![David S. Miller](/assets/img/avatar_default.png)
Fully unify all of the DMA ops so that subordinate bus types to the DMA operation providers (such as ebus, isa, of_device) can work transparently. Basically, we just make sure that for every system device we create, the dev->archdata 'iommu' and 'stc' fields are filled in. Then we have two platform variants of the DMA ops, one for SUN4U which actually programs the real hardware, and one for SUN4V which makes hypervisor calls. This also fixes the crashes in parport_pc on sparc64, reported by Meelis Roos. Signed-off-by: David S. Miller <davem@davemloft.net>
1080 lines
37 KiB
C
1080 lines
37 KiB
C
/* pci_psycho.c: PSYCHO/U2P specific PCI controller support.
|
|
*
|
|
* Copyright (C) 1997, 1998, 1999, 2007 David S. Miller (davem@davemloft.net)
|
|
* Copyright (C) 1998, 1999 Eddie C. Dost (ecd@skynet.be)
|
|
* Copyright (C) 1999 Jakub Jelinek (jakub@redhat.com)
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <asm/iommu.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/starfire.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/of_device.h>
|
|
#include <asm/oplib.h>
|
|
|
|
#include "pci_impl.h"
|
|
#include "iommu_common.h"
|
|
|
|
/* All PSYCHO registers are 64-bits. The following accessor
|
|
* routines are how they are accessed. The REG parameter
|
|
* is a physical address.
|
|
*/
|
|
#define psycho_read(__reg) \
|
|
({ u64 __ret; \
|
|
__asm__ __volatile__("ldxa [%1] %2, %0" \
|
|
: "=r" (__ret) \
|
|
: "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \
|
|
: "memory"); \
|
|
__ret; \
|
|
})
|
|
#define psycho_write(__reg, __val) \
|
|
__asm__ __volatile__("stxa %0, [%1] %2" \
|
|
: /* no outputs */ \
|
|
: "r" (__val), "r" (__reg), \
|
|
"i" (ASI_PHYS_BYPASS_EC_E) \
|
|
: "memory")
|
|
|
|
/* Misc. PSYCHO PCI controller register offsets and definitions. */
|
|
#define PSYCHO_CONTROL 0x0010UL
|
|
#define PSYCHO_CONTROL_IMPL 0xf000000000000000UL /* Implementation of this PSYCHO*/
|
|
#define PSYCHO_CONTROL_VER 0x0f00000000000000UL /* Version of this PSYCHO */
|
|
#define PSYCHO_CONTROL_MID 0x00f8000000000000UL /* UPA Module ID of PSYCHO */
|
|
#define PSYCHO_CONTROL_IGN 0x0007c00000000000UL /* Interrupt Group Number */
|
|
#define PSYCHO_CONTROL_RESV 0x00003ffffffffff0UL /* Reserved */
|
|
#define PSYCHO_CONTROL_APCKEN 0x0000000000000008UL /* Address Parity Check Enable */
|
|
#define PSYCHO_CONTROL_APERR 0x0000000000000004UL /* Incoming System Addr Parerr */
|
|
#define PSYCHO_CONTROL_IAP 0x0000000000000002UL /* Invert UPA Parity */
|
|
#define PSYCHO_CONTROL_MODE 0x0000000000000001UL /* PSYCHO clock mode */
|
|
#define PSYCHO_PCIA_CTRL 0x2000UL
|
|
#define PSYCHO_PCIB_CTRL 0x4000UL
|
|
#define PSYCHO_PCICTRL_RESV1 0xfffffff000000000UL /* Reserved */
|
|
