![Julia Lawall](/assets/img/avatar_default.png)
Check for uart_ops structures that are only stored in the ops field of a uart_port structure. This field is declared const, so uart_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct uart_ops i@p = { ... }; @ok@ identifier r.i; struct uart_port e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct uart_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct uart_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
919 lines
21 KiB
C
919 lines
21 KiB
C
/*
|
|
*
|
|
* Copyright (C) 2008 Christian Pellegrin <chripell@evolware.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
*
|
|
* Notes: the MAX3100 doesn't provide an interrupt on CTS so we have
|
|
* to use polling for flow control. TX empty IRQ is unusable, since
|
|
* writing conf clears FIFO buffer and we cannot have this interrupt
|
|
* always asking us for attention.
|
|
*
|
|
* Example platform data:
|
|
|
|
static struct plat_max3100 max3100_plat_data = {
|
|
.loopback = 0,
|
|
.crystal = 0,
|
|
.poll_time = 100,
|
|
};
|
|
|
|
static struct spi_board_info spi_board_info[] = {
|
|
{
|
|
.modalias = "max3100",
|
|
.platform_data = &max3100_plat_data,
|
|
.irq = IRQ_EINT12,
|
|
.max_speed_hz = 5*1000*1000,
|
|
.chip_select = 0,
|
|
},
|
|
};
|
|
|
|
* The initial minor number is 209 in the low-density serial port:
|
|
* mknod /dev/ttyMAX0 c 204 209
|
|
*/
|
|
|
|
#define MAX3100_MAJOR 204
|
|
#define MAX3100_MINOR 209
|
|
/* 4 MAX3100s should be enough for everyone */
|
|
#define MAX_MAX3100 4
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/freezer.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
|
|
#include <linux/serial_max3100.h>
|
|
|
|
#define MAX3100_C (1<<14)
|
|
#define MAX3100_D (0<<14)
|
|
#define MAX3100_W (1<<15)
|
|
#define MAX3100_RX (0<<15)
|
|
|
|
#define MAX3100_WC (MAX3100_W | MAX3100_C)
|
|
#define MAX3100_RC (MAX3100_RX | MAX3100_C)
|
|
#define MAX3100_WD (MAX3100_W | MAX3100_D)
|
|
#define MAX3100_RD (MAX3100_RX | MAX3100_D)
|
|
#define MAX3100_CMD (3 << 14)
|
|
|
|
#define MAX3100_T (1<<14)
|
|
#define MAX3100_R (1<<15)
|
|
|
|
#define MAX3100_FEN (1<<13)
|
|
#define MAX3100_SHDN (1<<12)
|
|
#define MAX3100_TM (1<<11)
|
|
#define MAX3100_RM (1<<10)
|
|
#define MAX3100_PM (1<<9)
|
|
#define MAX3100_RAM (1<<8)
|
|
#define MAX3100_IR (1<<7)
|
|
#define MAX3100_ST (1<<6)
|
|
#define MAX3100_PE (1<<5)
|
|
#define MAX3100_L (1<<4)
|
|
#define MAX3100_BAUD (0xf)
|
|
|
|
#define MAX3100_TE (1<<10)
|
|
#define MAX3100_RAFE (1<<10)
|
|
#define MAX3100_RTS (1<<9)
|
|
#define MAX3100_CTS (1<<9)
|
|
#define MAX3100_PT (1<<8)
|
|
#define MAX3100_DATA (0xff)
|
|
|
|
#define MAX3100_RT (MAX3100_R | MAX3100_T)
|
|
#define MAX3100_RTC (MAX3100_RT | MAX3100_CTS | MAX3100_RAFE)
|
|
|
|
/* the following simulate a status reg for ignore_status_mask */
|
|
#define MAX3100_STATUS_PE 1
|
|
#define MAX3100_STATUS_FE 2
|
|
#define MAX3100_STATUS_OE 4
|
|
|
|
struct max3100_port {
|
|
