![Axel Lin](/assets/img/avatar_default.png)
This patch converts the drivers in drivers/rtc/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Ben Dooks <ben@simtec.co.uk> Cc: John Stultz <john.stultz@linaro.org> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
444 lines
12 KiB
C
444 lines
12 KiB
C
/*
|
|
* Real Time Clock interface for StrongARM SA1x00 and XScale PXA2xx
|
|
*
|
|
* Copyright (c) 2000 Nils Faerber
|
|
*
|
|
* Based on rtc.c by Paul Gortmaker
|
|
*
|
|
* Original Driver by Nils Faerber <nils@kernelconcepts.de>
|
|
*
|
|
* Modifications from:
|
|
* CIH <cih@coventive.com>
|
|
* Nicolas Pitre <nico@fluxnic.net>
|
|
* Andrew Christian <andrew.christian@hp.com>
|
|
*
|
|
* Converted to the RTC subsystem and Driver Model
|
|
* by Richard Purdie <rpurdie@rpsys.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/init.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/irq.h>
|
|
|
|
#define RTC_DEF_DIVIDER (32768 - 1)
|
|
#define RTC_DEF_TRIM 0
|
|
#define RTC_FREQ 1024
|
|
|
|
#define RCNR 0x00 /* RTC Count Register */
|
|
#define RTAR 0x04 /* RTC Alarm Register */
|
|
#define RTSR 0x08 /* RTC Status Register */
|
|
#define RTTR 0x0c /* RTC Timer Trim Register */
|
|
|
|
#define RTSR_HZE (1 << 3) /* HZ interrupt enable */
|
|
#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */
|
|
#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */
|
|
#define RTSR_AL (1 << 0) /* RTC alarm detected */
|
|
|
|
#define rtc_readl(sa1100_rtc, reg) \
|
|
readl_relaxed((sa1100_rtc)->base + (reg))
|
|
#define rtc_writel(sa1100_rtc, reg, value) \
|
|
writel_relaxed((value), (sa1100_rtc)->base + (reg))
|
|
|
|
struct sa1100_rtc {
|
|
struct resource *ress;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
int irq_1Hz;
|
|
int irq_Alrm;
|
|
struct rtc_device *rtc;
|
|
spinlock_t lock; /* Protects this structure */
|
|
};
|
|
/*
|
|
* Calculate the next alarm time given the requested alarm time mask
|
|
* and the current time.
|
|
*/
|
|
static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now,
|
|
struct rtc_time *alrm)
|
|
{
|
|
unsigned long next_time;
|
|
unsigned long now_time;
|
|
|
|
next->tm_year = now->tm_year;
|
|
next->tm_mon = now->tm_mon;
|
|
next->tm_mday = now->tm_mday;
|
|
next->tm_hour = alrm->tm_hour;
|
|
next->tm_min = alrm->tm_min;
|
|
next->tm_sec = alrm->tm_sec;
|
|
|
|
rtc_tm_to_time(now, &now_time);
|
|
rtc_tm_to_time(next, &next_time);
|
|
|
|
if (next_time < now_time) {
|
|
/* Advance one day */
|
|
next_time += 60 * 60 * 24;
|
|
rtc_time_to_tm(next_time, next);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev_id);
|
|
struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev);
|
|
unsigned int rtsr;
|
|
unsigned long events = 0;
|
|
|
|
spin_lock(&sa1100_rtc->lock);
|
|
|
|
/* clear interrupt sources */
|
|
rtsr = rtc_readl(sa1100_rtc, RTSR);
|
|
rtc_writel(sa1100_rtc, RTSR, 0);
|
|
|
|
/* Fix for a nasty initialization problem the in SA11xx RTSR register.
|
|
* See also the comments in sa1100_rtc_probe(). */
|
|
if (rtsr & (RTSR_ALE | RTSR_HZE)) {
|
|
/* This is the original code, before there was the if test
|
|
* above. This code does not clear interrupts that were not
|
|
* enabled. */
|
|
rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ) & (rtsr >> 2));
|
|
} else {
|
|
/* For some reason, it is possible to enter this routine
|
|
* without interruptions enabled, it has been tested with
|
|
* several units (Bug in SA11xx chip?).
