![Jussi Kivilinna](/assets/img/avatar_default.png)
New driver for wireless RNDIS devices. So far only known chip that uses wireless RNDIS is Broadcom 4320. Driver detects all RNDIS devices that have RNDIS wireless physical medium. At least following devices are detected: Buffalo WLI-U2-KG125S U.S. Robotics USR5421 Belkin F5D7051 Linksys WUSB54GSv2 Linksys WUSB54GSC Asus WL169gE Eminent EM4045 BT Voyager 1055 Linksys WUSB54GSv1 U.S. Robotics USR5420 BUFFALO WLI-USB-G54 Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
761 lines
26 KiB
Plaintext
761 lines
26 KiB
Plaintext
#
|
|
# Wireless LAN device configuration
|
|
#
|
|
|
|
menu "Wireless LAN"
|
|
depends on !S390
|
|
|
|
config WLAN_PRE80211
|
|
bool "Wireless LAN (pre-802.11)"
|
|
depends on NETDEVICES
|
|
---help---
|
|
Say Y if you have any pre-802.11 wireless LAN hardware.
|
|
|
|
This option does not affect the kernel build, it only
|
|
lets you choose drivers.
|
|
|
|
config STRIP
|
|
tristate "STRIP (Metricom starmode radio IP)"
|
|
depends on INET && WLAN_PRE80211
|
|
select WIRELESS_EXT
|
|
---help---
|
|
Say Y if you have a Metricom radio and intend to use Starmode Radio
|
|
IP. STRIP is a radio protocol developed for the MosquitoNet project
|
|
(on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
|
|
traffic using Metricom radios. Metricom radios are small, battery
|
|
powered, 100kbit/sec packet radio transceivers, about the size and
|
|
weight of a cellular telephone. (You may also have heard them called
|
|
"Metricom modems" but we avoid the term "modem" because it misleads
|
|
many people into thinking that you can plug a Metricom modem into a
|
|
phone line and use it as a modem.)
|
|
|
|
You can use STRIP on any Linux machine with a serial port, although
|
|
it is obviously most useful for people with laptop computers. If you
|
|
think you might get a Metricom radio in the future, there is no harm
|
|
in saying Y to STRIP now, except that it makes the kernel a bit
|
|
bigger.
|
|
|
|
To compile this as a module, choose M here: the module will be
|
|
called strip.
|
|
|
|
config ARLAN
|
|
tristate "Aironet Arlan 655 & IC2200 DS support"
|
|
depends on ISA && !64BIT && WLAN_PRE80211
|
|
select WIRELESS_EXT
|
|
---help---
|
|
Aironet makes Arlan, a class of wireless LAN adapters. These use the
|
|
www.Telxon.com chip, which is also used on several similar cards.
|
|
This driver is tested on the 655 and IC2200 series cards. Look at
|
|
<http://www.ylenurme.ee/~elmer/655/> for the latest information.
|
|
|
|
The driver is built as two modules, arlan and arlan-proc. The latter
|
|
is the /proc interface and is not needed most of time.
|
|
|
|
On some computers the card ends up in non-valid state after some
|
|
time. Use a ping-reset script to clear it.
|
|
|
|
config WAVELAN
|
|
tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
|
|
depends on ISA && WLAN_PRE80211
|
|
select WIRELESS_EXT
|
|
---help---
|
|
The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
|
|
a Radio LAN (wireless Ethernet-like Local Area Network) using the
|
|
radio frequencies 900 MHz and 2.4 GHz.
|
|
|
|
If you want to use an ISA WaveLAN card under Linux, say Y and read
|
|
the Ethernet-HOWTO, available from
|
|
<http://www.tldp.org/docs.html#howto>. Some more specific
|
|
information is contained in
|
|
<file:Documentation/networking/wavelan.txt> and in the source code
|
|
<file:drivers/net/wireless/wavelan.p.h>.
|
|
|
|
You will also need the wireless tools package available from
|
|
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
|
|
Please read the man pages contained therein.
