![David Gibson](/assets/img/avatar_default.png)
Based on BenH's earlier work, this is a new version of the EMAC driver for the built-in ethernet found on PowerPC 4xx embedded CPUs. The same ASIC is also found in the Axon bridge chip. This new version is designed to work in the arch/powerpc tree, using the device tree to probe the device, rather than the old and ugly arch/ppc OCP layer. This driver is designed to sit alongside the old driver (that lies in drivers/net/ibm_emac and this one in drivers/net/ibm_newemac). The old driver is left in place to support arch/ppc until arch/ppc itself reaches its final demise (not too long now, with luck). This driver still has a number of things that could do with cleaning up, but I think they can be fixed up after merging. Specifically: - Should be adjusted to properly use the dma mapping API. Axon needs this. - Probe logic needs reworking, in conjuction with the general probing code for of_platform devices. The dependencies here between EMAC, MAL, ZMII etc. make this complicated. At present, it usually works, because we initialize and register the sub-drivers before the EMAC driver itself, and (being in driver code) runs after the devices themselves have been instantiated from the device tree. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
323 lines
7.2 KiB
C
323 lines
7.2 KiB
C
/*
|
|
* drivers/net/ibm_newemac/zmii.c
|
|
*
|
|
* Driver for PowerPC 4xx on-chip ethernet controller, ZMII bridge support.
|
|
*
|
|
* Copyright (c) 2004, 2005 Zultys Technologies.
|
|
* Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
|
|
*
|
|
* Based on original work by
|
|
* Armin Kuster <akuster@mvista.com>
|
|
* Copyright 2001 MontaVista Softare Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/ethtool.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "emac.h"
|
|
#include "core.h"
|
|
|
|
/* ZMIIx_FER */
|
|
#define ZMII_FER_MDI(idx) (0x80000000 >> ((idx) * 4))
|
|
#define ZMII_FER_MDI_ALL (ZMII_FER_MDI(0) | ZMII_FER_MDI(1) | \
|
|
ZMII_FER_MDI(2) | ZMII_FER_MDI(3))
|
|
|
|
#define ZMII_FER_SMII(idx) (0x40000000 >> ((idx) * 4))
|
|
#define ZMII_FER_RMII(idx) (0x20000000 >> ((idx) * 4))
|
|
#define ZMII_FER_MII(idx) (0x10000000 >> ((idx) * 4))
|
|
|
|
/* ZMIIx_SSR */
|
|
#define ZMII_SSR_SCI(idx) (0x40000000 >> ((idx) * 4))
|
|
#define ZMII_SSR_FSS(idx) (0x20000000 >> ((idx) * 4))
|
|
#define ZMII_SSR_SP(idx) (0x10000000 >> ((idx) * 4))
|
|
|
|
/* ZMII only supports MII, RMII and SMII
|
|
* we also support autodetection for backward compatibility
|
|
*/
|
|
static inline int zmii_valid_mode(int mode)
|
|
{
|
|
return mode == PHY_MODE_MII ||
|
|
mode == PHY_MODE_RMII ||
|
|
mode == PHY_MODE_SMII ||
|
|
mode == PHY_MODE_NA;
|
|
}
|
|
|
|
static inline const char *zmii_mode_name(int mode)
|
|
{
|
|
switch (mode) {
|
|
case PHY_MODE_MII:
|
|
return "MII";
|
|
case PHY_MODE_RMII:
|
|
return "RMII";
|
|
case PHY_MODE_SMII:
|
|
return "SMII";
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
static inline u32 zmii_mode_mask(int mode, int input)
|
|
{
|
|
switch (mode) {
|
|
case PHY_MODE_MII:
|
|
return ZMII_FER_MII(input);
|
|
case PHY_MODE_RMII:
|
|
return ZMII_FER_RMII(input);
|
|
case PHY_MODE_SMII:
|
|
return ZMII_FER_SMII(input);
|
|
default:
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
int __devinit zmii_attach(struct of_device *ofdev, int input, int *mode)
|
|
{
|
|
struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
struct zmii_regs *p = dev->base;
|
|
|
|
ZMII_DBG(dev, "init(%d, %d)" NL, input, *mode);
|
|
|
|
if (!zmii_valid_mode(*mode))
|
|
/* Probably an EMAC connected to RGMII,
|
|
* but it still may need ZMII for MDIO so
|
|
* we don't fail here.