#define PSYCHO_PCICTRL_SBH_ERR 0x0000000800000000UL /* Streaming byte hole error */
|
|
#define PSYCHO_PCICTRL_SERR 0x0000000400000000UL /* SERR signal asserted */
|
|
#define PSYCHO_PCICTRL_SPEED 0x0000000200000000UL /* PCI speed (1 is U2P clock) */
|
|
#define PSYCHO_PCICTRL_RESV2 0x00000001ffc00000UL /* Reserved */
|
|
#define PSYCHO_PCICTRL_ARB_PARK 0x0000000000200000UL /* PCI arbitration parking */
|
|
#define PSYCHO_PCICTRL_RESV3 0x00000000001ff800UL /* Reserved */
|
|
#define PSYCHO_PCICTRL_SBH_INT 0x0000000000000400UL /* Streaming byte hole int enab */
|
|
#define PSYCHO_PCICTRL_WEN 0x0000000000000200UL /* Power Mgmt Wake Enable */
|
|
#define PSYCHO_PCICTRL_EEN 0x0000000000000100UL /* PCI Error Interrupt Enable */
|
|
#define PSYCHO_PCICTRL_RESV4 0x00000000000000c0UL /* Reserved */
|
|
#define PSYCHO_PCICTRL_AEN 0x000000000000003fUL /* PCI DVMA Arbitration Enable */
|
|
|
|
/* U2P Programmer's Manual, page 13-55, configuration space
|
|
* address format:
|
|
*
|
|
* 32 24 23 16 15 11 10 8 7 2 1 0
|
|
* ---------------------------------------------------------
|
|
* |0 0 0 0 0 0 0 0 1| bus | device | function | reg | 0 0 |
|
|
* ---------------------------------------------------------
|
|
*/
|
|
#define PSYCHO_CONFIG_BASE(PBM) \
|
|
((PBM)->config_space | (1UL << 24))
|
|
#define PSYCHO_CONFIG_ENCODE(BUS, DEVFN, REG) \
|
|
(((unsigned long)(BUS) << 16) | \
|
|
((unsigned long)(DEVFN) << 8) | \
|
|
((unsigned long)(REG)))
|
|
|
|
static void *psycho_pci_config_mkaddr(struct pci_pbm_info *pbm,
|
|
unsigned char bus,
|
|
unsigned int devfn,
|
|
int where)
|
|
{
|
|
if (!pbm)
|
|
return NULL;
|
|
return (void *)
|
|
(PSYCHO_CONFIG_BASE(pbm) |
|
|
PSYCHO_CONFIG_ENCODE(bus, devfn, where));
|
|
}
|
|
|
|
/* PSYCHO error handling support. */
|
|
enum psycho_error_type {
|
|
UE_ERR, CE_ERR, PCI_ERR
|
|
};
|
|
|
|
/* Helper function of IOMMU error checking, which checks out
|
|
* the state of the streaming buffers. The IOMMU lock is
|
|
* held when this is called.
|
|
*
|
|
* For the PCI error case we know which PBM (and thus which
|
|
* streaming buffer) caused the error, but for the uncorrectable
|
|
* error case we do not. So we always check both streaming caches.
|
|
*/
|
|
#define PSYCHO_STRBUF_CONTROL_A 0x2800UL
|
|
#define PSYCHO_STRBUF_CONTROL_B 0x4800UL
|
|
#define PSYCHO_STRBUF_CTRL_LPTR 0x00000000000000f0UL /* LRU Lock Pointer */
|
|
#define PSYCHO_STRBUF_CTRL_LENAB 0x0000000000000008UL /* LRU Lock Enable */
|
|
#define PSYCHO_STRBUF_CTRL_RRDIS 0x0000000000000004UL /* Rerun Disable */
|
|
#define PSYCHO_STRBUF_CTRL_DENAB 0x0000000000000002UL /* Diagnostic Mode Enable */
|
|
#define PSYCHO_STRBUF_CTRL_ENAB 0x0000000000000001UL /* Streaming Buffer Enable */
|
|
#define PSYCHO_STRBUF_FLUSH_A 0x2808UL
|
|
#define PSYCHO_STRBUF_FLUSH_B 0x4808UL
