redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/rtc/rtc-twl.c
Todd Poynor 7e72c68634 rtc: twl: Fix registration vs. init order 
Only register as an RTC device after the hardware has been
successfully initialized.  The RTC class driver will call
back to this driver to read a pending alarm, and other
drivers watching for new devices on the RTC class may
read the RTC time upon registration.  Such access might
occur while the RTC is stopped, prior to clearing
pending alarms, etc.

The new ordering also avoids leaving the platform
device drvdata set to an unregistered struct rtc_device *
on probe errors.

Signed-off-by: Todd Poynor <toddpoynor@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-08-26 17:26:54 -07:00

586 lines
14 KiB
C
Raw Blame History

/*
* rtc-twl.c -- TWL Real Time Clock interface
*
* Copyright (C) 2007 MontaVista Software, Inc
* Author: Alexandre Rusev <source@mvista.com>
*
* Based on original TI driver twl4030-rtc.c
* Copyright (C) 2006 Texas Instruments, Inc.
*
* Based on rtc-omap.c
* Copyright (C) 2003 MontaVista Software, Inc.
* Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com>
* Copyright (C) 2006 David Brownell
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/rtc.h>
#include <linux/bcd.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/i2c/twl.h>
/*
* RTC block register offsets (use TWL_MODULE_RTC)
*/
enum {
REG_SECONDS_REG = 0,
REG_MINUTES_REG,
REG_HOURS_REG,
REG_DAYS_REG,
REG_MONTHS_REG,
REG_YEARS_REG,
REG_WEEKS_REG,
REG_ALARM_SECONDS_REG,
REG_ALARM_MINUTES_REG,
REG_ALARM_HOURS_REG,
REG_ALARM_DAYS_REG,
REG_ALARM_MONTHS_REG,
REG_ALARM_YEARS_REG,
REG_RTC_CTRL_REG,
REG_RTC_STATUS_REG,
REG_RTC_INTERRUPTS_REG,
REG_RTC_COMP_LSB_REG,
REG_RTC_COMP_MSB_REG,
};
static const u8 twl4030_rtc_reg_map[] = {
[REG_SECONDS_REG] = 0x00,
[REG_MINUTES_REG] = 0x01,
[REG_HOURS_REG] = 0x02,
[REG_DAYS_REG] = 0x03,
[REG_MONTHS_REG] = 0x04,
[REG_YEARS_REG] = 0x05,
[REG_WEEKS_REG] = 0x06,
[REG_ALARM_SECONDS_REG] = 0x07,
[REG_ALARM_MINUTES_REG] = 0x08,
[REG_ALARM_HOURS_REG] = 0x09,
[REG_ALARM_DAYS_REG] = 0x0A,
[REG_ALARM_MONTHS_REG] = 0x0B,
[REG_ALARM_YEARS_REG] = 0x0C,
[REG_RTC_CTRL_REG] = 0x0D,
[REG_RTC_STATUS_REG] = 0x0E,
[REG_RTC_INTERRUPTS_REG] = 0x0F,
[REG_RTC_COMP_LSB_REG] = 0x10,
[REG_RTC_COMP_MSB_REG] = 0x11,
};
static const u8 twl6030_rtc_reg_map[] = {
[REG_SECONDS_REG] = 0x00,
[REG_MINUTES_REG] = 0x01,
[REG_HOURS_REG] = 0x02,
[REG_DAYS_REG] = 0x03,
[REG_MONTHS_REG] = 0x04,
[REG_YEARS_REG] = 0x05,
[REG_WEEKS_REG] = 0x06,
[REG_ALARM_SECONDS_REG] = 0x08,
[REG_ALARM_MINUTES_REG] = 0x09,
[REG_ALARM_HOURS_REG] = 0x0A,
[REG_ALARM_DAYS_REG] = 0x0B,
[REG_ALARM_MONTHS_REG] = 0x0C,
[REG_ALARM_YEARS_REG] = 0x0D,
[REG_RTC_CTRL_REG] = 0x10,
[REG_RTC_STATUS_REG] = 0x11,
[REG_RTC_INTERRUPTS_REG] = 0x12,
[REG_RTC_COMP_LSB_REG] = 0x13,
[REG_RTC_COMP_MSB_REG] = 0x14,
};
/* RTC_CTRL_REG bitfields */
#define BIT_RTC_CTRL_REG_STOP_RTC_M 0x01
#define BIT_RTC_CTRL_REG_ROUND_30S_M 0x02
#define BIT_RTC_CTRL_REG_AUTO_COMP_M 0x04
#define BIT_RTC_CTRL_REG_MODE_12_24_M 0x08
#define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10
#define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20
#define BIT_RTC_CTRL_REG_GET_TIME_M 0x40
/* RTC_STATUS_REG bitfields */
#define BIT_RTC_STATUS_REG_RUN_M 0x02
#define BIT_RTC_STATUS_REG_1S_EVENT_M 0x04
#define BIT_RTC_STATUS_REG_1M_EVENT_M 0x08
#define BIT_RTC_STATUS_REG_1H_EVENT_M 0x10
#define BIT_RTC_STATUS_REG_1D_EVENT_M 0x20
#define BIT_RTC_STATUS_REG_ALARM_M 0x40
#define BIT_RTC_STATUS_REG_POWER_UP_M 0x80
/* RTC_INTERRUPTS_REG bitfields */
#define BIT_RTC_INTERRUPTS_REG_EVERY_M 0x03
#define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M 0x04
#define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M 0x08
/* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */
