![Michael Hennerich](/assets/img/avatar_default.png)
Some systems using this bus sometimes have very basic devices such as regulators on the bus, so the I2C bus master needs to be loaded early. This also matches the behavior of many other I2C bus master drivers. Therefore initialize via subsys_initcall(). Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
792 lines
20 KiB
C
792 lines
20 KiB
C
/*
|
|
* Blackfin On-Chip Two Wire Interface Driver
|
|
*
|
|
* Copyright 2005-2007 Analog Devices Inc.
|
|
*
|
|
* Enter bugs at http://blackfin.uclinux.org/
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/blackfin.h>
|
|
#include <asm/portmux.h>
|
|
#include <asm/irq.h>
|
|
|
|
/* SMBus mode*/
|
|
#define TWI_I2C_MODE_STANDARD 1
|
|
#define TWI_I2C_MODE_STANDARDSUB 2
|
|
#define TWI_I2C_MODE_COMBINED 3
|
|
#define TWI_I2C_MODE_REPEAT 4
|
|
|
|
struct bfin_twi_iface {
|
|
int irq;
|
|
spinlock_t lock;
|
|
char read_write;
|
|
u8 command;
|
|
u8 *transPtr;
|
|
int readNum;
|
|
int writeNum;
|
|
int cur_mode;
|
|
int manual_stop;
|
|
int result;
|
|
struct i2c_adapter adap;
|
|
struct completion complete;
|
|
struct i2c_msg *pmsg;
|
|
int msg_num;
|
|
int cur_msg;
|
|
u16 saved_clkdiv;
|
|
u16 saved_control;
|
|
void __iomem *regs_base;
|
|
};
|
|
|
|
|
|
#define DEFINE_TWI_REG(reg, off) \
|
|
static inline u16 read_##reg(struct bfin_twi_iface *iface) \
|
|
{ return bfin_read16(iface->regs_base + (off)); } \
|
|
static inline void write_##reg(struct bfin_twi_iface *iface, u16 v) \
|
|
{ bfin_write16(iface->regs_base + (off), v); }
|
|
|
|
DEFINE_TWI_REG(CLKDIV, 0x00)
|
|
DEFINE_TWI_REG(CONTROL, 0x04)
|
|
DEFINE_TWI_REG(SLAVE_CTL, 0x08)
|
|
DEFINE_TWI_REG(SLAVE_STAT, 0x0C)
|
|
DEFINE_TWI_REG(SLAVE_ADDR, 0x10)
|
|
DEFINE_TWI_REG(MASTER_CTL, 0x14)
|
|
DEFINE_TWI_REG(MASTER_STAT, 0x18)
|
|
DEFINE_TWI_REG(MASTER_ADDR, 0x1C)
|
|
DEFINE_TWI_REG(INT_STAT, 0x20)
|
|
DEFINE_TWI_REG(INT_MASK, 0x24)
|
|
DEFINE_TWI_REG(FIFO_CTL, 0x28)
|
|
DEFINE_TWI_REG(FIFO_STAT, 0x2C)
|
|
DEFINE_TWI_REG(XMT_DATA8, 0x80)
|
|
DEFINE_TWI_REG(XMT_DATA16, 0x84)
|
|
DEFINE_TWI_REG(RCV_DATA8, 0x88)
|
|
DEFINE_TWI_REG(RCV_DATA16, 0x8C)
|
|
|
|
static const u16 pin_req[2][3] = {
|
|
{P_TWI0_SCL, P_TWI0_SDA, 0},
|
|
{P_TWI1_SCL, P_TWI1_SDA, 0},
|
|
};
|
|
|
|
static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
|
|
unsigned short twi_int_status)
|
|
{
|
|
unsigned short mast_stat = read_MASTER_STAT(iface);
|
|
|
|
if (twi_int_status & XMTSERV) {
|
|
/* Transmit next data */
|
|
if (iface->writeNum > 0) {
|
|
SSYNC();
|
|
write_XMT_DATA8(iface, *(iface->transPtr++));
|
|
iface->writeNum--;
|
|
}
|
|
/* start receive immediately after complete sending in
|
|
* combine mode.
