6da314122d
The DT branch adds a lot of new stuff for additional SoC and board support. The branch is the largest one and contains 513 out of the total 972 non-merge arm-soc changesets for 3.19. Most of the changes are about enabling additional on-chip devices for existing machines, but there are also an unusual number of new SoC types being added this time: * AMLogic Meson8 * ARM Realview in DT mode * Allwinner A80 * Broadcom BCM47081 * Broadcom Cygnus * Freescale LS1021A * Freescale Vybrid 500 series * Mediatek MT6592, MT8127, MT8135 * STMicroelectronics STiH410 * Samsung Exynos4415 The level of support for the above differs widely, some are just stubs with nothing more than CPU, memory and a UART, but others are fairly complete. As usual, these get extended over time. There are also many new boards getting added, this is the list of model strings that are showing up in new dts files: * ARM RealView PB1176 * Altera SOCFPGA Arria 10 * Asus RT-N18U (BCM47081) * Buffalo WZR-1750DHP (BCM4708) * Buffalo WZR-600DHP2 (BCM47081) * Cygnus Enterprise Phone (BCM911360_ENTPHN) * D-Link DIR-665 * Google Spring * IGEP COM MODULE Rev. G (TI OMAP AM/DM37x) * IGEPv2 Rev. F (TI OMAP AM/DM37x) * LS1021A QDS Board * LS1021A TWR Board * LeMaker Banana Pi * MarsBoard RK3066 * MediaTek MT8127 Moose Board * MediaTek MT8135 evaluation board * Mele M3 * Merrii A80 Optimus Board * Netgear R6300 V2 (BCM4708) * Nomadik STN8815NHK * NovaTech OrionLXm * Olimex A20-OLinuXino-LIME2 * Raspberry Pi Model B+ * STiH410 B2120 * Samsung Monk board * Samsung Rinato board * Synology DS213j * Synology DS414 * TBS2910 Matrix ARM mini PC * TI AM5728 BeagleBoard-X15 * Toradex Colibri VF50 on Colibri Evaluation Board * Zynq ZYBO Development Board Other notable changes include: * exynos: cleanup of existing dts files * mvebu: improved pinctrl support for Armada 370/XP * nomadik: restructuring dts files * omap: added CAN bus support * shmobile: added clock support for some SoCs * shmobile: added sound support for some SoCs * sirf: reset controller support * sunxi: continuing the relicensing under dual GPL/MIT * sunxi: lots of new on-chip device support * sunxi: working simplefb support (long awaited) * various: provide stdout-path property for earlycon -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iQIVAwUAVIcj3mCrR//JCVInAQL9Nw//YKK1l5gDZMmJ5nZXapXaZXERACN1n7H6 9kkEZRF5ndUY4+MQmqYqHqBya04aQgnuHu0hsxbEAn2L3j2+ejZgc8XRqflArORy EXQvH/l6UNA11aCoLvKvT9fny76ZCOyEOALWXj9oLxhfd5X2d/So9q1ELFLgmc0S XnVMfpoXPeVPhe6l8EhF/qI0xYjM91CHWRopRQi6yp4DqFXV2+h5ggCpX1+S2e8L LyGNLk0RM9Mha+Qyy4O+LY+FoeWwDutQyat0ct9ov6FP8AYrR1N43d/ekJ57L8fU hVymo+5prUwEkIfQpsJQjPzonJxFssk1KD9t+GZ99VgEO02tvpjeB0nwoaWJxS25 MzU2Bgp0Z/Yu0Q0SGu5/fuMya1Mo+wRA1OyQLp515TQqdWyTLcPT9o/ahfw8Uf1W 6gBZoB+XXEQPI1sMHDDrn4r5T9mySsodAGfnvJoNxttnjCmVRzI5sXssnFji8TTF ciMEzfoTJNPqzxkzaOM13XmslKtFrI9A+DGgnOWn6oZXODzHcc6M+z/moiWy8b/e /HsbzWvp9HUPZVjM2AJR4iiyLXv7GRu9maNmGtoXKi9bnQDaNGWFovp/R5y8avQM xyzJ+6melNZnnoEue8/OOdum7jMeqPCRVQuqM2hKVcsmNEnb7kPBOi4AYXWTrTFO bcDvFylnmlA= =BHwA -----END PGP SIGNATURE----- Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Arnd Bergmann: "The DT branch adds a lot of new stuff for additional SoC and board support. The branch is the largest one and contains 513 out of the total 972 non-merge arm-soc changesets for 3.19. Most of the changes are about enabling additional on-chip devices for existing machines, but there are also an unusual number of new SoC types being added this time: - AMLogic Meson8 - ARM Realview in DT mode - Allwinner A80 - Broadcom BCM47081 - Broadcom Cygnus - Freescale LS1021A - Freescale Vybrid 500 series - Mediatek MT6592, MT8127, MT8135 - STMicroelectronics STiH410 - Samsung Exynos4415 The level of support for the above differs widely, some are just stubs with nothing more than CPU, memory and a UART, but others are fairly complete. As usual, these get extended over time. There are also many new boards getting added, this is the list of model strings that are showing up in new dts files: - ARM RealView PB1176 - Altera SOCFPGA Arria 10 - Asus RT-N18U (BCM47081) - Buffalo WZR-1750DHP (BCM4708) - Buffalo WZR-600DHP2 (BCM47081) - Cygnus Enterprise Phone (BCM911360_ENTPHN) - D-Link DIR-665 - Google Spring - IGEP COM MODULE Rev. G (TI OMAP AM/DM37x) - IGEPv2 Rev. F (TI OMAP AM/DM37x) - LS1021A QDS Board - LS1021A TWR Board - LeMaker Banana Pi - MarsBoard RK3066 - MediaTek MT8127 Moose Board - MediaTek MT8135 evaluation board - Mele M3 - Merrii A80 Optimus Board - Netgear R6300 V2 (BCM4708) - Nomadik STN8815NHK - NovaTech OrionLXm - Olimex A20-OLinuXino-LIME2 - Raspberry Pi Model B+ - STiH410 B2120 - Samsung Monk board - Samsung Rinato board - Synology DS213j - Synology DS414 - TBS2910 Matrix ARM mini PC - TI AM5728 BeagleBoard-X15 - Toradex Colibri VF50 on Colibri Evaluation Board - Zynq ZYBO Development Board Other notable changes include: - exynos: cleanup of existing dts files - mvebu: improved pinctrl support for Armada 370/XP - nomadik: restructuring dts files - omap: added CAN bus support - shmobile: added clock support for some SoCs - shmobile: added sound support for some SoCs - sirf: reset controller support - sunxi: continuing the relicensing under dual GPL/MIT - sunxi: lots of new on-chip device support - sunxi: working simplefb support (long awaited) - various: provide stdout-path property for earlycon" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (510 commits) ARM: dts: rk3288: add arm,cpu-registers-not-fw-configured Revert "ARM: dts: rockchip: temporarily disable smp on rk3288" ARM: BCM5301X: Add DT for Buffalo WZR-600DHP2 ARM: BCM5301X: Add DT for Asus RT-N18U ARM: BCM5301X: Add DT for Buffalo WZR-1750DHP ARM: BCM5301X: Add DT for Netgear R6300 V2 ARM: BCM5301X: Add buttons for Netgear R6250 ARM: dts: rockchip: Add input voltage supply regulators in pmic for Marsboard ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file arm: dts: zynq: Add Digilent ZYBO board arm: dts: zynq: Move crystal freq. to board level doc: dt: vendor-prefixes: Add Digilent Inc Documentation: devicetree: Fix Xilinx VDMA specification ARM: dts: rockchip: set FIFO size for SDMMC, SDIO and EMMC on rk3066 and rk3188 ARM: dts: rockchip: add label property for leds on Radxa Rock ARM: BCM5301X: Add LEDs for Netgear R6250 V1 ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file ARM: dts: add sysreg phandle to i2c device nodes for exynos ARM: dts: Remove unused bootargs from exynos3250-rinato ARM: dts: add board dts file for Exynos3250-based Monk board ...
