![Mauro Carvalho Chehab](/assets/img/avatar_default.png)
Acked-by: Jarod Wilson <jarod@redhat.com> Reviewed-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
246 lines
6.5 KiB
C
246 lines
6.5 KiB
C
/*
|
|
* Driver for Feature Integration Technology Inc. (aka Fintek) LPC CIR
|
|
*
|
|
* Copyright (C) 2011 Jarod Wilson <jarod@redhat.com>
|
|
*
|
|
* Special thanks to Fintek for providing hardware and spec sheets.
|
|
* This driver is based upon the nuvoton, ite and ene drivers for
|
|
* similar hardware.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
|
|
* USA
|
|
*/
|
|
|
|
#include <linux/spinlock.h>
|
|
#include <linux/ioctl.h>
|
|
|
|
/* platform driver name to register */
|
|
#define FINTEK_DRIVER_NAME "fintek-cir"
|
|
#define FINTEK_DESCRIPTION "Fintek LPC SuperIO Consumer IR Transceiver"
|
|
#define VENDOR_ID_FINTEK 0x1934
|
|
|
|
|
|
/* debugging module parameter */
|
|
static int debug;
|
|
|
|
#define fit_pr(level, text, ...) \
|
|
printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__)
|
|
|
|
#define fit_dbg(text, ...) \
|
|
if (debug) \
|
|
printk(KERN_DEBUG \
|
|
KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
|
|
|
|
#define fit_dbg_verbose(text, ...) \
|
|
if (debug > 1) \
|
|
printk(KERN_DEBUG \
|
|
KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
|
|
|
|
#define fit_dbg_wake(text, ...) \
|
|
if (debug > 2) \
|
|
printk(KERN_DEBUG \
|
|
KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
|
|
|
|
|
|
#define TX_BUF_LEN 256
|
|
#define RX_BUF_LEN 32
|
|
|
|
struct fintek_dev {
|
|
struct pnp_dev *pdev;
|
|
struct rc_dev *rdev;
|
|
|
|
spinlock_t fintek_lock;
|
|
|
|
/* for rx */
|
|
u8 buf[RX_BUF_LEN];
|
|
unsigned int pkts;
|
|
|
|
struct {
|
|
spinlock_t lock;
|
|
u8 buf[TX_BUF_LEN];
|
|
unsigned int buf_count;
|
|
unsigned int cur_buf_num;
|
|
wait_queue_head_t queue;
|
|
} tx;
|
|
|
|
/* Config register index/data port pair */
|
|
u8 cr_ip;
|
|
u8 cr_dp;
|
|
|
|
/* hardware I/O settings */
|
|
unsigned long cir_addr;
|
|
int cir_irq;
|
|
int cir_port_len;
|
|
|
|
/* hardware id */
|
|
u8 chip_major;
|
|
u8 chip_minor;
|
|
u16 chip_vendor;
|
|
u8 logical_dev_cir;
|
|
|
|
/* hardware features */
|
|
bool hw_learning_capable;
|
|
bool hw_tx_capable;
|
|
|
|
/* rx settings */
|
|
bool learning_enabled;
|
|
bool carrier_detect_enabled;
|
|
|
|
enum {
|
|
CMD_HEADER = 0,
|
|
SUBCMD,
|
|
CMD_DATA,
|
|
PARSE_IRDATA,
|
|
} parser_state;
|
|
|
|
u8 cmd, rem;
|
|
|
|
/* carrier period = 1 / frequency */
|
|
u32 carrier;
|
|
};
|
|
|
|
/* buffer packet constants, largely identical to mceusb.c */
|
|
#define BUF_PULSE_BIT 0x80
|
|
#define BUF_LEN_MASK 0x1f
|
|
#define BUF_SAMPLE_MASK 0x7f
|
|
|
|
#define BUF_COMMAND_HEADER 0x9f
|
|
#define BUF_COMMAND_MASK 0xe0
|
|
#define BUF_COMMAND_NULL 0x00
|
|
#define BUF_HW_CMD_HEADER 0xff
|
|
#define BUF_CMD_G_REVISION 0x0b
|
|
#define BUF_CMD_S_CARRIER 0x06
|
|
#define BUF_CMD_S_TIMEOUT 0x0c
|
|
#define BUF_CMD_SIG_END 0x01
|
|
#define BUF_CMD_S_TXMASK 0x08
|
|
#define BUF_CMD_S_RXSENSOR 0x14
|
|
#define BUF_RSP_PULSE_COUNT 0x15
|
|
|
|
#define CIR_SAMPLE_PERIOD 50
|
|
|
|
/*
|
|
* Configuration Register:
|
|
* Index Port
|
|
* Data Port
|
|
*/
|
|
#define CR_INDEX_PORT 0x2e
|
|
#define CR_DATA_PORT 0x2f
|
|
|
|
/* Possible alternate values, depends on how the chip is wired */
|
|
#define CR_INDEX_PORT2 0x4e
|
|
#define CR_DATA_PORT2 0x4f
|
|
|
|
/*
|
|
* GCR_CONFIG_PORT_SEL bit 4 specifies which Index Port value is
|
|
* active. 1 = 0x4e, 0 = 0x2e
|
|
*/
|
|
#define PORT_SEL_PORT_4E_EN 0x10
|
|
|
|
/* Extended Function Mode enable/disable magic values */
|
|
#define CONFIG_REG_ENABLE 0x87
|
|
#define CONFIG_REG_DISABLE 0xaa
|
|
|
|
/* Chip IDs found in CR_CHIP_ID_{HI,LO} */
|
|
#define CHIP_ID_HIGH_F71809U 0x04
|
|
#define CHIP_ID_LOW_F71809U 0x08
|
|
|
|
/*
|
|
* Global control regs we need to care about:
|
|
* Global Control def.
