![David Howells](/assets/img/avatar_default.png)
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2946 lines
71 KiB
C
2946 lines
71 KiB
C
/*
|
|
* Copyright (C) 2001,2002,2003,2004 Broadcom Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*
|
|
*
|
|
* This driver is designed for the Broadcom SiByte SOC built-in
|
|
* Ethernet controllers. Written by Mitch Lichtenberg at Broadcom Corp.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/init.h>
|
|
#include <linux/bitops.h>
|
|
#include <asm/processor.h> /* Processor type for cache alignment. */
|
|
#include <asm/io.h>
|
|
#include <asm/cache.h>
|
|
|
|
/* This is only here until the firmware is ready. In that case,
|
|
the firmware leaves the ethernet address in the register for us. */
|
|
#ifdef CONFIG_SIBYTE_STANDALONE
|
|
#define SBMAC_ETH0_HWADDR "40:00:00:00:01:00"
|
|
#define SBMAC_ETH1_HWADDR "40:00:00:00:01:01"
|
|
#define SBMAC_ETH2_HWADDR "40:00:00:00:01:02"
|
|
#define SBMAC_ETH3_HWADDR "40:00:00:00:01:03"
|
|
#endif
|
|
|
|
|
|
/* These identify the driver base version and may not be removed. */
|
|
#if 0
|
|
static char version1[] __devinitdata =
|
|
"sb1250-mac.c:1.00 1/11/2001 Written by Mitch Lichtenberg\n";
|
|
#endif
|
|
|
|
|
|
/* Operational parameters that usually are not changed. */
|
|
|
|
#define CONFIG_SBMAC_COALESCE
|
|
|
|
#define MAX_UNITS 4 /* More are supported, limit only on options */
|
|
|
|
/* Time in jiffies before concluding the transmitter is hung. */
|
|
#define TX_TIMEOUT (2*HZ)
|
|
|
|
|
|
MODULE_AUTHOR("Mitch Lichtenberg (Broadcom Corp.)");
|
|
MODULE_DESCRIPTION("Broadcom SiByte SOC GB Ethernet driver");
|
|
|
|
/* A few user-configurable values which may be modified when a driver
|
|
module is loaded. */
|
|
|
|
/* 1 normal messages, 0 quiet .. 7 verbose. */
|
|
static int debug = 1;
|
|
module_param(debug, int, S_IRUGO);
|
|
MODULE_PARM_DESC(debug, "Debug messages");
|
|
|
|
/* mii status msgs */
|
|
static int noisy_mii = 1;
|
|
module_param(noisy_mii, int, S_IRUGO);
|
|
MODULE_PARM_DESC(noisy_mii, "MII status messages");
|
|
|
|
/* Used to pass the media type, etc.
|
|
Both 'options[]' and 'full_duplex[]' should exist for driver
|
|
interoperability.
|
|
The media type is usually passed in 'options[]'.
|
|
*/
|
|
#ifdef MODULE
|
|
static int options[MAX_UNITS] = {-1, -1, -1, -1};
|
|
module_param_array(options, int, NULL, S_IRUGO);
|
|
MODULE_PARM_DESC(options, "1-" __MODULE_STRING(MAX_UNITS));
|
|
|
|
static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1};
|
|
module_param_array(full_duplex, int, NULL, S_IRUGO);
|
|
MODULE_PARM_DESC(full_duplex, "1-" __MODULE_STRING(MAX_UNITS));
|
|
#endif
|
|
|
|
#ifdef CONFIG_SBMAC_COALESCE
|
|
static int int_pktcnt = 0;
|
|
module_param(int_pktcnt, int, S_IRUGO);
|
|
MODULE_PARM_DESC(int_pktcnt, "Packet count");
|
|
|
|
static int int_timeout = 0;
|
|
module_param(int_timeout, int, S_IRUGO);
|
|
MODULE_PARM_DESC(int_timeout, "Timeout value");
|
|
#endif
|
|
|
|
#include <asm/sibyte/sb1250.h>
|
|
#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
|
|
#include <asm/sibyte/bcm1480_regs.h>
|
|
#include <asm/sibyte/bcm1480_int.h>
|
|
#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
|
|
#include <asm/sibyte/sb1250_regs.h>
|
|
#include <asm/sibyte/sb1250_int.h>
|
|
#else
|
|
#error invalid SiByte MAC configuation
|
|
#endif
|
|
#include <asm/sibyte/sb1250_scd.h>
|
|
#include <asm/sibyte/sb1250_mac.h>
|
|
#include <asm/sibyte/sb1250_dma.h>
|
|
|
|
#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
|
|
#define UNIT_INT(n) (K_BCM1480_INT_MAC_0 + ((n) * 2))
|
|
#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
|
|
#define UNIT_INT(n) (K_INT_MAC_0 + (n))
|
|
#else
|
|
#error invalid SiByte MAC configuation
|
|
#endif
|
|
|
|
/**********************************************************************
|
|
* Simple types
|
|
********************************************************************* */
|
|
|
|
|
|
typedef enum { sbmac_speed_auto, sbmac_speed_10,
|
|
sbmac_speed_100, sbmac_speed_1000 } sbmac_speed_t;
|
|
|
|
typedef enum { sbmac_duplex_auto, sbmac_duplex_half,
|
|
sbmac_duplex_full } sbmac_duplex_t;
|
|
|
|
typedef enum { sbmac_fc_auto, sbmac_fc_disabled, sbmac_fc_frame,
|
|
sbmac_fc_collision, sbmac_fc_carrier } sbmac_fc_t;
|
|
|
|
typedef enum { sbmac_state_uninit, sbmac_state_off, sbmac_state_on,
|
|
sbmac_state_broken } sbmac_state_t;
|
|
|
|
|
|
/**********************************************************************
|
|
* Macros
|
|
********************************************************************* */
|
|
|
|
|
|
#define SBDMA_NEXTBUF(d,f) ((((d)->f+1) == (d)->sbdma_dscrtable_end) ? \
|
|
(d)->sbdma_dscrtable : (d)->f+1)
|
|
|
|
|
|
#define NUMCACHEBLKS(x) (((x)+SMP_CACHE_BYTES-1)/SMP_CACHE_BYTES)
|
|
|
|
#define SBMAC_MAX_TXDESCR 32
|
|
#define SBMAC_MAX_RXDESCR 32
|
|
|
|
#define ETHER_ALIGN 2
|
|
#define ETHER_ADDR_LEN 6
|
|
#define ENET_PACKET_SIZE 1518
|
|
/*#define ENET_PACKET_SIZE 9216 */
|
|
|
|
/**********************************************************************
|
|
* DMA Descriptor structure
|
|
********************************************************************* */
|
|
|
|
typedef struct sbdmadscr_s {
|
|
uint64_t dscr_a;
|
|
uint64_t dscr_b;
|
|
} sbdmadscr_t;
|
|
|
|
typedef unsigned long paddr_t;
|
|
|
|
/**********************************************************************
|
|
* DMA Controller structure
|
|
********************************************************************* */
|
|
|
|
typedef struct sbmacdma_s {
|
|
|
|
/*
|
|
* This stuff is used to identify the channel and the registers
|
|
* associated with it.
|
|
*/
|
|
|
|
struct sbmac_softc *sbdma_eth; /* back pointer to associated MAC */
|
|
int sbdma_channel; /* channel number */
|
|
int sbdma_txdir; /* direction (1=transmit) */
|
|
int sbdma_maxdescr; /* total # of descriptors in ring */
|
|
#ifdef CONFIG_SBMAC_COALESCE
|
|
int sbdma_int_pktcnt; /* # descriptors rx/tx before interrupt*/
|
|
int sbdma_int_timeout; /* # usec rx/tx interrupt */
|
|
#endif
|
|
|
|
volatile void __iomem *sbdma_config0; /* DMA config register 0 */
|
|
volatile void __iomem *sbdma_config1; /* DMA config register 1 */
|
|
volatile void __iomem *sbdma_dscrbase; /* Descriptor base address */
|
|
volatile void __iomem *sbdma_dscrcnt; /* Descriptor count register */
|
|
volatile void __iomem *sbdma_curdscr; /* current descriptor address */
|
|
|
|
/*
|
|
* This stuff is for maintenance of the ring
|
|
*/
|
|
|
|
sbdmadscr_t *sbdma_dscrtable; /* base of descriptor table */
|
|
sbdmadscr_t *sbdma_dscrtable_end; /* end of descriptor table */
|
|
|
|
struct sk_buff **sbdma_ctxtable; /* context table, one per descr */
|
|
|
|
paddr_t sbdma_dscrtable_phys; /* and also the phys addr */
|
|
sbdmadscr_t *sbdma_addptr; /* next dscr for sw to add */
|
|
sbdmadscr_t *sbdma_remptr; /* next dscr for sw to remove */
|
|
} sbmacdma_t;
|
|
|
|
|
|
/**********************************************************************
|
|
* Ethernet softc structure
|
|
********************************************************************* */
|
|
|
|
struct sbmac_softc {
|
|
|
|
/*
|
|
* Linux-specific things
|
|
*/
|
|
|
|
struct net_device *sbm_dev; /* pointer to linux device */
|
|
spinlock_t sbm_lock; /* spin lock */
|
|
struct timer_list sbm_timer; /* for monitoring MII */
|
|
struct net_device_stats sbm_stats;
|
|
int sbm_devflags; /* current device flags */
|
|
|
|
int sbm_phy_oldbmsr;
|
|
int sbm_phy_oldanlpar;
|
|
int sbm_phy_oldk1stsr;
|
|
int sbm_phy_oldlinkstat;
|
|
int sbm_buffersize;
|
|
|
|
unsigned char sbm_phys[2];
|
|
|
|
/*
|
|
* Controller-specific things
|
|
*/
|
|
|
|
volatile void __iomem *sbm_base; /* MAC's base address */
|
|
sbmac_state_t sbm_state; /* current state */
|
|
|
|
volatile void __iomem *sbm_macenable; /* MAC Enable Register */
|
|
volatile void __iomem *sbm_maccfg; /* MAC Configuration Register */
|
|
volatile void __iomem *sbm_fifocfg; /* FIFO configuration register */
|
|
volatile void __iomem *sbm_framecfg; /* Frame configuration register */
|
|
volatile void __iomem *sbm_rxfilter; /* receive filter register */
|
|
volatile void __iomem *sbm_isr; /* Interrupt status register */
|
|
volatile void __iomem *sbm_imr; /* Interrupt mask register */
|
|
volatile void __iomem *sbm_mdio; /* MDIO register */
|
|
|
|
sbmac_speed_t sbm_speed; /* current speed */
|
|
sbmac_duplex_t sbm_duplex; /* current duplex */
|
|
sbmac_fc_t sbm_fc; /* current flow control setting */
|
|
|
|
unsigned char sbm_hwaddr[ETHER_ADDR_LEN];
|
|
|
|
sbmacdma_t sbm_txdma; /* for now, only use channel 0 */
|
|
sbmacdma_t sbm_rxdma;
|
|
int rx_hw_checksum;
|
|
int sbe_idx;
|
|
};
|
|
|
|
|
|
/**********************************************************************
|
|
* Externs
|
|
********************************************************************* */
|
|
|
|
/**********************************************************************
|
|
* Prototypes
|
|
********************************************************************* */
|
|
|
|
static void sbdma_initctx(sbmacdma_t *d,
|
|
struct sbmac_softc *s,
|
|
int chan,
|
|
int txrx,
|
|
int maxdescr);
|
|
static void sbdma_channel_start(sbmacdma_t *d, int rxtx);
|
|
static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *m);
|
|
static int sbdma_add_txbuffer(sbmacdma_t *d,struct sk_buff *m);
|
|
static void sbdma_emptyring(sbmacdma_t *d);
|
|
static void sbdma_fillring(sbmacdma_t *d);
|
|
static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d);
|
|
static void sbdma_tx_process(struct sbmac_softc *sc,sbmacdma_t *d);
|
|
static int sbmac_initctx(struct sbmac_softc *s);
|
|
static void sbmac_channel_start(struct sbmac_softc *s);
|
|
static void sbmac_channel_stop(struct sbmac_softc *s);
|
|
static sbmac_state_t sbmac_set_channel_state(struct sbmac_softc *,sbmac_state_t);
|
|
static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff);
|
|
static uint64_t sbmac_addr2reg(unsigned char *ptr);
|
|
static irqreturn_t sbmac_intr(int irq,void *dev_instance);
|
|
static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev);
|
|
static void sbmac_setmulti(struct sbmac_softc *sc);
|
|
static int sbmac_init(struct net_device *dev, int idx);
|
|
static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed);
|
|
static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc_t fc);
|
|
|
|
static int sbmac_open(struct net_device *dev);
|
|
static void sbmac_timer(unsigned long data);
|
|
static void sbmac_tx_timeout (struct net_device *dev);
|
|
