![Milo Kim](/assets/img/avatar_default.png)
TI LP8788 PMU provides regulators, battery charger, ADC, RTC, backlight driver and current sinks. This MFD patch supports the I2C communication using the regmap, the interrupt handling using the linear IRQ domain and configurable platform data structures for each driver module. (Driver Architecture) < mfd devices > LP8788 HW .......... mfd .......... regulator drivers I2C power supply driver IRQs iio adc driver rtc driver backlight driver current sink drivers o regulators : LDOs and BUCKs o power supply : Battery charger o iio adc : Battery voltage/temperature o rtc : RTC and alarm o backlight o current sink : LED and vibrator All MFD device modules are registered by LP8788 MFD core driver. For sharing information such like the virtual IRQ number, MFD core driver uses the resource structure. Then each module can retrieve the specific IRQ number and detect it in the IRQ thread. Configurable platform data is handled in each driver module. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
246 lines
5.3 KiB
C
246 lines
5.3 KiB
C
/*
|
|
* TI LP8788 MFD - core interface
|
|
*
|
|
* Copyright 2012 Texas Instruments
|
|
*
|
|
* Author: Milo(Woogyom) Kim <milo.kim@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/mfd/core.h>
|
|
#include <linux/mfd/lp8788.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define MAX_LP8788_REGISTERS 0xA2
|
|
|
|
#define MFD_DEV_SIMPLE(_name) \
|
|
{ \
|
|
.name = LP8788_DEV_##_name, \
|
|
}
|
|
|
|
#define MFD_DEV_WITH_ID(_name, _id) \
|
|
{ \
|
|
.name = LP8788_DEV_##_name, \
|
|
.id = _id, \
|
|
}
|
|
|
|
#define MFD_DEV_WITH_RESOURCE(_name, _resource, num_resource) \
|
|
{ \
|
|
.name = LP8788_DEV_##_name, \
|
|
.resources = _resource, \
|
|
.num_resources = num_resource, \
|
|
}
|
|
|
|
static struct resource chg_irqs[] = {
|
|
/* Charger Interrupts */
|
|
{
|
|
.start = LP8788_INT_CHG_INPUT_STATE,
|
|
.end = LP8788_INT_PRECHG_TIMEOUT,
|
|
.name = LP8788_CHG_IRQ,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
/* Power Routing Switch Interrupts */
|
|
{
|
|
.start = LP8788_INT_ENTER_SYS_SUPPORT,
|
|
.end = LP8788_INT_EXIT_SYS_SUPPORT,
|
|
.name = LP8788_PRSW_IRQ,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
/* Battery Interrupts */
|
|
{
|
|
.start = LP8788_INT_BATT_LOW,
|
|
.end = LP8788_INT_NO_BATT,
|
|
.name = LP8788_BATT_IRQ,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct resource rtc_irqs[] = {
|
|
{
|
|
.start = LP8788_INT_RTC_ALARM1,
|
|
.end = LP8788_INT_RTC_ALARM2,
|
|
.name = LP8788_ALM_IRQ,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static struct mfd_cell lp8788_devs[] = {
|
|
/* 4 bucks */
|
|
MFD_DEV_WITH_ID(BUCK, 1),
|
|
MFD_DEV_WITH_ID(BUCK, 2),
|
|
MFD_DEV_WITH_ID(BUCK, 3),
|
|
MFD_DEV_WITH_ID(BUCK, 4),
|
|
|
|
/* 12 digital ldos */
|
|
MFD_DEV_WITH_ID(DLDO, 1),
|
|
MFD_DEV_WITH_ID(DLDO, 2),
|
|
MFD_DEV_WITH_ID(DLDO, 3),
|
|
MFD_DEV_WITH_ID(DLDO, 4),
|
|
MFD_DEV_WITH_ID(DLDO, 5),
|
|
MFD_DEV_WITH_ID(DLDO, 6),
|
|
MFD_DEV_WITH_ID(DLDO, 7),
|
|
MFD_DEV_WITH_ID(DLDO, 8),
|
|
MFD_DEV_WITH_ID(DLDO, 9),
|
|
MFD_DEV_WITH_ID(DLDO, 10),
|
|
MFD_DEV_WITH_ID(DLDO, 11),
|
|
MFD_DEV_WITH_ID(DLDO, 12),
|
|
|
|
/* 10 analog ldos */
|
|
MFD_DEV_WITH_ID(ALDO, 1),
|
|
MFD_DEV_WITH_ID(ALDO, 2),
|
|
MFD_DEV_WITH_ID(ALDO, 3),
|
|
MFD_DEV_WITH_ID(ALDO, 4),
|
|
MFD_DEV_WITH_ID(ALDO, 5),
|
|
MFD_DEV_WITH_ID(ALDO, 6),
|
|
MFD_DEV_WITH_ID(ALDO, 7),
|
|
MFD_DEV_WITH_ID(ALDO, 8),
|
|
MFD_DEV_WITH_ID(ALDO, 9),
|
|
MFD_DEV_WITH_ID(ALDO, 10),
