redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/scsi
History
Linus Torvalds d5acba26bf Char/Misc driver patches for 4.19-rc1 
Here is the bit set of char/misc drivers for 4.19-rc1
 
 There is a lot here, much more than normal, seems like everyone is
 writing new driver subsystems these days...  Anyway, major things here
 are:
 	- new FSI driver subsystem, yet-another-powerpc low-level
 	  hardware bus
 	- gnss, finally an in-kernel GPS subsystem to try to tame all of
 	  the crazy out-of-tree drivers that have been floating around
 	  for years, combined with some really hacky userspace
 	  implementations.  This is only for GNSS receivers, but you
 	  have to start somewhere, and this is great to see.
 Other than that, there are new slimbus drivers, new coresight drivers,
 new fpga drivers, and loads of DT bindings for all of these and existing
 drivers.
 
 Full details of everything is in the shortlog.
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCW3g7ew8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykfBgCeOG0RkSI92XVZe0hs/QYFW9kk8JYAnRBf3Qpm
 cvW7a+McOoKz/MGmEKsi
 =TNfn
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver updates from Greg KH:
 "Here is the bit set of char/misc drivers for 4.19-rc1

  There is a lot here, much more than normal, seems like everyone is
  writing new driver subsystems these days... Anyway, major things here
  are:

   - new FSI driver subsystem, yet-another-powerpc low-level hardware
     bus

   - gnss, finally an in-kernel GPS subsystem to try to tame all of the
     crazy out-of-tree drivers that have been floating around for years,
     combined with some really hacky userspace implementations. This is
     only for GNSS receivers, but you have to start somewhere, and this
     is great to see.

  Other than that, there are new slimbus drivers, new coresight drivers,
  new fpga drivers, and loads of DT bindings for all of these and
  existing drivers.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (255 commits)
  android: binder: Rate-limit debug and userspace triggered err msgs
  fsi: sbefifo: Bump max command length
  fsi: scom: Fix NULL dereference
  misc: mic: SCIF Fix scif_get_new_port() error handling
  misc: cxl: changed asterisk position
  genwqe: card_base: Use true and false for boolean values
  misc: eeprom: assignment outside the if statement
  uio: potential double frees if __uio_register_device() fails
  eeprom: idt_89hpesx: clean up an error pointer vs NULL inconsistency
  misc: ti-st: Fix memory leak in the error path of probe()
  android: binder: Show extra_buffers_size in trace
  firmware: vpd: Fix section enabled flag on vpd_section_destroy
  platform: goldfish: Retire pdev_bus
  goldfish: Use dedicated macros instead of manual bit shifting
  goldfish: Add missing includes to goldfish.h
  mux: adgs1408: new driver for Analog Devices ADGS1408/1409 mux
  dt-bindings: mux: add adi,adgs1408
  Drivers: hv: vmbus: Cleanup synic memory free path
  Drivers: hv: vmbus: Remove use of slow_virt_to_phys()
  Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()
  ...
2018-08-18 11:04:51 -07:00
..
