![Pavel Machek](/assets/img/avatar_default.png)
This fixes remaining u32 vs. pm_message_t confusions in -rc2-mm3. [There are usb changes, too; they went to Greg on his request.] Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
3148 lines
75 KiB
C
3148 lines
75 KiB
C
/*
|
|
* Device driver for the via-pmu on Apple Powermacs.
|
|
*
|
|
* The VIA (versatile interface adapter) interfaces to the PMU,
|
|
* a 6805 microprocessor core whose primary function is to control
|
|
* battery charging and system power on the PowerBook 3400 and 2400.
|
|
* The PMU also controls the ADB (Apple Desktop Bus) which connects
|
|
* to the keyboard and mouse, as well as the non-volatile RAM
|
|
* and the RTC (real time clock) chip.
|
|
*
|
|
* Copyright (C) 1998 Paul Mackerras and Fabio Riccardi.
|
|
* Copyright (C) 2001-2002 Benjamin Herrenschmidt
|
|
*
|
|
* THIS DRIVER IS BECOMING A TOTAL MESS !
|
|
* - Cleanup atomically disabling reply to PMU events after
|
|
* a sleep or a freq. switch
|
|
* - Move sleep code out of here to pmac_pm, merge into new
|
|
* common PM infrastructure
|
|
* - Move backlight code out as well
|
|
* - Save/Restore PCI space properly
|
|
*
|
|
*/
|
|
#include <stdarg.h>
|
|
#include <linux/config.h>
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/miscdevice.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/adb.h>
|
|
#include <linux/pmu.h>
|
|
#include <linux/cuda.h>
|
|
#include <linux/smp_lock.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <linux/sysdev.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/syscalls.h>
|
|
#include <linux/cpu.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/io.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/system.h>
|
|
#include <asm/sections.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/pmac_feature.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/mmu_context.h>
|
|
#include <asm/cputable.h>
|
|
#include <asm/time.h>
|
|
#ifdef CONFIG_PMAC_BACKLIGHT
|
|
#include <asm/backlight.h>
|
|
#endif
|
|
|
|
/* Some compile options */
|
|
#undef SUSPEND_USES_PMU
|
|
#define DEBUG_SLEEP
|
|
#undef HACKED_PCI_SAVE
|
|
|
|
/* Misc minor number allocated for /dev/pmu */
|
|
#define PMU_MINOR 154
|
|
|
|
/* How many iterations between battery polls */
|
|
#define BATTERY_POLLING_COUNT 2
|
|
|
|
static volatile unsigned char __iomem *via;
|
|
|
|
/* VIA registers - spaced 0x200 bytes apart */
|
|
#define RS 0x200 /* skip between registers */
|
|
#define B 0 /* B-side data */
|
|
#define A RS /* A-side data */
|
|
#define DIRB (2*RS) /* B-side direction (1=output) */
|
|
#define DIRA (3*RS) /* A-side direction (1=output) */
|
|
#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */
|
|
#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */
|
|
#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */
|
|
#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */
|
|
#define T2CL (8*RS) /* Timer 2 ctr/latch (low 8 bits) */
|
|
#define T2CH (9*RS) /* Timer 2 counter (high 8 bits) */
|
|
#define SR (10*RS) /* Shift register */
|
|
#define ACR (11*RS) /* Auxiliary control register */
|
|
#define PCR (12*RS) /* Peripheral control register */
|
|
#define IFR (13*RS) /* Interrupt flag register */
|
|
#define IER (14*RS) /* Interrupt enable register */
|
|
#define ANH (15*RS) /* A-side data, no handshake */
|
|
|
|
/* Bits in B data register: both active low */
|
|
#define TACK 0x08 /* Transfer acknowledge (input) */
|
|
#define TREQ 0x10 /* Transfer request (output) */
|
|
|
|
/* Bits in ACR */
|
|
#define SR_CTRL 0x1c /* Shift register control bits */
|
|
#define SR_EXT 0x0c /* Shift on external clock */
|
|
#define SR_OUT 0x10 /* Shift out if 1 */
|
|
|
|
/* Bits in IFR and IER */
|
|
#define IER_SET 0x80 /* set bits in IER */
|
|
#define IER_CLR 0 /* clear bits in IER */
|
|
#define SR_INT 0x04 /* Shift register full/empty */
|
|
#define CB2_INT 0x08
|
|
#define CB1_INT 0x10 /* transition on CB1 input */
|
|
|
|
static volatile enum pmu_state {
|
|
idle,
|
|
sending,
|
|
intack,
|
|
reading,
|
|
reading_intr,
|
|
locked,
|
|
} pmu_state;
|
|
|
|
static volatile enum int_data_state {
|
|
int_data_empty,
|
|
int_data_fill,
|
|
int_data_ready,
|
|
int_data_flush
|
|
} int_data_state[2] = { int_data_empty, int_data_empty };
|
|
|
|
static struct adb_request *current_req;
|
|
static struct adb_request *last_req;
|
|
static struct adb_request *req_awaiting_reply;
|
|
static unsigned char interrupt_data[2][32];
|
|
static int interrupt_data_len[2];
|
|
static int int_data_last;
|
|
static unsigned char *reply_ptr;
|
|
static int data_index;
|
|
static int data_len;
|
|
static volatile int adb_int_pending;
|
|
static volatile int disable_poll;
|
|
static struct adb_request bright_req_1, bright_req_2;
|
|
static struct device_node *vias;
|
|
static int pmu_kind = PMU_UNKNOWN;
|
|
static int pmu_fully_inited = 0;
|
|
static int pmu_has_adb;
|
|
static unsigned char __iomem *gpio_reg = NULL;
|
|
static int gpio_irq = -1;
|
|
static int gpio_irq_enabled = -1;
|
|
static volatile int pmu_suspended = 0;
|
|
static spinlock_t pmu_lock;
|
|
static u8 pmu_intr_mask;
|
|
static int pmu_version;
|
|
static int drop_interrupts;
|
|
#ifdef CONFIG_PMAC_PBOOK
|
|
static int option_lid_wakeup = 1;
|
|
static int sleep_in_progress;
|
|
#endif /* CONFIG_PMAC_PBOOK */
|
|
static unsigned long async_req_locks;
|
|
static unsigned int pmu_irq_stats[11];
|
|
|
|
static struct proc_dir_entry *proc_pmu_root;
|
|
static struct proc_dir_entry *proc_pmu_info;
|
|
static struct proc_dir_entry *proc_pmu_irqstats;
|
|
static struct proc_dir_entry *proc_pmu_options;
|
|
static int option_server_mode;
|
|
|
|
#ifdef CONFIG_PMAC_PBOOK
|
|
int pmu_battery_count;
|
|
int pmu_cur_battery;
|
|
unsigned int pmu_power_flags;
|
|
struct pmu_battery_info pmu_batteries[PMU_MAX_BATTERIES];
|
|
static int query_batt_timer = BATTERY_POLLING_COUNT;
|
|
static struct adb_request batt_req;
|
|
static struct proc_dir_entry *proc_pmu_batt[PMU_MAX_BATTERIES];
|
|
#endif /* CONFIG_PMAC_PBOOK */
|
|
|
|
#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
|
|
extern int disable_kernel_backlight;
|
|
#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */
|
|
|
|
int __fake_sleep;
|
|
int asleep;
|
|
struct notifier_block *sleep_notifier_list;
|
|
|
|
#ifdef CONFIG_ADB
|
|
static int adb_dev_map = 0;
|
|
static int pmu_adb_flags;
|
|
|
|
static int pmu_probe(void);
|
|
static int pmu_init(void);
|
|
static int pmu_send_request(struct adb_request *req, int sync);
|
|
static int pmu_adb_autopoll(int devs);
|
|
static int pmu_adb_reset_bus(void);
|
|
#endif /* CONFIG_ADB */
|
|
|
|
static int init_pmu(void);
|
|
static int pmu_queue_request(struct adb_request *req);
|
|
static void pmu_start(void);
|
|
static irqreturn_t via_pmu_interrupt(int irq, void *arg, struct pt_regs *regs);
|
|
static irqreturn_t gpio1_interrupt(int irq, void *arg, struct pt_regs *regs);
|
|
static int proc_get_info(char *page, char **start, off_t off,
|
|
int count, int *eof, void *data);
|
|
static int proc_get_irqstats(char *page, char **start, off_t off,
|
|
int count, int *eof, void *data);
|
|
#ifdef CONFIG_PMAC_BACKLIGHT
|
|
static int pmu_set_backlight_level(int level, void* data);
|
|
static int pmu_set_backlight_enable(int on, int level, void* data);
|
|
#endif /* CONFIG_PMAC_BACKLIGHT */
|
|
#ifdef CONFIG_PMAC_PBOOK
|
|
static void pmu_pass_intr(unsigned char *data, int len);
|
|
static int proc_get_batt(char *page, char **start, off_t off,
|
|
int count, int *eof, void *data);
|
|
#endif /* CONFIG_PMAC_PBOOK */
|
|
static int proc_read_options(char *page, char **start, off_t off,
|
|
int count, int *eof, void *data);
|
|
static int proc_write_options(struct file *file, const char __user *buffer,
|
|
unsigned long count, void *data);
|
|
|
|
#ifdef CONFIG_ADB
|
|
struct adb_driver via_pmu_driver = {
|
|
"PMU",
|
|
pmu_probe,
|
|
pmu_init,
|
|
pmu_send_request,
|
|
pmu_adb_autopoll,
|
|
pmu_poll_adb,
|
|
pmu_adb_reset_bus
|
|
};
|
|
#endif /* CONFIG_ADB */
|
|
|
|
extern void low_sleep_handler(void);
|
|
extern void enable_kernel_altivec(void);
|
|
extern void enable_kernel_fp(void);
|
|
|
|
#ifdef DEBUG_SLEEP
|
|
int pmu_polled_request(struct adb_request *req);
|
|
int pmu_wink(struct adb_request *req);
|
|
#endif
|
|
|
|
/*
|
|
* This table indicates for each PMU opcode:
|
|
* - the number of data bytes to be sent with the command, or -1
|
|
* if a length byte should be sent,
|
|
* - the number of response bytes which the PMU will return, or
|
|
* -1 if it will send a length byte.
|
|
*/
|
|
static const s8 pmu_data_len[256][2] __openfirmwaredata = {
|
|
/* 0 1 2 3 4 5 6 7 */
|
|
/*00*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
|
|
/*08*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
|
|
/*10*/ { 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
|
|
/*18*/ { 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0, 0},
|
|
/*20*/ {-1, 0},{ 0, 0},{ 2, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},
|
|
/*28*/ { 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{ 0,-1},
|
|
/*30*/ { 4, 0},{20, 0},{-1, 0},{ 3, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
|
|
/*38*/ { 0, 4},{ 0,20},{ 2,-1},{ 2, 1},{ 3,-1},{-1,-1},{-1,-1},{ 4, 0},
|
|
/*40*/ { 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
|
|
/*48*/ { 0, 1},{ 0, 1},{-1,-1},{ 1, 0},{ 1, 0},{-1,-1},{-1,-1},{-1,-1},
|
|
/*50*/ { 1, 0},{ 0, 0},{ 2, 0},{ 2, 0},{-1, 0},{ 1, 0},{ 3, 0},{ 1, 0},
|
|
/*58*/ { 0, 1},{ 1, 0},{ 0, 2},{ 0, 2},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},
|
|
/*60*/ { 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
|
|
/*68*/ { 0, 3},{ 0, 3},{ 0, 2},{ 0, 8},{ 0,-1},{ 0,-1},{-1,-1},{-1,-1},
|
|
/*70*/ { 1, 0},{ 1, 0},{ 1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
|
|
/*78*/ { 0,-1},{ 0,-1},{-1,-1},{-1,-1},{-1,-1},{ 5, 1},{ 4, 1},{ 4, 1},
|
|
/*80*/ { 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
|
|
/*88*/ { 0, 5},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
|
|
/*90*/ { 1, 0},{ 2, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
|
|
/*98*/ { 0, 1},{ 0, 1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
|
|
/*a0*/ { 2, 0},{ 2, 0},{ 2, 0},{ 4, 0},{-1, 0},{ 0, 0},{-1, 0},{-1, 0},
|
|
/*a8*/ { 1, 1},{ 1, 0},{ 3, 0},{ 2, 0},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
|
|
/*b0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
|
|
/*b8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
|
|
/*c0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
|
|
/*c8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
|
|
/*d0*/ { 0, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
|
|
/*d8*/ { 1, 1},{ 1, 1},{-1,-1},{-1,-1},{ 0, 1},{ 0,-1},{-1,-1},{-1,-1},
|
|
/*e0*/ {-1, 0},{ 4, 0},{ 0, 1},{-1, 0},{-1, 0},{ 4, 0},{-1, 0},{-1, 0},
|
|
/*e8*/ { 3,-1},{-1,-1},{ 0, 1},{-1,-1},{ 0,-1},{-1,-1},{-1,-1},{ 0, 0},
|
|
/*f0*/ {-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},{-1, 0},
|
|
/*f8*/ {-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},{-1,-1},
|
|
};
|
|
|
|
static char *pbook_type[] = {
|
|
"Unknown PowerBook",
|
|
"PowerBook 2400/3400/3500(G3)",
|
|
"PowerBook G3 Series",
|
|
"1999 PowerBook G3",
|
|
"Core99"
|
|
};
|
|
|
|
#ifdef CONFIG_PMAC_BACKLIGHT
|
|
static struct backlight_controller pmu_backlight_controller = {
|
|
pmu_set_backlight_enable,
|
|
pmu_set_backlight_level
|
|
};
|
|
#endif /* CONFIG_PMAC_BACKLIGHT */
|
|
|
|
int __openfirmware
|
|
find_via_pmu(void)
|
|
{
|
|
if (via != 0)
|
|
return 1;
|
|
vias = find_devices("via-pmu");
|
|
if (vias == 0)
|
|
return 0;
|
|
if (vias->next != 0)
|
|
printk(KERN_WARNING "Warning: only using 1st via-pmu\n");
|
|
|
|
if (vias->n_addrs < 1 || vias->n_intrs < 1) {
|
|
printk(KERN_ERR "via-pmu: %d addresses, %d interrupts!\n",
|
|
vias->n_addrs, vias->n_intrs);
|
|
if (vias->n_addrs < 1 || vias->n_intrs < 1)
|
|
return 0;
|
|
}
|
|
|
|
spin_lock_init(&pmu_lock);
|
|
|
|
pmu_has_adb = 1;
|
|
|
|
pmu_intr_mask = PMU_INT_PCEJECT |
|
|
PMU_INT_SNDBRT |
|
|
PMU_INT_ADB |
|
|
PMU_INT_TICK;
|
|
|
|
if (vias->parent->name && ((strcmp(vias->parent->name, "ohare") == 0)
|
|
|| device_is_compatible(vias->parent, "ohare")))
|
|
pmu_kind = PMU_OHARE_BASED;
|
|
else if (device_is_compatible(vias->parent, "paddington"))
|
|
pmu_kind = PMU_PADDINGTON_BASED;
|
|
else if (device_is_compatible(vias->parent, "heathrow"))
|
|
pmu_kind = PMU_HEATHROW_BASED;
|
|
else if (device_is_compatible(vias->parent, "Keylargo")
|
|
|| device_is_compatible(vias->parent, "K2-Keylargo")) {
|
|
struct device_node *gpio, *gpiop;
|
|
|
|
pmu_kind = PMU_KEYLARGO_BASED;
|
|
pmu_has_adb = (find_type_devices("adb") != NULL);
|
|
pmu_intr_mask = PMU_INT_PCEJECT |
|
|
PMU_INT_SNDBRT |
|
|
PMU_INT_ADB |
|
|
PMU_INT_TICK |
|
|
PMU_INT_ENVIRONMENT;
|
|
|
|
gpiop = find_devices("gpio");
|
|
if (gpiop && gpiop->n_addrs) {
|
|
gpio_reg = ioremap(gpiop->addrs->address, 0x10);
|
|
gpio = find_devices("extint-gpio1");
|
|
if (gpio == NULL)
|
|
gpio = find_devices("pmu-interrupt");
|
|
if (gpio && gpio->parent == gpiop && gpio->n_intrs)
|
|
gpio_irq = gpio->intrs[0].line;
|
|
}
|
|
} else
|
|
pmu_kind = PMU_UNKNOWN;
|
|
|
|
via = ioremap(vias->addrs->address, 0x2000);
|
|
|
|
out_8(&via[IER], IER_CLR | 0x7f); /* disable all intrs */
|
|
out_8(&via[IFR], 0x7f); /* clear IFR */
|
|
|
|
pmu_state = idle;
|
|
|
|
if (!init_pmu()) {
|
|
via = NULL;
|
|
return 0;
|
|
}
|
|
|
|
printk(KERN_INFO "PMU driver %d initialized for %s, firmware: %02x\n",
|
|
PMU_DRIVER_VERSION, pbook_type[pmu_kind], pmu_version);
|
|
|
|
sys_ctrler = SYS_CTRLER_PMU;
|
|
|
|
return 1;
|
|
}
|
|
|
|
#ifdef CONFIG_ADB
|
|
static int __openfirmware
|
|
pmu_probe(void)
|
|
{
|
|
return vias == NULL? -ENODEV: 0;
|
|
}
|
|
|
|
static int __init
|
|
pmu_init(void)
|
|
{
|
|
if (vias == NULL)
|
|
return -ENODEV;
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_ADB */
|
|
|
|
/*
|
|
* We can't wait until pmu_init gets called, that happens too late.