|
|
|
|
To compile this driver as a module, choose M here: the module will be
|
|
called wavelan.
|
|
|
|
config PCMCIA_WAVELAN
|
|
tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
|
|
depends on PCMCIA && WLAN_PRE80211
|
|
select WIRELESS_EXT
|
|
help
|
|
Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
|
|
(PC-card) wireless Ethernet networking card to your computer. This
|
|
driver is for the non-IEEE-802.11 Wavelan cards.
|
|
|
|
To compile this driver as a module, choose M here: the module will be
|
|
called wavelan_cs. If unsure, say N.
|
|
|
|
config PCMCIA_NETWAVE
|
|
tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
|
|
depends on PCMCIA && WLAN_PRE80211
|
|
select WIRELESS_EXT
|
|
help
|
|
Say Y here if you intend to attach this type of PCMCIA (PC-card)
|
|
wireless Ethernet networking card to your computer.
|
|
|
|
To compile this driver as a module, choose M here: the module will be
|
|
called netwave_cs. If unsure, say N.
|
|
|
|
|
|
config WLAN_80211
|
|
bool "Wireless LAN (IEEE 802.11)"
|
|
depends on NETDEVICES
|
|
---help---
|
|
Say Y if you have any 802.11 wireless LAN hardware.
|
|
|
|
This option does not affect the kernel build, it only
|
|
lets you choose drivers.
|
|
|
|
config PCMCIA_RAYCS
|
|
tristate "Aviator/Raytheon 2.4MHz wireless support"
|
|
depends on PCMCIA && WLAN_80211
|
|
select WIRELESS_EXT
|
|
---help---
|
|
Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
|
|
(PC-card) wireless Ethernet networking card to your computer.
|
|
Please read the file <file:Documentation/networking/ray_cs.txt> for
|
|
details.
|
|
|
|
To compile this driver as a module, choose M here: the module will be
|
|
called ray_cs. If unsure, say N.
|
|
|
|
config IPW2100
|
|
tristate "Intel PRO/Wireless 2100 Network Connection"
|
|
depends on PCI && WLAN_80211
|
|
select WIRELESS_EXT
|
|
select FW_LOADER
|
|
select IEEE80211
|
|
---help---
|
|
A driver for the Intel PRO/Wireless 2100 Network
|
|
Connection 802.11b wireless network adapter.
|
|
|
|
See <file:Documentation/networking/README.ipw2100> for information on
|
|
the capabilities currently enabled in this driver and for tips
|
|
for debugging issues and problems.
|
|
|
|
In order to use this driver, you will need a firmware image for it.
|
|
You can obtain the firmware from
|
|
<http://ipw2100.sf.net/>. Once you have the firmware image, you
|
|
will need to place it in /lib/firmware.
|
|
|
|
You will also very likely need the Wireless Tools in order to
|
|
configure your card:
|
|
|
|
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
|
|
|
|
If you want to compile the driver as a module ( = code which can be
|
|
inserted in and removed from the running kernel whenever you want),
|
|
say M here and read <file:Documentation/kbuild/modules.txt>.
|
|
The module will be called ipw2100.ko.
|
|
|
|
config IPW2100_MONITOR
|
|
bool "Enable promiscuous mode"
|
|
depends on IPW2100
|
|
---help---
|
|
Enables promiscuous/monitor mode support for the ipw2100 driver.
|
|
With this feature compiled into the driver, you can switch to
|
|
promiscuous mode via the Wireless Tool's Monitor mode. While in this
|
|
mode, no packets can be sent.
|
|
|
|
config IPW2100_DEBUG
|
|
bool "Enable full debugging output in IPW2100 module."
|
|
depends on IPW2100
|
|
---help---
|
|
This option will enable debug tracing output for the IPW2100.
|
|
|
|
This will result in the kernel module being ~60k larger. You can
|
|
control which debug output is sent to the kernel log by setting the
|
|
value in
|
|
|
|
/sys/bus/pci/drivers/ipw2100/debug_level
|
|
|
|
This entry will only exist if this option is enabled.
