![Pavankumar Kondeti](/assets/img/avatar_default.png)
Implement good battery algorithm defined in the battery charging V1.2 spec for detecting different charging ports. USB hardware is put into low power mode when connected to a dedicated charging port. vbus_draw and set_power methods are implemented for determining the allowed current from Host in different states (un-configured/suspend/configured). The charger block is implemented using vendor specific registers and the PHY used in MSM8960(28nm PHY) different from older targets like MSM8x60 and MSM7x30(45nm PHY). The PHY vendor and product id registers are not implemented in the above chipsets. Hence PHY type is passed via platform data. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
186 lines
5.4 KiB
C
186 lines
5.4 KiB
C
/* linux/include/asm-arm/arch-msm/hsusb.h
|
|
*
|
|
* Copyright (C) 2008 Google, Inc.
|
|
* Author: Brian Swetland <swetland@google.com>
|
|
* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
|
|
*
|
|
* This software is licensed under the terms of the GNU General Public
|
|
* License version 2, as published by the Free Software Foundation, and
|
|
* may be copied, distributed, and modified under those terms.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#ifndef __ASM_ARCH_MSM_HSUSB_H
|
|
#define __ASM_ARCH_MSM_HSUSB_H
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/usb/otg.h>
|
|
|
|
/**
|
|
* Supported USB modes
|
|
*
|
|
* USB_PERIPHERAL Only peripheral mode is supported.
|
|
* USB_HOST Only host mode is supported.
|
|
* USB_OTG OTG mode is supported.
|
|
*
|
|
*/
|
|
enum usb_mode_type {
|
|
USB_NONE = 0,
|
|
USB_PERIPHERAL,
|
|
USB_HOST,
|
|
USB_OTG,
|
|
};
|
|
|
|
/**
|
|
* OTG control
|
|
*
|
|
* OTG_NO_CONTROL Id/VBUS notifications not required. Useful in host
|
|
* only configuration.
|
|
* OTG_PHY_CONTROL Id/VBUS notifications comes form USB PHY.
|
|
* OTG_PMIC_CONTROL Id/VBUS notifications comes from PMIC hardware.
|
|
* OTG_USER_CONTROL Id/VBUS notifcations comes from User via sysfs.
|
|
*
|
|
*/
|
|
enum otg_control_type {
|
|
OTG_NO_CONTROL = 0,
|
|
OTG_PHY_CONTROL,
|
|
OTG_PMIC_CONTROL,
|
|
OTG_USER_CONTROL,
|
|
};
|
|
|
|
/**
|
|
* PHY used in
|
|
*
|
|
* INVALID_PHY Unsupported PHY
|
|
* CI_45NM_INTEGRATED_PHY Chipidea 45nm integrated PHY
|
|
* SNPS_28NM_INTEGRATED_PHY Synopsis 28nm integrated PHY
|
|
*
|
|
*/
|
|
enum msm_usb_phy_type {
|
|
INVALID_PHY = 0,
|
|
CI_45NM_INTEGRATED_PHY,
|
|
SNPS_28NM_INTEGRATED_PHY,
|
|
};
|
|
|
|
#define IDEV_CHG_MAX 1500
|
|
#define IUNIT 100
|
|
|
|
/**
|
|
* Different states involved in USB charger detection.
|
|
*
|
|
* USB_CHG_STATE_UNDEFINED USB charger is not connected or detection
|
|
* process is not yet started.
|
|
* USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact.
|
|
* USB_CHG_STATE_DCD_DONE Data pin contact is detected.
|
|
* USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects
|
|
* between SDP and DCP/CDP).
|
|
* USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects
|
|
* between DCP and CDP).
|
|
* USB_CHG_STATE_DETECTED USB charger type is determined.
|
|
*
|
|
*/
|
|
enum usb_chg_state {
|
|
USB_CHG_STATE_UNDEFINED = 0,
|
|
USB_CHG_STATE_WAIT_FOR_DCD,
|
|
USB_CHG_STATE_DCD_DONE,
|
|
USB_CHG_STATE_PRIMARY_DONE,
|
|
USB_CHG_STATE_SECONDARY_DONE,
|
|
USB_CHG_STATE_DETECTED,
|
|
};
|
|
|
|
/**
|
|
* USB charger types
|
|
*
|
|
* USB_INVALID_CHARGER Invalid USB charger.