|
|
* It happens after IDE and SCSI initialization, which can take a few
|
|
* seconds, and by that time the PMU could have given up on us and
|
|
* turned us off.
|
|
* Thus this is called with arch_initcall rather than device_initcall.
|
|
*/
|
|
static int __init via_pmu_start(void)
|
|
{
|
|
if (vias == NULL)
|
|
return -ENODEV;
|
|
|
|
bright_req_1.complete = 1;
|
|
bright_req_2.complete = 1;
|
|
#ifdef CONFIG_PMAC_PBOOK
|
|
batt_req.complete = 1;
|
|
#endif
|
|
|
|
if (request_irq(vias->intrs[0].line, via_pmu_interrupt, 0, "VIA-PMU",
|
|
(void *)0)) {
|
|
printk(KERN_ERR "VIA-PMU: can't get irq %d\n",
|
|
vias->intrs[0].line);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
if (pmu_kind == PMU_KEYLARGO_BASED && gpio_irq != -1) {
|
|
if (request_irq(gpio_irq, gpio1_interrupt, 0, "GPIO1 ADB", (void *)0))
|
|
printk(KERN_ERR "pmu: can't get irq %d (GPIO1)\n", gpio_irq);
|
|
gpio_irq_enabled = 1;
|
|
}
|
|
|
|
/* Enable interrupts */
|
|
out_8(&via[IER], IER_SET | SR_INT | CB1_INT);
|
|
|
|
pmu_fully_inited = 1;
|
|
|
|
/* Make sure PMU settle down before continuing. This is _very_ important
|
|
* since the IDE probe may shut interrupts down for quite a bit of time. If
|
|
* a PMU communication is pending while this happens, the PMU may timeout
|
|
* Not that on Core99 machines, the PMU keeps sending us environement
|
|
* messages, we should find a way to either fix IDE or make it call
|
|
* pmu_suspend() before masking interrupts. This can also happens while
|
|
* scolling with some fbdevs.
|
|
*/
|
|
do {
|
|
pmu_poll();
|
|
} while (pmu_state != idle);
|
|
|
|
return 0;
|
|
}
|
|
|
|
arch_initcall(via_pmu_start);
|
|
|
|
/*
|
|
* This has to be done after pci_init, which is a subsys_initcall.
|
|
*/
|
|
static int __init via_pmu_dev_init(void)
|
|
{
|
|
if (vias == NULL)
|
|
return -ENODEV;
|
|
|
|
#ifndef CONFIG_PPC64
|
|
request_OF_resource(vias, 0, NULL);
|
|
#endif
|
|
#ifdef CONFIG_PMAC_BACKLIGHT
|
|
/* Enable backlight */
|
|
register_backlight_controller(&pmu_backlight_controller, NULL, "pmu");
|
|
#endif /* CONFIG_PMAC_BACKLIGHT */
|
|
|
|
#ifdef CONFIG_PMAC_PBOOK
|
|
if (machine_is_compatible("AAPL,3400/2400") ||
|
|
machine_is_compatible("AAPL,3500")) {
|
|
int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
|
|
NULL, PMAC_MB_INFO_MODEL, 0);
|
|
pmu_battery_count = 1;
|
|
if (mb == PMAC_TYPE_COMET)
|
|
pmu_batteries[0].flags |= PMU_BATT_TYPE_COMET;
|
|
else
|
|
pmu_batteries[0].flags |= PMU_BATT_TYPE_HOOPER;
|
|
} else if (machine_is_compatible("AAPL,PowerBook1998") ||
|
|
machine_is_compatible("PowerBook1,1")) {
|
|
pmu_battery_count = 2;
|
|
pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART;
|
|
pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
|
|
} else {
|
|
struct device_node* prim = find_devices("power-mgt");
|
|
u32 *prim_info = NULL;
|
|
if (prim)
|
|
prim_info = (u32 *)get_property(prim, "prim-info", NULL);
|
|
if (prim_info) {
|
|
/* Other stuffs here yet unknown */
|
|
pmu_battery_count = (prim_info[6] >> 16) & 0xff;
|
|
pmu_batteries[0].flags |= PMU_BATT_TYPE_SMART;
|
|
if (pmu_battery_count > 1)
|
|
pmu_batteries[1].flags |= PMU_BATT_TYPE_SMART;
|
|
}
|
|
}
|
|
#endif /* CONFIG_PMAC_PBOOK */
|
|
/* Create /proc/pmu */
|
|
proc_pmu_root = proc_mkdir("pmu", NULL);
|
|
if (proc_pmu_root) {
|
|
#ifdef CONFIG_PMAC_PBOOK
|
|
int i;
|
|
|
|
for (i=0; i<pmu_battery_count; i++) {
|
|
char title[16];
|
|
sprintf(title, "battery_%d", i);
|
|
proc_pmu_batt[i] = create_proc_read_entry(title, 0, proc_pmu_root,
|
|
proc_get_batt, (void *)i);
|
|
}
|
|
#endif /* CONFIG_PMAC_PBOOK */
|
|
|
|
proc_pmu_info = create_proc_read_entry("info", 0, proc_pmu_root,
|
|
proc_get_info, NULL);
|
|
proc_pmu_irqstats = create_proc_read_entry("interrupts", 0, proc_pmu_root,
|
|
proc_get_irqstats, NULL);
|
|
proc_pmu_options = create_proc_entry("options", 0600, proc_pmu_root);
|
|
if (proc_pmu_options) {
|
|
proc_pmu_options->nlink = 1;
|
|
proc_pmu_options->read_proc = proc_read_options;
|
|
proc_pmu_options->write_proc = proc_write_options;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
device_initcall(via_pmu_dev_init);
|
|
|
|
static int __openfirmware
|
|
init_pmu(void)
|
|
{
|
|
int timeout;
|
|
struct adb_request req;
|
|
|
|
out_8(&via[B], via[B] | TREQ); /* negate TREQ */
|
|
out_8(&via[DIRB], (via[DIRB] | TREQ) & ~TACK); /* TACK in, TREQ out */
|
|
|
|
pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
|
|
timeout = 100000;
|
|
while (!req.complete) {
|
|
if (--timeout < 0) {
|
|
printk(KERN_ERR "init_pmu: no response from PMU\n");
|
|
return 0;
|
|
}
|
|
udelay(10);
|
|
pmu_poll();
|
|
}
|
|
|
|
/* ack all pending interrupts */
|
|
timeout = 100000;
|
|
interrupt_data[0][0] = 1;
|
|
while (interrupt_data[0][0] || pmu_state != idle) {
|
|
if (--timeout < 0) {
|
|
printk(KERN_ERR "init_pmu: timed out acking intrs\n");
|
|
return 0;
|
|
}
|
|
if (pmu_state == idle)
|
|
adb_int_pending = 1;
|
|
via_pmu_interrupt(0, NULL, NULL);
|
|
udelay(10);
|
|
}
|
|
|
|
/* Tell PMU we are ready. */
|
|
if (pmu_kind == PMU_KEYLARGO_BASED) {
|
|
pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
|
|
while (!req.complete)
|
|
pmu_poll();
|
|
}
|
|
|
|
/* Read PMU version */
|
|
pmu_request(&req, NULL, 1, PMU_GET_VERSION);
|
|
pmu_wait_complete(&req);
|
|
if (req.reply_len > 0)
|
|
pmu_version = req.reply[0];
|
|
|
|
/* Read server mode setting */
|
|
if (pmu_kind == PMU_KEYLARGO_BASED) {
|
|
pmu_request(&req, NULL, 2, PMU_POWER_EVENTS,
|
|
PMU_PWR_GET_POWERUP_EVENTS);
|
|
pmu_wait_complete(&req);
|
|
if (req.reply_len == 2) {
|
|
if (req.reply[1] & PMU_PWR_WAKEUP_AC_INSERT)
|
|
option_server_mode = 1;
|
|
printk(KERN_INFO "via-pmu: Server Mode is %s\n",
|
|
option_server_mode ? "enabled" : "disabled");
|
|
}
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
int
|
|
pmu_get_model(void)
|
|
{
|
|
return pmu_kind;
|
|
}
|
|
|
|
#ifndef CONFIG_PPC64
|
|
static inline void wakeup_decrementer(void)
|
|
{
|
|
set_dec(tb_ticks_per_jiffy);
|
|
/* No currently-supported powerbook has a 601,
|
|
* so use get_tbl, not native
|
|
*/
|
|
last_jiffy_stamp(0) = tb_last_stamp = get_tbl();
|
|
}
|
|
#endif
|
|
|
|
static void pmu_set_server_mode(int server_mode)
|
|
{
|
|
struct adb_request req;
|
|
|
|
if (pmu_kind != PMU_KEYLARGO_BASED)
|
|
return;
|
|
|
|
option_server_mode = server_mode;
|
|
pmu_request(&req, NULL, 2, PMU_POWER_EVENTS, PMU_PWR_GET_POWERUP_EVENTS);
|
|
pmu_wait_complete(&req);
|
|
if (req.reply_len < 2)
|
|
return;
|
|
if (server_mode)
|
|
pmu_request(&req, NULL, 4, PMU_POWER_EVENTS,
|
|
PMU_PWR_SET_POWERUP_EVENTS,
|
|
req.reply[0], PMU_PWR_WAKEUP_AC_INSERT);
|
|
else
|
|
pmu_request(&req, NULL, 4, PMU_POWER_EVENTS,
|
|
PMU_PWR_CLR_POWERUP_EVENTS,
|
|
req.reply[0], PMU_PWR_WAKEUP_AC_INSERT);
|
|
pmu_wait_complete(&req);
|
|
}
|
|
|
|
#ifdef CONFIG_PMAC_PBOOK
|
|
|
|
/* This new version of the code for 2400/3400/3500 powerbooks
|
|
* is inspired from the implementation in gkrellm-pmu
|
|
*/
|
|
static void __pmac
|
|
done_battery_state_ohare(struct adb_request* req)
|
|
{
|
|
/* format:
|
|
* [0] : flags
|
|
* 0x01 : AC indicator
|
|
* 0x02 : charging
|
|
* 0x04 : battery exist
|
|
* 0x08 :
|
|
* 0x10 :
|
|
* 0x20 : full charged
|
|
* 0x40 : pcharge reset
|
|
* 0x80 : battery exist
|
|
*
|
|
* [1][2] : battery voltage
|
|
* [3] : CPU temperature
|
|
* [4] : battery temperature
|
|
* [5] : current
|
|
* [6][7] : pcharge
|
|
* --tkoba
|
|
*/
|
|
unsigned int bat_flags = PMU_BATT_TYPE_HOOPER;
|
|
long pcharge, charge, vb, vmax, lmax;
|
|
long vmax_charging, vmax_charged;
|
|
long amperage, voltage, time, max;
|
|
int mb = pmac_call_feature(PMAC_FTR_GET_MB_INFO,
|
|
NULL, PMAC_MB_INFO_MODEL, 0);
|
|
|
|
if (req->reply[0] & 0x01)
|
|
pmu_power_flags |= PMU_PWR_AC_PRESENT;
|
|
else
|
|
pmu_power_flags &= ~PMU_PWR_AC_PRESENT;
|
|
|
|
if (mb == PMAC_TYPE_COMET) {
|
|
vmax_charged = 189;
|
|
vmax_charging = 213;
|
|
lmax = 6500;
|
|
} else {
|
|
vmax_charged = 330;
|
|
vmax_charging = 330;
|
|
lmax = 6500;
|
|
}
|
|
vmax = vmax_charged;
|
|
|
|
/* If battery installed */
|
|
if (req->reply[0] & 0x04) {
|
|
bat_flags |= PMU_BATT_PRESENT;
|
|
if (req->reply[0] & 0x02)
|
|
bat_flags |= PMU_BATT_CHARGING;
|
|
vb = (req->reply[1] << 8) | req->reply[2];
|
|
voltage = (vb * 265 + 72665) / 10;
|
|
amperage = req->reply[5];
|
|
if ((req->reply[0] & 0x01) == 0) {
|
|
if (amperage > 200)
|
|
vb += ((amperage - 200) * 15)/100;
|
|
} else if (req->reply[0] & 0x02) {
|
|
vb = (vb * 97) / 100;
|
|
vmax = vmax_charging;
|
|
}
|
|
charge = (100 * vb) / vmax;
|
|
if (req->reply[0] & 0x40) {
|
|
pcharge = (req->reply[6] << 8) + req->reply[7];
|
|
if (pcharge > lmax)
|
|
pcharge = lmax;
|
|
pcharge *= 100;
|
|
pcharge = 100 - pcharge / lmax;
|
|
if (pcharge < charge)
|
|
charge = pcharge;
|
|
}
|
|
if (amperage > 0)
|
|
time = (charge * 16440) / amperage;
|
|
else
|
|
time = 0;
|
|
max = 100;
|
|
amperage = -amperage;
|
|
} else
|
|
charge = max = amperage = voltage = time = 0;
|
|
|
|
pmu_batteries[pmu_cur_battery].flags = bat_flags;
|
|
pmu_batteries[pmu_cur_battery].charge = charge;
|
|
pmu_batteries[pmu_cur_battery].max_charge = max;
|
|
pmu_batteries[pmu_cur_battery].amperage = amperage;
|
|
pmu_batteries[pmu_cur_battery].voltage = voltage;
|
|
pmu_batteries[pmu_cur_battery].time_remaining = time;
|
|
|
|
clear_bit(0, &async_req_locks);
|
|
}
|
|
|
|
static void __pmac
|
|
done_battery_state_smart(struct adb_request* req)
|
|
{
|
|
/* format:
|
|