|
|
*/
|
|
else if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
|
|
write_MASTER_CTL(iface,
|
|
read_MASTER_CTL(iface) | MDIR | RSTART);
|
|
else if (iface->manual_stop)
|
|
write_MASTER_CTL(iface,
|
|
read_MASTER_CTL(iface) | STOP);
|
|
else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
|
|
iface->cur_msg + 1 < iface->msg_num) {
|
|
if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
|
|
write_MASTER_CTL(iface,
|
|
read_MASTER_CTL(iface) | RSTART | MDIR);
|
|
else
|
|
write_MASTER_CTL(iface,
|
|
(read_MASTER_CTL(iface) | RSTART) & ~MDIR);
|
|
}
|
|
}
|
|
if (twi_int_status & RCVSERV) {
|
|
if (iface->readNum > 0) {
|
|
/* Receive next data */
|
|
*(iface->transPtr) = read_RCV_DATA8(iface);
|
|
if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
|
|
/* Change combine mode into sub mode after
|
|
* read first data.
|
|
*/
|
|
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
|
|
/* Get read number from first byte in block
|
|
* combine mode.
|
|
*/
|
|
if (iface->readNum == 1 && iface->manual_stop)
|
|
iface->readNum = *iface->transPtr + 1;
|
|
}
|
|
iface->transPtr++;
|
|
iface->readNum--;
|
|
} else if (iface->manual_stop) {
|
|
write_MASTER_CTL(iface,
|
|
read_MASTER_CTL(iface) | STOP);
|
|
} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
|
|
iface->cur_msg + 1 < iface->msg_num) {
|
|
if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
|
|
write_MASTER_CTL(iface,
|
|
read_MASTER_CTL(iface) | RSTART | MDIR);
|
|
else
|
|
write_MASTER_CTL(iface,
|
|
(read_MASTER_CTL(iface) | RSTART) & ~MDIR);
|
|
}
|
|
}
|
|
if (twi_int_status & MERR) {
|
|
write_INT_MASK(iface, 0);
|
|
write_MASTER_STAT(iface, 0x3e);
|
|
write_MASTER_CTL(iface, 0);
|
|
iface->result = -EIO;
|
|
|
|
if (mast_stat & LOSTARB)
|
|
dev_dbg(&iface->adap.dev, "Lost Arbitration\n");
|
|
if (mast_stat & ANAK)
|
|
dev_dbg(&iface->adap.dev, "Address Not Acknowledged\n");
|
|
if (mast_stat & DNAK)
|
|
dev_dbg(&iface->adap.dev, "Data Not Acknowledged\n");
|
|
if (mast_stat & BUFRDERR)
|
|
dev_dbg(&iface->adap.dev, "Buffer Read Error\n");
|
|
if (mast_stat & BUFWRERR)
|
|
dev_dbg(&iface->adap.dev, "Buffer Write Error\n");
|
|
|
|
/* Faulty slave devices, may drive SDA low after a transfer
|
|
* finishes. To release the bus this code generates up to 9
|
|
* extra clocks until SDA is released.
|
|
*/
|
|
|
|
if (read_MASTER_STAT(iface) & SDASEN) {
|
|
int cnt = 9;
|
|
do {
|
|
write_MASTER_CTL(iface, SCLOVR);
|
|
udelay(6);
|
|
write_MASTER_CTL(iface, 0);
|
|
udelay(6);
|
|
} while ((read_MASTER_STAT(iface) & SDASEN) && cnt--);
|
|
|
|
write_MASTER_CTL(iface, SDAOVR | SCLOVR);
|
|
udelay(6);
|
|
write_MASTER_CTL(iface, SDAOVR);
|
|
udelay(6);
|
|
write_MASTER_CTL(iface, 0);
|
|
}
|
|
|
|
/* If it is a quick transfer, only address without data,
|
|
* not an err, return 1.
|
|
*/
|
|
if (iface->cur_mode == TWI_I2C_MODE_STANDARD &&
|
|
iface->transPtr == NULL &&
|
|
(twi_int_status & MCOMP) && (mast_stat & DNAK))
|
|
iface->result = 1;
|
|
|
|
complete(&iface->complete);
|
|
return;
|
|
}
|
|
if (twi_int_status & MCOMP) {
|
|
if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
|
|
if (iface->readNum == 0) {
|
|
/* set the read number to 1 and ask for manual
|
|
* stop in block combine mode
|
|
*/
|
|
iface->readNum = 1;
|
|
iface->manual_stop = 1;
|
|
write_MASTER_CTL(iface,
|
|
read_MASTER_CTL(iface) | (0xff << 6));
|
|
} else {
|
|
/* set the readd number in other
|
|
* combine mode.