|
|
|
|
If you are not trying to debug or develop the IPW2100 driver, you
|
|
most likely want to say N here.
|
|
|
|
config IPW2200
|
|
tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
|
|
depends on PCI && WLAN_80211
|
|
select WIRELESS_EXT
|
|
select FW_LOADER
|
|
select IEEE80211
|
|
---help---
|
|
A driver for the Intel PRO/Wireless 2200BG and 2915ABG Network
|
|
Connection adapters.
|
|
|
|
See <file:Documentation/networking/README.ipw2200> for
|
|
information on the capabilities currently enabled in this
|
|
driver and for tips for debugging issues and problems.
|
|
|
|
In order to use this driver, you will need a firmware image for it.
|
|
You can obtain the firmware from
|
|
<http://ipw2200.sf.net/>. See the above referenced README.ipw2200
|
|
for information on where to install the firmware images.
|
|
|
|
You will also very likely need the Wireless Tools in order to
|
|
configure your card:
|
|
|
|
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
|
|
|
|
If you want to compile the driver as a module ( = code which can be
|
|
inserted in and removed from the running kernel whenever you want),
|
|
say M here and read <file:Documentation/kbuild/modules.txt>.
|
|
The module will be called ipw2200.ko.
|
|
|
|
config IPW2200_MONITOR
|
|
bool "Enable promiscuous mode"
|
|
depends on IPW2200
|
|
---help---
|
|
Enables promiscuous/monitor mode support for the ipw2200 driver.
|
|
With this feature compiled into the driver, you can switch to
|
|
promiscuous mode via the Wireless Tool's Monitor mode. While in this
|
|
mode, no packets can be sent.
|
|
|
|
config IPW2200_RADIOTAP
|
|
bool "Enable radiotap format 802.11 raw packet support"
|
|
depends on IPW2200_MONITOR
|
|
|
|
config IPW2200_PROMISCUOUS
|
|
bool "Enable creation of a RF radiotap promiscuous interface"
|
|
depends on IPW2200_MONITOR
|
|
select IPW2200_RADIOTAP
|
|
---help---
|
|
Enables the creation of a second interface prefixed 'rtap'.
|
|
This second interface will provide every received in radiotap
|
|
format.
|
|
|
|
This is useful for performing wireless network analysis while
|
|
maintaining an active association.
|
|
|
|
Example usage:
|
|
|
|
% modprobe ipw2200 rtap_iface=1
|
|
% ifconfig rtap0 up
|
|
% tethereal -i rtap0
|
|
|
|
If you do not specify 'rtap_iface=1' as a module parameter then
|
|
the rtap interface will not be created and you will need to turn
|
|
it on via sysfs:
|
|
|
|
% echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
|
|
|
|
config IPW2200_QOS
|
|
bool "Enable QoS support"
|
|
depends on IPW2200 && EXPERIMENTAL
|
|
|
|
config IPW2200_DEBUG
|
|
bool "Enable full debugging output in IPW2200 module."
|
|
depends on IPW2200
|
|
---help---
|
|
This option will enable low level debug tracing output for IPW2200.
|
|
|
|
Note, normal debug code is already compiled in. This low level
|
|
debug option enables debug on hot paths (e.g Tx, Rx, ISR) and
|
|
will result in the kernel module being ~70 larger. Most users
|
|
will typically not need this high verbosity debug information.
|
|
|
|
If you are not sure, say N here.
|
|
|
|
config LIBERTAS
|
|
tristate "Marvell 8xxx Libertas WLAN driver support"
|
|
depends on WLAN_80211
|
|
select WIRELESS_EXT
|
|
select IEEE80211
|
|
select FW_LOADER
|
|
---help---
|
|
A library for Marvell Libertas 8xxx devices.
|
|
|
|
config LIBERTAS_USB
|
|
tristate "Marvell Libertas 8388 USB 802.11b/g cards"
|
|
depends on LIBERTAS && USB
|
|
---help---
|
|
A driver for Marvell Libertas 8388 USB devices.