static struct net_device_stats *sbmac_get_stats(struct net_device *dev);
|
|
static void sbmac_set_rx_mode(struct net_device *dev);
|
|
static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
|
static int sbmac_close(struct net_device *dev);
|
|
static int sbmac_mii_poll(struct sbmac_softc *s,int noisy);
|
|
static int sbmac_mii_probe(struct net_device *dev);
|
|
|
|
static void sbmac_mii_sync(struct sbmac_softc *s);
|
|
static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitcnt);
|
|
static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx);
|
|
static void sbmac_mii_write(struct sbmac_softc *s,int phyaddr,int regidx,
|
|
unsigned int regval);
|
|
|
|
|
|
/**********************************************************************
|
|
* Globals
|
|
********************************************************************* */
|
|
|
|
static uint64_t sbmac_orig_hwaddr[MAX_UNITS];
|
|
|
|
|
|
/**********************************************************************
|
|
* MDIO constants
|
|
********************************************************************* */
|
|
|
|
#define MII_COMMAND_START 0x01
|
|
#define MII_COMMAND_READ 0x02
|
|
#define MII_COMMAND_WRITE 0x01
|
|
#define MII_COMMAND_ACK 0x02
|
|
|
|
#define BMCR_RESET 0x8000
|
|
#define BMCR_LOOPBACK 0x4000
|
|
#define BMCR_SPEED0 0x2000
|
|
#define BMCR_ANENABLE 0x1000
|
|
#define BMCR_POWERDOWN 0x0800
|
|
#define BMCR_ISOLATE 0x0400
|
|
#define BMCR_RESTARTAN 0x0200
|
|
#define BMCR_DUPLEX 0x0100
|
|
#define BMCR_COLTEST 0x0080
|
|
#define BMCR_SPEED1 0x0040
|
|
#define BMCR_SPEED1000 BMCR_SPEED1
|
|
#define BMCR_SPEED100 BMCR_SPEED0
|
|
#define BMCR_SPEED10 0
|
|
|
|
#define BMSR_100BT4 0x8000
|
|
#define BMSR_100BT_FDX 0x4000
|
|
#define BMSR_100BT_HDX 0x2000
|
|
#define BMSR_10BT_FDX 0x1000
|
|
#define BMSR_10BT_HDX 0x0800
|
|
#define BMSR_100BT2_FDX 0x0400
|
|
#define BMSR_100BT2_HDX 0x0200
|
|
#define BMSR_1000BT_XSR 0x0100
|
|
#define BMSR_PRESUP 0x0040
|
|
#define BMSR_ANCOMPLT 0x0020
|
|
#define BMSR_REMFAULT 0x0010
|
|
#define BMSR_AUTONEG 0x0008
|
|
#define BMSR_LINKSTAT 0x0004
|
|
#define BMSR_JABDETECT 0x0002
|
|
#define BMSR_EXTCAPAB 0x0001
|
|
|
|
#define PHYIDR1 0x2000
|
|
#define PHYIDR2 0x5C60
|
|
|
|
#define ANAR_NP 0x8000
|
|
#define ANAR_RF 0x2000
|
|
#define ANAR_ASYPAUSE 0x0800
|
|
#define ANAR_PAUSE 0x0400
|
|
#define ANAR_T4 0x0200
|
|
#define ANAR_TXFD 0x0100
|
|
#define ANAR_TXHD 0x0080
|
|
#define ANAR_10FD 0x0040
|
|
#define ANAR_10HD 0x0020
|
|
#define ANAR_PSB 0x0001
|
|
|
|
#define ANLPAR_NP 0x8000
|
|
#define ANLPAR_ACK 0x4000
|
|
#define ANLPAR_RF 0x2000
|
|
#define ANLPAR_ASYPAUSE 0x0800
|
|
#define ANLPAR_PAUSE 0x0400
|
|
#define ANLPAR_T4 0x0200
|
|
#define ANLPAR_TXFD 0x0100
|
|
#define ANLPAR_TXHD 0x0080
|
|
#define ANLPAR_10FD 0x0040
|
|
#define ANLPAR_10HD 0x0020
|
|
#define ANLPAR_PSB 0x0001 /* 802.3 */
|
|
|
|
#define ANER_PDF 0x0010
|
|
#define ANER_LPNPABLE 0x0008
|
|
#define ANER_NPABLE 0x0004
|
|
#define ANER_PAGERX 0x0002
|
|
#define ANER_LPANABLE 0x0001
|
|
|
|
#define ANNPTR_NP 0x8000
|
|
#define ANNPTR_MP 0x2000
|
|
#define ANNPTR_ACK2 0x1000
|
|
#define ANNPTR_TOGTX 0x0800
|
|
#define ANNPTR_CODE 0x0008
|
|
|
|
#define ANNPRR_NP 0x8000
|
|
#define ANNPRR_MP 0x2000
|
|
#define ANNPRR_ACK3 0x1000
|
|
#define ANNPRR_TOGTX 0x0800
|
|
#define ANNPRR_CODE 0x0008
|
|
|
|
#define K1TCR_TESTMODE 0x0000
|
|
#define K1TCR_MSMCE 0x1000
|
|
#define K1TCR_MSCV 0x0800
|
|
#define K1TCR_RPTR 0x0400
|
|
#define K1TCR_1000BT_FDX 0x200
|
|
#define K1TCR_1000BT_HDX 0x100
|
|
|
|
#define K1STSR_MSMCFLT 0x8000
|
|
#define K1STSR_MSCFGRES 0x4000
|
|
#define K1STSR_LRSTAT 0x2000
|
|
#define K1STSR_RRSTAT 0x1000
|
|
#define K1STSR_LP1KFD 0x0800
|
|
#define K1STSR_LP1KHD 0x0400
|
|
#define K1STSR_LPASMDIR 0x0200
|
|
|
|
#define K1SCR_1KX_FDX 0x8000
|
|
#define K1SCR_1KX_HDX 0x4000
|
|
#define K1SCR_1KT_FDX 0x2000
|
|
#define K1SCR_1KT_HDX 0x1000
|
|
|
|
#define STRAP_PHY1 0x0800
|
|
#define STRAP_NCMODE 0x0400
|
|
#define STRAP_MANMSCFG 0x0200
|
|
#define STRAP_ANENABLE 0x0100
|
|
#define STRAP_MSVAL 0x0080
|
|
#define STRAP_1KHDXADV 0x0010
|
|
#define STRAP_1KFDXADV 0x0008
|
|
#define STRAP_100ADV 0x0004
|
|
#define STRAP_SPEEDSEL 0x0000
|
|
#define STRAP_SPEED100 0x0001
|
|
|
|
#define PHYSUP_SPEED1000 0x10
|
|
#define PHYSUP_SPEED100 0x08
|
|
#define PHYSUP_SPEED10 0x00
|
|
#define PHYSUP_LINKUP 0x04
|
|
#define PHYSUP_FDX 0x02
|
|
|
|
#define MII_BMCR 0x00 /* Basic mode control register (rw) */
|
|
#define MII_BMSR 0x01 /* Basic mode status register (ro) */
|
|
#define MII_PHYIDR1 0x02
|
|
#define MII_PHYIDR2 0x03
|
|
|
|
#define MII_K1STSR 0x0A /* 1K Status Register (ro) */
|
|
#define MII_ANLPAR 0x05 /* Autonegotiation lnk partner abilities (rw) */
|
|
|
|
|
|
#define M_MAC_MDIO_DIR_OUTPUT 0 /* for clarity */
|
|
|
|
#define ENABLE 1
|
|
#define DISABLE 0
|
|
|
|
/**********************************************************************
|
|
* SBMAC_MII_SYNC(s)
|
|
*
|
|
* Synchronize with the MII - send a pattern of bits to the MII
|
|
* that will guarantee that it is ready to accept a command.
|
|
*
|
|
* Input parameters:
|
|
* s - sbmac structure
|
|
*
|
|
* Return value:
|
|
* nothing
|
|
********************************************************************* */
|
|
|
|
static void sbmac_mii_sync(struct sbmac_softc *s)
|
|
{
|
|
int cnt;
|
|
uint64_t bits;
|
|
int mac_mdio_genc;
|
|
|
|
mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC;
|
|
|
|
bits = M_MAC_MDIO_DIR_OUTPUT | M_MAC_MDIO_OUT;
|
|
|
|
__raw_writeq(bits | mac_mdio_genc, s->sbm_mdio);
|
|
|
|
for (cnt = 0; cnt < 32; cnt++) {
|
|
__raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
|
|
__raw_writeq(bits | mac_mdio_genc, s->sbm_mdio);
|
|
}
|
|
}
|
|
|
|
/**********************************************************************
|
|
* SBMAC_MII_SENDDATA(s,data,bitcnt)
|
|
*
|
|
* Send some bits to the MII. The bits to be sent are right-
|
|
* justified in the 'data' parameter.
|
|
*
|
|
* Input parameters:
|
|
* s - sbmac structure
|
|
* data - data to send
|
|
* bitcnt - number of bits to send
|
|
********************************************************************* */
|
|
|
|
static void sbmac_mii_senddata(struct sbmac_softc *s,unsigned int data, int bitcnt)
|
|
{
|
|
int i;
|
|
uint64_t bits;
|
|
unsigned int curmask;
|
|
int mac_mdio_genc;
|
|
|
|
mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC;
|
|
|
|
bits = M_MAC_MDIO_DIR_OUTPUT;
|
|
__raw_writeq(bits | mac_mdio_genc, s->sbm_mdio);
|
|
|
|
curmask = 1 << (bitcnt - 1);
|
|
|
|
for (i = 0; i < bitcnt; i++) {
|
|
if (data & curmask)
|
|
bits |= M_MAC_MDIO_OUT;
|
|
else bits &= ~M_MAC_MDIO_OUT;
|
|
__raw_writeq(bits | mac_mdio_genc, s->sbm_mdio);
|
|
__raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
|
|
__raw_writeq(bits | mac_mdio_genc, s->sbm_mdio);
|
|
curmask >>= 1;
|
|
}
|
|
}
|
|
|
|
|
|
|
|
/**********************************************************************
|
|
* SBMAC_MII_READ(s,phyaddr,regidx)
|
|
*
|
|
* Read a PHY register.
|
|
*
|
|
* Input parameters:
|
|
* s - sbmac structure
|
|
* phyaddr - PHY's address
|
|
* regidx = index of register to read
|
|
*
|
|
* Return value:
|
|
* value read, or 0 if an error occurred.
|
|
********************************************************************* */
|
|
|
|
static unsigned int sbmac_mii_read(struct sbmac_softc *s,int phyaddr,int regidx)
|
|
{
|
|
int idx;
|
|
int error;
|
|
int regval;
|
|
int mac_mdio_genc;
|
|
|
|
/*
|
|
* Synchronize ourselves so that the PHY knows the next
|
|
* thing coming down is a command
|
|
*/
|
|
|
|
sbmac_mii_sync(s);
|
|
|
|
/*
|
|
* Send the data to the PHY. The sequence is
|
|
* a "start" command (2 bits)
|
|
* a "read" command (2 bits)
|
|
* the PHY addr (5 bits)
|
|
* the register index (5 bits)
|
|
*/
|
|
|
|
sbmac_mii_senddata(s,MII_COMMAND_START, 2);
|
|
sbmac_mii_senddata(s,MII_COMMAND_READ, 2);
|
|
sbmac_mii_senddata(s,phyaddr, 5);
|
|
sbmac_mii_senddata(s,regidx, 5);
|
|
|
|
mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC;
|
|
|
|
/*
|
|
* Switch the port around without a clock transition.
|
|
*/
|
|
__raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio);
|
|
|
|
/*
|
|
* Send out a clock pulse to signal we want the status
|
|
*/
|
|
|
|
__raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
|
|
__raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio);
|
|
|
|
/*
|
|
* If an error occurred, the PHY will signal '1' back
|
|
*/
|
|
error = __raw_readq(s->sbm_mdio) & M_MAC_MDIO_IN;
|
|
|
|
/*
|
|
* Issue an 'idle' clock pulse, but keep the direction
|
|
* the same.
|
|
*/
|
|
__raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
|
|
__raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio);
|
|
|
|
regval = 0;
|
|
|
|
for (idx = 0; idx < 16; idx++) {
|
|
regval <<= 1;
|
|
|
|
if (error == 0) {
|
|
if (__raw_readq(s->sbm_mdio) & M_MAC_MDIO_IN)
|
|
regval |= 1;
|
|
}
|
|
|
|
__raw_writeq(M_MAC_MDIO_DIR_INPUT|M_MAC_MDC | mac_mdio_genc, s->sbm_mdio);
|
|
__raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, s->sbm_mdio);
|
|
}
|
|
|
|
/* Switch back to output */
|
|
__raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, s->sbm_mdio);
|
|
|
|
if (error == 0)
|
|
return regval;
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
* SBMAC_MII_WRITE(s,phyaddr,regidx,regval)
|
|
*
|
|
* Write a value to a PHY register.
|
|
*
|
|
* Input parameters:
|
|
* s - sbmac structure
|
|
* phyaddr - PHY to use
|
|
* regidx - register within the PHY
|
|
* regval - data to write to register
|
|
*
|
|
* Return value:
|
|
* nothing
|
|
********************************************************************* */
|
|
|
|
static void sbmac_mii_write(struct sbmac_softc *s,int phyaddr,int regidx,
|
|
unsigned int regval)
|
|
{
|
|
int mac_mdio_genc;
|
|
|
|
sbmac_mii_sync(s);
|
|
|
|
sbmac_mii_senddata(s,MII_COMMAND_START,2);
|
|
sbmac_mii_senddata(s,MII_COMMAND_WRITE,2);
|
|
sbmac_mii_senddata(s,phyaddr, 5);
|
|
sbmac_mii_senddata(s,regidx, 5);
|
|
sbmac_mii_senddata(s,MII_COMMAND_ACK,2);
|
|
sbmac_mii_senddata(s,regval,16);
|
|
|
|
mac_mdio_genc = __raw_readq(s->sbm_mdio) & M_MAC_GENC;
|
|
|
|
__raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, s->sbm_mdio);
|
|
}
|
|
|
|
|
|
|
|
/**********************************************************************
|
|
* SBDMA_INITCTX(d,s,chan,txrx,maxdescr)
|
|
*
|
|
* Initialize a DMA channel context. Since there are potentially
|
|
* eight DMA channels per MAC, it's nice to do this in a standard
|
|
* way.
