![Alex Villacís Lasso](/assets/img/avatar_default.png)
This dongle does not follow the usb-irda specification, so it needs its own special driver. First, it uses control URBs for data transfer, instead of bulk or interrupt transfers; the only interrupt endpoint exposed seems to be a dummy to prevent the interface from being rejected. Second, it uses obfuscation and padding at the USB traffic level, for no apparent reason other than to make reverse engineering harder (full details on obfuscation in comments at beginning of source). Although it is advertised as a "4 Mbps FIR dongle", it apparently loses packets at speeds greater than 57600 bps. On plugin, this dongle reports vendor and device IDs: 0x07d0:0x4959 . The Windows driver that is used normally to control this dongle has a filename of KS-959.SYS . Signed-off-by: Alex Villacís Lasso <a_villacis@palosanto.com> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
487 lines
18 KiB
Plaintext
487 lines
18 KiB
Plaintext
menu "Infrared-port device drivers"
|
|
depends on IRDA!=n
|
|
|
|
comment "SIR device drivers"
|
|
|
|
config IRTTY_SIR
|
|
tristate "IrTTY (uses Linux serial driver)"
|
|
depends on IRDA
|
|
help
|
|
Say Y here if you want to build support for the IrTTY line
|
|
discipline. To compile it as a module, choose M here: the module
|
|
will be called irtty-sir. IrTTY makes it possible to use Linux's
|
|
own serial driver for all IrDA ports that are 16550 compatible.
|
|
Most IrDA chips are 16550 compatible so you should probably say Y
|
|
to this option. Using IrTTY will however limit the speed of the
|
|
connection to 115200 bps (IrDA SIR mode).
|
|
|
|
If unsure, say Y.
|
|
|
|
comment "Dongle support"
|
|
|
|
config DONGLE
|
|
bool "Serial dongle support"
|
|
depends on IRTTY_SIR
|
|
help
|
|
Say Y here if you have an infrared device that connects to your
|
|
computer's serial port. These devices are called dongles. Then say Y
|
|
or M to the driver for your particular dongle below.
|
|
|
|
Note that the answer to this question won't directly affect the
|
|
kernel: saying N will just cause the configurator to skip all
|
|
the questions about serial dongles.
|
|
|
|
config ESI_DONGLE
|
|
tristate "ESI JetEye PC dongle"
|
|
depends on IRTTY_SIR && DONGLE && IRDA
|
|
help
|
|
Say Y here if you want to build support for the Extended Systems
|
|
JetEye PC dongle. To compile it as a module, choose M here. The ESI
|
|
dongle attaches to the normal 9-pin serial port connector, and can
|
|
currently only be used by IrTTY. To activate support for ESI
|
|
dongles you will have to start irattach like this:
|
|
"irattach -d esi".
|
|
|
|
config ACTISYS_DONGLE
|
|
tristate "ACTiSYS IR-220L and IR220L+ dongle"
|
|
depends on IRTTY_SIR && DONGLE && IRDA
|
|
help
|
|
Say Y here if you want to build support for the ACTiSYS IR-220L and
|
|
IR220L+ dongles. To compile it as a module, choose M here. The
|
|
ACTiSYS dongles attaches to the normal 9-pin serial port connector,
|
|
and can currently only be used by IrTTY. To activate support for
|
|
ACTiSYS dongles you will have to start irattach like this:
|
|
"irattach -d actisys" or "irattach -d actisys+".
|
|
|
|
config TEKRAM_DONGLE
|
|
tristate "Tekram IrMate 210B dongle"
|
|
depends on IRTTY_SIR && DONGLE && IRDA
|
|
help
|
|
Say Y here if you want to build support for the Tekram IrMate 210B
|
|
dongle. To compile it as a module, choose M here. The Tekram dongle
|
|
attaches to the normal 9-pin serial port connector, and can
|
|
currently only be used by IrTTY. To activate support for Tekram
|
|
dongles you will have to start irattach like this:
|
|
"irattach -d tekram".
