![Thomas Gleixner](/assets/img/avatar_default.png)
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
3659 lines
102 KiB
C
3659 lines
102 KiB
C
/*
|
|
* Intel i810 and friends ICH driver for Linux
|
|
* Alan Cox <alan@redhat.com>
|
|
*
|
|
* Built from:
|
|
* Low level code: Zach Brown (original nonworking i810 OSS driver)
|
|
* Jaroslav Kysela <perex@suse.cz> (working ALSA driver)
|
|
*
|
|
* Framework: Thomas Sailer <sailer@ife.ee.ethz.ch>
|
|
* Extended by: Zach Brown <zab@redhat.com>
|
|
* and others..
|
|
*
|
|
* Hardware Provided By:
|
|
* Analog Devices (A major AC97 codec maker)
|
|
* Intel Corp (you've probably heard of them already)
|
|
*
|
|
* AC97 clues and assistance provided by
|
|
* Analog Devices
|
|
* Zach 'Fufu' Brown
|
|
* Jeff Garzik
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* Intel 810 theory of operation
|
|
*
|
|
* The chipset provides three DMA channels that talk to an AC97
|
|
* CODEC (AC97 is a digital/analog mixer standard). At its simplest
|
|
* you get 48Khz audio with basic volume and mixer controls. At the
|
|
* best you get rate adaption in the codec. We set the card up so
|
|
* that we never take completion interrupts but instead keep the card
|
|
* chasing its tail around a ring buffer. This is needed for mmap
|
|
* mode audio and happens to work rather well for non-mmap modes too.
|
|
*
|
|
* The board has one output channel for PCM audio (supported) and
|
|
* a stereo line in and mono microphone input. Again these are normally
|
|
* locked to 48Khz only. Right now recording is not finished.
|
|
*
|
|
* There is no midi support, no synth support. Use timidity. To get
|
|
* esd working you need to use esd -r 48000 as it won't probe 48KHz
|
|
* by default. mpg123 can't handle 48Khz only audio so use xmms.
|
|
*
|
|
* Fix The Sound On Dell
|
|
*
|
|
* Not everyone uses 48KHz. We know of no way to detect this reliably
|
|
* and certainly not to get the right data. If your i810 audio sounds
|
|
* stupid you may need to investigate other speeds. According to Analog
|
|
* they tend to use a 14.318MHz clock which gives you a base rate of
|
|
* 41194Hz.
|
|
*
|
|
* This is available via the 'ftsodell=1' option.
|
|
*
|
|
* If you need to force a specific rate set the clocking= option
|
|
*
|
|
* This driver is cursed. (Ben LaHaise)
|
|
*
|
|
* ICH 3 caveats
|
|
* Intel errata #7 for ICH3 IO. We need to disable SMI stuff
|
|
* when codec probing. [Not Yet Done]
|
|
*
|
|
* ICH 4 caveats
|
|
*
|
|
* The ICH4 has the feature, that the codec ID doesn't have to be
|
|
* congruent with the IO connection.
|
|
*
|
|
* Therefore, from driver version 0.23 on, there is a "codec ID" <->
|
|
* "IO register base offset" mapping (card->ac97_id_map) field.
|
|
*
|
|
* Juergen "George" Sawinski (jsaw)
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/string.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sound.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/soundcard.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/interrupt.h>
|
|
#include <asm/io.h>
|
|
#include <asm/dma.h>
|
|
#include <linux/init.h>
|
|
#include <linux/poll.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/smp_lock.h>
|
|
#include <linux/ac97_codec.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/mutex.h>
|
|
|
|
#include <asm/uaccess.h>
|
|
|
|
#define DRIVER_VERSION "1.01"
|
|
|
|
#define MODULOP2(a, b) ((a) & ((b) - 1))
|
|
#define MASKP2(a, b) ((a) & ~((b) - 1))
|
|
|
|
static int ftsodell;
|
|
static int strict_clocking;
|
|
static unsigned int clocking;
|
|
static int spdif_locked;
|
|
static int ac97_quirk = AC97_TUNE_DEFAULT;
|
|
|
|
//#define DEBUG
|
|
//#define DEBUG2
|
|
//#define DEBUG_INTERRUPTS
|
|
//#define DEBUG_MMAP
|
|
//#define DEBUG_MMIO
|
|
|
|
#define ADC_RUNNING 1
|
|
#define DAC_RUNNING 2
|
|
|
|
#define I810_FMT_16BIT 1
|
|
#define I810_FMT_STEREO 2
|
|
#define I810_FMT_MASK 3
|
|
|
|
#define SPDIF_ON 0x0004
|
|
#define SURR_ON 0x0010
|
|
#define CENTER_LFE_ON 0x0020
|
|
#define VOL_MUTED 0x8000
|
|
|
|
/* the 810's array of pointers to data buffers */
|
|
|
|
struct sg_item {
|
|
#define BUSADDR_MASK 0xFFFFFFFE
|
|
u32 busaddr;
|
|
#define CON_IOC 0x80000000 /* interrupt on completion */
|
|
#define CON_BUFPAD 0x40000000 /* pad underrun with last sample, else 0 */
|
|
#define CON_BUFLEN_MASK 0x0000ffff /* buffer length in samples */
|
|
u32 control;
|
|
};
|
|
|
|
/* an instance of the i810 channel */
|
|
#define SG_LEN 32
|
|
struct i810_channel
|
|
{
|
|
/* these sg guys should probably be allocated
|
|
separately as nocache. Must be 8 byte aligned */
|
|
struct sg_item sg[SG_LEN]; /* 32*8 */
|
|
u32 offset; /* 4 */
|
|
u32 port; /* 4 */
|
|
u32 used;
|
|
u32 num;
|
|
};
|
|
|
|
/*
|
|
* we have 3 separate dma engines. pcm in, pcm out, and mic.
|
|
* each dma engine has controlling registers. These goofy
|
|
* names are from the datasheet, but make it easy to write
|
|
* code while leafing through it.
|
|
*
|
|
* ICH4 has 6 dma engines, pcm in, pcm out, mic, pcm in 2,
|
|
* mic in 2, s/pdif. Of special interest is the fact that
|
|
* the upper 3 DMA engines on the ICH4 *must* be accessed
|
|
* via mmio access instead of pio access.
|
|
*/
|
|
|
|
#define ENUM_ENGINE(PRE,DIG) \
|
|
enum { \
|
|
PRE##_BASE = 0x##DIG##0, /* Base Address */ \
|
|
PRE##_BDBAR = 0x##DIG##0, /* Buffer Descriptor list Base Address */ \
|
|
PRE##_CIV = 0x##DIG##4, /* Current Index Value */ \
|
|
PRE##_LVI = 0x##DIG##5, /* Last Valid Index */ \
|
|
PRE##_SR = 0x##DIG##6, /* Status Register */ \
|
|
PRE##_PICB = 0x##DIG##8, /* Position In Current Buffer */ \
|
|
PRE##_PIV = 0x##DIG##a, /* Prefetched Index Value */ \
|
|
PRE##_CR = 0x##DIG##b /* Control Register */ \
|
|
}
|
|
|
|
ENUM_ENGINE(OFF,0); /* Offsets */
|
|
ENUM_ENGINE(PI,0); /* PCM In */
|
|
ENUM_ENGINE(PO,1); /* PCM Out */
|
|
ENUM_ENGINE(MC,2); /* Mic In */
|
|
|
|
enum {
|
|
GLOB_CNT = 0x2c, /* Global Control */
|
|
GLOB_STA = 0x30, /* Global Status */
|
|
CAS = 0x34 /* Codec Write Semaphore Register */
|
|
};
|
|
|
|
ENUM_ENGINE(MC2,4); /* Mic In 2 */
|
|
ENUM_ENGINE(PI2,5); /* PCM In 2 */
|
|
ENUM_ENGINE(SP,6); /* S/PDIF */
|
|
|
|
enum {
|
|
SDM = 0x80 /* SDATA_IN Map Register */
|
|
};
|
|
|
|
/* interrupts for a dma engine */
|
|
#define DMA_INT_FIFO (1<<4) /* fifo under/over flow */
|
|
#define DMA_INT_COMPLETE (1<<3) /* buffer read/write complete and ioc set */
|
|
#define DMA_INT_LVI (1<<2) /* last valid done */
|
|
#define DMA_INT_CELV (1<<1) /* last valid is current */
|
|
#define DMA_INT_DCH (1) /* DMA Controller Halted (happens on LVI interrupts) */
|
|
#define DMA_INT_MASK (DMA_INT_FIFO|DMA_INT_COMPLETE|DMA_INT_LVI)
|
|
|
|
/* interrupts for the whole chip */
|
|
#define INT_SEC (1<<11)
|
|
#define INT_PRI (1<<10)
|
|
#define INT_MC (1<<7)
|
|
#define INT_PO (1<<6)
|
|
#define INT_PI (1<<5)
|
|
#define INT_MO (1<<2)
|
|
#define INT_NI (1<<1)
|
|
#define INT_GPI (1<<0)
|
|
#define INT_MASK (INT_SEC|INT_PRI|INT_MC|INT_PO|INT_PI|INT_MO|INT_NI|INT_GPI)
|
|
|
|
/* magic numbers to protect our data structures */
|
|
#define I810_CARD_MAGIC 0x5072696E /* "Prin" */
|
|
#define I810_STATE_MAGIC 0x63657373 /* "cess" */
|
|
#define I810_DMA_MASK 0xffffffff /* DMA buffer mask for pci_alloc_consist */
|
|
#define NR_HW_CH 3
|
|
|
|
/* maxinum number of AC97 codecs connected, AC97 2.0 defined 4 */
|
|
#define NR_AC97 4
|
|
|
|
/* Please note that an 8bit mono stream is not valid on this card, you must have a 16bit */
|
|
/* stream at a minimum for this card to be happy */
|
|
static const unsigned sample_size[] = { 1, 2, 2, 4 };
|
|
/* Samples are 16bit values, so we are shifting to a word, not to a byte, hence shift */
|
|
/* values are one less than might be expected */
|
|
static const unsigned sample_shift[] = { -1, 0, 0, 1 };
|
|
|
|
enum {
|
|
ICH82801AA = 0,
|
|
ICH82901AB,
|
|
INTEL440MX,
|
|
INTELICH2,
|
|
INTELICH3,
|
|
INTELICH4,
|
|
INTELICH5,
|
|
SI7012,
|
|
NVIDIA_NFORCE,
|
|
AMD768,
|
|
AMD8111
|
|
};
|
|
|
|
static char * card_names[] = {
|
|
"Intel ICH 82801AA",
|
|
"Intel ICH 82901AB",
|
|
"Intel 440MX",
|
|
"Intel ICH2",
|
|
"Intel ICH3",
|
|
"Intel ICH4",
|
|
"Intel ICH5",
|
|
"SiS 7012",
|
|
"NVIDIA nForce Audio",
|
|
"AMD 768",
|
|
"AMD-8111 IOHub"
|
|
};
|
|
|
|
/* These are capabilities (and bugs) the chipsets _can_ have */
|
|
static struct {
|
|
int16_t nr_ac97;
|
|
#define CAP_MMIO 0x0001
|
|
#define CAP_20BIT_AUDIO_SUPPORT 0x0002
|
|
u_int16_t flags;
|
|
} card_cap[] = {
|
|
{ 1, 0x0000 }, /* ICH82801AA */
|
|
{ 1, 0x0000 }, /* ICH82901AB */
|
|
{ 1, 0x0000 }, /* INTEL440MX */
|
|
{ 1, 0x0000 }, /* INTELICH2 */
|
|
{ 2, 0x0000 }, /* INTELICH3 */
|
|
{ 3, 0x0003 }, /* INTELICH4 */
|
|
{ 3, 0x0003 }, /* INTELICH5 */
|
|
/*@FIXME to be verified*/ { 2, 0x0000 }, /* SI7012 */
|
|
/*@FIXME to be verified*/ { 2, 0x0000 }, /* NVIDIA_NFORCE */
|
|
/*@FIXME to be verified*/ { 2, 0x0000 }, /* AMD768 */
|
|
/*@FIXME to be verified*/ { 3, 0x0001 }, /* AMD8111 */
|
|
};
|
|
|
|
static struct pci_device_id i810_pci_tbl [] = {
|
|
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_5,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, ICH82801AA},
|
|
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_5,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, ICH82901AB},
|
|
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_440MX,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTEL440MX},
|
|
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_4,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH2},
|
|
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_5,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH3},
|
|
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_5,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH4},
|
|
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_5,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH5},
|
|
{PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_7012,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, SI7012},
|
|
{PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_MCP1_AUDIO,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, NVIDIA_NFORCE},
|
|
{PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, NVIDIA_NFORCE},
|
|
{PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, NVIDIA_NFORCE},
|
|
{PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7445,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD768},
|
|
{PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_AUDIO,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, AMD8111},
|
|
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_5,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH4},
|
|
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_18,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, INTELICH4},
|
|
{PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_AUDIO,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, NVIDIA_NFORCE},
|
|
{0,}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE (pci, i810_pci_tbl);
|
|
|
|
#ifdef CONFIG_PM
|
|
#define PM_SUSPENDED(card) (card->pm_suspended)
|
|
#else
|
|
#define PM_SUSPENDED(card) (0)
|
|
#endif
|
|
|
|
/* "software" or virtual channel, an instance of opened /dev/dsp */
|
|
struct i810_state {
|
|
unsigned int magic;
|
|
struct i810_card *card; /* Card info */
|
|
|
|
/* single open lock mechanism, only used for recording */
|
|
struct mutex open_mutex;
|
|
wait_queue_head_t open_wait;
|
|
|
|
/* file mode */
|
|
mode_t open_mode;
|
|
|
|
/* virtual channel number */
|
|
int virt;
|
|
|
|
#ifdef CONFIG_PM
|
|
unsigned int pm_saved_dac_rate,pm_saved_adc_rate;
|
|
#endif
|
|
struct dmabuf {
|
|
/* wave sample stuff */
|
|
unsigned int rate;
|
|
unsigned char fmt, enable, trigger;
|
|
|
|
/* hardware channel */
|
|
struct i810_channel *read_channel;
|
|
struct i810_channel *write_channel;
|
|
|
|
/* OSS buffer management stuff */
|
|
void *rawbuf;
|
|
dma_addr_t dma_handle;
|
|
unsigned buforder;
|
|
unsigned numfrag;
|
|
unsigned fragshift;
|
|
|
|
/* our buffer acts like a circular ring */
|
|
unsigned hwptr; /* where dma last started, updated by update_ptr */
|
|
unsigned swptr; /* where driver last clear/filled, updated by read/write */
|
|
int count; /* bytes to be consumed or been generated by dma machine */
|
|
unsigned total_bytes; /* total bytes dmaed by hardware */
|
|
|
|
unsigned error; /* number of over/underruns */
|
|
wait_queue_head_t wait; /* put process on wait queue when no more space in buffer */
|
|
|
|
/* redundant, but makes calculations easier */
|
|
/* what the hardware uses */
|
|
unsigned dmasize;
|
|
unsigned fragsize;
|
|
unsigned fragsamples;
|
|
|
|
/* what we tell the user to expect */
|
|
unsigned userfrags;
|
|
unsigned userfragsize;
|
|
|
|
/* OSS stuff */
|
|
unsigned mapped:1;
|
|
unsigned ready:1;
|
|
unsigned update_flag;
|
|
unsigned ossfragsize;
|
|
unsigned ossmaxfrags;
|
|
unsigned subdivision;
|
|
} dmabuf;
|
|
};
|
|
|
|
|
|
struct i810_card {
|
|
unsigned int magic;
|
|
|
|
/* We keep i810 cards in a linked list */
|
|
struct i810_card *next;
|
|
|
|
/* The i810 has a certain amount of cross channel interaction
|
|
so we use a single per card lock */
|
|
spinlock_t lock;
|
|
|
|
/* Control AC97 access serialization */
