redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/gpu/drm/i915/intel_ddi.c
Paulo Zanoni b2b877ffe3 drm/i915: make intel_ddi_get_cdclk_freq return values in KHz 
With this, that 338 can finally become the correct 337500.

Due to the change we need to adjust the intel_dp_aux_ch function to
set the correct value, so adjust the division and also use
DIV_ROUND_CLOSEST instead of the old "round down" behavior because the
spec says the value "should be programmed to get as close as possible
to the ideal rate of 2MHz".

Quoting Paulo's follow-up to a question from Chris Wilson to explain
what exactly will change:

I use the 337500 value on the next patch, when setting the
ips_linetime value. The correct frequency is 337500, not 338000.

ips_linetime = DIV_ROUND_CLOSEST(mode->htotal * 1000 * 8,
intel_ddi_get_cdclk_freq);
For a mode with htotal of 2640 [0] we'll have: (i) (2640 * 1000 * 8) /
338000 = 62.48, resulting in 62 and (ii) (2640 * 1000 * 8) / 337500 =
62.57 resulting in 63.

For the case inside intel_dp.c:
Previously we were using 338. So with the old formula we were writing
338/2 = 169 to the register. And 337500 / 169 = 1997.04 (we use 337500
here because it's the real clock value). With the new value of
337500/2000 we'll have 168.75, which is 168 on the round-down case and
169 on the round-closest case. If we write 168 to the register, 337500
/ 168 = 2008.92, and 2008.92 is more distant from 2000 than 1997.04.
So with this patch we're changing the formula but still writing the
same correct value to the DP AUX register.

[0]: That's 1920x1080@50Hz on my DP monitor.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
[danvet: Pimp the commit message with Paulo's follow-up.]
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-05-21 11:54:41 +02:00

1368 lines
37 KiB
C
Raw Blame History

/*
* Copyright © 2012 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Eugeni Dodonov <eugeni.dodonov@intel.com>
*
*/
#include "i915_drv.h"
#include "intel_drv.h"
/* HDMI/DVI modes ignore everything but the last 2 items. So we share
* them for both DP and FDI transports, allowing those ports to
* automatically adapt to HDMI connections as well
*/
static const u32 hsw_ddi_translations_dp[] = {
0x00FFFFFF, 0x0006000E, /* DP parameters */
0x00D75FFF, 0x0005000A,
0x00C30FFF, 0x00040006,
0x80AAAFFF, 0x000B0000,
0x00FFFFFF, 0x0005000A,
0x00D75FFF, 0x000C0004,
0x80C30FFF, 0x000B0000,
0x00FFFFFF, 0x00040006,
0x80D75FFF, 0x000B0000,
0x00FFFFFF, 0x00040006 /* HDMI parameters */
};
static const u32 hsw_ddi_translations_fdi[] = {
0x00FFFFFF, 0x0007000E, /* FDI parameters */
0x00D75FFF, 0x000F000A,
0x00C30FFF, 0x00060006,
0x00AAAFFF, 0x001E0000,
0x00FFFFFF, 0x000F000A,
0x00D75FFF, 0x00160004,
0x00C30FFF, 0x001E0000,
0x00FFFFFF, 0x00060006,
0x00D75FFF, 0x001E0000,
0x00FFFFFF, 0x00040006 /* HDMI parameters */
};
static enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder)
{
struct drm_encoder *encoder = &intel_encoder->base;
int type = intel_encoder->type;
if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP ||
type == INTEL_OUTPUT_HDMI || type == INTEL_OUTPUT_UNKNOWN) {
struct intel_digital_port *intel_dig_port =
enc_to_dig_port(encoder);
return intel_dig_port->port;
} else if (type == INTEL_OUTPUT_ANALOG) {
return PORT_E;
} else {
DRM_ERROR("Invalid DDI encoder type %d\n", type);
BUG();
}
}
/* On Haswell, DDI port buffers must be programmed with correct values
* in advance. The buffer values are different for FDI and DP modes,
* but the HDMI/DVI fields are shared among those. So we program the DDI
* in either FDI or DP modes only, as HDMI connections will work with both
* of those
*/
static void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port,
bool use_fdi_mode)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 reg;
int i;
const u32 *ddi_translations = ((use_fdi_mode) ?
hsw_ddi_translations_fdi :
hsw_ddi_translations_dp);
DRM_DEBUG_DRIVER("Initializing DDI buffers for port %c in %s mode\n",
port_name(port),
use_fdi_mode ? "FDI" : "DP");
WARN((use_fdi_mode && (port != PORT_E)),
"Programming port %c in FDI mode, this probably will not work.\n",
port_name(port));
for (i=0, reg=DDI_BUF_TRANS(port); i < ARRAY_SIZE(hsw_ddi_translations_fdi); i++) {
I915_WRITE(reg, ddi_translations[i]);
reg += 4;
}
}
/* Program DDI buffers translations for DP. By default, program ports A-D in DP
* mode and port E for FDI.