|
|
|
|
config TOIM3232_DONGLE
|
|
tristate "TOIM3232 IrDa dongle"
|
|
depends on IRTTY_SIR && DONGLE && IRDA
|
|
help
|
|
Say Y here if you want to build support for the Vishay/Temic
|
|
TOIM3232 and TOIM4232 based dongles.
|
|
To compile it as a module, choose M here.
|
|
|
|
config LITELINK_DONGLE
|
|
tristate "Parallax LiteLink dongle"
|
|
depends on IRTTY_SIR && DONGLE && IRDA
|
|
help
|
|
Say Y here if you want to build support for the Parallax Litelink
|
|
dongle. To compile it as a module, choose M here. The Parallax
|
|
dongle attaches to the normal 9-pin serial port connector, and can
|
|
currently only be used by IrTTY. To activate support for Parallax
|
|
dongles you will have to start irattach like this:
|
|
"irattach -d litelink".
|
|
|
|
config MA600_DONGLE
|
|
tristate "Mobile Action MA600 dongle"
|
|
depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
|
|
help
|
|
Say Y here if you want to build support for the Mobile Action MA600
|
|
dongle. To compile it as a module, choose M here. The MA600 dongle
|
|
attaches to the normal 9-pin serial port connector, and can
|
|
currently only be used by IrTTY. The driver should also support
|
|
the MA620 USB version of the dongle, if the integrated USB-to-RS232
|
|
converter is supported by usbserial. To activate support for
|
|
MA600 dongle you will have to start irattach like this:
|
|
"irattach -d ma600".
|
|
|
|
config GIRBIL_DONGLE
|
|
tristate "Greenwich GIrBIL dongle"
|
|
depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
|
|
help
|
|
Say Y here if you want to build support for the Greenwich GIrBIL
|
|
dongle. If you want to compile it as a module, choose M here.
|
|
The Greenwich dongle attaches to the normal 9-pin serial port
|
|
connector, and can currently only be used by IrTTY. To activate
|
|
support for Greenwich dongles you will have to start irattach
|
|
like this: "irattach -d girbil".
|
|
|
|
config MCP2120_DONGLE
|
|
tristate "Microchip MCP2120"
|
|
depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
|
|
help
|
|
Say Y here if you want to build support for the Microchip MCP2120
|
|
dongle. If you want to compile it as a module, choose M here.
|
|
The MCP2120 dongle attaches to the normal 9-pin serial port
|
|
connector, and can currently only be used by IrTTY. To activate
|
|
support for MCP2120 dongles you will have to start irattach
|
|
like this: "irattach -d mcp2120".
|
|
|
|
You must build this dongle yourself. For more information see:
|
|
<http://www.eyetap.org/~tangf/irda_sir_linux.html>
|
|
|
|
config OLD_BELKIN_DONGLE
|
|
tristate "Old Belkin dongle"
|
|
depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
|
|
help
|
|
Say Y here if you want to build support for the Adaptec Airport 1000
|
|
and 2000 dongles. If you want to compile it as a module, choose
|
|
M here. Some information is contained in the comments
|
|
at the top of <file:drivers/net/irda/old_belkin.c>.
|
|
|
|
config ACT200L_DONGLE
|
|
tristate "ACTiSYS IR-200L dongle"
|
|
depends on IRTTY_SIR && DONGLE && IRDA && EXPERIMENTAL
|
|
help
|
|
Say Y here if you want to build support for the ACTiSYS IR-200L
|
|
dongle. If you want to compile it as a module, choose M here.
|
|
The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
|
|
port connector, and can currently only be used by IrTTY.
|
|
To activate support for ACTiSYS IR-200L dongle you will have to
|
|
start irattach like this: "irattach -d act200l".
|
|
|
|
config KINGSUN_DONGLE
|
|
tristate "KingSun/DonShine DS-620 IrDA-USB dongle"
|
|
depends on IRDA && USB && EXPERIMENTAL
|
|
help
|
|
Say Y or M here if you want to build support for the KingSun/DonShine
|
|
DS-620 IrDA-USB bridge device driver.
|
|
|
|
This USB bridge does not conform to the IrDA-USB device class
|
|
specification, and therefore needs its own specific driver. This
|
|
dongle supports SIR speed only (9600 bps).
