1637d480f8
This converts the Nomadik pin controller and all associated device trees to use the standard, generic config bindings for pin controllers. There are no such device trees deployed in the wild so this is safe to do to set a good example. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
129 lines
2.6 KiB
Plaintext
129 lines
2.6 KiB
Plaintext
/*
|
|
* Copyright 2012 ST-Ericsson AB
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*
|
|
* Device Tree for the HREF+ prior to the v60 variant.
|
|
*/
|
|
|
|
#include "ste-dbx5x0.dtsi"
|
|
#include "ste-href-ab8500.dtsi"
|
|
#include "ste-href.dtsi"
|
|
|
|
/ {
|
|
gpio_keys {
|
|
button@1 {
|
|
gpios = <&tc3589x_gpio 7 0x4>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
i2c@80004000 {
|
|
tps61052@33 {
|
|
compatible = "tps61052";
|
|
reg = <0x33>;
|
|
};
|
|
|
|
tc35892@42 {
|
|
compatible = "toshiba,tc35892";
|
|
reg = <0x42>;
|
|
interrupt-parent = <&gpio6>;
|
|
interrupts = <25 IRQ_TYPE_EDGE_RISING>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&tc35892_hrefprev60_mode>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
tc3589x_gpio: tc3589x_gpio {
|
|
compatible = "tc3589x-gpio";
|
|
interrupts = <0>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
ssp@80002000 {
|
|
/*
|
|
* On the first generation boards, this SSP/SPI port was connected
|
|
* to the AB8500.
|
|
*/
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ssp0_hrefprev60_mode>;
|
|
};
|
|
|
|
// External Micro SD slot
|
|
sdi0_per1@80126000 {
|
|
cd-gpios = <&tc3589x_gpio 3 0x4>;
|
|
};
|
|
|
|
vmmci: regulator-gpio {
|
|
gpios = <&tc3589x_gpio 18 0x4>;
|
|
enable-gpio = <&tc3589x_gpio 17 0x4>;
|
|
};
|
|
|
|
pinctrl {
|
|
/* Set this up using hogs */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ipgpio_hrefprev60_mode>;
|
|
|
|
ssp0 {
|
|
ssp0_hrefprev60_mode: ssp0_hrefprev60_default {
|
|
hrefprev60_mux {
|
|
function = "ssp0";
|
|
groups = "ssp0_a_1";
|
|
};
|
|
hrefprev60_cfg1 {
|
|
pins = "GPIO145_C13"; /* RXD */
|
|
ste,config = <&in_pd>;
|
|
};
|
|
|
|
};
|
|
};
|
|
sdi0 {
|
|
/* This additional pin needed on early MOP500 and HREFs previous to v60 */
|
|
sdi0_default_mode: sdi0_default {
|
|
hrefprev60_mux {
|
|
function = "mc0";
|
|
groups = "mc0dat31dir_a_1";
|
|
};
|
|
hrefprev60_cfg1 {
|
|
pins = "GPIO21_AB3"; /* DAT31DIR */
|
|
ste,config = <&out_hi>;
|
|
};
|
|
|
|
};
|
|
};
|
|
tc35892 {
|
|
tc35892_hrefprev60_mode: tc35892_hrefprev60 {
|
|
hrefprev60_cfg {
|
|
pins = "GPIO217_AH12";
|
|
ste,config = <&gpio_in_pu>;
|
|
};
|
|
};
|
|
};
|
|
ipgpio {
|
|
ipgpio_hrefprev60_mode: ipgpio_hrefprev60 {
|
|
hrefprev60_mux {
|
|
function = "ipgpio";
|
|
groups = "ipgpio0_c_1", "ipgpio1_c_1";
|
|
};
|
|
hrefprev60_cfg1 {
|
|
pins = "GPIO6_AF6", "GPIO7_AG5";
|
|
ste,config = <&in_pu>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|