aacraid SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
aic7xxx SCSI fixes on 20180613 2018-06-14 16:35:32 +09:00
aic94xx scsi: aic94xx: fix an error code in aic94xx_init() 2018-08-08 21:17:56 -04:00
arcmsr scsi: arcmsr: Update driver version to v1.40.00.09-20180709 2018-07-12 22:34:59 -04:00
arm treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
be2iscsi scsi: be2iscsi: Update copyright 2018-06-19 22:02:25 -04:00
bfa scsi: bfa: remove ScsiResult macro 2018-07-10 22:42:47 -04:00
bnx2fc treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
bnx2i scsi: bnx2i: add error handling for ioremap_nocache 2018-06-19 22:02:25 -04:00
csiostor scsi: csiostor: update csio_get_flash_params() 2018-08-02 16:22:10 -04:00
cxgbi scsi: cxgb4i: silence overflow warning in t4_uld_rx_handler() 2018-04-09 21:32:45 -04:00
cxlflash SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
device_handler Merge branch 'fixes' into misc 2018-04-03 17:38:39 -07:00
dpt sched/wait: Rename wait_queue_t => wait_queue_entry_t 2017-06-20 12:18:27 +02:00
esas2r treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
fcoe SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
fnic treewide: Use array_size() in vmalloc() 2018-06-12 16:19:22 -07:00
hisi_sas scsi: hisi_sas: Add SATA FIS check for v3 hw 2018-07-19 21:57:40 -04:00
ibmvscsi scsi: ibmvscsi: change strncpy+truncation to strlcpy 2018-07-30 23:17:53 -04:00
ibmvscsi_tgt scsi: target: srp, vscsi, sbp, qla: use target_remove_session 2018-08-02 15:29:31 -04:00
isci treewide: devm_kzalloc() -> devm_kcalloc() 2018-06-12 16:19:22 -07:00
libfc SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
libsas scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
lpfc scsi: lpfc: update driver version to 12.0.0.6 2018-08-02 15:45:19 -04:00
megaraid scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
mpt3sas SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
mvsas scsi: mvsas: fix wrong endianness of sgpio api 2018-03-01 21:07:48 -05:00
osd SCSI misc on 20180610 2018-06-10 13:01:12 -07:00
pcmcia scsi: remove the fdomain and fdomain_cs drivers 2018-03-19 22:54:47 -04:00
pm8001 treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
qedf scsi: qedf: Send the driver state to MFW 2018-07-10 22:25:23 -04:00
qedi SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
qla2xxx SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
qla4xxx treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
smartpqi scsi: smartpqi: bump driver version to 1.1.4-130 2018-06-19 22:02:25 -04:00
snic scsi: snic: fix printing time intervals 2018-07-12 23:01:16 -04:00
sym53c8xx_2 scsi: sym53c8xx: remove some redundant variables 2018-08-02 16:23:26 -04:00
ufs scsi: ufs: remove unnecessary query(DM) UPIU trace 2018-08-08 21:55:48 -04:00
.gitignore scsi: scsi_devinfo: Add scsi_devinfo_tbl.c 2017-10-25 05:40:22 -04:00
3w-9xxx.c scsi: 3ware: fix return 0 on the error path of probe 2018-07-30 23:17:53 -04:00
3w-9xxx.h scsi: 3w-9xxx: rework lock timeouts 2017-12-04 20:32:53 -05:00
3w-sas.c scsi: 3ware: fix return 0 on the error path of probe 2018-07-30 23:17:53 -04:00
3w-sas.h
3w-xxxx.c scsi: 3ware: fix return 0 on the error path of probe 2018-07-30 23:17:53 -04:00
3w-xxxx.h
53c700.c scsi: 53c700: move bus reset to host reset 2017-08-25 17:21:11 -04:00
53c700.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
53c700.scr
53c700_d.h_shipped
a100u2w.c scsi: a100u2w: Replace mdelay() with msleep() 2018-07-30 23:17:53 -04:00
a100u2w.h
a2091.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
a2091.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
a3000.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
a3000.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
a4000t.c
advansys.c scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
aha152x.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
aha152x.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
aha1542.c treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
aha1542.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
aha1740.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
aha1740.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
am53c974.c scsi: am53c974: Use module_pci_driver 2018-05-01 23:29:41 -04:00
atari_scsi.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
atp870u.c scsi: atp870u: Replace mdelay() with msleep() 2018-07-30 23:17:53 -04:00
atp870u.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
BusLogic.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