|
|
spinlock_t ac97_lock;
|
|
|
|
/* PCI device stuff */
|
|
struct pci_dev * pci_dev;
|
|
u16 pci_id;
|
|
u16 pci_id_internal; /* used to access card_cap[] */
|
|
#ifdef CONFIG_PM
|
|
u16 pm_suspended;
|
|
int pm_saved_mixer_settings[SOUND_MIXER_NRDEVICES][NR_AC97];
|
|
#endif
|
|
/* soundcore stuff */
|
|
int dev_audio;
|
|
|
|
/* structures for abstraction of hardware facilities, codecs, banks and channels*/
|
|
u16 ac97_id_map[NR_AC97];
|
|
struct ac97_codec *ac97_codec[NR_AC97];
|
|
struct i810_state *states[NR_HW_CH];
|
|
struct i810_channel *channel; /* 1:1 to states[] but diff. lifetime */
|
|
dma_addr_t chandma;
|
|
|
|
u16 ac97_features;
|
|
u16 ac97_status;
|
|
u16 channels;
|
|
|
|
/* hardware resources */
|
|
unsigned long ac97base;
|
|
unsigned long iobase;
|
|
u32 irq;
|
|
|
|
unsigned long ac97base_mmio_phys;
|
|
unsigned long iobase_mmio_phys;
|
|
u_int8_t __iomem *ac97base_mmio;
|
|
u_int8_t __iomem *iobase_mmio;
|
|
|
|
int use_mmio;
|
|
|
|
/* Function support */
|
|
struct i810_channel *(*alloc_pcm_channel)(struct i810_card *);
|
|
struct i810_channel *(*alloc_rec_pcm_channel)(struct i810_card *);
|
|
struct i810_channel *(*alloc_rec_mic_channel)(struct i810_card *);
|
|
void (*free_pcm_channel)(struct i810_card *, int chan);
|
|
|
|
/* We have a *very* long init time possibly, so use this to block */
|
|
/* attempts to open our devices before we are ready (stops oops'es) */
|
|
int initializing;
|
|
};
|
|
|
|
/* extract register offset from codec struct */
|
|
#define IO_REG_OFF(codec) (((struct i810_card *) codec->private_data)->ac97_id_map[codec->id])
|
|
|
|
#define I810_IOREAD(size, type, card, off) \
|
|
({ \
|
|
type val; \
|
|
if (card->use_mmio) \
|
|
val=read##size(card->iobase_mmio+off); \
|
|
else \
|
|
val=in##size(card->iobase+off); \
|
|
val; \
|
|
})
|
|
|
|
#define I810_IOREADL(card, off) I810_IOREAD(l, u32, card, off)
|
|
#define I810_IOREADW(card, off) I810_IOREAD(w, u16, card, off)
|
|
#define I810_IOREADB(card, off) I810_IOREAD(b, u8, card, off)
|
|
|
|
#define I810_IOWRITE(size, val, card, off) \
|
|
({ \
|
|
if (card->use_mmio) \
|
|
write##size(val, card->iobase_mmio+off); \
|
|
else \
|
|
out##size(val, card->iobase+off); \
|
|
})
|
|
|
|
#define I810_IOWRITEL(val, card, off) I810_IOWRITE(l, val, card, off)
|
|
#define I810_IOWRITEW(val, card, off) I810_IOWRITE(w, val, card, off)
|
|
#define I810_IOWRITEB(val, card, off) I810_IOWRITE(b, val, card, off)
|
|
|
|
#define GET_CIV(card, port) MODULOP2(I810_IOREADB((card), (port) + OFF_CIV), SG_LEN)
|
|
#define GET_LVI(card, port) MODULOP2(I810_IOREADB((card), (port) + OFF_LVI), SG_LEN)
|
|
|
|
/* set LVI from CIV */
|
|
#define CIV_TO_LVI(card, port, off) \
|
|
I810_IOWRITEB(MODULOP2(GET_CIV((card), (port)) + (off), SG_LEN), (card), (port) + OFF_LVI)
|
|
|
|
static struct ac97_quirk ac97_quirks[] __devinitdata = {
|
|
{
|
|
.vendor = 0x0e11,
|
|
.device = 0x00b8,
|
|
.name = "Compaq Evo D510C",
|
|
.type = AC97_TUNE_HP_ONLY
|
|
},
|
|
{
|
|
.vendor = 0x1028,
|
|
.device = 0x00d8,
|
|
.name = "Dell Precision 530", /* AD1885 */
|
|
.type = AC97_TUNE_HP_ONLY
|
|
},
|
|
{
|
|
.vendor = 0x1028,
|
|
.device = 0x0126,
|
|
.name = "Dell Optiplex GX260", /* AD1981A */
|
|
.type = AC97_TUNE_HP_ONLY
|
|
},
|
|
{
|
|
.vendor = 0x1028,
|
|
.device = 0x012d,
|
|
.name = "Dell Precision 450", /* AD1981B*/
|
|
.type = AC97_TUNE_HP_ONLY
|
|
},
|
|
{ /* FIXME: which codec? */
|
|
.vendor = 0x103c,
|
|
.device = 0x00c3,
|
|
.name = "Hewlett-Packard onboard",
|
|
.type = AC97_TUNE_HP_ONLY
|
|
},
|
|
{
|
|
.vendor = 0x103c,
|
|
.device = 0x12f1,
|
|
.name = "HP xw8200", /* AD1981B*/
|
|
.type = AC97_TUNE_HP_ONLY
|
|
},
|
|
{
|
|
.vendor = 0x103c,
|
|
.device = 0x3008,
|
|
.name = "HP xw4200", /* AD1981B*/
|
|
.type = AC97_TUNE_HP_ONLY
|
|
},
|
|
{
|
|
.vendor = 0x10f1,
|
|
.device = 0x2665,
|
|
.name = "Fujitsu-Siemens Celsius", /* AD1981? */
|
|
.type = AC97_TUNE_HP_ONLY
|
|
},
|
|
{
|
|
.vendor = 0x10f1,
|
|
.device = 0x2885,
|
|
.name = "AMD64 Mobo", /* ALC650 */
|
|
.type = AC97_TUNE_HP_ONLY
|
|
},
|
|
{
|
|
.vendor = 0x110a,
|
|
.device = 0x0056,
|
|
.name = "Fujitsu-Siemens Scenic", /* AD1981? */
|
|
.type = AC97_TUNE_HP_ONLY
|
|
},
|
|
{
|
|
.vendor = 0x11d4,
|
|
.device = 0x5375,
|
|
.name = "ADI AD1985 (discrete)",
|
|
.type = AC97_TUNE_HP_ONLY
|
|
},
|
|
{
|
|
.vendor = 0x1462,
|
|
.device = 0x5470,
|
|
.name = "MSI P4 ATX 645 Ultra",
|
|
.type = AC97_TUNE_HP_ONLY
|
|
},
|
|
{
|
|
.vendor = 0x1734,
|
|
.device = 0x0088,
|
|
.name = "Fujitsu-Siemens D1522", /* AD1981 */
|
|
.type = AC97_TUNE_HP_ONLY
|
|
},
|
|
{
|
|
.vendor = 0x8086,
|
|
.device = 0x4856,
|
|
.name = "Intel D845WN (82801BA)",
|
|
.type = AC97_TUNE_SWAP_HP
|
|
},
|
|
{
|
|
.vendor = 0x8086,
|
|
.device = 0x4d44,
|
|
.name = "Intel D850EMV2", /* AD1885 */
|
|
.type = AC97_TUNE_HP_ONLY
|
|
},
|
|
{
|
|
.vendor = 0x8086,
|
|
.device = 0x4d56,
|
|
.name = "Intel ICH/AD1885",
|
|
.type = AC97_TUNE_HP_ONLY
|
|
},
|
|
{
|
|
.vendor = 0x1028,
|
|
.device = 0x012d,
|
|
.name = "Dell Precision 450", /* AD1981B*/
|
|
.type = AC97_TUNE_HP_ONLY
|
|
},
|
|
{
|
|
.vendor = 0x103c,
|
|
.device = 0x3008,
|
|
.name = "HP xw4200", /* AD1981B*/
|
|
.type = AC97_TUNE_HP_ONLY
|
|
},
|
|
{
|
|
.vendor = 0x103c,
|
|
.device = 0x12f1,
|
|
.name = "HP xw8200", /* AD1981B*/
|
|
.type = AC97_TUNE_HP_ONLY
|
|
},
|
|
{ } /* terminator */
|
|
};
|
|
|
|
static struct i810_card *devs = NULL;
|
|
|
|
static int i810_open_mixdev(struct inode *inode, struct file *file);
|
|
static int i810_ioctl_mixdev(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long arg);
|
|
static u16 i810_ac97_get(struct ac97_codec *dev, u8 reg);
|
|
static void i810_ac97_set(struct ac97_codec *dev, u8 reg, u16 data);
|
|
static u16 i810_ac97_get_mmio(struct ac97_codec *dev, u8 reg);
|
|
static void i810_ac97_set_mmio(struct ac97_codec *dev, u8 reg, u16 data);
|
|
static u16 i810_ac97_get_io(struct ac97_codec *dev, u8 reg);
|
|
static void i810_ac97_set_io(struct ac97_codec *dev, u8 reg, u16 data);
|
|
|
|
static struct i810_channel *i810_alloc_pcm_channel(struct i810_card *card)
|
|
{
|
|
if(card->channel[1].used==1)
|
|
return NULL;
|
|
card->channel[1].used=1;
|
|
return &card->channel[1];
|
|
}
|
|
|
|
static struct i810_channel *i810_alloc_rec_pcm_channel(struct i810_card *card)
|
|
{
|
|
if(card->channel[0].used==1)
|
|
return NULL;
|
|
card->channel[0].used=1;
|
|
return &card->channel[0];
|
|
}
|
|
|
|
static struct i810_channel *i810_alloc_rec_mic_channel(struct i810_card *card)
|
|
{
|
|
if(card->channel[2].used==1)
|
|
return NULL;
|
|
card->channel[2].used=1;
|
|
return &card->channel[2];
|
|
}
|
|
|
|
static void i810_free_pcm_channel(struct i810_card *card, int channel)
|
|
{
|
|
card->channel[channel].used=0;
|
|
}
|
|
|
|
static int i810_valid_spdif_rate ( struct ac97_codec *codec, int rate )
|
|
{
|
|
unsigned long id = 0L;
|
|
|
|
id = (i810_ac97_get(codec, AC97_VENDOR_ID1) << 16);
|
|
id |= i810_ac97_get(codec, AC97_VENDOR_ID2) & 0xffff;
|
|
#ifdef DEBUG
|
|
printk ( "i810_audio: codec = %s, codec_id = 0x%08lx\n", codec->name, id);
|
|
#endif
|
|
switch ( id ) {
|
|
case 0x41445361: /* AD1886 */
|
|
if (rate == 48000) {
|
|
return 1;
|
|
}
|
|
break;
|
|
default: /* all other codecs, until we know otherwiae */
|
|
if (rate == 48000 || rate == 44100 || rate == 32000) {
|
|
return 1;
|
|
}
|
|
break;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/* i810_set_spdif_output
|
|
*
|
|
* Configure the S/PDIF output transmitter. When we turn on
|
|
* S/PDIF, we turn off the analog output. This may not be
|
|
* the right thing to do.
|
|
*
|
|
* Assumptions:
|
|
* The DSP sample rate must already be set to a supported
|
|
* S/PDIF rate (32kHz, 44.1kHz, or 48kHz) or we abort.
|
|
*/
|
|
static int i810_set_spdif_output(struct i810_state *state, int slots, int rate)
|
|
{
|
|
int vol;
|
|
int aud_reg;
|
|
int r = 0;
|
|
struct ac97_codec *codec = state->card->ac97_codec[0];
|
|
|
|
if(!codec->codec_ops->digital) {
|
|
state->card->ac97_status &= ~SPDIF_ON;
|
|
} else {
|
|
if ( slots == -1 ) { /* Turn off S/PDIF */
|
|
codec->codec_ops->digital(codec, 0, 0, 0);
|
|
/* If the volume wasn't muted before we turned on S/PDIF, unmute it */
|
|
if ( !(state->card->ac97_status & VOL_MUTED) ) {
|
|
aud_reg = i810_ac97_get(codec, AC97_MASTER_VOL_STEREO);
|
|
i810_ac97_set(codec, AC97_MASTER_VOL_STEREO, (aud_reg & ~VOL_MUTED));
|
|
}
|
|
state->card->ac97_status &= ~(VOL_MUTED | SPDIF_ON);
|
|
return 0;
|
|
}
|
|
|
|
vol = i810_ac97_get(codec, AC97_MASTER_VOL_STEREO);
|
|
state->card->ac97_status = vol & VOL_MUTED;
|
|
|
|
r = codec->codec_ops->digital(codec, slots, rate, 0);
|
|
|
|
if(r)
|
|
state->card->ac97_status |= SPDIF_ON;
|
|
else
|
|
state->card->ac97_status &= ~SPDIF_ON;
|
|
|
|
/* Mute the analog output */
|
|
/* Should this only mute the PCM volume??? */
|
|
i810_ac97_set(codec, AC97_MASTER_VOL_STEREO, (vol | VOL_MUTED));
|
|
}
|
|
return r;
|
|
}
|
|
|
|
/* i810_set_dac_channels
|
|
*
|
|
* Configure the codec's multi-channel DACs
|
|
*
|
|
* The logic is backwards. Setting the bit to 1 turns off the DAC.
|
|
*
|
|
* What about the ICH? We currently configure it using the
|
|
* SNDCTL_DSP_CHANNELS ioctl. If we're turnning on the DAC,
|
|
* does that imply that we want the ICH set to support
|
|
* these channels?
|
|
*
|
|
* TODO:
|
|
* vailidate that the codec really supports these DACs
|
|
* before turning them on.
|
|
*/
|
|
static void i810_set_dac_channels(struct i810_state *state, int channel)
|
|
{
|
|
int aud_reg;
|
|
struct ac97_codec *codec = state->card->ac97_codec[0];
|
|
|
|
/* No codec, no setup */
|
|
|
|
if(codec == NULL)
|
|
return;
|
|
|
|
aud_reg = i810_ac97_get(codec, AC97_EXTENDED_STATUS);
|
|
aud_reg |= AC97_EA_PRI | AC97_EA_PRJ | AC97_EA_PRK;
|
|
state->card->ac97_status &= ~(SURR_ON | CENTER_LFE_ON);
|
|
|
|
switch ( channel ) {
|
|
case 2: /* always enabled */
|
|
break;
|
|
case 4:
|
|
aud_reg &= ~AC97_EA_PRJ;
|
|
state->card->ac97_status |= SURR_ON;
|
|
break;
|
|
case 6:
|
|
aud_reg &= ~(AC97_EA_PRJ | AC97_EA_PRI | AC97_EA_PRK);
|
|
state->card->ac97_status |= SURR_ON | CENTER_LFE_ON;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
i810_ac97_set(codec, AC97_EXTENDED_STATUS, aud_reg);
|
|
|
|
}
|
|
|
|
|
|
/* set playback sample rate */
|
|
static unsigned int i810_set_dac_rate(struct i810_state * state, unsigned int rate)
|
|
{
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
u32 new_rate;
|
|
struct ac97_codec *codec=state->card->ac97_codec[0];
|
|
|
|
if(!(state->card->ac97_features&0x0001))
|
|
{
|
|
dmabuf->rate = clocking;
|
|
#ifdef DEBUG
|
|
printk("Asked for %d Hz, but ac97_features says we only do %dHz. Sorry!\n",
|
|
rate,clocking);
|
|
#endif
|
|
return clocking;
|
|
}
|
|
|
|
if (rate > 48000)
|
|
rate = 48000;
|
|
if (rate < 8000)
|
|
rate = 8000;
|
|
dmabuf->rate = rate;
|
|
|
|
/*
|
|
* Adjust for misclocked crap
|
|
*/
|
|
rate = ( rate * clocking)/48000;
|
|
if(strict_clocking && rate < 8000) {
|
|
rate = 8000;
|
|
dmabuf->rate = (rate * 48000)/clocking;
|
|
}
|
|
|
|
new_rate=ac97_set_dac_rate(codec, rate);
|
|
if(new_rate != rate) {
|
|
dmabuf->rate = (new_rate * 48000)/clocking;
|
|
}
|
|
#ifdef DEBUG
|
|
printk("i810_audio: called i810_set_dac_rate : asked for %d, got %d\n", rate, dmabuf->rate);
|
|
#endif
|
|
rate = new_rate;
|
|
return dmabuf->rate;
|
|
}
|
|
|
|
/* set recording sample rate */
|
|
static unsigned int i810_set_adc_rate(struct i810_state * state, unsigned int rate)
|
|
{
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
u32 new_rate;
|
|
struct ac97_codec *codec=state->card->ac97_codec[0];
|
|
|
|
if(!(state->card->ac97_features&0x0001))
|
|
{
|
|
dmabuf->rate = clocking;
|
|
return clocking;
|
|
}
|
|
|
|
if (rate > 48000)
|
|
rate = 48000;
|
|
if (rate < 8000)
|
|
rate = 8000;
|
|
dmabuf->rate = rate;
|
|
|
|
/*
|
|
* Adjust for misclocked crap
|
|
*/
|
|
|
|
rate = ( rate * clocking)/48000;
|
|
if(strict_clocking && rate < 8000) {
|
|
rate = 8000;
|
|
dmabuf->rate = (rate * 48000)/clocking;
|
|
}
|
|
|
|
new_rate = ac97_set_adc_rate(codec, rate);
|
|
|
|
if(new_rate != rate) {
|
|
dmabuf->rate = (new_rate * 48000)/clocking;
|
|
rate = new_rate;
|
|
}
|
|
#ifdef DEBUG
|
|
printk("i810_audio: called i810_set_adc_rate : rate = %d/%d\n", dmabuf->rate, rate);
|
|
#endif
|
|
return dmabuf->rate;
|
|
}
|
|
|
|
/* get current playback/recording dma buffer pointer (byte offset from LBA),
|
|
called with spinlock held! */
|
|
|
|
static inline unsigned i810_get_dma_addr(struct i810_state *state, int rec)
|
|
{
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
unsigned int civ, offset, port, port_picb, bytes = 2;
|
|
|
|
if (!dmabuf->enable)
|
|
return 0;
|
|
|
|
if (rec)
|
|
port = dmabuf->read_channel->port;
|
|
else
|
|
port = dmabuf->write_channel->port;
|
|
|
|
if(state->card->pci_id == PCI_DEVICE_ID_SI_7012) {
|
|
port_picb = port + OFF_SR;
|
|
bytes = 1;
|
|
} else
|
|
port_picb = port + OFF_PICB;
|
|
|
|
do {
|
|
civ = GET_CIV(state->card, port);
|
|
offset = I810_IOREADW(state->card, port_picb);
|
|
/* Must have a delay here! */
|
|
if(offset == 0)
|
|
udelay(1);
|
|
/* Reread both registers and make sure that that total
|
|
* offset from the first reading to the second is 0.
