![Linus Torvalds](/assets/img/avatar_default.png)
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
613 lines
15 KiB
C
613 lines
15 KiB
C
/*
|
||
* Device driver for the i2c thermostat found on the iBook G4, Albook G4
|
||
*
|
||
* Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt
|
||
*
|
||
* Documentation from
|
||
* http://www.analog.com/UploadedFiles/Data_Sheets/115254175ADT7467_pra.pdf
|
||
* http://www.analog.com/UploadedFiles/Data_Sheets/3686221171167ADT7460_b.pdf
|
||
*
|
||
*/
|
||
|
||
#include <linux/config.h>
|
||
#include <linux/types.h>
|
||
#include <linux/module.h>
|
||
#include <linux/errno.h>
|
||
#include <linux/kernel.h>
|
||
#include <linux/delay.h>
|
||
#include <linux/sched.h>
|
||
#include <linux/i2c.h>
|
||
#include <linux/slab.h>
|
||
#include <linux/init.h>
|
||
#include <linux/spinlock.h>
|
||
#include <linux/smp_lock.h>
|
||
#include <linux/wait.h>
|
||
#include <linux/suspend.h>
|
||
#include <linux/kthread.h>
|
||
#include <linux/moduleparam.h>
|
||
|
||
#include <asm/prom.h>
|
||
#include <asm/machdep.h>
|
||
#include <asm/io.h>
|
||
#include <asm/system.h>
|
||
#include <asm/sections.h>
|
||
#include <asm/of_device.h>
|
||
|
||
#undef DEBUG
|
||
|
||
#define CONFIG_REG 0x40
|
||
#define MANUAL_MASK 0xe0
|
||
#define AUTO_MASK 0x20
|
||
|
||
static u8 TEMP_REG[3] = {0x26, 0x25, 0x27}; /* local, cpu, gpu */
|
||
static u8 LIMIT_REG[3] = {0x6b, 0x6a, 0x6c}; /* local, cpu, gpu */
|
||
static u8 MANUAL_MODE[2] = {0x5c, 0x5d};
|
||
static u8 REM_CONTROL[2] = {0x00, 0x40};
|
||
static u8 FAN_SPEED[2] = {0x28, 0x2a};
|
||
static u8 FAN_SPD_SET[2] = {0x30, 0x31};
|
||
|
||
static u8 default_limits_local[3] = {70, 50, 70}; /* local, cpu, gpu */
|
||
static u8 default_limits_chip[3] = {80, 65, 80}; /* local, cpu, gpu */
|
||
|
||
static int limit_adjust = 0;
|
||
static int fan_speed = -1;
|
||
|
||
MODULE_AUTHOR("Colin Leroy <colin@colino.net>");
|
||
MODULE_DESCRIPTION("Driver for ADT746x thermostat in iBook G4 and "
|
||
"Powerbook G4 Alu");
|
||
MODULE_LICENSE("GPL");
|
||
|
||
module_param(limit_adjust, int, 0644);
|
||
MODULE_PARM_DESC(limit_adjust,"Adjust maximum temperatures (50 cpu, 70 gpu) "
|
||
"by N degrees.");
|
||
|
||
module_param(fan_speed, int, 0644);
|
||
MODULE_PARM_DESC(fan_speed,"Specify starting fan speed (0-255) "
|
||
"(default 64)");
|
||
|
||
struct thermostat {
|
||
struct i2c_client clt;
|
||
u8 temps[3];
|
||
u8 cached_temp[3];
|
||
u8 initial_limits[3];
|
||
u8 limits[3];
|
||
int last_speed[2];
|
||
int last_var[2];
|
||
};
|
||
|
||
static enum {ADT7460, ADT7467} therm_type;
|
||
static int therm_bus, therm_address;
|
||
static struct of_device * of_dev;
|
||
static struct thermostat* thermostat;
|
||
static struct task_struct *thread_therm = NULL;
|
||
|
||
static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
|
||
int busno);
|
||
|
||
static void write_both_fan_speed(struct thermostat *th, int speed);
|
||
static void write_fan_speed(struct thermostat *th, int speed, int fan);
|
||
|
||
static int
|
||
write_reg(struct thermostat* th, int reg, u8 data)
|
||
{
|
||
u8 tmp[2];
|