struct uart_port port;
|
|
struct spi_device *spi;
|
|
|
|
int cts; /* last CTS received for flow ctrl */
|
|
int tx_empty; /* last TX empty bit */
|
|
|
|
spinlock_t conf_lock; /* shared data */
|
|
int conf_commit; /* need to make changes */
|
|
int conf; /* configuration for the MAX31000
|
|
* (bits 0-7, bits 8-11 are irqs) */
|
|
int rts_commit; /* need to change rts */
|
|
int rts; /* rts status */
|
|
int baud; /* current baud rate */
|
|
|
|
int parity; /* keeps track if we should send parity */
|
|
#define MAX3100_PARITY_ON 1
|
|
#define MAX3100_PARITY_ODD 2
|
|
#define MAX3100_7BIT 4
|
|
int rx_enabled; /* if we should rx chars */
|
|
|
|
int irq; /* irq assigned to the max3100 */
|
|
|
|
int minor; /* minor number */
|
|
int crystal; /* 1 if 3.6864Mhz crystal 0 for 1.8432 */
|
|
int loopback; /* 1 if we are in loopback mode */
|
|
|
|
/* for handling irqs: need workqueue since we do spi_sync */
|
|
struct workqueue_struct *workqueue;
|
|
struct work_struct work;
|
|
/* set to 1 to make the workhandler exit as soon as possible */
|
|
int force_end_work;
|
|
/* need to know we are suspending to avoid deadlock on workqueue */
|
|
int suspending;
|
|
|
|
/* hook for suspending MAX3100 via dedicated pin */
|
|
void (*max3100_hw_suspend) (int suspend);
|
|
|
|
/* poll time (in ms) for ctrl lines */
|
|
int poll_time;
|
|
/* and its timer */
|
|
struct timer_list timer;
|
|
};
|
|
|
|
static struct max3100_port *max3100s[MAX_MAX3100]; /* the chips */
|
|
static DEFINE_MUTEX(max3100s_lock); /* race on probe */
|
|
|
|
static int max3100_do_parity(struct max3100_port *s, u16 c)
|
|
{
|
|
int parity;
|
|
|
|
if (s->parity & MAX3100_PARITY_ODD)
|
|
parity = 1;
|
|
else
|
|
parity = 0;
|
|
|
|
if (s->parity & MAX3100_7BIT)
|
|
c &= 0x7f;
|
|
else
|
|
c &= 0xff;
|
|
|
|
parity = parity ^ (hweight8(c) & 1);
|
|
return parity;
|
|
}
|
|
|
|
static int max3100_check_parity(struct max3100_port *s, u16 c)
|
|
{
|
|
return max3100_do_parity(s, c) == ((c >> 8) & 1);
|
|
}
|
|
|
|
static void max3100_calc_parity(struct max3100_port *s, u16 *c)
|
|
{
|
|
if (s->parity & MAX3100_7BIT)
|
|
*c &= 0x7f;
|
|
else
|
|
*c &= 0xff;
|
|
|
|
if (s->parity & MAX3100_PARITY_ON)
|
|
*c |= max3100_do_parity(s, *c) << 8;
|
|
}
|
|
|
|
static void max3100_work(struct work_struct *w);
|
|
|
|
static void max3100_dowork(struct max3100_port *s)
|
|
{
|
|
if (!s->force_end_work && !freezing(current) && !s->suspending)
|
|
queue_work(s->workqueue, &s->work);
|
|
}
|
|
|
|
static void max3100_timeout(unsigned long data)
|
|
{
|
|
struct max3100_port *s = (struct max3100_port *)data;
|
|
|
|
if (s->port.state) {
|
|
max3100_dowork(s);
|
|
mod_timer(&s->timer, jiffies + s->poll_time);
|
|
}
|
|
}
|
|
|
|
static int max3100_sr(struct max3100_port *s, u16 tx, u16 *rx)
|
|
{
|
|
struct spi_message message;
|
|
u16 etx, erx;
|
|
int status;
|
|
struct spi_transfer tran = {
|
|
.tx_buf = &etx,
|
|
.rx_buf = &erx,
|
|
.len = 2,
|
|
};
|
|
|
|