1461 lines
41 KiB
Plaintext
1461 lines
41 KiB
Plaintext
/*
|
|
* Device Tree Source for the r8a7790 SoC
|
|
*
|
|
* Copyright (C) 2013-2014 Renesas Solutions Corp.
|
|
* Copyright (C) 2014 Cogent Embedded Inc.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <dt-bindings/clock/r8a7790-clock.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
compatible = "renesas,r8a7790";
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
aliases {
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
i2c2 = &i2c2;
|
|
i2c3 = &i2c3;
|
|
i2c4 = &iic0;
|
|
i2c5 = &iic1;
|
|
i2c6 = &iic2;
|
|
i2c7 = &iic3;
|
|
spi0 = &qspi;
|
|
spi1 = &msiof0;
|
|
spi2 = &msiof1;
|
|
spi3 = &msiof2;
|
|
spi4 = &msiof3;
|
|
vin0 = &vin0;
|
|
vin1 = &vin1;
|
|
vin2 = &vin2;
|
|
vin3 = &vin3;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0>;
|
|
clock-frequency = <1300000000>;
|
|
voltage-tolerance = <1>; /* 1% */
|
|
clocks = <&cpg_clocks R8A7790_CLK_Z>;
|
|
clock-latency = <300000>; /* 300 us */
|
|
|
|
/* kHz - uV - OPPs unknown yet */
|
|
operating-points = <1400000 1000000>,
|
|
<1225000 1000000>,
|
|
<1050000 1000000>,
|
|
< 875000 1000000>,
|
|
< 700000 1000000>,
|
|
< 350000 1000000>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <1>;
|
|
clock-frequency = <1300000000>;
|
|
};
|
|
|
|
cpu2: cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <2>;
|
|
clock-frequency = <1300000000>;
|
|
};
|
|
|
|
cpu3: cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <3>;
|
|
clock-frequency = <1300000000>;
|
|
};
|
|
|
|
cpu4: cpu@4 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x100>;
|
|
clock-frequency = <780000000>;
|
|
};
|
|
|
|
cpu5: cpu@5 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x101>;
|
|
clock-frequency = <780000000>;
|
|
};
|
|
|
|
cpu6: cpu@6 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x102>;
|
|
clock-frequency = <780000000>;
|
|
};
|
|
|
|
cpu7: cpu@7 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x103>;
|
|
clock-frequency = <780000000>;
|
|
};
|
|
};
|
|
|
|
gic: interrupt-controller@f1001000 {
|
|
compatible = "arm,cortex-a15-gic";
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <0>;
|
|
interrupt-controller;
|
|
reg = <0 0xf1001000 0 0x1000>,
|
|
<0 0xf1002000 0 0x1000>,
|
|
<0 0xf1004000 0 0x2000>,
|
|
<0 0xf1006000 0 0x2000>;
|
|
interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
};
|
|
|
|
gpio0: gpio@e6050000 {
|
|
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
|
|
reg = <0 0xe6050000 0 0x50>;
|
|
interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pfc 0 0 32>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
clocks = <&mstp9_clks R8A7790_CLK_GPIO0>;
|
|
};
|
|
|
|
gpio1: gpio@e6051000 {
|
|
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
|
|
reg = <0 0xe6051000 0 0x50>;
|
|
interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pfc 0 32 32>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
clocks = <&mstp9_clks R8A7790_CLK_GPIO1>;
|
|
};
|
|
|
|
gpio2: gpio@e6052000 {
|
|
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
|
|
reg = <0 0xe6052000 0 0x50>;
|
|
interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pfc 0 64 32>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
clocks = <&mstp9_clks R8A7790_CLK_GPIO2>;
|
|
};
|
|
|
|
gpio3: gpio@e6053000 {
|
|
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
|
|
reg = <0 0xe6053000 0 0x50>;
|
|
interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pfc 0 96 32>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
clocks = <&mstp9_clks R8A7790_CLK_GPIO3>;
|
|
};
|
|
|
|
gpio4: gpio@e6054000 {
|
|
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
|
|
reg = <0 0xe6054000 0 0x50>;
|
|
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pfc 0 128 32>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
clocks = <&mstp9_clks R8A7790_CLK_GPIO4>;
|
|
};
|
|
|
|
gpio5: gpio@e6055000 {
|
|
compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
|
|
reg = <0 0xe6055000 0 0x50>;
|
|
interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
gpio-ranges = <&pfc 0 160 32>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
clocks = <&mstp9_clks R8A7790_CLK_GPIO5>;
|
|
};
|
|
|
|
thermal@e61f0000 {
|
|
compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal";
|
|
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
|
|
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
cmt0: timer@ffca0000 {
|
|
compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
|
|
reg = <0 0xffca0000 0 0x1004>;
|
|
interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 143 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp1_clks R8A7790_CLK_CMT0>;
|
|
clock-names = "fck";
|
|
|
|
renesas,channels-mask = <0x60>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
cmt1: timer@e6130000 {
|
|
compatible = "renesas,cmt-48-r8a7790", "renesas,cmt-48-gen2";
|
|
reg = <0 0xe6130000 0 0x1004>;
|
|
interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 121 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 122 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 123 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 124 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 125 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 126 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 127 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp3_clks R8A7790_CLK_CMT1>;
|
|
clock-names = "fck";
|
|
|
|
renesas,channels-mask = <0xff>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
irqc0: interrupt-controller@e61c0000 {
|
|
compatible = "renesas,irqc-r8a7790", "renesas,irqc";
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
reg = <0 0xe61c0000 0 0x200>;
|
|
interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 1 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 2 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
dmac0: dma-controller@e6700000 {
|
|
compatible = "renesas,rcar-dmac";
|
|
reg = <0 0xe6700000 0 0x20000>;
|
|
interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH
|
|
0 200 IRQ_TYPE_LEVEL_HIGH
|
|
0 201 IRQ_TYPE_LEVEL_HIGH
|
|
0 202 IRQ_TYPE_LEVEL_HIGH
|
|
0 203 IRQ_TYPE_LEVEL_HIGH
|
|
0 204 IRQ_TYPE_LEVEL_HIGH
|
|
0 205 IRQ_TYPE_LEVEL_HIGH
|
|
0 206 IRQ_TYPE_LEVEL_HIGH
|
|
0 207 IRQ_TYPE_LEVEL_HIGH
|
|
0 208 IRQ_TYPE_LEVEL_HIGH
|
|
0 209 IRQ_TYPE_LEVEL_HIGH
|
|
0 210 IRQ_TYPE_LEVEL_HIGH
|
|
0 211 IRQ_TYPE_LEVEL_HIGH
|
|
0 212 IRQ_TYPE_LEVEL_HIGH
|
|
0 213 IRQ_TYPE_LEVEL_HIGH
|
|
0 214 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "error",
|
|
"ch0", "ch1", "ch2", "ch3",
|
|
"ch4", "ch5", "ch6", "ch7",
|
|
"ch8", "ch9", "ch10", "ch11",
|
|
"ch12", "ch13", "ch14";
|
|
clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>;
|
|
clock-names = "fck";
|
|
#dma-cells = <1>;
|
|
dma-channels = <15>;
|
|
};
|
|
|
|
dmac1: dma-controller@e6720000 {
|
|
compatible = "renesas,rcar-dmac";
|
|
reg = <0 0xe6720000 0 0x20000>;
|
|
interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
|
|
0 216 IRQ_TYPE_LEVEL_HIGH
|
|
0 217 IRQ_TYPE_LEVEL_HIGH
|
|
0 218 IRQ_TYPE_LEVEL_HIGH
|
|
0 219 IRQ_TYPE_LEVEL_HIGH
|
|
0 308 IRQ_TYPE_LEVEL_HIGH
|
|
0 309 IRQ_TYPE_LEVEL_HIGH
|
|
0 310 IRQ_TYPE_LEVEL_HIGH
|
|
0 311 IRQ_TYPE_LEVEL_HIGH
|
|
0 312 IRQ_TYPE_LEVEL_HIGH
|
|
0 313 IRQ_TYPE_LEVEL_HIGH
|
|
0 314 IRQ_TYPE_LEVEL_HIGH
|
|
0 315 IRQ_TYPE_LEVEL_HIGH
|
|
0 316 IRQ_TYPE_LEVEL_HIGH
|
|
0 317 IRQ_TYPE_LEVEL_HIGH
|
|
0 318 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "error",
|
|
"ch0", "ch1", "ch2", "ch3",
|
|
"ch4", "ch5", "ch6", "ch7",
|
|
"ch8", "ch9", "ch10", "ch11",
|
|
"ch12", "ch13", "ch14";
|
|
clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>;
|
|
clock-names = "fck";
|
|
#dma-cells = <1>;
|
|
dma-channels = <15>;
|
|
};
|
|
|
|
audma0: dma-controller@ec700000 {
|
|
compatible = "renesas,rcar-dmac";
|
|
reg = <0 0xec700000 0 0x10000>;
|
|
interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH
|
|
0 320 IRQ_TYPE_LEVEL_HIGH
|
|
0 321 IRQ_TYPE_LEVEL_HIGH
|
|
0 322 IRQ_TYPE_LEVEL_HIGH
|
|
0 323 IRQ_TYPE_LEVEL_HIGH
|
|
0 324 IRQ_TYPE_LEVEL_HIGH
|
|
0 325 IRQ_TYPE_LEVEL_HIGH
|
|
0 326 IRQ_TYPE_LEVEL_HIGH
|
|
0 327 IRQ_TYPE_LEVEL_HIGH
|
|
0 328 IRQ_TYPE_LEVEL_HIGH
|
|
0 329 IRQ_TYPE_LEVEL_HIGH
|
|
0 330 IRQ_TYPE_LEVEL_HIGH
|
|
0 331 IRQ_TYPE_LEVEL_HIGH
|
|
0 332 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "error",
|
|
"ch0", "ch1", "ch2", "ch3",
|
|
"ch4", "ch5", "ch6", "ch7",
|
|
"ch8", "ch9", "ch10", "ch11",
|
|
"ch12";
|
|
clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>;
|
|
clock-names = "fck";
|
|
#dma-cells = <1>;
|
|
dma-channels = <13>;
|
|
};
|
|
|
|
audma1: dma-controller@ec720000 {
|
|
compatible = "renesas,rcar-dmac";
|
|
reg = <0 0xec720000 0 0x10000>;
|
|
interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH
|
|
0 333 IRQ_TYPE_LEVEL_HIGH
|
|
0 334 IRQ_TYPE_LEVEL_HIGH
|
|
0 335 IRQ_TYPE_LEVEL_HIGH
|
|
0 336 IRQ_TYPE_LEVEL_HIGH
|
|
0 337 IRQ_TYPE_LEVEL_HIGH
|
|
0 338 IRQ_TYPE_LEVEL_HIGH
|
|
0 339 IRQ_TYPE_LEVEL_HIGH
|
|
0 340 IRQ_TYPE_LEVEL_HIGH
|
|
0 341 IRQ_TYPE_LEVEL_HIGH
|
|
0 342 IRQ_TYPE_LEVEL_HIGH
|
|
0 343 IRQ_TYPE_LEVEL_HIGH
|
|
0 344 IRQ_TYPE_LEVEL_HIGH
|
|
0 345 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "error",
|
|
"ch0", "ch1", "ch2", "ch3",
|
|
"ch4", "ch5", "ch6", "ch7",
|
|
"ch8", "ch9", "ch10", "ch11",
|
|
"ch12";
|
|
clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>;
|
|
clock-names = "fck";
|
|
#dma-cells = <1>;
|
|
dma-channels = <13>;
|
|
};
|
|
|
|
audmapp: dma-controller@ec740000 {
|
|
compatible = "renesas,rcar-audmapp";
|
|
#dma-cells = <1>;
|
|
|
|
reg = <0 0xec740000 0 0x200>;
|
|
};
|
|
|
|
i2c0: i2c@e6508000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "renesas,i2c-r8a7790";
|
|
reg = <0 0xe6508000 0 0x40>;
|
|
interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@e6518000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "renesas,i2c-r8a7790";
|
|
reg = <0 0xe6518000 0 0x40>;
|
|
interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@e6530000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "renesas,i2c-r8a7790";
|
|
reg = <0 0xe6530000 0 0x40>;
|
|
interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@e6540000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "renesas,i2c-r8a7790";