|
|
*/
|
|
write_MASTER_CTL(iface,
|
|
(read_MASTER_CTL(iface) &
|
|
(~(0xff << 6))) |
|
|
(iface->readNum << 6));
|
|
}
|
|
/* remove restart bit and enable master receive */
|
|
write_MASTER_CTL(iface,
|
|
read_MASTER_CTL(iface) & ~RSTART);
|
|
} else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
|
|
iface->cur_msg+1 < iface->msg_num) {
|
|
iface->cur_msg++;
|
|
iface->transPtr = iface->pmsg[iface->cur_msg].buf;
|
|
iface->writeNum = iface->readNum =
|
|
iface->pmsg[iface->cur_msg].len;
|
|
/* Set Transmit device address */
|
|
write_MASTER_ADDR(iface,
|
|
iface->pmsg[iface->cur_msg].addr);
|
|
if (iface->pmsg[iface->cur_msg].flags & I2C_M_RD)
|
|
iface->read_write = I2C_SMBUS_READ;
|
|
else {
|
|
iface->read_write = I2C_SMBUS_WRITE;
|
|
/* Transmit first data */
|
|
if (iface->writeNum > 0) {
|
|
write_XMT_DATA8(iface,
|
|
*(iface->transPtr++));
|
|
iface->writeNum--;
|
|
}
|
|
}
|
|
|
|
if (iface->pmsg[iface->cur_msg].len <= 255)
|
|
write_MASTER_CTL(iface,
|
|
(read_MASTER_CTL(iface) &
|
|
(~(0xff << 6))) |
|
|
(iface->pmsg[iface->cur_msg].len << 6));
|
|
else {
|
|
write_MASTER_CTL(iface,
|
|
(read_MASTER_CTL(iface) |
|
|
(0xff << 6)));
|
|
iface->manual_stop = 1;
|
|
}
|
|
/* remove restart bit and enable master receive */
|
|
write_MASTER_CTL(iface,
|
|
read_MASTER_CTL(iface) & ~RSTART);
|
|
} else {
|
|
iface->result = 1;
|
|
write_INT_MASK(iface, 0);
|
|
write_MASTER_CTL(iface, 0);
|
|
}
|
|
}
|
|
complete(&iface->complete);
|
|
}
|
|
|
|
/* Interrupt handler */
|
|
static irqreturn_t bfin_twi_interrupt_entry(int irq, void *dev_id)
|
|
{
|
|
struct bfin_twi_iface *iface = dev_id;
|
|
unsigned long flags;
|
|
unsigned short twi_int_status;
|
|
|
|
spin_lock_irqsave(&iface->lock, flags);
|
|
while (1) {
|
|
twi_int_status = read_INT_STAT(iface);
|
|
if (!twi_int_status)
|
|
break;
|
|
/* Clear interrupt status */
|
|
write_INT_STAT(iface, twi_int_status);
|
|
bfin_twi_handle_interrupt(iface, twi_int_status);
|
|
SSYNC();
|
|
}
|
|
spin_unlock_irqrestore(&iface->lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* One i2c master transfer
|
|
*/
|
|
static int bfin_twi_do_master_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
struct bfin_twi_iface *iface = adap->algo_data;
|
|
struct i2c_msg *pmsg;
|
|
int rc = 0;
|
|
|
|
if (!(read_CONTROL(iface) & TWI_ENA))
|
|
return -ENXIO;
|
|
|
|
while (read_MASTER_STAT(iface) & BUSBUSY)
|
|
yield();
|
|
|
|
iface->pmsg = msgs;
|
|
iface->msg_num = num;
|
|
iface->cur_msg = 0;
|
|
|
|
pmsg = &msgs[0];
|
|
if (pmsg->flags & I2C_M_TEN) {
|
|
dev_err(&adap->dev, "10 bits addr not supported!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
iface->cur_mode = TWI_I2C_MODE_REPEAT;
|
|
iface->manual_stop = 0;
|
|
iface->transPtr = pmsg->buf;
|
|
iface->writeNum = iface->readNum = pmsg->len;
|
|
iface->result = 0;
|
|
init_completion(&(iface->complete));
|
|
/* Set Transmit device address */
|
|
write_MASTER_ADDR(iface, pmsg->addr);
|
|
|
|
/* FIFO Initiation. Data in FIFO should be
|
|
* discarded before start a new operation.