BusLogic.h
bvme6000_scsi.c
ch.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
constants.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
dc395x.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
dc395x.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
dmx3191d.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
dpt_i2o.c scsi: dpt_i2o: Remove VLA usage 2018-05-18 12:03:51 -04:00
dpti.h scsi: dpt_i2o: stop using scsi_unregister 2018-03-15 00:25:37 -04:00
esp_scsi.c scsi: esp_scsi: Always clear msg_out_len after MESSAGE OUT phase 2017-08-10 19:55:35 -04:00
esp_scsi.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
FlashPoint.c
g_NCR5380.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
gdth.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
gdth.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
gdth_ioctl.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
gdth_proc.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
gdth_proc.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
gvp11.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
gvp11.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
hosts.c scsi: core: avoid host-wide host_busy counter for scsi_mq 2018-06-26 12:53:26 -04:00
hpsa.c scsi: hpsa: correct enclosure sas address 2018-07-10 22:25:03 -04:00
hpsa.h scsi: hpsa: correct enclosure sas address 2018-07-10 22:25:03 -04:00
hpsa_cmd.h scsi: hpsa: update discovery polling 2017-10-25 04:55:18 -04:00
hptiop.c scsi: hptiop: Simplify reset handling 2017-08-25 17:21:10 -04:00
hptiop.h
imm.c scsi: don't add scsi command result bytes 2018-06-26 12:27:07 -04:00
imm.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
initio.c
initio.h
ipr.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
ipr.h scsi: ipr: Format HCAM overlay ID 0x41 2018-06-19 22:02:25 -04:00
ips.c scsi: ips: fix firmware timestamps for 32-bit 2018-04-20 19:40:17 -04:00
ips.h scsi: ips: fix firmware timestamps for 32-bit 2018-04-20 19:40:17 -04:00
iscsi_boot_sysfs.c
iscsi_tcp.c scsi: iscsi_tcp: don't set a bounce limit 2018-04-19 00:00:44 -04:00
iscsi_tcp.h
jazz_esp.c scsi: jazz_esp, sun3x_esp: Pass struct device pointer in dma calls 2018-03-12 22:05:43 -04:00
Kconfig scsi: remove NCR_Q720 driver 2018-07-10 22:48:54 -04:00
lasi700.c parisc/scsi/lasi700: Fix section mismatches 2017-08-22 16:34:36 +02:00
libiscsi.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
libiscsi_tcp.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
mac53c94.c treewide: kmalloc() -> kmalloc_array() 2018-06-12 16:19:22 -07:00
mac53c94.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mac_esp.c scsi: mac_esp: Fix PIO transfers for MESSAGE IN phase 2017-08-10 19:55:34 -04:00
mac_scsi.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
Makefile SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
megaraid.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
megaraid.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
mesh.c scsi: don't add scsi command result bytes 2018-06-26 12:27:07 -04:00
mesh.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mvme16x_scsi.c
mvme147.c scsi: mvme147: stop using scsi_module.c 2018-03-19 22:54:47 -04:00
mvme147.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mvumi.c SCSI misc on 20180610 2018-06-10 13:01:12 -07:00
mvumi.h
ncr53c8xx.c scsi: ncr53c8xx: remove ScsiResult macro 2018-07-10 22:42:47 -04:00
ncr53c8xx.h
NCR5380.c SCSI misc on 20171114 2017-11-14 16:23:44 -08:00
NCR5380.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
nsp32.c scsi: nsp32: fix logic bug in error handling 2017-10-16 22:38:44 -04:00
nsp32.h
nsp32_debug.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
nsp32_io.h
osst.c treewide: Use array_size() in vmalloc() 2018-06-12 16:19:22 -07:00
osst.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
osst_detect.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
osst_options.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
pmcraid.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
pmcraid.h scsi: pmcraid: Use sgl_alloc_order() and sgl_free_order() 2018-02-13 21:49:15 -05:00
ppa.c scsi: ppa: mark expected switch fall-throughs 2017-12-04 20:32:52 -05:00
ppa.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
ps3rom.c
qla1280.c timer: Remove init_timer_on_stack() in favor of timer_setup_on_stack() 2017-10-05 15:01:17 +02:00
qla1280.h timer: Remove init_timer_on_stack() in favor of timer_setup_on_stack() 2017-10-05 15:01:17 +02:00
qlogicfas.c scsi: qlogicfas: move bus_reset to host_reset 2017-08-25 17:21:11 -04:00
