![David Gibson](/assets/img/avatar_default.png)
Based on BenH's earlier work, this is a new version of the EMAC driver for the built-in ethernet found on PowerPC 4xx embedded CPUs. The same ASIC is also found in the Axon bridge chip. This new version is designed to work in the arch/powerpc tree, using the device tree to probe the device, rather than the old and ugly arch/ppc OCP layer. This driver is designed to sit alongside the old driver (that lies in drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The old driver is left in place to support arch/ppc until arch/ppc itself reaches its final demise (not too long now, with luck). This driver still has a number of things that could do with cleaning up, but I think they can be fixed up after merging. Specifically: - Should be adjusted to properly use the dma mapping API. Axon needs this. - Probe logic needs reworking, in conjuction with the general probing code for of_platform devices. The dependencies here between EMAC, MAL, ZMII etc. make this complicated. At present, it usually works, because we initialize and register the sub-drivers before the EMAC driver itself, and (being in driver code) runs after the devices themselves have been instantiated from the device tree. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
324 lines
7.2 KiB
C
324 lines
7.2 KiB
C
/*
|
|
* drivers/net/ibm_newemac/rgmii.c
|
|
*
|
|
* Driver for PowerPC 4xx on-chip ethernet controller, RGMII bridge support.
|
|
*
|
|
* Copyright (c) 2004, 2005 Zultys Technologies.
|
|
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
|
|
*
|
|
* Based on original work by
|
|
* Matt Porter <mporter@kernel.crashing.org>
|
|
* Copyright 2004 MontaVista Software, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/ethtool.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "emac.h"
|
|
#include "debug.h"
|
|
|
|
// XXX FIXME: Axon seems to support a subset of the RGMII, we
|
|
// thus need to take that into account and possibly change some
|
|
// of the bit settings below that don't seem to quite match the
|
|
// AXON spec
|
|
|
|
/* RGMIIx_FER */
|
|
#define RGMII_FER_MASK(idx) (0x7 << ((idx) * 4))
|
|
#define RGMII_FER_RTBI(idx) (0x4 << ((idx) * 4))
|
|
#define RGMII_FER_RGMII(idx) (0x5 << ((idx) * 4))
|
|
#define RGMII_FER_TBI(idx) (0x6 << ((idx) * 4))
|
|
#define RGMII_FER_GMII(idx) (0x7 << ((idx) * 4))
|
|
|
|
/* RGMIIx_SSR */
|
|
#define RGMII_SSR_MASK(idx) (0x7 << ((idx) * 8))
|
|
#define RGMII_SSR_100(idx) (0x2 << ((idx) * 8))
|
|
#define RGMII_SSR_1000(idx) (0x4 << ((idx) * 8))
|
|
|
|
/* RGMII bridge supports only GMII/TBI and RGMII/RTBI PHYs */
|
|
static inline int rgmii_valid_mode(int phy_mode)
|
|
{
|
|
return phy_mode == PHY_MODE_GMII ||
|
|
phy_mode == PHY_MODE_RGMII ||
|
|
phy_mode == PHY_MODE_TBI ||
|
|
phy_mode == PHY_MODE_RTBI;
|
|
}
|
|
|
|
static inline const char *rgmii_mode_name(int mode)
|
|
{
|
|
switch (mode) {
|
|
case PHY_MODE_RGMII:
|
|
return "RGMII";
|
|
case PHY_MODE_TBI:
|
|
return "TBI";
|
|
case PHY_MODE_GMII:
|
|
return "GMII";
|
|
case PHY_MODE_RTBI:
|
|
return "RTBI";