|
|
*/
|
|
write_FIFO_CTL(iface, 0x3);
|
|
SSYNC();
|
|
write_FIFO_CTL(iface, 0);
|
|
SSYNC();
|
|
|
|
if (pmsg->flags & I2C_M_RD)
|
|
iface->read_write = I2C_SMBUS_READ;
|
|
else {
|
|
iface->read_write = I2C_SMBUS_WRITE;
|
|
/* Transmit first data */
|
|
if (iface->writeNum > 0) {
|
|
write_XMT_DATA8(iface, *(iface->transPtr++));
|
|
iface->writeNum--;
|
|
SSYNC();
|
|
}
|
|
}
|
|
|
|
/* clear int stat */
|
|
write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV);
|
|
|
|
/* Interrupt mask . Enable XMT, RCV interrupt */
|
|
write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
|
|
SSYNC();
|
|
|
|
if (pmsg->len <= 255)
|
|
write_MASTER_CTL(iface, pmsg->len << 6);
|
|
else {
|
|
write_MASTER_CTL(iface, 0xff << 6);
|
|
iface->manual_stop = 1;
|
|
}
|
|
|
|
/* Master enable */
|
|
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
|
|
((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
|
|
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
|
|
SSYNC();
|
|
|
|
while (!iface->result) {
|
|
if (!wait_for_completion_timeout(&iface->complete,
|
|
adap->timeout)) {
|
|
iface->result = -1;
|
|
dev_err(&adap->dev, "master transfer timeout\n");
|
|
}
|
|
}
|
|
|
|
if (iface->result == 1)
|
|
rc = iface->cur_msg + 1;
|
|
else
|
|
rc = iface->result;
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* Generic i2c master transfer entrypoint
|
|
*/
|
|
static int bfin_twi_master_xfer(struct i2c_adapter *adap,
|
|
struct i2c_msg *msgs, int num)
|
|
{
|
|
return bfin_twi_do_master_xfer(adap, msgs, num);
|
|
}
|
|
|
|
/*
|
|
* One I2C SMBus transfer
|
|
*/
|
|
int bfin_twi_do_smbus_xfer(struct i2c_adapter *adap, u16 addr,
|
|
unsigned short flags, char read_write,
|
|
u8 command, int size, union i2c_smbus_data *data)
|
|
{
|
|
struct bfin_twi_iface *iface = adap->algo_data;
|
|
int rc = 0;
|
|
|
|
if (!(read_CONTROL(iface) & TWI_ENA))
|
|
return -ENXIO;
|
|
|
|
while (read_MASTER_STAT(iface) & BUSBUSY)
|
|
yield();
|
|
|
|
iface->writeNum = 0;
|
|
iface->readNum = 0;
|
|
|
|
/* Prepare datas & select mode */
|
|
switch (size) {
|
|
case I2C_SMBUS_QUICK:
|
|
iface->transPtr = NULL;
|
|
iface->cur_mode = TWI_I2C_MODE_STANDARD;
|
|
break;
|
|
case I2C_SMBUS_BYTE:
|
|
if (data == NULL)
|
|
iface->transPtr = NULL;
|
|
else {
|
|
if (read_write == I2C_SMBUS_READ)
|
|
iface->readNum = 1;
|
|
else
|
|
iface->writeNum = 1;
|
|
iface->transPtr = &data->byte;
|
|
}
|
|
iface->cur_mode = TWI_I2C_MODE_STANDARD;
|
|
break;
|
|
case I2C_SMBUS_BYTE_DATA:
|
|
if (read_write == I2C_SMBUS_READ) {
|
|
iface->readNum = 1;
|
|
iface->cur_mode = TWI_I2C_MODE_COMBINED;
|
|
} else {
|
|
iface->writeNum = 1;
|
|
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
|
|
}
|
|
iface->transPtr = &data->byte;
|
|
break;
|
|
case I2C_SMBUS_WORD_DATA:
|
|
if (read_write == I2C_SMBUS_READ) {
|
|
iface->readNum = 2;
|
|
iface->cur_mode = TWI_I2C_MODE_COMBINED;
|
|
} else {
|
|
iface->writeNum = 2;
|
|
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
|
|
}
|
|
iface->transPtr = (u8 *)&data->word;
|
|
break;
|
|
case I2C_SMBUS_PROC_CALL:
|
|
iface->writeNum = 2;
|
|
iface->readNum = 2;
|
|
iface->cur_mode = TWI_I2C_MODE_COMBINED;
|
|