etx = cpu_to_be16(tx);
|
|
spi_message_init(&message);
|
|
spi_message_add_tail(&tran, &message);
|
|
status = spi_sync(s->spi, &message);
|
|
if (status) {
|
|
dev_warn(&s->spi->dev, "error while calling spi_sync\n");
|
|
return -EIO;
|
|
}
|
|
*rx = be16_to_cpu(erx);
|
|
s->tx_empty = (*rx & MAX3100_T) > 0;
|
|
dev_dbg(&s->spi->dev, "%04x - %04x\n", tx, *rx);
|
|
return 0;
|
|
}
|
|
|
|
static int max3100_handlerx(struct max3100_port *s, u16 rx)
|
|
{
|
|
unsigned int ch, flg, status = 0;
|
|
int ret = 0, cts;
|
|
|
|
if (rx & MAX3100_R && s->rx_enabled) {
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
ch = rx & (s->parity & MAX3100_7BIT ? 0x7f : 0xff);
|
|
if (rx & MAX3100_RAFE) {
|
|
s->port.icount.frame++;
|
|
flg = TTY_FRAME;
|
|
status |= MAX3100_STATUS_FE;
|
|
} else {
|
|
if (s->parity & MAX3100_PARITY_ON) {
|
|
if (max3100_check_parity(s, rx)) {
|
|
s->port.icount.rx++;
|
|
flg = TTY_NORMAL;
|
|
} else {
|
|
s->port.icount.parity++;
|
|
flg = TTY_PARITY;
|
|
status |= MAX3100_STATUS_PE;
|
|
}
|
|
} else {
|
|
s->port.icount.rx++;
|
|
flg = TTY_NORMAL;
|
|
}
|
|
}
|
|
uart_insert_char(&s->port, status, MAX3100_STATUS_OE, ch, flg);
|
|
ret = 1;
|
|
}
|
|
|
|
cts = (rx & MAX3100_CTS) > 0;
|
|
if (s->cts != cts) {
|
|
s->cts = cts;
|
|
uart_handle_cts_change(&s->port, cts ? TIOCM_CTS : 0);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void max3100_work(struct work_struct *w)
|
|
{
|
|
struct max3100_port *s = container_of(w, struct max3100_port, work);
|
|
int rxchars;
|
|
u16 tx, rx;
|
|
int conf, cconf, rts, crts;
|
|
struct circ_buf *xmit = &s->port.state->xmit;
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
|
|
rxchars = 0;
|
|
do {
|
|
spin_lock(&s->conf_lock);
|
|
conf = s->conf;
|
|
cconf = s->conf_commit;
|
|
s->conf_commit = 0;
|
|
rts = s->rts;
|
|
crts = s->rts_commit;
|
|
s->rts_commit = 0;
|
|
spin_unlock(&s->conf_lock);
|
|
if (cconf)
|
|
max3100_sr(s, MAX3100_WC | conf, &rx);
|
|
if (crts) {
|
|
max3100_sr(s, MAX3100_WD | MAX3100_TE |
|
|
(s->rts ? MAX3100_RTS : 0), &rx);
|
|
rxchars += max3100_handlerx(s, rx);
|
|
}
|
|
|
|
max3100_sr(s, MAX3100_RD, &rx);
|
|
rxchars += max3100_handlerx(s, rx);
|
|
|
|
if (rx & MAX3100_T) {
|
|
tx = 0xffff;
|
|
if (s->port.x_char) {
|
|
tx = s->port.x_char;
|
|
s->port.icount.tx++;
|
|
s->port.x_char = 0;
|
|
} else if (!uart_circ_empty(xmit) &&
|
|
!uart_tx_stopped(&s->port)) {
|
|
tx = xmit->buf[xmit->tail];
|
|
xmit->tail = (xmit->tail + 1) &
|
|
(UART_XMIT_SIZE - 1);
|
|
s->port.icount.tx++;
|
|
}
|
|
if (tx != 0xffff) {
|
|
max3100_calc_parity(s, &tx);
|
|
tx |= MAX3100_WD | (s->rts ? MAX3100_RTS : 0);
|
|
max3100_sr(s, tx, &rx);
|
|
rxchars += max3100_handlerx(s, rx);
|
|
}
|
|
}
|
|
|
|
if (rxchars > 16) {
|
|
tty_flip_buffer_push(&s->port.state->port);
|
|
rxchars = 0;
|
|
}
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(&s->port);
|
|
|
|
} while (!s->force_end_work &&
|
|
!freezing(current) &&
|
|
((rx & MAX3100_R) ||
|
|