|
|
reg = <0 0xe6540000 0 0x40>;
|
|
interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp9_clks R8A7790_CLK_I2C3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
iic0: i2c@e6500000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
|
|
reg = <0 0xe6500000 0 0x425>;
|
|
interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
|
|
dmas = <&dmac0 0x61>, <&dmac0 0x62>;
|
|
dma-names = "tx", "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
iic1: i2c@e6510000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
|
|
reg = <0 0xe6510000 0 0x425>;
|
|
interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
|
|
dmas = <&dmac0 0x65>, <&dmac0 0x66>;
|
|
dma-names = "tx", "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
iic2: i2c@e6520000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
|
|
reg = <0 0xe6520000 0 0x425>;
|
|
interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
|
|
dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
|
|
dma-names = "tx", "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
iic3: i2c@e60b0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "renesas,iic-r8a7790", "renesas,rmobile-iic";
|
|
reg = <0 0xe60b0000 0 0x425>;
|
|
interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
|
|
dmas = <&dmac0 0x77>, <&dmac0 0x78>;
|
|
dma-names = "tx", "rx";
|
|
status = "disabled";
|
|
};
|
|
|
|
mmcif0: mmc@ee200000 {
|
|
compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
|
|
reg = <0 0xee200000 0 0x80>;
|
|
interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
|
|
dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
|
|
dma-names = "tx", "rx";
|
|
reg-io-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mmcif1: mmc@ee220000 {
|
|
compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
|
|
reg = <0 0xee220000 0 0x80>;
|
|
interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
|
|
dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
|
|
dma-names = "tx", "rx";
|
|
reg-io-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pfc: pfc@e6060000 {
|
|
compatible = "renesas,pfc-r8a7790";
|
|
reg = <0 0xe6060000 0 0x250>;
|
|
};
|
|
|
|
sdhi0: sd@ee100000 {
|
|
compatible = "renesas,sdhi-r8a7790";
|
|
reg = <0 0xee100000 0 0x200>;
|
|
interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhi1: sd@ee120000 {
|
|
compatible = "renesas,sdhi-r8a7790";
|
|
reg = <0 0xee120000 0 0x200>;
|
|
interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhi2: sd@ee140000 {
|
|
compatible = "renesas,sdhi-r8a7790";
|
|
reg = <0 0xee140000 0 0x100>;
|
|
interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhi3: sd@ee160000 {
|
|
compatible = "renesas,sdhi-r8a7790";
|
|
reg = <0 0xee160000 0 0x100>;
|
|
interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
scifa0: serial@e6c40000 {
|
|
compatible = "renesas,scifa-r8a7790", "renesas,scifa";
|
|
reg = <0 0xe6c40000 0 64>;
|
|
interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
|
|
clock-names = "sci_ick";
|
|
status = "disabled";
|
|
};
|
|
|
|
scifa1: serial@e6c50000 {
|
|
compatible = "renesas,scifa-r8a7790", "renesas,scifa";
|
|
reg = <0 0xe6c50000 0 64>;
|
|
interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
|
|
clock-names = "sci_ick";
|
|
status = "disabled";
|
|
};
|
|
|
|
scifa2: serial@e6c60000 {
|
|
compatible = "renesas,scifa-r8a7790", "renesas,scifa";
|
|
reg = <0 0xe6c60000 0 64>;
|
|
interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
|
|
clock-names = "sci_ick";
|
|
status = "disabled";
|
|
};
|
|
|
|
scifb0: serial@e6c20000 {
|
|
compatible = "renesas,scifb-r8a7790", "renesas,scifb";
|
|
reg = <0 0xe6c20000 0 64>;
|
|
interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
|
|
clock-names = "sci_ick";
|
|
status = "disabled";
|
|
};
|
|
|
|
scifb1: serial@e6c30000 {
|
|
compatible = "renesas,scifb-r8a7790", "renesas,scifb";
|
|
reg = <0 0xe6c30000 0 64>;
|
|
interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
|
|
clock-names = "sci_ick";
|
|
status = "disabled";
|
|
};
|
|
|
|
scifb2: serial@e6ce0000 {
|
|
compatible = "renesas,scifb-r8a7790", "renesas,scifb";
|
|
reg = <0 0xe6ce0000 0 64>;
|
|
interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
|
|
clock-names = "sci_ick";
|
|
status = "disabled";
|
|
};
|
|
|
|
scif0: serial@e6e60000 {
|
|
compatible = "renesas,scif-r8a7790", "renesas,scif";
|
|
reg = <0 0xe6e60000 0 64>;
|
|
interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
|
|
clock-names = "sci_ick";
|
|
status = "disabled";
|
|
};
|
|
|
|
scif1: serial@e6e68000 {
|
|
compatible = "renesas,scif-r8a7790", "renesas,scif";
|
|
reg = <0 0xe6e68000 0 64>;
|
|
interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
|
|
clock-names = "sci_ick";
|
|
status = "disabled";
|
|
};
|
|
|
|
hscif0: serial@e62c0000 {
|
|
compatible = "renesas,hscif-r8a7790", "renesas,hscif";
|
|
reg = <0 0xe62c0000 0 96>;
|
|
interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
|
|
clock-names = "sci_ick";
|
|
status = "disabled";
|
|
};
|
|
|
|
hscif1: serial@e62c8000 {
|
|
compatible = "renesas,hscif-r8a7790", "renesas,hscif";