* [0] : format of this structure (known: 3,4,5)
|
|
* [1] : flags
|
|
*
|
|
* format 3 & 4:
|
|
*
|
|
* [2] : charge
|
|
* [3] : max charge
|
|
* [4] : current
|
|
* [5] : voltage
|
|
*
|
|
* format 5:
|
|
*
|
|
* [2][3] : charge
|
|
* [4][5] : max charge
|
|
* [6][7] : current
|
|
* [8][9] : voltage
|
|
*/
|
|
|
|
unsigned int bat_flags = PMU_BATT_TYPE_SMART;
|
|
int amperage;
|
|
unsigned int capa, max, voltage;
|
|
|
|
if (req->reply[1] & 0x01)
|
|
pmu_power_flags |= PMU_PWR_AC_PRESENT;
|
|
else
|
|
pmu_power_flags &= ~PMU_PWR_AC_PRESENT;
|
|
|
|
|
|
capa = max = amperage = voltage = 0;
|
|
|
|
if (req->reply[1] & 0x04) {
|
|
bat_flags |= PMU_BATT_PRESENT;
|
|
switch(req->reply[0]) {
|
|
case 3:
|
|
case 4: capa = req->reply[2];
|
|
max = req->reply[3];
|
|
amperage = *((signed char *)&req->reply[4]);
|
|
voltage = req->reply[5];
|
|
break;
|
|
case 5: capa = (req->reply[2] << 8) | req->reply[3];
|
|
max = (req->reply[4] << 8) | req->reply[5];
|
|
amperage = *((signed short *)&req->reply[6]);
|
|
voltage = (req->reply[8] << 8) | req->reply[9];
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING "pmu.c : unrecognized battery info, len: %d, %02x %02x %02x %02x\n",
|
|
req->reply_len, req->reply[0], req->reply[1], req->reply[2], req->reply[3]);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if ((req->reply[1] & 0x01) && (amperage > 0))
|
|
bat_flags |= PMU_BATT_CHARGING;
|
|
|
|
pmu_batteries[pmu_cur_battery].flags = bat_flags;
|
|
pmu_batteries[pmu_cur_battery].charge = capa;
|
|
pmu_batteries[pmu_cur_battery].max_charge = max;
|
|
pmu_batteries[pmu_cur_battery].amperage = amperage;
|
|
pmu_batteries[pmu_cur_battery].voltage = voltage;
|
|
if (amperage) {
|
|
if ((req->reply[1] & 0x01) && (amperage > 0))
|
|
pmu_batteries[pmu_cur_battery].time_remaining
|
|
= ((max-capa) * 3600) / amperage;
|
|
else
|
|
pmu_batteries[pmu_cur_battery].time_remaining
|
|
= (capa * 3600) / (-amperage);
|
|
} else
|
|
pmu_batteries[pmu_cur_battery].time_remaining = 0;
|
|
|
|
pmu_cur_battery = (pmu_cur_battery + 1) % pmu_battery_count;
|
|
|
|
clear_bit(0, &async_req_locks);
|
|
}
|
|
|
|
static void __pmac
|
|
query_battery_state(void)
|
|
{
|
|
if (test_and_set_bit(0, &async_req_locks))
|
|
return;
|
|
if (pmu_kind == PMU_OHARE_BASED)
|
|
pmu_request(&batt_req, done_battery_state_ohare,
|
|
1, PMU_BATTERY_STATE);
|
|
else
|
|
pmu_request(&batt_req, done_battery_state_smart,
|
|
2, PMU_SMART_BATTERY_STATE, pmu_cur_battery+1);
|
|
}
|
|
|
|
#endif /* CONFIG_PMAC_PBOOK */
|
|
|
|
static int __pmac
|
|
proc_get_info(char *page, char **start, off_t off,
|
|
int count, int *eof, void *data)
|
|
{
|
|
char* p = page;
|
|
|
|
p += sprintf(p, "PMU driver version : %d\n", PMU_DRIVER_VERSION);
|
|
p += sprintf(p, "PMU firmware version : %02x\n", pmu_version);
|
|
#ifdef CONFIG_PMAC_PBOOK
|
|
p += sprintf(p, "AC Power : %d\n",
|
|
((pmu_power_flags & PMU_PWR_AC_PRESENT) != 0));
|
|
p += sprintf(p, "Battery count : %d\n", pmu_battery_count);
|
|
#endif /* CONFIG_PMAC_PBOOK */
|
|
|
|
return p - page;
|
|
}
|
|
|
|
static int __pmac
|
|
proc_get_irqstats(char *page, char **start, off_t off,
|
|
int count, int *eof, void *data)
|
|
{
|
|
int i;
|
|
char* p = page;
|
|
static const char *irq_names[] = {
|
|
"Total CB1 triggered events",
|
|
"Total GPIO1 triggered events",
|
|
"PC-Card eject button",
|
|
"Sound/Brightness button",
|
|
"ADB message",
|
|
"Battery state change",
|
|
"Environment interrupt",
|
|
"Tick timer",
|
|
"Ghost interrupt (zero len)",
|
|
"Empty interrupt (empty mask)",
|
|
"Max irqs in a row"
|
|
};
|
|
|
|
for (i=0; i<11; i++) {
|
|
p += sprintf(p, " %2u: %10u (%s)\n",
|
|
i, pmu_irq_stats[i], irq_names[i]);
|
|
}
|
|
return p - page;
|
|
}
|
|
|
|
#ifdef CONFIG_PMAC_PBOOK
|
|
static int __pmac
|
|
proc_get_batt(char *page, char **start, off_t off,
|
|
int count, int *eof, void *data)
|
|
{
|
|
int batnum = (int)data;
|
|
char *p = page;
|
|
|
|
p += sprintf(p, "\n");
|
|
p += sprintf(p, "flags : %08x\n",
|
|
pmu_batteries[batnum].flags);
|
|
p += sprintf(p, "charge : %d\n",
|
|
pmu_batteries[batnum].charge);
|
|
p += sprintf(p, "max_charge : %d\n",
|
|
pmu_batteries[batnum].max_charge);
|
|
p += sprintf(p, "current : %d\n",
|
|
pmu_batteries[batnum].amperage);
|
|
p += sprintf(p, "voltage : %d\n",
|
|
pmu_batteries[batnum].voltage);
|
|
p += sprintf(p, "time rem. : %d\n",
|
|
pmu_batteries[batnum].time_remaining);
|
|
|
|
return p - page;
|
|
}
|
|
#endif /* CONFIG_PMAC_PBOOK */
|
|
|
|
static int __pmac
|
|
proc_read_options(char *page, char **start, off_t off,
|
|
int count, int *eof, void *data)
|
|
{
|
|
char *p = page;
|
|
|
|
#ifdef CONFIG_PMAC_PBOOK
|
|
if (pmu_kind == PMU_KEYLARGO_BASED &&
|
|
pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
|
|
p += sprintf(p, "lid_wakeup=%d\n", option_lid_wakeup);
|
|
#endif /* CONFIG_PMAC_PBOOK */
|
|
if (pmu_kind == PMU_KEYLARGO_BASED)
|
|
p += sprintf(p, "server_mode=%d\n", option_server_mode);
|
|
|
|
return p - page;
|
|
}
|
|
|
|
static int __pmac
|
|
proc_write_options(struct file *file, const char __user *buffer,
|
|
unsigned long count, void *data)
|
|
{
|
|
char tmp[33];
|
|
char *label, *val;
|
|
unsigned long fcount = count;
|
|
|
|
if (!count)
|
|
return -EINVAL;
|
|
if (count > 32)
|
|
count = 32;
|
|
if (copy_from_user(tmp, buffer, count))
|
|
return -EFAULT;
|
|
tmp[count] = 0;
|
|
|
|
label = tmp;
|
|
while(*label == ' ')
|
|
label++;
|
|
val = label;
|
|
while(*val && (*val != '=')) {
|
|
if (*val == ' ')
|
|
*val = 0;
|
|
val++;
|
|
}
|
|
if ((*val) == 0)
|
|
return -EINVAL;
|
|
*(val++) = 0;
|
|
while(*val == ' ')
|
|
val++;
|
|
#ifdef CONFIG_PMAC_PBOOK
|
|
if (pmu_kind == PMU_KEYLARGO_BASED &&
|
|
pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
|
|
if (!strcmp(label, "lid_wakeup"))
|
|
option_lid_wakeup = ((*val) == '1');
|
|
#endif /* CONFIG_PMAC_PBOOK */
|
|
if (pmu_kind == PMU_KEYLARGO_BASED && !strcmp(label, "server_mode")) {
|
|
int new_value;
|
|
new_value = ((*val) == '1');
|
|
if (new_value != option_server_mode)
|
|
pmu_set_server_mode(new_value);
|
|
}
|
|
return fcount;
|
|
}
|
|
|
|
#ifdef CONFIG_ADB
|
|
/* Send an ADB command */
|
|
static int __pmac
|
|
pmu_send_request(struct adb_request *req, int sync)
|
|
{
|
|
int i, ret;
|
|
|
|
if ((vias == NULL) || (!pmu_fully_inited)) {
|
|
req->complete = 1;
|
|
return -ENXIO;
|
|
}
|
|
|
|
ret = -EINVAL;
|
|
|
|
switch (req->data[0]) {
|
|
case PMU_PACKET:
|
|
for (i = 0; i < req->nbytes - 1; ++i)
|
|
req->data[i] = req->data[i+1];
|
|
--req->nbytes;
|
|
if (pmu_data_len[req->data[0]][1] != 0) {
|
|
req->reply[0] = ADB_RET_OK;
|
|
req->reply_len = 1;
|
|
} else
|
|
req->reply_len = 0;
|
|
ret = pmu_queue_request(req);
|
|
break;
|
|
case CUDA_PACKET:
|
|
switch (req->data[1]) {
|
|
case CUDA_GET_TIME:
|
|
if (req->nbytes != 2)
|
|
break;
|
|
req->data[0] = PMU_READ_RTC;
|
|
req->nbytes = 1;
|
|
req->reply_len = 3;
|
|
req->reply[0] = CUDA_PACKET;
|
|
req->reply[1] = 0;
|
|
req->reply[2] = CUDA_GET_TIME;
|
|
ret = pmu_queue_request(req);
|
|
break;
|
|
case CUDA_SET_TIME:
|
|
if (req->nbytes != 6)
|
|
break;
|
|
req->data[0] = PMU_SET_RTC;
|
|
req->nbytes = 5;
|
|
for (i = 1; i <= 4; ++i)
|
|
req->data[i] = req->data[i+1];
|
|
req->reply_len = 3;
|
|
req->reply[0] = CUDA_PACKET;
|
|
req->reply[1] = 0;
|
|
req->reply[2] = CUDA_SET_TIME;
|
|
ret = pmu_queue_request(req);
|
|
break;
|
|
}
|
|
break;
|
|
case ADB_PACKET:
|
|
if (!pmu_has_adb)
|
|
return -ENXIO;
|
|
for (i = req->nbytes - 1; i > 1; --i)
|
|
req->data[i+2] = req->data[i];
|
|
req->data[3] = req->nbytes - 2;
|
|
req->data[2] = pmu_adb_flags;
|
|
/*req->data[1] = req->data[1];*/
|
|
req->data[0] = PMU_ADB_CMD;
|
|
req->nbytes += 2;
|
|
req->reply_expected = 1;
|
|
req->reply_len = 0;
|
|
ret = pmu_queue_request(req);
|
|
break;
|
|
}
|
|
if (ret) {
|
|
req->complete = 1;
|
|
return ret;
|
|
}
|
|
|
|
if (sync)
|
|
while (!req->complete)
|
|
pmu_poll();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Enable/disable autopolling */
|
|
static int __pmac
|
|
pmu_adb_autopoll(int devs)
|
|
{
|
|
struct adb_request req;
|
|
|
|
if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
|
|
return -ENXIO;
|
|
|
|
if (devs) {
|
|
adb_dev_map = devs;
|
|
pmu_request(&req, NULL, 5, PMU_ADB_CMD, 0, 0x86,
|
|
adb_dev_map >> 8, adb_dev_map);
|
|
pmu_adb_flags = 2;
|
|
} else {
|
|
pmu_request(&req, NULL, 1, PMU_ADB_POLL_OFF);
|
|
pmu_adb_flags = 0;
|
|
}
|
|
while (!req.complete)
|
|
pmu_poll();
|
|
return 0;
|
|
}
|
|
|
|
/* Reset the ADB bus */
|
|
static int __pmac
|
|
pmu_adb_reset_bus(void)
|
|
{
|
|
struct adb_request req;
|
|
int save_autopoll = adb_dev_map;
|
|
|
|
if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
|
|
return -ENXIO;
|
|
|
|
/* anyone got a better idea?? */
|
|
pmu_adb_autopoll(0);
|
|
|
|
req.nbytes = 5;
|
|
req.done = NULL;
|
|
req.data[0] = PMU_ADB_CMD;
|
|
req.data[1] = 0;
|
|
req.data[2] = ADB_BUSRESET;
|
|
req.data[3] = 0;
|
|
req.data[4] = 0;
|
|
req.reply_len = 0;
|
|
req.reply_expected = 1;
|
|
if (pmu_queue_request(&req) != 0) {
|
|
printk(KERN_ERR "pmu_adb_reset_bus: pmu_queue_request failed\n");
|
|
return -EIO;
|
|
}
|
|
pmu_wait_complete(&req);
|
|
|
|
if (save_autopoll != 0)
|
|
pmu_adb_autopoll(save_autopoll);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_ADB */
|
|
|
|
/* Construct and send a pmu request */
|
|
int __openfirmware
|
|
pmu_request(struct adb_request *req, void (*done)(struct adb_request *),
|
|
int nbytes, ...)
