![Linus Torvalds](/assets/img/avatar_default.png)
Pull HID updates from Jiri Kosina: - new hid-alps driver for ALPS Touchpad-Stick device, from Masaki Ota - much improved and generalized HID led handling, and merge of specialized hid-thingm driver into this generic hid-led one, from Heiner Kallweit - i2c-hid power management improvements from Fu Zhonghui and Guohua Zhong - uhid initialization race fix from Roderick Colenbrander * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (21 commits) HID: add usb device id for Apple Magic Keyboard HID: hid-led: fix Delcom support on big endian systems HID: hid-led: add support for Greynut Luxafor HID: hid-led: add support for Delcom Visual Signal Indicator G2 HID: hid-led: remove report id from struct hidled_config HID: alps: a few cleanups HID: remove ThingM blink(1) driver HID: hid-led: add support for ThingM blink(1) HID: hid-led: add support for reading from LED devices HID: hid-led: add support for devices with multiple independent LEDs HID: i2c-hid: set power sleep before shutdown HID: alps: match alps devices in core HID: thingm: simplify debug output code HID: alps: pass correct sizes to hid_hw_raw_request() HID: alps: struct u1_dev *priv is internal to the driver HID: add Alps I2C HID Touchpad-Stick support HID: led: fix config usb: misc: remove outdated USB LED driver HID: migrate USB LED driver from usb misc to hid HID: i2c_hid: enable i2c-hid devices to suspend/resume asynchronously ...
289 lines
10 KiB
Plaintext
289 lines
10 KiB
Plaintext
#
|
|
# USB Miscellaneous driver configuration
|
|
#
|
|
comment "USB Miscellaneous drivers"
|
|
|
|
config USB_EMI62
|
|
tristate "EMI 6|2m USB Audio interface support"
|
|
---help---
|
|
This driver loads firmware to Emagic EMI 6|2m low latency USB
|
|
Audio and Midi interface.
|
|
|
|
After firmware load the device is handled with standard linux
|
|
USB Audio driver.
|
|
|
|
This code is also available as a module ( = code which can be
|
|
inserted in and removed from the running kernel whenever you want).
|
|
The module will be called audio. If you want to compile it as a
|
|
module, say M here and read <file:Documentation/kbuild/modules.txt>.
|
|
|
|
config USB_EMI26
|
|
tristate "EMI 2|6 USB Audio interface support"
|
|
---help---
|
|
This driver loads firmware to Emagic EMI 2|6 low latency USB
|
|
Audio interface.
|
|
|
|
After firmware load the device is handled with standard linux
|
|
USB Audio driver.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called emi26.
|
|
|
|
config USB_ADUTUX
|
|
tristate "ADU devices from Ontrak Control Systems"
|
|
help
|
|
Say Y if you want to use an ADU device from Ontrak Control
|
|
Systems.
|
|
|
|
To compile this driver as a module, choose M here. The module
|
|
will be called adutux.
|
|
|
|
config USB_SEVSEG
|
|
tristate "USB 7-Segment LED Display"
|
|
help
|
|
Say Y here if you have a USB 7-Segment Display by Delcom
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called usbsevseg.
|
|
|
|
config USB_RIO500
|
|
tristate "USB Diamond Rio500 support"
|
|
help
|
|
Say Y here if you want to connect a USB Rio500 mp3 player to your
|
|
computer's USB port. Please read <file:Documentation/usb/rio.txt>
|
|
for more information.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called rio500.
|
|
|
|
config USB_LEGOTOWER
|
|
tristate "USB Lego Infrared Tower support"
|
|
help
|
|
Say Y here if you want to connect a USB Lego Infrared Tower to your
|
|
computer's USB port.
|
|
|
|
This code is also available as a module ( = code which can be
|
|
inserted in and removed from the running kernel whenever you want).
|
|
The module will be called legousbtower. If you want to compile it as
|
|
a module, say M here and read
|
|
<file:Documentation/kbuild/modules.txt>.
|
|
|
|
config USB_LCD
|
|
tristate "USB LCD driver support"
|
|
help
|
|
Say Y here if you want to connect an USBLCD to your computer's
|
|
USB port. The USBLCD is a small USB interface board for
|
|
alphanumeric LCD modules. See <http://www.usblcd.de/> for more
|
|
information.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called usblcd.
