpwr ? 0xD : 0x11, CX18_FAST_CLOCK_PLL_INT);
|
|
cx18_write_reg(cx, lowpwr ? 0x1EFBF37 : 0x038E3D7,
|
|
CX18_FAST_CLOCK_PLL_FRAC);
|
|
|
|
cx18_write_reg(cx, 2, CX18_FAST_CLOCK_PLL_POST);
|
|
cx18_write_reg(cx, 1, CX18_FAST_CLOCK_PLL_PRESCALE);
|
|
cx18_write_reg(cx, 4, CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH);
|
|
|
|
/* set slow clock to 125/120 MHz */
|
|
/* xtal_freq * 0x0d.1861a20 / 3 = 125 MHz: 375 MHz before post-divide */
|
|
/* xtal_freq * 0x0c.92493f8 / 3 = 120 MHz: 360 MHz before post-divide */
|
|
cx18_write_reg(cx, lowpwr ? 0xD : 0xC, CX18_SLOW_CLOCK_PLL_INT);
|
|
cx18_write_reg(cx, lowpwr ? 0x30C344 : 0x124927F,
|
|
CX18_SLOW_CLOCK_PLL_FRAC);
|
|
cx18_write_reg(cx, 3, CX18_SLOW_CLOCK_PLL_POST);
|
|
|
|
/* mpeg clock pll 54MHz */
|
|
/* xtal_freq * 0xf.15f17f0 / 8 = 54 MHz: 432 MHz before post-divide */
|
|
cx18_write_reg(cx, 0xF, CX18_MPEG_CLOCK_PLL_INT);
|
|
cx18_write_reg(cx, 0x2BE2FE, CX18_MPEG_CLOCK_PLL_FRAC);
|
|
cx18_write_reg(cx, 8, CX18_MPEG_CLOCK_PLL_POST);
|
|
|
|
/* Defaults */
|
|
/* APU = SC or SC/2 = 125/62.5 */
|
|
/* EPU = SC = 125 */
|
|
/* DDR = FC = 180 */
|
|
/* ENC = SC = 125 */
|
|
/* AI1 = SC = 125 */
|
|
/* VIM2 = disabled */
|
|
/* PCI = FC/2 = 90 */
|
|
/* AI2 = disabled */
|
|
/* DEMUX = disabled */
|
|
/* AO = SC/2 = 62.5 */
|
|
/* SER = 54MHz */
|
|
/* VFC = disabled */
|
|
/* USB = disabled */
|
|
|
|
if (lowpwr) {
|
|
cx18_write_reg_expect(cx, 0xFFFF0020, CX18_CLOCK_SELECT1,
|
|
0x00000020, 0xFFFFFFFF);
|
|
cx18_write_reg_expect(cx, 0xFFFF0004, CX18_CLOCK_SELECT2,
|
|
0x00000004, 0xFFFFFFFF);
|
|
} else {
|
|
/* This doesn't explicitly set every clock select */
|
|
cx18_write_reg_expect(cx, 0x00060004, CX18_CLOCK_SELECT1,
|
|
0x00000004, 0x00060006);
|
|
cx18_write_reg_expect(cx, 0x00060006, CX18_CLOCK_SELECT2,
|
|
0x00000006, 0x00060006);
|
|
}
|
|
|
|
cx18_write_reg_expect(cx, 0xFFFF0002, CX18_HALF_CLOCK_SELECT1,
|
|
0x00000002, 0xFFFFFFFF);
|
|
cx18_write_reg_expect(cx, 0xFFFF0104, CX18_HALF_CLOCK_SELECT2,
|
|
0x00000104, 0xFFFFFFFF);
|
|
cx18_write_reg_expect(cx, 0xFFFF9026, CX18_CLOCK_ENABLE1,
|
|
0x00009026, 0xFFFFFFFF);
|
|
cx18_write_reg_expect(cx, 0xFFFF3105, CX18_CLOCK_ENABLE2,
|
|
0x00003105, 0xFFFFFFFF);
|
|
}
|
|
|
|
void cx18_init_memory(struct cx18 *cx)
|
|
{
|
|
cx18_msleep_timeout(10, 0);
|
|
cx18_write_reg_expect(cx, 0x00010000, CX18_DDR_SOFT_RESET,
|
|
0x00000000, 0x00010001);
|
|
cx18_msleep_timeout(10, 0);
|
|
|
|
cx18_write_reg(cx, cx->card->ddr.chip_config, CX18_DDR_CHIP_CONFIG);
|
|
|
|
cx18_msleep_timeout(10, 0);
|
|
|
|
cx18_write_reg(cx, cx->card->ddr.refresh, CX18_DDR_REFRESH);
|
|
cx18_write_reg(cx, cx->card->ddr.timing1, CX18_DDR_TIMING1);
|
|
cx18_write_reg(cx, cx->card->ddr.timing2, CX18_DDR_TIMING2);
|
|
|
|
cx18_msleep_timeout(10, 0);
|
|
|
|
/* Initialize DQS pad time */
|
|
cx18_write_reg(cx, cx->card->ddr.tune_lane, CX18_DDR_TUNE_LANE);
|
|
cx18_write_reg(cx, cx->card->ddr.initial_emrs, CX18_DDR_INITIAL_EMRS);
|
|
|
|
cx18_msleep_timeout(10, 0);
|
|
|
|
cx18_write_reg_expect(cx, 0x00020000, CX18_DDR_SOFT_RESET,
|
|
0x00000000, 0x00020002);
|
|
cx18_msleep_timeout(10, 0);
|
|
|
|
/* use power-down mode when idle */
|
|
cx18_write_reg(cx, 0x00000010, CX18_DDR_POWER_REG);
|
|
|
|
cx18_write_reg_expect(cx, 0x00010001, CX18_REG_BUS_TIMEOUT_EN,
|
|
0x00000001, 0x00010001);
|
|
|
|
cx18_write_reg(cx, 0x48, CX18_DDR_MB_PER_ROW_7);
|
|
cx18_write_reg(cx, 0xE0000, CX18_DDR_BASE_63_ADDR);
|
|
|
|
cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT02); /* AO */
|
|
cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT09); /* AI2 */
|
|
cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT05); /* VIM1 */
|
|
cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT06); /* AI1 */
|
|
cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT07); /* 3D comb */
|
|
cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT10); /* ME */
|
|
cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT12); /* ENC */
|
|
cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT13); /* PK */
|
|
cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT11); /* RC */
|
|
cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT14); /* AVO */
|
|
}
|
|
|
|
#define CX18_CPU_FIRMWARE "v4l-cx23418-cpu.fw"
|
|
#define CX18_APU_FIRMWARE "v4l-cx23418-apu.fw"
|
|
|
|
int cx18_firmware_init(struct cx18 *cx)
|
|
{
|
|
u32 fw_entry_addr;
|
|
int sz, retries;
|
|
u32 api_args[MAX_MB_ARGUMENTS];
|
|
|
|
/* Allow chip to control CLKRUN */
|
|
cx18_write_reg(cx, 0x5, CX18_DSP0_INTERRUPT_MASK);
|
|
|
|
/* Stop the firmware */
|
|
cx18_write_reg_expect(cx, 0x000F000F, CX18_PROC_SOFT_RESET,
|
|
0x0000000F, 0x000F000F);
|
|
|
|
cx18_msleep_timeout(1, 0);
|
|
|
|
/* If the CPU is still running */
|
|
if ((cx18_read_reg(cx, CX18_PROC_SOFT_RESET) & 8) == 0) {
|
|
CX18_ERR("%s: couldn't stop CPU to load firmware\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
cx18_sw1_irq_enable(cx, IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU);
|
|
cx18_sw2_irq_enable(cx, IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK);
|
|
|
|
sz = load_cpu_fw_direct(CX18_CPU_FIRMWARE, cx->enc_mem, cx);
|
|
if (sz <= 0)
|
|
return sz;
|
|
|
|
/* The SCB & IPC area *must* be correct before starting the firmwares */
|
|
cx18_init_scb(cx);
|
|
|
|
fw_entry_addr = 0;
|
|
sz = load_apu_fw_direct(CX18_APU_FIRMWARE, cx->enc_mem, cx,
|
|
&fw_entry_addr);
|
|
if (sz <= 0)
|
|
return sz;
|
|
|
|
/* Start the CPU. The CPU will take care of the APU for us. */
|
|
cx18_write_reg_expect(cx, 0x00080000, CX18_PROC_SOFT_RESET,
|
|
0x00000000, 0x00080008);
|
|
|
|
/* Wait up to 500 ms for the APU to come out of reset */
|
|
for (retries = 0;
|
|
retries < 50 && (cx18_read_reg(cx, CX18_PROC_SOFT_RESET) & 1) == 1;
|
|
retries++)
|
|
cx18_msleep_timeout(10, 0);
|
|
|
|
cx18_msleep_timeout(200, 0);
|
|
|
|
if (retries == 50 &&
|
|
(cx18_read_reg(cx, CX18_PROC_SOFT_RESET) & 1) == 1) {
|
|
CX18_ERR("Could not start the CPU\n");
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* The CPU had once before set up to receive an interrupt for it's
|
|
* outgoing IRQ_CPU_TO_EPU_ACK to us. If it ever does this, we get an
|
|
* interrupt when it sends us an ack, but by the time we process it,
|
|
* that flag in the SW2 status register has been cleared by the CPU
|
|
* firmware. We'll prevent that not so useful condition from happening
|
|
* by clearing the CPU's interrupt enables for Ack IRQ's we want to
|
|
* process.
|
|
*/
|
|
cx18_sw2_irq_disable_cpu(cx, IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK);
|
|
|
|
/* Try a benign command to see if the CPU is alive and well */
|
|
sz = cx18_vapi_result(cx, api_args, CX18_CPU_DEBUG_PEEK32, 1, 0);
|
|
if (sz < 0)
|
|
return sz;
|
|
|
|
/* initialize GPIO */
|
|
cx18_write_reg_expect(cx, 0x14001400, 0xc78110, 0x00001400, 0x14001400);
|
|
return 0;
|
|
}
|
|
|
|
MODULE_FIRMWARE(CX18_CPU_FIRMWARE);
|
|
MODULE_FIRMWARE(CX18_APU_FIRMWARE);
|