|
|
{
|
|
va_list list;
|
|
int i;
|
|
|
|
if (vias == NULL)
|
|
return -ENXIO;
|
|
|
|
if (nbytes < 0 || nbytes > 32) {
|
|
printk(KERN_ERR "pmu_request: bad nbytes (%d)\n", nbytes);
|
|
req->complete = 1;
|
|
return -EINVAL;
|
|
}
|
|
req->nbytes = nbytes;
|
|
req->done = done;
|
|
va_start(list, nbytes);
|
|
for (i = 0; i < nbytes; ++i)
|
|
req->data[i] = va_arg(list, int);
|
|
va_end(list);
|
|
req->reply_len = 0;
|
|
req->reply_expected = 0;
|
|
return pmu_queue_request(req);
|
|
}
|
|
|
|
int __pmac
|
|
pmu_queue_request(struct adb_request *req)
|
|
{
|
|
unsigned long flags;
|
|
int nsend;
|
|
|
|
if (via == NULL) {
|
|
req->complete = 1;
|
|
return -ENXIO;
|
|
}
|
|
if (req->nbytes <= 0) {
|
|
req->complete = 1;
|
|
return 0;
|
|
}
|
|
nsend = pmu_data_len[req->data[0]][0];
|
|
if (nsend >= 0 && req->nbytes != nsend + 1) {
|
|
req->complete = 1;
|
|
return -EINVAL;
|
|
}
|
|
|
|
req->next = NULL;
|
|
req->sent = 0;
|
|
req->complete = 0;
|
|
|
|
spin_lock_irqsave(&pmu_lock, flags);
|
|
if (current_req != 0) {
|
|
last_req->next = req;
|
|
last_req = req;
|
|
} else {
|
|
current_req = req;
|
|
last_req = req;
|
|
if (pmu_state == idle)
|
|
pmu_start();
|
|
}
|
|
spin_unlock_irqrestore(&pmu_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void
|
|
wait_for_ack(void)
|
|
{
|
|
/* Sightly increased the delay, I had one occurrence of the message
|
|
* reported
|
|
*/
|
|
int timeout = 4000;
|
|
while ((in_8(&via[B]) & TACK) == 0) {
|
|
if (--timeout < 0) {
|
|
printk(KERN_ERR "PMU not responding (!ack)\n");
|
|
return;
|
|
}
|
|
udelay(10);
|
|
}
|
|
}
|
|
|
|
/* New PMU seems to be very sensitive to those timings, so we make sure
|
|
* PCI is flushed immediately */
|
|
static inline void
|
|
send_byte(int x)
|
|
{
|
|
volatile unsigned char __iomem *v = via;
|
|
|
|
out_8(&v[ACR], in_8(&v[ACR]) | SR_OUT | SR_EXT);
|
|
out_8(&v[SR], x);
|
|
out_8(&v[B], in_8(&v[B]) & ~TREQ); /* assert TREQ */
|
|
(void)in_8(&v[B]);
|
|
}
|
|
|
|
static inline void
|
|
recv_byte(void)
|
|
{
|
|
volatile unsigned char __iomem *v = via;
|
|
|
|
out_8(&v[ACR], (in_8(&v[ACR]) & ~SR_OUT) | SR_EXT);
|
|
in_8(&v[SR]); /* resets SR */
|
|
out_8(&v[B], in_8(&v[B]) & ~TREQ);
|
|
(void)in_8(&v[B]);
|
|
}
|
|
|
|
static inline void
|
|
pmu_done(struct adb_request *req)
|
|
{
|
|
void (*done)(struct adb_request *) = req->done;
|
|
mb();
|
|
req->complete = 1;
|
|
/* Here, we assume that if the request has a done member, the
|
|
* struct request will survive to setting req->complete to 1
|
|
*/
|
|
if (done)
|
|
(*done)(req);
|
|
}
|
|
|
|
static void __pmac
|
|
pmu_start(void)
|
|
{
|
|
struct adb_request *req;
|
|
|
|
/* assert pmu_state == idle */
|
|
/* get the packet to send */
|
|
req = current_req;
|
|
if (req == 0 || pmu_state != idle
|
|
|| (/*req->reply_expected && */req_awaiting_reply))
|
|
return;
|
|
|
|
pmu_state = sending;
|
|
data_index = 1;
|
|
data_len = pmu_data_len[req->data[0]][0];
|
|
|
|
/* Sounds safer to make sure ACK is high before writing. This helped
|
|
* kill a problem with ADB and some iBooks
|
|
*/
|
|
wait_for_ack();
|
|
/* set the shift register to shift out and send a byte */
|
|
send_byte(req->data[0]);
|
|
}
|
|
|
|
void __openfirmware
|
|
pmu_poll(void)
|
|
{
|
|
if (!via)
|
|
return;
|
|
if (disable_poll)
|
|
return;
|
|
via_pmu_interrupt(0, NULL, NULL);
|
|
}
|
|
|
|
void __openfirmware
|
|
pmu_poll_adb(void)
|
|
{
|
|
if (!via)
|
|
return;
|
|
if (disable_poll)
|
|
return;
|
|
/* Kicks ADB read when PMU is suspended */
|
|
adb_int_pending = 1;
|
|
do {
|
|
via_pmu_interrupt(0, NULL, NULL);
|
|
} while (pmu_suspended && (adb_int_pending || pmu_state != idle
|
|
|| req_awaiting_reply));
|
|
}
|
|
|
|
void __openfirmware
|
|
pmu_wait_complete(struct adb_request *req)
|
|
{
|
|
if (!via)
|
|
return;
|
|
while((pmu_state != idle && pmu_state != locked) || !req->complete)
|
|
via_pmu_interrupt(0, NULL, NULL);
|
|
}
|
|
|
|
/* This function loops until the PMU is idle and prevents it from
|
|
* anwsering to ADB interrupts. pmu_request can still be called.
|
|
* This is done to avoid spurrious shutdowns when we know we'll have
|
|
* interrupts switched off for a long time
|
|
*/
|
|
void __openfirmware
|
|
pmu_suspend(void)
|
|
{
|
|
unsigned long flags;
|
|
#ifdef SUSPEND_USES_PMU
|
|
struct adb_request *req;
|
|
#endif
|
|
if (!via)
|
|
return;
|
|
|
|
spin_lock_irqsave(&pmu_lock, flags);
|
|
pmu_suspended++;
|
|
if (pmu_suspended > 1) {
|
|
spin_unlock_irqrestore(&pmu_lock, flags);
|
|
return;
|
|
}
|
|
|
|
do {
|
|
spin_unlock_irqrestore(&pmu_lock, flags);
|
|
if (req_awaiting_reply)
|
|
adb_int_pending = 1;
|
|
via_pmu_interrupt(0, NULL, NULL);
|
|
spin_lock_irqsave(&pmu_lock, flags);
|
|
if (!adb_int_pending && pmu_state == idle && !req_awaiting_reply) {
|
|
#ifdef SUSPEND_USES_PMU
|
|
pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0);
|
|
spin_unlock_irqrestore(&pmu_lock, flags);
|
|
while(!req.complete)
|
|
pmu_poll();
|
|
#else /* SUSPEND_USES_PMU */
|
|
if (gpio_irq >= 0)
|
|
disable_irq_nosync(gpio_irq);
|
|
out_8(&via[IER], CB1_INT | IER_CLR);
|
|
spin_unlock_irqrestore(&pmu_lock, flags);
|
|
#endif /* SUSPEND_USES_PMU */
|
|
break;
|
|
}
|
|
} while (1);
|
|
}
|
|
|
|
void __openfirmware
|
|
pmu_resume(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (!via || (pmu_suspended < 1))
|
|
return;
|
|
|
|
spin_lock_irqsave(&pmu_lock, flags);
|
|
pmu_suspended--;
|
|
if (pmu_suspended > 0) {
|
|
spin_unlock_irqrestore(&pmu_lock, flags);
|
|
return;
|
|
}
|
|
adb_int_pending = 1;
|
|
#ifdef SUSPEND_USES_PMU
|
|
pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
|
|
spin_unlock_irqrestore(&pmu_lock, flags);
|
|
while(!req.complete)
|
|
pmu_poll();
|
|
#else /* SUSPEND_USES_PMU */
|
|
if (gpio_irq >= 0)
|
|
enable_irq(gpio_irq);
|
|
out_8(&via[IER], CB1_INT | IER_SET);
|
|
spin_unlock_irqrestore(&pmu_lock, flags);
|
|
pmu_poll();
|
|
#endif /* SUSPEND_USES_PMU */
|
|
}
|
|
|
|
/* Interrupt data could be the result data from an ADB cmd */
|
|
static void __pmac
|
|
pmu_handle_data(unsigned char *data, int len, struct pt_regs *regs)
|
|
{
|
|
unsigned char ints, pirq;
|
|
int i = 0;
|
|
|
|
asleep = 0;
|
|
if (drop_interrupts || len < 1) {
|
|
adb_int_pending = 0;
|
|
pmu_irq_stats[8]++;
|
|
return;
|
|
}
|
|
|
|
/* Get PMU interrupt mask */
|
|
ints = data[0];
|
|
|
|
/* Record zero interrupts for stats */
|
|
if (ints == 0)
|
|
pmu_irq_stats[9]++;
|
|
|
|
/* Hack to deal with ADB autopoll flag */
|
|
if (ints & PMU_INT_ADB)
|
|
ints &= ~(PMU_INT_ADB_AUTO | PMU_INT_AUTO_SRQ_POLL);
|
|
|
|
next:
|
|
|
|
if (ints == 0) {
|
|
if (i > pmu_irq_stats[10])
|
|
pmu_irq_stats[10] = i;
|
|
return;
|
|
}
|
|
|
|
for (pirq = 0; pirq < 8; pirq++)
|
|
if (ints & (1 << pirq))
|
|
break;
|
|
pmu_irq_stats[pirq]++;
|
|
i++;
|
|
ints &= ~(1 << pirq);
|
|
|
|
/* Note: for some reason, we get an interrupt with len=1,
|
|
* data[0]==0 after each normal ADB interrupt, at least
|
|
* on the Pismo. Still investigating... --BenH
|
|
*/
|
|
if ((1 << pirq) & PMU_INT_ADB) {
|
|
if ((data[0] & PMU_INT_ADB_AUTO) == 0) {
|
|
struct adb_request *req = req_awaiting_reply;
|
|
if (req == 0) {
|
|
printk(KERN_ERR "PMU: extra ADB reply\n");
|
|
return;
|
|
}
|
|
req_awaiting_reply = NULL;
|
|
if (len <= 2)
|
|
req->reply_len = 0;
|
|
else {
|
|
memcpy(req->reply, data + 1, len - 1);
|
|
req->reply_len = len - 1;
|
|
}
|
|
pmu_done(req);
|
|
} else {
|
|
#if defined(CONFIG_XMON) && !defined(CONFIG_PPC64)
|
|
if (len == 4 && data[1] == 0x2c) {
|
|
extern int xmon_wants_key, xmon_adb_keycode;
|
|
if (xmon_wants_key) {
|
|
xmon_adb_keycode = data[2];
|
|
return;
|
|
}
|
|
}
|
|
#endif /* defined(CONFIG_XMON) && !defined(CONFIG_PPC64) */
|
|
#ifdef CONFIG_ADB
|
|
/*
|
|
* XXX On the [23]400 the PMU gives us an up
|
|
* event for keycodes 0x74 or 0x75 when the PC
|
|
* card eject buttons are released, so we
|
|
* ignore those events.