|
|
* USB_SDP_CHARGER Standard downstream port. Refers to a downstream port
|
|
* on USB2.0 compliant host/hub.
|
|
* USB_DCP_CHARGER Dedicated charger port (AC charger/ Wall charger).
|
|
* USB_CDP_CHARGER Charging downstream port. Enumeration can happen and
|
|
* IDEV_CHG_MAX can be drawn irrespective of USB state.
|
|
*
|
|
*/
|
|
enum usb_chg_type {
|
|
USB_INVALID_CHARGER = 0,
|
|
USB_SDP_CHARGER,
|
|
USB_DCP_CHARGER,
|
|
USB_CDP_CHARGER,
|
|
};
|
|
|
|
/**
|
|
* struct msm_otg_platform_data - platform device data
|
|
* for msm_otg driver.
|
|
* @phy_init_seq: PHY configuration sequence. val, reg pairs
|
|
* terminated by -1.
|
|
* @vbus_power: VBUS power on/off routine.
|
|
* @power_budget: VBUS power budget in mA (0 will be treated as 500mA).
|
|
* @mode: Supported mode (OTG/peripheral/host).
|
|
* @otg_control: OTG switch controlled by user/Id pin
|
|
* @default_mode: Default operational mode. Applicable only if
|
|
* OTG switch is controller by user.
|
|
* @pclk_src_name: pclk is derived from ebi1_usb_clk in case of 7x27 and 8k
|
|
* dfab_usb_hs_clk in case of 8660 and 8960.
|
|
*/
|
|
struct msm_otg_platform_data {
|
|
int *phy_init_seq;
|
|
void (*vbus_power)(bool on);
|
|
unsigned power_budget;
|
|
enum usb_mode_type mode;
|
|
enum otg_control_type otg_control;
|
|
enum usb_mode_type default_mode;
|
|
enum msm_usb_phy_type phy_type;
|
|
void (*setup_gpio)(enum usb_otg_state state);
|
|
char *pclk_src_name;
|
|
};
|
|
|
|
/**
|
|
* struct msm_otg: OTG driver data. Shared by HCD and DCD.
|
|
* @otg: USB OTG Transceiver structure.
|
|
* @pdata: otg device platform data.
|
|
* @irq: IRQ number assigned for HSUSB controller.
|
|
* @clk: clock struct of usb_hs_clk.
|
|
* @pclk: clock struct of usb_hs_pclk.
|
|
* @pclk_src: pclk source for voting.
|
|
* @phy_reset_clk: clock struct of usb_phy_clk.
|
|
* @core_clk: clock struct of usb_hs_core_clk.
|
|
* @regs: ioremapped register base address.
|
|
* @inputs: OTG state machine inputs(Id, SessValid etc).
|
|
* @sm_work: OTG state machine work.
|
|
* @in_lpm: indicates low power mode (LPM) state.
|
|
* @async_int: Async interrupt arrived.
|
|
* @cur_power: The amount of mA available from downstream port.
|
|
* @chg_work: Charger detection work.
|
|
* @chg_state: The state of charger detection process.
|
|
* @chg_type: The type of charger attached.
|
|
* @dcd_retires: The retry count used to track Data contact
|
|
* detection process.
|
|
*/
|
|
struct msm_otg {
|
|
struct otg_transceiver otg;
|
|
struct msm_otg_platform_data *pdata;
|
|
int irq;
|
|
struct clk *clk;
|
|
struct clk *pclk;
|
|
struct clk *pclk_src;
|
|
struct clk *phy_reset_clk;
|
|
struct clk *core_clk;
|
|
void __iomem *regs;
|
|
#define ID 0
|
|
#define B_SESS_VLD 1
|
|
unsigned long inputs;
|
|
struct work_struct sm_work;
|
|
atomic_t in_lpm;
|
|
int async_int;
|
|
unsigned cur_power;
|
|
struct delayed_work chg_work;
|
|
enum usb_chg_state chg_state;
|
|
enum usb_chg_type chg_type;
|
|
u8 dcd_retries;
|
|
};
|
|
|
|
#endif
|