|
|
|
|
/* ADC */
|
|
MFD_DEV_SIMPLE(ADC),
|
|
|
|
/* battery charger */
|
|
MFD_DEV_WITH_RESOURCE(CHARGER, chg_irqs, ARRAY_SIZE(chg_irqs)),
|
|
|
|
/* rtc */
|
|
MFD_DEV_WITH_RESOURCE(RTC, rtc_irqs, ARRAY_SIZE(rtc_irqs)),
|
|
|
|
/* backlight */
|
|
MFD_DEV_SIMPLE(BACKLIGHT),
|
|
|
|
/* current sink for vibrator */
|
|
MFD_DEV_SIMPLE(VIBRATOR),
|
|
|
|
/* current sink for keypad LED */
|
|
MFD_DEV_SIMPLE(KEYLED),
|
|
};
|
|
|
|
int lp8788_read_byte(struct lp8788 *lp, u8 reg, u8 *data)
|
|
{
|
|
int ret;
|
|
unsigned int val;
|
|
|
|
ret = regmap_read(lp->regmap, reg, &val);
|
|
if (ret < 0) {
|
|
dev_err(lp->dev, "failed to read 0x%.2x\n", reg);
|
|
return ret;
|
|
}
|
|
|
|
*data = (u8)val;
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(lp8788_read_byte);
|
|
|
|
int lp8788_read_multi_bytes(struct lp8788 *lp, u8 reg, u8 *data, size_t count)
|
|
{
|
|
return regmap_bulk_read(lp->regmap, reg, data, count);
|
|
}
|
|
EXPORT_SYMBOL_GPL(lp8788_read_multi_bytes);
|
|
|
|
int lp8788_write_byte(struct lp8788 *lp, u8 reg, u8 data)
|
|
{
|
|
return regmap_write(lp->regmap, reg, data);
|
|
}
|
|
EXPORT_SYMBOL_GPL(lp8788_write_byte);
|
|
|
|
int lp8788_update_bits(struct lp8788 *lp, u8 reg, u8 mask, u8 data)
|
|
{
|
|
return regmap_update_bits(lp->regmap, reg, mask, data);
|
|
}
|
|
EXPORT_SYMBOL_GPL(lp8788_update_bits);
|
|
|
|
static int lp8788_platform_init(struct lp8788 *lp)
|
|
{
|
|
struct lp8788_platform_data *pdata = lp->pdata;
|
|
|
|
return (pdata && pdata->init_func) ? pdata->init_func(lp) : 0;
|
|
}
|
|
|
|
static const struct regmap_config lp8788_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.max_register = MAX_LP8788_REGISTERS,
|
|
};
|
|
|
|
static int lp8788_probe(struct i2c_client *cl, const struct i2c_device_id *id)
|
|
{
|
|
struct lp8788 *lp;
|
|
struct lp8788_platform_data *pdata = cl->dev.platform_data;
|
|
int ret;
|
|
|
|
lp = devm_kzalloc(&cl->dev, sizeof(struct lp8788), GFP_KERNEL);
|
|
if (!lp)
|
|
return -ENOMEM;
|
|
|
|
lp->regmap = devm_regmap_init_i2c(cl, &lp8788_regmap_config);
|
|
if (IS_ERR(lp->regmap)) {
|
|
ret = PTR_ERR(lp->regmap);
|
|
dev_err(&cl->dev, "regmap init i2c err: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
lp->pdata = pdata;
|
|
lp->dev = &cl->dev;
|
|
i2c_set_clientdata(cl, lp);
|
|
|
|
ret = lp8788_platform_init(lp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = lp8788_irq_init(lp, cl->irq);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return mfd_add_devices(lp->dev, -1, lp8788_devs,
|
|
ARRAY_SIZE(lp8788_devs), NULL, 0, NULL);
|
|
}
|
|
|
|
static int __devexit lp8788_remove(struct i2c_client *cl)
|
|
{
|
|
struct lp8788 *lp = i2c_get_clientdata(cl);
|
|
|
|
mfd_remove_devices(lp->dev);
|
|
lp8788_irq_exit(lp);
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id lp8788_ids[] = {
|
|
{"lp8788", 0},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, lp8788_ids);
|
|
|
|
static struct i2c_driver lp8788_driver = {
|
|
.driver = {
|
|
.name = "lp8788",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = lp8788_probe,
|
|
.remove = __devexit_p(lp8788_remove),
|
|
.id_table = lp8788_ids,
|
|
};
|
|
|
|
static int __init lp8788_init(void)
|
|
{
|
|
return i2c_add_driver(&lp8788_driver);
|
|
}
|
|
subsys_initcall(lp8788_init);
|
|
|
|
static void __exit lp8788_exit(void)
|
|
{
|
|
i2c_del_driver(&lp8788_driver);
|
|
}
|
|
module_exit(lp8788_exit);
|
|
|
|
MODULE_DESCRIPTION("TI LP8788 MFD Driver");
|
|
MODULE_AUTHOR("Milo Kim");
|
|
MODULE_LICENSE("GPL");
|