|
|
*/
|
|
return 0;
|
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
/* Autodetect ZMII mode if not specified.
|
|
* This is only for backward compatibility with the old driver.
|
|
* Please, always specify PHY mode in your board port to avoid
|
|
* any surprises.
|
|
*/
|
|
if (dev->mode == PHY_MODE_NA) {
|
|
if (*mode == PHY_MODE_NA) {
|
|
u32 r = dev->fer_save;
|
|
|
|
ZMII_DBG(dev, "autodetecting mode, FER = 0x%08x" NL, r);
|
|
|
|
if (r & (ZMII_FER_MII(0) | ZMII_FER_MII(1)))
|
|
dev->mode = PHY_MODE_MII;
|
|
else if (r & (ZMII_FER_RMII(0) | ZMII_FER_RMII(1)))
|
|
dev->mode = PHY_MODE_RMII;
|
|
else
|
|
dev->mode = PHY_MODE_SMII;
|
|
} else
|
|
dev->mode = *mode;
|
|
|
|
printk(KERN_NOTICE "%s: bridge in %s mode\n",
|
|
ofdev->node->full_name, zmii_mode_name(dev->mode));
|
|
} else {
|
|
/* All inputs must use the same mode */
|
|
if (*mode != PHY_MODE_NA && *mode != dev->mode) {
|
|
printk(KERN_ERR
|
|
"%s: invalid mode %d specified for input %d\n",
|
|
ofdev->node->full_name, *mode, input);
|
|
mutex_unlock(&dev->lock);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* Report back correct PHY mode,
|
|
* it may be used during PHY initialization.
|
|
*/
|
|
*mode = dev->mode;
|
|
|
|
/* Enable this input */
|
|
out_be32(&p->fer, in_be32(&p->fer) | zmii_mode_mask(dev->mode, input));
|
|
++dev->users;
|
|
|
|
mutex_unlock(&dev->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void zmii_get_mdio(struct of_device *ofdev, int input)
|
|
{
|
|
struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
u32 fer;
|
|
|
|
ZMII_DBG2(dev, "get_mdio(%d)" NL, input);
|
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
fer = in_be32(&dev->base->fer) & ~ZMII_FER_MDI_ALL;
|
|
out_be32(&dev->base->fer, fer | ZMII_FER_MDI(input));
|
|
}
|
|
|
|
void zmii_put_mdio(struct of_device *ofdev, int input)
|
|
{
|
|
struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
|
|
ZMII_DBG2(dev, "put_mdio(%d)" NL, input);
|
|
mutex_unlock(&dev->lock);
|
|
}
|
|
|
|
|
|
void zmii_set_speed(struct of_device *ofdev, int input, int speed)
|
|
{
|
|
struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
u32 ssr;
|
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
ssr = in_be32(&dev->base->ssr);
|
|
|
|
ZMII_DBG(dev, "speed(%d, %d)" NL, input, speed);
|
|
|
|
if (speed == SPEED_100)
|
|
ssr |= ZMII_SSR_SP(input);
|
|
else
|
|
ssr &= ~ZMII_SSR_SP(input);
|
|
|
|
out_be32(&dev->base->ssr, ssr);
|
|
|
|
mutex_unlock(&dev->lock);
|
|
}
|
|
|
|
void __devexit zmii_detach(struct of_device *ofdev, int input)
|
|
{
|
|
struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
|
|
BUG_ON(!dev || dev->users == 0);
|
|
|
|
mutex_lock(&dev->lock);
|
|
|
|
ZMII_DBG(dev, "detach(%d)" NL, input);
|
|
|
|
/* Disable this input */
|
|
out_be32(&dev->base->fer,
|
|
in_be32(&dev->base->fer) & ~zmii_mode_mask(dev->mode, input));
|
|
|
|
--dev->users;
