1d328606c6
The "powered-down" cpuidle mode of Tegra20 needs the CPU0 be the last one core to go into this mode before other core. The coupled cpuidle framework can help to sync the MPCore to coupled state then go into "powered-down" idle mode together. The driver can just assume the MPCore come into "powered-down" mode at the same time. No need to take care if the CPU_0 goes into this mode along and only can put it into safe idle mode (WFI). The powered-down state of Tegra20 requires power gating both CPU cores. When the secondary CPU requests to enter powered-down state, it saves its own contexts and then enters WFI for waiting CPU0 in the same state. When the CPU0 requests powered-down state, it attempts to put the secondary CPU into reset to prevent it from waking up. Then power down both CPUs together and power off the cpu rail. Be aware of that, you may see the legacy power state "LP2" in the code which is exactly the same meaning of "CPU power down". Based on the work by: Colin Cross <ccross@android.com> Gary King <gking@nvidia.com> Signed-off-by: Joseph Lo <josephl@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
150 lines
4.2 KiB
C
150 lines
4.2 KiB
C
/*
|
|
* Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef __MACH_TEGRA_SLEEP_H
|
|
#define __MACH_TEGRA_SLEEP_H
|
|
|
|
#include "iomap.h"
|
|
|
|
#define TEGRA_ARM_PERIF_VIRT (TEGRA_ARM_PERIF_BASE - IO_CPU_PHYS \
|
|
+ IO_CPU_VIRT)
|
|
#define TEGRA_FLOW_CTRL_VIRT (TEGRA_FLOW_CTRL_BASE - IO_PPSB_PHYS \
|
|
+ IO_PPSB_VIRT)
|
|
#define TEGRA_CLK_RESET_VIRT (TEGRA_CLK_RESET_BASE - IO_PPSB_PHYS \
|
|
+ IO_PPSB_VIRT)
|
|
#define TEGRA_PMC_VIRT (TEGRA_PMC_BASE - IO_APB_PHYS + IO_APB_VIRT)
|
|
|
|
/* PMC_SCRATCH37-39 and 41 are used for tegra_pen_lock and idle */
|
|
#define PMC_SCRATCH37 0x130
|
|
#define PMC_SCRATCH38 0x134
|
|
#define PMC_SCRATCH39 0x138
|
|
#define PMC_SCRATCH41 0x140
|
|
|
|
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
|
|
#define CPU_RESETTABLE 2
|
|
#define CPU_RESETTABLE_SOON 1
|
|
#define CPU_NOT_RESETTABLE 0
|
|
#endif
|
|
|
|
#ifdef __ASSEMBLY__
|
|
/* returns the offset of the flow controller halt register for a cpu */
|
|
.macro cpu_to_halt_reg rd, rcpu
|
|
cmp \rcpu, #0
|
|
subne \rd, \rcpu, #1
|
|
movne \rd, \rd, lsl #3
|
|
addne \rd, \rd, #0x14
|
|
moveq \rd, #0
|
|
.endm
|
|
|
|
/* returns the offset of the flow controller csr register for a cpu */
|
|
.macro cpu_to_csr_reg rd, rcpu
|
|
cmp \rcpu, #0
|
|
subne \rd, \rcpu, #1
|
|
movne \rd, \rd, lsl #3
|
|
addne \rd, \rd, #0x18
|
|
moveq \rd, #8
|
|
.endm
|
|
|
|
/* returns the ID of the current processor */
|
|
.macro cpu_id, rd
|
|
mrc p15, 0, \rd, c0, c0, 5
|
|
and \rd, \rd, #0xF