*/
void intel_prepare_ddi(struct drm_device *dev)
{
int port;
if (!HAS_DDI(dev))
return;
for (port = PORT_A; port < PORT_E; port++)
intel_prepare_ddi_buffers(dev, port, false);
/* DDI E is the suggested one to work in FDI mode, so program is as such
* by default. It will have to be re-programmed in case a digital DP
* output will be detected on it
*/
intel_prepare_ddi_buffers(dev, PORT_E, true);
}
static const long hsw_ddi_buf_ctl_values[] = {
DDI_BUF_EMP_400MV_0DB_HSW,
DDI_BUF_EMP_400MV_3_5DB_HSW,
DDI_BUF_EMP_400MV_6DB_HSW,
DDI_BUF_EMP_400MV_9_5DB_HSW,
DDI_BUF_EMP_600MV_0DB_HSW,
DDI_BUF_EMP_600MV_3_5DB_HSW,
DDI_BUF_EMP_600MV_6DB_HSW,
DDI_BUF_EMP_800MV_0DB_HSW,
DDI_BUF_EMP_800MV_3_5DB_HSW
};
static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
enum port port)
{
uint32_t reg = DDI_BUF_CTL(port);
int i;
for (i = 0; i < 8; i++) {
udelay(1);
if (I915_READ(reg) & DDI_BUF_IS_IDLE)
return;
}
DRM_ERROR("Timeout waiting for DDI BUF %c idle bit\n", port_name(port));
}
/* Starting with Haswell, different DDI ports can work in FDI mode for
* connection to the PCH-located connectors. For this, it is necessary to train
* both the DDI port and PCH receiver for the desired DDI buffer settings.
*
* The recommended port to work in FDI mode is DDI E, which we use here. Also,
* please note that when FDI mode is active on DDI E, it shares 2 lines with
* DDI A (which is used for eDP)
*/
void hsw_fdi_link_train(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
u32 temp, i, rx_ctl_val;
/* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
* mode set "sequence for CRT port" document:
* - TP1 to TP2 time with the default value
* - FDI delay to 90h
*
* WaFDIAutoLinkSetTimingOverrride:hsw
*/
I915_WRITE(_FDI_RXA_MISC, FDI_RX_PWRDN_LANE1_VAL(2) |
FDI_RX_PWRDN_LANE0_VAL(2) |
FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
/* Enable the PCH Receiver FDI PLL */
rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE |
FDI_RX_PLL_ENABLE |
FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes);
I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
POSTING_READ(_FDI_RXA_CTL);
udelay(220);
/* Switch from Rawclk to PCDclk */
rx_ctl_val |= FDI_PCDCLK;
I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
/* Configure Port Clock Select */
I915_WRITE(PORT_CLK_SEL(PORT_E), intel_crtc->ddi_pll_sel);
/* Start the training iterating through available voltages and emphasis,
* testing each value twice. */
for (i = 0; i < ARRAY_SIZE(hsw_ddi_buf_ctl_values) * 2; i++) {
/* Configure DP_TP_CTL with auto-training */
I915_WRITE(DP_TP_CTL(PORT_E),
DP_TP_CTL_FDI_AUTOTRAIN |
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
DP_TP_CTL_LINK_TRAIN_PAT1 |
DP_TP_CTL_ENABLE);
/* Configure and enable DDI_BUF_CTL for DDI E with next voltage.
* DDI E does not support port reversal, the functionality is
* achieved on the PCH side in FDI_RX_CTL, so no need to set the
* port reversal bit */
I915_WRITE(DDI_BUF_CTL(PORT_E),
DDI_BUF_CTL_ENABLE |
((intel_crtc->config.fdi_lanes - 1) << 1) |
hsw_ddi_buf_ctl_values[i / 2]);
POSTING_READ(DDI_BUF_CTL(PORT_E));
udelay(600);
/* Program PCH FDI Receiver TU */
I915_WRITE(_FDI_RXA_TUSIZE1, TU_SIZE(64));
/* Enable PCH FDI Receiver with auto-training */
rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO;
I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
POSTING_READ(_FDI_RXA_CTL);
/* Wait for FDI receiver lane calibration */
udelay(30);
/* Unset FDI_RX_MISC pwrdn lanes */
temp = I915_READ(_FDI_RXA_MISC);
temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
I915_WRITE(_FDI_RXA_MISC, temp);
POSTING_READ(_FDI_RXA_MISC);
/* Wait for FDI auto training time */
udelay(5);
temp = I915_READ(DP_TP_STATUS(PORT_E));
if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
DRM_DEBUG_KMS("FDI link training done on step %d\n", i);
/* Enable normal pixel sending for FDI */
I915_WRITE(DP_TP_CTL(PORT_E),
DP_TP_CTL_FDI_AUTOTRAIN |
DP_TP_CTL_LINK_TRAIN_NORMAL |
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
DP_TP_CTL_ENABLE);
return;
}
temp = I915_READ(DDI_BUF_CTL(PORT_E));
temp &= ~DDI_BUF_CTL_ENABLE;
I915_WRITE(DDI_BUF_CTL(PORT_E), temp);
POSTING_READ(DDI_BUF_CTL(PORT_E));
/* Disable DP_TP_CTL and FDI_RX_CTL and retry */
temp = I915_READ(DP_TP_CTL(PORT_E));
temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
I915_WRITE(DP_TP_CTL(PORT_E), temp);
POSTING_READ(DP_TP_CTL(PORT_E));
intel_wait_ddi_buf_idle(dev_priv, PORT_E);
rx_ctl_val &= ~FDI_RX_ENABLE;
I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
POSTING_READ(_FDI_RXA_CTL);
/* Reset FDI_RX_MISC pwrdn lanes */
temp = I915_READ(_FDI_RXA_MISC);
temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
I915_WRITE(_FDI_RXA_MISC, temp);
POSTING_READ(_FDI_RXA_MISC);
}
DRM_ERROR("FDI link training failed!\n");
}
static void intel_ddi_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_crtc *crtc = encoder->crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
int port = intel_ddi_get_encoder_port(intel_encoder);
int pipe = intel_crtc->pipe;
int type = intel_encoder->type;
DRM_DEBUG_KMS("Preparing DDI mode on port %c, pipe %c\n",
port_name(port), pipe_name(pipe));
intel_crtc->eld_vld = false;
if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
struct intel_digital_port *intel_dig_port =
enc_to_dig_port(encoder);
intel_dp->DP = intel_dig_port->port_reversal |
DDI_BUF_CTL_ENABLE | DDI_BUF_EMP_400MV_0DB_HSW;
intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count);
if (intel_dp->has_audio) {
DRM_DEBUG_DRIVER("DP audio on pipe %c on DDI\n",
pipe_name(intel_crtc->pipe));
/* write eld */
DRM_DEBUG_DRIVER("DP audio: write eld information\n");
intel_write_eld(encoder, adjusted_mode);
}
intel_dp_init_link_config(intel_dp);
} else if (type == INTEL_OUTPUT_HDMI) {
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
if (intel_hdmi->has_audio) {
/* Proper support for digital audio needs a new logic
* and a new set of registers, so we leave it for future
* patch bombing.