|
|
* There is an issue with SiS hardware where it will count
|
|
* picb down to 0, then update civ to the next value,
|
|
* then set the new picb to fragsize bytes. We can catch
|
|
* it between the civ update and the picb update, making
|
|
* it look as though we are 1 fragsize ahead of where we
|
|
* are. The next to we get the address though, it will
|
|
* be back in the right place, and we will suddenly think
|
|
* we just went forward dmasize - fragsize bytes, causing
|
|
* totally stupid *huge* dma overrun messages. We are
|
|
* assuming that the 1us delay is more than long enough
|
|
* that we won't have to worry about the chip still being
|
|
* out of sync with reality ;-)
|
|
*/
|
|
} while (civ != GET_CIV(state->card, port) || offset != I810_IOREADW(state->card, port_picb));
|
|
|
|
return (((civ + 1) * dmabuf->fragsize - (bytes * offset))
|
|
% dmabuf->dmasize);
|
|
}
|
|
|
|
/* Stop recording (lock held) */
|
|
static inline void __stop_adc(struct i810_state *state)
|
|
{
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
struct i810_card *card = state->card;
|
|
|
|
dmabuf->enable &= ~ADC_RUNNING;
|
|
I810_IOWRITEB(0, card, PI_CR);
|
|
// wait for the card to acknowledge shutdown
|
|
while( I810_IOREADB(card, PI_CR) != 0 ) ;
|
|
// now clear any latent interrupt bits (like the halt bit)
|
|
if(card->pci_id == PCI_DEVICE_ID_SI_7012)
|
|
I810_IOWRITEB( I810_IOREADB(card, PI_PICB), card, PI_PICB );
|
|
else
|
|
I810_IOWRITEB( I810_IOREADB(card, PI_SR), card, PI_SR );
|
|
I810_IOWRITEL( I810_IOREADL(card, GLOB_STA) & INT_PI, card, GLOB_STA);
|
|
}
|
|
|
|
static void stop_adc(struct i810_state *state)
|
|
{
|
|
struct i810_card *card = state->card;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&card->lock, flags);
|
|
__stop_adc(state);
|
|
spin_unlock_irqrestore(&card->lock, flags);
|
|
}
|
|
|
|
static inline void __start_adc(struct i810_state *state)
|
|
{
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
|
|
if (dmabuf->count < dmabuf->dmasize && dmabuf->ready && !dmabuf->enable &&
|
|
(dmabuf->trigger & PCM_ENABLE_INPUT)) {
|
|
dmabuf->enable |= ADC_RUNNING;
|
|
// Interrupt enable, LVI enable, DMA enable
|
|
I810_IOWRITEB(0x10 | 0x04 | 0x01, state->card, PI_CR);
|
|
}
|
|
}
|
|
|
|
static void start_adc(struct i810_state *state)
|
|
{
|
|
struct i810_card *card = state->card;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&card->lock, flags);
|
|
__start_adc(state);
|
|
spin_unlock_irqrestore(&card->lock, flags);
|
|
}
|
|
|
|
/* stop playback (lock held) */
|
|
static inline void __stop_dac(struct i810_state *state)
|
|
{
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
struct i810_card *card = state->card;
|
|
|
|
dmabuf->enable &= ~DAC_RUNNING;
|
|
I810_IOWRITEB(0, card, PO_CR);
|
|
// wait for the card to acknowledge shutdown
|
|
while( I810_IOREADB(card, PO_CR) != 0 ) ;
|
|
// now clear any latent interrupt bits (like the halt bit)
|
|
if(card->pci_id == PCI_DEVICE_ID_SI_7012)
|
|
I810_IOWRITEB( I810_IOREADB(card, PO_PICB), card, PO_PICB );
|
|
else
|
|
I810_IOWRITEB( I810_IOREADB(card, PO_SR), card, PO_SR );
|
|
I810_IOWRITEL( I810_IOREADL(card, GLOB_STA) & INT_PO, card, GLOB_STA);
|
|
}
|
|
|
|
static void stop_dac(struct i810_state *state)
|
|
{
|
|
struct i810_card *card = state->card;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&card->lock, flags);
|
|
__stop_dac(state);
|
|
spin_unlock_irqrestore(&card->lock, flags);
|
|
}
|
|
|
|
static inline void __start_dac(struct i810_state *state)
|
|
{
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
|
|
if (dmabuf->count > 0 && dmabuf->ready && !dmabuf->enable &&
|
|
(dmabuf->trigger & PCM_ENABLE_OUTPUT)) {
|
|
dmabuf->enable |= DAC_RUNNING;
|
|
// Interrupt enable, LVI enable, DMA enable
|
|
I810_IOWRITEB(0x10 | 0x04 | 0x01, state->card, PO_CR);
|
|
}
|
|
}
|
|
static void start_dac(struct i810_state *state)
|
|
{
|
|
struct i810_card *card = state->card;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&card->lock, flags);
|
|
__start_dac(state);
|
|
spin_unlock_irqrestore(&card->lock, flags);
|
|
}
|
|
|
|
#define DMABUF_DEFAULTORDER (16-PAGE_SHIFT)
|
|
#define DMABUF_MINORDER 1
|
|
|
|
/* allocate DMA buffer, playback and recording buffer should be allocated separately */
|
|
static int alloc_dmabuf(struct i810_state *state)
|
|
{
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
void *rawbuf= NULL;
|
|
int order, size;
|
|
struct page *page, *pend;
|
|
|
|
/* If we don't have any oss frag params, then use our default ones */
|
|
if(dmabuf->ossmaxfrags == 0)
|
|
dmabuf->ossmaxfrags = 4;
|
|
if(dmabuf->ossfragsize == 0)
|
|
dmabuf->ossfragsize = (PAGE_SIZE<<DMABUF_DEFAULTORDER)/dmabuf->ossmaxfrags;
|
|
size = dmabuf->ossfragsize * dmabuf->ossmaxfrags;
|
|
|
|
if(dmabuf->rawbuf && (PAGE_SIZE << dmabuf->buforder) == size)
|
|
return 0;
|
|
/* alloc enough to satisfy the oss params */
|
|
for (order = DMABUF_DEFAULTORDER; order >= DMABUF_MINORDER; order--) {
|
|
if ( (PAGE_SIZE<<order) > size )
|
|
continue;
|
|
if ((rawbuf = pci_alloc_consistent(state->card->pci_dev,
|
|
PAGE_SIZE << order,
|
|
&dmabuf->dma_handle)))
|
|
break;
|
|
}
|
|
if (!rawbuf)
|
|
return -ENOMEM;
|
|
|
|
|
|
#ifdef DEBUG
|
|
printk("i810_audio: allocated %ld (order = %d) bytes at %p\n",
|
|
PAGE_SIZE << order, order, rawbuf);
|
|
#endif
|
|
|
|
dmabuf->ready = dmabuf->mapped = 0;
|
|
dmabuf->rawbuf = rawbuf;
|
|
dmabuf->buforder = order;
|
|
|
|
/* now mark the pages as reserved; otherwise remap_pfn_range doesn't do what we want */
|
|
pend = virt_to_page(rawbuf + (PAGE_SIZE << order) - 1);
|
|
for (page = virt_to_page(rawbuf); page <= pend; page++)
|
|
SetPageReserved(page);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* free DMA buffer */
|
|
static void dealloc_dmabuf(struct i810_state *state)
|
|
{
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
struct page *page, *pend;
|
|
|
|
if (dmabuf->rawbuf) {
|
|
/* undo marking the pages as reserved */
|
|
pend = virt_to_page(dmabuf->rawbuf + (PAGE_SIZE << dmabuf->buforder) - 1);
|
|
for (page = virt_to_page(dmabuf->rawbuf); page <= pend; page++)
|
|
ClearPageReserved(page);
|
|
pci_free_consistent(state->card->pci_dev, PAGE_SIZE << dmabuf->buforder,
|
|
dmabuf->rawbuf, dmabuf->dma_handle);
|
|
}
|
|
dmabuf->rawbuf = NULL;
|
|
dmabuf->mapped = dmabuf->ready = 0;
|
|
}
|
|
|
|
static int prog_dmabuf(struct i810_state *state, unsigned rec)
|
|
{
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
struct i810_channel *c;
|
|
struct sg_item *sg;
|
|
unsigned long flags;
|
|
int ret;
|
|
unsigned fragint;
|
|
int i;
|
|
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
if(dmabuf->enable & DAC_RUNNING)
|
|
__stop_dac(state);
|
|
if(dmabuf->enable & ADC_RUNNING)
|
|
__stop_adc(state);
|
|
dmabuf->total_bytes = 0;
|
|
dmabuf->count = dmabuf->error = 0;
|
|
dmabuf->swptr = dmabuf->hwptr = 0;
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
|
|
/* allocate DMA buffer, let alloc_dmabuf determine if we are already
|
|
* allocated well enough or if we should replace the current buffer
|
|
* (assuming one is already allocated, if it isn't, then allocate it).
|
|
*/
|
|
if ((ret = alloc_dmabuf(state)))
|
|
return ret;
|
|
|
|
/* FIXME: figure out all this OSS fragment stuff */
|
|
/* I did, it now does what it should according to the OSS API. DL */
|
|
/* We may not have realloced our dmabuf, but the fragment size to
|
|
* fragment number ratio may have changed, so go ahead and reprogram
|
|
* things
|
|
*/
|
|
dmabuf->dmasize = PAGE_SIZE << dmabuf->buforder;
|
|
dmabuf->numfrag = SG_LEN;
|
|
dmabuf->fragsize = dmabuf->dmasize/dmabuf->numfrag;
|
|
dmabuf->fragsamples = dmabuf->fragsize >> 1;
|
|
dmabuf->fragshift = ffs(dmabuf->fragsize) - 1;
|
|
dmabuf->userfragsize = dmabuf->ossfragsize;
|
|
dmabuf->userfrags = dmabuf->dmasize/dmabuf->ossfragsize;
|
|
|
|
memset(dmabuf->rawbuf, 0, dmabuf->dmasize);
|
|
|
|
if(dmabuf->ossmaxfrags == 4) {
|
|
fragint = 8;
|
|
} else if (dmabuf->ossmaxfrags == 8) {
|
|
fragint = 4;
|
|
} else if (dmabuf->ossmaxfrags == 16) {
|
|
fragint = 2;
|
|
} else {
|
|
fragint = 1;
|
|
}
|
|
/*
|
|
* Now set up the ring
|
|
*/
|
|
if(dmabuf->read_channel)
|
|
c = dmabuf->read_channel;
|
|
else
|
|
c = dmabuf->write_channel;
|
|
while(c != NULL) {
|
|
sg=&c->sg[0];
|
|
/*
|
|
* Load up 32 sg entries and take an interrupt at half
|
|
* way (we might want more interrupts later..)
|
|
*/
|
|
|
|
for(i=0;i<dmabuf->numfrag;i++)
|
|
{
|
|
sg->busaddr=(u32)dmabuf->dma_handle+dmabuf->fragsize*i;
|
|
// the card will always be doing 16bit stereo
|
|
sg->control=dmabuf->fragsamples;
|
|
if(state->card->pci_id == PCI_DEVICE_ID_SI_7012)
|
|
sg->control <<= 1;
|
|
sg->control|=CON_BUFPAD;
|
|
// set us up to get IOC interrupts as often as needed to
|
|
// satisfy numfrag requirements, no more
|
|
if( ((i+1) % fragint) == 0) {
|
|
sg->control|=CON_IOC;
|
|
}
|
|
sg++;
|
|
}
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
I810_IOWRITEB(2, state->card, c->port+OFF_CR); /* reset DMA machine */
|
|
while( I810_IOREADB(state->card, c->port+OFF_CR) & 0x02 ) ;
|
|
I810_IOWRITEL((u32)state->card->chandma +
|
|
c->num*sizeof(struct i810_channel),
|
|
state->card, c->port+OFF_BDBAR);
|
|
CIV_TO_LVI(state->card, c->port, 0);
|
|
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
|
|
if(c != dmabuf->write_channel)
|
|
c = dmabuf->write_channel;
|
|
else
|
|
c = NULL;
|
|
}
|
|
|
|
/* set the ready flag for the dma buffer */
|
|
dmabuf->ready = 1;
|
|
|
|
#ifdef DEBUG
|
|
printk("i810_audio: prog_dmabuf, sample rate = %d, format = %d,\n\tnumfrag = %d, "
|
|
"fragsize = %d dmasize = %d\n",
|
|
dmabuf->rate, dmabuf->fmt, dmabuf->numfrag,
|
|
dmabuf->fragsize, dmabuf->dmasize);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __i810_update_lvi(struct i810_state *state, int rec)
|
|
{
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
int x, port;
|
|
int trigger;
|
|
int count, fragsize;
|
|
void (*start)(struct i810_state *);
|
|
|
|
count = dmabuf->count;
|
|
if (rec) {
|
|
port = dmabuf->read_channel->port;
|
|
trigger = PCM_ENABLE_INPUT;
|
|
start = __start_adc;
|
|
count = dmabuf->dmasize - count;
|
|
} else {
|
|
port = dmabuf->write_channel->port;
|
|
trigger = PCM_ENABLE_OUTPUT;
|
|
start = __start_dac;
|
|
}
|
|
|
|
/* Do not process partial fragments. */
|
|
fragsize = dmabuf->fragsize;
|
|
if (count < fragsize)
|
|
return;
|
|
|
|
/* if we are currently stopped, then our CIV is actually set to our
|
|
* *last* sg segment and we are ready to wrap to the next. However,
|
|
* if we set our LVI to the last sg segment, then it won't wrap to
|
|
* the next sg segment, it won't even get a start. So, instead, when
|
|
* we are stopped, we set both the LVI value and also we increment
|
|
* the CIV value to the next sg segment to be played so that when
|
|
* we call start, things will operate properly. Since the CIV can't
|
|
* be written to directly for this purpose, we set the LVI to CIV + 1
|
|
* temporarily. Once the engine has started we set the LVI to its
|
|
* final value.
|
|
*/
|
|
if (!dmabuf->enable && dmabuf->ready) {
|
|
if (!(dmabuf->trigger & trigger))
|
|
return;
|
|
|
|
CIV_TO_LVI(state->card, port, 1);
|
|
|
|
start(state);
|
|
while (!(I810_IOREADB(state->card, port + OFF_CR) & ((1<<4) | (1<<2))))
|
|
;
|
|
}
|
|
|
|
/* MASKP2(swptr, fragsize) - 1 is the tail of our transfer */
|
|
x = MODULOP2(MASKP2(dmabuf->swptr, fragsize) - 1, dmabuf->dmasize);
|
|
x >>= dmabuf->fragshift;
|
|
I810_IOWRITEB(x, state->card, port + OFF_LVI);
|
|
}
|
|
|
|
static void i810_update_lvi(struct i810_state *state, int rec)
|
|
{
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
unsigned long flags;
|
|
|
|
if(!dmabuf->ready)
|
|
return;
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
__i810_update_lvi(state, rec);
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
}
|
|
|
|
/* update buffer manangement pointers, especially, dmabuf->count and dmabuf->hwptr */
|
|
static void i810_update_ptr(struct i810_state *state)
|
|
{
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
unsigned hwptr;
|
|
unsigned fragmask, dmamask;
|
|
int diff;
|
|
|
|
fragmask = MASKP2(~0, dmabuf->fragsize);
|
|
dmamask = MODULOP2(~0, dmabuf->dmasize);
|
|
|
|
/* error handling and process wake up for ADC */
|
|
if (dmabuf->enable == ADC_RUNNING) {
|
|
/* update hardware pointer */
|
|
hwptr = i810_get_dma_addr(state, 1) & fragmask;
|
|
diff = (hwptr - dmabuf->hwptr) & dmamask;
|
|
#if defined(DEBUG_INTERRUPTS) || defined(DEBUG_MMAP)
|
|
printk("ADC HWP %d,%d,%d\n", hwptr, dmabuf->hwptr, diff);
|
|
#endif
|
|
dmabuf->hwptr = hwptr;
|
|
dmabuf->total_bytes += diff;
|
|
dmabuf->count += diff;
|
|
if (dmabuf->count > dmabuf->dmasize) {
|
|
/* buffer underrun or buffer overrun */
|
|
/* this is normal for the end of a read */
|
|
/* only give an error if we went past the */
|
|
/* last valid sg entry */
|
|
if (GET_CIV(state->card, PI_BASE) !=
|
|
GET_LVI(state->card, PI_BASE)) {
|
|
printk(KERN_WARNING "i810_audio: DMA overrun on read\n");
|
|
dmabuf->error++;
|
|
}
|
|
}
|
|
if (diff)
|
|
wake_up(&dmabuf->wait);
|
|
}
|
|
/* error handling and process wake up for DAC */
|
|
if (dmabuf->enable == DAC_RUNNING) {
|
|
/* update hardware pointer */
|
|
hwptr = i810_get_dma_addr(state, 0) & fragmask;
|
|
diff = (hwptr - dmabuf->hwptr) & dmamask;
|
|
#if defined(DEBUG_INTERRUPTS) || defined(DEBUG_MMAP)
|
|
printk("DAC HWP %d,%d,%d\n", hwptr, dmabuf->hwptr, diff);
|
|
#endif
|
|
dmabuf->hwptr = hwptr;
|
|
dmabuf->total_bytes += diff;
|
|
dmabuf->count -= diff;
|
|
if (dmabuf->count < 0) {
|
|
/* buffer underrun or buffer overrun */
|
|
/* this is normal for the end of a write */
|
|
/* only give an error if we went past the */
|
|
/* last valid sg entry */
|
|
if (GET_CIV(state->card, PO_BASE) !=
|
|
GET_LVI(state->card, PO_BASE)) {
|
|
printk(KERN_WARNING "i810_audio: DMA overrun on write\n");
|
|
printk("i810_audio: CIV %d, LVI %d, hwptr %x, "
|
|
"count %d\n",
|
|
GET_CIV(state->card, PO_BASE),
|
|
GET_LVI(state->card, PO_BASE),
|
|
dmabuf->hwptr, dmabuf->count);
|
|
dmabuf->error++;
|
|
}
|
|
}
|
|
if (diff)
|
|
wake_up(&dmabuf->wait);
|
|
}
|
|
}
|
|
|
|
static inline int i810_get_free_write_space(struct i810_state *state)
|
|
{
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
int free;
|
|
|
|
i810_update_ptr(state);
|
|
// catch underruns during playback
|
|
if (dmabuf->count < 0) {
|
|
dmabuf->count = 0;
|
|
dmabuf->swptr = dmabuf->hwptr;
|
|
}
|
|
free = dmabuf->dmasize - dmabuf->count;
|
|
if(free < 0)
|
|
return(0);
|
|
return(free);
|
|
}
|
|
|
|
static inline int i810_get_available_read_data(struct i810_state *state)
|
|
{
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
int avail;
|
|
|
|
i810_update_ptr(state);
|
|
// catch overruns during record
|
|
if (dmabuf->count > dmabuf->dmasize) {
|
|
dmabuf->count = dmabuf->dmasize;
|
|
dmabuf->swptr = dmabuf->hwptr;
|
|
}
|
|
avail = dmabuf->count;
|
|
if(avail < 0)
|
|
return(0);
|
|
return(avail);
|
|
}
|
|
|
|
static inline void fill_partial_frag(struct dmabuf *dmabuf)
|
|
{
|
|
unsigned fragsize;
|
|
unsigned swptr, len;
|
|
|
|
fragsize = dmabuf->fragsize;
|
|
swptr = dmabuf->swptr;
|
|
len = fragsize - MODULOP2(dmabuf->swptr, fragsize);
|
|
if (len == fragsize)
|
|
return;
|
|
|
|
memset(dmabuf->rawbuf + swptr, '\0', len);
|
|
dmabuf->swptr = MODULOP2(swptr + len, dmabuf->dmasize);
|
|
dmabuf->count += len;
|
|
}
|
|
|
|
static int drain_dac(struct i810_state *state, int signals_allowed)
|
|
{
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
unsigned long flags;
|
|
unsigned long tmo;
|
|
int count;
|
|
|
|
if (!dmabuf->ready)
|
|
return 0;
|
|
if(dmabuf->mapped) {
|
|
stop_dac(state);
|
|
return 0;
|
|
}
|
|
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
|
|
fill_partial_frag(dmabuf);
|
|
|
|
/*
|
|
* This will make sure that our LVI is correct, that our
|
|
* pointer is updated, and that the DAC is running. We
|
|
* have to force the setting of dmabuf->trigger to avoid
|
|
* any possible deadlocks.