|
|
*
|
|
* Input parameters:
|
|
* d - sbmacdma_t structure (DMA channel context)
|
|
* s - sbmac_softc structure (pointer to a MAC)
|
|
* chan - channel number (0..1 right now)
|
|
* txrx - Identifies DMA_TX or DMA_RX for channel direction
|
|
* maxdescr - number of descriptors
|
|
*
|
|
* Return value:
|
|
* nothing
|
|
********************************************************************* */
|
|
|
|
static void sbdma_initctx(sbmacdma_t *d,
|
|
struct sbmac_softc *s,
|
|
int chan,
|
|
int txrx,
|
|
int maxdescr)
|
|
{
|
|
/*
|
|
* Save away interesting stuff in the structure
|
|
*/
|
|
|
|
d->sbdma_eth = s;
|
|
d->sbdma_channel = chan;
|
|
d->sbdma_txdir = txrx;
|
|
|
|
#if 0
|
|
/* RMON clearing */
|
|
s->sbe_idx =(s->sbm_base - A_MAC_BASE_0)/MAC_SPACING;
|
|
#endif
|
|
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BYTES)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_COLLISIONS)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_LATE_COL)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_EX_COL)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_FCS_ERROR)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_ABORT)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_BAD)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_GOOD)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_RUNT)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_TX_OVERSIZE)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BYTES)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_MCAST)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BCAST)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_BAD)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_GOOD)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_RUNT)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_OVERSIZE)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_FCS_ERROR)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_LENGTH_ERROR)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_CODE_ERROR)));
|
|
__raw_writeq(0, IOADDR(A_MAC_REGISTER(s->sbe_idx, R_MAC_RMON_RX_ALIGN_ERROR)));
|
|
|
|
/*
|
|
* initialize register pointers
|
|
*/
|
|
|
|
d->sbdma_config0 =
|
|
s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG0);
|
|
d->sbdma_config1 =
|
|
s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG1);
|
|
d->sbdma_dscrbase =
|
|
s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_BASE);
|
|
d->sbdma_dscrcnt =
|
|
s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_CNT);
|
|
d->sbdma_curdscr =
|
|
s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CUR_DSCRADDR);
|
|
|
|
/*
|
|
* Allocate memory for the ring
|
|
*/
|
|
|
|
d->sbdma_maxdescr = maxdescr;
|
|
|
|
d->sbdma_dscrtable = (sbdmadscr_t *)
|
|
kmalloc((d->sbdma_maxdescr+1)*sizeof(sbdmadscr_t), GFP_KERNEL);
|
|
|
|
/*
|
|
* The descriptor table must be aligned to at least 16 bytes or the
|
|
* MAC will corrupt it.
|
|
*/
|
|
d->sbdma_dscrtable = (sbdmadscr_t *)
|
|
ALIGN((unsigned long)d->sbdma_dscrtable, sizeof(sbdmadscr_t));
|
|
|
|
memset(d->sbdma_dscrtable,0,d->sbdma_maxdescr*sizeof(sbdmadscr_t));
|
|
|
|
d->sbdma_dscrtable_end = d->sbdma_dscrtable + d->sbdma_maxdescr;
|
|
|
|
d->sbdma_dscrtable_phys = virt_to_phys(d->sbdma_dscrtable);
|
|
|
|
/*
|
|
* And context table
|
|
*/
|
|
|
|
d->sbdma_ctxtable = (struct sk_buff **)
|
|
kmalloc(d->sbdma_maxdescr*sizeof(struct sk_buff *), GFP_KERNEL);
|
|
|
|
memset(d->sbdma_ctxtable,0,d->sbdma_maxdescr*sizeof(struct sk_buff *));
|
|
|
|
#ifdef CONFIG_SBMAC_COALESCE
|
|
/*
|
|
* Setup Rx/Tx DMA coalescing defaults
|
|
*/
|
|
|
|
if ( int_pktcnt ) {
|
|
d->sbdma_int_pktcnt = int_pktcnt;
|
|
} else {
|
|
d->sbdma_int_pktcnt = 1;
|
|
}
|
|
|
|
if ( int_timeout ) {
|
|
d->sbdma_int_timeout = int_timeout;
|
|
} else {
|
|
d->sbdma_int_timeout = 0;
|
|
}
|
|
#endif
|
|
|
|
}
|
|
|
|
/**********************************************************************
|
|
* SBDMA_CHANNEL_START(d)
|
|
*
|
|
* Initialize the hardware registers for a DMA channel.
|
|
*
|
|
* Input parameters:
|
|
* d - DMA channel to init (context must be previously init'd
|
|
* rxtx - DMA_RX or DMA_TX depending on what type of channel
|
|
*
|
|
* Return value:
|
|
* nothing
|
|
********************************************************************* */
|
|
|
|
static void sbdma_channel_start(sbmacdma_t *d, int rxtx )
|
|
{
|
|
/*
|
|
* Turn on the DMA channel
|
|
*/
|
|
|
|
#ifdef CONFIG_SBMAC_COALESCE
|
|
__raw_writeq(V_DMA_INT_TIMEOUT(d->sbdma_int_timeout) |
|
|
0, d->sbdma_config1);
|
|
__raw_writeq(M_DMA_EOP_INT_EN |
|
|
V_DMA_RINGSZ(d->sbdma_maxdescr) |
|
|
V_DMA_INT_PKTCNT(d->sbdma_int_pktcnt) |
|
|
0, d->sbdma_config0);
|
|
#else
|
|
__raw_writeq(0, d->sbdma_config1);
|
|
__raw_writeq(V_DMA_RINGSZ(d->sbdma_maxdescr) |
|
|
0, d->sbdma_config0);
|
|
#endif
|
|
|
|
__raw_writeq(d->sbdma_dscrtable_phys, d->sbdma_dscrbase);
|
|
|
|
/*
|
|
* Initialize ring pointers
|
|
*/
|
|
|
|
d->sbdma_addptr = d->sbdma_dscrtable;
|
|
d->sbdma_remptr = d->sbdma_dscrtable;
|
|
}
|
|
|
|
/**********************************************************************
|
|
* SBDMA_CHANNEL_STOP(d)
|
|
*
|
|
* Initialize the hardware registers for a DMA channel.
|
|
*
|
|
* Input parameters:
|
|
* d - DMA channel to init (context must be previously init'd
|
|
*
|
|
* Return value:
|
|
* nothing
|
|
********************************************************************* */
|
|
|
|
static void sbdma_channel_stop(sbmacdma_t *d)
|
|
{
|
|
/*
|
|
* Turn off the DMA channel
|
|
*/
|
|
|
|
__raw_writeq(0, d->sbdma_config1);
|
|
|
|
__raw_writeq(0, d->sbdma_dscrbase);
|
|
|
|
__raw_writeq(0, d->sbdma_config0);
|
|
|
|
/*
|
|
* Zero ring pointers
|
|
*/
|
|
|
|
d->sbdma_addptr = NULL;
|
|
d->sbdma_remptr = NULL;
|
|
}
|
|
|
|
static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset)
|
|
{
|
|
unsigned long addr;
|
|
unsigned long newaddr;
|
|
|
|
addr = (unsigned long) skb->data;
|
|
|
|
newaddr = (addr + power2 - 1) & ~(power2 - 1);
|
|
|
|
skb_reserve(skb,newaddr-addr+offset);
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
* SBDMA_ADD_RCVBUFFER(d,sb)
|
|
*
|
|
* Add a buffer to the specified DMA channel. For receive channels,
|
|
* this queues a buffer for inbound packets.
|
|
*
|
|
* Input parameters:
|
|
* d - DMA channel descriptor
|
|
* sb - sk_buff to add, or NULL if we should allocate one
|
|
*
|
|
* Return value:
|
|
* 0 if buffer could not be added (ring is full)
|
|
* 1 if buffer added successfully
|
|
********************************************************************* */
|
|
|
|
|
|
static int sbdma_add_rcvbuffer(sbmacdma_t *d,struct sk_buff *sb)
|
|
{
|
|
sbdmadscr_t *dsc;
|
|
sbdmadscr_t *nextdsc;
|
|
struct sk_buff *sb_new = NULL;
|
|
int pktsize = ENET_PACKET_SIZE;
|
|
|
|
/* get pointer to our current place in the ring */
|
|
|
|
dsc = d->sbdma_addptr;
|
|
nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr);
|
|
|
|
/*
|
|
* figure out if the ring is full - if the next descriptor
|
|
* is the same as the one that we're going to remove from
|
|
* the ring, the ring is full
|
|
*/
|
|
|
|
if (nextdsc == d->sbdma_remptr) {
|
|
return -ENOSPC;
|
|
}
|
|
|
|
/*
|
|
* Allocate a sk_buff if we don't already have one.
|
|
* If we do have an sk_buff, reset it so that it's empty.
|
|
*
|
|
* Note: sk_buffs don't seem to be guaranteed to have any sort
|
|
* of alignment when they are allocated. Therefore, allocate enough
|
|
* extra space to make sure that:
|
|
*
|
|
* 1. the data does not start in the middle of a cache line.
|
|
* 2. The data does not end in the middle of a cache line
|
|
* 3. The buffer can be aligned such that the IP addresses are
|
|
* naturally aligned.
|
|
*
|
|
* Remember, the SOCs MAC writes whole cache lines at a time,
|
|
* without reading the old contents first. So, if the sk_buff's
|
|
* data portion starts in the middle of a cache line, the SOC
|
|
* DMA will trash the beginning (and ending) portions.
|
|
*/
|
|
|
|
if (sb == NULL) {
|
|
sb_new = dev_alloc_skb(ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN);
|
|
if (sb_new == NULL) {
|
|
printk(KERN_INFO "%s: sk_buff allocation failed\n",
|
|
d->sbdma_eth->sbm_dev->name);
|
|
return -ENOBUFS;
|
|
}
|
|
|
|
sbdma_align_skb(sb_new, SMP_CACHE_BYTES, ETHER_ALIGN);
|
|
|
|
/* mark skbuff owned by our device */
|
|
sb_new->dev = d->sbdma_eth->sbm_dev;
|
|
}
|
|
else {
|
|
sb_new = sb;
|
|
/*
|
|
* nothing special to reinit buffer, it's already aligned
|
|
* and sb->data already points to a good place.
|
|
*/
|
|
}
|
|
|
|
/*
|
|
* fill in the descriptor
|
|
*/
|
|
|
|
#ifdef CONFIG_SBMAC_COALESCE
|
|
/*
|
|
* Do not interrupt per DMA transfer.
|
|
*/
|
|
dsc->dscr_a = virt_to_phys(sb_new->data) |
|
|
V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) | 0;
|
|
#else
|
|
dsc->dscr_a = virt_to_phys(sb_new->data) |
|
|
V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) |
|
|
M_DMA_DSCRA_INTERRUPT;
|
|
#endif
|
|
|
|
/* receiving: no options */
|
|
dsc->dscr_b = 0;
|
|
|
|
/*
|
|
* fill in the context
|
|
*/
|
|
|
|
d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb_new;
|
|
|
|
/*
|
|
* point at next packet
|
|
*/
|
|
|
|
d->sbdma_addptr = nextdsc;
|
|
|
|
/*
|
|
* Give the buffer to the DMA engine.
|
|
*/
|
|
|
|
__raw_writeq(1, d->sbdma_dscrcnt);
|
|
|
|
return 0; /* we did it */
|
|
}
|
|
|
|
/**********************************************************************
|
|
* SBDMA_ADD_TXBUFFER(d,sb)
|
|
*
|
|
* Add a transmit buffer to the specified DMA channel, causing a
|
|
* transmit to start.
|
|
*
|
|
* Input parameters:
|
|
* d - DMA channel descriptor
|
|
* sb - sk_buff to add
|
|
*
|
|
* Return value:
|
|
* 0 transmit queued successfully
|
|
* otherwise error code
|
|
********************************************************************* */
|
|
|
|
|
|
static int sbdma_add_txbuffer(sbmacdma_t *d,struct sk_buff *sb)
|
|
{
|
|
sbdmadscr_t *dsc;
|
|
sbdmadscr_t *nextdsc;
|
|
uint64_t phys;
|
|
uint64_t ncb;
|
|
int length;
|
|
|
|
/* get pointer to our current place in the ring */
|
|
|
|
dsc = d->sbdma_addptr;
|
|
nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr);
|
|
|
|
/*
|
|
* figure out if the ring is full - if the next descriptor
|
|
* is the same as the one that we're going to remove from
|
|
* the ring, the ring is full
|
|
*/
|
|
|
|
if (nextdsc == d->sbdma_remptr) {
|
|
return -ENOSPC;
|
|
}
|
|
|
|
/*
|
|
* Under Linux, it's not necessary to copy/coalesce buffers
|
|
* like it is on NetBSD. We think they're all contiguous,
|
|
* but that may not be true for GBE.