||
int rc;
|
||
|
||
tmp[0] = reg;
|
||
tmp[1] = data;
|
||
rc = i2c_master_send(&th->clt, (const char *)tmp, 2);
|
||
if (rc < 0)
|
||
return rc;
|
||
if (rc != 2)
|
||
return -ENODEV;
|
||
return 0;
|
||
}
|
||
|
||
static int
|
||
read_reg(struct thermostat* th, int reg)
|
||
{
|
||
u8 reg_addr, data;
|
||
int rc;
|
||
|
||
reg_addr = (u8)reg;
|
||
rc = i2c_master_send(&th->clt, ®_addr, 1);
|
||
if (rc < 0)
|
||
return rc;
|
||
if (rc != 1)
|
||
return -ENODEV;
|
||
rc = i2c_master_recv(&th->clt, (char *)&data, 1);
|
||
if (rc < 0)
|
||
return rc;
|
||
return data;
|
||
}
|
||
|
||
static int
|
||
attach_thermostat(struct i2c_adapter *adapter)
|
||
{
|
||
unsigned long bus_no;
|
||
|
||
if (strncmp(adapter->name, "uni-n", 5))
|
||
return -ENODEV;
|
||
bus_no = simple_strtoul(adapter->name + 6, NULL, 10);
|
||
if (bus_no != therm_bus)
|
||
return -ENODEV;
|
||
return attach_one_thermostat(adapter, therm_address, bus_no);
|
||
}
|
||
|
||
static int
|
||
detach_thermostat(struct i2c_adapter *adapter)
|
||
{
|
||
struct thermostat* th;
|
||
int i;
|
||
|
||
if (thermostat == NULL)
|
||
return 0;
|
||
|
||
th = thermostat;
|
||
|
||
if (thread_therm != NULL) {
|
||
kthread_stop(thread_therm);
|
||
}
|
||
|
||
printk(KERN_INFO "adt746x: Putting max temperatures back from "
|
||
"%d, %d, %d to %d, %d, %d\n",
|
||
th->limits[0], th->limits[1], th->limits[2],
|
||
th->initial_limits[0], th->initial_limits[1],
|
||
th->initial_limits[2]);
|
||
|
||
for (i = 0; i < 3; i++)
|
||
write_reg(th, LIMIT_REG[i], th->initial_limits[i]);
|
||
|
||
write_both_fan_speed(th, -1);
|
||
|
||
i2c_detach_client(&th->clt);
|
||
|
||
thermostat = NULL;
|
||
|
||
kfree(th);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static struct i2c_driver thermostat_driver = {
|
||
.owner = THIS_MODULE,
|
||
.name = "therm_adt746x",
|
||
.flags = I2C_DF_NOTIFY,
|
||
.attach_adapter = attach_thermostat,
|
||
.detach_adapter = detach_thermostat,
|
||
};
|
||
|
||
static int read_fan_speed(struct thermostat *th, u8 addr)
|
||
{
|
||
u8 tmp[2];
|
||
u16 res;
|
||
|
||
/* should start with low byte */
|
||
tmp[1] = read_reg(th, addr);
|
||
tmp[0] = read_reg(th, addr + 1);
|
||
|
||
res = tmp[1] + (tmp[0] << 8);
|
||
/* "a value of 0xffff means that the fan has stopped" */
|
||
return (res == 0xffff ? 0 : (90000*60)/res);
|
||
}
|
||
|
||
static void write_both_fan_speed(struct thermostat *th, int speed)
|
||
{
|
||
write_fan_speed(th, speed, 0);
|
||
if (therm_type == ADT7460)
|
||
write_fan_speed(th, speed, 1);
|
||
}
|
||
|
||
static void write_fan_speed(struct thermostat *th, int speed, int fan)
|
||
{
|
||
u8 manual;
|
||
|
||
if (speed > 0xff)
|
||
speed = 0xff;
|
||
else if (speed < -1)
|
||
speed = 0;
|
||
|
||
if (therm_type == ADT7467 && fan == 1)
|
||
return;
|
||
|
||
if (th->last_speed[fan] != speed) {
|
||
if (speed == -1)
|
||
printk(KERN_DEBUG "adt746x: Setting speed to automatic "
|
||
"for %s fan.\n", fan?"GPU":"CPU");
|
||
else
|
||
printk(KERN_DEBUG "adt746x: Setting speed to %d "
|
||
"for %s fan.\n", speed, fan?"GPU":"CPU");
|
||
} else
|
||
return;
|
||
|
||