|
|
|
|
config LIBERTAS_CS
|
|
tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
|
|
depends on LIBERTAS && PCMCIA && EXPERIMENTAL
|
|
select FW_LOADER
|
|
---help---
|
|
A driver for Marvell Libertas 8385 CompactFlash devices.
|
|
|
|
config LIBERTAS_SDIO
|
|
tristate "Marvell Libertas 8385 and 8686 SDIO 802.11b/g cards"
|
|
depends on LIBERTAS && MMC
|
|
---help---
|
|
A driver for Marvell Libertas 8385 and 8686 SDIO devices.
|
|
|
|
config LIBERTAS_DEBUG
|
|
bool "Enable full debugging output in the Libertas module."
|
|
depends on LIBERTAS
|
|
---help---
|
|
Debugging support.
|
|
|
|
config AIRO
|
|
tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
|
|
depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN)
|
|
select WIRELESS_EXT
|
|
select CRYPTO
|
|
---help---
|
|
This is the standard Linux driver to support Cisco/Aironet ISA and
|
|
PCI 802.11 wireless cards.
|
|
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
|
|
- with or without encryption) as well as card before the Cisco
|
|
acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
|
|
|
|
This driver support both the standard Linux Wireless Extensions
|
|
and Cisco proprietary API, so both the Linux Wireless Tools and the
|
|
Cisco Linux utilities can be used to configure the card.
|
|
|
|
The driver can be compiled as a module and will be named "airo".
|
|
|
|
config HERMES
|
|
tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
|
|
depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211
|
|
select WIRELESS_EXT
|
|
---help---
|
|
A driver for 802.11b wireless cards based on the "Hermes" or
|
|
Intersil HFA384x (Prism 2) MAC controller. This includes the vast
|
|
majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
|
|
- except for the Cisco/Aironet cards. Cards supported include the
|
|
Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
|
|
Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
|
|
IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
|
|
MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
|
|
IPW2011, and Symbol Spectrum24 High Rate amongst others.
|
|
|
|
This option includes the guts of the driver, but in order to
|
|
actually use a card you will also need to enable support for PCMCIA
|
|
Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.
|
|
|
|
You will also very likely also need the Wireless Tools in order to
|
|
configure your card and that /etc/pcmcia/wireless.opts works :
|
|
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
|
|
|
|
config APPLE_AIRPORT
|
|
tristate "Apple Airport support (built-in)"
|
|
depends on PPC_PMAC && HERMES
|
|
help
|
|
Say Y here to support the Airport 802.11b wireless Ethernet hardware
|
|
built into the Macintosh iBook and other recent PowerPC-based
|
|
Macintosh machines. This is essentially a Lucent Orinoco card with
|
|
a non-standard interface.
|
|
|
|
This driver does not support the Airport Extreme (802.11b/g). Use
|
|
the BCM43xx driver for Airport Extreme cards.
|
|
|
|
config PLX_HERMES
|
|
tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.)"
|
|
depends on PCI && HERMES
|
|
help
|
|
Enable support for PCMCIA cards supported by the "Hermes" (aka
|
|
orinoco) driver when used in PLX9052 based PCI adaptors. These
|
|
adaptors are not a full PCMCIA controller but act as a more limited
|
|
PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
|
|
802.11b PCMCIA cards can be used in desktop machines. The Netgear
|
|
MA301 is such an adaptor.
|
|
|
|
config TMD_HERMES
|
|
tristate "Hermes in TMD7160 based PCI adaptor support"
|
|
depends on PCI && HERMES
|
|
help
|
|
Enable support for PCMCIA cards supported by the "Hermes" (aka
|
|
orinoco) driver when used in TMD7160 based PCI adaptors. These
|
|
adaptors are not a full PCMCIA controller but act as a more limited
|
|
PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
|
|
802.11b PCMCIA cards can be used in desktop machines.