|
|
*
|
|
* This situation leads to an infinite "loop" of interrupt
|
|
* routine calling and as a result the processor seems to
|
|
* lock on its first call to open(). */
|
|
rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ));
|
|
}
|
|
|
|
/* clear alarm interrupt if it has occurred */
|
|
if (rtsr & RTSR_AL)
|
|
rtsr &= ~RTSR_ALE;
|
|
rtc_writel(sa1100_rtc, RTSR, rtsr & (RTSR_ALE | RTSR_HZE));
|
|
|
|
/* update irq data & counter */
|
|
if (rtsr & RTSR_AL)
|
|
events |= RTC_AF | RTC_IRQF;
|
|
if (rtsr & RTSR_HZ)
|
|
events |= RTC_UF | RTC_IRQF;
|
|
|
|
rtc_update_irq(sa1100_rtc->rtc, 1, events);
|
|
|
|
spin_unlock(&sa1100_rtc->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int sa1100_rtc_open(struct device *dev)
|
|
{
|
|
struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = request_irq(sa1100_rtc->irq_1Hz, sa1100_rtc_interrupt,
|
|
IRQF_DISABLED, "rtc 1Hz", dev);
|
|
if (ret) {
|
|
dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_1Hz);
|
|
goto fail_ui;
|
|
}
|
|
ret = request_irq(sa1100_rtc->irq_Alrm, sa1100_rtc_interrupt,
|
|
IRQF_DISABLED, "rtc Alrm", dev);
|
|
if (ret) {
|
|
dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_Alrm);
|
|
goto fail_ai;
|
|
}
|
|
sa1100_rtc->rtc->max_user_freq = RTC_FREQ;
|
|
rtc_irq_set_freq(sa1100_rtc->rtc, NULL, RTC_FREQ);
|
|
|
|
return 0;
|
|
|
|
fail_ai:
|
|
free_irq(sa1100_rtc->irq_1Hz, dev);
|
|
fail_ui:
|
|
return ret;
|
|
}
|
|
|
|
static void sa1100_rtc_release(struct device *dev)
|
|
{
|
|
struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
|
|
|
|
spin_lock_irq(&sa1100_rtc->lock);
|
|
rtc_writel(sa1100_rtc, RTSR, 0);
|
|
spin_unlock_irq(&sa1100_rtc->lock);
|
|
|
|
free_irq(sa1100_rtc->irq_Alrm, dev);
|
|
free_irq(sa1100_rtc->irq_1Hz, dev);
|
|
}
|
|
|
|
static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled)
|
|
{
|
|
struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
|
|
unsigned int rtsr;
|
|
|
|
spin_lock_irq(&sa1100_rtc->lock);
|
|
|
|
rtsr = rtc_readl(sa1100_rtc, RTSR);
|
|
if (enabled)
|
|
rtsr |= RTSR_ALE;
|
|
else
|
|
rtsr &= ~RTSR_ALE;
|
|
rtc_writel(sa1100_rtc, RTSR, rtsr);
|
|
|
|
spin_unlock_irq(&sa1100_rtc->lock);
|
|
return 0;
|
|
}
|
|
|
|
static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
|
|
|
|
rtc_time_to_tm(rtc_readl(sa1100_rtc, RCNR), tm);
|
|
return 0;
|
|
}
|
|
|
|
static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm)
|
|
{
|
|
struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
|
|
unsigned long time;
|
|
int ret;
|
|
|
|
ret = rtc_tm_to_time(tm, &time);
|
|
if (ret == 0)
|
|
rtc_writel(sa1100_rtc, RCNR, time);
|
|
return ret;
|
|
}
|
|
|
|
static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
|
|
unsigned long time;
|
|
unsigned int rtsr;
|
|
|
|
time = rtc_readl(sa1100_rtc, RCNR);
|
|
rtc_time_to_tm(time, &alrm->time);
|
|
rtsr = rtc_readl(sa1100_rtc, RTSR);
|
|
alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0;
|
|
alrm->pending = (rtsr & RTSR_AL) ? 1 : 0;
|
|
return 0;
|
|
}
|
|
|
|