*/
DRM_DEBUG_DRIVER("HDMI audio on pipe %c on DDI\n",
pipe_name(intel_crtc->pipe));
/* write eld */
DRM_DEBUG_DRIVER("HDMI audio: write eld information\n");
intel_write_eld(encoder, adjusted_mode);
}
intel_hdmi->set_infoframes(encoder, adjusted_mode);
}
}
static struct intel_encoder *
intel_ddi_get_crtc_encoder(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *intel_encoder, *ret = NULL;
int num_encoders = 0;
for_each_encoder_on_crtc(dev, crtc, intel_encoder) {
ret = intel_encoder;
num_encoders++;
}
if (num_encoders != 1)
WARN(1, "%d encoders on crtc for pipe %c\n", num_encoders,
pipe_name(intel_crtc->pipe));
BUG_ON(ret == NULL);
return ret;
}
void intel_ddi_put_crtc_pll(struct drm_crtc *crtc)
{
struct drm_i915_private *dev_priv = crtc->dev->dev_private;
struct intel_ddi_plls *plls = &dev_priv->ddi_plls;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
uint32_t val;
switch (intel_crtc->ddi_pll_sel) {
case PORT_CLK_SEL_SPLL:
plls->spll_refcount--;
if (plls->spll_refcount == 0) {
DRM_DEBUG_KMS("Disabling SPLL\n");
val = I915_READ(SPLL_CTL);
WARN_ON(!(val & SPLL_PLL_ENABLE));
I915_WRITE(SPLL_CTL, val & ~SPLL_PLL_ENABLE);
POSTING_READ(SPLL_CTL);
}
break;
case PORT_CLK_SEL_WRPLL1:
plls->wrpll1_refcount--;
if (plls->wrpll1_refcount == 0) {
DRM_DEBUG_KMS("Disabling WRPLL 1\n");
val = I915_READ(WRPLL_CTL1);
WARN_ON(!(val & WRPLL_PLL_ENABLE));
I915_WRITE(WRPLL_CTL1, val & ~WRPLL_PLL_ENABLE);
POSTING_READ(WRPLL_CTL1);
}
break;
case PORT_CLK_SEL_WRPLL2:
plls->wrpll2_refcount--;
if (plls->wrpll2_refcount == 0) {
DRM_DEBUG_KMS("Disabling WRPLL 2\n");
val = I915_READ(WRPLL_CTL2);
WARN_ON(!(val & WRPLL_PLL_ENABLE));
I915_WRITE(WRPLL_CTL2, val & ~WRPLL_PLL_ENABLE);
POSTING_READ(WRPLL_CTL2);
}
break;
}
WARN(plls->spll_refcount < 0, "Invalid SPLL refcount\n");
WARN(plls->wrpll1_refcount < 0, "Invalid WRPLL1 refcount\n");
WARN(plls->wrpll2_refcount < 0, "Invalid WRPLL2 refcount\n");
intel_crtc->ddi_pll_sel = PORT_CLK_SEL_NONE;
}
#define LC_FREQ 2700
#define LC_FREQ_2K (LC_FREQ * 2000)
#define P_MIN 2
#define P_MAX 64
#define P_INC 2
/* Constraints for PLL good behavior */
#define REF_MIN 48
#define REF_MAX 400
#define VCO_MIN 2400
#define VCO_MAX 4800
#define ABS_DIFF(a, b) ((a > b) ? (a - b) : (b - a))
struct wrpll_rnp {
unsigned p, n2, r2;
};
static unsigned wrpll_get_budget_for_freq(int clock)
{
unsigned budget;
switch (clock) {
case 25175000:
case 25200000:
case 27000000:
case 27027000:
case 37762500:
case 37800000:
case 40500000:
case 40541000:
case 54000000:
case 54054000:
case 59341000:
case 59400000:
case 72000000:
case 74176000:
case 74250000:
case 81000000:
case 81081000:
case 89012000:
case 89100000:
case 108000000:
case 108108000:
case 111264000:
case 111375000:
case 148352000:
case 148500000:
case 162000000:
case 162162000:
case 222525000:
case 222750000:
case 296703000:
case 297000000:
budget = 0;
break;
case 233500000:
case 245250000:
case 247750000:
case 253250000:
case 298000000:
budget = 1500;
break;
case 169128000:
case 169500000:
case 179500000:
case 202000000:
budget = 2000;
break;
case 256250000:
case 262500000:
case 270000000:
case 272500000:
case 273750000:
case 280750000:
case 281250000:
case 286000000:
case 291750000:
budget = 4000;
break;
case 267250000:
case 268500000:
budget = 5000;
break;
default:
budget = 1000;
break;
}
return budget;
}
static void wrpll_update_rnp(uint64_t freq2k, unsigned budget,
unsigned r2, unsigned n2, unsigned p,
struct wrpll_rnp *best)
{
uint64_t a, b, c, d, diff, diff_best;
/* No best (r,n,p) yet */
if (best->p == 0) {
best->p = p;
best->n2 = n2;
best->r2 = r2;
return;
}
/*
* Output clock is (LC_FREQ_2K / 2000) * N / (P * R), which compares to
* freq2k.