|
|
* Register name addr val. */
|
|
#define GCR_SOFTWARE_RESET 0x02 /* 0x00 */
|
|
#define GCR_LOGICAL_DEV_NO 0x07 /* 0x00 */
|
|
#define GCR_CHIP_ID_HI 0x20 /* 0x04 */
|
|
#define GCR_CHIP_ID_LO 0x21 /* 0x08 */
|
|
#define GCR_VENDOR_ID_HI 0x23 /* 0x19 */
|
|
#define GCR_VENDOR_ID_LO 0x24 /* 0x34 */
|
|
#define GCR_CONFIG_PORT_SEL 0x25 /* 0x01 */
|
|
#define GCR_KBMOUSE_WAKEUP 0x27
|
|
|
|
#define LOGICAL_DEV_DISABLE 0x00
|
|
#define LOGICAL_DEV_ENABLE 0x01
|
|
|
|
/* Logical device number of the CIR function */
|
|
#define LOGICAL_DEV_CIR_REV1 0x05
|
|
#define LOGICAL_DEV_CIR_REV2 0x08
|
|
|
|
/* CIR Logical Device (LDN 0x08) config registers */
|
|
#define CIR_CR_COMMAND_INDEX 0x04
|
|
#define CIR_CR_IRCS 0x05 /* Before host writes command to IR, host
|
|
must set to 1. When host finshes write
|
|
command to IR, host must clear to 0. */
|
|
#define CIR_CR_COMMAND_DATA 0x06 /* Host read or write comand data */
|
|
#define CIR_CR_CLASS 0x07 /* 0xff = rx-only, 0x66 = rx + 2 tx,
|
|
0x33 = rx + 1 tx */
|
|
#define CIR_CR_DEV_EN 0x30 /* bit0 = 1 enables CIR */
|
|
#define CIR_CR_BASE_ADDR_HI 0x60 /* MSB of CIR IO base addr */
|
|
#define CIR_CR_BASE_ADDR_LO 0x61 /* LSB of CIR IO base addr */
|
|
#define CIR_CR_IRQ_SEL 0x70 /* bits3-0 store CIR IRQ */
|
|
#define CIR_CR_PSOUT_STATUS 0xf1
|
|
#define CIR_CR_WAKE_KEY3_ADDR 0xf8
|
|
#define CIR_CR_WAKE_KEY3_CODE 0xf9
|
|
#define CIR_CR_WAKE_KEY3_DC 0xfa
|
|
#define CIR_CR_WAKE_CONTROL 0xfb
|
|
#define CIR_CR_WAKE_KEY12_ADDR 0xfc
|
|
#define CIR_CR_WAKE_KEY4_ADDR 0xfd
|
|
#define CIR_CR_WAKE_KEY5_ADDR 0xfe
|
|
|
|
#define CLASS_RX_ONLY 0xff
|
|
#define CLASS_RX_2TX 0x66
|
|
#define CLASS_RX_1TX 0x33
|
|
|
|
/* CIR device registers */
|
|
#define CIR_STATUS 0x00
|
|
#define CIR_RX_DATA 0x01
|
|
#define CIR_TX_CONTROL 0x02
|
|
#define CIR_TX_DATA 0x03
|
|
#define CIR_CONTROL 0x04
|
|
|
|
/* Bits to enable CIR wake */
|
|
#define LOGICAL_DEV_ACPI 0x01
|
|
#define LDEV_ACPI_WAKE_EN_REG 0xe8
|
|
#define ACPI_WAKE_EN_CIR_BIT 0x04
|
|
|
|
#define LDEV_ACPI_PME_EN_REG 0xf0
|
|
#define LDEV_ACPI_PME_CLR_REG 0xf1
|
|
#define ACPI_PME_CIR_BIT 0x02
|
|
|
|
#define LDEV_ACPI_STATE_REG 0xf4
|
|
#define ACPI_STATE_CIR_BIT 0x20
|
|
|
|
/*
|
|
* CIR status register (0x00):
|
|
* 7 - CIR_IRQ_EN (1 = enable CIR IRQ, 0 = disable)
|
|
* 3 - TX_FINISH (1 when TX finished, write 1 to clear)
|
|
* 2 - TX_UNDERRUN (1 on TX underrun, write 1 to clear)
|
|
* 1 - RX_TIMEOUT (1 on RX timeout, write 1 to clear)
|
|
* 0 - RX_RECEIVE (1 on RX receive, write 1 to clear)
|
|
*/
|
|
#define CIR_STATUS_IRQ_EN 0x80
|
|
#define CIR_STATUS_TX_FINISH 0x08
|
|
#define CIR_STATUS_TX_UNDERRUN 0x04
|
|
#define CIR_STATUS_RX_TIMEOUT 0x02
|
|
#define CIR_STATUS_RX_RECEIVE 0x01
|
|
#define CIR_STATUS_IRQ_MASK 0x0f
|
|
|
|
/*
|
|
* CIR TX control register (0x02):
|
|
* 7 - TX_START (1 to indicate TX start, auto-cleared when done)
|
|
* 6 - TX_END (1 to indicate TX data written to TX fifo)
|
|
*/
|
|
#define CIR_TX_CONTROL_TX_START 0x80
|
|
#define CIR_TX_CONTROL_TX_END 0x40
|
|
|