|
|
*/
|
|
|
|
length = sb->len;
|
|
|
|
/*
|
|
* fill in the descriptor. Note that the number of cache
|
|
* blocks in the descriptor is the number of blocks
|
|
* *spanned*, so we need to add in the offset (if any)
|
|
* while doing the calculation.
|
|
*/
|
|
|
|
phys = virt_to_phys(sb->data);
|
|
ncb = NUMCACHEBLKS(length+(phys & (SMP_CACHE_BYTES - 1)));
|
|
|
|
dsc->dscr_a = phys |
|
|
V_DMA_DSCRA_A_SIZE(ncb) |
|
|
#ifndef CONFIG_SBMAC_COALESCE
|
|
M_DMA_DSCRA_INTERRUPT |
|
|
#endif
|
|
M_DMA_ETHTX_SOP;
|
|
|
|
/* transmitting: set outbound options and length */
|
|
|
|
dsc->dscr_b = V_DMA_DSCRB_OPTIONS(K_DMA_ETHTX_APPENDCRC_APPENDPAD) |
|
|
V_DMA_DSCRB_PKT_SIZE(length);
|
|
|
|
/*
|
|
* fill in the context
|
|
*/
|
|
|
|
d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb;
|
|
|
|
/*
|
|
* point at next packet
|
|
*/
|
|
|
|
d->sbdma_addptr = nextdsc;
|
|
|
|
/*
|
|
* Give the buffer to the DMA engine.
|
|
*/
|
|
|
|
__raw_writeq(1, d->sbdma_dscrcnt);
|
|
|
|
return 0; /* we did it */
|
|
}
|
|
|
|
|
|
|
|
|
|
/**********************************************************************
|
|
* SBDMA_EMPTYRING(d)
|
|
*
|
|
* Free all allocated sk_buffs on the specified DMA channel;
|
|
*
|
|
* Input parameters:
|
|
* d - DMA channel
|
|
*
|
|
* Return value:
|
|
* nothing
|
|
********************************************************************* */
|
|
|
|
static void sbdma_emptyring(sbmacdma_t *d)
|
|
{
|
|
int idx;
|
|
struct sk_buff *sb;
|
|
|
|
for (idx = 0; idx < d->sbdma_maxdescr; idx++) {
|
|
sb = d->sbdma_ctxtable[idx];
|
|
if (sb) {
|
|
dev_kfree_skb(sb);
|
|
d->sbdma_ctxtable[idx] = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
* SBDMA_FILLRING(d)
|
|
*
|
|
* Fill the specified DMA channel (must be receive channel)
|
|
* with sk_buffs
|
|
*
|
|
* Input parameters:
|
|
* d - DMA channel
|
|
*
|
|
* Return value:
|
|
* nothing
|
|
********************************************************************* */
|
|
|
|
static void sbdma_fillring(sbmacdma_t *d)
|
|
{
|
|
int idx;
|
|
|
|
for (idx = 0; idx < SBMAC_MAX_RXDESCR-1; idx++) {
|
|
if (sbdma_add_rcvbuffer(d,NULL) != 0)
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
* SBDMA_RX_PROCESS(sc,d)
|
|
*
|
|
* Process "completed" receive buffers on the specified DMA channel.
|
|
* Note that this isn't really ideal for priority channels, since
|
|
* it processes all of the packets on a given channel before
|
|
* returning.
|
|
*
|
|
* Input parameters:
|
|
* sc - softc structure
|
|
* d - DMA channel context
|
|
*
|
|
* Return value:
|
|
* nothing
|
|
********************************************************************* */
|
|
|
|
static void sbdma_rx_process(struct sbmac_softc *sc,sbmacdma_t *d)
|
|
{
|
|
int curidx;
|
|
int hwidx;
|
|
sbdmadscr_t *dsc;
|
|
struct sk_buff *sb;
|
|
int len;
|
|
|
|
for (;;) {
|
|
/*
|
|
* figure out where we are (as an index) and where
|
|
* the hardware is (also as an index)
|
|
*
|
|
* This could be done faster if (for example) the
|
|
* descriptor table was page-aligned and contiguous in
|
|
* both virtual and physical memory -- you could then
|
|
* just compare the low-order bits of the virtual address
|
|
* (sbdma_remptr) and the physical address (sbdma_curdscr CSR)
|
|
*/
|
|
|
|
curidx = d->sbdma_remptr - d->sbdma_dscrtable;
|
|
hwidx = (int) (((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) -
|
|
d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t));
|
|
|
|
/*
|
|
* If they're the same, that means we've processed all
|
|
* of the descriptors up to (but not including) the one that
|
|
* the hardware is working on right now.
|
|
*/
|
|
|
|
if (curidx == hwidx)
|
|
break;
|
|
|
|
/*
|
|
* Otherwise, get the packet's sk_buff ptr back
|
|
*/
|
|
|
|
dsc = &(d->sbdma_dscrtable[curidx]);
|
|
sb = d->sbdma_ctxtable[curidx];
|
|
d->sbdma_ctxtable[curidx] = NULL;
|
|
|
|
len = (int)G_DMA_DSCRB_PKT_SIZE(dsc->dscr_b) - 4;
|
|
|
|
/*
|
|
* Check packet status. If good, process it.
|
|
* If not, silently drop it and put it back on the
|
|
* receive ring.
|
|
*/
|
|
|
|
if (!(dsc->dscr_a & M_DMA_ETHRX_BAD)) {
|
|
|
|
/*
|
|
* Add a new buffer to replace the old one. If we fail
|
|
* to allocate a buffer, we're going to drop this
|
|
* packet and put it right back on the receive ring.
|
|
*/
|
|
|
|
if (sbdma_add_rcvbuffer(d,NULL) == -ENOBUFS) {
|
|
sc->sbm_stats.rx_dropped++;
|
|
sbdma_add_rcvbuffer(d,sb); /* re-add old buffer */
|
|
} else {
|
|
/*
|
|
* Set length into the packet
|
|
*/
|
|
skb_put(sb,len);
|
|
|
|
/*
|
|
* Buffer has been replaced on the
|
|
* receive ring. Pass the buffer to
|
|
* the kernel
|
|
*/
|
|
sc->sbm_stats.rx_bytes += len;
|
|
sc->sbm_stats.rx_packets++;
|
|
sb->protocol = eth_type_trans(sb,d->sbdma_eth->sbm_dev);
|
|
/* Check hw IPv4/TCP checksum if supported */
|
|
if (sc->rx_hw_checksum == ENABLE) {
|
|
if (!((dsc->dscr_a) & M_DMA_ETHRX_BADIP4CS) &&
|
|
!((dsc->dscr_a) & M_DMA_ETHRX_BADTCPCS)) {
|
|
sb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
/* don't need to set sb->csum */
|
|
} else {
|
|
sb->ip_summed = CHECKSUM_NONE;
|
|
}
|
|
}
|
|
|
|
netif_rx(sb);
|
|
}
|
|
} else {
|
|
/*
|
|
* Packet was mangled somehow. Just drop it and
|
|
* put it back on the receive ring.
|
|
*/
|
|
sc->sbm_stats.rx_errors++;
|
|
sbdma_add_rcvbuffer(d,sb);
|
|
}
|
|
|
|
|
|
/*
|
|
* .. and advance to the next buffer.
|
|
*/
|
|
|
|
d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
|
|
|
|
}
|
|
}
|
|
|
|
|
|
|
|
/**********************************************************************
|
|
* SBDMA_TX_PROCESS(sc,d)
|
|
*
|
|
* Process "completed" transmit buffers on the specified DMA channel.
|
|
* This is normally called within the interrupt service routine.
|
|
* Note that this isn't really ideal for priority channels, since
|
|
* it processes all of the packets on a given channel before
|
|
* returning.
|
|
*
|
|
* Input parameters:
|
|
* sc - softc structure
|
|
* d - DMA channel context
|
|
*
|
|
* Return value:
|
|
* nothing
|
|
********************************************************************* */
|
|
|
|
static void sbdma_tx_process(struct sbmac_softc *sc,sbmacdma_t *d)
|
|
{
|
|
int curidx;
|
|
int hwidx;
|
|
sbdmadscr_t *dsc;
|
|
struct sk_buff *sb;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&(sc->sbm_lock), flags);
|
|
|
|
for (;;) {
|
|
/*
|
|
* figure out where we are (as an index) and where
|
|
* the hardware is (also as an index)
|
|
*
|
|
* This could be done faster if (for example) the
|
|
* descriptor table was page-aligned and contiguous in
|
|
* both virtual and physical memory -- you could then
|
|
* just compare the low-order bits of the virtual address
|
|
* (sbdma_remptr) and the physical address (sbdma_curdscr CSR)
|
|
*/
|
|
|
|
curidx = d->sbdma_remptr - d->sbdma_dscrtable;
|
|
hwidx = (int) (((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) -
|
|
d->sbdma_dscrtable_phys) / sizeof(sbdmadscr_t));
|
|
|
|
/*
|
|
* If they're the same, that means we've processed all
|
|
* of the descriptors up to (but not including) the one that
|
|
* the hardware is working on right now.
|
|
*/
|
|
|
|
if (curidx == hwidx)
|
|
break;
|
|
|
|
/*
|
|
* Otherwise, get the packet's sk_buff ptr back
|
|
*/
|
|
|
|
dsc = &(d->sbdma_dscrtable[curidx]);
|
|
sb = d->sbdma_ctxtable[curidx];
|
|
d->sbdma_ctxtable[curidx] = NULL;
|
|
|
|
/*
|
|
* Stats
|
|
*/
|
|
|
|
sc->sbm_stats.tx_bytes += sb->len;
|
|
sc->sbm_stats.tx_packets++;
|
|
|
|
/*
|
|
* for transmits, we just free buffers.
|
|
*/
|
|
|
|
dev_kfree_skb_irq(sb);
|
|
|
|
/*
|
|
* .. and advance to the next buffer.
|
|
*/
|
|
|
|
d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
|
|
|
|
}
|
|
|
|
/*
|
|
* Decide if we should wake up the protocol or not.
|
|
* Other drivers seem to do this when we reach a low
|
|
* watermark on the transmit queue.
|
|
*/
|
|
|
|
netif_wake_queue(d->sbdma_eth->sbm_dev);
|
|
|
|
spin_unlock_irqrestore(&(sc->sbm_lock), flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**********************************************************************
|
|
* SBMAC_INITCTX(s)
|
|
*
|
|
* Initialize an Ethernet context structure - this is called
|
|
* once per MAC on the 1250. Memory is allocated here, so don't
|
|
* call it again from inside the ioctl routines that bring the
|
|
* interface up/down
|
|
*
|
|
* Input parameters:
|
|
* s - sbmac context structure
|
|
*
|
|
* Return value:
|
|
* 0
|
|
********************************************************************* */
|
|
|
|
static int sbmac_initctx(struct sbmac_softc *s)
|
|
{
|
|
|
|
/*
|
|
* figure out the addresses of some ports
|
|
*/
|
|
|
|
s->sbm_macenable = s->sbm_base + R_MAC_ENABLE;
|
|
s->sbm_maccfg = s->sbm_base + R_MAC_CFG;
|
|
s->sbm_fifocfg = s->sbm_base + R_MAC_THRSH_CFG;
|
|
s->sbm_framecfg = s->sbm_base + R_MAC_FRAMECFG;
|
|
s->sbm_rxfilter = s->sbm_base + R_MAC_ADFILTER_CFG;
|
|
s->sbm_isr = s->sbm_base + R_MAC_STATUS;
|
|
s->sbm_imr = s->sbm_base + R_MAC_INT_MASK;
|
|
s->sbm_mdio = s->sbm_base + R_MAC_MDIO;
|
|
|
|
s->sbm_phys[0] = 1;
|
|
s->sbm_phys[1] = 0;
|
|
|
|
s->sbm_phy_oldbmsr = 0;
|
|
s->sbm_phy_oldanlpar = 0;
|
|
s->sbm_phy_oldk1stsr = 0;
|
|
s->sbm_phy_oldlinkstat = 0;
|
|
|
|
/*
|
|
* Initialize the DMA channels. Right now, only one per MAC is used
|
|
* Note: Only do this _once_, as it allocates memory from the kernel!
|
|
*/
|
|
|
|
sbdma_initctx(&(s->sbm_txdma),s,0,DMA_TX,SBMAC_MAX_TXDESCR);
|
|
sbdma_initctx(&(s->sbm_rxdma),s,0,DMA_RX,SBMAC_MAX_RXDESCR);
|
|
|
|
/*
|
|
* initial state is OFF
|
|
*/
|
|
|
|
s->sbm_state = sbmac_state_off;
|
|
|
|
/*
|
|
* Initial speed is (XXX TEMP) 10MBit/s HDX no FC
|
|
*/
|
|
|
|
s->sbm_speed = sbmac_speed_10;
|
|
s->sbm_duplex = sbmac_duplex_half;
|
|
s->sbm_fc = sbmac_fc_disabled;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void sbdma_uninitctx(struct sbmacdma_s *d)
|
|
{
|
|
if (d->sbdma_dscrtable) {
|
|
kfree(d->sbdma_dscrtable);
|
|
d->sbdma_dscrtable = NULL;
|
|
}
|
|
|
|
if (d->sbdma_ctxtable) {
|
|
kfree(d->sbdma_ctxtable);
|
|
d->sbdma_ctxtable = NULL;
|
|
}
|
|
}
|
|
|
|
|
|
static void sbmac_uninitctx(struct sbmac_softc *sc)
|
|
{
|
|
sbdma_uninitctx(&(sc->sbm_txdma));
|
|
sbdma_uninitctx(&(sc->sbm_rxdma));
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
* SBMAC_CHANNEL_START(s)
|
|
*
|
|
* Start packet processing on this MAC.