if (speed >= 0) {
|
||
manual = read_reg(th, MANUAL_MODE[fan]);
|
||
write_reg(th, MANUAL_MODE[fan], manual|MANUAL_MASK);
|
||
write_reg(th, FAN_SPD_SET[fan], speed);
|
||
} else {
|
||
/* back to automatic */
|
||
if(therm_type == ADT7460) {
|
||
manual = read_reg(th,
|
||
MANUAL_MODE[fan]) & (~MANUAL_MASK);
|
||
|
||
write_reg(th,
|
||
MANUAL_MODE[fan], manual|REM_CONTROL[fan]);
|
||
} else {
|
||
manual = read_reg(th, MANUAL_MODE[fan]);
|
||
write_reg(th, MANUAL_MODE[fan], manual&(~AUTO_MASK));
|
||
}
|
||
}
|
||
|
||
th->last_speed[fan] = speed;
|
||
}
|
||
|
||
static void read_sensors(struct thermostat *th)
|
||
{
|
||
int i = 0;
|
||
|
||
for (i = 0; i < 3; i++)
|
||
th->temps[i] = read_reg(th, TEMP_REG[i]);
|
||
}
|
||
|
||
#ifdef DEBUG
|
||
static void display_stats(struct thermostat *th)
|
||
{
|
||
if (th->temps[0] != th->cached_temp[0]
|
||
|| th->temps[1] != th->cached_temp[1]
|
||
|| th->temps[2] != th->cached_temp[2]) {
|
||
printk(KERN_INFO "adt746x: Temperature infos:"
|
||
" thermostats: %d,%d,%d;"
|
||
" limits: %d,%d,%d;"
|
||
" fan speed: %d RPM\n",
|
||
th->temps[0], th->temps[1], th->temps[2],
|
||
th->limits[0], th->limits[1], th->limits[2],
|
||
read_fan_speed(th, FAN_SPEED[0]));
|
||
}
|
||
th->cached_temp[0] = th->temps[0];
|
||
th->cached_temp[1] = th->temps[1];
|
||
th->cached_temp[2] = th->temps[2];
|
||
}
|
||
#endif
|
||
|
||
static void update_fans_speed (struct thermostat *th)
|
||
{
|
||
int lastvar = 0; /* last variation, for iBook */
|
||
int i = 0;
|
||
|
||
/* we don't care about local sensor, so we start at sensor 1 */
|
||
for (i = 1; i < 3; i++) {
|
||
int started = 0;
|
||
int fan_number = (therm_type == ADT7460 && i == 2);
|
||
int var = th->temps[i] - th->limits[i];
|
||
|
||
if (var > -1) {
|
||
int step = (255 - fan_speed) / 7;
|
||
int new_speed = 0;
|
||
|
||
/* hysteresis : change fan speed only if variation is
|
||
* more than two degrees */
|
||
if (abs(var - th->last_var[fan_number]) < 2)
|
||
continue;
|
||
|
||
started = 1;
|
||
new_speed = fan_speed + ((var-1)*step);
|
||
|
||
if (new_speed < fan_speed)
|
||
new_speed = fan_speed;
|
||
if (new_speed > 255)
|
||
new_speed = 255;
|
||
|
||
printk(KERN_DEBUG "adt746x: setting fans speed to %d "
|
||
"(limit exceeded by %d on %s) \n",
|
||
new_speed, var,
|
||
fan_number?"GPU/pwr":"CPU");
|
||
write_both_fan_speed(th, new_speed);
|
||
th->last_var[fan_number] = var;
|
||
} else if (var < -2) {
|
||
/* don't stop fan if GPU/power is cold and CPU is not
|
||
* so cold (lastvar >= -1) */
|
||
if (i == 2 && lastvar < -1) {
|
||
if (th->last_speed[fan_number] != 0)
|
||
printk(KERN_DEBUG "adt746x: Stopping "
|
||
"fans.\n");
|
||
write_both_fan_speed(th, 0);
|
||
}
|
||
}
|
||
|
||
lastvar = var;
|
||
|
||
if (started)
|
||
return; /* we don't want to re-stop the fan
|
||
* if CPU is heating and GPU/power is not */
|
||
}
|
||
}
|
||
|
||
static int monitor_task(void *arg)
|
||
{
|
||
struct thermostat* th = arg;
|
||
|
||
while(!kthread_should_stop()) {
|
||
if (current->flags & PF_FREEZE)
|
||
refrigerator(PF_FREEZE);
|
||
|
||
msleep_interruptible(2000);