|
|
reg = <0 0xe62c8000 0 96>;
|
|
interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
|
|
clock-names = "sci_ick";
|
|
status = "disabled";
|
|
};
|
|
|
|
ether: ethernet@ee700000 {
|
|
compatible = "renesas,ether-r8a7790";
|
|
reg = <0 0xee700000 0 0x400>;
|
|
interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp8_clks R8A7790_CLK_ETHER>;
|
|
phy-mode = "rmii";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sata0: sata@ee300000 {
|
|
compatible = "renesas,sata-r8a7790";
|
|
reg = <0 0xee300000 0 0x2000>;
|
|
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp8_clks R8A7790_CLK_SATA0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sata1: sata@ee500000 {
|
|
compatible = "renesas,sata-r8a7790";
|
|
reg = <0 0xee500000 0 0x2000>;
|
|
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp8_clks R8A7790_CLK_SATA1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
hsusb: usb@e6590000 {
|
|
compatible = "renesas,usbhs-r8a7790";
|
|
reg = <0 0xe6590000 0 0x100>;
|
|
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
|
|
renesas,buswait = <4>;
|
|
phys = <&usb0 1>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
usbphy: usb-phy@e6590100 {
|
|
compatible = "renesas,usb-phy-r8a7790";
|
|
reg = <0 0xe6590100 0 0x100>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
|
|
clock-names = "usbhs";
|
|
status = "disabled";
|
|
|
|
usb0: usb-channel@0 {
|
|
reg = <0>;
|
|
#phy-cells = <1>;
|
|
};
|
|
usb2: usb-channel@2 {
|
|
reg = <2>;
|
|
#phy-cells = <1>;
|
|
};
|
|
};
|
|
|
|
vin0: video@e6ef0000 {
|
|
compatible = "renesas,vin-r8a7790";
|
|
clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
|
|
reg = <0 0xe6ef0000 0 0x1000>;
|
|
interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
vin1: video@e6ef1000 {
|
|
compatible = "renesas,vin-r8a7790";
|
|
clocks = <&mstp8_clks R8A7790_CLK_VIN1>;
|
|
reg = <0 0xe6ef1000 0 0x1000>;
|
|
interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
vin2: video@e6ef2000 {
|
|
compatible = "renesas,vin-r8a7790";
|
|
clocks = <&mstp8_clks R8A7790_CLK_VIN2>;
|
|
reg = <0 0xe6ef2000 0 0x1000>;
|
|
interrupts = <0 190 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
vin3: video@e6ef3000 {
|
|
compatible = "renesas,vin-r8a7790";
|
|
clocks = <&mstp8_clks R8A7790_CLK_VIN3>;
|
|
reg = <0 0xe6ef3000 0 0x1000>;
|
|
interrupts = <0 191 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
};
|
|
|
|
vsp1@fe920000 {
|
|
compatible = "renesas,vsp1";
|
|
reg = <0 0xfe920000 0 0x8000>;
|
|
interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
|
|
|
|
renesas,has-sru;
|
|
renesas,#rpf = <5>;
|
|
renesas,#uds = <1>;
|
|
renesas,#wpf = <4>;
|
|
};
|
|
|
|
vsp1@fe928000 {
|
|
compatible = "renesas,vsp1";
|
|
reg = <0 0xfe928000 0 0x8000>;
|
|
interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
|
|
|
|
renesas,has-lut;
|
|
renesas,has-sru;
|
|
renesas,#rpf = <5>;
|
|
renesas,#uds = <3>;
|
|
renesas,#wpf = <4>;
|
|
};
|
|
|
|
vsp1@fe930000 {
|
|
compatible = "renesas,vsp1";
|
|
reg = <0 0xfe930000 0 0x8000>;
|
|
interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
|
|
|
|
renesas,has-lif;
|
|
renesas,has-lut;
|
|
renesas,#rpf = <4>;
|
|
renesas,#uds = <1>;
|
|
renesas,#wpf = <4>;
|
|
};
|
|
|
|
vsp1@fe938000 {
|
|
compatible = "renesas,vsp1";
|
|
reg = <0 0xfe938000 0 0x8000>;
|
|
interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
|
|
|
|
renesas,has-lif;
|
|
renesas,has-lut;
|
|
renesas,#rpf = <4>;
|
|
renesas,#uds = <1>;
|
|
renesas,#wpf = <4>;
|
|
};
|
|
|
|
du: display@feb00000 {
|
|
compatible = "renesas,du-r8a7790";
|
|
reg = <0 0xfeb00000 0 0x70000>,
|
|
<0 0xfeb90000 0 0x1c>,
|
|
<0 0xfeb94000 0 0x1c>;
|
|
reg-names = "du", "lvds.0", "lvds.1";
|
|
interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 268 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 269 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp7_clks R8A7790_CLK_DU0>,
|
|
<&mstp7_clks R8A7790_CLK_DU1>,
|
|
<&mstp7_clks R8A7790_CLK_DU2>,
|
|
<&mstp7_clks R8A7790_CLK_LVDS0>,
|
|
<&mstp7_clks R8A7790_CLK_LVDS1>;
|
|
clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1";
|
|
status = "disabled";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
du_out_rgb: endpoint {
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
du_out_lvds0: endpoint {
|
|
};
|
|
};
|
|
port@2 {
|
|
reg = <2>;
|
|
du_out_lvds1: endpoint {
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
clocks {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
/* External root clock */
|
|
extal_clk: extal_clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
/* This value must be overriden by the board. */
|
|
clock-frequency = <0>;
|
|
clock-output-names = "extal";
|
|
};
|
|
|
|
/* External PCIe clock - can be overridden by the board */
|
|
pcie_bus_clk: pcie_bus_clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <100000000>;
|
|
clock-output-names = "pcie_bus";
|
|
status = "disabled";
|
|
};
|
|
|
|
/*
|
|
* The external audio clocks are configured as 0 Hz fixed frequency clocks by
|
|
* default. Boards that provide audio clocks should override them.