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
kingsun-sir.
|
|
|
|
config EP7211_DONGLE
|
|
tristate "EP7211 I/R support"
|
|
depends on IRTTY_SIR && ARCH_EP7211 && IRDA && EXPERIMENTAL
|
|
help
|
|
Say Y here if you want to build support for the Cirrus logic
|
|
EP7211 chipset's infrared module.
|
|
|
|
config KSDAZZLE_DONGLE
|
|
tristate "KingSun Dazzle IrDA-USB dongle (EXPERIMENTAL)"
|
|
depends on IRDA && USB && EXPERIMENTAL
|
|
help
|
|
Say Y or M here if you want to build support for the KingSun Dazzle
|
|
IrDA-USB bridge device driver.
|
|
|
|
This USB bridge does not conform to the IrDA-USB device class
|
|
specification, and therefore needs its own specific driver. This
|
|
dongle supports SIR speeds only (9600 through 115200 bps).
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
ksdazzle-sir.
|
|
|
|
config KS959_DONGLE
|
|
tristate "KingSun KS-959 IrDA-USB dongle (EXPERIMENTAL)"
|
|
depends on IRDA && USB && EXPERIMENTAL
|
|
help
|
|
Say Y or M here if you want to build support for the KingSun KS-959
|
|
IrDA-USB bridge device driver.
|
|
|
|
This USB bridge does not conform to the IrDA-USB device class
|
|
specification, and therefore needs its own specific driver. This
|
|
dongle supports SIR speeds only (9600 through 57600 bps).
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
ks959-sir.
|
|
|
|
comment "Old SIR device drivers"
|
|
|
|
config IRPORT_SIR
|
|
tristate "IrPORT (IrDA serial driver)"
|
|
depends on IRDA && BROKEN_ON_SMP
|
|
---help---
|
|
Say Y here if you want to build support for the IrPORT IrDA device
|
|
driver. To compile it as a module, choose M here: the module will be
|
|
called irport. IrPORT can be used instead of IrTTY and sometimes
|
|
this can be better. One example is if your IrDA port does not
|
|
have echo-canceling, which will work OK with IrPORT since this
|
|
driver is working in half-duplex mode only. You don't need to use
|
|
irattach with IrPORT, but you just insert it the same way as FIR
|
|
drivers (insmod irport io=0x3e8 irq=11). Notice that IrPORT is a
|
|
SIR device driver which means that speed is limited to 115200 bps.
|
|
|
|
If unsure, say Y.
|
|
|
|
comment "Old Serial dongle support"
|
|
|
|
config DONGLE_OLD
|
|
bool "Old Serial dongle support"
|
|
depends on IRPORT_SIR && BROKEN_ON_SMP
|
|
help
|
|
Say Y here if you have an infrared device that connects to your
|
|
computer's serial port. These devices are called dongles. Then say Y
|
|
or M to the driver for your particular dongle below.
|
|
|
|
Note that the answer to this question won't directly affect the
|
|
kernel: saying N will just cause the configurator to skip all
|
|
the questions about serial dongles.
|
|
|
|
config ESI_DONGLE_OLD
|
|
tristate "ESI JetEye PC dongle"
|
|
depends on DONGLE_OLD && IRDA
|
|
help
|
|
Say Y here if you want to build support for the Extended Systems
|
|
JetEye PC dongle. To compile it as a module, choose M here. The ESI
|
|
dongle attaches to the normal 9-pin serial port connector, and can
|
|
currently only be used by IrTTY. To activate support for ESI
|
|
dongles you will have to start irattach like this:
|
|
"irattach -d esi".