|
|
*/
|
|
dmabuf->trigger = PCM_ENABLE_OUTPUT;
|
|
__i810_update_lvi(state, 0);
|
|
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
|
|
add_wait_queue(&dmabuf->wait, &wait);
|
|
for (;;) {
|
|
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
i810_update_ptr(state);
|
|
count = dmabuf->count;
|
|
|
|
/* It seems that we have to set the current state to
|
|
* TASK_INTERRUPTIBLE every time to make the process
|
|
* really go to sleep. This also has to be *after* the
|
|
* update_ptr() call because update_ptr is likely to
|
|
* do a wake_up() which will unset this before we ever
|
|
* try to sleep, resuling in a tight loop in this code
|
|
* instead of actually sleeping and waiting for an
|
|
* interrupt to wake us up!
|
|
*/
|
|
__set_current_state(signals_allowed ?
|
|
TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
|
|
if (count <= 0)
|
|
break;
|
|
|
|
if (signal_pending(current) && signals_allowed) {
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* set the timeout to significantly longer than it *should*
|
|
* take for the DAC to drain the DMA buffer
|
|
*/
|
|
tmo = (count * HZ) / (dmabuf->rate);
|
|
if (!schedule_timeout(tmo >= 2 ? tmo : 2)){
|
|
printk(KERN_ERR "i810_audio: drain_dac, dma timeout?\n");
|
|
count = 0;
|
|
break;
|
|
}
|
|
}
|
|
set_current_state(TASK_RUNNING);
|
|
remove_wait_queue(&dmabuf->wait, &wait);
|
|
if(count > 0 && signal_pending(current) && signals_allowed)
|
|
return -ERESTARTSYS;
|
|
stop_dac(state);
|
|
return 0;
|
|
}
|
|
|
|
static void i810_channel_interrupt(struct i810_card *card)
|
|
{
|
|
int i, count;
|
|
|
|
#ifdef DEBUG_INTERRUPTS
|
|
printk("CHANNEL ");
|
|
#endif
|
|
for(i=0;i<NR_HW_CH;i++)
|
|
{
|
|
struct i810_state *state = card->states[i];
|
|
struct i810_channel *c;
|
|
struct dmabuf *dmabuf;
|
|
unsigned long port;
|
|
u16 status;
|
|
|
|
if(!state)
|
|
continue;
|
|
if(!state->dmabuf.ready)
|
|
continue;
|
|
dmabuf = &state->dmabuf;
|
|
if(dmabuf->enable & DAC_RUNNING) {
|
|
c=dmabuf->write_channel;
|
|
} else if(dmabuf->enable & ADC_RUNNING) {
|
|
c=dmabuf->read_channel;
|
|
} else /* This can occur going from R/W to close */
|
|
continue;
|
|
|
|
port = c->port;
|
|
|
|
if(card->pci_id == PCI_DEVICE_ID_SI_7012)
|
|
status = I810_IOREADW(card, port + OFF_PICB);
|
|
else
|
|
status = I810_IOREADW(card, port + OFF_SR);
|
|
|
|
#ifdef DEBUG_INTERRUPTS
|
|
printk("NUM %d PORT %X IRQ ( ST%d ", c->num, c->port, status);
|
|
#endif
|
|
if(status & DMA_INT_COMPLETE)
|
|
{
|
|
/* only wake_up() waiters if this interrupt signals
|
|
* us being beyond a userfragsize of data open or
|
|
* available, and i810_update_ptr() does that for
|
|
* us
|
|
*/
|
|
i810_update_ptr(state);
|
|
#ifdef DEBUG_INTERRUPTS
|
|
printk("COMP %d ", dmabuf->hwptr /
|
|
dmabuf->fragsize);
|
|
#endif
|
|
}
|
|
if(status & (DMA_INT_LVI | DMA_INT_DCH))
|
|
{
|
|
/* wake_up() unconditionally on LVI and DCH */
|
|
i810_update_ptr(state);
|
|
wake_up(&dmabuf->wait);
|
|
#ifdef DEBUG_INTERRUPTS
|
|
if(status & DMA_INT_LVI)
|
|
printk("LVI ");
|
|
if(status & DMA_INT_DCH)
|
|
printk("DCH -");
|
|
#endif
|
|
count = dmabuf->count;
|
|
if(dmabuf->enable & ADC_RUNNING)
|
|
count = dmabuf->dmasize - count;
|
|
if (count >= (int)dmabuf->fragsize) {
|
|
I810_IOWRITEB(I810_IOREADB(card, port+OFF_CR) | 1, card, port+OFF_CR);
|
|
#ifdef DEBUG_INTERRUPTS
|
|
printk(" CONTINUE ");
|
|
#endif
|
|
} else {
|
|
if (dmabuf->enable & DAC_RUNNING)
|
|
__stop_dac(state);
|
|
if (dmabuf->enable & ADC_RUNNING)
|
|
__stop_adc(state);
|
|
dmabuf->enable = 0;
|
|
#ifdef DEBUG_INTERRUPTS
|
|
printk(" STOP ");
|
|
#endif
|
|
}
|
|
}
|
|
if(card->pci_id == PCI_DEVICE_ID_SI_7012)
|
|
I810_IOWRITEW(status & DMA_INT_MASK, card, port + OFF_PICB);
|
|
else
|
|
I810_IOWRITEW(status & DMA_INT_MASK, card, port + OFF_SR);
|
|
}
|
|
#ifdef DEBUG_INTERRUPTS
|
|
printk(")\n");
|
|
#endif
|
|
}
|
|
|
|
static irqreturn_t i810_interrupt(int irq, void *dev_id, struct pt_regs *regs)
|
|
{
|
|
struct i810_card *card = (struct i810_card *)dev_id;
|
|
u32 status;
|
|
|
|
spin_lock(&card->lock);
|
|
|
|
status = I810_IOREADL(card, GLOB_STA);
|
|
|
|
if(!(status & INT_MASK))
|
|
{
|
|
spin_unlock(&card->lock);
|
|
return IRQ_NONE; /* not for us */
|
|
}
|
|
|
|
if(status & (INT_PO|INT_PI|INT_MC))
|
|
i810_channel_interrupt(card);
|
|
|
|
/* clear 'em */
|
|
I810_IOWRITEL(status & INT_MASK, card, GLOB_STA);
|
|
spin_unlock(&card->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* in this loop, dmabuf.count signifies the amount of data that is
|
|
waiting to be copied to the user's buffer. It is filled by the dma
|
|
machine and drained by this loop. */
|
|
|
|
static ssize_t i810_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
|
|
{
|
|
struct i810_state *state = (struct i810_state *)file->private_data;
|
|
struct i810_card *card=state ? state->card : NULL;
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
ssize_t ret;
|
|
unsigned long flags;
|
|
unsigned int swptr;
|
|
int cnt;
|
|
int pending;
|
|
DECLARE_WAITQUEUE(waita, current);
|
|
|
|
#ifdef DEBUG2
|
|
printk("i810_audio: i810_read called, count = %d\n", count);
|
|
#endif
|
|
|
|
if (dmabuf->mapped)
|
|
return -ENXIO;
|
|
if (dmabuf->enable & DAC_RUNNING)
|
|
return -ENODEV;
|
|
if (!dmabuf->read_channel) {
|
|
dmabuf->ready = 0;
|
|
dmabuf->read_channel = card->alloc_rec_pcm_channel(card);
|
|
if (!dmabuf->read_channel) {
|
|
return -EBUSY;
|
|
}
|
|
}
|
|
if (!dmabuf->ready && (ret = prog_dmabuf(state, 1)))
|
|
return ret;
|
|
if (!access_ok(VERIFY_WRITE, buffer, count))
|
|
return -EFAULT;
|
|
ret = 0;
|
|
|
|
pending = 0;
|
|
|
|
add_wait_queue(&dmabuf->wait, &waita);
|
|
while (count > 0) {
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
spin_lock_irqsave(&card->lock, flags);
|
|
if (PM_SUSPENDED(card)) {
|
|
spin_unlock_irqrestore(&card->lock, flags);
|
|
schedule();
|
|
if (signal_pending(current)) {
|
|
if (!ret) ret = -EAGAIN;
|
|
break;
|
|
}
|
|
continue;
|
|
}
|
|
cnt = i810_get_available_read_data(state);
|
|
swptr = dmabuf->swptr;
|
|
// this is to make the copy_to_user simpler below
|
|
if(cnt > (dmabuf->dmasize - swptr))
|
|
cnt = dmabuf->dmasize - swptr;
|
|
spin_unlock_irqrestore(&card->lock, flags);
|
|
|
|
if (cnt > count)
|
|
cnt = count;
|
|
if (cnt <= 0) {
|
|
unsigned long tmo;
|
|
/*
|
|
* Don't let us deadlock. The ADC won't start if
|
|
* dmabuf->trigger isn't set. A call to SETTRIGGER
|
|
* could have turned it off after we set it to on
|
|
* previously.
|
|
*/
|
|
dmabuf->trigger = PCM_ENABLE_INPUT;
|
|
/*
|
|
* This does three things. Updates LVI to be correct,
|
|
* makes sure the ADC is running, and updates the
|
|
* hwptr.
|
|
*/
|
|
i810_update_lvi(state,1);
|
|
if (file->f_flags & O_NONBLOCK) {
|
|
if (!ret) ret = -EAGAIN;
|
|
goto done;
|
|
}
|
|
/* Set the timeout to how long it would take to fill
|
|
* two of our buffers. If we haven't been woke up
|
|
* by then, then we know something is wrong.
|
|
*/
|
|
tmo = (dmabuf->dmasize * HZ * 2) / (dmabuf->rate * 4);
|
|
/* There are two situations when sleep_on_timeout returns, one is when
|
|
the interrupt is serviced correctly and the process is waked up by
|
|
ISR ON TIME. Another is when timeout is expired, which means that
|
|
either interrupt is NOT serviced correctly (pending interrupt) or it
|
|
is TOO LATE for the process to be scheduled to run (scheduler latency)
|
|
which results in a (potential) buffer overrun. And worse, there is
|
|
NOTHING we can do to prevent it. */
|
|
if (!schedule_timeout(tmo >= 2 ? tmo : 2)) {
|
|
#ifdef DEBUG
|
|
printk(KERN_ERR "i810_audio: recording schedule timeout, "
|
|
"dmasz %u fragsz %u count %i hwptr %u swptr %u\n",
|
|
dmabuf->dmasize, dmabuf->fragsize, dmabuf->count,
|
|
dmabuf->hwptr, dmabuf->swptr);
|
|
#endif
|
|
/* a buffer overrun, we delay the recovery until next time the
|
|
while loop begin and we REALLY have space to record */
|
|
}
|
|
if (signal_pending(current)) {
|
|
ret = ret ? ret : -ERESTARTSYS;
|
|
goto done;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
if (copy_to_user(buffer, dmabuf->rawbuf + swptr, cnt)) {
|
|
if (!ret) ret = -EFAULT;
|
|
goto done;
|
|
}
|
|
|
|
swptr = MODULOP2(swptr + cnt, dmabuf->dmasize);
|
|
|
|
spin_lock_irqsave(&card->lock, flags);
|
|
|
|
if (PM_SUSPENDED(card)) {
|
|
spin_unlock_irqrestore(&card->lock, flags);
|
|
continue;
|
|
}
|
|
dmabuf->swptr = swptr;
|
|
pending = dmabuf->count -= cnt;
|
|
spin_unlock_irqrestore(&card->lock, flags);
|
|
|
|
count -= cnt;
|
|
buffer += cnt;
|
|
ret += cnt;
|
|
}
|
|
done:
|
|
pending = dmabuf->dmasize - pending;
|
|
if (dmabuf->enable || pending >= dmabuf->userfragsize)
|
|
i810_update_lvi(state, 1);
|
|
set_current_state(TASK_RUNNING);
|
|
remove_wait_queue(&dmabuf->wait, &waita);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* in this loop, dmabuf.count signifies the amount of data that is waiting to be dma to
|
|
the soundcard. it is drained by the dma machine and filled by this loop. */
|
|
static ssize_t i810_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
|
|
{
|
|
struct i810_state *state = (struct i810_state *)file->private_data;
|
|
struct i810_card *card=state ? state->card : NULL;
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
ssize_t ret;
|
|
unsigned long flags;
|
|
unsigned int swptr = 0;
|
|
int pending;
|
|
int cnt;
|
|
DECLARE_WAITQUEUE(waita, current);
|
|
|
|
#ifdef DEBUG2
|
|
printk("i810_audio: i810_write called, count = %d\n", count);
|
|
#endif
|
|
|
|
if (dmabuf->mapped)
|
|
return -ENXIO;
|
|
if (dmabuf->enable & ADC_RUNNING)
|
|
return -ENODEV;
|
|
if (!dmabuf->write_channel) {
|
|
dmabuf->ready = 0;
|
|
dmabuf->write_channel = card->alloc_pcm_channel(card);
|
|
if(!dmabuf->write_channel)
|
|
return -EBUSY;
|
|
}
|
|
if (!dmabuf->ready && (ret = prog_dmabuf(state, 0)))
|
|
return ret;
|
|
if (!access_ok(VERIFY_READ, buffer, count))
|
|
return -EFAULT;
|
|
ret = 0;
|
|
|
|
pending = 0;
|
|
|
|
add_wait_queue(&dmabuf->wait, &waita);
|
|
while (count > 0) {
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
if (PM_SUSPENDED(card)) {
|
|
spin_unlock_irqrestore(&card->lock, flags);
|
|
schedule();
|
|
if (signal_pending(current)) {
|
|
if (!ret) ret = -EAGAIN;
|
|
break;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
cnt = i810_get_free_write_space(state);
|
|
swptr = dmabuf->swptr;
|
|
/* Bound the maximum size to how much we can copy to the
|
|
* dma buffer before we hit the end. If we have more to
|
|
* copy then it will get done in a second pass of this
|
|
* loop starting from the beginning of the buffer.