static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
|
|
{
|
|
struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
|
|
struct rtc_time now_tm, alarm_tm;
|
|
unsigned long time, alarm;
|
|
unsigned int rtsr;
|
|
|
|
spin_lock_irq(&sa1100_rtc->lock);
|
|
|
|
time = rtc_readl(sa1100_rtc, RCNR);
|
|
rtc_time_to_tm(time, &now_tm);
|
|
rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time);
|
|
rtc_tm_to_time(&alarm_tm, &alarm);
|
|
rtc_writel(sa1100_rtc, RTAR, alarm);
|
|
|
|
rtsr = rtc_readl(sa1100_rtc, RTSR);
|
|
if (alrm->enabled)
|
|
rtsr |= RTSR_ALE;
|
|
else
|
|
rtsr &= ~RTSR_ALE;
|
|
rtc_writel(sa1100_rtc, RTSR, rtsr);
|
|
|
|
spin_unlock_irq(&sa1100_rtc->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
|
|
{
|
|
struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
|
|
|
|
seq_printf(seq, "trim/divider\t\t: 0x%08x\n",
|
|
rtc_readl(sa1100_rtc, RTTR));
|
|
seq_printf(seq, "RTSR\t\t\t: 0x%08x\n",
|
|
rtc_readl(sa1100_rtc, RTSR));
|
|
return 0;
|
|
}
|
|
|
|
static const struct rtc_class_ops sa1100_rtc_ops = {
|
|
.open = sa1100_rtc_open,
|
|
.release = sa1100_rtc_release,
|
|
.read_time = sa1100_rtc_read_time,
|
|
.set_time = sa1100_rtc_set_time,
|
|
.read_alarm = sa1100_rtc_read_alarm,
|
|
.set_alarm = sa1100_rtc_set_alarm,
|
|
.proc = sa1100_rtc_proc,
|
|
.alarm_irq_enable = sa1100_rtc_alarm_irq_enable,
|
|
};
|
|
|
|
static int sa1100_rtc_probe(struct platform_device *pdev)
|
|
{
|
|
struct sa1100_rtc *sa1100_rtc;
|
|
unsigned int rttr;
|
|
int ret;
|
|
|
|
sa1100_rtc = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL);
|
|
if (!sa1100_rtc)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init(&sa1100_rtc->lock);
|
|
platform_set_drvdata(pdev, sa1100_rtc);
|
|
|
|
ret = -ENXIO;
|
|
sa1100_rtc->ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!sa1100_rtc->ress) {
|
|
dev_err(&pdev->dev, "No I/O memory resource defined\n");
|
|
goto err_ress;
|
|
}
|
|
|
|
sa1100_rtc->irq_1Hz = platform_get_irq(pdev, 0);
|
|
if (sa1100_rtc->irq_1Hz < 0) {
|
|
dev_err(&pdev->dev, "No 1Hz IRQ resource defined\n");
|
|
goto err_ress;
|
|
}
|
|
sa1100_rtc->irq_Alrm = platform_get_irq(pdev, 1);
|
|
if (sa1100_rtc->irq_Alrm < 0) {
|
|
dev_err(&pdev->dev, "No alarm IRQ resource defined\n");
|
|
goto err_ress;
|
|
}
|
|
|
|
ret = -ENOMEM;
|
|
sa1100_rtc->base = ioremap(sa1100_rtc->ress->start,
|
|
resource_size(sa1100_rtc->ress));
|
|
if (!sa1100_rtc->base) {
|
|
dev_err(&pdev->dev, "Unable to map pxa RTC I/O memory\n");
|
|
goto err_map;
|
|
}
|
|
|
|
sa1100_rtc->clk = clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(sa1100_rtc->clk)) {
|
|
dev_err(&pdev->dev, "failed to find rtc clock source\n");
|
|
ret = PTR_ERR(sa1100_rtc->clk);
|
|
goto err_clk;
|
|
}
|
|
clk_prepare(sa1100_rtc->clk);
|
|
clk_enable(sa1100_rtc->clk);
|
|
|
|
/*
|
|
* According to the manual we should be able to let RTTR be zero
|
|
* and then a default diviser for a 32.768KHz clock is used.
|
|
* Apparently this doesn't work, at least for my SA1110 rev 5.