|
|
#define PSYCHO_STRBUF_FSYNC_A 0x2810UL
|
|
#define PSYCHO_STRBUF_FSYNC_B 0x4810UL
|
|
#define PSYCHO_STC_DATA_A 0xb000UL
|
|
#define PSYCHO_STC_DATA_B 0xc000UL
|
|
#define PSYCHO_STC_ERR_A 0xb400UL
|
|
#define PSYCHO_STC_ERR_B 0xc400UL
|
|
#define PSYCHO_STCERR_WRITE 0x0000000000000002UL /* Write Error */
|
|
#define PSYCHO_STCERR_READ 0x0000000000000001UL /* Read Error */
|
|
#define PSYCHO_STC_TAG_A 0xb800UL
|
|
#define PSYCHO_STC_TAG_B 0xc800UL
|
|
#define PSYCHO_STCTAG_PPN 0x0fffffff00000000UL /* Physical Page Number */
|
|
#define PSYCHO_STCTAG_VPN 0x00000000ffffe000UL /* Virtual Page Number */
|
|
#define PSYCHO_STCTAG_VALID 0x0000000000000002UL /* Valid */
|
|
#define PSYCHO_STCTAG_WRITE 0x0000000000000001UL /* Writable */
|
|
#define PSYCHO_STC_LINE_A 0xb900UL
|
|
#define PSYCHO_STC_LINE_B 0xc900UL
|
|
#define PSYCHO_STCLINE_LINDX 0x0000000001e00000UL /* LRU Index */
|
|
#define PSYCHO_STCLINE_SPTR 0x00000000001f8000UL /* Dirty Data Start Pointer */
|
|
#define PSYCHO_STCLINE_LADDR 0x0000000000007f00UL /* Line Address */
|
|
#define PSYCHO_STCLINE_EPTR 0x00000000000000fcUL /* Dirty Data End Pointer */
|
|
#define PSYCHO_STCLINE_VALID 0x0000000000000002UL /* Valid */
|
|
#define PSYCHO_STCLINE_FOFN 0x0000000000000001UL /* Fetch Outstanding / Flush Necessary */
|
|
|
|
static DEFINE_SPINLOCK(stc_buf_lock);
|
|
static unsigned long stc_error_buf[128];
|
|
static unsigned long stc_tag_buf[16];
|
|
static unsigned long stc_line_buf[16];
|
|
|
|
static void __psycho_check_one_stc(struct pci_pbm_info *pbm,
|
|
int is_pbm_a)
|
|
{
|
|
struct strbuf *strbuf = &pbm->stc;
|
|
unsigned long regbase = pbm->controller_regs;
|
|
unsigned long err_base, tag_base, line_base;
|
|
u64 control;
|
|
int i;
|
|
|
|
if (is_pbm_a) {
|
|
err_base = regbase + PSYCHO_STC_ERR_A;
|
|
tag_base = regbase + PSYCHO_STC_TAG_A;
|
|
line_base = regbase + PSYCHO_STC_LINE_A;
|
|
} else {
|
|
err_base = regbase + PSYCHO_STC_ERR_B;
|
|
tag_base = regbase + PSYCHO_STC_TAG_B;
|
|
line_base = regbase + PSYCHO_STC_LINE_B;
|
|
}
|
|
|
|
spin_lock(&stc_buf_lock);
|
|
|
|
/* This is __REALLY__ dangerous. When we put the
|
|
* streaming buffer into diagnostic mode to probe
|
|
* it's tags and error status, we _must_ clear all
|
|
* of the line tag valid bits before re-enabling
|
|
* the streaming buffer. If any dirty data lives
|
|
* in the STC when we do this, we will end up
|
|
* invalidating it before it has a chance to reach
|
|
* main memory.
|
|
*/
|
|
control = psycho_read(strbuf->strbuf_control);
|
|
psycho_write(strbuf->strbuf_control,
|
|
(control | PSYCHO_STRBUF_CTRL_DENAB));
|
|
for (i = 0; i < 128; i++) {
|
|
unsigned long val;
|
|
|
|
val = psycho_read(err_base + (i * 8UL));
|
|
psycho_write(err_base + (i * 8UL), 0UL);
|
|
stc_error_buf[i] = val;
|