|
|
*
|
|
* Input parameters:
|
|
* s - sbmac structure
|
|
*
|
|
* Return value:
|
|
* nothing
|
|
********************************************************************* */
|
|
|
|
static void sbmac_channel_start(struct sbmac_softc *s)
|
|
{
|
|
uint64_t reg;
|
|
volatile void __iomem *port;
|
|
uint64_t cfg,fifo,framecfg;
|
|
int idx, th_value;
|
|
|
|
/*
|
|
* Don't do this if running
|
|
*/
|
|
|
|
if (s->sbm_state == sbmac_state_on)
|
|
return;
|
|
|
|
/*
|
|
* Bring the controller out of reset, but leave it off.
|
|
*/
|
|
|
|
__raw_writeq(0, s->sbm_macenable);
|
|
|
|
/*
|
|
* Ignore all received packets
|
|
*/
|
|
|
|
__raw_writeq(0, s->sbm_rxfilter);
|
|
|
|
/*
|
|
* Calculate values for various control registers.
|
|
*/
|
|
|
|
cfg = M_MAC_RETRY_EN |
|
|
M_MAC_TX_HOLD_SOP_EN |
|
|
V_MAC_TX_PAUSE_CNT_16K |
|
|
M_MAC_AP_STAT_EN |
|
|
M_MAC_FAST_SYNC |
|
|
M_MAC_SS_EN |
|
|
0;
|
|
|
|
/*
|
|
* Be sure that RD_THRSH+WR_THRSH <= 32 for pass1 pars
|
|
* and make sure that RD_THRSH + WR_THRSH <=128 for pass2 and above
|
|
* Use a larger RD_THRSH for gigabit
|
|
*/
|
|
if (soc_type == K_SYS_SOC_TYPE_BCM1250 && periph_rev < 2)
|
|
th_value = 28;
|
|
else
|
|
th_value = 64;
|
|
|
|
fifo = V_MAC_TX_WR_THRSH(4) | /* Must be '4' or '8' */
|
|
((s->sbm_speed == sbmac_speed_1000)
|
|
? V_MAC_TX_RD_THRSH(th_value) : V_MAC_TX_RD_THRSH(4)) |
|
|
V_MAC_TX_RL_THRSH(4) |
|
|
V_MAC_RX_PL_THRSH(4) |
|
|
V_MAC_RX_RD_THRSH(4) | /* Must be '4' */
|
|
V_MAC_RX_PL_THRSH(4) |
|
|
V_MAC_RX_RL_THRSH(8) |
|
|
0;
|
|
|
|
framecfg = V_MAC_MIN_FRAMESZ_DEFAULT |
|
|
V_MAC_MAX_FRAMESZ_DEFAULT |
|
|
V_MAC_BACKOFF_SEL(1);
|
|
|
|
/*
|
|
* Clear out the hash address map
|
|
*/
|
|
|
|
port = s->sbm_base + R_MAC_HASH_BASE;
|
|
for (idx = 0; idx < MAC_HASH_COUNT; idx++) {
|
|
__raw_writeq(0, port);
|
|
port += sizeof(uint64_t);
|
|
}
|
|
|
|
/*
|
|
* Clear out the exact-match table
|
|
*/
|
|
|
|
port = s->sbm_base + R_MAC_ADDR_BASE;
|
|
for (idx = 0; idx < MAC_ADDR_COUNT; idx++) {
|
|
__raw_writeq(0, port);
|
|
port += sizeof(uint64_t);
|
|
}
|
|
|
|
/*
|
|
* Clear out the DMA Channel mapping table registers
|
|
*/
|
|
|
|
port = s->sbm_base + R_MAC_CHUP0_BASE;
|
|
for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) {
|
|
__raw_writeq(0, port);
|
|
port += sizeof(uint64_t);
|
|
}
|
|
|
|
|
|
port = s->sbm_base + R_MAC_CHLO0_BASE;
|
|
for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) {
|
|
__raw_writeq(0, port);
|
|
port += sizeof(uint64_t);
|
|
}
|
|
|
|
/*
|
|
* Program the hardware address. It goes into the hardware-address
|
|
* register as well as the first filter register.
|
|
*/
|
|
|
|
reg = sbmac_addr2reg(s->sbm_hwaddr);
|
|
|
|
port = s->sbm_base + R_MAC_ADDR_BASE;
|
|
__raw_writeq(reg, port);
|
|
port = s->sbm_base + R_MAC_ETHERNET_ADDR;
|
|
|
|
#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
|
|
/*
|
|
* Pass1 SOCs do not receive packets addressed to the
|
|
* destination address in the R_MAC_ETHERNET_ADDR register.
|
|
* Set the value to zero.
|
|
*/
|
|
__raw_writeq(0, port);
|
|
#else
|
|
__raw_writeq(reg, port);
|
|
#endif
|
|
|
|
/*
|
|
* Set the receive filter for no packets, and write values
|
|
* to the various config registers
|
|
*/
|
|
|
|
__raw_writeq(0, s->sbm_rxfilter);
|
|
__raw_writeq(0, s->sbm_imr);
|
|
__raw_writeq(framecfg, s->sbm_framecfg);
|
|
__raw_writeq(fifo, s->sbm_fifocfg);
|
|
__raw_writeq(cfg, s->sbm_maccfg);
|
|
|
|
/*
|
|
* Initialize DMA channels (rings should be ok now)
|
|
*/
|
|
|
|
sbdma_channel_start(&(s->sbm_rxdma), DMA_RX);
|
|
sbdma_channel_start(&(s->sbm_txdma), DMA_TX);
|
|
|
|
/*
|
|
* Configure the speed, duplex, and flow control
|
|
*/
|
|
|
|
sbmac_set_speed(s,s->sbm_speed);
|
|
sbmac_set_duplex(s,s->sbm_duplex,s->sbm_fc);
|
|
|
|
/*
|
|
* Fill the receive ring
|
|
*/
|
|
|
|
sbdma_fillring(&(s->sbm_rxdma));
|
|
|
|
/*
|
|
* Turn on the rest of the bits in the enable register
|
|
*/
|
|
|
|
#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
|
|
__raw_writeq(M_MAC_RXDMA_EN0 |
|
|
M_MAC_TXDMA_EN0, s->sbm_macenable);
|
|
#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
|
|
__raw_writeq(M_MAC_RXDMA_EN0 |
|
|
M_MAC_TXDMA_EN0 |
|
|
M_MAC_RX_ENABLE |
|
|
M_MAC_TX_ENABLE, s->sbm_macenable);
|
|
#else
|
|
#error invalid SiByte MAC configuation
|
|
#endif
|
|
|
|
#ifdef CONFIG_SBMAC_COALESCE
|
|
/*
|
|
* Accept any TX interrupt and EOP count/timer RX interrupts on ch 0
|
|
*/
|
|
__raw_writeq(((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) |
|
|
((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0), s->sbm_imr);
|
|
#else
|
|
/*
|
|
* Accept any kind of interrupt on TX and RX DMA channel 0
|
|
*/
|
|
__raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) |
|
|
(M_MAC_INT_CHANNEL << S_MAC_RX_CH0), s->sbm_imr);
|
|
#endif
|
|
|
|
/*
|
|
* Enable receiving unicasts and broadcasts
|
|
*/
|
|
|
|
__raw_writeq(M_MAC_UCAST_EN | M_MAC_BCAST_EN, s->sbm_rxfilter);
|
|
|
|
/*
|
|
* we're running now.
|
|
*/
|
|
|
|
s->sbm_state = sbmac_state_on;
|
|
|
|
/*
|
|
* Program multicast addresses
|
|
*/
|
|
|
|
sbmac_setmulti(s);
|
|
|
|
/*
|
|
* If channel was in promiscuous mode before, turn that on
|
|
*/
|
|
|
|
if (s->sbm_devflags & IFF_PROMISC) {
|
|
sbmac_promiscuous_mode(s,1);
|
|
}
|
|
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
* SBMAC_CHANNEL_STOP(s)
|
|
*
|
|
* Stop packet processing on this MAC.
|
|
*
|
|
* Input parameters:
|
|
* s - sbmac structure
|
|
*
|
|
* Return value:
|
|
* nothing
|
|
********************************************************************* */
|
|
|
|
static void sbmac_channel_stop(struct sbmac_softc *s)
|
|
{
|
|
/* don't do this if already stopped */
|
|
|
|
if (s->sbm_state == sbmac_state_off)
|
|
return;
|
|
|
|
/* don't accept any packets, disable all interrupts */
|
|
|
|
__raw_writeq(0, s->sbm_rxfilter);
|
|
__raw_writeq(0, s->sbm_imr);
|
|
|
|
/* Turn off ticker */
|
|
|
|
/* XXX */
|
|
|
|
/* turn off receiver and transmitter */
|
|
|
|
__raw_writeq(0, s->sbm_macenable);
|
|
|
|
/* We're stopped now. */
|
|
|
|
s->sbm_state = sbmac_state_off;
|
|
|
|
/*
|
|
* Stop DMA channels (rings should be ok now)
|
|
*/
|
|
|
|
sbdma_channel_stop(&(s->sbm_rxdma));
|
|
sbdma_channel_stop(&(s->sbm_txdma));
|
|
|
|
/* Empty the receive and transmit rings */
|
|
|
|
sbdma_emptyring(&(s->sbm_rxdma));
|
|
sbdma_emptyring(&(s->sbm_txdma));
|
|
|
|
}
|
|
|
|
/**********************************************************************
|
|
* SBMAC_SET_CHANNEL_STATE(state)
|
|
*
|
|
* Set the channel's state ON or OFF
|
|
*
|
|
* Input parameters:
|
|
* state - new state
|
|
*
|
|
* Return value:
|
|
* old state
|
|
********************************************************************* */
|
|
static sbmac_state_t sbmac_set_channel_state(struct sbmac_softc *sc,
|
|
sbmac_state_t state)
|
|
{
|
|
sbmac_state_t oldstate = sc->sbm_state;
|
|
|
|
/*
|
|
* If same as previous state, return
|
|
*/
|
|
|
|
if (state == oldstate) {
|
|
return oldstate;
|
|
}
|
|
|
|
/*
|
|
* If new state is ON, turn channel on
|
|
*/
|
|
|
|
if (state == sbmac_state_on) {
|
|
sbmac_channel_start(sc);
|
|
}
|
|
else {
|
|
sbmac_channel_stop(sc);
|
|
}
|
|
|
|
/*
|
|
* Return previous state
|
|
*/
|
|
|
|
return oldstate;
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
* SBMAC_PROMISCUOUS_MODE(sc,onoff)
|
|
*
|
|
* Turn on or off promiscuous mode
|
|
*
|
|
* Input parameters:
|
|
* sc - softc
|
|
* onoff - 1 to turn on, 0 to turn off
|
|
*
|
|
* Return value:
|
|
* nothing
|
|
********************************************************************* */
|
|
|
|
static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff)
|
|
{
|
|
uint64_t reg;
|
|
|
|
if (sc->sbm_state != sbmac_state_on)
|
|
return;
|
|
|
|
if (onoff) {
|
|
reg = __raw_readq(sc->sbm_rxfilter);
|
|
reg |= M_MAC_ALLPKT_EN;
|
|
__raw_writeq(reg, sc->sbm_rxfilter);
|
|
}
|
|
else {
|
|
reg = __raw_readq(sc->sbm_rxfilter);
|
|
reg &= ~M_MAC_ALLPKT_EN;
|
|
__raw_writeq(reg, sc->sbm_rxfilter);
|
|
}
|
|
}
|
|
|
|
/**********************************************************************
|
|
* SBMAC_SETIPHDR_OFFSET(sc,onoff)
|
|
*
|
|
* Set the iphdr offset as 15 assuming ethernet encapsulation
|
|
*
|
|
* Input parameters:
|
|
* sc - softc
|
|
*
|
|
* Return value:
|
|
* nothing
|
|
********************************************************************* */
|
|
|
|
static void sbmac_set_iphdr_offset(struct sbmac_softc *sc)
|
|
{
|
|
uint64_t reg;
|
|
|
|
/* Hard code the off set to 15 for now */
|
|
reg = __raw_readq(sc->sbm_rxfilter);
|
|
reg &= ~M_MAC_IPHDR_OFFSET | V_MAC_IPHDR_OFFSET(15);
|
|
__raw_writeq(reg, sc->sbm_rxfilter);
|
|
|
|
/* BCM1250 pass1 didn't have hardware checksum. Everything
|
|
later does. */
|
|
if (soc_type == K_SYS_SOC_TYPE_BCM1250 && periph_rev < 2) {
|
|
sc->rx_hw_checksum = DISABLE;
|
|
} else {
|
|
sc->rx_hw_checksum = ENABLE;
|
|
}
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
* SBMAC_ADDR2REG(ptr)
|
|
*
|
|
* Convert six bytes into the 64-bit register value that
|
|
* we typically write into the SBMAC's address/mcast registers
|
|
*
|
|
* Input parameters:
|
|
* ptr - pointer to 6 bytes
|
|
*
|
|
* Return value:
|
|
* register value
|
|
********************************************************************* */
|
|
|
|
static uint64_t sbmac_addr2reg(unsigned char *ptr)
|
|
{
|
|
uint64_t reg = 0;
|
|
|
|
ptr += 6;
|
|
|
|
reg |= (uint64_t) *(--ptr);
|
|
reg <<= 8;
|
|
reg |= (uint64_t) *(--ptr);
|
|
reg <<= 8;
|
|
reg |= (uint64_t) *(--ptr);
|
|
reg <<= 8;
|
|
reg |= (uint64_t) *(--ptr);
|
|
reg <<= 8;
|
|
reg |= (uint64_t) *(--ptr);
|
|
reg <<= 8;
|
|
reg |= (uint64_t) *(--ptr);
|
|
|
|
return reg;
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
* SBMAC_SET_SPEED(s,speed)
|
|
*
|
|
* Configure LAN speed for the specified MAC.