|
|
|
|
config USB_CYPRESS_CY7C63
|
|
tristate "Cypress CY7C63xxx USB driver support"
|
|
help
|
|
Say Y here if you want to connect a Cypress CY7C63xxx
|
|
micro controller to your computer's USB port. Currently this
|
|
driver supports the pre-programmed devices (incl. firmware)
|
|
by AK Modul-Bus Computer GmbH.
|
|
|
|
Please see: http://www.ak-modul-bus.de/stat/mikrocontroller.html
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cypress_cy7c63.
|
|
|
|
config USB_CYTHERM
|
|
tristate "Cypress USB thermometer driver support"
|
|
help
|
|
Say Y here if you want to connect a Cypress USB thermometer
|
|
device to your computer's USB port. This device is also known
|
|
as the Cypress USB Starter kit or demo board. The Elektor
|
|
magazine published a modified version of this device in issue
|
|
#291.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called cytherm.
|
|
|
|
config USB_IDMOUSE
|
|
tristate "Siemens ID USB Mouse Fingerprint sensor support"
|
|
help
|
|
Say Y here if you want to use the fingerprint sensor on
|
|
the Siemens ID Mouse. There is also a Siemens ID Mouse
|
|
_Professional_, which has not been tested with this driver,
|
|
but uses the same sensor and may therefore work.
|
|
|
|
This driver creates an entry "/dev/idmouseX" or "/dev/usb/idmouseX",
|
|
which can be used by, e.g.,"cat /dev/idmouse0 > fingerprint.pnm".
|
|
|
|
See also <http://www.fs.tum.de/~echtler/idmouse/>.
|
|
|
|
config USB_FTDI_ELAN
|
|
tristate "Elan PCMCIA CardBus Adapter USB Client"
|
|
help
|
|
ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters.
|
|
Currently only the U132 adapter is available.
|
|
|
|
The U132 is specifically designed for CardBus PC cards that contain
|
|
an OHCI host controller. Typical PC cards are the Orange Mobile 3G
|
|
Option GlobeTrotter Fusion card. The U132 adapter will *NOT* work
|
|
with PC cards that do not contain an OHCI controller. To use a U132
|
|
adapter you will need this "ftdi-elan" module as well as the "u132-hcd"
|
|
module which is a USB host controller driver that talks to the OHCI
|
|
controller within CardBus card that are inserted in the U132 adapter.
|
|
|
|
This driver has been tested with a CardBus OHCI USB adapter, and
|
|
worked with a USB PEN Drive inserted into the first USB port of
|
|
the PCCARD. A rather pointless thing to do, but useful for testing.
|
|
|
|
See also the USB_U132_HCD entry "Elan U132 Adapter Host Controller"
|
|
|
|
It is safe to say M here.
|
|
|
|
config USB_APPLEDISPLAY
|
|
tristate "Apple Cinema Display support"
|
|
select BACKLIGHT_LCD_SUPPORT
|
|
select BACKLIGHT_CLASS_DEVICE
|
|
help
|
|
Say Y here if you want to control the backlight of Apple Cinema
|
|
Displays over USB. This driver provides a sysfs interface.
|
|
|
|
source "drivers/usb/misc/sisusbvga/Kconfig"
|
|
|
|
config USB_LD
|
|
tristate "USB LD driver"
|
|
help
|
|
This driver is for generic USB devices that use interrupt transfers,
|
|
like LD Didactic's USB devices.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called ldusb.
|
|
|
|
config USB_TRANCEVIBRATOR
|
|
tristate "PlayStation 2 Trance Vibrator driver support"
|
|
help
|
|
Say Y here if you want to connect a PlayStation 2 Trance Vibrator
|
|
device to your computer's USB port.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called trancevibrator.
|
|
|
|
config USB_IOWARRIOR
|
|
tristate "IO Warrior driver support"
|
|
help
|
|
Say Y here if you want to support the IO Warrior devices from Code
|
|
Mercenaries. This includes support for the following devices:
|
|
IO Warrior 40
|
|
IO Warrior 24
|
|
IO Warrior 56
|
|
IO Warrior 24 Power Vampire
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called iowarrior.
|
|
|
|
config USB_TEST
|
|
tristate "USB testing driver"
|
|
help
|
|
This driver is for testing host controller software. It is used
|
|
with specialized device firmware for regression and stress testing,
|
|
to help prevent problems from cropping up with "real" drivers.