qlogicfas408.c scsi: qlogicfas: move bus_reset to host_reset 2017-08-25 17:21:11 -04:00
qlogicfas408.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
qlogicpti.c scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
qlogicpti.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
raid_class.c scsi: raid_class: Add 'JBOD' RAID level 2018-02-12 11:43:25 -05:00
script_asm.pl
scsi.c scsi: read host_busy via scsi_host_busy() 2018-06-26 12:53:26 -04:00
scsi.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
scsi_common.c scsi: core: doc. fixes to scsi_common.c 2017-12-11 21:39:39 -05:00
scsi_debug.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
scsi_debugfs.c scsi: devinfo: use const_ilog2 for array indices 2018-04-20 19:14:28 -04:00
scsi_debugfs.h
scsi_devinfo.c scsi: devinfo: BLIST_RETRY_ASC_C1 for Fujitsu ETERNUS 2018-04-20 19:14:36 -04:00
scsi_dh.c scsi: scsi_dh: replace too broad "TP9" string with the exact models 2018-04-18 19:34:08 -04:00
scsi_error.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
scsi_ioctl.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
scsi_lib.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
scsi_lib_dma.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_logging.c
scsi_logging.h SCSI misc on 20171114 2017-11-14 16:23:44 -08:00
scsi_netlink.c
scsi_pm.c
scsi_priv.h scsi: dh: Remove scsi_dh_remove_device() 2017-12-07 21:13:45 -05:00
scsi_proc.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_sas_internal.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_scan.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
scsi_sysctl.c
scsi_sysfs.c scsi: core: Avoid that SCSI device removal through sysfs triggers a deadlock 2018-08-02 15:53:36 -04:00
scsi_trace.c
scsi_transport_api.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_transport_fc.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
scsi_transport_iscsi.c block: remove parent device reference from struct bsg_class_device 2018-05-29 13:00:25 -06:00
scsi_transport_sas.c SCSI misc on 20180610 2018-06-10 13:01:12 -07:00
scsi_transport_spi.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
scsi_transport_srp.c for-4.18/block-20180603 2018-06-04 07:58:06 -07:00
scsicam.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sd.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
sd.h block: move dif_prepare/dif_complete functions to block layer 2018-07-30 08:27:02 -06:00
sd_dif.c block: move dif_prepare/dif_complete functions to block layer 2018-07-30 08:27:02 -06:00
sd_zbc.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
sense_codes.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
ses.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
sg.c SCSI misc on 20180815 2018-08-15 22:06:26 -07:00
sgiwd93.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
sim710.c
sni_53c710.c
sr.c scsi: sr: Avoid that opening a CD-ROM hangs with runtime power management enabled 2018-08-03 13:53:51 -04:00
sr.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sr_ioctl.c block: Switch struct packet_command to use struct scsi_sense_hdr 2018-08-02 15:22:13 -06:00
sr_vendor.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
st.c scsi: st: remove redundant pointer STbuffer 2018-08-08 21:15:54 -04:00
st.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
st_options.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
stex.c
storvsc_drv.c use the new async probing feature for the hyperv drivers 2018-07-03 13:02:28 +02:00
sun3_scsi.c scsi: NCR5380: Move bus reset to host reset 2017-08-25 17:21:11 -04:00
sun3_scsi_vme.c
sun3x_esp.c scsi: jazz_esp, sun3x_esp: Pass struct device pointer in dma calls 2018-03-12 22:05:43 -04:00
sun_esp.c scsi: sun_esp: fix device reference leaks 2017-06-27 21:46:55 -04:00
virtio_scsi.c scsi: virtio_scsi: fix pi_bytes{out,in} on 4 KiB block size devices 2018-07-26 15:49:43 -06:00
vmw_pvscsi.c scsi: vmw_pvscsi: Return DID_RESET for status SAM_STAT_COMMAND_TERMINATED 2018-08-03 13:56:22 -04:00
vmw_pvscsi.h
wd33c93.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
wd33c93.h
wd719x.c scsi: wd719x: Use module_pci_driver 2018-05-01 23:30:12 -04:00
wd719x.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
xen-scsifront.c scsi: xen-scsifront: add error handling for xenbus_printf 2018-06-19 14:54:41 +02:00
zalon.c parisc/scsi/zalon: Fix section mismatches 2017-08-22 16:34:36 +02:00
zorro7xx.c
zorro_esp.c scsi: zorro_esp: New driver for Amiga Zorro NCR53C9x boards 2018-04-19 00:00:44 -04:00