|
|
*/
|
|
if (!(pmu_kind == PMU_OHARE_BASED && len == 4
|
|
&& data[1] == 0x2c && data[3] == 0xff
|
|
&& (data[2] & ~1) == 0xf4))
|
|
adb_input(data+1, len-1, regs, 1);
|
|
#endif /* CONFIG_ADB */
|
|
}
|
|
}
|
|
/* Sound/brightness button pressed */
|
|
else if ((1 << pirq) & PMU_INT_SNDBRT) {
|
|
#ifdef CONFIG_PMAC_BACKLIGHT
|
|
if (len == 3)
|
|
#ifdef CONFIG_INPUT_ADBHID
|
|
if (!disable_kernel_backlight)
|
|
#endif /* CONFIG_INPUT_ADBHID */
|
|
set_backlight_level(data[1] >> 4);
|
|
#endif /* CONFIG_PMAC_BACKLIGHT */
|
|
}
|
|
/* Tick interrupt */
|
|
else if ((1 << pirq) & PMU_INT_TICK) {
|
|
#ifdef CONFIG_PMAC_PBOOK
|
|
/* Environement or tick interrupt, query batteries */
|
|
if (pmu_battery_count) {
|
|
if ((--query_batt_timer) == 0) {
|
|
query_battery_state();
|
|
query_batt_timer = BATTERY_POLLING_COUNT;
|
|
}
|
|
}
|
|
}
|
|
else if ((1 << pirq) & PMU_INT_ENVIRONMENT) {
|
|
if (pmu_battery_count)
|
|
query_battery_state();
|
|
pmu_pass_intr(data, len);
|
|
} else {
|
|
pmu_pass_intr(data, len);
|
|
#endif /* CONFIG_PMAC_PBOOK */
|
|
}
|
|
goto next;
|
|
}
|
|
|
|
static struct adb_request* __pmac
|
|
pmu_sr_intr(struct pt_regs *regs)
|
|
{
|
|
struct adb_request *req;
|
|
int bite = 0;
|
|
|
|
if (via[B] & TREQ) {
|
|
printk(KERN_ERR "PMU: spurious SR intr (%x)\n", via[B]);
|
|
out_8(&via[IFR], SR_INT);
|
|
return NULL;
|
|
}
|
|
/* The ack may not yet be low when we get the interrupt */
|
|
while ((in_8(&via[B]) & TACK) != 0)
|
|
;
|
|
|
|
/* if reading grab the byte, and reset the interrupt */
|
|
if (pmu_state == reading || pmu_state == reading_intr)
|
|
bite = in_8(&via[SR]);
|
|
|
|
/* reset TREQ and wait for TACK to go high */
|
|
out_8(&via[B], in_8(&via[B]) | TREQ);
|
|
wait_for_ack();
|
|
|
|
switch (pmu_state) {
|
|
case sending:
|
|
req = current_req;
|
|
if (data_len < 0) {
|
|
data_len = req->nbytes - 1;
|
|
send_byte(data_len);
|
|
break;
|
|
}
|
|
if (data_index <= data_len) {
|
|
send_byte(req->data[data_index++]);
|
|
break;
|
|
}
|
|
req->sent = 1;
|
|
data_len = pmu_data_len[req->data[0]][1];
|
|
if (data_len == 0) {
|
|
pmu_state = idle;
|
|
current_req = req->next;
|
|
if (req->reply_expected)
|
|
req_awaiting_reply = req;
|
|
else
|
|
return req;
|
|
} else {
|
|
pmu_state = reading;
|
|
data_index = 0;
|
|
reply_ptr = req->reply + req->reply_len;
|
|
recv_byte();
|
|
}
|
|
break;
|
|
|
|
case intack:
|
|
data_index = 0;
|
|
data_len = -1;
|
|
pmu_state = reading_intr;
|
|
reply_ptr = interrupt_data[int_data_last];
|
|
recv_byte();
|
|
if (gpio_irq >= 0 && !gpio_irq_enabled) {
|
|
enable_irq(gpio_irq);
|
|
gpio_irq_enabled = 1;
|
|
}
|
|
break;
|
|
|
|
case reading:
|
|
case reading_intr:
|
|
if (data_len == -1) {
|
|
data_len = bite;
|
|
if (bite > 32)
|
|
printk(KERN_ERR "PMU: bad reply len %d\n", bite);
|
|
} else if (data_index < 32) {
|
|
reply_ptr[data_index++] = bite;
|
|
}
|
|
if (data_index < data_len) {
|
|
recv_byte();
|
|
break;
|
|
}
|
|
|
|
if (pmu_state == reading_intr) {
|
|
pmu_state = idle;
|
|
int_data_state[int_data_last] = int_data_ready;
|
|
interrupt_data_len[int_data_last] = data_len;
|
|
} else {
|
|
req = current_req;
|
|
/*
|
|
* For PMU sleep and freq change requests, we lock the
|
|
* PMU until it's explicitely unlocked. This avoids any
|
|
* spurrious event polling getting in
|
|
*/
|
|
current_req = req->next;
|
|
req->reply_len += data_index;
|
|
if (req->data[0] == PMU_SLEEP || req->data[0] == PMU_CPU_SPEED)
|
|
pmu_state = locked;
|
|
else
|
|
pmu_state = idle;
|
|
return req;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
printk(KERN_ERR "via_pmu_interrupt: unknown state %d?\n",
|
|
pmu_state);
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static irqreturn_t __pmac
|
|
via_pmu_interrupt(int irq, void *arg, struct pt_regs *regs)
|
|
{
|
|
unsigned long flags;
|
|
int intr;
|
|
int nloop = 0;
|
|
int int_data = -1;
|
|
struct adb_request *req = NULL;
|
|
int handled = 0;
|
|
|
|
/* This is a bit brutal, we can probably do better */
|
|
spin_lock_irqsave(&pmu_lock, flags);
|
|
++disable_poll;
|
|
|
|
for (;;) {
|
|
intr = in_8(&via[IFR]) & (SR_INT | CB1_INT);
|
|
if (intr == 0)
|
|
break;
|
|
handled = 1;
|
|
if (++nloop > 1000) {
|
|
printk(KERN_DEBUG "PMU: stuck in intr loop, "
|
|
"intr=%x, ier=%x pmu_state=%d\n",
|
|
intr, in_8(&via[IER]), pmu_state);
|
|
break;
|
|
}
|
|
out_8(&via[IFR], intr);
|
|
if (intr & CB1_INT) {
|
|
adb_int_pending = 1;
|
|
pmu_irq_stats[0]++;
|
|
}
|
|
if (intr & SR_INT) {
|
|
req = pmu_sr_intr(regs);
|
|
if (req)
|
|
break;
|
|
}
|
|
}
|
|
|
|
recheck:
|
|
if (pmu_state == idle) {
|
|
if (adb_int_pending) {
|
|
if (int_data_state[0] == int_data_empty)
|
|
int_data_last = 0;
|
|
else if (int_data_state[1] == int_data_empty)
|
|
int_data_last = 1;
|
|
else
|
|
goto no_free_slot;
|
|
pmu_state = intack;
|
|
int_data_state[int_data_last] = int_data_fill;
|
|
/* Sounds safer to make sure ACK is high before writing.
|
|
* This helped kill a problem with ADB and some iBooks
|
|
*/
|
|
wait_for_ack();
|
|
send_byte(PMU_INT_ACK);
|
|
adb_int_pending = 0;
|
|
} else if (current_req)
|
|
pmu_start();
|
|
}
|
|
no_free_slot:
|
|
/* Mark the oldest buffer for flushing */
|
|
if (int_data_state[!int_data_last] == int_data_ready) {
|
|
int_data_state[!int_data_last] = int_data_flush;
|
|
int_data = !int_data_last;
|
|
} else if (int_data_state[int_data_last] == int_data_ready) {
|
|
int_data_state[int_data_last] = int_data_flush;
|
|
int_data = int_data_last;
|
|
}
|
|
--disable_poll;
|
|
spin_unlock_irqrestore(&pmu_lock, flags);
|
|
|
|
/* Deal with completed PMU requests outside of the lock */
|
|
if (req) {
|
|
pmu_done(req);
|
|
req = NULL;
|
|
}
|
|
|
|
/* Deal with interrupt datas outside of the lock */
|
|
if (int_data >= 0) {
|
|
pmu_handle_data(interrupt_data[int_data], interrupt_data_len[int_data], regs);
|
|
spin_lock_irqsave(&pmu_lock, flags);
|
|
++disable_poll;
|
|
int_data_state[int_data] = int_data_empty;
|
|
int_data = -1;
|
|
goto recheck;
|
|
}
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
void __pmac
|
|
pmu_unlock(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&pmu_lock, flags);
|
|
if (pmu_state == locked)
|
|
pmu_state = idle;
|
|
adb_int_pending = 1;
|
|
spin_unlock_irqrestore(&pmu_lock, flags);
|
|
}
|
|
|
|
|
|
static irqreturn_t __pmac
|
|
gpio1_interrupt(int irq, void *arg, struct pt_regs *regs)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if ((in_8(gpio_reg + 0x9) & 0x02) == 0) {
|
|
spin_lock_irqsave(&pmu_lock, flags);
|
|
if (gpio_irq_enabled > 0) {
|
|
disable_irq_nosync(gpio_irq);
|
|
gpio_irq_enabled = 0;
|
|
}
|
|
pmu_irq_stats[1]++;
|
|
adb_int_pending = 1;
|
|
spin_unlock_irqrestore(&pmu_lock, flags);
|
|
via_pmu_interrupt(0, NULL, NULL);
|
|
return IRQ_HANDLED;
|
|
}
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
#ifdef CONFIG_PMAC_BACKLIGHT
|
|
static int backlight_to_bright[] __pmacdata = {
|
|
0x7f, 0x46, 0x42, 0x3e, 0x3a, 0x36, 0x32, 0x2e,
|
|
0x2a, 0x26, 0x22, 0x1e, 0x1a, 0x16, 0x12, 0x0e
|
|
};
|
|
|
|
static int __openfirmware
|
|
pmu_set_backlight_enable(int on, int level, void* data)
|
|
{
|
|
struct adb_request req;
|
|
|
|
if (vias == NULL)
|
|
return -ENODEV;
|
|
|
|
if (on) {
|
|
pmu_request(&req, NULL, 2, PMU_BACKLIGHT_BRIGHT,
|
|
backlight_to_bright[level]);
|
|
pmu_wait_complete(&req);
|
|
}
|
|
pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
|
|
PMU_POW_BACKLIGHT | (on ? PMU_POW_ON : PMU_POW_OFF));
|
|
pmu_wait_complete(&req);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __openfirmware
|
|
pmu_bright_complete(struct adb_request *req)
|
|
{
|
|
if (req == &bright_req_1)
|
|
clear_bit(1, &async_req_locks);
|
|
if (req == &bright_req_2)
|
|
clear_bit(2, &async_req_locks);
|
|
}
|
|
|
|
static int __openfirmware
|
|
pmu_set_backlight_level(int level, void* data)
|
|
{
|
|
if (vias == NULL)
|
|
return -ENODEV;
|
|
|
|
if (test_and_set_bit(1, &async_req_locks))
|
|
return -EAGAIN;
|
|
pmu_request(&bright_req_1, pmu_bright_complete, 2, PMU_BACKLIGHT_BRIGHT,
|
|
backlight_to_bright[level]);
|
|
if (test_and_set_bit(2, &async_req_locks))
|
|
return -EAGAIN;
|
|
pmu_request(&bright_req_2, pmu_bright_complete, 2, PMU_POWER_CTRL,
|
|
PMU_POW_BACKLIGHT | (level > BACKLIGHT_OFF ?
|
|
PMU_POW_ON : PMU_POW_OFF));
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PMAC_BACKLIGHT */
|
|
|
|
void __pmac
|
|
pmu_enable_irled(int on)
|
|
{
|
|
struct adb_request req;
|
|
|
|
if (vias == NULL)
|
|
return ;
|
|
if (pmu_kind == PMU_KEYLARGO_BASED)
|
|
return ;
|
|
|
|
pmu_request(&req, NULL, 2, PMU_POWER_CTRL, PMU_POW_IRLED |
|
|
(on ? PMU_POW_ON : PMU_POW_OFF));
|
|
pmu_wait_complete(&req);
|
|
}
|
|
|
|
void __pmac
|
|
pmu_restart(void)
|
|
{
|
|
struct adb_request req;
|
|
|
|
if (via == NULL)
|
|
return;
|
|
|
|
local_irq_disable();
|
|
|
|
drop_interrupts = 1;
|
|
|
|
if (pmu_kind != PMU_KEYLARGO_BASED) {
|
|
pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB |
|
|
PMU_INT_TICK );
|
|
while(!req.complete)
|
|
pmu_poll();
|
|
}
|
|
|
|
pmu_request(&req, NULL, 1, PMU_RESET);
|
|
pmu_wait_complete(&req);
|
|
for (;;)
|
|
;
|
|
}
|
|
|
|
void __pmac
|
|
pmu_shutdown(void)
|
|
{
|
|
struct adb_request req;
|
|
|
|
if (via == NULL)
|
|
return;
|
|
|
|
local_irq_disable();
|
|
|
|
drop_interrupts = 1;
|
|
|
|
if (pmu_kind != PMU_KEYLARGO_BASED) {
|
|
pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, PMU_INT_ADB |
|
|
PMU_INT_TICK );
|
|
pmu_wait_complete(&req);
|
|
} else {
|
|
/* Disable server mode on shutdown or we'll just
|
|
* wake up again
|
|
*/
|
|
pmu_set_server_mode(0);
|
|
}
|
|
|
|
pmu_request(&req, NULL, 5, PMU_SHUTDOWN,
|
|
'M', 'A', 'T', 'T');
|
|
pmu_wait_complete(&req);
|
|
for (;;)
|
|
;
|
|
}
|
|
|
|
int
|
|
pmu_present(void)
|
|
{
|
|
return via != 0;
|
|
}
|
|
|
|
struct pmu_i2c_hdr {
|
|
u8 bus;
|
|
u8 mode;
|
|
u8 bus2;
|
|
u8 address;
|
|
u8 sub_addr;
|
|
u8 comb_addr;
|
|
u8 count;
|
|
};
|
|
|
|
int
|
|
pmu_i2c_combined_read(int bus, int addr, int subaddr, u8* data, int len)
|
|
{
|
|
struct adb_request req;
|
|
struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
|
|
int retry;
|
|
int rc;
|
|
|
|
for (retry=0; retry<16; retry++) {
|
|
memset(&req, 0, sizeof(req));
|
|
|
|
hdr->bus = bus;
|
|
hdr->address = addr & 0xfe;
|
|
hdr->mode = PMU_I2C_MODE_COMBINED;
|
|
hdr->bus2 = 0;
|
|
hdr->sub_addr = subaddr;
|
|
hdr->comb_addr = addr | 1;
|
|
hdr->count = len;
|
|
|
|
req.nbytes = sizeof(struct pmu_i2c_hdr) + 1;
|
|
req.reply_expected = 0;
|
|
req.reply_len = 0;
|
|
req.data[0] = PMU_I2C_CMD;
|
|
req.reply[0] = 0xff;
|
|
rc = pmu_queue_request(&req);
|
|
if (rc)
|
|
return rc;
|
|
while(!req.complete)
|
|
pmu_poll();
|
|
if (req.reply[0] == PMU_I2C_STATUS_OK)
|
|
break;
|
|
mdelay(15);
|
|
}
|
|