|
|
|
|
config NORTEL_HERMES
|
|
tristate "Nortel emobility PCI adaptor support"
|
|
depends on PCI && HERMES
|
|
help
|
|
Enable support for PCMCIA cards supported by the "Hermes" (aka
|
|
orinoco) driver when used in Nortel emobility PCI adaptors. These
|
|
adaptors are not full PCMCIA controllers, but act as a more limited
|
|
PCI <-> PCMCIA bridge.
|
|
|
|
config PCI_HERMES
|
|
tristate "Prism 2.5 PCI 802.11b adaptor support"
|
|
depends on PCI && HERMES
|
|
help
|
|
Enable support for PCI and mini-PCI 802.11b wireless NICs based on
|
|
the Prism 2.5 chipset. These are true PCI cards, not the 802.11b
|
|
PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
|
|
common. Some of the built-in wireless adaptors in laptops are of
|
|
this variety.
|
|
|
|
config PCMCIA_HERMES
|
|
tristate "Hermes PCMCIA card support"
|
|
depends on PCMCIA && HERMES
|
|
---help---
|
|
A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
|
|
as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
|
|
EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
|
|
others). It should also be usable on various Prism II based cards
|
|
such as the Linksys, D-Link and Farallon Skyline. It should also
|
|
work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
|
|
|
|
You will very likely need the Wireless Tools in order to
|
|
configure your card and that /etc/pcmcia/wireless.opts works:
|
|
<http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
|
|
|
|
config PCMCIA_SPECTRUM
|
|
tristate "Symbol Spectrum24 Trilogy PCMCIA card support"
|
|
depends on PCMCIA && HERMES
|
|
select FW_LOADER
|
|
---help---
|
|
|
|
This is a driver for 802.11b cards using RAM-loadable Symbol
|
|
firmware, such as Symbol Wireless Networker LA4100, CompactFlash
|
|
cards by Socket Communications and Intel PRO/Wireless 2011B.
|
|
|
|
This driver requires firmware download on startup. Utilities
|
|
for downloading Symbol firmware are available at
|
|
<http://sourceforge.net/projects/orinoco/>
|
|
|
|
config ATMEL
|
|
tristate "Atmel at76c50x chipset 802.11b support"
|
|
depends on (PCI || PCMCIA) && WLAN_80211
|
|
select WIRELESS_EXT
|
|
select FW_LOADER
|
|
select CRC32
|
|
---help---
|
|
A driver 802.11b wireless cards based on the Atmel fast-vnet
|
|
chips. This driver supports standard Linux wireless extensions.
|
|
|
|
Many cards based on this chipset do not have flash memory
|
|
and need their firmware loaded at start-up. If yours is
|
|
one of these, you will need to provide a firmware image
|
|
to be loaded into the card by the driver. The Atmel
|
|
firmware package can be downloaded from
|
|
<http://www.thekelleys.org.uk/atmel>
|
|
|
|
config PCI_ATMEL
|
|
tristate "Atmel at76c506 PCI cards"
|
|
depends on ATMEL && PCI
|
|
---help---
|
|
Enable support for PCI and mini-PCI cards containing the
|
|
Atmel at76c506 chip.
|
|
|
|
config PCMCIA_ATMEL
|
|
tristate "Atmel at76c502/at76c504 PCMCIA cards"
|
|
depends on ATMEL && PCMCIA
|
|
select WIRELESS_EXT
|
|
select FW_LOADER
|
|
select CRC32
|
|
---help---
|
|
Enable support for PCMCIA cards containing the
|
|
Atmel at76c502 and at76c504 chips.
|
|
|
|
config AIRO_CS
|
|
tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
|
|
depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211
|
|
select WIRELESS_EXT
|
|
select CRYPTO
|
|
select CRYPTO_AES
|
|
---help---
|
|
This is the standard Linux driver to support Cisco/Aironet PCMCIA
|
|
802.11 wireless cards. This driver is the same as the Aironet
|
|
driver part of the Linux Pcmcia package.