#define ALL_TIME_REGS 6
/*----------------------------------------------------------------------*/
static u8 *rtc_reg_map;
/*
* Supports 1 byte read from TWL RTC register.
*/
static int twl_rtc_read_u8(u8 *data, u8 reg)
{
int ret;
ret = twl_i2c_read_u8(TWL_MODULE_RTC, data, (rtc_reg_map[reg]));
if (ret < 0)
pr_err("twl_rtc: Could not read TWL"
"register %X - error %d\n", reg, ret);
return ret;
}
/*
* Supports 1 byte write to TWL RTC registers.
*/
static int twl_rtc_write_u8(u8 data, u8 reg)
{
int ret;
ret = twl_i2c_write_u8(TWL_MODULE_RTC, data, (rtc_reg_map[reg]));
if (ret < 0)
pr_err("twl_rtc: Could not write TWL"
"register %X - error %d\n", reg, ret);
return ret;
}
/*
* Cache the value for timer/alarm interrupts register; this is
* only changed by callers holding rtc ops lock (or resume).
*/
static unsigned char rtc_irq_bits;
/*
* Enable 1/second update and/or alarm interrupts.
*/
static int set_rtc_irq_bit(unsigned char bit)
{
unsigned char val;
int ret;
val = rtc_irq_bits | bit;
val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M;
ret = twl_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
if (ret == 0)
rtc_irq_bits = val;
return ret;
}
/*
* Disable update and/or alarm interrupts.
*/
static int mask_rtc_irq_bit(unsigned char bit)
{
unsigned char val;
int ret;
val = rtc_irq_bits & ~bit;
ret = twl_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG);
if (ret == 0)
rtc_irq_bits = val;
return ret;
}
static int twl_rtc_alarm_irq_enable(struct device *dev, unsigned enabled)
{
int ret;
if (enabled)
ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
else
ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
return ret;
}
/*
* Gets current TWL RTC time and date parameters.
*
* The RTC's time/alarm representation is not what gmtime(3) requires
* Linux to use:
*
* - Months are 1..12 vs Linux 0-11
* - Years are 0..99 vs Linux 1900..N (we assume 21st century)
*/
static int twl_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
unsigned char rtc_data[ALL_TIME_REGS + 1];
int ret;
u8 save_control;
ret = twl_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
if (ret < 0)
return ret;
save_control |= BIT_RTC_CTRL_REG_GET_TIME_M;
ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
if (ret < 0)
return ret;
ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data,
(rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS);
if (ret < 0) {
dev_err(dev, "rtc_read_time error %d\n", ret);
return ret;
}
tm->tm_sec = bcd2bin(rtc_data[0]);
tm->tm_min = bcd2bin(rtc_data[1]);
tm->tm_hour = bcd2bin(rtc_data[2]);
tm->tm_mday = bcd2bin(rtc_data[3]);
tm->tm_mon = bcd2bin(rtc_data[4]) - 1;
tm->tm_year = bcd2bin(rtc_data[5]) + 100;
return ret;
}
static int twl_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
unsigned char save_control;
unsigned char rtc_data[ALL_TIME_REGS + 1];
int ret;
rtc_data[1] = bin2bcd(tm->tm_sec);
rtc_data[2] = bin2bcd(tm->tm_min);
rtc_data[3] = bin2bcd(tm->tm_hour);
rtc_data[4] = bin2bcd(tm->tm_mday);
rtc_data[5] = bin2bcd(tm->tm_mon + 1);
rtc_data[6] = bin2bcd(tm->tm_year - 100);
/* Stop RTC while updating the TC registers */
ret = twl_rtc_read_u8(&save_control, REG_RTC_CTRL_REG);
if (ret < 0)
goto out;
save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M;
ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
if (ret < 0)
goto out;
/* update all the time registers in one shot */
ret = twl_i2c_write(TWL_MODULE_RTC, rtc_data,
(rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS);
if (ret < 0) {
dev_err(dev, "rtc_set_time error %d\n", ret);
goto out;
}
/* Start back RTC */
save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M;
ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG);
out:
return ret;
}
/*
* Gets current TWL RTC alarm time.