|
}
|
|
for (i = 0; i < 16; i++) {
|
|
stc_tag_buf[i] = psycho_read(tag_base + (i * 8UL));
|
|
stc_line_buf[i] = psycho_read(line_base + (i * 8UL));
|
|
psycho_write(tag_base + (i * 8UL), 0UL);
|
|
psycho_write(line_base + (i * 8UL), 0UL);
|
|
}
|
|
|
|
/* OK, state is logged, exit diagnostic mode. */
|
|
psycho_write(strbuf->strbuf_control, control);
|
|
|
|
for (i = 0; i < 16; i++) {
|
|
int j, saw_error, first, last;
|
|
|
|
saw_error = 0;
|
|
first = i * 8;
|
|
last = first + 8;
|
|
for (j = first; j < last; j++) {
|
|
unsigned long errval = stc_error_buf[j];
|
|
if (errval != 0) {
|
|
saw_error++;
|
|
printk("%s: STC_ERR(%d)[wr(%d)rd(%d)]\n",
|
|
pbm->name,
|
|
j,
|
|
(errval & PSYCHO_STCERR_WRITE) ? 1 : 0,
|
|
(errval & PSYCHO_STCERR_READ) ? 1 : 0);
|
|
}
|
|
}
|
|
if (saw_error != 0) {
|
|
unsigned long tagval = stc_tag_buf[i];
|
|
unsigned long lineval = stc_line_buf[i];
|
|
printk("%s: STC_TAG(%d)[PA(%016lx)VA(%08lx)V(%d)W(%d)]\n",
|
|
pbm->name,
|
|
i,
|
|
((tagval & PSYCHO_STCTAG_PPN) >> 19UL),
|
|
(tagval & PSYCHO_STCTAG_VPN),
|
|
((tagval & PSYCHO_STCTAG_VALID) ? 1 : 0),
|
|
((tagval & PSYCHO_STCTAG_WRITE) ? 1 : 0));
|
|
printk("%s: STC_LINE(%d)[LIDX(%lx)SP(%lx)LADDR(%lx)EP(%lx)"
|
|
"V(%d)FOFN(%d)]\n",
|
|
pbm->name,
|
|
i,
|
|
((lineval & PSYCHO_STCLINE_LINDX) >> 21UL),
|
|
((lineval & PSYCHO_STCLINE_SPTR) >> 15UL),
|
|
((lineval & PSYCHO_STCLINE_LADDR) >> 8UL),
|
|
((lineval & PSYCHO_STCLINE_EPTR) >> 2UL),
|
|
((lineval & PSYCHO_STCLINE_VALID) ? 1 : 0),
|
|
((lineval & PSYCHO_STCLINE_FOFN) ? 1 : 0));
|
|
}
|
|
}
|
|
|
|
spin_unlock(&stc_buf_lock);
|
|
}
|
|
|
|
static void __psycho_check_stc_error(struct pci_pbm_info *pbm,
|
|
unsigned long afsr,
|
|
unsigned long afar,
|
|
enum psycho_error_type type)
|
|
{
|
|
__psycho_check_one_stc(pbm,
|
|
(pbm == &pbm->parent->pbm_A));
|
|
}
|
|
|
|
/* When an Uncorrectable Error or a PCI Error happens, we
|
|
* interrogate the IOMMU state to see if it is the cause.
|
|
*/
|
|
#define PSYCHO_IOMMU_CONTROL 0x0200UL
|
|
#define PSYCHO_IOMMU_CTRL_RESV 0xfffffffff9000000UL /* Reserved */
|
|
#define PSYCHO_IOMMU_CTRL_XLTESTAT 0x0000000006000000UL /* Translation Error Status */
|
|
#define PSYCHO_IOMMU_CTRL_XLTEERR 0x0000000001000000UL /* Translation Error encountered */
|
|
#define PSYCHO_IOMMU_CTRL_LCKEN 0x0000000000800000UL /* Enable translation locking */
|
|
#define PSYCHO_IOMMU_CTRL_LCKPTR 0x0000000000780000UL /* Translation lock pointer */
|
|
#define PSYCHO_IOMMU_CTRL_TSBSZ 0x0000000000070000UL /* TSB Size */
|
|
#define PSYCHO_IOMMU_TSBSZ_1K 0x0000000000000000UL /* TSB Table 1024 8-byte entries */
|
|
#define PSYCHO_IOMMU_TSBSZ_2K 0x0000000000010000UL /* TSB Table 2048 8-byte entries */
|
|
#define PSYCHO_IOMMU_TSBSZ_4K 0x0000000000020000UL /* TSB Table 4096 8-byte entries */