if (req.reply[0] != PMU_I2C_STATUS_OK)
|
|
return -1;
|
|
|
|
for (retry=0; retry<16; retry++) {
|
|
memset(&req, 0, sizeof(req));
|
|
|
|
mdelay(15);
|
|
|
|
hdr->bus = PMU_I2C_BUS_STATUS;
|
|
req.reply[0] = 0xff;
|
|
|
|
req.nbytes = 2;
|
|
req.reply_expected = 0;
|
|
req.reply_len = 0;
|
|
req.data[0] = PMU_I2C_CMD;
|
|
rc = pmu_queue_request(&req);
|
|
if (rc)
|
|
return rc;
|
|
while(!req.complete)
|
|
pmu_poll();
|
|
if (req.reply[0] == PMU_I2C_STATUS_DATAREAD) {
|
|
memcpy(data, &req.reply[1], req.reply_len - 1);
|
|
return req.reply_len - 1;
|
|
}
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
int
|
|
pmu_i2c_stdsub_write(int bus, int addr, int subaddr, u8* data, int len)
|
|
{
|
|
struct adb_request req;
|
|
struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
|
|
int retry;
|
|
int rc;
|
|
|
|
for (retry=0; retry<16; retry++) {
|
|
memset(&req, 0, sizeof(req));
|
|
|
|
hdr->bus = bus;
|
|
hdr->address = addr & 0xfe;
|
|
hdr->mode = PMU_I2C_MODE_STDSUB;
|
|
hdr->bus2 = 0;
|
|
hdr->sub_addr = subaddr;
|
|
hdr->comb_addr = addr & 0xfe;
|
|
hdr->count = len;
|
|
|
|
req.data[0] = PMU_I2C_CMD;
|
|
memcpy(&req.data[sizeof(struct pmu_i2c_hdr) + 1], data, len);
|
|
req.nbytes = sizeof(struct pmu_i2c_hdr) + len + 1;
|
|
req.reply_expected = 0;
|
|
req.reply_len = 0;
|
|
req.reply[0] = 0xff;
|
|
rc = pmu_queue_request(&req);
|
|
if (rc)
|
|
return rc;
|
|
while(!req.complete)
|
|
pmu_poll();
|
|
if (req.reply[0] == PMU_I2C_STATUS_OK)
|
|
break;
|
|
mdelay(15);
|
|
}
|
|
if (req.reply[0] != PMU_I2C_STATUS_OK)
|
|
return -1;
|
|
|
|
for (retry=0; retry<16; retry++) {
|
|
memset(&req, 0, sizeof(req));
|
|
|
|
mdelay(15);
|
|
|
|
hdr->bus = PMU_I2C_BUS_STATUS;
|
|
req.reply[0] = 0xff;
|
|
|
|
req.nbytes = 2;
|
|
req.reply_expected = 0;
|
|
req.reply_len = 0;
|
|
req.data[0] = PMU_I2C_CMD;
|
|
rc = pmu_queue_request(&req);
|
|
if (rc)
|
|
return rc;
|
|
while(!req.complete)
|
|
pmu_poll();
|
|
if (req.reply[0] == PMU_I2C_STATUS_OK)
|
|
return len;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
int
|
|
pmu_i2c_simple_read(int bus, int addr, u8* data, int len)
|
|
{
|
|
struct adb_request req;
|
|
struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
|
|
int retry;
|
|
int rc;
|
|
|
|
for (retry=0; retry<16; retry++) {
|
|
memset(&req, 0, sizeof(req));
|
|
|
|
hdr->bus = bus;
|
|
hdr->address = addr | 1;
|
|
hdr->mode = PMU_I2C_MODE_SIMPLE;
|
|
hdr->bus2 = 0;
|
|
hdr->sub_addr = 0;
|
|
hdr->comb_addr = 0;
|
|
hdr->count = len;
|
|
|
|
req.data[0] = PMU_I2C_CMD;
|
|
req.nbytes = sizeof(struct pmu_i2c_hdr) + 1;
|
|
req.reply_expected = 0;
|
|
req.reply_len = 0;
|
|
req.reply[0] = 0xff;
|
|
rc = pmu_queue_request(&req);
|
|
if (rc)
|
|
return rc;
|
|
while(!req.complete)
|
|
pmu_poll();
|
|
if (req.reply[0] == PMU_I2C_STATUS_OK)
|
|
break;
|
|
mdelay(15);
|
|
}
|
|
if (req.reply[0] != PMU_I2C_STATUS_OK)
|
|
return -1;
|
|
|
|
for (retry=0; retry<16; retry++) {
|
|
memset(&req, 0, sizeof(req));
|
|
|
|
mdelay(15);
|
|
|
|
hdr->bus = PMU_I2C_BUS_STATUS;
|
|
req.reply[0] = 0xff;
|
|
|
|
req.nbytes = 2;
|
|
req.reply_expected = 0;
|
|
req.reply_len = 0;
|
|
req.data[0] = PMU_I2C_CMD;
|
|
rc = pmu_queue_request(&req);
|
|
if (rc)
|
|
return rc;
|
|
while(!req.complete)
|
|
pmu_poll();
|
|
if (req.reply[0] == PMU_I2C_STATUS_DATAREAD) {
|
|
memcpy(data, &req.reply[1], req.reply_len - 1);
|
|
return req.reply_len - 1;
|
|
}
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
int
|
|
pmu_i2c_simple_write(int bus, int addr, u8* data, int len)
|
|
{
|
|
struct adb_request req;
|
|
struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req.data[1];
|
|
int retry;
|
|
int rc;
|
|
|
|
for (retry=0; retry<16; retry++) {
|
|
memset(&req, 0, sizeof(req));
|
|
|
|
hdr->bus = bus;
|
|
hdr->address = addr & 0xfe;
|
|
hdr->mode = PMU_I2C_MODE_SIMPLE;
|
|
hdr->bus2 = 0;
|
|
hdr->sub_addr = 0;
|
|
hdr->comb_addr = 0;
|
|
hdr->count = len;
|
|
|
|
req.data[0] = PMU_I2C_CMD;
|
|
memcpy(&req.data[sizeof(struct pmu_i2c_hdr) + 1], data, len);
|
|
req.nbytes = sizeof(struct pmu_i2c_hdr) + len + 1;
|
|
req.reply_expected = 0;
|
|
req.reply_len = 0;
|
|
req.reply[0] = 0xff;
|
|
rc = pmu_queue_request(&req);
|
|
if (rc)
|
|
return rc;
|
|
while(!req.complete)
|
|
pmu_poll();
|
|
if (req.reply[0] == PMU_I2C_STATUS_OK)
|
|
break;
|
|
mdelay(15);
|
|
}
|
|
if (req.reply[0] != PMU_I2C_STATUS_OK)
|
|
return -1;
|
|
|
|
for (retry=0; retry<16; retry++) {
|
|
memset(&req, 0, sizeof(req));
|
|
|
|
mdelay(15);
|
|
|
|
hdr->bus = PMU_I2C_BUS_STATUS;
|
|
req.reply[0] = 0xff;
|
|
|
|
req.nbytes = 2;
|
|
req.reply_expected = 0;
|
|
req.reply_len = 0;
|
|
req.data[0] = PMU_I2C_CMD;
|
|
rc = pmu_queue_request(&req);
|
|
if (rc)
|
|
return rc;
|
|
while(!req.complete)
|
|
pmu_poll();
|
|
if (req.reply[0] == PMU_I2C_STATUS_OK)
|
|
return len;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
#ifdef CONFIG_PMAC_PBOOK
|
|
|
|
static LIST_HEAD(sleep_notifiers);
|
|
|
|
int
|
|
pmu_register_sleep_notifier(struct pmu_sleep_notifier *n)
|
|
{
|
|
struct list_head *list;
|
|
struct pmu_sleep_notifier *notifier;
|
|
|
|
for (list = sleep_notifiers.next; list != &sleep_notifiers;
|
|
list = list->next) {
|
|
notifier = list_entry(list, struct pmu_sleep_notifier, list);
|
|
if (n->priority > notifier->priority)
|
|
break;
|
|
}
|
|
__list_add(&n->list, list->prev, list);
|
|
return 0;
|
|
}
|
|
|
|
int
|
|
pmu_unregister_sleep_notifier(struct pmu_sleep_notifier* n)
|
|
{
|
|
if (n->list.next == 0)
|
|
return -ENOENT;
|
|
list_del(&n->list);
|
|
n->list.next = NULL;
|
|
return 0;
|
|
}
|
|
|
|
/* Sleep is broadcast last-to-first */
|
|
static int __pmac
|
|
broadcast_sleep(int when, int fallback)
|
|
{
|
|
int ret = PBOOK_SLEEP_OK;
|
|
struct list_head *list;
|
|
struct pmu_sleep_notifier *notifier;
|
|
|
|
for (list = sleep_notifiers.prev; list != &sleep_notifiers;
|
|
list = list->prev) {
|
|
notifier = list_entry(list, struct pmu_sleep_notifier, list);
|
|
ret = notifier->notifier_call(notifier, when);
|
|
if (ret != PBOOK_SLEEP_OK) {
|
|
printk(KERN_DEBUG "sleep %d rejected by %p (%p)\n",
|
|
when, notifier, notifier->notifier_call);
|
|
for (; list != &sleep_notifiers; list = list->next) {
|
|
notifier = list_entry(list, struct pmu_sleep_notifier, list);
|
|
notifier->notifier_call(notifier, fallback);
|
|
}
|
|
return ret;
|
|
}
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* Wake is broadcast first-to-last */
|
|
static int __pmac
|
|
broadcast_wake(void)
|
|
{
|
|
int ret = PBOOK_SLEEP_OK;
|
|
struct list_head *list;
|
|
struct pmu_sleep_notifier *notifier;
|
|
|
|
for (list = sleep_notifiers.next; list != &sleep_notifiers;
|
|
list = list->next) {
|
|
notifier = list_entry(list, struct pmu_sleep_notifier, list);
|
|
notifier->notifier_call(notifier, PBOOK_WAKE);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* This struct is used to store config register values for
|
|
* PCI devices which may get powered off when we sleep.
|
|
*/
|
|
static struct pci_save {
|
|
#ifndef HACKED_PCI_SAVE
|
|
u16 command;
|
|
u16 cache_lat;
|
|
u16 intr;
|
|
u32 rom_address;
|
|
#else
|
|
u32 config[16];
|
|
#endif
|
|
} *pbook_pci_saves;
|
|
static int pbook_npci_saves;
|
|
|
|
static void __pmac
|
|
pbook_alloc_pci_save(void)
|
|
{
|
|
int npci;
|
|
struct pci_dev *pd = NULL;
|
|
|
|
npci = 0;
|
|
while ((pd = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) {
|
|
++npci;
|
|
}
|
|
if (npci == 0)
|
|
return;
|
|
pbook_pci_saves = (struct pci_save *)
|
|
kmalloc(npci * sizeof(struct pci_save), GFP_KERNEL);
|
|
pbook_npci_saves = npci;
|
|
}
|
|
|
|
static void __pmac
|
|
pbook_free_pci_save(void)
|
|
{
|
|
if (pbook_pci_saves == NULL)
|
|
return;
|
|
kfree(pbook_pci_saves);
|
|
pbook_pci_saves = NULL;
|
|
pbook_npci_saves = 0;
|
|
}
|
|
|
|
static void __pmac
|
|
pbook_pci_save(void)
|
|
{
|
|
struct pci_save *ps = pbook_pci_saves;
|
|
struct pci_dev *pd = NULL;
|
|
int npci = pbook_npci_saves;
|
|
|
|
if (ps == NULL)
|
|
return;
|
|
|
|
while ((pd = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) {
|
|
if (npci-- == 0)
|
|
return;
|
|
#ifndef HACKED_PCI_SAVE
|
|
pci_read_config_word(pd, PCI_COMMAND, &ps->command);
|
|
pci_read_config_word(pd, PCI_CACHE_LINE_SIZE, &ps->cache_lat);
|
|
pci_read_config_word(pd, PCI_INTERRUPT_LINE, &ps->intr);
|
|
pci_read_config_dword(pd, PCI_ROM_ADDRESS, &ps->rom_address);
|
|
#else
|
|
int i;
|
|
for (i=1;i<16;i++)
|
|
pci_read_config_dword(pd, i<<4, &ps->config[i]);
|
|
#endif
|
|
++ps;
|
|
}
|
|
}
|
|
|
|
/* For this to work, we must take care of a few things: If gmac was enabled
|
|
* during boot, it will be in the pci dev list. If it's disabled at this point
|
|
* (and it will probably be), then you can't access it's config space.
|
|
*/
|
|
static void __pmac
|
|
pbook_pci_restore(void)
|
|
{
|
|
u16 cmd;
|
|
struct pci_save *ps = pbook_pci_saves - 1;
|
|
struct pci_dev *pd = NULL;
|
|
int npci = pbook_npci_saves;
|
|
int j;
|
|
|
|
while ((pd = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pd)) != NULL) {
|
|
#ifdef HACKED_PCI_SAVE
|
|
int i;
|
|
if (npci-- == 0)
|
|
return;
|
|
ps++;
|
|
for (i=2;i<16;i++)
|
|
pci_write_config_dword(pd, i<<4, ps->config[i]);
|
|
pci_write_config_dword(pd, 4, ps->config[1]);
|
|
#else
|
|
if (npci-- == 0)
|
|
return;
|
|
ps++;
|
|
if (ps->command == 0)
|
|
continue;
|
|
pci_read_config_word(pd, PCI_COMMAND, &cmd);
|
|
if ((ps->command & ~cmd) == 0)
|
|
continue;
|
|
switch (pd->hdr_type) {
|
|
case PCI_HEADER_TYPE_NORMAL:
|
|
for (j = 0; j < 6; ++j)
|
|
pci_write_config_dword(pd,
|
|
PCI_BASE_ADDRESS_0 + j*4,
|
|
pd->resource[j].start);
|
|
pci_write_config_dword(pd, PCI_ROM_ADDRESS,
|
|
ps->rom_address);
|
|
pci_write_config_word(pd, PCI_CACHE_LINE_SIZE,
|
|
ps->cache_lat);
|
|
pci_write_config_word(pd, PCI_INTERRUPT_LINE,
|
|
ps->intr);
|
|
pci_write_config_word(pd, PCI_COMMAND, ps->command);
|
|
break;
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
|
|
#ifdef DEBUG_SLEEP
|
|
/* N.B. This doesn't work on the 3400 */
|
|
void __pmac
|
|
pmu_blink(int n)
|
|
{
|
|
struct adb_request req;
|
|
|
|
memset(&req, 0, sizeof(req));
|
|
|
|
for (; n > 0; --n) {
|
|
req.nbytes = 4;
|
|
req.done = NULL;
|
|
req.data[0] = 0xee;
|
|
req.data[1] = 4;
|
|
req.data[2] = 0;
|
|
req.data[3] = 1;
|
|
req.reply[0] = ADB_RET_OK;
|
|
req.reply_len = 1;
|
|
req.reply_expected = 0;
|
|
pmu_polled_request(&req);
|
|
mdelay(50);
|
|
req.nbytes = 4;
|
|
req.done = NULL;
|
|
req.data[0] = 0xee;
|
|
req.data[1] = 4;
|
|
req.data[2] = 0;
|
|
req.data[3] = 0;
|
|
req.reply[0] = ADB_RET_OK;
|
|
req.reply_len = 1;
|
|
req.reply_expected = 0;
|
|
pmu_polled_request(&req);
|
|
mdelay(50);
|
|
}
|
|
mdelay(50);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Put the powerbook to sleep.