*/
static int twl_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
{
unsigned char rtc_data[ALL_TIME_REGS + 1];
int ret;
ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data,
(rtc_reg_map[REG_ALARM_SECONDS_REG]), ALL_TIME_REGS);
if (ret < 0) {
dev_err(dev, "rtc_read_alarm error %d\n", ret);
return ret;
}
/* some of these fields may be wildcard/"match all" */
alm->time.tm_sec = bcd2bin(rtc_data[0]);
alm->time.tm_min = bcd2bin(rtc_data[1]);
alm->time.tm_hour = bcd2bin(rtc_data[2]);
alm->time.tm_mday = bcd2bin(rtc_data[3]);
alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1;
alm->time.tm_year = bcd2bin(rtc_data[5]) + 100;
/* report cached alarm enable state */
if (rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M)
alm->enabled = 1;
return ret;
}
static int twl_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
{
unsigned char alarm_data[ALL_TIME_REGS + 1];
int ret;
ret = twl_rtc_alarm_irq_enable(dev, 0);
if (ret)
goto out;
alarm_data[1] = bin2bcd(alm->time.tm_sec);
alarm_data[2] = bin2bcd(alm->time.tm_min);
alarm_data[3] = bin2bcd(alm->time.tm_hour);
alarm_data[4] = bin2bcd(alm->time.tm_mday);
alarm_data[5] = bin2bcd(alm->time.tm_mon + 1);
alarm_data[6] = bin2bcd(alm->time.tm_year - 100);
/* update all the alarm registers in one shot */
ret = twl_i2c_write(TWL_MODULE_RTC, alarm_data,
(rtc_reg_map[REG_ALARM_SECONDS_REG]), ALL_TIME_REGS);
if (ret) {
dev_err(dev, "rtc_set_alarm error %d\n", ret);
goto out;
}
if (alm->enabled)
ret = twl_rtc_alarm_irq_enable(dev, 1);
out:
return ret;
}
static irqreturn_t twl_rtc_interrupt(int irq, void *rtc)
{
unsigned long events = 0;
int ret = IRQ_NONE;
int res;
u8 rd_reg;
res = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
if (res)
goto out;
/*
* Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG.
* only one (ALARM or RTC) interrupt source may be enabled
* at time, we also could check our results
* by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM]
*/
if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
events |= RTC_IRQF | RTC_AF;
else
events |= RTC_IRQF | RTC_UF;
res = twl_rtc_write_u8(rd_reg | BIT_RTC_STATUS_REG_ALARM_M,
REG_RTC_STATUS_REG);
if (res)
goto out;
if (twl_class_is_4030()) {
/* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1
* needs 2 reads to clear the interrupt. One read is done in
* do_twl_pwrirq(). Doing the second read, to clear
* the bit.
*
* FIXME the reason PWR_ISR1 needs an extra read is that
* RTC_IF retriggered until we cleared REG_ALARM_M above.
* But re-reading like this is a bad hack; by doing so we
* risk wrongly clearing status for some other IRQ (losing
* the interrupt). Be smarter about handling RTC_UF ...
