1
0
Fork 0
alistair23-linux/drivers/usb
Alan Stern 9da82bd464 USB: implement "soft" unbinding
This patch (as1091) changes the way usbcore handles interface
unbinding.  If the interface's driver supports "soft" unbinding (a new
flag in the driver structure) then in-flight URBs are not cancelled
and endpoints are not disabled.  Instead the driver is allowed to
continue communicating with the device (although of course it should
stop before its disconnect routine returns).

The purpose of this change is to allow drivers to do a clean shutdown
when they get unbound from a device that is still plugged in.  Killing
all the URBs and disabling the endpoints before calling the driver's
disconnect method doesn't give the driver any control over what
happens, and it can leave devices in indeterminate states.  For
example, when usb-storage unbinds it doesn't want to stop while in the
middle of transmitting a SCSI command.

The soft_unbind flag is added because in the past, a number of drivers
have experienced problems related to ongoing I/O after their disconnect
routine returned.  Hence "soft" unbinding is made available only to
drivers that claim to support it.

The patch also replaces "interface_to_usbdev(intf)" with "udev" in a
couple of places, a minor simplification.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-21 15:15:54 -07:00
..
atm cxacru: treat firmware data as const 2008-07-10 14:26:14 +01:00
c67x00 usb/c67x00 endianness annotations 2008-06-04 08:06:01 -07:00
class USB: fix cdc-acm resume() 2008-07-03 18:20:36 -07:00
core USB: implement "soft" unbinding 2008-07-21 15:15:54 -07:00
gadget USB: usb dev_set_name() instead of dev->bus_id 2008-07-21 15:15:47 -07:00
host USB: isp1760-hcd.c: make 2 functions static 2008-07-21 15:15:54 -07:00
image usb: replace remaining __PRETTY_FUNCTION__ occurrences 2008-04-24 21:16:48 -07:00
misc emi62: use request_firmware() 2008-07-10 14:49:14 +01:00
mon USB Monitor: BKL pushdown 2008-06-20 14:05:53 -06:00
serial USB: io_ti: FIrst cut at a big clean up 2008-07-21 15:15:53 -07:00
storage usb-storage: change remaining semaphore to completion 2008-07-21 15:15:53 -07:00
Kconfig USB: add support for SuperH OHCI 2008-02-01 14:35:03 -08:00
Makefile USB: add Cypress c67x00 OTG controller HCD driver 2008-05-02 10:25:57 -07:00
README USB: fix directory references in usb/README 2007-11-28 13:58:34 -08:00
usb-skeleton.c USB: remove unnecessary type casting of urb->context 2008-04-24 21:16:55 -07:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.