|
|
*/
|
|
if(cnt > (dmabuf->dmasize - swptr))
|
|
cnt = dmabuf->dmasize - swptr;
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
|
|
#ifdef DEBUG2
|
|
printk(KERN_INFO "i810_audio: i810_write: %d bytes available space\n", cnt);
|
|
#endif
|
|
if (cnt > count)
|
|
cnt = count;
|
|
if (cnt <= 0) {
|
|
unsigned long tmo;
|
|
// There is data waiting to be played
|
|
/*
|
|
* Force the trigger setting since we would
|
|
* deadlock with it set any other way
|
|
*/
|
|
dmabuf->trigger = PCM_ENABLE_OUTPUT;
|
|
i810_update_lvi(state,0);
|
|
if (file->f_flags & O_NONBLOCK) {
|
|
if (!ret) ret = -EAGAIN;
|
|
goto ret;
|
|
}
|
|
/* Not strictly correct but works */
|
|
tmo = (dmabuf->dmasize * HZ * 2) / (dmabuf->rate * 4);
|
|
/* There are two situations when sleep_on_timeout returns, one is when
|
|
the interrupt is serviced correctly and the process is waked up by
|
|
ISR ON TIME. Another is when timeout is expired, which means that
|
|
either interrupt is NOT serviced correctly (pending interrupt) or it
|
|
is TOO LATE for the process to be scheduled to run (scheduler latency)
|
|
which results in a (potential) buffer underrun. And worse, there is
|
|
NOTHING we can do to prevent it. */
|
|
if (!schedule_timeout(tmo >= 2 ? tmo : 2)) {
|
|
#ifdef DEBUG
|
|
printk(KERN_ERR "i810_audio: playback schedule timeout, "
|
|
"dmasz %u fragsz %u count %i hwptr %u swptr %u\n",
|
|
dmabuf->dmasize, dmabuf->fragsize, dmabuf->count,
|
|
dmabuf->hwptr, dmabuf->swptr);
|
|
#endif
|
|
/* a buffer underrun, we delay the recovery until next time the
|
|
while loop begin and we REALLY have data to play */
|
|
//return ret;
|
|
}
|
|
if (signal_pending(current)) {
|
|
if (!ret) ret = -ERESTARTSYS;
|
|
goto ret;
|
|
}
|
|
continue;
|
|
}
|
|
if (copy_from_user(dmabuf->rawbuf+swptr,buffer,cnt)) {
|
|
if (!ret) ret = -EFAULT;
|
|
goto ret;
|
|
}
|
|
|
|
swptr = MODULOP2(swptr + cnt, dmabuf->dmasize);
|
|
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
if (PM_SUSPENDED(card)) {
|
|
spin_unlock_irqrestore(&card->lock, flags);
|
|
continue;
|
|
}
|
|
|
|
dmabuf->swptr = swptr;
|
|
pending = dmabuf->count += cnt;
|
|
|
|
count -= cnt;
|
|
buffer += cnt;
|
|
ret += cnt;
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
}
|
|
ret:
|
|
if (dmabuf->enable || pending >= dmabuf->userfragsize)
|
|
i810_update_lvi(state, 0);
|
|
set_current_state(TASK_RUNNING);
|
|
remove_wait_queue(&dmabuf->wait, &waita);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* No kernel lock - we have our own spinlock */
|
|
static unsigned int i810_poll(struct file *file, struct poll_table_struct *wait)
|
|
{
|
|
struct i810_state *state = (struct i810_state *)file->private_data;
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
unsigned long flags;
|
|
unsigned int mask = 0;
|
|
|
|
if(!dmabuf->ready)
|
|
return 0;
|
|
poll_wait(file, &dmabuf->wait, wait);
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
if (dmabuf->enable & ADC_RUNNING ||
|
|
dmabuf->trigger & PCM_ENABLE_INPUT) {
|
|
if (i810_get_available_read_data(state) >=
|
|
(signed)dmabuf->userfragsize)
|
|
mask |= POLLIN | POLLRDNORM;
|
|
}
|
|
if (dmabuf->enable & DAC_RUNNING ||
|
|
dmabuf->trigger & PCM_ENABLE_OUTPUT) {
|
|
if (i810_get_free_write_space(state) >=
|
|
(signed)dmabuf->userfragsize)
|
|
mask |= POLLOUT | POLLWRNORM;
|
|
}
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
return mask;
|
|
}
|
|
|
|
static int i810_mmap(struct file *file, struct vm_area_struct *vma)
|
|
{
|
|
struct i810_state *state = (struct i810_state *)file->private_data;
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
int ret = -EINVAL;
|
|
unsigned long size;
|
|
|
|
lock_kernel();
|
|
if (vma->vm_flags & VM_WRITE) {
|
|
if (!dmabuf->write_channel &&
|
|
(dmabuf->write_channel =
|
|
state->card->alloc_pcm_channel(state->card)) == NULL) {
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
}
|
|
if (vma->vm_flags & VM_READ) {
|
|
if (!dmabuf->read_channel &&
|
|
(dmabuf->read_channel =
|
|
state->card->alloc_rec_pcm_channel(state->card)) == NULL) {
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
}
|
|
if ((ret = prog_dmabuf(state, 0)) != 0)
|
|
goto out;
|
|
|
|
ret = -EINVAL;
|
|
if (vma->vm_pgoff != 0)
|
|
goto out;
|
|
size = vma->vm_end - vma->vm_start;
|
|
if (size > (PAGE_SIZE << dmabuf->buforder))
|
|
goto out;
|
|
ret = -EAGAIN;
|
|
if (remap_pfn_range(vma, vma->vm_start,
|
|
virt_to_phys(dmabuf->rawbuf) >> PAGE_SHIFT,
|
|
size, vma->vm_page_prot))
|
|
goto out;
|
|
dmabuf->mapped = 1;
|
|
dmabuf->trigger = 0;
|
|
ret = 0;
|
|
#ifdef DEBUG_MMAP
|
|
printk("i810_audio: mmap'ed %ld bytes of data space\n", size);
|
|
#endif
|
|
out:
|
|
unlock_kernel();
|
|
return ret;
|
|
}
|
|
|
|
static int i810_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
|
|
{
|
|
struct i810_state *state = (struct i810_state *)file->private_data;
|
|
struct i810_channel *c = NULL;
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
unsigned long flags;
|
|
audio_buf_info abinfo;
|
|
count_info cinfo;
|
|
unsigned int i_glob_cnt;
|
|
int val = 0, ret;
|
|
struct ac97_codec *codec = state->card->ac97_codec[0];
|
|
void __user *argp = (void __user *)arg;
|
|
int __user *p = argp;
|
|
|
|
#ifdef DEBUG
|
|
printk("i810_audio: i810_ioctl, arg=0x%x, cmd=", arg ? *p : 0);
|
|
#endif
|
|
|
|
switch (cmd)
|
|
{
|
|
case OSS_GETVERSION:
|
|
#ifdef DEBUG
|
|
printk("OSS_GETVERSION\n");
|
|
#endif
|
|
return put_user(SOUND_VERSION, p);
|
|
|
|
case SNDCTL_DSP_RESET:
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_RESET\n");
|
|
#endif
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
if (dmabuf->enable == DAC_RUNNING) {
|
|
c = dmabuf->write_channel;
|
|
__stop_dac(state);
|
|
}
|
|
if (dmabuf->enable == ADC_RUNNING) {
|
|
c = dmabuf->read_channel;
|
|
__stop_adc(state);
|
|
}
|
|
if (c != NULL) {
|
|
I810_IOWRITEB(2, state->card, c->port+OFF_CR); /* reset DMA machine */
|
|
while ( I810_IOREADB(state->card, c->port+OFF_CR) & 2 )
|
|
cpu_relax();
|
|
I810_IOWRITEL((u32)state->card->chandma +
|
|
c->num*sizeof(struct i810_channel),
|
|
state->card, c->port+OFF_BDBAR);
|
|
CIV_TO_LVI(state->card, c->port, 0);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
synchronize_irq(state->card->pci_dev->irq);
|
|
dmabuf->ready = 0;
|
|
dmabuf->swptr = dmabuf->hwptr = 0;
|
|
dmabuf->count = dmabuf->total_bytes = 0;
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_SYNC:
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_SYNC\n");
|
|
#endif
|
|
if (dmabuf->enable != DAC_RUNNING || file->f_flags & O_NONBLOCK)
|
|
return 0;
|
|
if((val = drain_dac(state, 1)))
|
|
return val;
|
|
dmabuf->total_bytes = 0;
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_SPEED: /* set smaple rate */
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_SPEED\n");
|
|
#endif
|
|
if (get_user(val, p))
|
|
return -EFAULT;
|
|
if (val >= 0) {
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
if ( (state->card->ac97_status & SPDIF_ON) ) { /* S/PDIF Enabled */
|
|
/* AD1886 only supports 48000, need to check that */
|
|
if ( i810_valid_spdif_rate ( codec, val ) ) {
|
|
/* Set DAC rate */
|
|
i810_set_spdif_output ( state, -1, 0 );
|
|
stop_dac(state);
|
|
dmabuf->ready = 0;
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
i810_set_dac_rate(state, val);
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
/* Set S/PDIF transmitter rate. */
|
|
i810_set_spdif_output ( state, AC97_EA_SPSA_3_4, val );
|
|
if ( ! (state->card->ac97_status & SPDIF_ON) ) {
|
|
val = dmabuf->rate;
|
|
}
|
|
} else { /* Not a valid rate for S/PDIF, ignore it */
|
|
val = dmabuf->rate;
|
|
}
|
|
} else {
|
|
stop_dac(state);
|
|
dmabuf->ready = 0;
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
i810_set_dac_rate(state, val);
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
}
|
|
}
|
|
if (file->f_mode & FMODE_READ) {
|
|
stop_adc(state);
|
|
dmabuf->ready = 0;
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
i810_set_adc_rate(state, val);
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
}
|
|
}
|
|
return put_user(dmabuf->rate, p);
|
|
|
|
case SNDCTL_DSP_STEREO: /* set stereo or mono channel */
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_STEREO\n");
|
|
#endif
|
|
if (dmabuf->enable & DAC_RUNNING) {
|
|
stop_dac(state);
|
|
}
|
|
if (dmabuf->enable & ADC_RUNNING) {
|
|
stop_adc(state);
|
|
}
|
|
return put_user(1, p);
|
|
|
|
case SNDCTL_DSP_GETBLKSIZE:
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
if (!dmabuf->ready && (val = prog_dmabuf(state, 0)))
|
|
return val;
|
|
}
|
|
if (file->f_mode & FMODE_READ) {
|
|
if (!dmabuf->ready && (val = prog_dmabuf(state, 1)))
|
|
return val;
|
|
}
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_GETBLKSIZE %d\n", dmabuf->userfragsize);
|
|
#endif
|
|
return put_user(dmabuf->userfragsize, p);
|
|
|
|
case SNDCTL_DSP_GETFMTS: /* Returns a mask of supported sample format*/
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_GETFMTS\n");
|
|
#endif
|
|
return put_user(AFMT_S16_LE, p);
|
|
|
|
case SNDCTL_DSP_SETFMT: /* Select sample format */
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_SETFMT\n");
|
|
#endif
|
|
return put_user(AFMT_S16_LE, p);
|
|
|
|
case SNDCTL_DSP_CHANNELS:
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_CHANNELS\n");
|
|
#endif
|
|
if (get_user(val, p))
|
|
return -EFAULT;
|
|
|
|
if (val > 0) {
|
|
if (dmabuf->enable & DAC_RUNNING) {
|
|
stop_dac(state);
|
|
}
|
|
if (dmabuf->enable & ADC_RUNNING) {
|
|
stop_adc(state);
|
|
}
|
|
} else {
|
|
return put_user(state->card->channels, p);
|
|
}
|
|
|
|
/* ICH and ICH0 only support 2 channels */
|
|
if ( state->card->pci_id == PCI_DEVICE_ID_INTEL_82801AA_5
|
|
|| state->card->pci_id == PCI_DEVICE_ID_INTEL_82801AB_5)
|
|
return put_user(2, p);
|
|
|
|
/* Multi-channel support was added with ICH2. Bits in */
|
|
/* Global Status and Global Control register are now */
|
|
/* used to indicate this. */
|
|
|
|
i_glob_cnt = I810_IOREADL(state->card, GLOB_CNT);
|
|
|
|
/* Current # of channels enabled */
|
|
if ( i_glob_cnt & 0x0100000 )
|
|
ret = 4;
|
|
else if ( i_glob_cnt & 0x0200000 )
|
|
ret = 6;
|
|
else
|
|
ret = 2;
|
|
|
|
switch ( val ) {
|
|
case 2: /* 2 channels is always supported */
|
|
I810_IOWRITEL(i_glob_cnt & 0xffcfffff,
|
|
state->card, GLOB_CNT);
|
|
/* Do we need to change mixer settings???? */
|
|
break;
|
|
case 4: /* Supported on some chipsets, better check first */
|
|
if ( state->card->channels >= 4 ) {
|
|
I810_IOWRITEL((i_glob_cnt & 0xffcfffff) | 0x100000,
|
|
state->card, GLOB_CNT);
|
|
/* Do we need to change mixer settings??? */
|
|
} else {
|
|
val = ret;
|
|
}
|
|
break;
|
|
case 6: /* Supported on some chipsets, better check first */
|
|
if ( state->card->channels >= 6 ) {
|
|
I810_IOWRITEL((i_glob_cnt & 0xffcfffff) | 0x200000,
|
|
state->card, GLOB_CNT);
|
|
/* Do we need to change mixer settings??? */
|
|
} else {
|
|
val = ret;
|
|
}
|
|
break;
|
|
default: /* nothing else is ever supported by the chipset */
|
|
val = ret;
|
|
break;
|
|
}
|
|
|
|
return put_user(val, p);
|
|
|
|
case SNDCTL_DSP_POST: /* the user has sent all data and is notifying us */
|
|
/* we update the swptr to the end of the last sg segment then return */
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_POST\n");
|
|
#endif
|
|
if(!dmabuf->ready || (dmabuf->enable != DAC_RUNNING))
|
|
return 0;
|
|
if((dmabuf->swptr % dmabuf->fragsize) != 0) {
|
|
val = dmabuf->fragsize - (dmabuf->swptr % dmabuf->fragsize);
|
|
dmabuf->swptr += val;
|
|
dmabuf->count += val;
|
|
}
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_SUBDIVIDE:
|
|
if (dmabuf->subdivision)
|
|
return -EINVAL;
|
|
if (get_user(val, p))
|
|
return -EFAULT;
|
|
if (val != 1 && val != 2 && val != 4)
|
|
return -EINVAL;
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_SUBDIVIDE %d\n", val);
|
|
#endif
|
|
dmabuf->subdivision = val;
|
|
dmabuf->ready = 0;
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_SETFRAGMENT:
|
|
if (get_user(val, p))
|
|
return -EFAULT;
|
|
|
|
dmabuf->ossfragsize = 1<<(val & 0xffff);
|
|
dmabuf->ossmaxfrags = (val >> 16) & 0xffff;
|
|
if (!dmabuf->ossfragsize || !dmabuf->ossmaxfrags)
|
|
return -EINVAL;
|
|
/*
|
|
* Bound the frag size into our allowed range of 256 - 4096
|
|
*/
|
|
if (dmabuf->ossfragsize < 256)
|
|
dmabuf->ossfragsize = 256;
|
|
else if (dmabuf->ossfragsize > 4096)
|
|
dmabuf->ossfragsize = 4096;
|
|
/*
|
|
* The numfrags could be something reasonable, or it could
|
|
* be 0xffff meaning "Give me as much as possible". So,
|
|
* we check the numfrags * fragsize doesn't exceed our
|
|
* 64k buffer limit, nor is it less than our 8k minimum.
|
|
* If it fails either one of these checks, then adjust the
|
|
* number of fragments, not the size of them. It's OK if
|
|
* our number of fragments doesn't equal 32 or anything
|
|
* like our hardware based number now since we are using
|
|
* a different frag count for the hardware. Before we get
|
|
* into this though, bound the maxfrags to avoid overflow
|
|
* issues. A reasonable bound would be 64k / 256 since our
|
|
* maximum buffer size is 64k and our minimum frag size is
|
|
* 256. On the other end, our minimum buffer size is 8k and
|
|
* our maximum frag size is 4k, so the lower bound should
|
|
* be 2.
|
|
*/
|
|
|
|
if(dmabuf->ossmaxfrags > 256)
|
|
dmabuf->ossmaxfrags = 256;
|
|
else if (dmabuf->ossmaxfrags < 2)
|
|
dmabuf->ossmaxfrags = 2;
|
|
|
|
val = dmabuf->ossfragsize * dmabuf->ossmaxfrags;
|
|
while (val < 8192) {
|
|
val <<= 1;
|
|
dmabuf->ossmaxfrags <<= 1;
|
|
}
|
|
while (val > 65536) {
|
|
val >>= 1;
|
|
dmabuf->ossmaxfrags >>= 1;
|
|
}
|
|
dmabuf->ready = 0;
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_SETFRAGMENT 0x%x, %d, %d\n", val,
|
|
dmabuf->ossfragsize, dmabuf->ossmaxfrags);
|
|
#endif
|
|
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_GETOSPACE:
|
|
if (!(file->f_mode & FMODE_WRITE))
|
|
return -EINVAL;
|
|
if (!dmabuf->ready && (val = prog_dmabuf(state, 0)) != 0)
|
|
return val;
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
i810_update_ptr(state);
|
|
abinfo.fragsize = dmabuf->userfragsize;
|
|
abinfo.fragstotal = dmabuf->userfrags;
|
|
if (dmabuf->mapped)
|
|
abinfo.bytes = dmabuf->dmasize;
|
|
else
|
|
abinfo.bytes = i810_get_free_write_space(state);
|
|
abinfo.fragments = abinfo.bytes / dmabuf->userfragsize;
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
#if defined(DEBUG) || defined(DEBUG_MMAP)
|
|
printk("SNDCTL_DSP_GETOSPACE %d, %d, %d, %d\n", abinfo.bytes,
|
|
abinfo.fragsize, abinfo.fragments, abinfo.fragstotal);
|
|
#endif
|
|
return copy_to_user(argp, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
|
|
|
|
case SNDCTL_DSP_GETOPTR:
|
|
if (!(file->f_mode & FMODE_WRITE))
|
|
return -EINVAL;
|
|
if (!dmabuf->ready && (val = prog_dmabuf(state, 0)) != 0)
|
|
return val;
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
val = i810_get_free_write_space(state);
|
|
cinfo.bytes = dmabuf->total_bytes;
|
|
cinfo.ptr = dmabuf->hwptr;
|
|
cinfo.blocks = val/dmabuf->userfragsize;
|
|
if (dmabuf->mapped && (dmabuf->trigger & PCM_ENABLE_OUTPUT)) {
|
|
dmabuf->count += val;
|
|
dmabuf->swptr = (dmabuf->swptr + val) % dmabuf->dmasize;
|
|
__i810_update_lvi(state, 0);
|
|
}
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
#if defined(DEBUG) || defined(DEBUG_MMAP)
|
|
printk("SNDCTL_DSP_GETOPTR %d, %d, %d, %d\n", cinfo.bytes,
|
|
cinfo.blocks, cinfo.ptr, dmabuf->count);
|
|
#endif
|
|
return copy_to_user(argp, &cinfo, sizeof(cinfo)) ? -EFAULT : 0;
|
|
|
|
case SNDCTL_DSP_GETISPACE:
|
|
if (!(file->f_mode & FMODE_READ))
|
|
return -EINVAL;
|
|
if (!dmabuf->ready && (val = prog_dmabuf(state, 1)) != 0)
|
|
return val;
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
abinfo.bytes = i810_get_available_read_data(state);
|
|
abinfo.fragsize = dmabuf->userfragsize;
|
|
abinfo.fragstotal = dmabuf->userfrags;
|
|
abinfo.fragments = abinfo.bytes / dmabuf->userfragsize;
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
#if defined(DEBUG) || defined(DEBUG_MMAP)
|
|
printk("SNDCTL_DSP_GETISPACE %d, %d, %d, %d\n", abinfo.bytes,
|
|
abinfo.fragsize, abinfo.fragments, abinfo.fragstotal);
|
|
#endif
|
|
return copy_to_user(argp, &abinfo, sizeof(abinfo)) ? -EFAULT : 0;