|
|
It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
|
|
- with or without encryption) as well as card before the Cisco
|
|
acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
|
|
supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
|
|
802.11b cards.
|
|
|
|
This driver support both the standard Linux Wireless Extensions
|
|
and Cisco proprietary API, so both the Linux Wireless Tools and the
|
|
Cisco Linux utilities can be used to configure the card.
|
|
|
|
config PCMCIA_WL3501
|
|
tristate "Planet WL3501 PCMCIA cards"
|
|
depends on EXPERIMENTAL && PCMCIA && WLAN_80211
|
|
select WIRELESS_EXT
|
|
---help---
|
|
A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
|
|
It has basic support for Linux wireless extensions and initial
|
|
micro support for ethtool.
|
|
|
|
config PRISM54
|
|
tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus'
|
|
depends on PCI && EXPERIMENTAL && WLAN_80211
|
|
select WIRELESS_EXT
|
|
select FW_LOADER
|
|
---help---
|
|
Enable PCI and Cardbus support for the following chipset based cards:
|
|
|
|
ISL3880 - Prism GT 802.11 b/g
|
|
ISL3877 - Prism Indigo 802.11 a
|
|
ISL3890 - Prism Duette 802.11 a/b/g
|
|
|
|
For a complete list of supported cards visit <http://prism54.org>.
|
|
Here is the latest confirmed list of supported cards:
|
|
|
|
3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1)
|
|
Allnet ALL0271 PCI Card
|
|
Compex WL54G Cardbus Card
|
|
Corega CG-WLCB54GT Cardbus Card
|
|
D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
|
|
I-O Data WN-G54/CB Cardbus Card
|
|
Kobishi XG-300 aka Z-Com Cardbus Card
|
|
Netgear WG511 Cardbus Card
|
|
Ovislink WL-5400PCI PCI Card
|
|
Peabird WLG-PCI PCI Card
|
|
Sitecom WL-100i Cardbus Card
|
|
Sitecom WL-110i PCI Card
|
|
SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
|
|
SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
|
|
SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
|
|
Z-Com XG-900 PCI Card
|
|
Zyxel G-100 Cardbus Card
|
|
|
|
If you enable this you will need a firmware file as well.
|
|
You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
|
|
You can get this non-GPL'd firmware file from the Prism54 project page:
|
|
<http://prism54.org>
|
|
You will also need the /etc/hotplug/firmware.agent script from
|
|
a current hotplug package.
|
|
|
|
Note: You need a motherboard with DMA support to use any of these cards
|
|
|
|
If you want to compile the driver as a module ( = code which can be
|
|
inserted in and removed from the running kernel whenever you want),
|
|
say M here and read <file:Documentation/kbuild/modules.txt>.
|
|
The module will be called prism54.ko.
|
|
|
|
config USB_ZD1201
|
|
tristate "USB ZD1201 based Wireless device support"
|
|
depends on USB && WLAN_80211
|
|
select WIRELESS_EXT
|
|
select FW_LOADER
|
|
---help---
|
|
Say Y if you want to use wireless LAN adapters based on the ZyDAS
|
|
ZD1201 chip.
|
|
|
|
This driver makes the adapter appear as a normal Ethernet interface,
|
|
typically on wlan0.
|
|
|
|
The zd1201 device requires external firmware to be loaded.
|
|
This can be found at http://linux-lc100020.sourceforge.net/
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
module will be called zd1201.
|
|
|
|
config USB_NET_RNDIS_WLAN
|
|
tristate "Wireless RNDIS USB support"
|
|
depends on USB && WLAN_80211 && EXPERIMENTAL
|
|
select USB_USBNET
|
|
select USB_NET_CDCETHER
|
|
select USB_NET_RNDIS_HOST
|
|
select WIRELESS_EXT
|
|
---help---
|
|
This is a driver for wireless RNDIS devices.