|
|
|
|
mutex_unlock(&dev->lock);
|
|
}
|
|
|
|
int zmii_get_regs_len(struct of_device *ofdev)
|
|
{
|
|
return sizeof(struct emac_ethtool_regs_subhdr) +
|
|
sizeof(struct zmii_regs);
|
|
}
|
|
|
|
void *zmii_dump_regs(struct of_device *ofdev, void *buf)
|
|
{
|
|
struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
struct emac_ethtool_regs_subhdr *hdr = buf;
|
|
struct zmii_regs *regs = (struct zmii_regs *)(hdr + 1);
|
|
|
|
hdr->version = 0;
|
|
hdr->index = 0; /* for now, are there chips with more than one
|
|
* zmii ? if yes, then we'll add a cell_index
|
|
* like we do for emac
|
|
*/
|
|
memcpy_fromio(regs, dev->base, sizeof(struct zmii_regs));
|
|
return regs + 1;
|
|
}
|
|
|
|
static int __devinit zmii_probe(struct of_device *ofdev,
|
|
const struct of_device_id *match)
|
|
{
|
|
struct device_node *np = ofdev->node;
|
|
struct zmii_instance *dev;
|
|
struct resource regs;
|
|
int rc;
|
|
|
|
rc = -ENOMEM;
|
|
dev = kzalloc(sizeof(struct zmii_instance), GFP_KERNEL);
|
|
if (dev == NULL) {
|
|
printk(KERN_ERR "%s: could not allocate ZMII device!\n",
|
|
np->full_name);
|
|
goto err_gone;
|
|
}
|
|
|
|
mutex_init(&dev->lock);
|
|
dev->ofdev = ofdev;
|
|
dev->mode = PHY_MODE_NA;
|
|
|
|
rc = -ENXIO;
|
|
if (of_address_to_resource(np, 0, ®s)) {
|
|
printk(KERN_ERR "%s: Can't get registers address\n",
|
|
np->full_name);
|
|
goto err_free;
|
|
}
|
|
|
|
rc = -ENOMEM;
|
|
dev->base = (struct zmii_regs *)ioremap(regs.start,
|
|
sizeof(struct zmii_regs));
|
|
if (dev->base == NULL) {
|
|
printk(KERN_ERR "%s: Can't map device registers!\n",
|
|
np->full_name);
|
|
goto err_free;
|
|
}
|
|
|
|
/* We may need FER value for autodetection later */
|
|
dev->fer_save = in_be32(&dev->base->fer);
|
|
|
|
/* Disable all inputs by default */
|
|
out_be32(&dev->base->fer, 0);
|
|
|
|
printk(KERN_INFO
|
|
"ZMII %s initialized\n", ofdev->node->full_name);
|
|
wmb();
|
|
dev_set_drvdata(&ofdev->dev, dev);
|
|
|
|
return 0;
|
|
|
|
err_free:
|
|
kfree(dev);
|
|
err_gone:
|
|
return rc;
|
|
}
|
|
|
|
static int __devexit zmii_remove(struct of_device *ofdev)
|
|
{
|
|
struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev);
|
|
|
|
dev_set_drvdata(&ofdev->dev, NULL);
|
|
|
|
WARN_ON(dev->users != 0);
|
|
|
|
iounmap(dev->base);
|
|
kfree(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct of_device_id zmii_match[] =
|
|
{
|
|
{
|
|
.compatible = "ibm,zmii",
|
|
},
|
|
/* For backward compat with old DT */
|
|
{
|
|
.type = "emac-zmii",
|
|
},
|
|
{},
|
|
};
|
|
|
|
static struct of_platform_driver zmii_driver = {
|
|
.name = "emac-zmii",
|
|
.match_table = zmii_match,
|
|
|
|
.probe = zmii_probe,
|
|
.remove = zmii_remove,
|
|
};
|
|
|
|
int __init zmii_init(void)
|
|
{
|
|
return of_register_platform_driver(&zmii_driver);
|
|
}
|
|
|
|
void zmii_exit(void)
|
|
{
|
|
of_unregister_platform_driver(&zmii_driver);
|
|
}
|