|
|
|
|
case SNDCTL_DSP_GETIPTR:
|
|
if (!(file->f_mode & FMODE_READ))
|
|
return -EINVAL;
|
|
if (!dmabuf->ready && (val = prog_dmabuf(state, 0)) != 0)
|
|
return val;
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
val = i810_get_available_read_data(state);
|
|
cinfo.bytes = dmabuf->total_bytes;
|
|
cinfo.blocks = val/dmabuf->userfragsize;
|
|
cinfo.ptr = dmabuf->hwptr;
|
|
if (dmabuf->mapped && (dmabuf->trigger & PCM_ENABLE_INPUT)) {
|
|
dmabuf->count -= val;
|
|
dmabuf->swptr = (dmabuf->swptr + val) % dmabuf->dmasize;
|
|
__i810_update_lvi(state, 1);
|
|
}
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
#if defined(DEBUG) || defined(DEBUG_MMAP)
|
|
printk("SNDCTL_DSP_GETIPTR %d, %d, %d, %d\n", cinfo.bytes,
|
|
cinfo.blocks, cinfo.ptr, dmabuf->count);
|
|
#endif
|
|
return copy_to_user(argp, &cinfo, sizeof(cinfo)) ? -EFAULT : 0;
|
|
|
|
case SNDCTL_DSP_NONBLOCK:
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_NONBLOCK\n");
|
|
#endif
|
|
file->f_flags |= O_NONBLOCK;
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_GETCAPS:
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_GETCAPS\n");
|
|
#endif
|
|
return put_user(DSP_CAP_REALTIME|DSP_CAP_TRIGGER|DSP_CAP_MMAP|DSP_CAP_BIND,
|
|
p);
|
|
|
|
case SNDCTL_DSP_GETTRIGGER:
|
|
val = 0;
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_GETTRIGGER 0x%x\n", dmabuf->trigger);
|
|
#endif
|
|
return put_user(dmabuf->trigger, p);
|
|
|
|
case SNDCTL_DSP_SETTRIGGER:
|
|
if (get_user(val, p))
|
|
return -EFAULT;
|
|
#if defined(DEBUG) || defined(DEBUG_MMAP)
|
|
printk("SNDCTL_DSP_SETTRIGGER 0x%x\n", val);
|
|
#endif
|
|
/* silently ignore invalid PCM_ENABLE_xxx bits,
|
|
* like the other drivers do
|
|
*/
|
|
if (!(file->f_mode & FMODE_READ ))
|
|
val &= ~PCM_ENABLE_INPUT;
|
|
if (!(file->f_mode & FMODE_WRITE ))
|
|
val &= ~PCM_ENABLE_OUTPUT;
|
|
if((file->f_mode & FMODE_READ) && !(val & PCM_ENABLE_INPUT) && dmabuf->enable == ADC_RUNNING) {
|
|
stop_adc(state);
|
|
}
|
|
if((file->f_mode & FMODE_WRITE) && !(val & PCM_ENABLE_OUTPUT) && dmabuf->enable == DAC_RUNNING) {
|
|
stop_dac(state);
|
|
}
|
|
dmabuf->trigger = val;
|
|
if((val & PCM_ENABLE_OUTPUT) && !(dmabuf->enable & DAC_RUNNING)) {
|
|
if (!dmabuf->write_channel) {
|
|
dmabuf->ready = 0;
|
|
dmabuf->write_channel = state->card->alloc_pcm_channel(state->card);
|
|
if (!dmabuf->write_channel)
|
|
return -EBUSY;
|
|
}
|
|
if (!dmabuf->ready && (ret = prog_dmabuf(state, 0)))
|
|
return ret;
|
|
if (dmabuf->mapped) {
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
i810_update_ptr(state);
|
|
dmabuf->count = 0;
|
|
dmabuf->swptr = dmabuf->hwptr;
|
|
dmabuf->count = i810_get_free_write_space(state);
|
|
dmabuf->swptr = (dmabuf->swptr + dmabuf->count) % dmabuf->dmasize;
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
}
|
|
i810_update_lvi(state, 0);
|
|
start_dac(state);
|
|
}
|
|
if((val & PCM_ENABLE_INPUT) && !(dmabuf->enable & ADC_RUNNING)) {
|
|
if (!dmabuf->read_channel) {
|
|
dmabuf->ready = 0;
|
|
dmabuf->read_channel = state->card->alloc_rec_pcm_channel(state->card);
|
|
if (!dmabuf->read_channel)
|
|
return -EBUSY;
|
|
}
|
|
if (!dmabuf->ready && (ret = prog_dmabuf(state, 1)))
|
|
return ret;
|
|
if (dmabuf->mapped) {
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
i810_update_ptr(state);
|
|
dmabuf->swptr = dmabuf->hwptr;
|
|
dmabuf->count = 0;
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
}
|
|
i810_update_lvi(state, 1);
|
|
start_adc(state);
|
|
}
|
|
return 0;
|
|
|
|
case SNDCTL_DSP_SETDUPLEX:
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_SETDUPLEX\n");
|
|
#endif
|
|
return -EINVAL;
|
|
|
|
case SNDCTL_DSP_GETODELAY:
|
|
if (!(file->f_mode & FMODE_WRITE))
|
|
return -EINVAL;
|
|
spin_lock_irqsave(&state->card->lock, flags);
|
|
i810_update_ptr(state);
|
|
val = dmabuf->count;
|
|
spin_unlock_irqrestore(&state->card->lock, flags);
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_GETODELAY %d\n", dmabuf->count);
|
|
#endif
|
|
return put_user(val, p);
|
|
|
|
case SOUND_PCM_READ_RATE:
|
|
#ifdef DEBUG
|
|
printk("SOUND_PCM_READ_RATE %d\n", dmabuf->rate);
|
|
#endif
|
|
return put_user(dmabuf->rate, p);
|
|
|
|
case SOUND_PCM_READ_CHANNELS:
|
|
#ifdef DEBUG
|
|
printk("SOUND_PCM_READ_CHANNELS\n");
|
|
#endif
|
|
return put_user(2, p);
|
|
|
|
case SOUND_PCM_READ_BITS:
|
|
#ifdef DEBUG
|
|
printk("SOUND_PCM_READ_BITS\n");
|
|
#endif
|
|
return put_user(AFMT_S16_LE, p);
|
|
|
|
case SNDCTL_DSP_SETSPDIF: /* Set S/PDIF Control register */
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_SETSPDIF\n");
|
|
#endif
|
|
if (get_user(val, p))
|
|
return -EFAULT;
|
|
|
|
/* Check to make sure the codec supports S/PDIF transmitter */
|
|
|
|
if((state->card->ac97_features & 4)) {
|
|
/* mask out the transmitter speed bits so the user can't set them */
|
|
val &= ~0x3000;
|
|
|
|
/* Add the current transmitter speed bits to the passed value */
|
|
ret = i810_ac97_get(codec, AC97_SPDIF_CONTROL);
|
|
val |= (ret & 0x3000);
|
|
|
|
i810_ac97_set(codec, AC97_SPDIF_CONTROL, val);
|
|
if(i810_ac97_get(codec, AC97_SPDIF_CONTROL) != val ) {
|
|
printk(KERN_ERR "i810_audio: Unable to set S/PDIF configuration to 0x%04x.\n", val);
|
|
return -EFAULT;
|
|
}
|
|
}
|
|
#ifdef DEBUG
|
|
else
|
|
printk(KERN_WARNING "i810_audio: S/PDIF transmitter not avalible.\n");
|
|
#endif
|
|
return put_user(val, p);
|
|
|
|
case SNDCTL_DSP_GETSPDIF: /* Get S/PDIF Control register */
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_GETSPDIF\n");
|
|
#endif
|
|
if (get_user(val, p))
|
|
return -EFAULT;
|
|
|
|
/* Check to make sure the codec supports S/PDIF transmitter */
|
|
|
|
if(!(state->card->ac97_features & 4)) {
|
|
#ifdef DEBUG
|
|
printk(KERN_WARNING "i810_audio: S/PDIF transmitter not avalible.\n");
|
|
#endif
|
|
val = 0;
|
|
} else {
|
|
val = i810_ac97_get(codec, AC97_SPDIF_CONTROL);
|
|
}
|
|
//return put_user((val & 0xcfff), p);
|
|
return put_user(val, p);
|
|
|
|
case SNDCTL_DSP_GETCHANNELMASK:
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_GETCHANNELMASK\n");
|
|
#endif
|
|
if (get_user(val, p))
|
|
return -EFAULT;
|
|
|
|
/* Based on AC'97 DAC support, not ICH hardware */
|
|
val = DSP_BIND_FRONT;
|
|
if ( state->card->ac97_features & 0x0004 )
|
|
val |= DSP_BIND_SPDIF;
|
|
|
|
if ( state->card->ac97_features & 0x0080 )
|
|
val |= DSP_BIND_SURR;
|
|
if ( state->card->ac97_features & 0x0140 )
|
|
val |= DSP_BIND_CENTER_LFE;
|
|
|
|
return put_user(val, p);
|
|
|
|
case SNDCTL_DSP_BIND_CHANNEL:
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_DSP_BIND_CHANNEL\n");
|
|
#endif
|
|
if (get_user(val, p))
|
|
return -EFAULT;
|
|
if ( val == DSP_BIND_QUERY ) {
|
|
val = DSP_BIND_FRONT; /* Always report this as being enabled */
|
|
if ( state->card->ac97_status & SPDIF_ON )
|
|
val |= DSP_BIND_SPDIF;
|
|
else {
|
|
if ( state->card->ac97_status & SURR_ON )
|
|
val |= DSP_BIND_SURR;
|
|
if ( state->card->ac97_status & CENTER_LFE_ON )
|
|
val |= DSP_BIND_CENTER_LFE;
|
|
}
|
|
} else { /* Not a query, set it */
|
|
if (!(file->f_mode & FMODE_WRITE))
|
|
return -EINVAL;
|
|
if ( dmabuf->enable == DAC_RUNNING ) {
|
|
stop_dac(state);
|
|
}
|
|
if ( val & DSP_BIND_SPDIF ) { /* Turn on SPDIF */
|
|
/* Ok, this should probably define what slots
|
|
* to use. For now, we'll only set it to the
|
|
* defaults:
|
|
*
|
|
* non multichannel codec maps to slots 3&4
|
|
* 2 channel codec maps to slots 7&8
|
|
* 4 channel codec maps to slots 6&9
|
|
* 6 channel codec maps to slots 10&11
|
|
*
|
|
* there should be some way for the app to
|
|
* select the slot assignment.
|
|
*/
|
|
|
|
i810_set_spdif_output ( state, AC97_EA_SPSA_3_4, dmabuf->rate );
|
|
if ( !(state->card->ac97_status & SPDIF_ON) )
|
|
val &= ~DSP_BIND_SPDIF;
|
|
} else {
|
|
int mask;
|
|
int channels;
|
|
|
|
/* Turn off S/PDIF if it was on */
|
|
if ( state->card->ac97_status & SPDIF_ON )
|
|
i810_set_spdif_output ( state, -1, 0 );
|
|
|
|
mask = val & (DSP_BIND_FRONT | DSP_BIND_SURR | DSP_BIND_CENTER_LFE);
|
|
switch (mask) {
|
|
case DSP_BIND_FRONT:
|
|
channels = 2;
|
|
break;
|
|
case DSP_BIND_FRONT|DSP_BIND_SURR:
|
|
channels = 4;
|
|
break;
|
|
case DSP_BIND_FRONT|DSP_BIND_SURR|DSP_BIND_CENTER_LFE:
|
|
channels = 6;
|
|
break;
|
|
default:
|
|
val = DSP_BIND_FRONT;
|
|
channels = 2;
|
|
break;
|
|
}
|
|
i810_set_dac_channels ( state, channels );
|
|
|
|
/* check that they really got turned on */
|
|
if (!(state->card->ac97_status & SURR_ON))
|
|
val &= ~DSP_BIND_SURR;
|
|
if (!(state->card->ac97_status & CENTER_LFE_ON))
|
|
val &= ~DSP_BIND_CENTER_LFE;
|
|
}
|
|
}
|
|
return put_user(val, p);
|
|
|
|
case SNDCTL_DSP_MAPINBUF:
|
|
case SNDCTL_DSP_MAPOUTBUF:
|
|
case SNDCTL_DSP_SETSYNCRO:
|
|
case SOUND_PCM_WRITE_FILTER:
|
|
case SOUND_PCM_READ_FILTER:
|
|
#ifdef DEBUG
|
|
printk("SNDCTL_* -EINVAL\n");
|
|
#endif
|
|
return -EINVAL;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int i810_open(struct inode *inode, struct file *file)
|
|
{
|
|
int i = 0;
|
|
struct i810_card *card = devs;
|
|
struct i810_state *state = NULL;
|
|
struct dmabuf *dmabuf = NULL;
|
|
|
|
/* find an avaiable virtual channel (instance of /dev/dsp) */
|
|
while (card != NULL) {
|
|
/*
|
|
* If we are initializing and then fail, card could go
|
|
* away unuexpectedly while we are in the for() loop.
|
|
* So, check for card on each iteration before we check
|
|
* for card->initializing to avoid a possible oops.
|
|
* This usually only matters for times when the driver is
|
|
* autoloaded by kmod.
|
|
*/
|
|
for (i = 0; i < 50 && card && card->initializing; i++) {
|
|
set_current_state(TASK_UNINTERRUPTIBLE);
|
|
schedule_timeout(HZ/20);
|
|
}
|
|
for (i = 0; i < NR_HW_CH && card && !card->initializing; i++) {
|
|
if (card->states[i] == NULL) {
|
|
state = card->states[i] = (struct i810_state *)
|
|
kmalloc(sizeof(struct i810_state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
return -ENOMEM;
|
|
memset(state, 0, sizeof(struct i810_state));
|
|
dmabuf = &state->dmabuf;
|
|
goto found_virt;
|
|
}
|
|
}
|
|
card = card->next;
|
|
}
|
|
/* no more virtual channel avaiable */
|
|
if (!state)
|
|
return -ENODEV;
|
|
|
|
found_virt:
|
|
/* initialize the virtual channel */
|
|
state->virt = i;
|
|
state->card = card;
|
|
state->magic = I810_STATE_MAGIC;
|
|
init_waitqueue_head(&dmabuf->wait);
|
|
mutex_init(&state->open_mutex);
|
|
file->private_data = state;
|
|
dmabuf->trigger = 0;
|
|
|
|
/* allocate hardware channels */
|
|
if(file->f_mode & FMODE_READ) {
|
|
if((dmabuf->read_channel = card->alloc_rec_pcm_channel(card)) == NULL) {
|
|
kfree (card->states[i]);
|
|
card->states[i] = NULL;
|
|
return -EBUSY;
|
|
}
|
|
dmabuf->trigger |= PCM_ENABLE_INPUT;
|
|
i810_set_adc_rate(state, 8000);
|
|
}
|
|
if(file->f_mode & FMODE_WRITE) {
|
|
if((dmabuf->write_channel = card->alloc_pcm_channel(card)) == NULL) {
|
|
/* make sure we free the record channel allocated above */
|
|
if(file->f_mode & FMODE_READ)
|
|
card->free_pcm_channel(card,dmabuf->read_channel->num);
|
|
kfree (card->states[i]);
|
|
card->states[i] = NULL;
|
|
return -EBUSY;
|
|
}
|
|
/* Initialize to 8kHz? What if we don't support 8kHz? */
|
|
/* Let's change this to check for S/PDIF stuff */
|
|
|
|
dmabuf->trigger |= PCM_ENABLE_OUTPUT;
|
|
if ( spdif_locked ) {
|
|
i810_set_dac_rate(state, spdif_locked);
|
|
i810_set_spdif_output(state, AC97_EA_SPSA_3_4, spdif_locked);
|
|
} else {
|
|
i810_set_dac_rate(state, 8000);
|
|
/* Put the ACLink in 2 channel mode by default */
|
|
i = I810_IOREADL(card, GLOB_CNT);
|
|
I810_IOWRITEL(i & 0xffcfffff, card, GLOB_CNT);
|
|
}
|
|
}
|
|
|
|
/* set default sample format. According to OSS Programmer's Guide /dev/dsp
|
|
should be default to unsigned 8-bits, mono, with sample rate 8kHz and
|
|
/dev/dspW will accept 16-bits sample, but we don't support those so we
|
|
set it immediately to stereo and 16bit, which is all we do support */
|
|
dmabuf->fmt |= I810_FMT_16BIT | I810_FMT_STEREO;
|
|
dmabuf->ossfragsize = 0;
|
|
dmabuf->ossmaxfrags = 0;
|
|
dmabuf->subdivision = 0;
|
|
|
|
state->open_mode |= file->f_mode & (FMODE_READ | FMODE_WRITE);
|
|
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
|
|
static int i810_release(struct inode *inode, struct file *file)
|
|
{
|
|
struct i810_state *state = (struct i810_state *)file->private_data;
|
|
struct i810_card *card = state->card;
|
|
struct dmabuf *dmabuf = &state->dmabuf;
|
|
unsigned long flags;
|
|
|
|
lock_kernel();
|
|
|
|
/* stop DMA state machine and free DMA buffers/channels */
|
|
if(dmabuf->trigger & PCM_ENABLE_OUTPUT) {
|
|
drain_dac(state, 0);
|
|
}
|
|
if(dmabuf->trigger & PCM_ENABLE_INPUT) {
|
|
stop_adc(state);
|
|
}
|
|
spin_lock_irqsave(&card->lock, flags);
|
|
dealloc_dmabuf(state);
|
|
if (file->f_mode & FMODE_WRITE) {
|
|
state->card->free_pcm_channel(state->card, dmabuf->write_channel->num);
|
|
}
|
|
if (file->f_mode & FMODE_READ) {
|
|
state->card->free_pcm_channel(state->card, dmabuf->read_channel->num);
|
|
}
|
|
|
|
state->card->states[state->virt] = NULL;
|
|
kfree(state);
|
|
spin_unlock_irqrestore(&card->lock, flags);
|
|
unlock_kernel();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static /*const*/ struct file_operations i810_audio_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.read = i810_read,
|
|
.write = i810_write,
|
|
.poll = i810_poll,
|
|
.ioctl = i810_ioctl,
|
|
.mmap = i810_mmap,
|
|
.open = i810_open,
|
|
.release = i810_release,
|
|
};
|
|
|
|
/* Write AC97 codec registers */
|
|
|
|
static u16 i810_ac97_get_mmio(struct ac97_codec *dev, u8 reg)
|
|
{
|
|
struct i810_card *card = dev->private_data;
|
|
int count = 100;
|
|
u16 reg_set = IO_REG_OFF(dev) | (reg&0x7f);
|
|
|
|
while(count-- && (readb(card->iobase_mmio + CAS) & 1))
|
|
udelay(1);
|
|
|
|
#ifdef DEBUG_MMIO
|
|
{
|
|
u16 ans = readw(card->ac97base_mmio + reg_set);
|
|
printk(KERN_DEBUG "i810_audio: ac97_get_mmio(%d) -> 0x%04X\n", ((int) reg_set) & 0xffff, (u32) ans);
|
|
return ans;
|
|
}
|
|
#else
|
|
return readw(card->ac97base_mmio + reg_set);
|
|
#endif
|
|
}
|
|
|
|
static u16 i810_ac97_get_io(struct ac97_codec *dev, u8 reg)
|
|
{
|
|
struct i810_card *card = dev->private_data;
|
|
int count = 100;
|
|
u16 reg_set = IO_REG_OFF(dev) | (reg&0x7f);
|
|
|
|
while(count-- && (I810_IOREADB(card, CAS) & 1))
|
|
udelay(1);
|
|
|
|
return inw(card->ac97base + reg_set);
|
|
}
|
|
|
|
static void i810_ac97_set_mmio(struct ac97_codec *dev, u8 reg, u16 data)
|
|
{
|
|
struct i810_card *card = dev->private_data;
|
|
int count = 100;
|
|
u16 reg_set = IO_REG_OFF(dev) | (reg&0x7f);
|
|
|
|
while(count-- && (readb(card->iobase_mmio + CAS) & 1))
|
|
udelay(1);
|
|
|
|
writew(data, card->ac97base_mmio + reg_set);
|
|
|
|
#ifdef DEBUG_MMIO
|
|
printk(KERN_DEBUG "i810_audio: ac97_set_mmio(0x%04X, %d)\n", (u32) data, ((int) reg_set) & 0xffff);
|
|
#endif
|
|
}
|
|
|
|
static void i810_ac97_set_io(struct ac97_codec *dev, u8 reg, u16 data)
|
|
{
|
|
struct i810_card *card = dev->private_data;
|
|
int count = 100;
|
|
u16 reg_set = IO_REG_OFF(dev) | (reg&0x7f);
|
|
|
|
while(count-- && (I810_IOREADB(card, CAS) & 1))
|
|
udelay(1);
|
|
|
|
outw(data, card->ac97base + reg_set);
|
|
}
|
|
|
|
static u16 i810_ac97_get(struct ac97_codec *dev, u8 reg)
|
|
{
|
|
struct i810_card *card = dev->private_data;
|
|
u16 ret;
|
|
|
|
spin_lock(&card->ac97_lock);
|
|
if (card->use_mmio) {
|
|
ret = i810_ac97_get_mmio(dev, reg);
|
|
}
|
|
else {
|
|
ret = i810_ac97_get_io(dev, reg);
|
|
}
|
|
spin_unlock(&card->ac97_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void i810_ac97_set(struct ac97_codec *dev, u8 reg, u16 data)
|
|
{
|
|
struct i810_card *card = dev->private_data;
|
|
|
|
spin_lock(&card->ac97_lock);
|
|
if (card->use_mmio) {
|
|
i810_ac97_set_mmio(dev, reg, data);
|
|
}
|
|
else {
|
|
i810_ac97_set_io(dev, reg, data);
|
|
}
|
|
spin_unlock(&card->ac97_lock);
|
|
}
|
|
|
|
|
|
/* OSS /dev/mixer file operation methods */
|
|
|
|
static int i810_open_mixdev(struct inode *inode, struct file *file)
|
|
{
|
|
int i;
|
|
int minor = iminor(inode);
|
|
struct i810_card *card = devs;
|
|
|
|
for (card = devs; card != NULL; card = card->next) {
|
|
/*
|
|
* If we are initializing and then fail, card could go
|
|
* away unuexpectedly while we are in the for() loop.