|
||
|
||
#ifndef DEBUG
|
||
if (fan_speed != -1)
|
||
read_sensors(th);
|
||
#else
|
||
read_sensors(th);
|
||
#endif
|
||
|
||
if (fan_speed != -1)
|
||
update_fans_speed(th);
|
||
|
||
#ifdef DEBUG
|
||
display_stats(th);
|
||
#endif
|
||
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static void set_limit(struct thermostat *th, int i)
|
||
{
|
||
/* Set CPU limit higher to avoid powerdowns */
|
||
th->limits[i] = default_limits_chip[i] + limit_adjust;
|
||
write_reg(th, LIMIT_REG[i], th->limits[i]);
|
||
|
||
/* set our limits to normal */
|
||
th->limits[i] = default_limits_local[i] + limit_adjust;
|
||
}
|
||
|
||
static int attach_one_thermostat(struct i2c_adapter *adapter, int addr,
|
||
int busno)
|
||
{
|
||
struct thermostat* th;
|
||
int rc;
|
||
int i;
|
||
|
||
if (thermostat)
|
||
return 0;
|
||
|
||
th = (struct thermostat *)
|
||
kmalloc(sizeof(struct thermostat), GFP_KERNEL);
|
||
|
||
if (!th)
|
||
return -ENOMEM;
|
||
|
||
memset(th, 0, sizeof(*th));
|
||
th->clt.addr = addr;
|
||
th->clt.adapter = adapter;
|
||
th->clt.driver = &thermostat_driver;
|
||
strcpy(th->clt.name, "thermostat");
|
||
|
||
rc = read_reg(th, 0);
|
||
if (rc < 0) {
|
||
printk(KERN_ERR "adt746x: Thermostat failed to read config "
|
||
"from bus %d !\n",
|
||
busno);
|
||
kfree(th);
|
||
return -ENODEV;
|
||
}
|
||
|
||
/* force manual control to start the fan quieter */
|
||
if (fan_speed == -1)
|
||
fan_speed = 64;
|
||
|
||
if(therm_type == ADT7460) {
|
||
printk(KERN_INFO "adt746x: ADT7460 initializing\n");
|
||
/* The 7460 needs to be started explicitly */
|
||
write_reg(th, CONFIG_REG, 1);
|
||
} else
|
||
printk(KERN_INFO "adt746x: ADT7467 initializing\n");
|
||
|
||
for (i = 0; i < 3; i++) {
|
||
th->initial_limits[i] = read_reg(th, LIMIT_REG[i]);
|
||
set_limit(th, i);
|
||
}
|
||
|
||
printk(KERN_INFO "adt746x: Lowering max temperatures from %d, %d, %d"
|
||
" to %d, %d, %d\n",
|
||
th->initial_limits[0], th->initial_limits[1],
|
||
th->initial_limits[2], th->limits[0], th->limits[1],
|
||
th->limits[2]);
|
||
|
||
thermostat = th;
|
||
|
||
if (i2c_attach_client(&th->clt)) {
|
||
printk(KERN_INFO "adt746x: Thermostat failed to attach "
|
||
"client !\n");
|
||
thermostat = NULL;
|
||
kfree(th);
|
||
return -ENODEV;
|
||
}
|
||
|
||
/* be sure to really write fan speed the first time */
|
||
th->last_speed[0] = -2;
|
||
th->last_speed[1] = -2;
|
||
th->last_var[0] = -80;
|
||
th->last_var[1] = -80;
|
||
|
||
if (fan_speed != -1) {
|
||
/* manual mode, stop fans */
|
||
write_both_fan_speed(th, 0);
|
||
} else {
|
||
/* automatic mode */
|
||
write_both_fan_speed(th, -1);
|
||
}
|
||
|
||
thread_therm = kthread_run(monitor_task, th, "kfand");
|
||
|
||
if (thread_therm == ERR_PTR(-ENOMEM)) {
|
||
printk(KERN_INFO "adt746x: Kthread creation failed\n");
|
||
thread_therm = NULL;
|
||
return -ENOMEM;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
/*
|
||
* Now, unfortunately, sysfs doesn't give us a nice void * we could
|
||
* pass around to the attribute functions, so we don't really have
|
||
* choice but implement a bunch of them...