|
|
*/
|
|
audio_clk_a: audio_clk_a {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <0>;
|
|
clock-output-names = "audio_clk_a";
|
|
};
|
|
audio_clk_b: audio_clk_b {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <0>;
|
|
clock-output-names = "audio_clk_b";
|
|
};
|
|
audio_clk_c: audio_clk_c {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <0>;
|
|
clock-output-names = "audio_clk_c";
|
|
};
|
|
|
|
/* Special CPG clocks */
|
|
cpg_clocks: cpg_clocks@e6150000 {
|
|
compatible = "renesas,r8a7790-cpg-clocks",
|
|
"renesas,rcar-gen2-cpg-clocks";
|
|
reg = <0 0xe6150000 0 0x1000>;
|
|
clocks = <&extal_clk>;
|
|
#clock-cells = <1>;
|
|
clock-output-names = "main", "pll0", "pll1", "pll3",
|
|
"lb", "qspi", "sdh", "sd0", "sd1",
|
|
"z";
|
|
};
|
|
|
|
/* Variable factor clocks */
|
|
sd2_clk: sd2_clk@e6150078 {
|
|
compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
|
|
reg = <0 0xe6150078 0 4>;
|
|
clocks = <&pll1_div2_clk>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "sd2";
|
|
};
|
|
sd3_clk: sd3_clk@e615026c {
|
|
compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
|
|
reg = <0 0xe615026c 0 4>;
|
|
clocks = <&pll1_div2_clk>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "sd3";
|
|
};
|
|
mmc0_clk: mmc0_clk@e6150240 {
|
|
compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
|
|
reg = <0 0xe6150240 0 4>;
|
|
clocks = <&pll1_div2_clk>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "mmc0";
|
|
};
|
|
mmc1_clk: mmc1_clk@e6150244 {
|
|
compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
|
|
reg = <0 0xe6150244 0 4>;
|
|
clocks = <&pll1_div2_clk>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "mmc1";
|
|
};
|
|
ssp_clk: ssp_clk@e6150248 {
|
|
compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
|
|
reg = <0 0xe6150248 0 4>;
|
|
clocks = <&pll1_div2_clk>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "ssp";
|
|
};
|
|
ssprs_clk: ssprs_clk@e615024c {
|
|
compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
|
|
reg = <0 0xe615024c 0 4>;
|
|
clocks = <&pll1_div2_clk>;
|
|
#clock-cells = <0>;
|
|
clock-output-names = "ssprs";
|
|
};
|
|
|
|
/* Fixed factor clocks */
|
|
pll1_div2_clk: pll1_div2_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
|
|
#clock-cells = <0>;
|
|
clock-div = <2>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "pll1_div2";
|
|
};
|
|
z2_clk: z2_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
|
|
#clock-cells = <0>;
|
|
clock-div = <2>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "z2";
|
|
};
|
|
zg_clk: zg_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
|
|
#clock-cells = <0>;
|
|
clock-div = <3>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "zg";
|
|
};
|
|
zx_clk: zx_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
|
|
#clock-cells = <0>;
|
|
clock-div = <3>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "zx";
|
|
};
|
|
zs_clk: zs_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
|
|
#clock-cells = <0>;
|
|
clock-div = <6>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "zs";
|
|
};
|
|
hp_clk: hp_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
|
|
#clock-cells = <0>;
|
|
clock-div = <12>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "hp";
|
|
};
|
|
i_clk: i_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
|
|
#clock-cells = <0>;
|
|
clock-div = <2>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "i";
|
|
};
|
|
b_clk: b_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
|
|
#clock-cells = <0>;
|
|
clock-div = <12>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "b";
|
|
};
|
|
p_clk: p_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
|
|
#clock-cells = <0>;
|
|
clock-div = <24>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "p";
|
|
};
|
|
cl_clk: cl_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
|
|
#clock-cells = <0>;
|
|
clock-div = <48>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "cl";
|
|
};
|
|
m2_clk: m2_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
|
|
#clock-cells = <0>;
|
|
clock-div = <8>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "m2";
|
|
};
|
|
imp_clk: imp_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
|
|
#clock-cells = <0>;
|
|
clock-div = <4>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "imp";
|
|
};
|
|
rclk_clk: rclk_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
|
|
#clock-cells = <0>;
|
|
clock-div = <(48 * 1024)>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "rclk";
|
|
};
|
|
oscclk_clk: oscclk_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&cpg_clocks R8A7790_CLK_PLL1>;
|
|
#clock-cells = <0>;
|
|
clock-div = <(12 * 1024)>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "oscclk";
|
|
};
|
|
zb3_clk: zb3_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
|
|
#clock-cells = <0>;
|
|
clock-div = <4>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "zb3";
|
|
};
|
|
zb3d2_clk: zb3d2_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
|
|
#clock-cells = <0>;
|
|
clock-div = <8>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "zb3d2";
|
|
};
|
|
ddr_clk: ddr_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&cpg_clocks R8A7790_CLK_PLL3>;
|
|
#clock-cells = <0>;
|
|
clock-div = <8>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "ddr";
|
|
};
|
|
mp_clk: mp_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&pll1_div2_clk>;
|
|
#clock-cells = <0>;
|
|
clock-div = <15>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "mp";
|
|
};
|
|
cp_clk: cp_clk {
|
|
compatible = "fixed-factor-clock";
|
|
clocks = <&extal_clk>;
|
|
#clock-cells = <0>;
|
|
clock-div = <2>;
|
|
clock-mult = <1>;
|
|
clock-output-names = "cp";
|
|
};
|
|
|
|
/* Gate clocks */
|
|
mstp0_clks: mstp0_clks@e6150130 {
|
|
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
|
|
reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>;
|
|
clocks = <&mp_clk>;
|
|
#clock-cells = <1>;
|
|
renesas,clock-indices = <R8A7790_CLK_MSIOF0>;
|
|
clock-output-names = "msiof0";
|
|
};
|
|
mstp1_clks: mstp1_clks@e6150134 {
|
|
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
|
|
reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
|
|
clocks = <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&m2_clk>,
|
|
<&zs_clk>, <&p_clk>, <&zg_clk>, <&zs_clk>, <&zs_clk>,
|
|
<&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
|
|
<&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
|
|
#clock-cells = <1>;
|
|
renesas,clock-indices = <
|
|
R8A7790_CLK_VCP1 R8A7790_CLK_VCP0 R8A7790_CLK_VPC1
|
|
R8A7790_CLK_VPC0 R8A7790_CLK_JPU R8A7790_CLK_SSP1
|
|
R8A7790_CLK_TMU1 R8A7790_CLK_3DG R8A7790_CLK_2DDMAC
|
|
R8A7790_CLK_FDP1_2 R8A7790_CLK_FDP1_1 R8A7790_CLK_FDP1_0
|
|
R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0
|
|