*
* delta = 1e6 *
* abs(freq2k - (LC_FREQ_2K * n2/(p * r2))) /
* freq2k;
*
* and we would like delta <= budget.
*
* If the discrepancy is above the PPM-based budget, always prefer to
* improve upon the previous solution. However, if you're within the
* budget, try to maximize Ref * VCO, that is N / (P * R^2).
*/
a = freq2k * budget * p * r2;
b = freq2k * budget * best->p * best->r2;
diff = ABS_DIFF((freq2k * p * r2), (LC_FREQ_2K * n2));
diff_best = ABS_DIFF((freq2k * best->p * best->r2),
(LC_FREQ_2K * best->n2));
c = 1000000 * diff;
d = 1000000 * diff_best;
if (a < c && b < d) {
/* If both are above the budget, pick the closer */
if (best->p * best->r2 * diff < p * r2 * diff_best) {
best->p = p;
best->n2 = n2;
best->r2 = r2;
}
} else if (a >= c && b < d) {
/* If A is below the threshold but B is above it? Update. */
best->p = p;
best->n2 = n2;
best->r2 = r2;
} else if (a >= c && b >= d) {
/* Both are below the limit, so pick the higher n2/(r2*r2) */
if (n2 * best->r2 * best->r2 > best->n2 * r2 * r2) {
best->p = p;
best->n2 = n2;
best->r2 = r2;
}
}
/* Otherwise a < c && b >= d, do nothing */
}
static void
intel_ddi_calculate_wrpll(int clock /* in Hz */,
unsigned *r2_out, unsigned *n2_out, unsigned *p_out)
{
uint64_t freq2k;
unsigned p, n2, r2;
struct wrpll_rnp best = { 0, 0, 0 };
unsigned budget;
freq2k = clock / 100;
budget = wrpll_get_budget_for_freq(clock);
/* Special case handling for 540 pixel clock: bypass WR PLL entirely
* and directly pass the LC PLL to it. */
if (freq2k == 5400000) {
*n2_out = 2;
*p_out = 1;
*r2_out = 2;
return;
}
/*
* Ref = LC_FREQ / R, where Ref is the actual reference input seen by
* the WR PLL.
*
* We want R so that REF_MIN <= Ref <= REF_MAX.
* Injecting R2 = 2 * R gives:
* REF_MAX * r2 > LC_FREQ * 2 and
* REF_MIN * r2 < LC_FREQ * 2
*
* Which means the desired boundaries for r2 are:
* LC_FREQ * 2 / REF_MAX < r2 < LC_FREQ * 2 / REF_MIN
*
*/
for (r2 = LC_FREQ * 2 / REF_MAX + 1;
r2 <= LC_FREQ * 2 / REF_MIN;
r2++) {
/*
* VCO = N * Ref, that is: VCO = N * LC_FREQ / R
*
* Once again we want VCO_MIN <= VCO <= VCO_MAX.
* Injecting R2 = 2 * R and N2 = 2 * N, we get:
* VCO_MAX * r2 > n2 * LC_FREQ and
* VCO_MIN * r2 < n2 * LC_FREQ)
*
* Which means the desired boundaries for n2 are:
* VCO_MIN * r2 / LC_FREQ < n2 < VCO_MAX * r2 / LC_FREQ
*/
for (n2 = VCO_MIN * r2 / LC_FREQ + 1;
n2 <= VCO_MAX * r2 / LC_FREQ;
n2++) {
for (p = P_MIN; p <= P_MAX; p += P_INC)
wrpll_update_rnp(freq2k, budget,
r2, n2, p, &best);
}
}
*n2_out = best.n2;
*p_out = best.p;
*r2_out = best.r2;
DRM_DEBUG_KMS("WRPLL: %dHz refresh rate with p=%d, n2=%d r2=%d\n",
clock, *p_out, *n2_out, *r2_out);
}
bool intel_ddi_pll_mode_set(struct drm_crtc *crtc, int clock)
{
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
struct drm_encoder *encoder = &intel_encoder->base;
struct drm_i915_private *dev_priv = crtc->dev->dev_private;
struct intel_ddi_plls *plls = &dev_priv->ddi_plls;
int type = intel_encoder->type;
enum pipe pipe = intel_crtc->pipe;
uint32_t reg, val;
/* TODO: reuse PLLs when possible (compare values) */
intel_ddi_put_crtc_pll(crtc);
if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
switch (intel_dp->link_bw) {
case DP_LINK_BW_1_62:
intel_crtc->ddi_pll_sel = PORT_CLK_SEL_LCPLL_810;
break;
case DP_LINK_BW_2_7:
intel_crtc->ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350;
break;
case DP_LINK_BW_5_4:
intel_crtc->ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700;
break;
default:
DRM_ERROR("Link bandwidth %d unsupported\n",
intel_dp->link_bw);
return false;
}
/* We don't need to turn any PLL on because we'll use LCPLL. */
return true;
} else if (type == INTEL_OUTPUT_HDMI) {
unsigned p, n2, r2;
if (plls->wrpll1_refcount == 0) {
DRM_DEBUG_KMS("Using WRPLL 1 on pipe %c\n",
pipe_name(pipe));
plls->wrpll1_refcount++;
reg = WRPLL_CTL1;
intel_crtc->ddi_pll_sel = PORT_CLK_SEL_WRPLL1;
} else if (plls->wrpll2_refcount == 0) {
DRM_DEBUG_KMS("Using WRPLL 2 on pipe %c\n",