|
|
#define PSYCHO_IOMMU_TSBSZ_8K 0x0000000000030000UL /* TSB Table 8192 8-byte entries */
|
|
#define PSYCHO_IOMMU_TSBSZ_16K 0x0000000000040000UL /* TSB Table 16k 8-byte entries */
|
|
#define PSYCHO_IOMMU_TSBSZ_32K 0x0000000000050000UL /* TSB Table 32k 8-byte entries */
|
|
#define PSYCHO_IOMMU_TSBSZ_64K 0x0000000000060000UL /* TSB Table 64k 8-byte entries */
|
|
#define PSYCHO_IOMMU_TSBSZ_128K 0x0000000000070000UL /* TSB Table 128k 8-byte entries */
|
|
#define PSYCHO_IOMMU_CTRL_RESV2 0x000000000000fff8UL /* Reserved */
|
|
#define PSYCHO_IOMMU_CTRL_TBWSZ 0x0000000000000004UL /* Assumed page size, 0=8k 1=64k */
|
|
#define PSYCHO_IOMMU_CTRL_DENAB 0x0000000000000002UL /* Diagnostic mode enable */
|
|
#define PSYCHO_IOMMU_CTRL_ENAB 0x0000000000000001UL /* IOMMU Enable */
|
|
#define PSYCHO_IOMMU_TSBBASE 0x0208UL
|
|
#define PSYCHO_IOMMU_FLUSH 0x0210UL
|
|
#define PSYCHO_IOMMU_TAG 0xa580UL
|
|
#define PSYCHO_IOMMU_TAG_ERRSTS (0x3UL << 23UL)
|
|
#define PSYCHO_IOMMU_TAG_ERR (0x1UL << 22UL)
|
|
#define PSYCHO_IOMMU_TAG_WRITE (0x1UL << 21UL)
|
|
#define PSYCHO_IOMMU_TAG_STREAM (0x1UL << 20UL)
|
|
#define PSYCHO_IOMMU_TAG_SIZE (0x1UL << 19UL)
|
|
#define PSYCHO_IOMMU_TAG_VPAGE 0x7ffffUL
|
|
#define PSYCHO_IOMMU_DATA 0xa600UL
|
|
#define PSYCHO_IOMMU_DATA_VALID (1UL << 30UL)
|
|
#define PSYCHO_IOMMU_DATA_CACHE (1UL << 28UL)
|
|
#define PSYCHO_IOMMU_DATA_PPAGE 0xfffffffUL
|
|
static void psycho_check_iommu_error(struct pci_pbm_info *pbm,
|
|
unsigned long afsr,
|
|
unsigned long afar,
|
|
enum psycho_error_type type)
|
|
{
|
|
struct iommu *iommu = pbm->iommu;
|
|
unsigned long iommu_tag[16];
|
|
unsigned long iommu_data[16];
|
|
unsigned long flags;
|
|
u64 control;
|
|
int i;
|
|
|
|
spin_lock_irqsave(&iommu->lock, flags);
|
|
control = psycho_read(iommu->iommu_control);
|
|
if (control & PSYCHO_IOMMU_CTRL_XLTEERR) {
|
|
char *type_string;
|
|
|
|
/* Clear the error encountered bit. */
|
|
control &= ~PSYCHO_IOMMU_CTRL_XLTEERR;
|
|
psycho_write(iommu->iommu_control, control);
|
|
|
|
switch((control & PSYCHO_IOMMU_CTRL_XLTESTAT) >> 25UL) {
|
|
case 0:
|
|
type_string = "Protection Error";
|
|
break;
|
|
case 1:
|
|
type_string = "Invalid Error";
|
|
break;
|
|
case 2:
|
|
type_string = "TimeOut Error";
|
|
break;
|
|
case 3:
|
|
default:
|
|
type_string = "ECC Error";
|
|
break;
|
|
};
|
|
printk("%s: IOMMU Error, type[%s]\n",
|
|
pbm->name, type_string);
|
|
|
|
/* Put the IOMMU into diagnostic mode and probe
|
|
* it's TLB for entries with error status.
|
|
*
|
|
* It is very possible for another DVMA to occur
|
|
* while we do this probe, and corrupt the system
|
|
* further. But we are so screwed at this point
|
|
* that we are likely to crash hard anyways, so
|
|
* get as much diagnostic information to the
|
|
* console as we can.