*/
res = twl_i2c_read_u8(TWL4030_MODULE_INT,
&rd_reg, TWL4030_INT_PWR_ISR1);
if (res)
goto out;
}
/* Notify RTC core on event */
rtc_update_irq(rtc, 1, events);
ret = IRQ_HANDLED;
out:
return ret;
}
static struct rtc_class_ops twl_rtc_ops = {
.read_time = twl_rtc_read_time,
.set_time = twl_rtc_set_time,
.read_alarm = twl_rtc_read_alarm,
.set_alarm = twl_rtc_set_alarm,
.alarm_irq_enable = twl_rtc_alarm_irq_enable,
};
/*----------------------------------------------------------------------*/
static int __devinit twl_rtc_probe(struct platform_device *pdev)
{
struct rtc_device *rtc;
int ret = -EINVAL;
int irq = platform_get_irq(pdev, 0);
u8 rd_reg;
if (irq <= 0)
goto out1;
ret = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
if (ret < 0)
goto out1;
if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M)
dev_warn(&pdev->dev, "Power up reset detected.\n");
if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M)
dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n");
/* Clear RTC Power up reset and pending alarm interrupts */
ret = twl_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG);
if (ret < 0)
goto out1;
if (twl_class_is_6030()) {
twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
REG_INT_MSK_LINE_A);
twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
REG_INT_MSK_STS_A);
}
/* Check RTC module status, Enable if it is off */
ret = twl_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG);
if (ret < 0)
goto out1;
if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) {
dev_info(&pdev->dev, "Enabling TWL-RTC.\n");
rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M;
ret = twl_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG);
if (ret < 0)
goto out1;
}
/* init cached IRQ enable bits */
ret = twl_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
if (ret < 0)
goto out1;
rtc = rtc_device_register(pdev->name,
&pdev->dev, &twl_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc)) {
ret = PTR_ERR(rtc);
dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
PTR_ERR(rtc));
goto out1;
}
ret = request_threaded_irq(irq, NULL, twl_rtc_interrupt,
IRQF_TRIGGER_RISING,
dev_name(&rtc->dev), rtc);
if (ret < 0) {
dev_err(&pdev->dev, "IRQ is not free.\n");
goto out2;
}
platform_set_drvdata(pdev, rtc);
return 0;
out2:
rtc_device_unregister(rtc);
out1:
return ret;
}
/*
* Disable all TWL RTC module interrupts.
* Sets status flag to free.
*/
static int __devexit twl_rtc_remove(struct platform_device *pdev)
{
/* leave rtc running, but disable irqs */
struct rtc_device *rtc = platform_get_drvdata(pdev);
int irq = platform_get_irq(pdev, 0);
mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
if (twl_class_is_6030()) {
twl6030_interrupt_mask(TWL6030_RTC_INT_MASK,
REG_INT_MSK_LINE_A);
twl6030_interrupt_mask(TWL6030_RTC_INT_MASK,
REG_INT_MSK_STS_A);
}
free_irq(irq, rtc);
rtc_device_unregister(rtc);
platform_set_drvdata(pdev, NULL);
return 0;
}
static void twl_rtc_shutdown(struct platform_device *pdev)
{
/* mask timer interrupts, but leave alarm interrupts on to enable
power-on when alarm is triggered */
mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
}
#ifdef CONFIG_PM
static unsigned char irqstat;
static int twl_rtc_suspend(struct platform_device *pdev, pm_message_t state)
{
irqstat = rtc_irq_bits;
mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
return 0;
}
static int twl_rtc_resume(struct platform_device *pdev)
{
set_rtc_irq_bit(irqstat);
return 0;
}
#else
#define twl_rtc_suspend NULL
#define twl_rtc_resume NULL
#endif
MODULE_ALIAS("platform:twl_rtc");
static struct platform_driver twl4030rtc_driver = {
.probe = twl_rtc_probe,
.remove = __devexit_p(twl_rtc_remove),
.shutdown = twl_rtc_shutdown,
.suspend = twl_rtc_suspend,
.resume = twl_rtc_resume,
.driver = {
.owner = THIS_MODULE,
.name = "twl_rtc",
},
};
static int __init twl_rtc_init(void)
{
if (twl_class_is_4030())
rtc_reg_map = (u8 *) twl4030_rtc_reg_map;
else
rtc_reg_map = (u8 *) twl6030_rtc_reg_map;
return platform_driver_register(&twl4030rtc_driver);
}
module_init(twl_rtc_init);
static void __exit twl_rtc_exit(void)
{
platform_driver_unregister(&twl4030rtc_driver);
}
module_exit(twl_rtc_exit);
MODULE_AUTHOR("Texas Instruments, MontaVista Software");
MODULE_LICENSE("GPL");
View git blame Copy permalink