iface->transPtr = (u8 *)&data->word;
|
|
break;
|
|
case I2C_SMBUS_BLOCK_DATA:
|
|
if (read_write == I2C_SMBUS_READ) {
|
|
iface->readNum = 0;
|
|
iface->cur_mode = TWI_I2C_MODE_COMBINED;
|
|
} else {
|
|
iface->writeNum = data->block[0] + 1;
|
|
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
|
|
}
|
|
iface->transPtr = data->block;
|
|
break;
|
|
case I2C_SMBUS_I2C_BLOCK_DATA:
|
|
if (read_write == I2C_SMBUS_READ) {
|
|
iface->readNum = data->block[0];
|
|
iface->cur_mode = TWI_I2C_MODE_COMBINED;
|
|
} else {
|
|
iface->writeNum = data->block[0];
|
|
iface->cur_mode = TWI_I2C_MODE_STANDARDSUB;
|
|
}
|
|
iface->transPtr = (u8 *)&data->block[1];
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
|
|
iface->result = 0;
|
|
iface->manual_stop = 0;
|
|
iface->read_write = read_write;
|
|
iface->command = command;
|
|
init_completion(&(iface->complete));
|
|
|
|
/* FIFO Initiation. Data in FIFO should be discarded before
|
|
* start a new operation.
|
|
*/
|
|
write_FIFO_CTL(iface, 0x3);
|
|
SSYNC();
|
|
write_FIFO_CTL(iface, 0);
|
|
|
|
/* clear int stat */
|
|
write_INT_STAT(iface, MERR | MCOMP | XMTSERV | RCVSERV);
|
|
|
|
/* Set Transmit device address */
|
|
write_MASTER_ADDR(iface, addr);
|
|
SSYNC();
|
|
|
|
switch (iface->cur_mode) {
|
|
case TWI_I2C_MODE_STANDARDSUB:
|
|
write_XMT_DATA8(iface, iface->command);
|
|
write_INT_MASK(iface, MCOMP | MERR |
|
|
((iface->read_write == I2C_SMBUS_READ) ?
|
|
RCVSERV : XMTSERV));
|
|
SSYNC();
|
|
|
|
if (iface->writeNum + 1 <= 255)
|
|
write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
|
|
else {
|
|
write_MASTER_CTL(iface, 0xff << 6);
|
|
iface->manual_stop = 1;
|
|
}
|
|
/* Master enable */
|
|
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
|
|
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
|
|
break;
|
|
case TWI_I2C_MODE_COMBINED:
|
|
write_XMT_DATA8(iface, iface->command);
|
|
write_INT_MASK(iface, MCOMP | MERR | RCVSERV | XMTSERV);
|
|
SSYNC();
|
|
|
|
if (iface->writeNum > 0)
|
|
write_MASTER_CTL(iface, (iface->writeNum + 1) << 6);
|
|
else
|
|
write_MASTER_CTL(iface, 0x1 << 6);
|
|
/* Master enable */
|
|
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
|
|
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ>100) ? FAST : 0));
|
|
break;
|
|
default:
|
|
write_MASTER_CTL(iface, 0);
|
|
if (size != I2C_SMBUS_QUICK) {
|
|
/* Don't access xmit data register when this is a
|
|
* read operation.
|
|
*/
|
|
if (iface->read_write != I2C_SMBUS_READ) {
|
|
if (iface->writeNum > 0) {
|
|
write_XMT_DATA8(iface,
|
|
*(iface->transPtr++));
|
|
if (iface->writeNum <= 255)
|
|
write_MASTER_CTL(iface,
|
|
iface->writeNum << 6);
|
|
else {
|
|
write_MASTER_CTL(iface,
|
|
0xff << 6);
|
|
iface->manual_stop = 1;
|
|
}
|
|
iface->writeNum--;
|
|
} else {
|
|
write_XMT_DATA8(iface, iface->command);
|
|
write_MASTER_CTL(iface, 1 << 6);
|
|
}
|
|
} else {
|
|
if (iface->readNum > 0 && iface->readNum <= 255)
|
|
write_MASTER_CTL(iface,
|
|
iface->readNum << 6);
|
|
else if (iface->readNum > 255) {
|
|
write_MASTER_CTL(iface, 0xff << 6);
|
|
iface->manual_stop = 1;
|
|
} else
|
|
break;
|
|
}
|
|
}
|
|
write_INT_MASK(iface, MCOMP | MERR |
|
|
((iface->read_write == I2C_SMBUS_READ) ?
