Madalin Bucur 9e62b6673d arm64: dts: ls1046ardb: set RGMII interfaces to RGMII_ID mode ... commit d79e9d7c1e upstream. The correct setting for the RGMII ports on LS1046ARDB is to enable delay on both Rx and Tx so the interface mode used must be PHY_INTERFACE_MODE_RGMII_ID. Since commit 1b3047b520 ("net: phy: realtek: add support for configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver has control over the RGMII RX delay and it is disabling it for RGMII_TXID. The LS1046ARDB uses two such PHYs in RGMII_ID mode but in the device tree the mode was described as "rgmii". Changing the phy-connection-type to "rgmii-id" to address the issue. Fixes: 3fa395d2c4 ("arm64: dts: add LS1046A DPAA FMan nodes") Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2020-04-02 15:11:03 +02:00
..
dts	arm64: dts: ls1046ardb: set RGMII interfaces to RGMII_ID mode	2020-04-02 15:11:03 +02:00
.gitignore	…
Makefile	arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'	2020-02-05 21:22:40 +00:00
install.sh	arm64: kbuild: make "make install" not depend on vmlinux	2016-02-19 10:33:35 +00:00