1
0
Fork 0
alistair23-linux/drivers/usb
Changming Huang 9d4b827063 fsl/usb: Workarourd for USB erratum-A005697
The EHCI specification states the following in the SUSP bit description:
In the Suspend state, the port is sensitive to resume detection.
Note that the bit status does not change until the port is suspended and
that there may be a delay in suspending a port if there is a transaction
currently in progress on the USB.

However, in NXP USBDR controller, the PORTSCx[SUSP] bit changes immediately
when the application sets it and not when the port is actually suspended.

So the application must wait for at least 10 milliseconds after a port
indicates that it is suspended, to make sure this port has entered
suspended state before initiating this port resume using the Force Port
Resume bit. This bit is for NXP controller, not EHCI compatible.

Signed-off-by: Changming Huang <jerry.huang@nxp.com>
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@nxp.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-05 15:13:58 +01:00
..
atm usb: atm: usbatm: don't print on ENOMEM 2016-08-30 19:17:36 +02:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea - Adding ULPI PHY support for imx53 2016-11-28 08:47:56 +01:00
class cdc-acm: handle read pipe errors 2016-11-21 11:36:16 +01:00
common usb: patches for v4.9 merge window 2016-09-14 20:37:50 +02:00
core usb: hub: Wait for connection to be reestablished after port reset 2016-12-05 15:13:58 +01:00
dwc2 usb: dwc2: Move functions from header to source 2016-11-18 13:54:54 +02:00
dwc3 usb: patches for v4.10 merge window 2016-11-18 16:02:15 +01:00
early treewide: remove redundant #include <linux/kconfig.h> 2016-10-11 15:06:33 -07:00
gadget Merge 4.9-rc7 into usb-next 2016-11-28 08:34:10 +01:00
host fsl/usb: Workarourd for USB erratum-A005697 2016-12-05 15:13:58 +01:00
image usb: microtek: Use "foo *bar" instead of "foo * bar". 2016-06-07 22:18:39 -07:00
isp1760 usb: Convert pr_warning to pr_warn 2016-11-03 10:38:36 +02:00
misc usb: patches for v4.10 merge window 2016-11-18 16:02:15 +01:00
mon usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock 2016-02-06 21:55:57 -08:00
mtu3 usb: mtu3: declare functions static 2016-11-14 10:25:29 +01:00
musb Merge 4.9-rc7 into usb-next 2016-11-28 08:34:10 +01:00
phy usb: twl6030-usb: make driver DT only 2016-11-18 13:54:44 +02:00
renesas_usbhs usb: renesas_usbhs: cleanup with list_first_entry_or_null() 2016-11-03 10:38:37 +02:00
serial USB-serial updates for v4.10-rc1 2016-12-01 16:12:12 +01:00
storage Merge 4.9-rc7 into usb-next 2016-11-28 08:34:10 +01:00
usbip usbip: vudc: Refactor init_vudc_hw() to be more obvious 2016-12-05 15:08:45 +01:00
wusbcore usb: fix improper return value when kzalloc fails 2016-11-29 17:36:43 +01:00
Kconfig usb: Add MediaTek USB3 DRD driver 2016-10-27 17:02:41 +02:00
Makefile usb: Add MediaTek USB3 DRD driver 2016-10-27 17:02:41 +02:00
README
usb-skeleton.c usb: usb-skeleton: don't print on ENOMEM 2016-08-30 19:17:39 +02:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.