|
|
RCVSERV : XMTSERV));
|
|
SSYNC();
|
|
|
|
/* Master enable */
|
|
write_MASTER_CTL(iface, read_MASTER_CTL(iface) | MEN |
|
|
((iface->read_write == I2C_SMBUS_READ) ? MDIR : 0) |
|
|
((CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ > 100) ? FAST : 0));
|
|
break;
|
|
}
|
|
SSYNC();
|
|
|
|
while (!iface->result) {
|
|
if (!wait_for_completion_timeout(&iface->complete,
|
|
adap->timeout)) {
|
|
iface->result = -1;
|
|
dev_err(&adap->dev, "smbus transfer timeout\n");
|
|
}
|
|
}
|
|
|
|
rc = (iface->result >= 0) ? 0 : -1;
|
|
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* Generic I2C SMBus transfer entrypoint
|
|
*/
|
|
int bfin_twi_smbus_xfer(struct i2c_adapter *adap, u16 addr,
|
|
unsigned short flags, char read_write,
|
|
u8 command, int size, union i2c_smbus_data *data)
|
|
{
|
|
return bfin_twi_do_smbus_xfer(adap, addr, flags,
|
|
read_write, command, size, data);
|
|
}
|
|
|
|
/*
|
|
* Return what the adapter supports
|
|
*/
|
|
static u32 bfin_twi_functionality(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
|
|
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
|
|
I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL |
|
|
I2C_FUNC_I2C | I2C_FUNC_SMBUS_I2C_BLOCK;
|
|
}
|
|
|
|
static struct i2c_algorithm bfin_twi_algorithm = {
|
|
.master_xfer = bfin_twi_master_xfer,
|
|
.smbus_xfer = bfin_twi_smbus_xfer,
|
|
.functionality = bfin_twi_functionality,
|
|
};
|
|
|
|
static int i2c_bfin_twi_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
|
|
|
|
iface->saved_clkdiv = read_CLKDIV(iface);
|
|
iface->saved_control = read_CONTROL(iface);
|
|
|
|
free_irq(iface->irq, iface);
|
|
|
|
/* Disable TWI */
|
|
write_CONTROL(iface, iface->saved_control & ~TWI_ENA);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_bfin_twi_resume(struct platform_device *pdev)
|
|
{
|
|
struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
|
|
|
|
int rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
|
|
IRQF_DISABLED, pdev->name, iface);
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Resume TWI interface clock as specified */
|
|
write_CLKDIV(iface, iface->saved_clkdiv);
|
|
|
|
/* Resume TWI */
|
|
write_CONTROL(iface, iface->saved_control);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_bfin_twi_probe(struct platform_device *pdev)
|
|
{
|
|
struct bfin_twi_iface *iface;
|
|
struct i2c_adapter *p_adap;
|
|
struct resource *res;
|
|
int rc;
|
|
unsigned int clkhilow;
|
|
|
|
iface = kzalloc(sizeof(struct bfin_twi_iface), GFP_KERNEL);
|
|
if (!iface) {
|
|
dev_err(&pdev->dev, "Cannot allocate memory\n");
|
|
rc = -ENOMEM;
|
|
goto out_error_nomem;
|
|
}
|
|
|
|
spin_lock_init(&(iface->lock));
|
|
|
|
/* Find and map our resources */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (res == NULL) {
|
|
dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n");
|
|
rc = -ENOENT;
|
|
goto out_error_get_res;
|
|
}
|
|
|
|
iface->regs_base = ioremap(res->start, resource_size(res));
|
|
if (iface->regs_base == NULL) {
|
|
dev_err(&pdev->dev, "Cannot map IO\n");
|
|
rc = -ENXIO;
|
|
goto out_error_ioremap;
|
|
}
|
|
|
|
iface->irq = platform_get_irq(pdev, 0);
|
|
if (iface->irq < 0) {
|
|
dev_err(&pdev->dev, "No IRQ specified\n");