(!uart_circ_empty(xmit) &&
|
|
!uart_tx_stopped(&s->port))));
|
|
|
|
if (rxchars > 0)
|
|
tty_flip_buffer_push(&s->port.state->port);
|
|
}
|
|
|
|
static irqreturn_t max3100_irq(int irqno, void *dev_id)
|
|
{
|
|
struct max3100_port *s = dev_id;
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
|
|
max3100_dowork(s);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void max3100_enable_ms(struct uart_port *port)
|
|
{
|
|
struct max3100_port *s = container_of(port,
|
|
struct max3100_port,
|
|
port);
|
|
|
|
if (s->poll_time > 0)
|
|
mod_timer(&s->timer, jiffies);
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
}
|
|
|
|
static void max3100_start_tx(struct uart_port *port)
|
|
{
|
|
struct max3100_port *s = container_of(port,
|
|
struct max3100_port,
|
|
port);
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
|
|
max3100_dowork(s);
|
|
}
|
|
|
|
static void max3100_stop_rx(struct uart_port *port)
|
|
{
|
|
struct max3100_port *s = container_of(port,
|
|
struct max3100_port,
|
|
port);
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
|
|
s->rx_enabled = 0;
|
|
spin_lock(&s->conf_lock);
|
|
s->conf &= ~MAX3100_RM;
|
|
s->conf_commit = 1;
|
|
spin_unlock(&s->conf_lock);
|
|
max3100_dowork(s);
|
|
}
|
|
|
|
static unsigned int max3100_tx_empty(struct uart_port *port)
|
|
{
|
|
struct max3100_port *s = container_of(port,
|
|
struct max3100_port,
|
|
port);
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
|
|
/* may not be truly up-to-date */
|
|
max3100_dowork(s);
|
|
return s->tx_empty;
|
|
}
|
|
|
|
static unsigned int max3100_get_mctrl(struct uart_port *port)
|
|
{
|
|
struct max3100_port *s = container_of(port,
|
|
struct max3100_port,
|
|
port);
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
|
|
/* may not be truly up-to-date */
|
|
max3100_dowork(s);
|
|
/* always assert DCD and DSR since these lines are not wired */
|
|
return (s->cts ? TIOCM_CTS : 0) | TIOCM_DSR | TIOCM_CAR;
|
|
}
|
|
|
|
static void max3100_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
struct max3100_port *s = container_of(port,
|
|
struct max3100_port,
|
|
port);
|
|
int rts;
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
|
|
rts = (mctrl & TIOCM_RTS) > 0;
|
|
|
|
spin_lock(&s->conf_lock);
|
|
if (s->rts != rts) {
|
|
s->rts = rts;
|
|
s->rts_commit = 1;
|
|
max3100_dowork(s);
|
|
}
|
|
spin_unlock(&s->conf_lock);
|
|
}
|
|
|
|
static void
|
|
max3100_set_termios(struct uart_port *port, struct ktermios *termios,
|
|
struct ktermios *old)
|
|
{
|
|
struct max3100_port *s = container_of(port,
|
|
struct max3100_port,
|
|
port);
|
|
int baud = 0;
|
|
unsigned cflag;
|
|
u32 param_new, param_mask, parity = 0;
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
|
|
cflag = termios->c_cflag;
|
|
param_new = 0;
|
|
param_mask = 0;
|
|
|
|
baud = tty_termios_baud_rate(termios);
|
|
param_new = s->conf & MAX3100_BAUD;
|
|
switch (baud) {
|
|
case 300:
|
|
if (s->crystal)
|
|
baud = s->baud;
|
|