|
|
*/
|
|
|
|
static u32 save_via[8] __pmacdata;
|
|
|
|
static void __pmac
|
|
save_via_state(void)
|
|
{
|
|
save_via[0] = in_8(&via[ANH]);
|
|
save_via[1] = in_8(&via[DIRA]);
|
|
save_via[2] = in_8(&via[B]);
|
|
save_via[3] = in_8(&via[DIRB]);
|
|
save_via[4] = in_8(&via[PCR]);
|
|
save_via[5] = in_8(&via[ACR]);
|
|
save_via[6] = in_8(&via[T1CL]);
|
|
save_via[7] = in_8(&via[T1CH]);
|
|
}
|
|
static void __pmac
|
|
restore_via_state(void)
|
|
{
|
|
out_8(&via[ANH], save_via[0]);
|
|
out_8(&via[DIRA], save_via[1]);
|
|
out_8(&via[B], save_via[2]);
|
|
out_8(&via[DIRB], save_via[3]);
|
|
out_8(&via[PCR], save_via[4]);
|
|
out_8(&via[ACR], save_via[5]);
|
|
out_8(&via[T1CL], save_via[6]);
|
|
out_8(&via[T1CH], save_via[7]);
|
|
out_8(&via[IER], IER_CLR | 0x7f); /* disable all intrs */
|
|
out_8(&via[IFR], 0x7f); /* clear IFR */
|
|
out_8(&via[IER], IER_SET | SR_INT | CB1_INT);
|
|
}
|
|
|
|
static int __pmac
|
|
pmac_suspend_devices(void)
|
|
{
|
|
int ret;
|
|
|
|
pm_prepare_console();
|
|
|
|
/* Notify old-style device drivers & userland */
|
|
ret = broadcast_sleep(PBOOK_SLEEP_REQUEST, PBOOK_SLEEP_REJECT);
|
|
if (ret != PBOOK_SLEEP_OK) {
|
|
printk(KERN_ERR "Sleep rejected by drivers\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* Sync the disks. */
|
|
/* XXX It would be nice to have some way to ensure that
|
|
* nobody is dirtying any new buffers while we wait. That
|
|
* could be achieved using the refrigerator for processes
|
|
* that swsusp uses
|
|
*/
|
|
sys_sync();
|
|
|
|
/* Sleep can fail now. May not be very robust but useful for debugging */
|
|
ret = broadcast_sleep(PBOOK_SLEEP_NOW, PBOOK_WAKE);
|
|
if (ret != PBOOK_SLEEP_OK) {
|
|
printk(KERN_ERR "Driver sleep failed\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* Send suspend call to devices, hold the device core's dpm_sem */
|
|
ret = device_suspend(PMSG_SUSPEND);
|
|
if (ret) {
|
|
broadcast_wake();
|
|
printk(KERN_ERR "Driver sleep failed\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
preempt_disable();
|
|
|
|
/* Make sure the decrementer won't interrupt us */
|
|
asm volatile("mtdec %0" : : "r" (0x7fffffff));
|
|
/* Make sure any pending DEC interrupt occurring while we did
|
|
* the above didn't re-enable the DEC */
|
|
mb();
|
|
asm volatile("mtdec %0" : : "r" (0x7fffffff));
|
|
|
|
/* We can now disable MSR_EE. This code of course works properly only
|
|
* on UP machines... For SMP, if we ever implement sleep, we'll have to
|
|
* stop the "other" CPUs way before we do all that stuff.
|
|
*/
|
|
local_irq_disable();
|
|
|
|
/* Broadcast power down irq
|
|
* This isn't that useful in most cases (only directly wired devices can
|
|
* use this but still... This will take care of sysdev's as well, so
|
|
* we exit from here with local irqs disabled and PIC off.
|
|
*/
|
|
ret = device_power_down(PMSG_SUSPEND);
|
|
if (ret) {
|
|
wakeup_decrementer();
|
|
local_irq_enable();
|
|
preempt_enable();
|
|
device_resume();
|
|
broadcast_wake();
|
|
printk(KERN_ERR "Driver powerdown failed\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* Wait for completion of async backlight requests */
|
|
while (!bright_req_1.complete || !bright_req_2.complete ||
|
|
!batt_req.complete)
|
|
pmu_poll();
|
|
|
|
/* Giveup the lazy FPU & vec so we don't have to back them
|
|
* up from the low level code
|
|
*/
|
|
enable_kernel_fp();
|
|
|
|
#ifdef CONFIG_ALTIVEC
|
|
if (cpu_has_feature(CPU_FTR_ALTIVEC))
|
|
enable_kernel_altivec();
|
|
#endif /* CONFIG_ALTIVEC */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __pmac
|
|
pmac_wakeup_devices(void)
|
|
{
|
|
mdelay(100);
|
|
|
|
/* Power back up system devices (including the PIC) */
|
|
device_power_up();
|
|
|
|
/* Force a poll of ADB interrupts */
|
|
adb_int_pending = 1;
|
|
via_pmu_interrupt(0, NULL, NULL);
|
|
|
|
/* Restart jiffies & scheduling */
|
|
wakeup_decrementer();
|
|
|
|
/* Re-enable local CPU interrupts */
|
|
local_irq_enable();
|
|
|
|
mdelay(100);
|
|
|
|
preempt_enable();
|
|
|
|
/* Resume devices */
|
|
device_resume();
|
|
|
|
/* Notify old style drivers */
|
|
broadcast_wake();
|
|
|
|
pm_restore_console();
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define GRACKLE_PM (1<<7)
|
|
#define GRACKLE_DOZE (1<<5)
|
|
#define GRACKLE_NAP (1<<4)
|
|
#define GRACKLE_SLEEP (1<<3)
|
|
|
|
int __pmac
|
|
powerbook_sleep_grackle(void)
|
|
{
|
|
unsigned long save_l2cr;
|
|
unsigned short pmcr1;
|
|
struct adb_request req;
|
|
int ret;
|
|
struct pci_dev *grackle;
|
|
|
|
grackle = pci_find_slot(0, 0);
|
|
if (!grackle)
|
|
return -ENODEV;
|
|
|
|
ret = pmac_suspend_devices();
|
|
if (ret) {
|
|
printk(KERN_ERR "Sleep rejected by devices\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Turn off various things. Darwin does some retry tests here... */
|
|
pmu_request(&req, NULL, 2, PMU_POWER_CTRL0, PMU_POW0_OFF|PMU_POW0_HARD_DRIVE);
|
|
pmu_wait_complete(&req);
|
|
pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
|
|
PMU_POW_OFF|PMU_POW_BACKLIGHT|PMU_POW_IRLED|PMU_POW_MEDIABAY);
|
|
pmu_wait_complete(&req);
|
|
|
|
/* For 750, save backside cache setting and disable it */
|
|
save_l2cr = _get_L2CR(); /* (returns -1 if not available) */
|
|
|
|
if (!__fake_sleep) {
|
|
/* Ask the PMU to put us to sleep */
|
|
pmu_request(&req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
|
|
pmu_wait_complete(&req);
|
|
}
|
|
|
|
/* The VIA is supposed not to be restored correctly*/
|
|
save_via_state();
|
|
/* We shut down some HW */
|
|
pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,1);
|
|
|
|
pci_read_config_word(grackle, 0x70, &pmcr1);
|
|
/* Apparently, MacOS uses NAP mode for Grackle ??? */
|
|
pmcr1 &= ~(GRACKLE_DOZE|GRACKLE_SLEEP);
|
|
pmcr1 |= GRACKLE_PM|GRACKLE_NAP;
|
|
pci_write_config_word(grackle, 0x70, pmcr1);
|
|
|
|
/* Call low-level ASM sleep handler */
|
|
if (__fake_sleep)
|
|
mdelay(5000);
|
|
else
|
|
low_sleep_handler();
|
|
|
|
/* We're awake again, stop grackle PM */
|
|
pci_read_config_word(grackle, 0x70, &pmcr1);
|
|
pmcr1 &= ~(GRACKLE_PM|GRACKLE_DOZE|GRACKLE_SLEEP|GRACKLE_NAP);
|
|
pci_write_config_word(grackle, 0x70, pmcr1);
|
|
|
|
/* Make sure the PMU is idle */
|
|
pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,0);
|
|
restore_via_state();
|
|
|
|
/* Restore L2 cache */
|
|
if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
|
|
_set_L2CR(save_l2cr);
|
|
|
|
/* Restore userland MMU context */
|
|
set_context(current->active_mm->context, current->active_mm->pgd);
|
|
|
|
/* Power things up */
|
|
pmu_unlock();
|
|
pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
|
|
pmu_wait_complete(&req);
|
|
pmu_request(&req, NULL, 2, PMU_POWER_CTRL0,
|
|
PMU_POW0_ON|PMU_POW0_HARD_DRIVE);
|
|
pmu_wait_complete(&req);
|
|
pmu_request(&req, NULL, 2, PMU_POWER_CTRL,
|
|
PMU_POW_ON|PMU_POW_BACKLIGHT|PMU_POW_CHARGER|PMU_POW_IRLED|PMU_POW_MEDIABAY);
|
|
pmu_wait_complete(&req);
|
|
|
|
pmac_wakeup_devices();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __pmac
|
|
powerbook_sleep_Core99(void)
|
|
{
|
|
unsigned long save_l2cr;
|
|
unsigned long save_l3cr;
|
|
struct adb_request req;
|
|
int ret;
|
|
|
|
if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0) {
|
|
printk(KERN_ERR "Sleep mode not supported on this machine\n");
|
|
return -ENOSYS;
|
|
}
|
|
|
|
if (num_online_cpus() > 1 || cpu_is_offline(0))
|
|
return -EAGAIN;
|
|
|
|
ret = pmac_suspend_devices();
|
|
if (ret) {
|
|
printk(KERN_ERR "Sleep rejected by devices\n");
|
|
return ret;
|
|
}
|
|
|
|
printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
|
|
|
|
/* Tell PMU what events will wake us up */
|
|
pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_CLR_WAKEUP_EVENTS,
|
|
0xff, 0xff);
|
|
pmu_wait_complete(&req);
|
|
pmu_request(&req, NULL, 4, PMU_POWER_EVENTS, PMU_PWR_SET_WAKEUP_EVENTS,
|
|
0, PMU_PWR_WAKEUP_KEY |
|
|
(option_lid_wakeup ? PMU_PWR_WAKEUP_LID_OPEN : 0));
|
|
pmu_wait_complete(&req);
|
|
|
|
/* Save the state of the L2 and L3 caches */
|
|
save_l3cr = _get_L3CR(); /* (returns -1 if not available) */
|
|
save_l2cr = _get_L2CR(); /* (returns -1 if not available) */
|
|
|
|
if (!__fake_sleep) {
|
|
/* Ask the PMU to put us to sleep */
|
|
pmu_request(&req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
|
|
pmu_wait_complete(&req);
|
|
}
|
|
|
|
/* The VIA is supposed not to be restored correctly*/
|
|
save_via_state();
|
|
|
|
/* Shut down various ASICs. There's a chance that we can no longer
|
|
* talk to the PMU after this, so I moved it to _after_ sending the
|
|
* sleep command to it. Still need to be checked.
|
|
*/
|
|
pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 1);
|
|
|
|
/* Call low-level ASM sleep handler */
|
|
if (__fake_sleep)
|
|
mdelay(5000);
|
|
else
|
|
low_sleep_handler();
|
|
|
|
/* Restore Apple core ASICs state */
|
|
pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, 0);
|
|
|
|
/* Restore VIA */
|
|
restore_via_state();
|
|
|
|
/* Restore video */
|
|
pmac_call_early_video_resume();
|
|
|
|
/* Restore L2 cache */
|
|
if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
|
|
_set_L2CR(save_l2cr);
|
|
/* Restore L3 cache */
|
|
if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
|
|
_set_L3CR(save_l3cr);
|
|
|
|
/* Restore userland MMU context */
|
|
set_context(current->active_mm->context, current->active_mm->pgd);
|
|
|
|
/* Tell PMU we are ready */
|
|
pmu_unlock();
|
|
pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
|
|
pmu_wait_complete(&req);
|
|
pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
|
|
pmu_wait_complete(&req);
|
|
|
|
printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
|
|
|
|
pmac_wakeup_devices();
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define PB3400_MEM_CTRL 0xf8000000
|
|
#define PB3400_MEM_CTRL_SLEEP 0x70
|
|
|
|
static int __pmac
|
|
powerbook_sleep_3400(void)
|
|
{
|
|
int ret, i, x;
|
|
unsigned int hid0;
|
|
unsigned long p;
|
|
struct adb_request sleep_req;
|
|
void __iomem *mem_ctrl;
|
|
unsigned int __iomem *mem_ctrl_sleep;
|
|
|
|
/* first map in the memory controller registers */
|
|
mem_ctrl = ioremap(PB3400_MEM_CTRL, 0x100);
|
|
if (mem_ctrl == NULL) {
|
|
printk("powerbook_sleep_3400: ioremap failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
mem_ctrl_sleep = mem_ctrl + PB3400_MEM_CTRL_SLEEP;
|
|
|
|
/* Allocate room for PCI save */
|
|
pbook_alloc_pci_save();
|
|
|
|
ret = pmac_suspend_devices();
|
|
if (ret) {
|
|
pbook_free_pci_save();
|
|
printk(KERN_ERR "Sleep rejected by devices\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Save the state of PCI config space for some slots */
|
|
pbook_pci_save();
|
|
|
|
/* Set the memory controller to keep the memory refreshed
|
|
while we're asleep */
|
|
for (i = 0x403f; i >= 0x4000; --i) {
|
|
out_be32(mem_ctrl_sleep, i);
|
|
do {
|
|
x = (in_be32(mem_ctrl_sleep) >> 16) & 0x3ff;
|
|
} while (x == 0);
|
|
if (x >= 0x100)
|
|
break;
|
|
}
|
|
|
|
/* Ask the PMU to put us to sleep */
|
|
pmu_request(&sleep_req, NULL, 5, PMU_SLEEP, 'M', 'A', 'T', 'T');
|
|
while (!sleep_req.complete)
|
|
mb();
|
|
|
|
pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,1);
|
|
|
|
/* displacement-flush the L2 cache - necessary? */
|
|
for (p = KERNELBASE; p < KERNELBASE + 0x100000; p += 0x1000)
|
|
i = *(volatile int *)p;
|
|
asleep = 1;
|
|
|
|
/* Put the CPU into sleep mode */
|
|
asm volatile("mfspr %0,1008" : "=r" (hid0) :);
|
|
hid0 = (hid0 & ~(HID0_NAP | HID0_DOZE)) | HID0_SLEEP;
|
|
asm volatile("mtspr 1008,%0" : : "r" (hid0));
|
|
_nmask_and_or_msr(0, MSR_POW | MSR_EE);
|
|
udelay(10);
|
|
|
|
/* OK, we're awake again, start restoring things */
|
|
out_be32(mem_ctrl_sleep, 0x3f);