|
|
*/
|
|
psycho_write(iommu->iommu_control,
|
|
control | PSYCHO_IOMMU_CTRL_DENAB);
|
|
for (i = 0; i < 16; i++) {
|
|
unsigned long base = pbm->controller_regs;
|
|
|
|
iommu_tag[i] =
|
|
psycho_read(base + PSYCHO_IOMMU_TAG + (i * 8UL));
|
|
iommu_data[i] =
|
|
psycho_read(base + PSYCHO_IOMMU_DATA + (i * 8UL));
|
|
|
|
/* Now clear out the entry. */
|
|
psycho_write(base + PSYCHO_IOMMU_TAG + (i * 8UL), 0);
|
|
psycho_write(base + PSYCHO_IOMMU_DATA + (i * 8UL), 0);
|
|
}
|
|
|
|
/* Leave diagnostic mode. */
|
|
psycho_write(iommu->iommu_control, control);
|
|
|
|
for (i = 0; i < 16; i++) {
|
|
unsigned long tag, data;
|
|
|
|
tag = iommu_tag[i];
|
|
if (!(tag & PSYCHO_IOMMU_TAG_ERR))
|
|
continue;
|
|
|
|
data = iommu_data[i];
|
|
switch((tag & PSYCHO_IOMMU_TAG_ERRSTS) >> 23UL) {
|
|
case 0:
|
|
type_string = "Protection Error";
|
|
break;
|
|
case 1:
|
|
type_string = "Invalid Error";
|
|
break;
|
|
case 2:
|
|
type_string = "TimeOut Error";
|
|
break;
|
|
case 3:
|
|
default:
|
|
type_string = "ECC Error";
|
|
break;
|
|
};
|
|
printk("%s: IOMMU TAG(%d)[error(%s) wr(%d) str(%d) sz(%dK) vpg(%08lx)]\n",
|
|
pbm->name, i, type_string,
|
|
((tag & PSYCHO_IOMMU_TAG_WRITE) ? 1 : 0),
|
|
((tag & PSYCHO_IOMMU_TAG_STREAM) ? 1 : 0),
|
|
((tag & PSYCHO_IOMMU_TAG_SIZE) ? 64 : 8),
|
|
(tag & PSYCHO_IOMMU_TAG_VPAGE) << IOMMU_PAGE_SHIFT);
|
|
printk("%s: IOMMU DATA(%d)[valid(%d) cache(%d) ppg(%016lx)]\n",
|
|
pbm->name, i,
|
|
((data & PSYCHO_IOMMU_DATA_VALID) ? 1 : 0),
|
|
((data & PSYCHO_IOMMU_DATA_CACHE) ? 1 : 0),
|
|
(data & PSYCHO_IOMMU_DATA_PPAGE) << IOMMU_PAGE_SHIFT);
|
|
}
|
|
}
|
|
__psycho_check_stc_error(pbm, afsr, afar, type);
|
|
spin_unlock_irqrestore(&iommu->lock, flags);
|
|
}
|
|
|
|
/* Uncorrectable Errors. Cause of the error and the address are
|
|
* recorded in the UE_AFSR and UE_AFAR of PSYCHO. They are errors
|
|
* relating to UPA interface transactions.
|
|
*/
|
|
#define PSYCHO_UE_AFSR 0x0030UL
|
|
#define PSYCHO_UEAFSR_PPIO 0x8000000000000000UL /* Primary PIO is cause */
|
|
#define PSYCHO_UEAFSR_PDRD 0x4000000000000000UL /* Primary DVMA read is cause */
|
|
#define PSYCHO_UEAFSR_PDWR 0x2000000000000000UL /* Primary DVMA write is cause */
|
|
#define PSYCHO_UEAFSR_SPIO 0x1000000000000000UL /* Secondary PIO is cause */
|
|
#define PSYCHO_UEAFSR_SDRD 0x0800000000000000UL /* Secondary DVMA read is cause */
|
|
#define PSYCHO_UEAFSR_SDWR 0x0400000000000000UL /* Secondary DVMA write is cause*/
|
|
#define PSYCHO_UEAFSR_RESV1 0x03ff000000000000UL /* Reserved */
|
|
#define PSYCHO_UEAFSR_BMSK 0x0000ffff00000000UL /* Bytemask of failed transfer */
|
|
#define PSYCHO_UEAFSR_DOFF 0x00000000e0000000UL /* Doubleword Offset */
|
|
#define PSYCHO_UEAFSR_MID 0x000000001f000000UL /* UPA MID causing the fault */