else
|
|
param_new = 15;
|
|
break;
|
|
case 600:
|
|
param_new = 14 + s->crystal;
|
|
break;
|
|
case 1200:
|
|
param_new = 13 + s->crystal;
|
|
break;
|
|
case 2400:
|
|
param_new = 12 + s->crystal;
|
|
break;
|
|
case 4800:
|
|
param_new = 11 + s->crystal;
|
|
break;
|
|
case 9600:
|
|
param_new = 10 + s->crystal;
|
|
break;
|
|
case 19200:
|
|
param_new = 9 + s->crystal;
|
|
break;
|
|
case 38400:
|
|
param_new = 8 + s->crystal;
|
|
break;
|
|
case 57600:
|
|
param_new = 1 + s->crystal;
|
|
break;
|
|
case 115200:
|
|
param_new = 0 + s->crystal;
|
|
break;
|
|
case 230400:
|
|
if (s->crystal)
|
|
param_new = 0;
|
|
else
|
|
baud = s->baud;
|
|
break;
|
|
default:
|
|
baud = s->baud;
|
|
}
|
|
tty_termios_encode_baud_rate(termios, baud, baud);
|
|
s->baud = baud;
|
|
param_mask |= MAX3100_BAUD;
|
|
|
|
if ((cflag & CSIZE) == CS8) {
|
|
param_new &= ~MAX3100_L;
|
|
parity &= ~MAX3100_7BIT;
|
|
} else {
|
|
param_new |= MAX3100_L;
|
|
parity |= MAX3100_7BIT;
|
|
cflag = (cflag & ~CSIZE) | CS7;
|
|
}
|
|
param_mask |= MAX3100_L;
|
|
|
|
if (cflag & CSTOPB)
|
|
param_new |= MAX3100_ST;
|
|
else
|
|
param_new &= ~MAX3100_ST;
|
|
param_mask |= MAX3100_ST;
|
|
|
|
if (cflag & PARENB) {
|
|
param_new |= MAX3100_PE;
|
|
parity |= MAX3100_PARITY_ON;
|
|
} else {
|
|
param_new &= ~MAX3100_PE;
|
|
parity &= ~MAX3100_PARITY_ON;
|
|
}
|
|
param_mask |= MAX3100_PE;
|
|
|
|
if (cflag & PARODD)
|
|
parity |= MAX3100_PARITY_ODD;
|
|
else
|
|
parity &= ~MAX3100_PARITY_ODD;
|
|
|
|
/* mask termios capabilities we don't support */
|
|
cflag &= ~CMSPAR;
|
|
termios->c_cflag = cflag;
|
|
|
|
s->port.ignore_status_mask = 0;
|
|
if (termios->c_iflag & IGNPAR)
|
|
s->port.ignore_status_mask |=
|
|
MAX3100_STATUS_PE | MAX3100_STATUS_FE |
|
|
MAX3100_STATUS_OE;
|
|
|
|
/* we are sending char from a workqueue so enable */
|
|
s->port.state->port.low_latency = 1;
|
|
|
|
if (s->poll_time > 0)
|
|
del_timer_sync(&s->timer);
|
|
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
|
|
spin_lock(&s->conf_lock);
|
|
s->conf = (s->conf & ~param_mask) | (param_new & param_mask);
|
|
s->conf_commit = 1;
|
|
s->parity = parity;
|
|
spin_unlock(&s->conf_lock);
|
|
max3100_dowork(s);
|
|
|
|
if (UART_ENABLE_MS(&s->port, termios->c_cflag))
|
|
max3100_enable_ms(&s->port);
|
|
}
|
|
|
|
static void max3100_shutdown(struct uart_port *port)
|
|
{
|
|
struct max3100_port *s = container_of(port,
|
|
struct max3100_port,
|
|
port);
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
|
|
if (s->suspending)
|
|
return;
|
|
|
|
s->force_end_work = 1;
|
|
|
|
if (s->poll_time > 0)
|
|
del_timer_sync(&s->timer);
|
|
|
|
if (s->workqueue) {
|
|
flush_workqueue(s->workqueue);
|
|
destroy_workqueue(s->workqueue);
|
|
s->workqueue = NULL;
|
|
}
|
|
if (s->irq)
|
|
free_irq(s->irq, s);
|
|
|
|
/* set shutdown mode to save power */
|
|
if (s->max3100_hw_suspend)
|
|
s->max3100_hw_suspend(1);
|
|
else {
|
|
u16 tx, rx;
|
|
|
|
tx = MAX3100_WC | MAX3100_SHDN;
|
|