|
|
|
|
config ACTISYS_DONGLE_OLD
|
|
tristate "ACTiSYS IR-220L and IR220L+ dongle"
|
|
depends on DONGLE_OLD && IRDA
|
|
help
|
|
Say Y here if you want to build support for the ACTiSYS IR-220L and
|
|
IR220L+ dongles. To compile it as a module, choose M here. The
|
|
ACTiSYS dongles attaches to the normal 9-pin serial port connector,
|
|
and can currently only be used by IrTTY. To activate support for
|
|
ACTiSYS dongles you will have to start irattach like this:
|
|
"irattach -d actisys" or "irattach -d actisys+".
|
|
|
|
config TEKRAM_DONGLE_OLD
|
|
tristate "Tekram IrMate 210B dongle"
|
|
depends on DONGLE_OLD && IRDA
|
|
help
|
|
Say Y here if you want to build support for the Tekram IrMate 210B
|
|
dongle. To compile it as a module, choose M here. The Tekram dongle
|
|
attaches to the normal 9-pin serial port connector, and can
|
|
currently only be used by IrTTY. To activate support for Tekram
|
|
dongles you will have to start irattach like this:
|
|
"irattach -d tekram".
|
|
|
|
config GIRBIL_DONGLE_OLD
|
|
tristate "Greenwich GIrBIL dongle"
|
|
depends on DONGLE_OLD && IRDA
|
|
help
|
|
Say Y here if you want to build support for the Greenwich GIrBIL
|
|
dongle. To compile it as a module, choose M here. The Greenwich
|
|
dongle attaches to the normal 9-pin serial port connector, and can
|
|
currently only be used by IrTTY. To activate support for Greenwich
|
|
dongles you will have to insert "irattach -d girbil" in the
|
|
/etc/irda/drivers script.
|
|
|
|
config LITELINK_DONGLE_OLD
|
|
tristate "Parallax LiteLink dongle"
|
|
depends on DONGLE_OLD && IRDA
|
|
help
|
|
Say Y here if you want to build support for the Parallax Litelink
|
|
dongle. To compile it as a module, choose M here. The Parallax
|
|
dongle attaches to the normal 9-pin serial port connector, and can
|
|
currently only be used by IrTTY. To activate support for Parallax
|
|
dongles you will have to start irattach like this:
|
|
"irattach -d litelink".
|
|
|
|
config MCP2120_DONGLE_OLD
|
|
tristate "Microchip MCP2120"
|
|
depends on DONGLE_OLD && IRDA
|
|
help
|
|
Say Y here if you want to build support for the Microchip MCP2120
|
|
dongle. To compile it as a module, choose M here. The MCP2120 dongle
|
|
attaches to the normal 9-pin serial port connector, and can
|
|
currently only be used by IrTTY. To activate support for MCP2120
|
|
dongles you will have to insert "irattach -d mcp2120" in the
|
|
/etc/irda/drivers script.
|
|
|
|
You must build this dongle yourself. For more information see:
|
|
<http://www.eyetap.org/~tangf/irda_sir_linux.html>
|
|
|
|
config OLD_BELKIN_DONGLE_OLD
|
|
tristate "Old Belkin dongle"
|
|
depends on DONGLE_OLD && IRDA
|
|
help
|
|
Say Y here if you want to build support for the Adaptec Airport 1000
|
|
and 2000 dongles. To compile it as a module, choose M here: the module
|
|
will be called old_belkin. Some information is contained in the
|
|
comments at the top of <file:drivers/net/irda/old_belkin.c>.