|
||
*
|
||
*/
|
||
#define BUILD_SHOW_FUNC_INT(name, data) \
|
||
static ssize_t show_##name(struct device *dev, char *buf) \
|
||
{ \
|
||
return sprintf(buf, "%d\n", data); \
|
||
}
|
||
|
||
#define BUILD_SHOW_FUNC_FAN(name, data) \
|
||
static ssize_t show_##name(struct device *dev, char *buf) \
|
||
{ \
|
||
return sprintf(buf, "%d (%d rpm)\n", \
|
||
thermostat->last_speed[data], \
|
||
read_fan_speed(thermostat, FAN_SPEED[data]) \
|
||
); \
|
||
}
|
||
|
||
#define BUILD_STORE_FUNC_DEG(name, data) \
|
||
static ssize_t store_##name(struct device *dev, const char *buf, size_t n) \
|
||
{ \
|
||
int val; \
|
||
int i; \
|
||
val = simple_strtol(buf, NULL, 10); \
|
||
printk(KERN_INFO "Adjusting limits by %d<>C\n", val); \
|
||
limit_adjust = val; \
|
||
for (i=0; i < 3; i++) \
|
||
set_limit(thermostat, i); \
|
||
return n; \
|
||
}
|
||
|
||
#define BUILD_STORE_FUNC_INT(name, data) \
|
||
static ssize_t store_##name(struct device *dev, const char *buf, size_t n) \
|
||
{ \
|
||
u32 val; \
|
||
val = simple_strtoul(buf, NULL, 10); \
|
||
if (val < 0 || val > 255) \
|
||
return -EINVAL; \
|
||
printk(KERN_INFO "Setting specified fan speed to %d\n", val); \
|
||
data = val; \
|
||
return n; \
|
||
}
|
||
|
||
BUILD_SHOW_FUNC_INT(cpu_temperature, (read_reg(thermostat, TEMP_REG[1])))
|
||
BUILD_SHOW_FUNC_INT(gpu_temperature, (read_reg(thermostat, TEMP_REG[2])))
|
||
BUILD_SHOW_FUNC_INT(cpu_limit, thermostat->limits[1])
|
||
BUILD_SHOW_FUNC_INT(gpu_limit, thermostat->limits[2])
|
||
|
||
BUILD_SHOW_FUNC_INT(specified_fan_speed, fan_speed)
|
||
BUILD_SHOW_FUNC_FAN(cpu_fan_speed, 0)
|
||
BUILD_SHOW_FUNC_FAN(gpu_fan_speed, 1)
|
||
|
||
BUILD_STORE_FUNC_INT(specified_fan_speed,fan_speed)
|
||
BUILD_SHOW_FUNC_INT(limit_adjust, limit_adjust)
|
||
BUILD_STORE_FUNC_DEG(limit_adjust, thermostat)
|
||
|
||
static DEVICE_ATTR(cpu_temperature, S_IRUGO,
|
||
show_cpu_temperature,NULL);
|
||
static DEVICE_ATTR(gpu_temperature, S_IRUGO,
|
||
show_gpu_temperature,NULL);
|
||
static DEVICE_ATTR(cpu_limit, S_IRUGO,
|
||
show_cpu_limit, NULL);
|
||
static DEVICE_ATTR(gpu_limit, S_IRUGO,
|
||
show_gpu_limit, NULL);
|
||
|
||
static DEVICE_ATTR(specified_fan_speed, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH,
|
||
show_specified_fan_speed,store_specified_fan_speed);
|
||
|
||
static DEVICE_ATTR(cpu_fan_speed, S_IRUGO,
|
||
show_cpu_fan_speed, NULL);
|
||
static DEVICE_ATTR(gpu_fan_speed, S_IRUGO,
|
||
show_gpu_fan_speed, NULL);
|
||
|
||
static DEVICE_ATTR(limit_adjust, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH,
|
||
show_limit_adjust, store_limit_adjust);
|
||
|
||
|
||
static int __init