max3100_sr(s, tx, &rx);
|
|
}
|
|
}
|
|
|
|
static int max3100_startup(struct uart_port *port)
|
|
{
|
|
struct max3100_port *s = container_of(port,
|
|
struct max3100_port,
|
|
port);
|
|
char b[12];
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
|
|
s->conf = MAX3100_RM;
|
|
s->baud = s->crystal ? 230400 : 115200;
|
|
s->rx_enabled = 1;
|
|
|
|
if (s->suspending)
|
|
return 0;
|
|
|
|
s->force_end_work = 0;
|
|
s->parity = 0;
|
|
s->rts = 0;
|
|
|
|
sprintf(b, "max3100-%d", s->minor);
|
|
s->workqueue = create_freezable_workqueue(b);
|
|
if (!s->workqueue) {
|
|
dev_warn(&s->spi->dev, "cannot create workqueue\n");
|
|
return -EBUSY;
|
|
}
|
|
INIT_WORK(&s->work, max3100_work);
|
|
|
|
if (request_irq(s->irq, max3100_irq,
|
|
IRQF_TRIGGER_FALLING, "max3100", s) < 0) {
|
|
dev_warn(&s->spi->dev, "cannot allocate irq %d\n", s->irq);
|
|
s->irq = 0;
|
|
destroy_workqueue(s->workqueue);
|
|
s->workqueue = NULL;
|
|
return -EBUSY;
|
|
}
|
|
|
|
if (s->loopback) {
|
|
u16 tx, rx;
|
|
tx = 0x4001;
|
|
max3100_sr(s, tx, &rx);
|
|
}
|
|
|
|
if (s->max3100_hw_suspend)
|
|
s->max3100_hw_suspend(0);
|
|
s->conf_commit = 1;
|
|
max3100_dowork(s);
|
|
/* wait for clock to settle */
|
|
msleep(50);
|
|
|
|
max3100_enable_ms(&s->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const char *max3100_type(struct uart_port *port)
|
|
{
|
|
struct max3100_port *s = container_of(port,
|
|
struct max3100_port,
|
|
port);
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
|
|
return s->port.type == PORT_MAX3100 ? "MAX3100" : NULL;
|
|
}
|
|
|
|
static void max3100_release_port(struct uart_port *port)
|
|
{
|
|
struct max3100_port *s = container_of(port,
|
|
struct max3100_port,
|
|
port);
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
}
|
|
|
|
static void max3100_config_port(struct uart_port *port, int flags)
|
|
{
|
|
struct max3100_port *s = container_of(port,
|
|
struct max3100_port,
|
|
port);
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
|
|
if (flags & UART_CONFIG_TYPE)
|
|
s->port.type = PORT_MAX3100;
|
|
}
|
|
|
|
static int max3100_verify_port(struct uart_port *port,
|
|
struct serial_struct *ser)
|
|
{
|
|
struct max3100_port *s = container_of(port,
|
|
struct max3100_port,
|
|
port);
|
|
int ret = -EINVAL;
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
|
|
if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3100)
|
|
ret = 0;
|
|
return ret;
|
|
}
|
|
|
|
static void max3100_stop_tx(struct uart_port *port)
|
|
{
|
|
struct max3100_port *s = container_of(port,
|
|
struct max3100_port,
|
|
port);
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
}
|
|
|
|
static int max3100_request_port(struct uart_port *port)
|
|
{
|
|
struct max3100_port *s = container_of(port,
|
|
struct max3100_port,
|
|
port);
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
return 0;
|
|
}
|
|
|
|
static void max3100_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
struct max3100_port *s = container_of(port,