|
|
|
|
config ACT200L_DONGLE_OLD
|
|
tristate "ACTiSYS IR-200L dongle (EXPERIMENTAL)"
|
|
depends on DONGLE_OLD && EXPERIMENTAL && IRDA
|
|
help
|
|
Say Y here if you want to build support for the ACTiSYS IR-200L
|
|
dongle. To compile it as a module, choose M here. The ACTiSYS
|
|
IR-200L dongle attaches to the normal 9-pin serial port connector,
|
|
and can currently only be used by IrTTY. To activate support for
|
|
ACTiSYS IR-200L dongles you will have to start irattach like this:
|
|
"irattach -d act200l".
|
|
|
|
config MA600_DONGLE_OLD
|
|
tristate "Mobile Action MA600 dongle (EXPERIMENTAL)"
|
|
depends on DONGLE_OLD && EXPERIMENTAL && IRDA
|
|
---help---
|
|
Say Y here if you want to build support for the Mobile Action MA600
|
|
dongle. To compile it as a module, choose M here. The MA600 dongle
|
|
attaches to the normal 9-pin serial port connector, and can
|
|
currently only be tested on IrCOMM. To activate support for MA600
|
|
dongles you will have to insert "irattach -d ma600" in the
|
|
/etc/irda/drivers script. Note: irutils 0.9.15 requires no
|
|
modification. irutils 0.9.9 needs modification. For more
|
|
information, download the following tar gzip file.
|
|
|
|
There is a pre-compiled module on
|
|
<http://engsvr.ust.hk/~eetwl95/ma600.html>
|
|
|
|
config EP7211_IR
|
|
tristate "EP7211 I/R support"
|
|
depends on DONGLE_OLD && ARCH_EP7211 && IRDA
|
|
|
|
comment "FIR device drivers"
|
|
|
|
config USB_IRDA
|
|
tristate "IrDA USB dongles"
|
|
depends on IRDA && USB
|
|
select FW_LOADER
|
|
---help---
|
|
Say Y here if you want to build support for the USB IrDA FIR Dongle
|
|
device driver. To compile it as a module, choose M here: the module
|
|
will be called irda-usb. IrDA-USB support the various IrDA USB
|
|
dongles available and most of their peculiarities. Those dongles
|
|
plug in the USB port of your computer, are plug and play, and
|
|
support SIR and FIR (4Mbps) speeds. On the other hand, those
|
|
dongles tend to be less efficient than a FIR chipset.
|
|
|
|
Please note that the driver is still experimental. And of course,
|
|
you will need both USB and IrDA support in your kernel...
|
|
|
|
config SIGMATEL_FIR
|
|
tristate "SigmaTel STIr4200 bridge (EXPERIMENTAL)"
|
|
depends on IRDA && USB && EXPERIMENTAL
|
|
select CRC32
|
|
---help---
|
|
Say Y here if you want to build support for the SigmaTel STIr4200
|
|
USB IrDA FIR bridge device driver.
|
|
|
|
USB bridge based on the SigmaTel STIr4200 don't conform to the
|
|
IrDA-USB device class specification, and therefore need their
|
|
own specific driver. Those dongles support SIR and FIR (4Mbps)
|
|
speeds.
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
stir4200.
|
|
|
|
config NSC_FIR
|
|
tristate "NSC PC87108/PC87338"
|
|
depends on IRDA && ISA_DMA_API
|
|
help
|
|
Say Y here if you want to build support for the NSC PC87108 and
|
|
PC87338 IrDA chipsets. This driver supports SIR,
|
|
MIR and FIR (4Mbps) speeds.
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
nsc-ircc.
|
|
|
|
config WINBOND_FIR
|
|
tristate "Winbond W83977AF (IR)"
|
|
depends on IRDA && ISA_DMA_API
|
|
help
|
|
Say Y here if you want to build IrDA support for the Winbond
|
|
W83977AF super-io chipset. This driver should be used for the IrDA
|
|
chipset in the Corel NetWinder. The driver supports SIR, MIR and
|
|
FIR (4Mbps) speeds.