|
|
rc = -ENOENT;
|
|
goto out_error_no_irq;
|
|
}
|
|
|
|
p_adap = &iface->adap;
|
|
p_adap->nr = pdev->id;
|
|
strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name));
|
|
p_adap->algo = &bfin_twi_algorithm;
|
|
p_adap->algo_data = iface;
|
|
p_adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
|
|
p_adap->dev.parent = &pdev->dev;
|
|
p_adap->timeout = 5 * HZ;
|
|
p_adap->retries = 3;
|
|
|
|
rc = peripheral_request_list(pin_req[pdev->id], "i2c-bfin-twi");
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "Can't setup pin mux!\n");
|
|
goto out_error_pin_mux;
|
|
}
|
|
|
|
rc = request_irq(iface->irq, bfin_twi_interrupt_entry,
|
|
IRQF_DISABLED, pdev->name, iface);
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq);
|
|
rc = -ENODEV;
|
|
goto out_error_req_irq;
|
|
}
|
|
|
|
/* Set TWI internal clock as 10MHz */
|
|
write_CONTROL(iface, ((get_sclk() / 1000 / 1000 + 5) / 10) & 0x7F);
|
|
|
|
/*
|
|
* We will not end up with a CLKDIV=0 because no one will specify
|
|
* 20kHz SCL or less in Kconfig now. (5 * 1000 / 20 = 250)
|
|
*/
|
|
clkhilow = ((10 * 1000 / CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ) + 1) / 2;
|
|
|
|
/* Set Twi interface clock as specified */
|
|
write_CLKDIV(iface, (clkhilow << 8) | clkhilow);
|
|
|
|
/* Enable TWI */
|
|
write_CONTROL(iface, read_CONTROL(iface) | TWI_ENA);
|
|
SSYNC();
|
|
|
|
rc = i2c_add_numbered_adapter(p_adap);
|
|
if (rc < 0) {
|
|
dev_err(&pdev->dev, "Can't add i2c adapter!\n");
|
|
goto out_error_add_adapter;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, iface);
|
|
|
|
dev_info(&pdev->dev, "Blackfin BF5xx on-chip I2C TWI Contoller, "
|
|
"regs_base@%p\n", iface->regs_base);
|
|
|
|
return 0;
|
|
|
|
out_error_add_adapter:
|
|
free_irq(iface->irq, iface);
|
|
out_error_req_irq:
|
|
out_error_no_irq:
|
|
peripheral_free_list(pin_req[pdev->id]);
|
|
out_error_pin_mux:
|
|
iounmap(iface->regs_base);
|
|
out_error_ioremap:
|
|
out_error_get_res:
|
|
kfree(iface);
|
|
out_error_nomem:
|
|
return rc;
|
|
}
|
|
|
|
static int i2c_bfin_twi_remove(struct platform_device *pdev)
|
|
{
|
|
struct bfin_twi_iface *iface = platform_get_drvdata(pdev);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
i2c_del_adapter(&(iface->adap));
|
|
free_irq(iface->irq, iface);
|
|
peripheral_free_list(pin_req[pdev->id]);
|
|
iounmap(iface->regs_base);
|
|
kfree(iface);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver i2c_bfin_twi_driver = {
|
|
.probe = i2c_bfin_twi_probe,
|
|
.remove = i2c_bfin_twi_remove,
|
|
.suspend = i2c_bfin_twi_suspend,
|
|
.resume = i2c_bfin_twi_resume,
|
|
.driver = {
|
|
.name = "i2c-bfin-twi",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
static int __init i2c_bfin_twi_init(void)
|
|
{
|
|
return platform_driver_register(&i2c_bfin_twi_driver);
|
|
}
|
|
|
|
static void __exit i2c_bfin_twi_exit(void)
|
|
{
|
|
platform_driver_unregister(&i2c_bfin_twi_driver);
|
|
}
|
|
|
|
subsys_initcall(i2c_bfin_twi_init);
|
|
module_exit(i2c_bfin_twi_exit);
|
|
|
|
MODULE_AUTHOR("Bryan Wu, Sonic Zhang");
|
|
MODULE_DESCRIPTION("Blackfin BF5xx on-chip I2C TWI Contoller Driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:i2c-bfin-twi");
|