|
|
* Warning: must be called when MAC is off!
|
|
*
|
|
* Input parameters:
|
|
* s - sbmac structure
|
|
* speed - speed to set MAC to (see sbmac_speed_t enum)
|
|
*
|
|
* Return value:
|
|
* 1 if successful
|
|
* 0 indicates invalid parameters
|
|
********************************************************************* */
|
|
|
|
static int sbmac_set_speed(struct sbmac_softc *s,sbmac_speed_t speed)
|
|
{
|
|
uint64_t cfg;
|
|
uint64_t framecfg;
|
|
|
|
/*
|
|
* Save new current values
|
|
*/
|
|
|
|
s->sbm_speed = speed;
|
|
|
|
if (s->sbm_state == sbmac_state_on)
|
|
return 0; /* save for next restart */
|
|
|
|
/*
|
|
* Read current register values
|
|
*/
|
|
|
|
cfg = __raw_readq(s->sbm_maccfg);
|
|
framecfg = __raw_readq(s->sbm_framecfg);
|
|
|
|
/*
|
|
* Mask out the stuff we want to change
|
|
*/
|
|
|
|
cfg &= ~(M_MAC_BURST_EN | M_MAC_SPEED_SEL);
|
|
framecfg &= ~(M_MAC_IFG_RX | M_MAC_IFG_TX | M_MAC_IFG_THRSH |
|
|
M_MAC_SLOT_SIZE);
|
|
|
|
/*
|
|
* Now add in the new bits
|
|
*/
|
|
|
|
switch (speed) {
|
|
case sbmac_speed_10:
|
|
framecfg |= V_MAC_IFG_RX_10 |
|
|
V_MAC_IFG_TX_10 |
|
|
K_MAC_IFG_THRSH_10 |
|
|
V_MAC_SLOT_SIZE_10;
|
|
cfg |= V_MAC_SPEED_SEL_10MBPS;
|
|
break;
|
|
|
|
case sbmac_speed_100:
|
|
framecfg |= V_MAC_IFG_RX_100 |
|
|
V_MAC_IFG_TX_100 |
|
|
V_MAC_IFG_THRSH_100 |
|
|
V_MAC_SLOT_SIZE_100;
|
|
cfg |= V_MAC_SPEED_SEL_100MBPS ;
|
|
break;
|
|
|
|
case sbmac_speed_1000:
|
|
framecfg |= V_MAC_IFG_RX_1000 |
|
|
V_MAC_IFG_TX_1000 |
|
|
V_MAC_IFG_THRSH_1000 |
|
|
V_MAC_SLOT_SIZE_1000;
|
|
cfg |= V_MAC_SPEED_SEL_1000MBPS | M_MAC_BURST_EN;
|
|
break;
|
|
|
|
case sbmac_speed_auto: /* XXX not implemented */
|
|
/* fall through */
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Send the bits back to the hardware
|
|
*/
|
|
|
|
__raw_writeq(framecfg, s->sbm_framecfg);
|
|
__raw_writeq(cfg, s->sbm_maccfg);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**********************************************************************
|
|
* SBMAC_SET_DUPLEX(s,duplex,fc)
|
|
*
|
|
* Set Ethernet duplex and flow control options for this MAC
|
|
* Warning: must be called when MAC is off!
|
|
*
|
|
* Input parameters:
|
|
* s - sbmac structure
|
|
* duplex - duplex setting (see sbmac_duplex_t)
|
|
* fc - flow control setting (see sbmac_fc_t)
|
|
*
|
|
* Return value:
|
|
* 1 if ok
|
|
* 0 if an invalid parameter combination was specified
|
|
********************************************************************* */
|
|
|
|
static int sbmac_set_duplex(struct sbmac_softc *s,sbmac_duplex_t duplex,sbmac_fc_t fc)
|
|
{
|
|
uint64_t cfg;
|
|
|
|
/*
|
|
* Save new current values
|
|
*/
|
|
|
|
s->sbm_duplex = duplex;
|
|
s->sbm_fc = fc;
|
|
|
|
if (s->sbm_state == sbmac_state_on)
|
|
return 0; /* save for next restart */
|
|
|
|
/*
|
|
* Read current register values
|
|
*/
|
|
|
|
cfg = __raw_readq(s->sbm_maccfg);
|
|
|
|
/*
|
|
* Mask off the stuff we're about to change
|
|
*/
|
|
|
|
cfg &= ~(M_MAC_FC_SEL | M_MAC_FC_CMD | M_MAC_HDX_EN);
|
|
|
|
|
|
switch (duplex) {
|
|
case sbmac_duplex_half:
|
|
switch (fc) {
|
|
case sbmac_fc_disabled:
|
|
cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_DISABLED;
|
|
break;
|
|
|
|
case sbmac_fc_collision:
|
|
cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENABLED;
|
|
break;
|
|
|
|
case sbmac_fc_carrier:
|
|
cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENAB_FALSECARR;
|
|
break;
|
|
|
|
case sbmac_fc_auto: /* XXX not implemented */
|
|
/* fall through */
|
|
case sbmac_fc_frame: /* not valid in half duplex */
|
|
default: /* invalid selection */
|
|
return 0;
|
|
}
|
|
break;
|
|
|
|
case sbmac_duplex_full:
|
|
switch (fc) {
|
|
case sbmac_fc_disabled:
|
|
cfg |= V_MAC_FC_CMD_DISABLED;
|
|
break;
|
|
|
|
case sbmac_fc_frame:
|
|
cfg |= V_MAC_FC_CMD_ENABLED;
|
|
break;
|
|
|
|
case sbmac_fc_collision: /* not valid in full duplex */
|
|
case sbmac_fc_carrier: /* not valid in full duplex */
|
|
case sbmac_fc_auto: /* XXX not implemented */
|
|
/* fall through */
|
|
default:
|
|
return 0;
|
|
}
|
|
break;
|
|
case sbmac_duplex_auto:
|
|
/* XXX not implemented */
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Send the bits back to the hardware
|
|
*/
|
|
|
|
__raw_writeq(cfg, s->sbm_maccfg);
|
|
|
|
return 1;
|
|
}
|
|
|
|
|
|
|
|
|
|
/**********************************************************************
|
|
* SBMAC_INTR()
|
|
*
|
|
* Interrupt handler for MAC interrupts
|
|
*
|
|
* Input parameters:
|
|
* MAC structure
|
|
*
|
|
* Return value:
|
|
* nothing
|
|
********************************************************************* */
|
|
static irqreturn_t sbmac_intr(int irq,void *dev_instance)
|
|
{
|
|
struct net_device *dev = (struct net_device *) dev_instance;
|
|
struct sbmac_softc *sc = netdev_priv(dev);
|
|
uint64_t isr;
|
|
int handled = 0;
|
|
|
|
for (;;) {
|
|
|
|
/*
|
|
* Read the ISR (this clears the bits in the real
|
|
* register, except for counter addr)
|
|
*/
|
|
|
|
isr = __raw_readq(sc->sbm_isr) & ~M_MAC_COUNTER_ADDR;
|
|
|
|
if (isr == 0)
|
|
break;
|
|
|
|
handled = 1;
|
|
|
|
/*
|
|
* Transmits on channel 0
|
|
*/
|
|
|
|
if (isr & (M_MAC_INT_CHANNEL << S_MAC_TX_CH0)) {
|
|
sbdma_tx_process(sc,&(sc->sbm_txdma));
|
|
}
|
|
|
|
/*
|
|
* Receives on channel 0
|
|
*/
|
|
|
|
/*
|
|
* It's important to test all the bits (or at least the
|
|
* EOP_SEEN bit) when deciding to do the RX process
|
|
* particularly when coalescing, to make sure we
|
|
* take care of the following:
|
|
*
|
|
* If you have some packets waiting (have been received
|
|
* but no interrupt) and get a TX interrupt before
|
|
* the RX timer or counter expires, reading the ISR
|
|
* above will clear the timer and counter, and you
|
|
* won't get another interrupt until a packet shows
|
|
* up to start the timer again. Testing
|
|
* EOP_SEEN here takes care of this case.
|
|
* (EOP_SEEN is part of M_MAC_INT_CHANNEL << S_MAC_RX_CH0)
|
|
*/
|
|
|
|
|
|
if (isr & (M_MAC_INT_CHANNEL << S_MAC_RX_CH0)) {
|
|
sbdma_rx_process(sc,&(sc->sbm_rxdma));
|
|
}
|
|
}
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
* SBMAC_START_TX(skb,dev)
|
|
*
|
|
* Start output on the specified interface. Basically, we
|
|
* queue as many buffers as we can until the ring fills up, or
|
|
* we run off the end of the queue, whichever comes first.
|
|
*
|
|
* Input parameters:
|
|
*
|
|
*
|
|
* Return value:
|
|
* nothing
|
|
********************************************************************* */
|
|
static int sbmac_start_tx(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct sbmac_softc *sc = netdev_priv(dev);
|
|
|
|
/* lock eth irq */
|
|
spin_lock_irq (&sc->sbm_lock);
|
|
|
|
/*
|
|
* Put the buffer on the transmit ring. If we
|
|
* don't have room, stop the queue.
|
|
*/
|
|
|
|
if (sbdma_add_txbuffer(&(sc->sbm_txdma),skb)) {
|
|
/* XXX save skb that we could not send */
|
|
netif_stop_queue(dev);
|
|
spin_unlock_irq(&sc->sbm_lock);
|
|
|
|
return 1;
|
|
}
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
spin_unlock_irq (&sc->sbm_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**********************************************************************
|
|
* SBMAC_SETMULTI(sc)
|
|
*
|
|
* Reprogram the multicast table into the hardware, given
|
|
* the list of multicasts associated with the interface
|
|
* structure.
|
|
*
|
|
* Input parameters:
|
|
* sc - softc
|
|
*
|
|
* Return value:
|
|
* nothing
|
|
********************************************************************* */
|
|
|
|
static void sbmac_setmulti(struct sbmac_softc *sc)
|
|
{
|
|
uint64_t reg;
|
|
volatile void __iomem *port;
|
|
int idx;
|
|
struct dev_mc_list *mclist;
|
|
struct net_device *dev = sc->sbm_dev;
|
|
|
|
/*
|
|
* Clear out entire multicast table. We do this by nuking
|
|
* the entire hash table and all the direct matches except
|
|
* the first one, which is used for our station address
|
|
*/
|
|
|
|
for (idx = 1; idx < MAC_ADDR_COUNT; idx++) {
|
|
port = sc->sbm_base + R_MAC_ADDR_BASE+(idx*sizeof(uint64_t));
|
|
__raw_writeq(0, port);
|
|
}
|
|
|
|
for (idx = 0; idx < MAC_HASH_COUNT; idx++) {
|
|
port = sc->sbm_base + R_MAC_HASH_BASE+(idx*sizeof(uint64_t));
|
|
__raw_writeq(0, port);
|
|
}
|
|
|
|
/*
|
|
* Clear the filter to say we don't want any multicasts.
|
|
*/
|
|
|
|
reg = __raw_readq(sc->sbm_rxfilter);
|
|
reg &= ~(M_MAC_MCAST_INV | M_MAC_MCAST_EN);
|
|
__raw_writeq(reg, sc->sbm_rxfilter);
|
|
|
|
if (dev->flags & IFF_ALLMULTI) {
|
|
/*
|
|
* Enable ALL multicasts. Do this by inverting the
|
|
* multicast enable bit.