|
|
|
|
See <http://www.linux-usb.org/usbtest/> for more information,
|
|
including sample test device firmware and "how to use it".
|
|
|
|
config USB_EHSET_TEST_FIXTURE
|
|
tristate "USB EHSET Test Fixture driver"
|
|
help
|
|
Say Y here if you want to support the special test fixture device
|
|
used for the USB-IF Embedded Host High-Speed Electrical Test procedure.
|
|
|
|
When the test fixture is connected, it can enumerate as one of several
|
|
VID/PID pairs. This driver then initiates a corresponding test mode on
|
|
the downstream port to which the test fixture is attached.
|
|
|
|
See <http://www.usb.org/developers/onthego/EHSET_v1.01.pdf> for more
|
|
information.
|
|
|
|
config USB_ISIGHTFW
|
|
tristate "iSight firmware loading support"
|
|
select FW_LOADER
|
|
help
|
|
This driver loads firmware for USB Apple iSight cameras, allowing
|
|
them to be driven by the USB video class driver available at
|
|
http://linux-uvc.berlios.de
|
|
|
|
The firmware for this driver must be extracted from the MacOS
|
|
driver beforehand. Tools for doing so are available at
|
|
http://bersace03.free.fr
|
|
|
|
config USB_YUREX
|
|
tristate "USB YUREX driver support"
|
|
help
|
|
Say Y here if you want to connect a YUREX to your computer's
|
|
USB port. The YUREX is a leg-shakes sensor. See
|
|
<http://bbu.kayac.com/en/> for further information.
|
|
This driver supports read/write of leg-shakes counter and
|
|
fasync for the counter update via a device file /dev/yurex*.
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called yurex.
|
|
|
|
config USB_EZUSB_FX2
|
|
tristate "Functions for loading firmware on EZUSB chips"
|
|
help
|
|
Say Y here if you need EZUSB device support.
|
|
(Cypress FX/FX2/FX2LP microcontrollers)
|
|
|
|
config USB_HSIC_USB3503
|
|
tristate "USB3503 HSIC to USB20 Driver"
|
|
depends on I2C
|
|
select REGMAP_I2C
|
|
help
|
|
This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.
|
|
|
|
config USB_LINK_LAYER_TEST
|
|
tristate "USB Link Layer Test driver"
|
|
help
|
|
This driver is for generating specific traffic for Super Speed Link
|
|
Layer Test Device. Say Y only when you want to conduct USB Super Speed
|
|
Link Layer Test for host controllers.
|
|
|
|
config USB_CHAOSKEY
|
|
tristate "ChaosKey random number generator driver support"
|
|
depends on HW_RANDOM
|
|
help
|
|
Say Y here if you want to connect an AltusMetrum ChaosKey or
|
|
Araneus Alea I to your computer's USB port. These devices
|
|
are hardware random number generators which hook into the
|
|
kernel entropy pool to ensure a large supply of entropy for
|
|
/dev/random and /dev/urandom and also provides direct access
|
|
via /dev/chaoskeyX
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called chaoskey.
|
|
|
|
config UCSI
|
|
tristate "USB Type-C Connector System Software Interface driver"
|
|
depends on ACPI
|
|
help
|
|
UCSI driver is meant to be used as a convenience tool for desktop and
|
|
server systems that are not equipped to handle USB in device mode. It
|
|
will always select USB host role for the USB Type-C ports on systems
|
|
that provide UCSI interface.
|
|
|
|
USB Type-C Connector System Software Interface (UCSI) is a
|
|
specification for an interface that allows the Operating System to
|
|
control the USB Type-C ports on a system. Things the need controlling
|
|
include the USB Data Role (host or device), and when USB Power
|
|
Delivery is supported, the Power Role (source or sink). With USB
|
|
Type-C connectors, when two dual role capable devices are attached
|
|
together, the data role is selected randomly. Therefore it is
|
|
important to give the OS a way to select the role. Otherwise the user
|
|
would have to unplug and replug in order in order to attempt to swap
|
|
the data and power roles.
|
|
|
|
The UCSI specification can be downloaded from:
|
|
http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb-type-c-ucsi-spec.html
|
|
|
|
To compile the driver as a module, choose M here: the module will be
|
|
called ucsi.
|