alistair23-linux/net/mac80211/rate.h
Adrian Bunk e5f5e7339c build algorithms into the mac80211 module
The old infrastructure was:
- the default algorithm is built into mac80211
- other algorithms get into their own modules

The implementation of this complicated scheme was horrible
(just look at net/mac80211/Makefile), and anyone adding a new
algorithm would most likely not get it right at his first attempt.

This patch therefore builds all enabled algorithms into the mac80211
module.

The user interface for the rate control algorithms changes as follows:
- first the user can choose which algorithms to enable (currently only
  MAC80211_RC_PID is available)
- if more than one algorithm is enabled (currently not possible since
  only one algorithm is present) the user then chooses the default one

Note:
- MAC80211_RC_PID is always enables for CONFIG_EMBEDDED=n

Technical changes:
- all selected algorithms get into the mac80211 module
- net/mac80211/Makefile can now become much less complicated
- support for rc80211_pid_algo.c being modular is no longer required
- this includes unexporting mesh_plink_broken

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-06-30 17:37:34 -04:00

179 lines
4.8 KiB
C

/*
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005, Devicescape Software, Inc.
* Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef IEEE80211_RATE_H
#define IEEE80211_RATE_H
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/types.h>
#include <linux/kref.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "sta_info.h"
/**
* struct rate_selection - rate selection for rate control algos
* @rate: selected transmission rate index
* @nonerp: Non-ERP rate to use instead if ERP cannot be used
* @probe: rate for probing (or -1)
*
*/
struct rate_selection {
s8 rate_idx, nonerp_idx, probe_idx;
};
struct rate_control_ops {
struct module *module;
const char *name;
void (*tx_status)(void *priv, struct net_device *dev,
struct sk_buff *skb);
void (*get_rate)(void *priv, struct net_device *dev,
struct ieee80211_supported_band *band,
struct sk_buff *skb,
struct rate_selection *sel);
void (*rate_init)(void *priv, void *priv_sta,
struct ieee80211_local *local, struct sta_info *sta);
void (*clear)(void *priv);
void *(*alloc)(struct ieee80211_local *local);
void (*free)(void *priv);
void *(*alloc_sta)(void *priv, gfp_t gfp);
void (*free_sta)(void *priv, void *priv_sta);
int (*add_attrs)(void *priv, struct kobject *kobj);
void (*remove_attrs)(void *priv, struct kobject *kobj);
void (*add_sta_debugfs)(void *priv, void *priv_sta,
struct dentry *dir);
void (*remove_sta_debugfs)(void *priv, void *priv_sta);
};
struct rate_control_ref {
struct rate_control_ops *ops;
void *priv;
struct kref kref;
};
int ieee80211_rate_control_register(struct rate_control_ops *ops);
void ieee80211_rate_control_unregister(struct rate_control_ops *ops);
/* Get a reference to the rate control algorithm. If `name' is NULL, get the
* first available algorithm. */
struct rate_control_ref *rate_control_alloc(const char *name,
struct ieee80211_local *local);
void rate_control_get_rate(struct net_device *dev,
struct ieee80211_supported_band *sband,
struct sk_buff *skb,
struct rate_selection *sel);
struct rate_control_ref *rate_control_get(struct rate_control_ref *ref);
void rate_control_put(struct rate_control_ref *ref);
static inline void rate_control_tx_status(struct net_device *dev,
struct sk_buff *skb)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct rate_control_ref *ref = local->rate_ctrl;
ref->ops->tx_status(ref->priv, dev, skb);
}
static inline void rate_control_rate_init(struct sta_info *sta,
struct ieee80211_local *local)
{
struct rate_control_ref *ref = sta->rate_ctrl;
ref->ops->rate_init(ref->priv, sta->rate_ctrl_priv, local, sta);
}
static inline void rate_control_clear(struct ieee80211_local *local)
{
struct rate_control_ref *ref = local->rate_ctrl;
ref->ops->clear(ref->priv);
}
static inline void *rate_control_alloc_sta(struct rate_control_ref *ref,
gfp_t gfp)
{
return ref->ops->alloc_sta(ref->priv, gfp);
}
static inline void rate_control_free_sta(struct rate_control_ref *ref,
void *priv)
{
ref->ops->free_sta(ref->priv, priv);
}
static inline void rate_control_add_sta_debugfs(struct sta_info *sta)
{
#ifdef CONFIG_MAC80211_DEBUGFS
struct rate_control_ref *ref = sta->rate_ctrl;
if (sta->debugfs.dir && ref->ops->add_sta_debugfs)
ref->ops->add_sta_debugfs(ref->priv, sta->rate_ctrl_priv,
sta->debugfs.dir);
#endif
}
static inline void rate_control_remove_sta_debugfs(struct sta_info *sta)
{
#ifdef CONFIG_MAC80211_DEBUGFS
struct rate_control_ref *ref = sta->rate_ctrl;
if (ref->ops->remove_sta_debugfs)
ref->ops->remove_sta_debugfs(ref->priv, sta->rate_ctrl_priv);
#endif
}
static inline int rate_supported(struct sta_info *sta,
enum ieee80211_band band,
int index)
{
return (sta == NULL || sta->supp_rates[band] & BIT(index));
}
static inline s8
rate_lowest_index(struct ieee80211_local *local,
struct ieee80211_supported_band *sband,
struct sta_info *sta)
{
int i;
for (i = 0; i < sband->n_bitrates; i++)
if (rate_supported(sta, sband->band, i))
return i;
/* warn when we cannot find a rate. */
WARN_ON(1);
return 0;
}
/* functions for rate control related to a device */
int ieee80211_init_rate_ctrl_alg(struct ieee80211_local *local,
const char *name);
void rate_control_deinitialize(struct ieee80211_local *local);
/* Rate control algorithms */
#ifdef CONFIG_MAC80211_RC_PID
extern int rc80211_pid_init(void);
extern void rc80211_pid_exit(void);
#else
static inline int rc80211_pid_init(void)
{
return 0;
}
static inline void rc80211_pid_exit(void)
{
}
#endif
#endif /* IEEE80211_RATE_H */