|
|
*/
|
|
reg = __raw_readq(sc->sbm_rxfilter);
|
|
reg |= (M_MAC_MCAST_INV | M_MAC_MCAST_EN);
|
|
__raw_writeq(reg, sc->sbm_rxfilter);
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
* Progam new multicast entries. For now, only use the
|
|
* perfect filter. In the future we'll need to use the
|
|
* hash filter if the perfect filter overflows
|
|
*/
|
|
|
|
/* XXX only using perfect filter for now, need to use hash
|
|
* XXX if the table overflows */
|
|
|
|
idx = 1; /* skip station address */
|
|
mclist = dev->mc_list;
|
|
while (mclist && (idx < MAC_ADDR_COUNT)) {
|
|
reg = sbmac_addr2reg(mclist->dmi_addr);
|
|
port = sc->sbm_base + R_MAC_ADDR_BASE+(idx * sizeof(uint64_t));
|
|
__raw_writeq(reg, port);
|
|
idx++;
|
|
mclist = mclist->next;
|
|
}
|
|
|
|
/*
|
|
* Enable the "accept multicast bits" if we programmed at least one
|
|
* multicast.
|
|
*/
|
|
|
|
if (idx > 1) {
|
|
reg = __raw_readq(sc->sbm_rxfilter);
|
|
reg |= M_MAC_MCAST_EN;
|
|
__raw_writeq(reg, sc->sbm_rxfilter);
|
|
}
|
|
}
|
|
|
|
|
|
|
|
#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR) || defined(SBMAC_ETH3_HWADDR)
|
|
/**********************************************************************
|
|
* SBMAC_PARSE_XDIGIT(str)
|
|
*
|
|
* Parse a hex digit, returning its value
|
|
*
|
|
* Input parameters:
|
|
* str - character
|
|
*
|
|
* Return value:
|
|
* hex value, or -1 if invalid
|
|
********************************************************************* */
|
|
|
|
static int sbmac_parse_xdigit(char str)
|
|
{
|
|
int digit;
|
|
|
|
if ((str >= '0') && (str <= '9'))
|
|
digit = str - '0';
|
|
else if ((str >= 'a') && (str <= 'f'))
|
|
digit = str - 'a' + 10;
|
|
else if ((str >= 'A') && (str <= 'F'))
|
|
digit = str - 'A' + 10;
|
|
else
|
|
return -1;
|
|
|
|
return digit;
|
|
}
|
|
|
|
/**********************************************************************
|
|
* SBMAC_PARSE_HWADDR(str,hwaddr)
|
|
*
|
|
* Convert a string in the form xx:xx:xx:xx:xx:xx into a 6-byte
|
|
* Ethernet address.
|
|
*
|
|
* Input parameters:
|
|
* str - string
|
|
* hwaddr - pointer to hardware address
|
|
*
|
|
* Return value:
|
|
* 0 if ok, else -1
|
|
********************************************************************* */
|
|
|
|
static int sbmac_parse_hwaddr(char *str, unsigned char *hwaddr)
|
|
{
|
|
int digit1,digit2;
|
|
int idx = 6;
|
|
|
|
while (*str && (idx > 0)) {
|
|
digit1 = sbmac_parse_xdigit(*str);
|
|
if (digit1 < 0)
|
|
return -1;
|
|
str++;
|
|
if (!*str)
|
|
return -1;
|
|
|
|
if ((*str == ':') || (*str == '-')) {
|
|
digit2 = digit1;
|
|
digit1 = 0;
|
|
}
|
|
else {
|
|
digit2 = sbmac_parse_xdigit(*str);
|
|
if (digit2 < 0)
|
|
return -1;
|
|
str++;
|
|
}
|
|
|
|
*hwaddr++ = (digit1 << 4) | digit2;
|
|
idx--;
|
|
|
|
if (*str == '-')
|
|
str++;
|
|
if (*str == ':')
|
|
str++;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int sb1250_change_mtu(struct net_device *_dev, int new_mtu)
|
|
{
|
|
if (new_mtu > ENET_PACKET_SIZE)
|
|
return -EINVAL;
|
|
_dev->mtu = new_mtu;
|
|
printk(KERN_INFO "changing the mtu to %d\n", new_mtu);
|
|
return 0;
|
|
}
|
|
|
|
/**********************************************************************
|
|
* SBMAC_INIT(dev)
|
|
*
|
|
* Attach routine - init hardware and hook ourselves into linux
|
|
*
|
|
* Input parameters:
|
|
* dev - net_device structure
|
|
*
|
|
* Return value:
|
|
* status
|
|
********************************************************************* */
|
|
|
|
static int sbmac_init(struct net_device *dev, int idx)
|
|
{
|
|
struct sbmac_softc *sc;
|
|
unsigned char *eaddr;
|
|
uint64_t ea_reg;
|
|
int i;
|
|
int err;
|
|
|
|
sc = netdev_priv(dev);
|
|
|
|
/* Determine controller base address */
|
|
|
|
sc->sbm_base = IOADDR(dev->base_addr);
|
|
sc->sbm_dev = dev;
|
|
sc->sbe_idx = idx;
|
|
|
|
eaddr = sc->sbm_hwaddr;
|
|
|
|
/*
|
|
* Read the ethernet address. The firwmare left this programmed
|
|
* for us in the ethernet address register for each mac.
|
|
*/
|
|
|
|
ea_reg = __raw_readq(sc->sbm_base + R_MAC_ETHERNET_ADDR);
|
|
__raw_writeq(0, sc->sbm_base + R_MAC_ETHERNET_ADDR);
|
|
for (i = 0; i < 6; i++) {
|
|
eaddr[i] = (uint8_t) (ea_reg & 0xFF);
|
|
ea_reg >>= 8;
|
|
}
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
dev->dev_addr[i] = eaddr[i];
|
|
}
|
|
|
|
|
|
/*
|
|
* Init packet size
|
|
*/
|
|
|
|
sc->sbm_buffersize = ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN;
|
|
|
|
/*
|
|
* Initialize context (get pointers to registers and stuff), then
|
|
* allocate the memory for the descriptor tables.
|
|
*/
|
|
|
|
sbmac_initctx(sc);
|
|
|
|
/*
|
|
* Set up Linux device callins
|
|
*/
|
|
|
|
spin_lock_init(&(sc->sbm_lock));
|
|
|
|
dev->open = sbmac_open;
|
|
dev->hard_start_xmit = sbmac_start_tx;
|
|
dev->stop = sbmac_close;
|
|
dev->get_stats = sbmac_get_stats;
|
|
dev->set_multicast_list = sbmac_set_rx_mode;
|
|
dev->do_ioctl = sbmac_mii_ioctl;
|
|
dev->tx_timeout = sbmac_tx_timeout;
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
|
|
dev->change_mtu = sb1250_change_mtu;
|
|
|
|
/* This is needed for PASS2 for Rx H/W checksum feature */
|
|
sbmac_set_iphdr_offset(sc);
|
|
|
|
err = register_netdev(dev);
|
|
if (err)
|
|
goto out_uninit;
|
|
|
|
if (sc->rx_hw_checksum == ENABLE) {
|
|
printk(KERN_INFO "%s: enabling TCP rcv checksum\n",
|
|
sc->sbm_dev->name);
|
|
}
|
|
|
|
/*
|
|
* Display Ethernet address (this is called during the config
|
|
* process so we need to finish off the config message that
|
|
* was being displayed)
|
|
*/
|
|
printk(KERN_INFO
|
|
"%s: SiByte Ethernet at 0x%08lX, address: %02X:%02X:%02X:%02X:%02X:%02X\n",
|
|
dev->name, dev->base_addr,
|
|
eaddr[0],eaddr[1],eaddr[2],eaddr[3],eaddr[4],eaddr[5]);
|
|
|
|
|
|
return 0;
|
|
|
|
out_uninit:
|
|
sbmac_uninitctx(sc);
|
|
|
|
return err;
|
|
}
|
|
|
|
|
|
static int sbmac_open(struct net_device *dev)
|
|
{
|
|
struct sbmac_softc *sc = netdev_priv(dev);
|
|
|
|
if (debug > 1) {
|
|
printk(KERN_DEBUG "%s: sbmac_open() irq %d.\n", dev->name, dev->irq);
|
|
}
|
|
|
|
/*
|
|
* map/route interrupt (clear status first, in case something
|
|
* weird is pending; we haven't initialized the mac registers
|
|
* yet)
|
|
*/
|
|
|
|
__raw_readq(sc->sbm_isr);
|
|
if (request_irq(dev->irq, &sbmac_intr, IRQF_SHARED, dev->name, dev))
|
|
return -EBUSY;
|
|
|
|
/*
|
|
* Probe phy address
|
|
*/
|
|
|
|
if(sbmac_mii_probe(dev) == -1) {
|
|
printk("%s: failed to probe PHY.\n", dev->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Configure default speed
|
|
*/
|
|
|
|
sbmac_mii_poll(sc,noisy_mii);
|
|
|
|
/*
|
|
* Turn on the channel
|
|
*/
|
|
|
|
sbmac_set_channel_state(sc,sbmac_state_on);
|
|
|
|
/*
|
|
* XXX Station address is in dev->dev_addr
|
|
*/
|
|
|
|
if (dev->if_port == 0)
|
|
dev->if_port = 0;
|
|
|
|
netif_start_queue(dev);
|
|
|
|
sbmac_set_rx_mode(dev);
|
|
|
|
/* Set the timer to check for link beat. */
|
|
init_timer(&sc->sbm_timer);
|
|
sc->sbm_timer.expires = jiffies + 2 * HZ/100;
|
|
sc->sbm_timer.data = (unsigned long)dev;
|
|
sc->sbm_timer.function = &sbmac_timer;
|
|
add_timer(&sc->sbm_timer);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sbmac_mii_probe(struct net_device *dev)
|
|
{
|
|
int i;
|
|
struct sbmac_softc *s = netdev_priv(dev);
|
|
u16 bmsr, id1, id2;
|
|
u32 vendor, device;
|
|
|
|
for (i=1; i<31; i++) {
|
|
bmsr = sbmac_mii_read(s, i, MII_BMSR);
|
|
if (bmsr != 0) {
|
|
s->sbm_phys[0] = i;
|
|
id1 = sbmac_mii_read(s, i, MII_PHYIDR1);
|
|
id2 = sbmac_mii_read(s, i, MII_PHYIDR2);
|
|
vendor = ((u32)id1 << 6) | ((id2 >> 10) & 0x3f);
|
|
device = (id2 >> 4) & 0x3f;
|
|
|
|
printk(KERN_INFO "%s: found phy %d, vendor %06x part %02x\n",
|
|
dev->name, i, vendor, device);
|
|
return i;
|
|
}
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
|
|
static int sbmac_mii_poll(struct sbmac_softc *s,int noisy)
|
|
{
|
|
int bmsr,bmcr,k1stsr,anlpar;
|
|
int chg;
|
|
char buffer[100];
|
|
char *p = buffer;
|
|
|
|
/* Read the mode status and mode control registers. */
|
|
bmsr = sbmac_mii_read(s,s->sbm_phys[0],MII_BMSR);
|
|
bmcr = sbmac_mii_read(s,s->sbm_phys[0],MII_BMCR);
|
|
|
|
/* get the link partner status */
|
|
anlpar = sbmac_mii_read(s,s->sbm_phys[0],MII_ANLPAR);
|
|
|
|
/* if supported, read the 1000baseT register */
|
|
if (bmsr & BMSR_1000BT_XSR) {
|
|
k1stsr = sbmac_mii_read(s,s->sbm_phys[0],MII_K1STSR);
|
|
}
|
|
else {
|
|
k1stsr = 0;
|
|
}
|
|
|
|
chg = 0;
|
|
|
|
if ((bmsr & BMSR_LINKSTAT) == 0) {
|
|
/*
|
|
* If link status is down, clear out old info so that when
|
|
* it comes back up it will force us to reconfigure speed
|
|
*/
|
|
s->sbm_phy_oldbmsr = 0;
|
|
s->sbm_phy_oldanlpar = 0;
|
|
s->sbm_phy_oldk1stsr = 0;
|
|
return 0;
|
|
}
|
|
|
|
if ((s->sbm_phy_oldbmsr != bmsr) ||
|
|
(s->sbm_phy_oldanlpar != anlpar) ||
|
|
(s->sbm_phy_oldk1stsr != k1stsr)) {
|
|
if (debug > 1) {
|
|
printk(KERN_DEBUG "%s: bmsr:%x/%x anlpar:%x/%x k1stsr:%x/%x\n",
|
|
s->sbm_dev->name,
|
|
s->sbm_phy_oldbmsr,bmsr,
|
|
s->sbm_phy_oldanlpar,anlpar,
|
|
s->sbm_phy_oldk1stsr,k1stsr);
|
|
}
|
|
s->sbm_phy_oldbmsr = bmsr;
|
|
s->sbm_phy_oldanlpar = anlpar;
|
|
s->sbm_phy_oldk1stsr = k1stsr;
|
|
chg = 1;
|
|
}
|
|
|
|
if (chg == 0)
|
|
return 0;
|
|
|
|
p += sprintf(p,"Link speed: ");
|
|
|
|
if (k1stsr & K1STSR_LP1KFD) {
