![Rojhalat Ibrahim](/assets/img/avatar_default.png)
Up to now the PCIe link status on Freescale PCIe controllers was only checked once at boot time. So hotplug did not work. With this patch the link status is checked on every config read. PCIe devices not present at boot time are found after doing 'echo 1 >/sys/bus/pci/rescan'. Signed-off-by: Rojhalat Ibrahim <imr@rtschenk.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
171 lines
4.4 KiB
C
171 lines
4.4 KiB
C
/*
|
|
* Support for indirect PCI bridges.
|
|
*
|
|
* Copyright (C) 1998 Gabriel Paubert.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/string.h>
|
|
#include <linux/init.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/machdep.h>
|
|
|
|
int indirect_read_config(struct pci_bus *bus, unsigned int devfn,
|
|
int offset, int len, u32 *val)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_host(bus);
|
|
volatile void __iomem *cfg_data;
|
|
u8 cfg_type = 0;
|
|
u32 bus_no, reg;
|
|
|
|
if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) {
|
|
if (bus->number != hose->first_busno)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
if (devfn != 0)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
}
|
|
|
|
if (ppc_md.pci_exclude_device)
|
|
if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
if (hose->indirect_type & PPC_INDIRECT_TYPE_SET_CFG_TYPE)
|
|
if (bus->number != hose->first_busno)
|
|
cfg_type = 1;
|
|
|
|
bus_no = (bus->number == hose->first_busno) ?
|
|
hose->self_busno : bus->number;
|
|
|
|
if (hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG)
|
|
reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
|
|
else
|
|
reg = offset & 0xfc;
|
|
|
|
if (hose->indirect_type & PPC_INDIRECT_TYPE_BIG_ENDIAN)
|
|
out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
|
|
(devfn << 8) | reg | cfg_type));
|
|
else
|
|
out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
|
|
(devfn << 8) | reg | cfg_type));
|
|
|
|
/*
|
|
* Note: the caller has already checked that offset is
|
|
* suitably aligned and that len is 1, 2 or 4.
|
|
*/
|
|
cfg_data = hose->cfg_data + (offset & 3);
|
|
switch (len) {
|
|
case 1:
|
|
*val = in_8(cfg_data);
|
|
break;
|
|
case 2:
|
|
*val = in_le16(cfg_data);
|
|
break;
|
|
default:
|
|
*val = in_le32(cfg_data);
|
|
break;
|
|
}
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
int indirect_write_config(struct pci_bus *bus, unsigned int devfn,
|
|
int offset, int len, u32 val)
|
|
{
|
|
struct pci_controller *hose = pci_bus_to_host(bus);
|
|
volatile void __iomem *cfg_data;
|
|
u8 cfg_type = 0;
|
|
u32 bus_no, reg;
|
|
|
|
if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) {
|
|
if (bus->number != hose->first_busno)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
if (devfn != 0)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
}
|
|
|
|
if (ppc_md.pci_exclude_device)
|
|
if (ppc_md.pci_exclude_device(hose, bus->number, devfn))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
if (hose->indirect_type & PPC_INDIRECT_TYPE_SET_CFG_TYPE)
|
|
if (bus->number != hose->first_busno)
|
|
cfg_type = 1;
|
|
|
|
bus_no = (bus->number == hose->first_busno) ?
|
|
hose->self_busno : bus->number;
|
|
|
|
if (hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG)
|
|
reg = ((offset & 0xf00) << 16) | (offset & 0xfc);
|
|
else
|
|
reg = offset & 0xfc;
|
|
|
|
if (hose->indirect_type & PPC_INDIRECT_TYPE_BIG_ENDIAN)
|
|
out_be32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
|
|
(devfn << 8) | reg | cfg_type));
|
|
else
|
|
out_le32(hose->cfg_addr, (0x80000000 | (bus_no << 16) |
|
|
(devfn << 8) | reg | cfg_type));
|
|
|
|
/* suppress setting of PCI_PRIMARY_BUS */
|
|
if (hose->indirect_type & PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS)
|
|
if ((offset == PCI_PRIMARY_BUS) &&
|
|
(bus->number == hose->first_busno))
|
|
val &= 0xffffff00;
|
|
|
|
/* Workaround for PCI_28 Errata in 440EPx/GRx */
|
|
if ((hose->indirect_type & PPC_INDIRECT_TYPE_BROKEN_MRM) &&
|
|
offset == PCI_CACHE_LINE_SIZE) {
|
|
val = 0;
|
|
}
|
|
|
|
/*
|
|
* Note: the caller has already checked that offset is
|
|
* suitably aligned and that len is 1, 2 or 4.
|
|
*/
|
|
cfg_data = hose->cfg_data + (offset & 3);
|
|
switch (len) {
|
|
case 1:
|
|
out_8(cfg_data, val);
|
|
break;
|
|
case 2:
|
|
out_le16(cfg_data, val);
|
|
break;
|
|
default:
|
|
out_le32(cfg_data, val);
|
|
break;
|
|
}
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static struct pci_ops indirect_pci_ops =
|
|
{
|
|
.read = indirect_read_config,
|
|
.write = indirect_write_config,
|
|
};
|
|
|
|
void __init
|
|
setup_indirect_pci(struct pci_controller* hose,
|
|
resource_size_t cfg_addr,
|
|
resource_size_t cfg_data, u32 flags)
|
|
{
|
|
resource_size_t base = cfg_addr & PAGE_MASK;
|
|
void __iomem *mbase;
|
|
|
|
mbase = ioremap(base, PAGE_SIZE);
|
|
hose->cfg_addr = mbase + (cfg_addr & ~PAGE_MASK);
|
|
if ((cfg_data & PAGE_MASK) != base)
|
|
mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE);
|
|
hose->cfg_data = mbase + (cfg_data & ~PAGE_MASK);
|
|
hose->ops = &indirect_pci_ops;
|
|
hose->indirect_type = flags;
|
|
}
|