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
static inline u32 rgmii_mode_mask(int mode, int input)
|
|
{
|
|
switch (mode) {
|
|
case PHY_MODE_RGMII:
|
|
return RGMII_FER_RGMII(input);
|
|
case PHY_MODE_TBI:
|
|
return RGMII_FER_TBI(input);
|
|
case PHY_MODE_GMII:
|
|
return RGMII_FER_GMII(input);
|
|
case PHY_MODE_RTBI:
|
|
return RGMII_FER_RTBI(input);
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
int __devinit rgmii_attach(struct of_device *ofdev, int input, int mode)
|
|
{
|
|
struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
struct rgmii_regs *p = dev->base;
|
|
|
|
RGMII_DBG(dev, "attach(%d)" NL, input);
|
|
|
|
/* Check if we need to attach to a RGMII */
|
|
if (input < 0 || !rgmii_valid_mode(mode)) {
|
|
printk(KERN_ERR "%s: unsupported settings !\n",
|
|
ofdev->node->full_name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
/* Enable this input */
|
|
out_be32(&p->fer, in_be32(&p->fer) | rgmii_mode_mask(mode, input));
|
|
|
|
printk(KERN_NOTICE "%s: input %d in %s mode\n",
|
|
ofdev->node->full_name, input, rgmii_mode_name(mode));
|
|
|
|
++dev->users;
|
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void rgmii_set_speed(struct of_device *ofdev, int input, int speed)
|
|
{
|
|
struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
struct rgmii_regs *p = dev->base;
|
|
u32 ssr;
|
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
ssr = in_be32(&p->ssr) & ~RGMII_SSR_MASK(input);
|
|
|
|
RGMII_DBG(dev, "speed(%d, %d)" NL, input, speed);
|
|
|
|
if (speed == SPEED_1000)
|
|
ssr |= RGMII_SSR_1000(input);
|
|
else if (speed == SPEED_100)
|
|
ssr |= RGMII_SSR_100(input);
|
|
|
|
out_be32(&p->ssr, ssr);
|
|
|
|
mutex_unlock(&dev->lock);
|
|
}
|
|
|
|
void rgmii_get_mdio(struct of_device *ofdev, int input)
|
|
{
|
|
struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
struct rgmii_regs *p = dev->base;
|
|
u32 fer;
|
|
|
|
RGMII_DBG2(dev, "get_mdio(%d)" NL, input);
|
|
|
|
if (dev->type != RGMII_AXON)
|
|
return;
|
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
fer = in_be32(&p->fer);
|
|
fer |= 0x00080000u >> input;
|
|
out_be32(&p->fer, fer);
|
|
(void)in_be32(&p->fer);
|
|
|
|
DBG2(dev, " fer = 0x%08x\n", fer);
|
|
}
|
|
|
|
void rgmii_put_mdio(struct of_device *ofdev, int input)
|
|
{
|
|
struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
struct rgmii_regs *p = dev->base;
|
|
u32 fer;
|
|
|
|
RGMII_DBG2(dev, "put_mdio(%d)" NL, input);
|
|
|
|
if (dev->type != RGMII_AXON)
|
|
return;
|
|
|
|
fer = in_be32(&p->fer);
|
|
fer &= ~(0x00080000u >> input);
|
|
out_be32(&p->fer, fer);
|
|
(void)in_be32(&p->fer);
|
|
|
|
DBG2(dev, " fer = 0x%08x\n", fer);
|
|
|
|
mutex_unlock(&dev->lock);
|
|
}
|
|
|
|
void __devexit rgmii_detach(struct of_device *ofdev, int input)
|
|
{
|
|
struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
struct rgmii_regs *p = dev->base;
|
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
BUG_ON(!dev || dev->users == 0);
|
|
|
|
RGMII_DBG(dev, "detach(%d)" NL, input);
|
|
|
|
/* Disable this input */
|
|
out_be32(&p->fer, in_be32(&p->fer) & ~RGMII_FER_MASK(input));
|
|
|
|