|
|
* If the clock divider is uninitialized then reset it to the
|
|
* default value to get the 1Hz clock.
|
|
*/
|
|
if (rtc_readl(sa1100_rtc, RTTR) == 0) {
|
|
rttr = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
|
|
rtc_writel(sa1100_rtc, RTTR, rttr);
|
|
dev_warn(&pdev->dev, "warning: initializing default clock"
|
|
" divider/trim value\n");
|
|
/* The current RTC value probably doesn't make sense either */
|
|
rtc_writel(sa1100_rtc, RCNR, 0);
|
|
}
|
|
|
|
device_init_wakeup(&pdev->dev, 1);
|
|
|
|
sa1100_rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
|
|
&sa1100_rtc_ops, THIS_MODULE);
|
|
if (IS_ERR(sa1100_rtc->rtc)) {
|
|
dev_err(&pdev->dev, "Failed to register RTC device -> %d\n",
|
|
ret);
|
|
goto err_rtc_reg;
|
|
}
|
|
/* Fix for a nasty initialization problem the in SA11xx RTSR register.
|
|
* See also the comments in sa1100_rtc_interrupt().
|
|
*
|
|
* Sometimes bit 1 of the RTSR (RTSR_HZ) will wake up 1, which means an
|
|
* interrupt pending, even though interrupts were never enabled.
|
|
* In this case, this bit it must be reset before enabling
|
|
* interruptions to avoid a nonexistent interrupt to occur.
|
|
*
|
|
* In principle, the same problem would apply to bit 0, although it has
|
|
* never been observed to happen.
|
|
*
|
|
* This issue is addressed both here and in sa1100_rtc_interrupt().
|
|
* If the issue is not addressed here, in the times when the processor
|
|
* wakes up with the bit set there will be one spurious interrupt.
|
|
*
|
|
* The issue is also dealt with in sa1100_rtc_interrupt() to be on the
|
|
* safe side, once the condition that lead to this strange
|
|
* initialization is unknown and could in principle happen during
|
|
* normal processing.
|
|
*
|
|
* Notice that clearing bit 1 and 0 is accomplished by writting ONES to
|
|
* the corresponding bits in RTSR. */
|
|
rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ));
|
|
|
|
return 0;
|
|
|
|
err_rtc_reg:
|
|
err_clk:
|
|
iounmap(sa1100_rtc->base);
|
|
err_ress:
|
|
err_map:
|
|
kfree(sa1100_rtc);
|
|
return ret;
|
|
}
|
|
|
|
static int sa1100_rtc_remove(struct platform_device *pdev)
|
|
{
|
|
struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev);
|
|
|
|
rtc_device_unregister(sa1100_rtc->rtc);
|
|
clk_disable(sa1100_rtc->clk);
|
|
clk_unprepare(sa1100_rtc->clk);
|
|
iounmap(sa1100_rtc->base);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int sa1100_rtc_suspend(struct device *dev)
|
|
{
|
|
struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
|
|
|
|
if (device_may_wakeup(dev))
|
|
enable_irq_wake(sa1100_rtc->irq_Alrm);
|
|
return 0;
|
|
}
|
|
|
|
static int sa1100_rtc_resume(struct device *dev)
|
|
{
|
|
struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev);
|
|
|
|
if (device_may_wakeup(dev))
|
|
disable_irq_wake(sa1100_rtc->irq_Alrm);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops sa1100_rtc_pm_ops = {
|
|
.suspend = sa1100_rtc_suspend,
|
|
.resume = sa1100_rtc_resume,
|
|
};
|
|
#endif
|
|
|
|
static struct platform_driver sa1100_rtc_driver = {
|
|
.probe = sa1100_rtc_probe,
|
|
.remove = sa1100_rtc_remove,
|
|
.driver = {
|
|
.name = "sa1100-rtc",
|
|
#ifdef CONFIG_PM
|
|
.pm = &sa1100_rtc_pm_ops,
|
|
#endif
|
|
},
|
|
};
|
|
|
|
module_platform_driver(sa1100_rtc_driver);
|
|
|
|
MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
|
|
MODULE_DESCRIPTION("SA11x0/PXA2xx Realtime Clock Driver (RTC)");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:sa1100-rtc");
|