R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 R8A7790_CLK_VSP1_DU0
|
|
R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S
|
|
>;
|
|
clock-output-names =
|
|
"vcp1", "vcp0", "vpc1", "vpc0", "jpu", "ssp1",
|
|
"tmu1", "3dg", "2ddmac", "fdp1-2", "fdp1-1",
|
|
"fdp1-0", "tmu3", "tmu2", "cmt0", "tmu0",
|
|
"vsp1-du1", "vsp1-du0", "vsp1-rt", "vsp1-sy";
|
|
};
|
|
mstp2_clks: mstp2_clks@e6150138 {
|
|
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
|
|
reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>;
|
|
clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>,
|
|
<&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&zs_clk>,
|
|
<&zs_clk>;
|
|
#clock-cells = <1>;
|
|
renesas,clock-indices = <
|
|
R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0
|
|
R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1
|
|
R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2
|
|
R8A7790_CLK_SYS_DMAC1 R8A7790_CLK_SYS_DMAC0
|
|
>;
|
|
clock-output-names =
|
|
"scifa2", "scifa1", "scifa0", "msiof2", "scifb0",
|
|
"scifb1", "msiof1", "msiof3", "scifb2",
|
|
"sys-dmac1", "sys-dmac0";
|
|
};
|
|
mstp3_clks: mstp3_clks@e615013c {
|
|
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
|
|
reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
|
|
clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>,
|
|
<&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>,
|
|
<&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>,
|
|
<&hp_clk>, <&hp_clk>;
|
|
#clock-cells = <1>;
|
|
renesas,clock-indices = <
|
|
R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
|
|
R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0
|
|
R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1
|
|
R8A7790_CLK_USBDMAC0 R8A7790_CLK_USBDMAC1
|
|
>;
|
|
clock-output-names =
|
|
"iic2", "tpu0", "mmcif1", "sdhi3",
|
|
"sdhi2", "sdhi1", "sdhi0", "mmcif0",
|
|
"iic0", "pciec", "iic1", "ssusb", "cmt1",
|
|
"usbdmac0", "usbdmac1";
|
|
};
|
|
mstp5_clks: mstp5_clks@e6150144 {
|
|
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
|
|
reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
|
|
clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>;
|
|
#clock-cells = <1>;
|
|
renesas,clock-indices = <R8A7790_CLK_AUDIO_DMAC0 R8A7790_CLK_AUDIO_DMAC1
|
|
R8A7790_CLK_THERMAL R8A7790_CLK_PWM>;
|
|
clock-output-names = "audmac0", "audmac1", "thermal", "pwm";
|
|
};
|
|
mstp7_clks: mstp7_clks@e615014c {
|
|
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
|
|
reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>;
|
|
clocks = <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
|
|
<&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>,
|
|
<&zx_clk>;
|
|
#clock-cells = <1>;
|
|
renesas,clock-indices = <
|
|
R8A7790_CLK_EHCI R8A7790_CLK_HSUSB R8A7790_CLK_HSCIF1
|
|
R8A7790_CLK_HSCIF0 R8A7790_CLK_SCIF1 R8A7790_CLK_SCIF0
|
|
R8A7790_CLK_DU2 R8A7790_CLK_DU1 R8A7790_CLK_DU0
|
|
R8A7790_CLK_LVDS1 R8A7790_CLK_LVDS0
|
|
>;
|
|
clock-output-names =
|
|
"ehci", "hsusb", "hscif1", "hscif0", "scif1",
|
|
"scif0", "du2", "du1", "du0", "lvds1", "lvds0";
|
|
};
|
|
mstp8_clks: mstp8_clks@e6150990 {
|
|
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
|
|
reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
|
|
clocks = <&zg_clk>, <&zg_clk>, <&zg_clk>, <&zg_clk>, <&p_clk>,
|
|
<&zs_clk>, <&zs_clk>;
|
|
#clock-cells = <1>;
|
|
renesas,clock-indices = <
|
|
R8A7790_CLK_VIN3 R8A7790_CLK_VIN2 R8A7790_CLK_VIN1
|
|
R8A7790_CLK_VIN0 R8A7790_CLK_ETHER R8A7790_CLK_SATA1
|
|
R8A7790_CLK_SATA0
|
|
>;
|
|
clock-output-names =
|
|
"vin3", "vin2", "vin1", "vin0", "ether", "sata1", "sata0";
|
|
};
|
|
mstp9_clks: mstp9_clks@e6150994 {
|
|
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
|
|
reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>;
|
|
clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>,
|
|
<&cp_clk>, <&cp_clk>, <&cp_clk>,
|
|
<&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, <&cp_clk>,
|
|
<&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>;
|
|
#clock-cells = <1>;
|
|
renesas,clock-indices = <
|
|
R8A7790_CLK_GPIO5 R8A7790_CLK_GPIO4 R8A7790_CLK_GPIO3
|
|
R8A7790_CLK_GPIO2 R8A7790_CLK_GPIO1 R8A7790_CLK_GPIO0
|
|
R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD R8A7790_CLK_IICDVFS
|
|
R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 R8A7790_CLK_I2C0
|
|
>;
|
|
clock-output-names =
|
|
"gpio5", "gpio4", "gpio3", "gpio2", "gpio1", "gpio0",
|
|
"rcan1", "rcan0", "qspi_mod", "iic3",
|
|
"i2c3", "i2c2", "i2c1", "i2c0";
|
|
};
|
|
mstp10_clks: mstp10_clks@e6150998 {
|
|
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
|
|
reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>;
|
|
clocks = <&p_clk>,
|
|
<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
|
|
<&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>,
|
|
<&p_clk>,
|
|
<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
|
|
<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
|
|
<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
|
|
<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
|
|
<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>,
|
|
<&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>;
|
|
|
|
#clock-cells = <1>;
|
|
clock-indices = <
|
|
R8A7790_CLK_SSI_ALL
|
|
R8A7790_CLK_SSI9 R8A7790_CLK_SSI8 R8A7790_CLK_SSI7 R8A7790_CLK_SSI6 R8A7790_CLK_SSI5
|
|
R8A7790_CLK_SSI4 R8A7790_CLK_SSI3 R8A7790_CLK_SSI2 R8A7790_CLK_SSI1 R8A7790_CLK_SSI0
|
|
R8A7790_CLK_SCU_ALL
|
|
R8A7790_CLK_SCU_DVC1 R8A7790_CLK_SCU_DVC0
|
|
R8A7790_CLK_SCU_SRC9 R8A7790_CLK_SCU_SRC8 R8A7790_CLK_SCU_SRC7 R8A7790_CLK_SCU_SRC6 R8A7790_CLK_SCU_SRC5
|
|
R8A7790_CLK_SCU_SRC4 R8A7790_CLK_SCU_SRC3 R8A7790_CLK_SCU_SRC2 R8A7790_CLK_SCU_SRC1 R8A7790_CLK_SCU_SRC0
|
|
>;
|
|
clock-output-names =
|
|
"ssi-all",
|
|
"ssi9", "ssi8", "ssi7", "ssi6", "ssi5",
|
|
"ssi4", "ssi3", "ssi2", "ssi1", "ssi0",
|
|
"scu-all",
|
|
"scu-dvc1", "scu-dvc0",
|
|
"scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5",
|
|
"scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0";
|
|
};
|
|
};
|
|
|
|
qspi: spi@e6b10000 {
|
|
compatible = "renesas,qspi-r8a7790", "renesas,qspi";
|
|
reg = <0 0xe6b10000 0 0x2c>;
|
|
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp9_clks R8A7790_CLK_QSPI_MOD>;
|
|
dmas = <&dmac0 0x17>, <&dmac0 0x18>;
|
|
dma-names = "tx", "rx";
|
|
num-cs = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
msiof0: spi@e6e20000 {
|
|
compatible = "renesas,msiof-r8a7790";
|
|
reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
|
|
interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp0_clks R8A7790_CLK_MSIOF0>;
|
|
dmas = <&dmac0 0x51>, <&dmac0 0x52>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
msiof1: spi@e6e10000 {
|
|
compatible = "renesas,msiof-r8a7790";
|
|