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
w83977af_ir.
|
|
|
|
config TOSHIBA_FIR
|
|
tristate "Toshiba Type-O IR Port"
|
|
depends on IRDA && PCI && !64BIT && VIRT_TO_BUS
|
|
help
|
|
Say Y here if you want to build support for the Toshiba Type-O IR
|
|
and Donau oboe chipsets. These chipsets are used by the Toshiba
|
|
Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
|
|
To compile it as a module, choose M here: the module will be called
|
|
donauboe.
|
|
|
|
config AU1000_FIR
|
|
tristate "Alchemy Au1000 SIR/FIR"
|
|
depends on SOC_AU1000 && IRDA
|
|
|
|
config SMC_IRCC_FIR
|
|
tristate "SMSC IrCC (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && IRDA && ISA_DMA_API
|
|
help
|
|
Say Y here if you want to build support for the SMC Infrared
|
|
Communications Controller. It is used in a wide variety of
|
|
laptops (Fujitsu, Sony, Compaq and some Toshiba).
|
|
To compile it as a module, choose M here: the module will be called
|
|
smsc-ircc2.o.
|
|
|
|
config ALI_FIR
|
|
tristate "ALi M5123 FIR (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && IRDA && ISA_DMA_API
|
|
help
|
|
Say Y here if you want to build support for the ALi M5123 FIR
|
|
Controller. The ALi M5123 FIR Controller is embedded in ALi M1543C,
|
|
M1535, M1535D, M1535+, M1535D South Bridge. This driver supports
|
|
SIR, MIR and FIR (4Mbps) speeds.
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
ali-ircc.
|
|
|
|
config VLSI_FIR
|
|
tristate "VLSI 82C147 SIR/MIR/FIR (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && IRDA && PCI
|
|
help
|
|
Say Y here if you want to build support for the VLSI 82C147
|
|
PCI-IrDA Controller. This controller is used by the HP OmniBook 800
|
|
and 5500 notebooks. The driver provides support for SIR, MIR and
|
|
FIR (4Mbps) speeds.
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
vlsi_ir.
|
|
|
|
config SA1100_FIR
|
|
tristate "SA1100 Internal IR"
|
|
depends on ARCH_SA1100 && IRDA
|
|
|
|
config VIA_FIR
|
|
tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
|
|
depends on IRDA && ISA_DMA_API
|
|
help
|
|
Say Y here if you want to build support for the VIA VT8231
|
|
and VIA VT1211 IrDA controllers, found on the motherboards using
|
|
those VIA chipsets. To use this controller, you will need
|
|
to plug a specific 5 pins FIR IrDA dongle in the specific
|
|
motherboard connector. The driver provides support for SIR, MIR
|
|
and FIR (4Mbps) speeds.
|
|
|
|
You will need to specify the 'dongle_id' module parameter to
|
|
indicate the FIR dongle attached to the controller.
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
via-ircc.
|
|
|
|
config PXA_FICP
|
|
tristate "Intel PXA2xx Internal FICP"
|
|
depends on ARCH_PXA && IRDA
|
|
help
|
|
Say Y or M here if you want to build support for the PXA2xx
|
|
built-in IRDA interface which can support both SIR and FIR.
|
|
This driver relies on platform specific helper routines so
|
|
available capabilities may vary from one PXA2xx target to
|
|
another.
|
|
|
|
config MCS_FIR
|
|
tristate "MosChip MCS7780 IrDA-USB dongle"
|
|
depends on IRDA && USB && EXPERIMENTAL
|
|
help
|
|
Say Y or M here if you want to build support for the MosChip
|
|
MCS7780 IrDA-USB bridge device driver.
|
|
|
|
USB bridge based on the MosChip MCS7780 don't conform to the
|
|
IrDA-USB device class specification, and therefore need their
|
|
own specific driver. Those dongles support SIR and FIR (4Mbps)
|
|
speeds.
|
|
|
|
To compile it as a module, choose M here: the module will be called
|
|
mcs7780.
|
|
|
|
endmenu
|
|
|