|
|
s->sbm_speed = sbmac_speed_1000;
|
|
s->sbm_duplex = sbmac_duplex_full;
|
|
s->sbm_fc = sbmac_fc_frame;
|
|
p += sprintf(p,"1000BaseT FDX");
|
|
}
|
|
else if (k1stsr & K1STSR_LP1KHD) {
|
|
s->sbm_speed = sbmac_speed_1000;
|
|
s->sbm_duplex = sbmac_duplex_half;
|
|
s->sbm_fc = sbmac_fc_disabled;
|
|
p += sprintf(p,"1000BaseT HDX");
|
|
}
|
|
else if (anlpar & ANLPAR_TXFD) {
|
|
s->sbm_speed = sbmac_speed_100;
|
|
s->sbm_duplex = sbmac_duplex_full;
|
|
s->sbm_fc = (anlpar & ANLPAR_PAUSE) ? sbmac_fc_frame : sbmac_fc_disabled;
|
|
p += sprintf(p,"100BaseT FDX");
|
|
}
|
|
else if (anlpar & ANLPAR_TXHD) {
|
|
s->sbm_speed = sbmac_speed_100;
|
|
s->sbm_duplex = sbmac_duplex_half;
|
|
s->sbm_fc = sbmac_fc_disabled;
|
|
p += sprintf(p,"100BaseT HDX");
|
|
}
|
|
else if (anlpar & ANLPAR_10FD) {
|
|
s->sbm_speed = sbmac_speed_10;
|
|
s->sbm_duplex = sbmac_duplex_full;
|
|
s->sbm_fc = sbmac_fc_frame;
|
|
p += sprintf(p,"10BaseT FDX");
|
|
}
|
|
else if (anlpar & ANLPAR_10HD) {
|
|
s->sbm_speed = sbmac_speed_10;
|
|
s->sbm_duplex = sbmac_duplex_half;
|
|
s->sbm_fc = sbmac_fc_collision;
|
|
p += sprintf(p,"10BaseT HDX");
|
|
}
|
|
else {
|
|
p += sprintf(p,"Unknown");
|
|
}
|
|
|
|
if (noisy) {
|
|
printk(KERN_INFO "%s: %s\n",s->sbm_dev->name,buffer);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
|
|
static void sbmac_timer(unsigned long data)
|
|
{
|
|
struct net_device *dev = (struct net_device *)data;
|
|
struct sbmac_softc *sc = netdev_priv(dev);
|
|
int next_tick = HZ;
|
|
int mii_status;
|
|
|
|
spin_lock_irq (&sc->sbm_lock);
|
|
|
|
/* make IFF_RUNNING follow the MII status bit "Link established" */
|
|
mii_status = sbmac_mii_read(sc, sc->sbm_phys[0], MII_BMSR);
|
|
|
|
if ( (mii_status & BMSR_LINKSTAT) != (sc->sbm_phy_oldlinkstat) ) {
|
|
sc->sbm_phy_oldlinkstat = mii_status & BMSR_LINKSTAT;
|
|
if (mii_status & BMSR_LINKSTAT) {
|
|
netif_carrier_on(dev);
|
|
}
|
|
else {
|
|
netif_carrier_off(dev);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Poll the PHY to see what speed we should be running at
|
|
*/
|
|
|
|
if (sbmac_mii_poll(sc,noisy_mii)) {
|
|
if (sc->sbm_state != sbmac_state_off) {
|
|
/*
|
|
* something changed, restart the channel
|
|
*/
|
|
if (debug > 1) {
|
|
printk("%s: restarting channel because speed changed\n",
|
|
sc->sbm_dev->name);
|
|
}
|
|
sbmac_channel_stop(sc);
|
|
sbmac_channel_start(sc);
|
|
}
|
|
}
|
|
|
|
spin_unlock_irq (&sc->sbm_lock);
|
|
|
|
sc->sbm_timer.expires = jiffies + next_tick;
|
|
add_timer(&sc->sbm_timer);
|
|
}
|
|
|
|
|
|
static void sbmac_tx_timeout (struct net_device *dev)
|
|
{
|
|
struct sbmac_softc *sc = netdev_priv(dev);
|
|
|
|
spin_lock_irq (&sc->sbm_lock);
|
|
|
|
|
|
dev->trans_start = jiffies;
|
|
sc->sbm_stats.tx_errors++;
|
|
|
|
spin_unlock_irq (&sc->sbm_lock);
|
|
|
|
printk (KERN_WARNING "%s: Transmit timed out\n",dev->name);
|
|
}
|
|
|
|
|
|
|
|
|
|
static struct net_device_stats *sbmac_get_stats(struct net_device *dev)
|
|
{
|
|
struct sbmac_softc *sc = netdev_priv(dev);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&sc->sbm_lock, flags);
|
|
|
|
/* XXX update other stats here */
|
|
|
|
spin_unlock_irqrestore(&sc->sbm_lock, flags);
|
|
|
|
return &sc->sbm_stats;
|
|
}
|
|
|
|
|
|
|
|
static void sbmac_set_rx_mode(struct net_device *dev)
|
|
{
|
|
unsigned long flags;
|
|
struct sbmac_softc *sc = netdev_priv(dev);
|
|
|
|
spin_lock_irqsave(&sc->sbm_lock, flags);
|
|
if ((dev->flags ^ sc->sbm_devflags) & IFF_PROMISC) {
|
|
/*
|
|
* Promiscuous changed.
|
|
*/
|
|
|
|
if (dev->flags & IFF_PROMISC) {
|
|
sbmac_promiscuous_mode(sc,1);
|
|
}
|
|
else {
|
|
sbmac_promiscuous_mode(sc,0);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&sc->sbm_lock, flags);
|
|
|
|
/*
|
|
* Program the multicasts. Do this every time.
|
|
*/
|
|
|
|
sbmac_setmulti(sc);
|
|
|
|
}
|
|
|
|
static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct sbmac_softc *sc = netdev_priv(dev);
|
|
u16 *data = (u16 *)&rq->ifr_ifru;
|
|
unsigned long flags;
|
|
int retval;
|
|
|
|
spin_lock_irqsave(&sc->sbm_lock, flags);
|
|
retval = 0;
|
|
|
|
switch(cmd) {
|
|
case SIOCDEVPRIVATE: /* Get the address of the PHY in use. */
|
|
data[0] = sc->sbm_phys[0] & 0x1f;
|
|
/* Fall Through */
|
|
case SIOCDEVPRIVATE+1: /* Read the specified MII register. */
|
|
data[3] = sbmac_mii_read(sc, data[0] & 0x1f, data[1] & 0x1f);
|
|
break;
|
|
case SIOCDEVPRIVATE+2: /* Write the specified MII register */
|
|
if (!capable(CAP_NET_ADMIN)) {
|
|
retval = -EPERM;
|
|
break;
|
|
}
|
|
if (debug > 1) {
|
|
printk(KERN_DEBUG "%s: sbmac_mii_ioctl: write %02X %02X %02X\n",dev->name,
|
|
data[0],data[1],data[2]);
|
|
}
|
|
sbmac_mii_write(sc, data[0] & 0x1f, data[1] & 0x1f, data[2]);
|
|
break;
|
|
default:
|
|
retval = -EOPNOTSUPP;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&sc->sbm_lock, flags);
|
|
return retval;
|
|
}
|
|
|
|
static int sbmac_close(struct net_device *dev)
|
|
{
|
|
struct sbmac_softc *sc = netdev_priv(dev);
|
|
unsigned long flags;
|
|
int irq;
|
|
|
|
sbmac_set_channel_state(sc,sbmac_state_off);
|
|
|
|
del_timer_sync(&sc->sbm_timer);
|
|
|
|
spin_lock_irqsave(&sc->sbm_lock, flags);
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
if (debug > 1) {
|
|
printk(KERN_DEBUG "%s: Shutting down ethercard\n",dev->name);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&sc->sbm_lock, flags);
|
|
|
|
irq = dev->irq;
|
|
synchronize_irq(irq);
|
|
free_irq(irq, dev);
|
|
|
|
sbdma_emptyring(&(sc->sbm_txdma));
|
|
sbdma_emptyring(&(sc->sbm_rxdma));
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
|
|
#if defined(SBMAC_ETH0_HWADDR) || defined(SBMAC_ETH1_HWADDR) || defined(SBMAC_ETH2_HWADDR) || defined(SBMAC_ETH3_HWADDR)
|
|
static void
|
|
sbmac_setup_hwaddr(int chan,char *addr)
|
|
{
|
|
uint8_t eaddr[6];
|
|
uint64_t val;
|
|
unsigned long port;
|
|
|
|
port = A_MAC_CHANNEL_BASE(chan);
|
|
sbmac_parse_hwaddr(addr,eaddr);
|
|
val = sbmac_addr2reg(eaddr);
|
|
__raw_writeq(val, IOADDR(port+R_MAC_ETHERNET_ADDR));
|
|
val = __raw_readq(IOADDR(port+R_MAC_ETHERNET_ADDR));
|
|
}
|
|
#endif
|
|
|
|
static struct net_device *dev_sbmac[MAX_UNITS];
|
|
|
|
static int __init
|
|
sbmac_init_module(void)
|
|
{
|
|
int idx;
|
|
struct net_device *dev;
|
|
unsigned long port;
|
|
int chip_max_units;
|
|
|
|
/* Set the number of available units based on the SOC type. */
|
|
switch (soc_type) {
|
|
case K_SYS_SOC_TYPE_BCM1250:
|
|
case K_SYS_SOC_TYPE_BCM1250_ALT:
|
|
chip_max_units = 3;
|
|
break;
|
|
case K_SYS_SOC_TYPE_BCM1120:
|
|
case K_SYS_SOC_TYPE_BCM1125:
|
|
case K_SYS_SOC_TYPE_BCM1125H:
|
|
case K_SYS_SOC_TYPE_BCM1250_ALT2: /* Hybrid */
|
|
chip_max_units = 2;
|
|
break;
|
|
case K_SYS_SOC_TYPE_BCM1x55:
|
|
case K_SYS_SOC_TYPE_BCM1x80:
|
|
chip_max_units = 4;
|
|
break;
|
|
default:
|
|
chip_max_units = 0;
|
|
break;
|
|
}
|
|
if (chip_max_units > MAX_UNITS)
|
|
chip_max_units = MAX_UNITS;
|
|
|
|
/*
|
|
* For bringup when not using the firmware, we can pre-fill
|
|
* the MAC addresses using the environment variables
|
|
* specified in this file (or maybe from the config file?)
|
|
*/
|
|
#ifdef SBMAC_ETH0_HWADDR
|
|
if (chip_max_units > 0)
|
|
sbmac_setup_hwaddr(0,SBMAC_ETH0_HWADDR);
|
|
#endif
|
|
#ifdef SBMAC_ETH1_HWADDR
|
|
if (chip_max_units > 1)
|
|
sbmac_setup_hwaddr(1,SBMAC_ETH1_HWADDR);
|
|
#endif
|
|
#ifdef SBMAC_ETH2_HWADDR
|
|
if (chip_max_units > 2)
|
|
sbmac_setup_hwaddr(2,SBMAC_ETH2_HWADDR);
|
|
#endif
|
|
#ifdef SBMAC_ETH3_HWADDR
|
|
if (chip_max_units > 3)
|
|
sbmac_setup_hwaddr(3,SBMAC_ETH3_HWADDR);
|
|
#endif
|
|
|
|
/*
|
|
* Walk through the Ethernet controllers and find
|
|
* those who have their MAC addresses set.
|
|
*/
|
|
for (idx = 0; idx < chip_max_units; idx++) {
|
|
|
|
/*
|
|
* This is the base address of the MAC.
|
|
*/
|
|
|
|
port = A_MAC_CHANNEL_BASE(idx);
|
|
|
|
/*
|
|
* The R_MAC_ETHERNET_ADDR register will be set to some nonzero
|
|
* value for us by the firmware if we're going to use this MAC.
|
|
* If we find a zero, skip this MAC.
|
|
*/
|
|
|
|
sbmac_orig_hwaddr[idx] = __raw_readq(IOADDR(port+R_MAC_ETHERNET_ADDR));
|
|
if (sbmac_orig_hwaddr[idx] == 0) {
|
|
printk(KERN_DEBUG "sbmac: not configuring MAC at "
|
|
"%lx\n", port);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* Okay, cool. Initialize this MAC.
|
|
*/
|
|
|
|
dev = alloc_etherdev(sizeof(struct sbmac_softc));
|
|
if (!dev)
|
|
return -ENOMEM; /* return ENOMEM */
|
|
|
|
printk(KERN_DEBUG "sbmac: configuring MAC at %lx\n", port);
|
|
|
|
dev->irq = UNIT_INT(idx);
|
|
dev->base_addr = port;
|
|
dev->mem_end = 0;
|
|
if (sbmac_init(dev, idx)) {
|
|
port = A_MAC_CHANNEL_BASE(idx);
|
|
__raw_writeq(sbmac_orig_hwaddr[idx], IOADDR(port+R_MAC_ETHERNET_ADDR));
|
|
free_netdev(dev);
|
|
continue;
|
|
}
|
|
dev_sbmac[idx] = dev;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void __exit
|
|
sbmac_cleanup_module(void)
|
|
{
|
|
struct net_device *dev;
|
|
int idx;
|
|
|
|
for (idx = 0; idx < MAX_UNITS; idx++) {
|
|
struct sbmac_softc *sc;
|
|
dev = dev_sbmac[idx];
|
|
if (!dev)
|
|
continue;
|
|
|
|
sc = netdev_priv(dev);
|
|
unregister_netdev(dev);
|
|
sbmac_uninitctx(sc);
|
|
free_netdev(dev);
|
|
}
|
|
}
|
|
|
|
module_init(sbmac_init_module);
|
|
module_exit(sbmac_cleanup_module);
|