|
|
* So, check for card on each iteration before we check
|
|
* for card->initializing to avoid a possible oops.
|
|
* This usually only matters for times when the driver is
|
|
* autoloaded by kmod.
|
|
*/
|
|
for (i = 0; i < 50 && card && card->initializing; i++) {
|
|
set_current_state(TASK_UNINTERRUPTIBLE);
|
|
schedule_timeout(HZ/20);
|
|
}
|
|
for (i = 0; i < NR_AC97 && card && !card->initializing; i++)
|
|
if (card->ac97_codec[i] != NULL &&
|
|
card->ac97_codec[i]->dev_mixer == minor) {
|
|
file->private_data = card->ac97_codec[i];
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int i810_ioctl_mixdev(struct inode *inode, struct file *file, unsigned int cmd,
|
|
unsigned long arg)
|
|
{
|
|
struct ac97_codec *codec = (struct ac97_codec *)file->private_data;
|
|
|
|
return codec->mixer_ioctl(codec, cmd, arg);
|
|
}
|
|
|
|
static /*const*/ struct file_operations i810_mixer_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.ioctl = i810_ioctl_mixdev,
|
|
.open = i810_open_mixdev,
|
|
};
|
|
|
|
/* AC97 codec initialisation. These small functions exist so we don't
|
|
duplicate code between module init and apm resume */
|
|
|
|
static inline int i810_ac97_exists(struct i810_card *card, int ac97_number)
|
|
{
|
|
u32 reg = I810_IOREADL(card, GLOB_STA);
|
|
switch (ac97_number) {
|
|
case 0:
|
|
return reg & (1<<8);
|
|
case 1:
|
|
return reg & (1<<9);
|
|
case 2:
|
|
return reg & (1<<28);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static inline int i810_ac97_enable_variable_rate(struct ac97_codec *codec)
|
|
{
|
|
i810_ac97_set(codec, AC97_EXTENDED_STATUS, 9);
|
|
i810_ac97_set(codec,AC97_EXTENDED_STATUS,
|
|
i810_ac97_get(codec, AC97_EXTENDED_STATUS)|0xE800);
|
|
|
|
return (i810_ac97_get(codec, AC97_EXTENDED_STATUS)&1);
|
|
}
|
|
|
|
|
|
static int i810_ac97_probe_and_powerup(struct i810_card *card,struct ac97_codec *codec)
|
|
{
|
|
/* Returns 0 on failure */
|
|
int i;
|
|
|
|
if (ac97_probe_codec(codec) == 0) return 0;
|
|
|
|
/* power it all up */
|
|
i810_ac97_set(codec, AC97_POWER_CONTROL,
|
|
i810_ac97_get(codec, AC97_POWER_CONTROL) & ~0x7f00);
|
|
|
|
/* wait for analog ready */
|
|
for (i=100; i && ((i810_ac97_get(codec, AC97_POWER_CONTROL) & 0xf) != 0xf); i--)
|
|
{
|
|
set_current_state(TASK_UNINTERRUPTIBLE);
|
|
schedule_timeout(HZ/20);
|
|
}
|
|
return i;
|
|
}
|
|
|
|
static int is_new_ich(u16 pci_id)
|
|
{
|
|
switch (pci_id) {
|
|
case PCI_DEVICE_ID_INTEL_82801DB_5:
|
|
case PCI_DEVICE_ID_INTEL_82801EB_5:
|
|
case PCI_DEVICE_ID_INTEL_ESB_5:
|
|
case PCI_DEVICE_ID_INTEL_ICH6_18:
|
|
return 1;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline int ich_use_mmio(struct i810_card *card)
|
|
{
|
|
return is_new_ich(card->pci_id) && card->use_mmio;
|
|
}
|
|
|
|
/**
|
|
* i810_ac97_power_up_bus - bring up AC97 link
|
|
* @card : ICH audio device to power up
|
|
*
|
|
* Bring up the ACLink AC97 codec bus
|
|
*/
|
|
|
|
static int i810_ac97_power_up_bus(struct i810_card *card)
|
|
{
|
|
u32 reg = I810_IOREADL(card, GLOB_CNT);
|
|
int i;
|
|
int primary_codec_id = 0;
|
|
|
|
if((reg&2)==0) /* Cold required */
|
|
reg|=2;
|
|
else
|
|
reg|=4; /* Warm */
|
|
|
|
reg&=~8; /* ACLink on */
|
|
|
|
/* At this point we deassert AC_RESET # */
|
|
I810_IOWRITEL(reg , card, GLOB_CNT);
|
|
|
|
/* We must now allow time for the Codec initialisation.
|
|
600mS is the specified time */
|
|
|
|
for(i=0;i<10;i++)
|
|
{
|
|
if((I810_IOREADL(card, GLOB_CNT)&4)==0)
|
|
break;
|
|
|
|
set_current_state(TASK_UNINTERRUPTIBLE);
|
|
schedule_timeout(HZ/20);
|
|
}
|
|
if(i==10)
|
|
{
|
|
printk(KERN_ERR "i810_audio: AC'97 reset failed.\n");
|
|
return 0;
|
|
}
|
|
|
|
set_current_state(TASK_UNINTERRUPTIBLE);
|
|
schedule_timeout(HZ/2);
|
|
|
|
/*
|
|
* See if the primary codec comes ready. This must happen
|
|
* before we start doing DMA stuff
|
|
*/
|
|
/* see i810_ac97_init for the next 10 lines (jsaw) */
|
|
if (card->use_mmio)
|
|
readw(card->ac97base_mmio);
|
|
else
|
|
inw(card->ac97base);
|
|
if (ich_use_mmio(card)) {
|
|
primary_codec_id = (int) readl(card->iobase_mmio + SDM) & 0x3;
|
|
printk(KERN_INFO "i810_audio: Primary codec has ID %d\n",
|
|
primary_codec_id);
|
|
}
|
|
|
|
if(! i810_ac97_exists(card, primary_codec_id))
|
|
{
|
|
printk(KERN_INFO "i810_audio: Codec not ready.. wait.. ");
|
|
set_current_state(TASK_UNINTERRUPTIBLE);
|
|
schedule_timeout(HZ); /* actually 600mS by the spec */
|
|
|
|
if(i810_ac97_exists(card, primary_codec_id))
|
|
printk("OK\n");
|
|
else
|
|
printk("no response.\n");
|
|
}
|
|
if (card->use_mmio)
|
|
readw(card->ac97base_mmio);
|
|
else
|
|
inw(card->ac97base);
|
|
return 1;
|
|
}
|
|
|
|
static int __devinit i810_ac97_init(struct i810_card *card)
|
|
{
|
|
int num_ac97 = 0;
|
|
int ac97_id;
|
|
int total_channels = 0;
|
|
int nr_ac97_max = card_cap[card->pci_id_internal].nr_ac97;
|
|
struct ac97_codec *codec;
|
|
u16 eid;
|
|
u32 reg;
|
|
|
|
if(!i810_ac97_power_up_bus(card)) return 0;
|
|
|
|
/* Number of channels supported */
|
|
/* What about the codec? Just because the ICH supports */
|
|
/* multiple channels doesn't mean the codec does. */
|
|
/* we'll have to modify this in the codec section below */
|
|
/* to reflect what the codec has. */
|
|
/* ICH and ICH0 only support 2 channels so don't bother */
|
|
/* to check.... */
|
|
|
|
card->channels = 2;
|
|
reg = I810_IOREADL(card, GLOB_STA);
|
|
if ( reg & 0x0200000 )
|
|
card->channels = 6;
|
|
else if ( reg & 0x0100000 )
|
|
card->channels = 4;
|
|
printk(KERN_INFO "i810_audio: Audio Controller supports %d channels.\n", card->channels);
|
|
printk(KERN_INFO "i810_audio: Defaulting to base 2 channel mode.\n");
|
|
reg = I810_IOREADL(card, GLOB_CNT);
|
|
I810_IOWRITEL(reg & 0xffcfffff, card, GLOB_CNT);
|
|
|
|
for (num_ac97 = 0; num_ac97 < NR_AC97; num_ac97++)
|
|
card->ac97_codec[num_ac97] = NULL;
|
|
|
|
/*@FIXME I don't know, if I'm playing to safe here... (jsaw) */
|
|
if ((nr_ac97_max > 2) && !card->use_mmio) nr_ac97_max = 2;
|
|
|
|
for (num_ac97 = 0; num_ac97 < nr_ac97_max; num_ac97++) {
|
|
/* codec reset */
|
|
printk(KERN_INFO "i810_audio: Resetting connection %d\n", num_ac97);
|
|
if (card->use_mmio)
|
|
readw(card->ac97base_mmio + 0x80*num_ac97);
|
|
else
|
|
inw(card->ac97base + 0x80*num_ac97);
|
|
|
|
/* If we have the SDATA_IN Map Register, as on ICH4, we
|
|
do not loop thru all possible codec IDs but thru all
|
|
possible IO channels. Bit 0:1 of SDM then holds the
|
|
last codec ID spoken to.
|
|
*/
|
|
if (ich_use_mmio(card)) {
|
|
ac97_id = (int) readl(card->iobase_mmio + SDM) & 0x3;
|
|
printk(KERN_INFO "i810_audio: Connection %d with codec id %d\n",
|
|
num_ac97, ac97_id);
|
|
}
|
|
else {
|
|
ac97_id = num_ac97;
|
|
}
|
|
|
|
/* The ICH programmer's reference says you should */
|
|
/* check the ready status before probing. So we chk */
|
|
/* What do we do if it's not ready? Wait and try */
|
|
/* again, or abort? */
|
|
if (!i810_ac97_exists(card, ac97_id)) {
|
|
if(num_ac97 == 0)
|
|
printk(KERN_ERR "i810_audio: Primary codec not ready.\n");
|
|
}
|
|
|
|
if ((codec = ac97_alloc_codec()) == NULL)
|
|
return -ENOMEM;
|
|
|
|
/* initialize some basic codec information, other fields will be filled
|
|
in ac97_probe_codec */
|
|
codec->private_data = card;
|
|
codec->id = ac97_id;
|
|
card->ac97_id_map[ac97_id] = num_ac97 * 0x80;
|
|
|
|
if (card->use_mmio) {
|
|
codec->codec_read = i810_ac97_get_mmio;
|
|
codec->codec_write = i810_ac97_set_mmio;
|
|
}
|
|
else {
|
|
codec->codec_read = i810_ac97_get_io;
|
|
codec->codec_write = i810_ac97_set_io;
|
|
}
|
|
|
|
if(!i810_ac97_probe_and_powerup(card,codec)) {
|
|
printk(KERN_ERR "i810_audio: timed out waiting for codec %d analog ready.\n", ac97_id);
|
|
ac97_release_codec(codec);
|
|
break; /* it didn't work */
|
|
}
|
|
/* Store state information about S/PDIF transmitter */
|
|
card->ac97_status = 0;
|
|
|
|
/* Don't attempt to get eid until powerup is complete */
|
|
eid = i810_ac97_get(codec, AC97_EXTENDED_ID);
|
|
|
|
if(eid==0xFFFF)
|
|
{
|
|
printk(KERN_WARNING "i810_audio: no codec attached ?\n");
|
|
ac97_release_codec(codec);
|
|
break;
|
|
}
|
|
|
|
/* Check for an AC97 1.0 soft modem (ID1) */
|
|
|
|
if(codec->modem)
|
|
{
|
|
printk(KERN_WARNING "i810_audio: codec %d is a softmodem - skipping.\n", ac97_id);
|
|
ac97_release_codec(codec);
|
|
continue;
|
|
}
|
|
|
|
card->ac97_features = eid;
|
|
|
|
/* Now check the codec for useful features to make up for
|
|
the dumbness of the 810 hardware engine */
|
|
|
|
if(!(eid&0x0001))
|
|
printk(KERN_WARNING "i810_audio: only 48Khz playback available.\n");
|
|
else
|
|
{
|
|
if(!i810_ac97_enable_variable_rate(codec)) {
|
|
printk(KERN_WARNING "i810_audio: Codec refused to allow VRA, using 48Khz only.\n");
|
|
card->ac97_features&=~1;
|
|
}
|
|
}
|
|
|
|
/* Turn on the amplifier */
|
|
|
|
codec->codec_write(codec, AC97_POWER_CONTROL,
|
|
codec->codec_read(codec, AC97_POWER_CONTROL) & ~0x8000);
|
|
|
|
/* Determine how many channels the codec(s) support */
|
|
/* - The primary codec always supports 2 */
|
|
/* - If the codec supports AMAP, surround DACs will */
|
|
/* automaticlly get assigned to slots. */
|
|
/* * Check for surround DACs and increment if */
|
|
/* found. */
|
|
/* - Else check if the codec is revision 2.2 */
|
|
/* * If surround DACs exist, assign them to slots */
|
|
/* and increment channel count. */
|
|
|
|
/* All of this only applies to ICH2 and above. ICH */
|
|
/* and ICH0 only support 2 channels. ICH2 will only */
|
|
/* support multiple codecs in a "split audio" config. */
|
|
/* as described above. */
|
|
|
|
/* TODO: Remove all the debugging messages! */
|
|
|
|
if((eid & 0xc000) == 0) /* primary codec */
|
|
total_channels += 2;
|
|
|
|
if(eid & 0x200) { /* GOOD, AMAP support */
|
|
if (eid & 0x0080) /* L/R Surround channels */
|
|
total_channels += 2;
|
|
if (eid & 0x0140) /* LFE and Center channels */
|
|
total_channels += 2;
|
|
printk("i810_audio: AC'97 codec %d supports AMAP, total channels = %d\n", ac97_id, total_channels);
|
|
} else if (eid & 0x0400) { /* this only works on 2.2 compliant codecs */
|
|
eid &= 0xffcf;
|
|
if((eid & 0xc000) != 0) {
|
|
switch ( total_channels ) {
|
|
case 2:
|
|
/* Set dsa1, dsa0 to 01 */
|
|
eid |= 0x0010;
|
|
break;
|
|
case 4:
|
|
/* Set dsa1, dsa0 to 10 */
|
|
eid |= 0x0020;
|
|
break;
|
|
case 6:
|
|
/* Set dsa1, dsa0 to 11 */
|
|
eid |= 0x0030;
|
|
break;
|
|
}
|
|
total_channels += 2;
|
|
}
|
|
i810_ac97_set(codec, AC97_EXTENDED_ID, eid);
|
|
eid = i810_ac97_get(codec, AC97_EXTENDED_ID);
|
|
printk("i810_audio: AC'97 codec %d, new EID value = 0x%04x\n", ac97_id, eid);
|
|
if (eid & 0x0080) /* L/R Surround channels */
|
|
total_channels += 2;
|
|
if (eid & 0x0140) /* LFE and Center channels */
|
|
total_channels += 2;
|
|
printk("i810_audio: AC'97 codec %d, DAC map configured, total channels = %d\n", ac97_id, total_channels);
|
|
} else {
|
|
printk("i810_audio: AC'97 codec %d Unable to map surround DAC's (or DAC's not present), total channels = %d\n", ac97_id, total_channels);
|
|
}
|
|
|
|
if ((codec->dev_mixer = register_sound_mixer(&i810_mixer_fops, -1)) < 0) {
|
|
printk(KERN_ERR "i810_audio: couldn't register mixer!\n");
|
|
ac97_release_codec(codec);
|
|
break;
|
|
}
|
|
|
|
card->ac97_codec[num_ac97] = codec;
|
|
}
|
|
|
|
/* tune up the primary codec */
|
|
ac97_tune_hardware(card->pci_dev, ac97_quirks, ac97_quirk);
|
|
|
|
/* pick the minimum of channels supported by ICHx or codec(s) */
|
|
card->channels = (card->channels > total_channels)?total_channels:card->channels;
|
|
|
|
return num_ac97;
|
|
}
|
|
|
|
static void __devinit i810_configure_clocking (void)
|
|
{
|
|
struct i810_card *card;
|
|
struct i810_state *state;
|
|
struct dmabuf *dmabuf;
|
|
unsigned int i, offset, new_offset;
|
|
unsigned long flags;
|
|
|
|
card = devs;
|
|
/* We could try to set the clocking for multiple cards, but can you even have
|
|
* more than one i810 in a machine? Besides, clocking is global, so unless
|
|
* someone actually thinks more than one i810 in a machine is possible and
|
|
* decides to rewrite that little bit, setting the rate for more than one card
|
|
* is a waste of time.