pipe_name(pipe));
plls->wrpll2_refcount++;
reg = WRPLL_CTL2;
intel_crtc->ddi_pll_sel = PORT_CLK_SEL_WRPLL2;
} else {
DRM_ERROR("No WRPLLs available!\n");
return false;
}
WARN(I915_READ(reg) & WRPLL_PLL_ENABLE,
"WRPLL already enabled\n");
intel_ddi_calculate_wrpll(clock * 1000, &r2, &n2, &p);
val = WRPLL_PLL_ENABLE | WRPLL_PLL_SELECT_LCPLL_2700 |
WRPLL_DIVIDER_REFERENCE(r2) | WRPLL_DIVIDER_FEEDBACK(n2) |
WRPLL_DIVIDER_POST(p);
} else if (type == INTEL_OUTPUT_ANALOG) {
if (plls->spll_refcount == 0) {
DRM_DEBUG_KMS("Using SPLL on pipe %c\n",
pipe_name(pipe));
plls->spll_refcount++;
reg = SPLL_CTL;
intel_crtc->ddi_pll_sel = PORT_CLK_SEL_SPLL;
} else {
DRM_ERROR("SPLL already in use\n");
return false;
}
WARN(I915_READ(reg) & SPLL_PLL_ENABLE,
"SPLL already enabled\n");
val = SPLL_PLL_ENABLE | SPLL_PLL_FREQ_1350MHz | SPLL_PLL_SSC;
} else {
WARN(1, "Invalid DDI encoder type %d\n", type);
return false;
}
I915_WRITE(reg, val);
udelay(20);
return true;
}
void intel_ddi_set_pipe_settings(struct drm_crtc *crtc)
{
struct drm_i915_private *dev_priv = crtc->dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
int type = intel_encoder->type;
uint32_t temp;
if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
temp = TRANS_MSA_SYNC_CLK;
switch (intel_crtc->config.pipe_bpp) {
case 18:
temp |= TRANS_MSA_6_BPC;
break;
case 24:
temp |= TRANS_MSA_8_BPC;
break;
case 30:
temp |= TRANS_MSA_10_BPC;
break;
case 36:
temp |= TRANS_MSA_12_BPC;
break;
default:
BUG();
}
I915_WRITE(TRANS_MSA_MISC(cpu_transcoder), temp);
}
}
void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc)
{
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
struct drm_encoder *encoder = &intel_encoder->base;
struct drm_i915_private *dev_priv = crtc->dev->dev_private;
enum pipe pipe = intel_crtc->pipe;
enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
enum port port = intel_ddi_get_encoder_port(intel_encoder);
int type = intel_encoder->type;
uint32_t temp;
/* Enable TRANS_DDI_FUNC_CTL for the pipe to work in HDMI mode */
temp = TRANS_DDI_FUNC_ENABLE;
temp |= TRANS_DDI_SELECT_PORT(port);
switch (intel_crtc->config.pipe_bpp) {
case 18:
temp |= TRANS_DDI_BPC_6;
break;
case 24:
temp |= TRANS_DDI_BPC_8;
break;
case 30:
temp |= TRANS_DDI_BPC_10;
break;
case 36:
temp |= TRANS_DDI_BPC_12;
break;
default:
BUG();
}
if (crtc->mode.flags & DRM_MODE_FLAG_PVSYNC)
temp |= TRANS_DDI_PVSYNC;
if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
temp |= TRANS_DDI_PHSYNC;
if (cpu_transcoder == TRANSCODER_EDP) {
switch (pipe) {
case PIPE_A:
/* Can only use the always-on power well for eDP when
* not using the panel fitter, and when not using motion
* blur mitigation (which we don't support). */
if (intel_crtc->config.pch_pfit.size)
temp |= TRANS_DDI_EDP_INPUT_A_ONOFF;
else
temp |= TRANS_DDI_EDP_INPUT_A_ON;
break;
case PIPE_B:
temp |= TRANS_DDI_EDP_INPUT_B_ONOFF;
break;
case PIPE_C:
temp |= TRANS_DDI_EDP_INPUT_C_ONOFF;
break;
default:
BUG();
break;
}
}
if (type == INTEL_OUTPUT_HDMI) {
struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
if (intel_hdmi->has_hdmi_sink)
temp |= TRANS_DDI_MODE_SELECT_HDMI;
else
temp |= TRANS_DDI_MODE_SELECT_DVI;
} else if (type == INTEL_OUTPUT_ANALOG) {
temp |= TRANS_DDI_MODE_SELECT_FDI;
temp |= (intel_crtc->config.fdi_lanes - 1) << 1;
} else if (type == INTEL_OUTPUT_DISPLAYPORT ||
type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
temp |= TRANS_DDI_MODE_SELECT_DP_SST;
temp |= DDI_PORT_WIDTH(intel_dp->lane_count);
} else {
WARN(1, "Invalid encoder type %d for pipe %c\n",
intel_encoder->type, pipe_name(pipe));
}
I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp);
}
void intel_ddi_disable_transcoder_func(struct drm_i915_private *dev_priv,
enum transcoder cpu_transcoder)
{
uint32_t reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
uint32_t val = I915_READ(reg);
val &= ~(TRANS_DDI_FUNC_ENABLE | TRANS_DDI_PORT_MASK);
val |= TRANS_DDI_PORT_NONE;
I915_WRITE(reg, val);
}
bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector)
{
struct drm_device *dev = intel_connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *intel_encoder = intel_connector->encoder;
int type = intel_connector->base.connector_type;
enum port port = intel_ddi_get_encoder_port(intel_encoder);
enum pipe pipe = 0;
enum transcoder cpu_transcoder;
uint32_t tmp;
if (!intel_encoder->get_hw_state(intel_encoder, &pipe))
return false;
if (port == PORT_A)
cpu_transcoder = TRANSCODER_EDP;
else
cpu_transcoder = (enum transcoder) pipe;
tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
switch (tmp & TRANS_DDI_MODE_SELECT_MASK) {
case TRANS_DDI_MODE_SELECT_HDMI:
case TRANS_DDI_MODE_SELECT_DVI:
return (type == DRM_MODE_CONNECTOR_HDMIA);
case TRANS_DDI_MODE_SELECT_DP_SST:
if (type == DRM_MODE_CONNECTOR_eDP)
return true;
case TRANS_DDI_MODE_SELECT_DP_MST:
return (type == DRM_MODE_CONNECTOR_DisplayPort);
case TRANS_DDI_MODE_SELECT_FDI:
return (type == DRM_MODE_CONNECTOR_VGA);
default:
return false;
}
}
bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
enum pipe *pipe)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum port port = intel_ddi_get_encoder_port(encoder);
u32 tmp;
int i;
tmp = I915_READ(DDI_BUF_CTL(port));
if (!(tmp & DDI_BUF_CTL_ENABLE))
return false;
if (port == PORT_A) {
tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
case TRANS_DDI_EDP_INPUT_A_ON:
case TRANS_DDI_EDP_INPUT_A_ONOFF:
*pipe = PIPE_A;
break;
case TRANS_DDI_EDP_INPUT_B_ONOFF:
*pipe = PIPE_B;
break;
case TRANS_DDI_EDP_INPUT_C_ONOFF:
*pipe = PIPE_C;
break;
}
return true;
} else {
for (i = TRANSCODER_A; i <= TRANSCODER_C; i++) {
tmp = I915_READ(TRANS_DDI_FUNC_CTL(i));
if ((tmp & TRANS_DDI_PORT_MASK)
== TRANS_DDI_SELECT_PORT(port)) {
*pipe = i;
return true;
}
}
}
DRM_DEBUG_KMS("No pipe for ddi port %c found\n", port_name(port));
return false;
}
static uint32_t intel_ddi_get_crtc_pll(struct drm_i915_private *dev_priv,
enum pipe pipe)
{
uint32_t temp, ret;
enum port port = I915_MAX_PORTS;
enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
pipe);
int i;
if (cpu_transcoder == TRANSCODER_EDP) {
port = PORT_A;
} else {
temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
temp &= TRANS_DDI_PORT_MASK;
for (i = PORT_B; i <= PORT_E; i++)
if (temp == TRANS_DDI_SELECT_PORT(i))
port = i;
}
if (port == I915_MAX_PORTS) {
WARN(1, "Pipe %c enabled on an unknown port\n",
pipe_name(pipe));
ret = PORT_CLK_SEL_NONE;
} else {
ret = I915_READ(PORT_CLK_SEL(port));
DRM_DEBUG_KMS("Pipe %c connected to port %c using clock "
"0x%08x\n", pipe_name(pipe), port_name(port),
ret);
}
return ret;
}
void intel_ddi_setup_hw_pll_state(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
enum pipe pipe;
struct intel_crtc *intel_crtc;
for_each_pipe(pipe) {
intel_crtc =
to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]);
if (!intel_crtc->active)
continue;
intel_crtc->ddi_pll_sel = intel_ddi_get_crtc_pll(dev_priv,
pipe);
switch (intel_crtc->ddi_pll_sel) {
case PORT_CLK_SEL_SPLL:
dev_priv->ddi_plls.spll_refcount++;
break;
case PORT_CLK_SEL_WRPLL1:
dev_priv->ddi_plls.wrpll1_refcount++;
break;
case PORT_CLK_SEL_WRPLL2:
dev_priv->ddi_plls.wrpll2_refcount++;
break;
}
}
}
void intel_ddi_enable_pipe_clock(struct intel_crtc *intel_crtc)
{
struct drm_crtc *crtc = &intel_crtc->base;
struct drm_i915_private *dev_priv = crtc->dev->dev_private;
struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
enum port port = intel_ddi_get_encoder_port(intel_encoder);
enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
if (cpu_transcoder != TRANSCODER_EDP)
I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
TRANS_CLK_SEL_PORT(port));
}
void intel_ddi_disable_pipe_clock(struct intel_crtc *intel_crtc)
{
struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private;
enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
if (cpu_transcoder != TRANSCODER_EDP)
I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
TRANS_CLK_SEL_DISABLED);
}