|
|
struct max3100_port,
|
|
port);
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
}
|
|
|
|
static const struct uart_ops max3100_ops = {
|
|
.tx_empty = max3100_tx_empty,
|
|
.set_mctrl = max3100_set_mctrl,
|
|
.get_mctrl = max3100_get_mctrl,
|
|
.stop_tx = max3100_stop_tx,
|
|
.start_tx = max3100_start_tx,
|
|
.stop_rx = max3100_stop_rx,
|
|
.enable_ms = max3100_enable_ms,
|
|
.break_ctl = max3100_break_ctl,
|
|
.startup = max3100_startup,
|
|
.shutdown = max3100_shutdown,
|
|
.set_termios = max3100_set_termios,
|
|
.type = max3100_type,
|
|
.release_port = max3100_release_port,
|
|
.request_port = max3100_request_port,
|
|
.config_port = max3100_config_port,
|
|
.verify_port = max3100_verify_port,
|
|
};
|
|
|
|
static struct uart_driver max3100_uart_driver = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = "ttyMAX",
|
|
.dev_name = "ttyMAX",
|
|
.major = MAX3100_MAJOR,
|
|
.minor = MAX3100_MINOR,
|
|
.nr = MAX_MAX3100,
|
|
};
|
|
static int uart_driver_registered;
|
|
|
|
static int max3100_probe(struct spi_device *spi)
|
|
{
|
|
int i, retval;
|
|
struct plat_max3100 *pdata;
|
|
u16 tx, rx;
|
|
|
|
mutex_lock(&max3100s_lock);
|
|
|
|
if (!uart_driver_registered) {
|
|
uart_driver_registered = 1;
|
|
retval = uart_register_driver(&max3100_uart_driver);
|
|
if (retval) {
|
|
printk(KERN_ERR "Couldn't register max3100 uart driver\n");
|
|
mutex_unlock(&max3100s_lock);
|
|
return retval;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < MAX_MAX3100; i++)
|
|
if (!max3100s[i])
|
|
break;
|
|
if (i == MAX_MAX3100) {
|
|
dev_warn(&spi->dev, "too many MAX3100 chips\n");
|
|
mutex_unlock(&max3100s_lock);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
max3100s[i] = kzalloc(sizeof(struct max3100_port), GFP_KERNEL);
|
|
if (!max3100s[i]) {
|
|
dev_warn(&spi->dev,
|
|
"kmalloc for max3100 structure %d failed!\n", i);
|
|
mutex_unlock(&max3100s_lock);
|
|
return -ENOMEM;
|
|
}
|
|
max3100s[i]->spi = spi;
|
|
max3100s[i]->irq = spi->irq;
|
|
spin_lock_init(&max3100s[i]->conf_lock);
|
|
spi_set_drvdata(spi, max3100s[i]);
|
|
pdata = dev_get_platdata(&spi->dev);
|
|
max3100s[i]->crystal = pdata->crystal;
|
|
max3100s[i]->loopback = pdata->loopback;
|
|
max3100s[i]->poll_time = msecs_to_jiffies(pdata->poll_time);
|
|
if (pdata->poll_time > 0 && max3100s[i]->poll_time == 0)
|
|
max3100s[i]->poll_time = 1;
|
|
max3100s[i]->max3100_hw_suspend = pdata->max3100_hw_suspend;
|
|
max3100s[i]->minor = i;
|
|
init_timer(&max3100s[i]->timer);
|
|
max3100s[i]->timer.function = max3100_timeout;
|
|
max3100s[i]->timer.data = (unsigned long) max3100s[i];
|
|
|
|
dev_dbg(&spi->dev, "%s: adding port %d\n", __func__, i);
|
|
max3100s[i]->port.irq = max3100s[i]->irq;
|
|
max3100s[i]->port.uartclk = max3100s[i]->crystal ? 3686400 : 1843200;
|
|
max3100s[i]->port.fifosize = 16;
|
|
max3100s[i]->port.ops = &max3100_ops;
|
|
max3100s[i]->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF;
|
|