|
|
These are USB based adapters found in devices such as:
|
|
|
|
Buffalo WLI-U2-KG125S
|
|
U.S. Robotics USR5421
|
|
Belkin F5D7051
|
|
Linksys WUSB54GSv2
|
|
Linksys WUSB54GSC
|
|
Asus WL169gE
|
|
Eminent EM4045
|
|
BT Voyager 1055
|
|
Linksys WUSB54GSv1
|
|
U.S. Robotics USR5420
|
|
BUFFALO WLI-USB-G54
|
|
|
|
All of these devices are based on Broadcom 4320 chip which is the
|
|
only wireless RNDIS chip known to date.
|
|
|
|
If you choose to build a module, it'll be called rndis_wlan.
|
|
|
|
config RTL8180
|
|
tristate "Realtek 8180/8185 PCI support"
|
|
depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
|
|
select EEPROM_93CX6
|
|
---help---
|
|
This is a driver for RTL8180 and RTL8185 based cards.
|
|
These are PCI based chips found in cards such as:
|
|
|
|
(RTL8185 802.11g)
|
|
A-Link WL54PC
|
|
|
|
(RTL8180 802.11b)
|
|
Belkin F5D6020 v3
|
|
Belkin F5D6020 v3
|
|
Dlink DWL-610
|
|
Dlink DWL-510
|
|
Netgear MA521
|
|
Level-One WPC-0101
|
|
Acer Aspire 1357 LMi
|
|
VCTnet PC-11B1
|
|
Ovislink AirLive WL-1120PCM
|
|
Mentor WL-PCI
|
|
Linksys WPC11 v4
|
|
TrendNET TEW-288PI
|
|
D-Link DWL-520 Rev D
|
|
Repotec RP-WP7126
|
|
TP-Link TL-WN250/251
|
|
Zonet ZEW1000
|
|
Longshine LCS-8031-R
|
|
HomeLine HLW-PCC200
|
|
GigaFast WF721-AEX
|
|
Planet WL-3553
|
|
Encore ENLWI-PCI1-NT
|
|
TrendNET TEW-266PC
|
|
Gigabyte GN-WLMR101
|
|
Siemens-fujitsu Amilo D1840W
|
|
Edimax EW-7126
|
|
PheeNet WL-11PCIR
|
|
Tonze PC-2100T
|
|
Planet WL-8303
|
|
Dlink DWL-650 v M1
|
|
Edimax EW-7106
|
|
Q-Tec 770WC
|
|
Topcom Skyr@cer 4011b
|
|
Roper FreeLan 802.11b (edition 2004)
|
|
Wistron Neweb Corp CB-200B
|
|
Pentagram HorNET
|
|
QTec 775WC
|
|
TwinMOS Booming B Series
|
|
Micronet SP906BB
|
|
Sweex LC700010
|
|
Surecom EP-9428
|
|
Safecom SWLCR-1100
|
|
|
|
Thanks to Realtek for their support!
|
|
|
|
config RTL8187
|
|
tristate "Realtek 8187 USB support"
|
|
depends on MAC80211 && USB && WLAN_80211 && EXPERIMENTAL
|
|
select EEPROM_93CX6
|
|
---help---
|
|
This is a driver for RTL8187 based cards.
|
|
These are USB based chips found in cards such as:
|
|
|
|
Netgear WG111v2
|
|
|
|
Thanks to Realtek for their support!
|
|
|
|
config ADM8211
|
|
tristate "ADMtek ADM8211 support"
|
|
depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
|
|
select CRC32
|
|
select EEPROM_93CX6
|
|
---help---
|
|
This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
|
|
These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
|
|
|
|
Xterasys Cardbus XN-2411b
|
|
Blitz NetWave Point PC
|
|
TrendNet 221pc
|
|
Belkin F5D6001
|
|
SMC 2635W
|
|
Linksys WPC11 v1
|
|
Fiberline FL-WL-200X
|
|
3com Office Connect (3CRSHPW796)
|
|
Corega WLPCIB-11
|
|
SMC 2602W V2 EU
|
|
D-Link DWL-520 Revision C
|
|
|
|
However, some of these cards have been replaced with other chips
|
|
like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
|
|
the Ralink RT2400 (SMC2635W) without a model number change.