static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
{
struct drm_encoder *encoder = &intel_encoder->base;
struct drm_crtc *crtc = encoder->crtc;
struct drm_i915_private *dev_priv = encoder->dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
enum port port = intel_ddi_get_encoder_port(intel_encoder);
int type = intel_encoder->type;
if (type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
ironlake_edp_panel_vdd_on(intel_dp);
ironlake_edp_panel_on(intel_dp);
ironlake_edp_panel_vdd_off(intel_dp, true);
}
WARN_ON(intel_crtc->ddi_pll_sel == PORT_CLK_SEL_NONE);
I915_WRITE(PORT_CLK_SEL(port), intel_crtc->ddi_pll_sel);
if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
intel_dp_start_link_train(intel_dp);
intel_dp_complete_link_train(intel_dp);
if (port != PORT_A)
intel_dp_stop_link_train(intel_dp);
}
}
static void intel_ddi_post_disable(struct intel_encoder *intel_encoder)
{
struct drm_encoder *encoder = &intel_encoder->base;
struct drm_i915_private *dev_priv = encoder->dev->dev_private;
enum port port = intel_ddi_get_encoder_port(intel_encoder);
int type = intel_encoder->type;
uint32_t val;
bool wait = false;
val = I915_READ(DDI_BUF_CTL(port));
if (val & DDI_BUF_CTL_ENABLE) {
val &= ~DDI_BUF_CTL_ENABLE;
I915_WRITE(DDI_BUF_CTL(port), val);
wait = true;
}
val = I915_READ(DP_TP_CTL(port));
val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
val |= DP_TP_CTL_LINK_TRAIN_PAT1;
I915_WRITE(DP_TP_CTL(port), val);
if (wait)
intel_wait_ddi_buf_idle(dev_priv, port);
if (type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
ironlake_edp_panel_vdd_on(intel_dp);
ironlake_edp_panel_off(intel_dp);
}
I915_WRITE(PORT_CLK_SEL(port), PORT_CLK_SEL_NONE);
}
static void intel_enable_ddi(struct intel_encoder *intel_encoder)
{
struct drm_encoder *encoder = &intel_encoder->base;
struct drm_crtc *crtc = encoder->crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum port port = intel_ddi_get_encoder_port(intel_encoder);
int type = intel_encoder->type;
uint32_t tmp;
if (type == INTEL_OUTPUT_HDMI) {
struct intel_digital_port *intel_dig_port =
enc_to_dig_port(encoder);
/* In HDMI/DVI mode, the port width, and swing/emphasis values
* are ignored so nothing special needs to be done besides
* enabling the port.
*/
I915_WRITE(DDI_BUF_CTL(port),
intel_dig_port->port_reversal | DDI_BUF_CTL_ENABLE);
} else if (type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
if (port == PORT_A)
intel_dp_stop_link_train(intel_dp);
ironlake_edp_backlight_on(intel_dp);
}
if (intel_crtc->eld_vld && type != INTEL_OUTPUT_EDP) {
tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
tmp |= ((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * 4));
I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
}
}
static void intel_disable_ddi(struct intel_encoder *intel_encoder)
{
struct drm_encoder *encoder = &intel_encoder->base;
struct drm_crtc *crtc = encoder->crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
int type = intel_encoder->type;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t tmp;
if (intel_crtc->eld_vld && type != INTEL_OUTPUT_EDP) {
tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
tmp &= ~((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) <<
(pipe * 4));
I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
}
if (type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
ironlake_edp_backlight_off(intel_dp);
}
}
int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv)
{
if (I915_READ(HSW_FUSE_STRAP) & HSW_CDCLK_LIMIT)
return 450000;
else if ((I915_READ(LCPLL_CTL) & LCPLL_CLK_FREQ_MASK) ==
LCPLL_CLK_FREQ_450)
return 450000;
else if (IS_ULT(dev_priv->dev))
return 337500;
else
return 540000;
}
void intel_ddi_pll_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t val = I915_READ(LCPLL_CTL);
/* The LCPLL register should be turned on by the BIOS. For now let's
* just check its state and print errors in case something is wrong.
* Don't even try to turn it on.