|
|
.endm
|
|
|
|
/* loads a 32-bit value into a register without a data access */
|
|
.macro mov32, reg, val
|
|
movw \reg, #:lower16:\val
|
|
movt \reg, #:upper16:\val
|
|
.endm
|
|
|
|
/* Macro to exit SMP coherency. */
|
|
.macro exit_smp, tmp1, tmp2
|
|
mrc p15, 0, \tmp1, c1, c0, 1 @ ACTLR
|
|
bic \tmp1, \tmp1, #(1<<6) | (1<<0) @ clear ACTLR.SMP | ACTLR.FW
|
|
mcr p15, 0, \tmp1, c1, c0, 1 @ ACTLR
|
|
isb
|
|
cpu_id \tmp1
|
|
mov \tmp1, \tmp1, lsl #2
|
|
mov \tmp2, #0xf
|
|
mov \tmp2, \tmp2, lsl \tmp1
|
|
mov32 \tmp1, TEGRA_ARM_PERIF_VIRT + 0xC
|
|
str \tmp2, [\tmp1] @ invalidate SCU tags for CPU
|
|
dsb
|
|
.endm
|
|
|
|
/* Macro to resume & re-enable L2 cache */
|
|
#ifndef L2X0_CTRL_EN
|
|
#define L2X0_CTRL_EN 1
|
|
#endif
|
|
|
|
#ifdef CONFIG_CACHE_L2X0
|
|
.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs
|
|
adr \tmp1, \phys_l2x0_saved_regs
|
|
ldr \tmp1, [\tmp1]
|
|
ldr \tmp2, [\tmp1, #L2X0_R_PHY_BASE]
|
|
ldr \tmp3, [\tmp2, #L2X0_CTRL]
|
|
tst \tmp3, #L2X0_CTRL_EN
|
|
bne exit_l2_resume
|
|
ldr \tmp3, [\tmp1, #L2X0_R_TAG_LATENCY]
|
|
str \tmp3, [\tmp2, #L2X0_TAG_LATENCY_CTRL]
|
|
ldr \tmp3, [\tmp1, #L2X0_R_DATA_LATENCY]
|
|
str \tmp3, [\tmp2, #L2X0_DATA_LATENCY_CTRL]
|
|
ldr \tmp3, [\tmp1, #L2X0_R_PREFETCH_CTRL]
|
|
str \tmp3, [\tmp2, #L2X0_PREFETCH_CTRL]
|
|
ldr \tmp3, [\tmp1, #L2X0_R_PWR_CTRL]
|
|
str \tmp3, [\tmp2, #L2X0_POWER_CTRL]
|
|
ldr \tmp3, [\tmp1, #L2X0_R_AUX_CTRL]
|
|
str \tmp3, [\tmp2, #L2X0_AUX_CTRL]
|
|
mov \tmp3, #L2X0_CTRL_EN
|
|
str \tmp3, [\tmp2, #L2X0_CTRL]
|
|
exit_l2_resume:
|
|
.endm
|
|
#else /* CONFIG_CACHE_L2X0 */
|
|
.macro l2_cache_resume, tmp1, tmp2, tmp3, phys_l2x0_saved_regs
|
|
.endm
|
|
#endif /* CONFIG_CACHE_L2X0 */
|
|
#else
|
|
void tegra_pen_lock(void);
|
|
void tegra_pen_unlock(void);
|
|
void tegra_resume(void);
|
|
int tegra_sleep_cpu_finish(unsigned long);
|
|
void tegra_disable_clean_inv_dcache(void);
|
|
|
|
#ifdef CONFIG_HOTPLUG_CPU
|
|
void tegra20_hotplug_init(void);
|
|
void tegra30_hotplug_init(void);
|
|
#else
|
|
static inline void tegra20_hotplug_init(void) {}
|
|
static inline void tegra30_hotplug_init(void) {}
|
|
#endif
|
|
|
|
void tegra20_cpu_shutdown(int cpu);
|
|
int tegra20_cpu_is_resettable_soon(void);
|
|
void tegra20_cpu_clear_resettable(void);
|
|
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
|
|
void tegra20_cpu_set_resettable_soon(void);
|
|
#else
|
|
static inline void tegra20_cpu_set_resettable_soon(void) {}
|
|
#endif
|
|
|
|
int tegra20_sleep_cpu_secondary_finish(unsigned long);
|
|
void tegra20_tear_down_cpu(void);
|
|
int tegra30_sleep_cpu_secondary_finish(unsigned long);
|
|
void tegra30_tear_down_cpu(void);
|
|
|
|
#endif
|
|
#endif
|