|
|
*/
|
|
if(card != NULL) {
|
|
state = card->states[0] = (struct i810_state *)
|
|
kmalloc(sizeof(struct i810_state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
return;
|
|
memset(state, 0, sizeof(struct i810_state));
|
|
dmabuf = &state->dmabuf;
|
|
|
|
dmabuf->write_channel = card->alloc_pcm_channel(card);
|
|
state->virt = 0;
|
|
state->card = card;
|
|
state->magic = I810_STATE_MAGIC;
|
|
init_waitqueue_head(&dmabuf->wait);
|
|
mutex_init(&state->open_mutex);
|
|
dmabuf->fmt = I810_FMT_STEREO | I810_FMT_16BIT;
|
|
dmabuf->trigger = PCM_ENABLE_OUTPUT;
|
|
i810_set_spdif_output(state, -1, 0);
|
|
i810_set_dac_channels(state, 2);
|
|
i810_set_dac_rate(state, 48000);
|
|
if(prog_dmabuf(state, 0) != 0) {
|
|
goto config_out_nodmabuf;
|
|
}
|
|
if(dmabuf->dmasize < 16384) {
|
|
goto config_out;
|
|
}
|
|
dmabuf->count = dmabuf->dmasize;
|
|
CIV_TO_LVI(card, dmabuf->write_channel->port, -1);
|
|
local_irq_save(flags);
|
|
start_dac(state);
|
|
offset = i810_get_dma_addr(state, 0);
|
|
mdelay(50);
|
|
new_offset = i810_get_dma_addr(state, 0);
|
|
stop_dac(state);
|
|
local_irq_restore(flags);
|
|
i = new_offset - offset;
|
|
#ifdef DEBUG_INTERRUPTS
|
|
printk("i810_audio: %d bytes in 50 milliseconds\n", i);
|
|
#endif
|
|
if(i == 0)
|
|
goto config_out;
|
|
i = i / 4 * 20;
|
|
if (i > 48500 || i < 47500) {
|
|
clocking = clocking * clocking / i;
|
|
printk("i810_audio: setting clocking to %d\n", clocking);
|
|
}
|
|
config_out:
|
|
dealloc_dmabuf(state);
|
|
config_out_nodmabuf:
|
|
state->card->free_pcm_channel(state->card,state->dmabuf.write_channel->num);
|
|
kfree(state);
|
|
card->states[0] = NULL;
|
|
}
|
|
}
|
|
|
|
/* install the driver, we do not allocate hardware channel nor DMA buffer now, they are defered
|
|
until "ACCESS" time (in prog_dmabuf called by open/read/write/ioctl/mmap) */
|
|
|
|
static int __devinit i810_probe(struct pci_dev *pci_dev, const struct pci_device_id *pci_id)
|
|
{
|
|
struct i810_card *card;
|
|
|
|
if (pci_enable_device(pci_dev))
|
|
return -EIO;
|
|
|
|
if (pci_set_dma_mask(pci_dev, I810_DMA_MASK)) {
|
|
printk(KERN_ERR "i810_audio: architecture does not support"
|
|
" 32bit PCI busmaster DMA\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if ((card = kmalloc(sizeof(struct i810_card), GFP_KERNEL)) == NULL) {
|
|
printk(KERN_ERR "i810_audio: out of memory\n");
|
|
return -ENOMEM;
|
|
}
|
|
memset(card, 0, sizeof(*card));
|
|
|
|
card->initializing = 1;
|
|
card->pci_dev = pci_dev;
|
|
card->pci_id = pci_id->device;
|
|
card->ac97base = pci_resource_start (pci_dev, 0);
|
|
card->iobase = pci_resource_start (pci_dev, 1);
|
|
|
|
if (!(card->ac97base) || !(card->iobase)) {
|
|
card->ac97base = 0;
|
|
card->iobase = 0;
|
|
}
|
|
|
|
/* if chipset could have mmio capability, check it */
|
|
if (card_cap[pci_id->driver_data].flags & CAP_MMIO) {
|
|
card->ac97base_mmio_phys = pci_resource_start (pci_dev, 2);
|
|
card->iobase_mmio_phys = pci_resource_start (pci_dev, 3);
|
|
|
|
if ((card->ac97base_mmio_phys) && (card->iobase_mmio_phys)) {
|
|
card->use_mmio = 1;
|
|
}
|
|
else {
|
|
card->ac97base_mmio_phys = 0;
|
|
card->iobase_mmio_phys = 0;
|
|
}
|
|
}
|
|
|
|
if (!(card->use_mmio) && (!(card->iobase) || !(card->ac97base))) {
|
|
printk(KERN_ERR "i810_audio: No I/O resources available.\n");
|
|
goto out_mem;
|
|
}
|
|
|
|
card->irq = pci_dev->irq;
|
|
card->next = devs;
|
|
card->magic = I810_CARD_MAGIC;
|
|
#ifdef CONFIG_PM
|
|
card->pm_suspended=0;
|
|
#endif
|
|
spin_lock_init(&card->lock);
|
|
spin_lock_init(&card->ac97_lock);
|
|
devs = card;
|
|
|
|
pci_set_master(pci_dev);
|
|
|
|
printk(KERN_INFO "i810: %s found at IO 0x%04lx and 0x%04lx, "
|
|
"MEM 0x%04lx and 0x%04lx, IRQ %d\n",
|
|
card_names[pci_id->driver_data],
|
|
card->iobase, card->ac97base,
|
|
card->ac97base_mmio_phys, card->iobase_mmio_phys,
|
|
card->irq);
|
|
|
|
card->alloc_pcm_channel = i810_alloc_pcm_channel;
|
|
card->alloc_rec_pcm_channel = i810_alloc_rec_pcm_channel;
|
|
card->alloc_rec_mic_channel = i810_alloc_rec_mic_channel;
|
|
card->free_pcm_channel = i810_free_pcm_channel;
|
|
|
|
if ((card->channel = pci_alloc_consistent(pci_dev,
|
|
sizeof(struct i810_channel)*NR_HW_CH, &card->chandma)) == NULL) {
|
|
printk(KERN_ERR "i810: cannot allocate channel DMA memory\n");
|
|
goto out_mem;
|
|
}
|
|
|
|
{ /* We may dispose of this altogether some time soon, so... */
|
|
struct i810_channel *cp = card->channel;
|
|
|
|
cp[0].offset = 0;
|
|
cp[0].port = 0x00;
|
|
cp[0].num = 0;
|
|
cp[1].offset = 0;
|
|
cp[1].port = 0x10;
|
|
cp[1].num = 1;
|
|
cp[2].offset = 0;
|
|
cp[2].port = 0x20;
|
|
cp[2].num = 2;
|
|
}
|
|
|
|
/* claim our iospace and irq */
|
|
if (!request_region(card->iobase, 64, card_names[pci_id->driver_data])) {
|
|
printk(KERN_ERR "i810_audio: unable to allocate region %lx\n", card->iobase);
|
|
goto out_region1;
|
|
}
|
|
if (!request_region(card->ac97base, 256, card_names[pci_id->driver_data])) {
|
|
printk(KERN_ERR "i810_audio: unable to allocate region %lx\n", card->ac97base);
|
|
goto out_region2;
|
|
}
|
|
|
|
if (card->use_mmio) {
|
|
if (request_mem_region(card->ac97base_mmio_phys, 512, "ich_audio MMBAR")) {
|
|
if ((card->ac97base_mmio = ioremap(card->ac97base_mmio_phys, 512))) { /*@FIXME can ioremap fail? don't know (jsaw) */
|
|
if (request_mem_region(card->iobase_mmio_phys, 256, "ich_audio MBBAR")) {
|
|
if ((card->iobase_mmio = ioremap(card->iobase_mmio_phys, 256))) {
|
|
printk(KERN_INFO "i810: %s mmio at 0x%04lx and 0x%04lx\n",
|
|
card_names[pci_id->driver_data],
|
|
(unsigned long) card->ac97base_mmio,
|
|
(unsigned long) card->iobase_mmio);
|
|
}
|
|
else {
|
|
iounmap(card->ac97base_mmio);
|
|
release_mem_region(card->ac97base_mmio_phys, 512);
|
|
release_mem_region(card->iobase_mmio_phys, 512);
|
|
card->use_mmio = 0;
|
|
}
|
|
}
|
|
else {
|
|
iounmap(card->ac97base_mmio);
|
|
release_mem_region(card->ac97base_mmio_phys, 512);
|
|
card->use_mmio = 0;
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
card->use_mmio = 0;
|
|
}
|
|
}
|
|
|
|
/* initialize AC97 codec and register /dev/mixer */
|
|
if (i810_ac97_init(card) <= 0)
|
|
goto out_iospace;
|
|
pci_set_drvdata(pci_dev, card);
|
|
|
|
if(clocking == 0) {
|
|
clocking = 48000;
|
|
i810_configure_clocking();
|
|
}
|
|
|
|
/* register /dev/dsp */
|
|
if ((card->dev_audio = register_sound_dsp(&i810_audio_fops, -1)) < 0) {
|
|
int i;
|
|
printk(KERN_ERR "i810_audio: couldn't register DSP device!\n");
|
|
for (i = 0; i < NR_AC97; i++)
|
|
if (card->ac97_codec[i] != NULL) {
|
|
unregister_sound_mixer(card->ac97_codec[i]->dev_mixer);
|
|
ac97_release_codec(card->ac97_codec[i]);
|
|
}
|
|
goto out_iospace;
|
|
}
|
|
|
|
if (request_irq(card->irq, &i810_interrupt, IRQF_SHARED,
|
|
card_names[pci_id->driver_data], card)) {
|
|
printk(KERN_ERR "i810_audio: unable to allocate irq %d\n", card->irq);
|
|
goto out_iospace;
|
|
}
|
|
|
|
|
|
card->initializing = 0;
|
|
return 0;
|
|
|
|
out_iospace:
|
|
if (card->use_mmio) {
|
|
iounmap(card->ac97base_mmio);
|
|
iounmap(card->iobase_mmio);
|
|
release_mem_region(card->ac97base_mmio_phys, 512);
|
|
release_mem_region(card->iobase_mmio_phys, 256);
|
|
}
|
|
release_region(card->ac97base, 256);
|
|
out_region2:
|
|
release_region(card->iobase, 64);
|
|
out_region1:
|
|
pci_free_consistent(pci_dev, sizeof(struct i810_channel)*NR_HW_CH,
|
|
card->channel, card->chandma);
|
|
out_mem:
|
|
kfree(card);
|
|
return -ENODEV;
|
|
}
|
|
|
|
static void __devexit i810_remove(struct pci_dev *pci_dev)
|
|
{
|
|
int i;
|
|
struct i810_card *card = pci_get_drvdata(pci_dev);
|
|
/* free hardware resources */
|
|
free_irq(card->irq, devs);
|
|
release_region(card->iobase, 64);
|
|
release_region(card->ac97base, 256);
|
|
pci_free_consistent(pci_dev, sizeof(struct i810_channel)*NR_HW_CH,
|
|
card->channel, card->chandma);
|
|
if (card->use_mmio) {
|
|
iounmap(card->ac97base_mmio);
|
|
iounmap(card->iobase_mmio);
|
|
release_mem_region(card->ac97base_mmio_phys, 512);
|
|
release_mem_region(card->iobase_mmio_phys, 256);
|
|
}
|
|
|
|
/* unregister audio devices */
|
|
for (i = 0; i < NR_AC97; i++)
|
|
if (card->ac97_codec[i] != NULL) {
|
|
unregister_sound_mixer(card->ac97_codec[i]->dev_mixer);
|
|
ac97_release_codec(card->ac97_codec[i]);
|
|
card->ac97_codec[i] = NULL;
|
|
}
|
|
unregister_sound_dsp(card->dev_audio);
|
|
kfree(card);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int i810_pm_suspend(struct pci_dev *dev, pm_message_t pm_state)
|
|
{
|
|
struct i810_card *card = pci_get_drvdata(dev);
|
|
struct i810_state *state;
|
|
unsigned long flags;
|
|
struct dmabuf *dmabuf;
|
|
int i,num_ac97;
|
|
#ifdef DEBUG
|
|
printk("i810_audio: i810_pm_suspend called\n");
|
|
#endif
|
|
if(!card) return 0;
|
|
spin_lock_irqsave(&card->lock, flags);
|
|
card->pm_suspended=1;
|
|
for(i=0;i<NR_HW_CH;i++) {
|
|
state = card->states[i];
|
|
if(!state) continue;
|
|
/* this happens only if there are open files */
|
|
dmabuf = &state->dmabuf;
|
|
if(dmabuf->enable & DAC_RUNNING ||
|
|
(dmabuf->count && (dmabuf->trigger & PCM_ENABLE_OUTPUT))) {
|
|
state->pm_saved_dac_rate=dmabuf->rate;
|
|
stop_dac(state);
|
|
} else {
|
|
state->pm_saved_dac_rate=0;
|
|
}
|
|
if(dmabuf->enable & ADC_RUNNING) {
|
|
state->pm_saved_adc_rate=dmabuf->rate;
|
|
stop_adc(state);
|
|
} else {
|
|
state->pm_saved_adc_rate=0;
|
|
}
|
|
dmabuf->ready = 0;
|
|
dmabuf->swptr = dmabuf->hwptr = 0;
|
|
dmabuf->count = dmabuf->total_bytes = 0;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&card->lock, flags);
|
|
|
|
/* save mixer settings */
|
|
for (num_ac97 = 0; num_ac97 < NR_AC97; num_ac97++) {
|
|
struct ac97_codec *codec = card->ac97_codec[num_ac97];
|
|
if(!codec) continue;
|
|
for(i=0;i< SOUND_MIXER_NRDEVICES ;i++) {
|
|
if((supported_mixer(codec,i)) &&
|
|
(codec->read_mixer)) {
|
|
card->pm_saved_mixer_settings[i][num_ac97]=
|
|
codec->read_mixer(codec,i);
|
|
}
|
|
}
|
|
}
|
|
pci_save_state(dev); /* XXX do we need this? */
|
|
pci_disable_device(dev); /* disable busmastering */
|
|
pci_set_power_state(dev,3); /* Zzz. */
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int i810_pm_resume(struct pci_dev *dev)
|
|
{
|
|
int num_ac97,i=0;
|
|
struct i810_card *card=pci_get_drvdata(dev);
|
|
pci_enable_device(dev);
|
|
pci_restore_state (dev);
|
|
|
|
/* observation of a toshiba portege 3440ct suggests that the
|
|
hardware has to be more or less completely reinitialized from
|
|
scratch after an apm suspend. Works For Me. -dan */
|
|
|
|
i810_ac97_power_up_bus(card);
|
|
|
|
for (num_ac97 = 0; num_ac97 < NR_AC97; num_ac97++) {
|
|
struct ac97_codec *codec = card->ac97_codec[num_ac97];
|
|
/* check they haven't stolen the hardware while we were
|
|
away */
|
|
if(!codec || !i810_ac97_exists(card,num_ac97)) {
|
|
if(num_ac97) continue;
|
|
else BUG();
|
|
}
|
|
if(!i810_ac97_probe_and_powerup(card,codec)) BUG();
|
|
|
|
if((card->ac97_features&0x0001)) {
|
|
/* at probe time we found we could do variable
|
|
rates, but APM suspend has made it forget
|
|
its magical powers */
|
|
if(!i810_ac97_enable_variable_rate(codec)) BUG();
|
|
}
|
|
/* we lost our mixer settings, so restore them */
|
|
for(i=0;i< SOUND_MIXER_NRDEVICES ;i++) {
|
|
if(supported_mixer(codec,i)){
|
|
int val=card->
|
|
pm_saved_mixer_settings[i][num_ac97];
|
|
codec->mixer_state[i]=val;
|
|
codec->write_mixer(codec,i,
|
|
(val & 0xff) ,
|
|
((val >> 8) & 0xff) );
|
|
}
|
|
}
|
|
}
|
|
|
|
/* we need to restore the sample rate from whatever it was */
|
|
for(i=0;i<NR_HW_CH;i++) {
|
|
struct i810_state * state=card->states[i];
|
|
if(state) {
|
|
if(state->pm_saved_adc_rate)
|
|
i810_set_adc_rate(state,state->pm_saved_adc_rate);
|
|
if(state->pm_saved_dac_rate)
|
|
i810_set_dac_rate(state,state->pm_saved_dac_rate);
|
|
}
|
|
}
|
|
|
|
|
|
card->pm_suspended = 0;
|
|
|
|
/* any processes that were reading/writing during the suspend
|
|
probably ended up here */
|
|
for(i=0;i<NR_HW_CH;i++) {
|
|
struct i810_state *state = card->states[i];
|
|
if(state) wake_up(&state->dmabuf.wait);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
MODULE_AUTHOR("The Linux kernel team");
|
|
MODULE_DESCRIPTION("Intel 810 audio support");
|
|
MODULE_LICENSE("GPL");
|
|
module_param(ftsodell, int, 0444);
|
|
module_param(clocking, uint, 0444);
|
|
module_param(strict_clocking, int, 0444);
|
|
module_param(spdif_locked, int, 0444);
|
|
|
|
#define I810_MODULE_NAME "i810_audio"
|
|
|
|
static struct pci_driver i810_pci_driver = {
|
|
.name = I810_MODULE_NAME,
|
|
.id_table = i810_pci_tbl,
|
|
.probe = i810_probe,
|
|
.remove = __devexit_p(i810_remove),
|
|
#ifdef CONFIG_PM
|
|
.suspend = i810_pm_suspend,
|
|
.resume = i810_pm_resume,
|
|
#endif /* CONFIG_PM */
|
|
};
|
|
|
|
|
|
static int __init i810_init_module (void)
|
|
{
|
|
int retval;
|
|
|
|
printk(KERN_INFO "Intel 810 + AC97 Audio, version "
|
|
DRIVER_VERSION ", " __TIME__ " " __DATE__ "\n");
|
|
|
|
retval = pci_register_driver(&i810_pci_driver);
|
|
if (retval)
|
|
return retval;
|
|
|
|
if(ftsodell != 0) {
|
|
printk("i810_audio: ftsodell is now a deprecated option.\n");
|
|
}
|
|
if(spdif_locked > 0 ) {
|
|
if(spdif_locked == 32000 || spdif_locked == 44100 || spdif_locked == 48000) {
|
|
printk("i810_audio: Enabling S/PDIF at sample rate %dHz.\n", spdif_locked);
|
|
} else {
|
|
printk("i810_audio: S/PDIF can only be locked to 32000, 44100, or 48000Hz.\n");
|
|
spdif_locked = 0;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit i810_cleanup_module (void)
|
|
{
|
|
pci_unregister_driver(&i810_pci_driver);
|
|
}
|
|
|
|
module_init(i810_init_module);
|
|
module_exit(i810_cleanup_module);
|
|
|
|
/*
|
|
Local Variables:
|
|
c-basic-offset: 8
|
|
End:
|
|
*/
|