*/
DRM_DEBUG_KMS("CDCLK running at %dKHz\n",
intel_ddi_get_cdclk_freq(dev_priv));
if (val & LCPLL_CD_SOURCE_FCLK)
DRM_ERROR("CDCLK source is not LCPLL\n");
if (val & LCPLL_PLL_DISABLE)
DRM_ERROR("LCPLL is disabled\n");
}
void intel_ddi_prepare_link_retrain(struct drm_encoder *encoder)
{
struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
struct intel_dp *intel_dp = &intel_dig_port->dp;
struct drm_i915_private *dev_priv = encoder->dev->dev_private;
enum port port = intel_dig_port->port;
uint32_t val;
bool wait = false;
if (I915_READ(DP_TP_CTL(port)) & DP_TP_CTL_ENABLE) {
val = I915_READ(DDI_BUF_CTL(port));
if (val & DDI_BUF_CTL_ENABLE) {
val &= ~DDI_BUF_CTL_ENABLE;
I915_WRITE(DDI_BUF_CTL(port), val);
wait = true;
}
val = I915_READ(DP_TP_CTL(port));
val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
val |= DP_TP_CTL_LINK_TRAIN_PAT1;
I915_WRITE(DP_TP_CTL(port), val);
POSTING_READ(DP_TP_CTL(port));
if (wait)
intel_wait_ddi_buf_idle(dev_priv, port);
}
val = DP_TP_CTL_ENABLE | DP_TP_CTL_MODE_SST |
DP_TP_CTL_LINK_TRAIN_PAT1 | DP_TP_CTL_SCRAMBLE_DISABLE;
if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN)
val |= DP_TP_CTL_ENHANCED_FRAME_ENABLE;
I915_WRITE(DP_TP_CTL(port), val);
POSTING_READ(DP_TP_CTL(port));
intel_dp->DP |= DDI_BUF_CTL_ENABLE;
I915_WRITE(DDI_BUF_CTL(port), intel_dp->DP);
POSTING_READ(DDI_BUF_CTL(port));
udelay(600);
}
void intel_ddi_fdi_disable(struct drm_crtc *crtc)
{
struct drm_i915_private *dev_priv = crtc->dev->dev_private;
struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
uint32_t val;
intel_ddi_post_disable(intel_encoder);
val = I915_READ(_FDI_RXA_CTL);
val &= ~FDI_RX_ENABLE;
I915_WRITE(_FDI_RXA_CTL, val);
val = I915_READ(_FDI_RXA_MISC);
val &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
val |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
I915_WRITE(_FDI_RXA_MISC, val);
val = I915_READ(_FDI_RXA_CTL);
val &= ~FDI_PCDCLK;
I915_WRITE(_FDI_RXA_CTL, val);
val = I915_READ(_FDI_RXA_CTL);
val &= ~FDI_RX_PLL_ENABLE;
I915_WRITE(_FDI_RXA_CTL, val);
}
static void intel_ddi_hot_plug(struct intel_encoder *intel_encoder)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&intel_encoder->base);
int type = intel_encoder->type;
if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP)
intel_dp_check_link_status(intel_dp);
}
static void intel_ddi_get_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
{
struct drm_i915_private *dev_priv = encoder->base.dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder;
u32 temp, flags = 0;
temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
if (temp & TRANS_DDI_PHSYNC)
flags |= DRM_MODE_FLAG_PHSYNC;
else
flags |= DRM_MODE_FLAG_NHSYNC;
if (temp & TRANS_DDI_PVSYNC)
flags |= DRM_MODE_FLAG_PVSYNC;
else
flags |= DRM_MODE_FLAG_NVSYNC;
pipe_config->adjusted_mode.flags |= flags;
pipe_config->pixel_multiplier = 1;
}
static void intel_ddi_destroy(struct drm_encoder *encoder)
{
/* HDMI has nothing special to destroy, so we can go with this. */
intel_dp_encoder_destroy(encoder);
}
static bool intel_ddi_compute_config(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config)
{
int type = encoder->type;
WARN(type == INTEL_OUTPUT_UNKNOWN, "compute_config() on unknown output!\n");
if (type == INTEL_OUTPUT_HDMI)
return intel_hdmi_compute_config(encoder, pipe_config);
else
return intel_dp_compute_config(encoder, pipe_config);
}
static const struct drm_encoder_funcs intel_ddi_funcs = {
.destroy = intel_ddi_destroy,
};
static const struct drm_encoder_helper_funcs intel_ddi_helper_funcs = {
.mode_set = intel_ddi_mode_set,
};
void intel_ddi_init(struct drm_device *dev, enum port port)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_digital_port *intel_dig_port;
struct intel_encoder *intel_encoder;
struct drm_encoder *encoder;
struct intel_connector *hdmi_connector = NULL;
struct intel_connector *dp_connector = NULL;
intel_dig_port = kzalloc(sizeof(struct intel_digital_port), GFP_KERNEL);
if (!intel_dig_port)
return;
dp_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
if (!dp_connector) {
kfree(intel_dig_port);
return;
}
intel_encoder = &intel_dig_port->base;
encoder = &intel_encoder->base;
drm_encoder_init(dev, encoder, &intel_ddi_funcs,
DRM_MODE_ENCODER_TMDS);
drm_encoder_helper_add(encoder, &intel_ddi_helper_funcs);
intel_encoder->compute_config = intel_ddi_compute_config;
intel_encoder->enable = intel_enable_ddi;
intel_encoder->pre_enable = intel_ddi_pre_enable;
intel_encoder->disable = intel_disable_ddi;
intel_encoder->post_disable = intel_ddi_post_disable;
intel_encoder->get_hw_state = intel_ddi_get_hw_state;
intel_encoder->get_config = intel_ddi_get_config;
intel_dig_port->port = port;
intel_dig_port->port_reversal = I915_READ(DDI_BUF_CTL(port)) &
DDI_BUF_PORT_REVERSAL;
intel_dig_port->dp.output_reg = DDI_BUF_CTL(port);
intel_encoder->type = INTEL_OUTPUT_UNKNOWN;
intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
intel_encoder->cloneable = false;
intel_encoder->hot_plug = intel_ddi_hot_plug;
intel_dp_init_connector(intel_dig_port, dp_connector);
if (intel_encoder->type != INTEL_OUTPUT_EDP) {
hdmi_connector = kzalloc(sizeof(struct intel_connector),
GFP_KERNEL);
if (!hdmi_connector) {
return;
}
intel_dig_port->hdmi.hdmi_reg = DDI_BUF_CTL(port);
intel_hdmi_init_connector(intel_dig_port, hdmi_connector);
}
}
View git blame Copy permalink