|
||
thermostat_init(void)
|
||
{
|
||
struct device_node* np;
|
||
u32 *prop;
|
||
|
||
np = of_find_node_by_name(NULL, "fan");
|
||
if (!np)
|
||
return -ENODEV;
|
||
if (device_is_compatible(np, "adt7460"))
|
||
therm_type = ADT7460;
|
||
else if (device_is_compatible(np, "adt7467"))
|
||
therm_type = ADT7467;
|
||
else
|
||
return -ENODEV;
|
||
|
||
prop = (u32 *)get_property(np, "reg", NULL);
|
||
if (!prop)
|
||
return -ENODEV;
|
||
|
||
/* look for bus either by path or using "reg" */
|
||
if (strstr(np->full_name, "/i2c-bus@") != NULL) {
|
||
const char *tmp_bus = (strstr(np->full_name, "/i2c-bus@") + 9);
|
||
therm_bus = tmp_bus[0]-'0';
|
||
} else {
|
||
therm_bus = ((*prop) >> 8) & 0x0f;
|
||
}
|
||
|
||
therm_address = ((*prop) & 0xff) >> 1;
|
||
|
||
printk(KERN_INFO "adt746x: Thermostat bus: %d, address: 0x%02x, "
|
||
"limit_adjust: %d, fan_speed: %d\n",
|
||
therm_bus, therm_address, limit_adjust, fan_speed);
|
||
|
||
of_dev = of_platform_device_create(np, "temperatures");
|
||
|
||
if (of_dev == NULL) {
|
||
printk(KERN_ERR "Can't register temperatures device !\n");
|
||
return -ENODEV;
|
||
}
|
||
|
||
device_create_file(&of_dev->dev, &dev_attr_cpu_temperature);
|
||
device_create_file(&of_dev->dev, &dev_attr_gpu_temperature);
|
||
device_create_file(&of_dev->dev, &dev_attr_cpu_limit);
|
||
device_create_file(&of_dev->dev, &dev_attr_gpu_limit);
|
||
device_create_file(&of_dev->dev, &dev_attr_limit_adjust);
|
||
device_create_file(&of_dev->dev, &dev_attr_specified_fan_speed);
|
||
device_create_file(&of_dev->dev, &dev_attr_cpu_fan_speed);
|
||
if(therm_type == ADT7460)
|
||
device_create_file(&of_dev->dev, &dev_attr_gpu_fan_speed);
|
||
|
||
#ifndef CONFIG_I2C_KEYWEST
|
||
request_module("i2c-keywest");
|
||
#endif
|
||
|
||
return i2c_add_driver(&thermostat_driver);
|
||
}
|
||
|
||
static void __exit
|
||
thermostat_exit(void)
|
||
{
|
||
if (of_dev) {
|
||
device_remove_file(&of_dev->dev, &dev_attr_cpu_temperature);
|
||
device_remove_file(&of_dev->dev, &dev_attr_gpu_temperature);
|
||
device_remove_file(&of_dev->dev, &dev_attr_cpu_limit);
|
||
device_remove_file(&of_dev->dev, &dev_attr_gpu_limit);
|
||
device_remove_file(&of_dev->dev, &dev_attr_limit_adjust);
|
||
device_remove_file(&of_dev->dev, &dev_attr_specified_fan_speed);
|
||
device_remove_file(&of_dev->dev, &dev_attr_cpu_fan_speed);
|
||
|
||
if(therm_type == ADT7460)
|
||
device_remove_file(&of_dev->dev,
|
||
&dev_attr_gpu_fan_speed);
|
||
|
||
of_device_unregister(of_dev);
|
||
}
|
||
i2c_del_driver(&thermostat_driver);
|
||
}
|
||
|
||
module_init(thermostat_init);
|
||
module_exit(thermostat_exit);
|