Kai-Heng Feng 9947d6a09c nvme: relax APST default max latency to 100ms ... Christoph Hellwig suggests we should to make APST work out of the box. Hence relax the the default max latency to make them able to enter deepest power state on default. Here are id-ctrl excerpts from two high latency NVMes: vid : 0x14a4 ssvid : 0x1b4b mn : CX2-GB1024-Q11 NVMe LITEON 1024GB ps 3 : mp:0.1000W non-operational enlat:5000 exlat:5000 rrt:3 rrl:3 rwt:3 rwl:3 idle_power:- active_power:- ps 4 : mp:0.0100W non-operational enlat:50000 exlat:100000 rrt:4 rrl:4 rwt:4 rwl:4 idle_power:- active_power:- vid : 0x15b7 ssvid : 0x1b4b mn : A400 NVMe SanDisk 512GB ps 3 : mp:0.0500W non-operational enlat:51000 exlat:10000 rrt:0 rrl:0 rwt:0 rwl:0 idle_power:- active_power:- ps 4 : mp:0.0055W non-operational enlat:1000000 exlat:100000 rrt:0 rrl:0 rwt:0 rwl:0 idle_power:- active_power:- Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Christoph Hellwig <hch@lst.de>		2017-06-07 11:08:55 +02:00
..
core.c	nvme: relax APST default max latency to 100ms	2017-06-07 11:08:55 +02:00
fabrics.c	nvme-fabrics: Allow ctrl loss timeout configuration	2017-04-04 09:48:23 -06:00
fabrics.h	nvme-fabrics: Allow ctrl loss timeout configuration	2017-04-04 09:48:23 -06:00
fc.c	nvme-fc: fix missing put reference on controller create failure	2017-06-07 11:08:53 +02:00
Kconfig	nvme-fabrics: Add host support for FC transport	2016-12-06 10:17:56 +02:00
lightnvm.c	nvme: lightnvm: fix memory leak	2017-05-10 07:39:43 -06:00
Makefile	nvme-fabrics: Add host support for FC transport	2016-12-06 10:17:56 +02:00
nvme.h	nvme: only setup block integrity if supported by the driver	2017-05-26 09:54:23 +03:00
pci.c	nvme-pci: fix multiple ctrl removal scheduling	2017-06-07 11:08:50 +02:00
rdma.c	nvme-rdma: fast fail incoming requests while we reconnect	2017-06-07 11:08:51 +02:00
scsi.c	nvme-scsi: remove nvme_trans_security_protocol	2017-04-27 08:39:32 +02:00