reg = <0 0xe6e10000 0 0x0064>, <0 0xe7e10000 0 0x0064>;
|
|
interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp2_clks R8A7790_CLK_MSIOF1>;
|
|
dmas = <&dmac0 0x55>, <&dmac0 0x56>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
msiof2: spi@e6e00000 {
|
|
compatible = "renesas,msiof-r8a7790";
|
|
reg = <0 0xe6e00000 0 0x0064>, <0 0xe7e00000 0 0x0064>;
|
|
interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp2_clks R8A7790_CLK_MSIOF2>;
|
|
dmas = <&dmac0 0x41>, <&dmac0 0x42>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
msiof3: spi@e6c90000 {
|
|
compatible = "renesas,msiof-r8a7790";
|
|
reg = <0 0xe6c90000 0 0x0064>, <0 0xe7c90000 0 0x0064>;
|
|
interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp2_clks R8A7790_CLK_MSIOF3>;
|
|
dmas = <&dmac0 0x45>, <&dmac0 0x46>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
xhci: usb@ee000000 {
|
|
compatible = "renesas,xhci-r8a7790";
|
|
reg = <0 0xee000000 0 0xc00>;
|
|
interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
|
|
phys = <&usb2 1>;
|
|
phy-names = "usb";
|
|
status = "disabled";
|
|
};
|
|
|
|
pci0: pci@ee090000 {
|
|
compatible = "renesas,pci-r8a7790";
|
|
device_type = "pci";
|
|
clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
|
|
reg = <0 0xee090000 0 0xc00>,
|
|
<0 0xee080000 0 0x1100>;
|
|
interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
|
|
bus-range = <0 0>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
|
|
interrupt-map-mask = <0xff00 0 0 0x7>;
|
|
interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
|
|
0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
|
|
0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
usb@0,1 {
|
|
reg = <0x800 0 0 0 0>;
|
|
device_type = "pci";
|
|
phys = <&usb0 0>;
|
|
phy-names = "usb";
|
|
};
|
|
|
|
usb@0,2 {
|
|
reg = <0x1000 0 0 0 0>;
|
|
device_type = "pci";
|
|
phys = <&usb0 0>;
|
|
phy-names = "usb";
|
|
};
|
|
};
|
|
|
|
pci1: pci@ee0b0000 {
|
|
compatible = "renesas,pci-r8a7790";
|
|
device_type = "pci";
|
|
clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
|
|
reg = <0 0xee0b0000 0 0xc00>,
|
|
<0 0xee0a0000 0 0x1100>;
|
|
interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
|
|
bus-range = <1 1>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>;
|
|
interrupt-map-mask = <0xff00 0 0 0x7>;
|
|
interrupt-map = <0x0000 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
|
|
0x0800 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH
|
|
0x1000 0 0 2 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
pci2: pci@ee0d0000 {
|
|
compatible = "renesas,pci-r8a7790";
|
|
device_type = "pci";
|
|
clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
|
|
reg = <0 0xee0d0000 0 0xc00>,
|
|
<0 0xee0c0000 0 0x1100>;
|
|
interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
|
|
bus-range = <2 2>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
#interrupt-cells = <1>;
|
|
ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>;
|
|
interrupt-map-mask = <0xff00 0 0 0x7>;
|
|
interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
|
|
0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
|
|
0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
usb@0,1 {
|
|
reg = <0x800 0 0 0 0>;
|
|
device_type = "pci";
|
|
phys = <&usb2 0>;
|
|
phy-names = "usb";
|
|
};
|
|
|
|
usb@0,2 {
|
|
reg = <0x1000 0 0 0 0>;
|
|
device_type = "pci";
|
|
phys = <&usb2 0>;
|
|
phy-names = "usb";
|
|
};
|
|
};
|
|
|
|
pciec: pcie@fe000000 {
|
|
compatible = "renesas,pcie-r8a7790";
|
|
reg = <0 0xfe000000 0 0x80000>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
bus-range = <0x00 0xff>;
|
|
device_type = "pci";
|
|
ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000
|
|
0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000
|
|
0x02000000 0 0x30000000 0 0x30000000 0 0x08000000
|
|
0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>;
|
|
/* Map all possible DDR as inbound ranges */
|
|
dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000
|
|
0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>;
|
|
interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 117 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 118 IRQ_TYPE_LEVEL_HIGH>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0>;
|
|
interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>;
|
|
clock-names = "pcie", "pcie_bus";
|
|
status = "disabled";
|
|
};
|
|
|
|
rcar_sound: rcar_sound@ec500000 {
|
|
#sound-dai-cells = <1>;
|
|
compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound";
|
|
reg = <0 0xec500000 0 0x1000>, /* SCU */
|
|
<0 0xec5a0000 0 0x100>, /* ADG */
|
|
<0 0xec540000 0 0x1000>, /* SSIU */
|
|
<0 0xec541000 0 0x1280>; /* SSI */
|
|
clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>,
|
|
<&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>,
|
|
<&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>,
|
|
<&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>,
|
|
<&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>,
|
|
<&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>,
|
|
<&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>,
|
|
<&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>,
|
|
<&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>,
|
|
<&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>,
|
|
<&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>,
|
|
<&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>,
|
|
<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>;
|
|
clock-names = "ssi-all",
|
|
"ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5",
|
|
"ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0",
|
|
"src.9", "src.8", "src.7", "src.6", "src.5",
|
|
"src.4", "src.3", "src.2", "src.1", "src.0",
|
|
"dvc.0", "dvc.1",
|
|
"clk_a", "clk_b", "clk_c", "clk_i";
|
|
|
|
status = "disabled";
|
|
|
|
rcar_sound,dvc {
|
|
dvc0: dvc@0 { };
|
|
dvc1: dvc@1 { };
|
|
};
|
|
|
|
rcar_sound,src {
|
|
src0: src@0 { };
|
|
src1: src@1 { };
|
|
src2: src@2 { };
|
|
src3: src@3 { };
|
|
src4: src@4 { };
|
|
src5: src@5 { };
|
|
src6: src@6 { };
|
|
src7: src@7 { };
|
|
src8: src@8 { };
|
|
src9: src@9 { };
|
|
};
|
|
|
|
rcar_sound,ssi {
|
|
ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; };
|
|
ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; };
|
|
ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; };
|
|
ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; };
|
|
ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; };
|
|
ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; };
|
|
ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; };
|
|
ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; };
|
|
ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; };
|
|
ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; };
|
|
};
|
|
};
|
|
};
|