|
|
pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,0);
|
|
pbook_pci_restore();
|
|
pmu_unlock();
|
|
|
|
/* wait for the PMU interrupt sequence to complete */
|
|
while (asleep)
|
|
mb();
|
|
|
|
pmac_wakeup_devices();
|
|
pbook_free_pci_save();
|
|
iounmap(mem_ctrl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Support for /dev/pmu device
|
|
*/
|
|
#define RB_SIZE 0x10
|
|
struct pmu_private {
|
|
struct list_head list;
|
|
int rb_get;
|
|
int rb_put;
|
|
struct rb_entry {
|
|
unsigned short len;
|
|
unsigned char data[16];
|
|
} rb_buf[RB_SIZE];
|
|
wait_queue_head_t wait;
|
|
spinlock_t lock;
|
|
#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
|
|
int backlight_locker;
|
|
#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */
|
|
};
|
|
|
|
static LIST_HEAD(all_pmu_pvt);
|
|
static DEFINE_SPINLOCK(all_pvt_lock __pmacdata);
|
|
|
|
static void __pmac
|
|
pmu_pass_intr(unsigned char *data, int len)
|
|
{
|
|
struct pmu_private *pp;
|
|
struct list_head *list;
|
|
int i;
|
|
unsigned long flags;
|
|
|
|
if (len > sizeof(pp->rb_buf[0].data))
|
|
len = sizeof(pp->rb_buf[0].data);
|
|
spin_lock_irqsave(&all_pvt_lock, flags);
|
|
for (list = &all_pmu_pvt; (list = list->next) != &all_pmu_pvt; ) {
|
|
pp = list_entry(list, struct pmu_private, list);
|
|
spin_lock(&pp->lock);
|
|
i = pp->rb_put + 1;
|
|
if (i >= RB_SIZE)
|
|
i = 0;
|
|
if (i != pp->rb_get) {
|
|
struct rb_entry *rp = &pp->rb_buf[pp->rb_put];
|
|
rp->len = len;
|
|
memcpy(rp->data, data, len);
|
|
pp->rb_put = i;
|
|
wake_up_interruptible(&pp->wait);
|
|
}
|
|
spin_unlock(&pp->lock);
|
|
}
|
|
spin_unlock_irqrestore(&all_pvt_lock, flags);
|
|
}
|
|
|
|
static int __pmac
|
|
pmu_open(struct inode *inode, struct file *file)
|
|
{
|
|
struct pmu_private *pp;
|
|
unsigned long flags;
|
|
|
|
pp = kmalloc(sizeof(struct pmu_private), GFP_KERNEL);
|
|
if (pp == 0)
|
|
return -ENOMEM;
|
|
pp->rb_get = pp->rb_put = 0;
|
|
spin_lock_init(&pp->lock);
|
|
init_waitqueue_head(&pp->wait);
|
|
spin_lock_irqsave(&all_pvt_lock, flags);
|
|
#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
|
|
pp->backlight_locker = 0;
|
|
#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */
|
|
list_add(&pp->list, &all_pmu_pvt);
|
|
spin_unlock_irqrestore(&all_pvt_lock, flags);
|
|
file->private_data = pp;
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t __pmac
|
|
pmu_read(struct file *file, char __user *buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
struct pmu_private *pp = file->private_data;
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
if (count < 1 || pp == 0)
|
|
return -EINVAL;
|
|
if (!access_ok(VERIFY_WRITE, buf, count))
|
|
return -EFAULT;
|
|
|
|
spin_lock_irqsave(&pp->lock, flags);
|
|
add_wait_queue(&pp->wait, &wait);
|
|
current->state = TASK_INTERRUPTIBLE;
|
|
|
|
for (;;) {
|
|
ret = -EAGAIN;
|
|
if (pp->rb_get != pp->rb_put) {
|
|
int i = pp->rb_get;
|
|
struct rb_entry *rp = &pp->rb_buf[i];
|
|
ret = rp->len;
|
|
spin_unlock_irqrestore(&pp->lock, flags);
|
|
if (ret > count)
|
|
ret = count;
|
|
if (ret > 0 && copy_to_user(buf, rp->data, ret))
|
|
ret = -EFAULT;
|
|
if (++i >= RB_SIZE)
|
|
i = 0;
|
|
spin_lock_irqsave(&pp->lock, flags);
|
|
pp->rb_get = i;
|
|
}
|
|
if (ret >= 0)
|
|
break;
|
|
if (file->f_flags & O_NONBLOCK)
|
|
break;
|
|
ret = -ERESTARTSYS;
|
|
if (signal_pending(current))
|
|
break;
|
|
spin_unlock_irqrestore(&pp->lock, flags);
|
|
schedule();
|
|
spin_lock_irqsave(&pp->lock, flags);
|
|
}
|
|
current->state = TASK_RUNNING;
|
|
remove_wait_queue(&pp->wait, &wait);
|
|
spin_unlock_irqrestore(&pp->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t __pmac
|
|
pmu_write(struct file *file, const char __user *buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int __pmac
|
|
pmu_fpoll(struct file *filp, poll_table *wait)
|
|
{
|
|
struct pmu_private *pp = filp->private_data;
|
|
unsigned int mask = 0;
|
|
unsigned long flags;
|
|
|
|
if (pp == 0)
|
|
return 0;
|
|
poll_wait(filp, &pp->wait, wait);
|
|
spin_lock_irqsave(&pp->lock, flags);
|
|
if (pp->rb_get != pp->rb_put)
|
|
mask |= POLLIN;
|
|
spin_unlock_irqrestore(&pp->lock, flags);
|
|
return mask;
|
|
}
|
|
|
|
static int __pmac
|
|
pmu_release(struct inode *inode, struct file *file)
|
|
{
|
|
struct pmu_private *pp = file->private_data;
|
|
unsigned long flags;
|
|
|
|
lock_kernel();
|
|
if (pp != 0) {
|
|
file->private_data = NULL;
|
|
spin_lock_irqsave(&all_pvt_lock, flags);
|
|
list_del(&pp->list);
|
|
spin_unlock_irqrestore(&all_pvt_lock, flags);
|
|
#if defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT)
|
|
if (pp->backlight_locker) {
|
|
spin_lock_irqsave(&pmu_lock, flags);
|
|
disable_kernel_backlight--;
|
|
spin_unlock_irqrestore(&pmu_lock, flags);
|
|
}
|
|
#endif /* defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_PMAC_BACKLIGHT) */
|
|
kfree(pp);
|
|
}
|
|
unlock_kernel();
|
|
return 0;
|
|
}
|
|
|
|
/* Note: removed __openfirmware here since it causes link errors */
|
|
static int __pmac
|
|
pmu_ioctl(struct inode * inode, struct file *filp,
|
|
u_int cmd, u_long arg)
|
|
{
|
|
struct pmu_private *pp = filp->private_data;
|
|
__u32 __user *argp = (__u32 __user *)arg;
|
|
int error;
|
|
|
|
switch (cmd) {
|
|
case PMU_IOC_SLEEP:
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
return -EACCES;
|
|
if (sleep_in_progress)
|
|
return -EBUSY;
|
|
sleep_in_progress = 1;
|
|
switch (pmu_kind) {
|
|
case PMU_OHARE_BASED:
|
|
error = powerbook_sleep_3400();
|
|
break;
|
|
case PMU_HEATHROW_BASED:
|
|
case PMU_PADDINGTON_BASED:
|
|
error = powerbook_sleep_grackle();
|
|
break;
|
|
case PMU_KEYLARGO_BASED:
|
|
error = powerbook_sleep_Core99();
|
|
break;
|
|
default:
|
|
error = -ENOSYS;
|
|
}
|
|
sleep_in_progress = 0;
|
|
return error;
|
|
case PMU_IOC_CAN_SLEEP:
|
|
if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0)
|
|
return put_user(0, argp);
|
|
else
|
|
return put_user(1, argp);
|
|
|
|
#ifdef CONFIG_PMAC_BACKLIGHT
|
|
/* Backlight should have its own device or go via
|
|
* the fbdev
|
|
*/
|
|
case PMU_IOC_GET_BACKLIGHT:
|
|
if (sleep_in_progress)
|
|
return -EBUSY;
|
|
error = get_backlight_level();
|
|
if (error < 0)
|
|
return error;
|
|
return put_user(error, argp);
|
|
case PMU_IOC_SET_BACKLIGHT:
|
|
{
|
|
__u32 value;
|
|
if (sleep_in_progress)
|
|
return -EBUSY;
|
|
error = get_user(value, argp);
|
|
if (!error)
|
|
error = set_backlight_level(value);
|
|
return error;
|
|
}
|
|
#ifdef CONFIG_INPUT_ADBHID
|
|
case PMU_IOC_GRAB_BACKLIGHT: {
|
|
unsigned long flags;
|
|
if (pp->backlight_locker)
|
|
return 0;
|
|
pp->backlight_locker = 1;
|
|
spin_lock_irqsave(&pmu_lock, flags);
|
|
disable_kernel_backlight++;
|
|
spin_unlock_irqrestore(&pmu_lock, flags);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_INPUT_ADBHID */
|
|
#endif /* CONFIG_PMAC_BACKLIGHT */
|
|
case PMU_IOC_GET_MODEL:
|
|
return put_user(pmu_kind, argp);
|
|
case PMU_IOC_HAS_ADB:
|
|
return put_user(pmu_has_adb, argp);
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static struct file_operations pmu_device_fops __pmacdata = {
|
|
.read = pmu_read,
|
|
.write = pmu_write,
|
|
.poll = pmu_fpoll,
|
|
.ioctl = pmu_ioctl,
|
|
.open = pmu_open,
|
|
.release = pmu_release,
|
|
};
|
|
|
|
static struct miscdevice pmu_device __pmacdata = {
|
|
PMU_MINOR, "pmu", &pmu_device_fops
|
|
};
|
|
|
|
void pmu_device_init(void)
|
|
{
|
|
if (!via)
|
|
return;
|
|
if (misc_register(&pmu_device) < 0)
|
|
printk(KERN_ERR "via-pmu: cannot register misc device.\n");
|
|
}
|
|
#endif /* CONFIG_PMAC_PBOOK */
|
|
|
|
#ifdef DEBUG_SLEEP
|
|
static inline void __pmac
|
|
polled_handshake(volatile unsigned char __iomem *via)
|
|
{
|
|
via[B] &= ~TREQ; eieio();
|
|
while ((via[B] & TACK) != 0)
|
|
;
|
|
via[B] |= TREQ; eieio();
|
|
while ((via[B] & TACK) == 0)
|
|
;
|
|
}
|
|
|
|
static inline void __pmac
|
|
polled_send_byte(volatile unsigned char __iomem *via, int x)
|
|
{
|
|
via[ACR] |= SR_OUT | SR_EXT; eieio();
|
|
via[SR] = x; eieio();
|
|
polled_handshake(via);
|
|
}
|
|
|
|
static inline int __pmac
|
|
polled_recv_byte(volatile unsigned char __iomem *via)
|
|
{
|
|
int x;
|
|
|
|
via[ACR] = (via[ACR] & ~SR_OUT) | SR_EXT; eieio();
|
|
x = via[SR]; eieio();
|
|
polled_handshake(via);
|
|
x = via[SR]; eieio();
|
|
return x;
|
|
}
|
|
|
|
int __pmac
|
|
pmu_polled_request(struct adb_request *req)
|
|
{
|
|
unsigned long flags;
|
|
int i, l, c;
|
|
volatile unsigned char __iomem *v = via;
|
|
|
|
req->complete = 1;
|
|
c = req->data[0];
|
|
l = pmu_data_len[c][0];
|
|
if (l >= 0 && req->nbytes != l + 1)
|
|
return -EINVAL;
|
|
|
|
local_irq_save(flags);
|
|
while (pmu_state != idle)
|
|
pmu_poll();
|
|
|
|
while ((via[B] & TACK) == 0)
|
|
;
|
|
polled_send_byte(v, c);
|
|
if (l < 0) {
|
|
l = req->nbytes - 1;
|
|
polled_send_byte(v, l);
|
|
}
|
|
for (i = 1; i <= l; ++i)
|
|
polled_send_byte(v, req->data[i]);
|
|
|
|
l = pmu_data_len[c][1];
|
|
if (l < 0)
|
|
l = polled_recv_byte(v);
|
|
for (i = 0; i < l; ++i)
|
|
req->reply[i + req->reply_len] = polled_recv_byte(v);
|
|
|
|
if (req->done)
|
|
(*req->done)(req);
|
|
|
|
local_irq_restore(flags);
|
|
return 0;
|
|
}
|
|
#endif /* DEBUG_SLEEP */
|
|
|
|
|
|
/* FIXME: This is a temporary set of callbacks to enable us
|
|
* to do suspend-to-disk.
|
|
*/
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int pmu_sys_suspended = 0;
|
|
|
|
static int pmu_sys_suspend(struct sys_device *sysdev, pm_message_t state)
|
|
{
|
|
if (state != PM_SUSPEND_DISK || pmu_sys_suspended)
|
|
return 0;
|
|
|
|
/* Suspend PMU event interrupts */
|
|
pmu_suspend();
|
|
|
|
pmu_sys_suspended = 1;
|
|
return 0;
|
|
}
|
|
|
|
static int pmu_sys_resume(struct sys_device *sysdev)
|
|
{
|
|
struct adb_request req;
|
|
|
|
if (!pmu_sys_suspended)
|
|
return 0;
|
|
|
|
/* Tell PMU we are ready */
|
|
pmu_request(&req, NULL, 2, PMU_SYSTEM_READY, 2);
|
|
pmu_wait_complete(&req);
|
|
|
|
/* Resume PMU event interrupts */
|
|
pmu_resume();
|
|
|
|
pmu_sys_suspended = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct sysdev_class pmu_sysclass = {
|
|
set_kset_name("pmu"),
|
|
};
|
|
|
|
static struct sys_device device_pmu = {
|
|
.id = 0,
|
|
.cls = &pmu_sysclass,
|
|
};
|
|
|
|
static struct sysdev_driver driver_pmu = {
|
|
#ifdef CONFIG_PM
|
|
.suspend = &pmu_sys_suspend,
|
|
.resume = &pmu_sys_resume,
|
|
#endif /* CONFIG_PM */
|
|
};
|
|
|
|
static int __init init_pmu_sysfs(void)
|
|
{
|
|
int rc;
|
|
|
|
rc = sysdev_class_register(&pmu_sysclass);
|
|
if (rc) {
|
|
printk(KERN_ERR "Failed registering PMU sys class\n");
|
|
return -ENODEV;
|
|
}
|
|
rc = sysdev_register(&device_pmu);
|
|
if (rc) {
|
|
printk(KERN_ERR "Failed registering PMU sys device\n");
|
|
return -ENODEV;
|
|
}
|
|
rc = sysdev_driver_register(&pmu_sysclass, &driver_pmu);
|
|
if (rc) {
|
|
printk(KERN_ERR "Failed registering PMU sys driver\n");
|
|
return -ENODEV;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
subsys_initcall(init_pmu_sysfs);
|
|
|
|
EXPORT_SYMBOL(pmu_request);
|
|
EXPORT_SYMBOL(pmu_poll);
|
|
EXPORT_SYMBOL(pmu_poll_adb);
|
|
EXPORT_SYMBOL(pmu_wait_complete);
|
|
EXPORT_SYMBOL(pmu_suspend);
|
|
EXPORT_SYMBOL(pmu_resume);
|
|
EXPORT_SYMBOL(pmu_unlock);
|
|
EXPORT_SYMBOL(pmu_i2c_combined_read);
|
|
EXPORT_SYMBOL(pmu_i2c_stdsub_write);
|
|
EXPORT_SYMBOL(pmu_i2c_simple_read);
|
|
EXPORT_SYMBOL(pmu_i2c_simple_write);
|
|
#ifdef CONFIG_PMAC_PBOOK
|
|
EXPORT_SYMBOL(pmu_register_sleep_notifier);
|
|
EXPORT_SYMBOL(pmu_unregister_sleep_notifier);
|
|
EXPORT_SYMBOL(pmu_enable_irled);
|
|
EXPORT_SYMBOL(pmu_battery_count);
|
|
EXPORT_SYMBOL(pmu_batteries);
|
|
EXPORT_SYMBOL(pmu_power_flags);
|
|
#endif /* CONFIG_PMAC_PBOOK */
|
|
|