--dev->users;
|
|
|
|
mutex_unlock(&dev->lock);
|
|
}
|
|
|
|
int rgmii_get_regs_len(struct of_device *ofdev)
|
|
{
|
|
return sizeof(struct emac_ethtool_regs_subhdr) +
|
|
sizeof(struct rgmii_regs);
|
|
}
|
|
|
|
void *rgmii_dump_regs(struct of_device *ofdev, void *buf)
|
|
{
|
|
struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
struct emac_ethtool_regs_subhdr *hdr = buf;
|
|
struct rgmii_regs *regs = (struct rgmii_regs *)(hdr + 1);
|
|
|
|
hdr->version = 0;
|
|
hdr->index = 0; /* for now, are there chips with more than one
|
|
* rgmii ? if yes, then we'll add a cell_index
|
|
* like we do for emac
|
|
*/
|
|
memcpy_fromio(regs, dev->base, sizeof(struct rgmii_regs));
|
|
return regs + 1;
|
|
}
|
|
|
|
|
|
static int __devinit rgmii_probe(struct of_device *ofdev,
|
|
const struct of_device_id *match)
|
|
{
|
|
struct device_node *np = ofdev->node;
|
|
struct rgmii_instance *dev;
|
|
struct resource regs;
|
|
int rc;
|
|
|
|
rc = -ENOMEM;
|
|
dev = kzalloc(sizeof(struct rgmii_instance), GFP_KERNEL);
|
|
if (dev == NULL) {
|
|
printk(KERN_ERR "%s: could not allocate RGMII device!\n",
|
|
np->full_name);
|
|
goto err_gone;
|
|
}
|
|
|
|
mutex_init(&dev->lock);
|
|
dev->ofdev = ofdev;
|
|
|
|
rc = -ENXIO;
|
|
if (of_address_to_resource(np, 0, ®s)) {
|
|
printk(KERN_ERR "%s: Can't get registers address\n",
|
|
np->full_name);
|
|
goto err_free;
|
|
}
|
|
|
|
rc = -ENOMEM;
|
|
dev->base = (struct rgmii_regs *)ioremap(regs.start,
|
|
sizeof(struct rgmii_regs));
|
|
if (dev->base == NULL) {
|
|
printk(KERN_ERR "%s: Can't map device registers!\n",
|
|
np->full_name);
|
|
goto err_free;
|
|
}
|
|
|
|
/* Check for RGMII type */
|
|
if (device_is_compatible(ofdev->node, "ibm,rgmii-axon"))
|
|
dev->type = RGMII_AXON;
|
|
else
|
|
dev->type = RGMII_STANDARD;
|
|
|
|
DBG2(dev, " Boot FER = 0x%08x, SSR = 0x%08x\n",
|
|
in_be32(&dev->base->fer), in_be32(&dev->base->ssr));
|
|
|
|
/* Disable all inputs by default */
|
|
out_be32(&dev->base->fer, 0);
|
|
|
|
printk(KERN_INFO
|
|
"RGMII %s %s initialized\n",
|
|
dev->type == RGMII_STANDARD ? "standard" : "axon",
|
|
ofdev->node->full_name);
|
|
|
|
wmb();
|
|
dev_set_drvdata(&ofdev->dev, dev);
|
|
|
|
return 0;
|
|
|
|
err_free:
|
|
kfree(dev);
|
|
err_gone:
|
|
return rc;
|
|
}
|
|
|
|
static int __devexit rgmii_remove(struct of_device *ofdev)
|
|
{
|
|
struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
|
|
dev_set_drvdata(&ofdev->dev, NULL);
|
|
|
|
WARN_ON(dev->users != 0);
|
|
|
|
iounmap(dev->base);
|
|
kfree(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct of_device_id rgmii_match[] =
|
|
{
|
|
{
|
|
.type = "rgmii-interface",
|
|
.compatible = "ibm,rgmii",
|
|
},
|
|
{
|
|
.type = "emac-rgmii",
|
|
},
|
|
{},
|
|
};
|
|
|
|
static struct of_platform_driver rgmii_driver = {
|
|
.name = "emac-rgmii",
|
|
.match_table = rgmii_match,
|
|
|
|
.probe = rgmii_probe,
|
|
.remove = rgmii_remove,
|
|
};
|
|
|
|
int __init rgmii_init(void)
|
|
{
|
|
return of_register_platform_driver(&rgmii_driver);
|
|
}
|
|
|
|
void rgmii_exit(void)
|
|
{
|
|
of_unregister_platform_driver(&rgmii_driver);
|
|
}
|