|
|
#define PSYCHO_UEAFSR_BLK 0x0000000000800000UL /* Trans was block operation */
|
|
#define PSYCHO_UEAFSR_RESV2 0x00000000007fffffUL /* Reserved */
|
|
#define PSYCHO_UE_AFAR 0x0038UL
|
|
|
|
static irqreturn_t psycho_ue_intr(int irq, void *dev_id)
|
|
{
|
|
struct pci_pbm_info *pbm = dev_id;
|
|
struct pci_controller_info *p = pbm->parent;
|
|
unsigned long afsr_reg = pbm->controller_regs + PSYCHO_UE_AFSR;
|
|
unsigned long afar_reg = pbm->controller_regs + PSYCHO_UE_AFAR;
|
|
unsigned long afsr, afar, error_bits;
|
|
int reported;
|
|
|
|
/* Latch uncorrectable error status. */
|
|
afar = psycho_read(afar_reg);
|
|
afsr = psycho_read(afsr_reg);
|
|
|
|
/* Clear the primary/secondary error status bits. */
|
|
error_bits = afsr &
|
|
(PSYCHO_UEAFSR_PPIO | PSYCHO_UEAFSR_PDRD | PSYCHO_UEAFSR_PDWR |
|
|
PSYCHO_UEAFSR_SPIO | PSYCHO_UEAFSR_SDRD | PSYCHO_UEAFSR_SDWR);
|
|
if (!error_bits)
|
|
return IRQ_NONE;
|
|
psycho_write(afsr_reg, error_bits);
|
|
|
|
/* Log the error. */
|
|
printk("%s: Uncorrectable Error, primary error type[%s]\n",
|
|
pbm->name,
|
|
(((error_bits & PSYCHO_UEAFSR_PPIO) ?
|
|
"PIO" :
|
|
((error_bits & PSYCHO_UEAFSR_PDRD) ?
|
|
"DMA Read" :
|
|
((error_bits & PSYCHO_UEAFSR_PDWR) ?
|
|
"DMA Write" : "???")))));
|
|
printk("%s: bytemask[%04lx] dword_offset[%lx] UPA_MID[%02lx] was_block(%d)\n",
|
|
pbm->name,
|
|
(afsr & PSYCHO_UEAFSR_BMSK) >> 32UL,
|
|
(afsr & PSYCHO_UEAFSR_DOFF) >> 29UL,
|
|
(afsr & PSYCHO_UEAFSR_MID) >> 24UL,
|
|
((afsr & PSYCHO_UEAFSR_BLK) ? 1 : 0));
|
|
printk("%s: UE AFAR [%016lx]\n", pbm->name, afar);
|
|
printk("%s: UE Secondary errors [", pbm->name);
|
|
reported = 0;
|
|
if (afsr & PSYCHO_UEAFSR_SPIO) {
|
|
reported++;
|
|
printk("(PIO)");
|
|
}
|
|
if (afsr & PSYCHO_UEAFSR_SDRD) {
|
|
reported++;
|
|
printk("(DMA Read)");
|
|
}
|
|
if (afsr & PSYCHO_UEAFSR_SDWR) {
|
|
reported++;
|
|
printk("(DMA Write)");
|
|
}
|
|
if (!reported)
|
|
printk("(none)");
|
|
printk("]\n");
|
|
|
|
/* Interrogate both IOMMUs for error status. */
|
|
psycho_check_iommu_error(&p->pbm_A, afsr, afar, UE_ERR);
|
|
psycho_check_iommu_error(&p->pbm_B, afsr, afar, UE_ERR);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Correctable Errors. */
|
|
#define PSYCHO_CE_AFSR 0x0040UL
|
|
#define PSYCHO_CEAFSR_PPIO 0x8000000000000000UL /* Primary PIO is cause */
|
|
#define PSYCHO_CEAFSR_PDRD 0x4000000000000000UL /* Primary DVMA read is cause */
|
|
#define PSYCHO_CEAFSR_PDWR 0x2000000000000000UL /* Primary DVMA write is cause */
|
|
#define PSYCHO_CEAFSR_SPIO 0x1000000000000000UL /* Secondary PIO is cause */
|
|
#define PSYCHO_CEAFSR_SDRD 0x0800000000000000UL /* Secondary DVMA read is cause */
|
|
#define PSYCHO_CEAFSR_SDWR 0x0400000000000000UL /* Secondary DVMA write is cause*/