max3100s[i]->port.line = i;
|
|
max3100s[i]->port.type = PORT_MAX3100;
|
|
max3100s[i]->port.dev = &spi->dev;
|
|
retval = uart_add_one_port(&max3100_uart_driver, &max3100s[i]->port);
|
|
if (retval < 0)
|
|
dev_warn(&spi->dev,
|
|
"uart_add_one_port failed for line %d with error %d\n",
|
|
i, retval);
|
|
|
|
/* set shutdown mode to save power. Will be woken-up on open */
|
|
if (max3100s[i]->max3100_hw_suspend)
|
|
max3100s[i]->max3100_hw_suspend(1);
|
|
else {
|
|
tx = MAX3100_WC | MAX3100_SHDN;
|
|
max3100_sr(max3100s[i], tx, &rx);
|
|
}
|
|
mutex_unlock(&max3100s_lock);
|
|
return 0;
|
|
}
|
|
|
|
static int max3100_remove(struct spi_device *spi)
|
|
{
|
|
struct max3100_port *s = spi_get_drvdata(spi);
|
|
int i;
|
|
|
|
mutex_lock(&max3100s_lock);
|
|
|
|
/* find out the index for the chip we are removing */
|
|
for (i = 0; i < MAX_MAX3100; i++)
|
|
if (max3100s[i] == s) {
|
|
dev_dbg(&spi->dev, "%s: removing port %d\n", __func__, i);
|
|
uart_remove_one_port(&max3100_uart_driver, &max3100s[i]->port);
|
|
kfree(max3100s[i]);
|
|
max3100s[i] = NULL;
|
|
break;
|
|
}
|
|
|
|
WARN_ON(i == MAX_MAX3100);
|
|
|
|
/* check if this is the last chip we have */
|
|
for (i = 0; i < MAX_MAX3100; i++)
|
|
if (max3100s[i]) {
|
|
mutex_unlock(&max3100s_lock);
|
|
return 0;
|
|
}
|
|
pr_debug("removing max3100 driver\n");
|
|
uart_unregister_driver(&max3100_uart_driver);
|
|
|
|
mutex_unlock(&max3100s_lock);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
|
|
static int max3100_suspend(struct device *dev)
|
|
{
|
|
struct max3100_port *s = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
|
|
disable_irq(s->irq);
|
|
|
|
s->suspending = 1;
|
|
uart_suspend_port(&max3100_uart_driver, &s->port);
|
|
|
|
if (s->max3100_hw_suspend)
|
|
s->max3100_hw_suspend(1);
|
|
else {
|
|
/* no HW suspend, so do SW one */
|
|
u16 tx, rx;
|
|
|
|
tx = MAX3100_WC | MAX3100_SHDN;
|
|
max3100_sr(s, tx, &rx);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int max3100_resume(struct device *dev)
|
|
{
|
|
struct max3100_port *s = dev_get_drvdata(dev);
|
|
|
|
dev_dbg(&s->spi->dev, "%s\n", __func__);
|
|
|
|
if (s->max3100_hw_suspend)
|
|
s->max3100_hw_suspend(0);
|
|
uart_resume_port(&max3100_uart_driver, &s->port);
|
|
s->suspending = 0;
|
|
|
|
enable_irq(s->irq);
|
|
|
|
s->conf_commit = 1;
|
|
if (s->workqueue)
|
|
max3100_dowork(s);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(max3100_pm_ops, max3100_suspend, max3100_resume);
|
|
#define MAX3100_PM_OPS (&max3100_pm_ops)
|
|
|
|
#else
|
|
#define MAX3100_PM_OPS NULL
|
|
#endif
|
|
|
|
static struct spi_driver max3100_driver = {
|
|
.driver = {
|
|
.name = "max3100",
|
|
.pm = MAX3100_PM_OPS,
|
|
},
|
|
.probe = max3100_probe,
|
|
.remove = max3100_remove,
|
|
};
|
|
|
|
module_spi_driver(max3100_driver);
|
|
|
|
MODULE_DESCRIPTION("MAX3100 driver");
|
|
MODULE_AUTHOR("Christian Pellegrin <chripell@evolware.org>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("spi:max3100");
|