redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/arm/mach-orion5x/rd88f5182-setup.c
Thomas Petazzoni 4ca2c04085 ARM: orion5x: Move to ID based window creation 
With the introduction of the ID based MBus API, it's better
to switch to use it instead of the current name based scheme.

This will allow to deprecate the name based API, once every
user is removed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-06 14:10:13 +00:00

291 lines
7.4 KiB
C
Raw Blame History

/*
* arch/arm/mach-orion5x/rd88f5182-setup.c
*
* Marvell Orion-NAS Reference Design Setup
*
* Maintainer: Ronen Shitrit <rshitrit@marvell.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/pci.h>
#include <linux/irq.h>
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
#include <linux/i2c.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
/*****************************************************************************
* RD-88F5182 Info
****************************************************************************/
/*
* 512K NOR flash Device bus boot chip select
*/
#define RD88F5182_NOR_BOOT_BASE 0xf4000000
#define RD88F5182_NOR_BOOT_SIZE SZ_512K
/*
* 16M NOR flash on Device bus chip select 1
*/
#define RD88F5182_NOR_BASE 0xfc000000
#define RD88F5182_NOR_SIZE SZ_16M
/*
* PCI
*/
#define RD88F5182_PCI_SLOT0_OFFS 7
#define RD88F5182_PCI_SLOT0_IRQ_A_PIN 7
#define RD88F5182_PCI_SLOT0_IRQ_B_PIN 6
/*****************************************************************************
* 16M NOR Flash on Device bus CS1
****************************************************************************/
static struct physmap_flash_data rd88f5182_nor_flash_data = {
.width = 1,
};
static struct resource rd88f5182_nor_flash_resource = {
.flags = IORESOURCE_MEM,
.start = RD88F5182_NOR_BASE,
.end = RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1,
};
static struct platform_device rd88f5182_nor_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &rd88f5182_nor_flash_data,
},
.num_resources = 1,
.resource = &rd88f5182_nor_flash_resource,
};
/*****************************************************************************
* Use GPIO LED as CPU active indication
****************************************************************************/
#define RD88F5182_GPIO_LED 0
static struct gpio_led rd88f5182_gpio_led_pins[] = {
{
.name = "rd88f5182:cpu",
.default_trigger = "cpu0",
.gpio = RD88F5182_GPIO_LED,
},
};
static struct gpio_led_platform_data rd88f5182_gpio_led_data = {
.leds = rd88f5182_gpio_led_pins,
.num_leds = ARRAY_SIZE(rd88f5182_gpio_led_pins),
};
static struct platform_device rd88f5182_gpio_leds = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &rd88f5182_gpio_led_data,
},
};
/*****************************************************************************
* PCI
****************************************************************************/
void __init rd88f5182_pci_preinit(void)
{
int pin;
/*
* Configure PCI GPIO IRQ pins
*/
pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
if (gpio_request(pin, "PCI IntA") == 0) {
if (gpio_direction_input(pin) == 0) {
irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else {
printk(KERN_ERR "rd88f5182_pci_preinit failed to "
"set_irq_type pin %d\n", pin);
gpio_free(pin);
}
} else {
printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
}
pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
if (gpio_request(pin, "PCI IntB") == 0) {
if (gpio_direction_input(pin) == 0) {
irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
} else {
printk(KERN_ERR "rd88f5182_pci_preinit failed to "
"set_irq_type pin %d\n", pin);
gpio_free(pin);
}
} else {
printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
}
}
static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot,
u8 pin)
{
int irq;
/*
* Check for devices with hard-wired IRQs.
*/
irq = orion5x_pci_map_irq(dev, slot, pin);
if (irq != -1)
return irq;
/*
* PCI IRQs are connected via GPIOs
*/
switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
case 0:
if (pin == 1)
return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
else
return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
default:
return -1;
}
}
static struct hw_pci rd88f5182_pci __initdata = {
.nr_controllers = 2,
.preinit = rd88f5182_pci_preinit,
.setup = orion5x_pci_sys_setup,
.scan = orion5x_pci_sys_scan_bus,
.map_irq = rd88f5182_pci_map_irq,
};
static int __init rd88f5182_pci_init(void)
{
if (machine_is_rd88f5182())
pci_common_init(&rd88f5182_pci);
return 0;
}
subsys_initcall(rd88f5182_pci_init);
/*****************************************************************************
* Ethernet
****************************************************************************/
static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
/*****************************************************************************
* RTC DS1338 on I2C bus
****************************************************************************/
static struct i2c_board_info __initdata rd88f5182_i2c_rtc = {
I2C_BOARD_INFO("ds1338", 0x68),
};
/*****************************************************************************
* Sata
****************************************************************************/
static struct mv_sata_platform_data rd88f5182_sata_data = {
.n_ports = 2,
};
/*****************************************************************************
* General Setup
****************************************************************************/
static unsigned int rd88f5182_mpp_modes[] __initdata = {
MPP0_GPIO, /* Debug Led */
MPP1_GPIO, /* Reset Switch */
MPP2_UNUSED,
MPP3_GPIO, /* RTC Int */
MPP4_GPIO,
MPP5_GPIO,
MPP6_GPIO, /* PCI_intA */
MPP7_GPIO, /* PCI_intB */
MPP8_UNUSED,
MPP9_UNUSED,
MPP10_UNUSED,
MPP11_UNUSED,
MPP12_SATA_LED, /* SATA 0 presence */
MPP13_SATA_LED, /* SATA 1 presence */
MPP14_SATA_LED, /* SATA 0 active */
MPP15_SATA_LED, /* SATA 1 active */
MPP16_UNUSED,
MPP17_UNUSED,
MPP18_UNUSED,
MPP19_UNUSED,
0,
};
static void __init rd88f5182_init(void)
{
/*
* Setup basic Orion functions. Need to be called early.
*/
orion5x_init();
orion5x_mpp_conf(rd88f5182_mpp_modes);
/*
* MPP[20] PCI Clock to MV88F5182
* MPP[21] PCI Clock to mini PCI CON11
* MPP[22] USB 0 over current indication
* MPP[23] USB 1 over current indication
* MPP[24] USB 1 over current enable
* MPP[25] USB 0 over current enable
*/
/*
* Configure peripherals.
*/
orion5x_ehci0_init();
orion5x_ehci1_init();
orion5x_eth_init(&rd88f5182_eth_data);
orion5x_i2c_init();
orion5x_sata_init(&rd88f5182_sata_data);
orion5x_uart0_init();
orion5x_xor_init();
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
ORION_MBUS_DEVBUS_BOOT_ATTR,
RD88F5182_NOR_BOOT_BASE,
RD88F5182_NOR_BOOT_SIZE);
mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
ORION_MBUS_DEVBUS_ATTR(1),
RD88F5182_NOR_BASE,
RD88F5182_NOR_SIZE);
platform_device_register(&rd88f5182_nor_flash);
platform_device_register(&rd88f5182_gpio_leds);
i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
}
MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
.atag_offset = 0x100,
.init_machine = rd88f5182_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
.init_irq = orion5x_init_irq,
.init_time = orion5x_timer_init,
.restart = orion5x_restart,
MACHINE_END
View git blame Copy permalink