|
|
|
|
Thanks to Infineon-ADMtek for their support of this driver.
|
|
|
|
config P54_COMMON
|
|
tristate "Softmac Prism54 support"
|
|
depends on MAC80211 && WLAN_80211 && FW_LOADER && EXPERIMENTAL
|
|
---help---
|
|
This is common code for isl38xx based cards.
|
|
This module does nothing by itself - the USB/PCI frontends
|
|
also need to be enabled in order to support any devices.
|
|
|
|
These devices require softmac firmware which can be found at
|
|
http://prism54.org/
|
|
|
|
If you choose to build a module, it'll be called p54common.
|
|
|
|
config P54_USB
|
|
tristate "Prism54 USB support"
|
|
depends on P54_COMMON && USB
|
|
select CRC32
|
|
---help---
|
|
This driver is for USB isl38xx based wireless cards.
|
|
These are USB based adapters found in devices such as:
|
|
|
|
3COM 3CRWE254G72
|
|
SMC 2862W-G
|
|
Accton 802.11g WN4501 USB
|
|
Siemens Gigaset USB
|
|
Netgear WG121
|
|
Netgear WG111
|
|
Medion 40900, Roper Europe
|
|
Shuttle PN15, Airvast WM168g, IOGear GWU513
|
|
Linksys WUSB54G
|
|
Linksys WUSB54G Portable
|
|
DLink DWL-G120 Spinnaker
|
|
DLink DWL-G122
|
|
Belkin F5D7050 ver 1000
|
|
Cohiba Proto board
|
|
SMC 2862W-G version 2
|
|
U.S. Robotics U5 802.11g Adapter
|
|
FUJITSU E-5400 USB D1700
|
|
Sagem XG703A
|
|
DLink DWL-G120 Cohiba
|
|
Spinnaker Proto board
|
|
Linksys WUSB54AG
|
|
Inventel UR054G
|
|
Spinnaker DUT
|
|
|
|
These devices require softmac firmware which can be found at
|
|
http://prism54.org/
|
|
|
|
If you choose to build a module, it'll be called p54usb.
|
|
|
|
config P54_PCI
|
|
tristate "Prism54 PCI support"
|
|
depends on P54_COMMON && PCI
|
|
---help---
|
|
This driver is for PCI isl38xx based wireless cards.
|
|
This driver supports most devices that are supported by the
|
|
fullmac prism54 driver plus many devices which are not
|
|
supported by the fullmac driver/firmware.
|
|
|
|
This driver requires softmac firmware which can be found at
|
|
http://prism54.org/
|
|
|
|
If you choose to build a module, it'll be called p54pci.
|
|
|
|
config ATH5K
|
|
tristate "Atheros 5xxx wireless cards support"
|
|
depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
|
|
---help---
|
|
This module adds support for wireless adapters based on
|
|
Atheros 5xxx chipset.
|
|
|
|
Currently the following chip versions are supported:
|
|
|
|
MAC: AR5211 AR5212
|
|
PHY: RF5111/2111 RF5112/2112 RF5413/2413
|
|
|
|
This driver uses the kernel's mac80211 subsystem.
|
|
|
|
If you choose to build a module, it'll be called ath5k. Say M if
|
|
unsure.
|
|
|
|
source "drivers/net/wireless/iwlwifi/Kconfig"
|
|
source "drivers/net/wireless/hostap/Kconfig"
|
|
source "drivers/net/wireless/bcm43xx/Kconfig"
|
|
source "drivers/net/wireless/b43/Kconfig"
|
|
source "drivers/net/wireless/b43legacy/Kconfig"
|
|
source "drivers/net/wireless/zd1211rw/Kconfig"
|
|
source "drivers/net/wireless/rt2x00/Kconfig"
|
|
|
|
endmenu
|