|
|
#define PSYCHO_CEAFSR_RESV1 0x0300000000000000UL /* Reserved */
|
|
#define PSYCHO_CEAFSR_ESYND 0x00ff000000000000UL /* Syndrome Bits */
|
|
#define PSYCHO_CEAFSR_BMSK 0x0000ffff00000000UL /* Bytemask of failed transfer */
|
|
#define PSYCHO_CEAFSR_DOFF 0x00000000e0000000UL /* Double Offset */
|
|
#define PSYCHO_CEAFSR_MID 0x000000001f000000UL /* UPA MID causing the fault */
|
|
#define PSYCHO_CEAFSR_BLK 0x0000000000800000UL /* Trans was block operation */
|
|
#define PSYCHO_CEAFSR_RESV2 0x00000000007fffffUL /* Reserved */
|
|
#define PSYCHO_CE_AFAR 0x0040UL
|
|
|
|
static irqreturn_t psycho_ce_intr(int irq, void *dev_id)
|
|
{
|
|
struct pci_pbm_info *pbm = dev_id;
|
|
unsigned long afsr_reg = pbm->controller_regs + PSYCHO_CE_AFSR;
|
|
unsigned long afar_reg = pbm->controller_regs + PSYCHO_CE_AFAR;
|
|
unsigned long afsr, afar, error_bits;
|
|
int reported;
|
|
|
|
/* Latch error status. */
|
|
afar = psycho_read(afar_reg);
|
|
afsr = psycho_read(afsr_reg);
|
|
|
|
/* Clear primary/secondary error status bits. */
|
|
error_bits = afsr &
|
|
(PSYCHO_CEAFSR_PPIO | PSYCHO_CEAFSR_PDRD | PSYCHO_CEAFSR_PDWR |
|
|
PSYCHO_CEAFSR_SPIO | PSYCHO_CEAFSR_SDRD | PSYCHO_CEAFSR_SDWR);
|
|
if (!error_bits)
|
|
return IRQ_NONE;
|
|
psycho_write(afsr_reg, error_bits);
|
|
|
|
/* Log the error. */
|
|
printk("%s: Correctable Error, primary error type[%s]\n",
|
|
pbm->name,
|
|
(((error_bits & PSYCHO_CEAFSR_PPIO) ?
|
|
"PIO" :
|
|
((error_bits & PSYCHO_CEAFSR_PDRD) ?
|
|
"DMA Read" :
|
|
((error_bits & PSYCHO_CEAFSR_PDWR) ?
|
|
"DMA Write" : "???")))));
|
|
|
|
/* XXX Use syndrome and afar to print out module string just like
|
|
* XXX UDB CE trap handler does... -DaveM
|
|
*/
|
|
printk("%s: syndrome[%02lx] bytemask[%04lx] dword_offset[%lx] "
|
|
"UPA_MID[%02lx] was_block(%d)\n",
|
|
pbm->name,
|
|
(afsr & PSYCHO_CEAFSR_ESYND) >> 48UL,
|
|
(afsr & PSYCHO_CEAFSR_BMSK) >> 32UL,
|
|
(afsr & PSYCHO_CEAFSR_DOFF) >> 29UL,
|
|
(afsr & PSYCHO_CEAFSR_MID) >> 24UL,
|
|
((afsr & PSYCHO_CEAFSR_BLK) ? 1 : 0));
|
|
printk("%s: CE AFAR [%016lx]\n", pbm->name, afar);
|
|
printk("%s: CE Secondary errors [", pbm->name);
|
|
reported = 0;
|
|
if (afsr & PSYCHO_CEAFSR_SPIO) {
|
|
reported++;
|
|
printk("(PIO)");
|
|
}
|
|
if (afsr & PSYCHO_CEAFSR_SDRD) {
|
|
reported++;
|
|
printk("(DMA Read)");
|
|
}
|
|
if (afsr & PSYCHO_CEAFSR_SDWR) {
|
|
reported++;
|
|
printk("(DMA Write)");
|
|
}
|
|
if (!reported)
|
|
printk("(none)");
|
|
printk("]\n");
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* PCI Errors. They are signalled by the PCI bus module since they
|
|
* are associated with a specific bus segment.
|
|
*/
|
|
#define PSYCHO_PCI_AFSR_A 0x2010UL
|
|
#define PSYCHO_PCI_AFSR_B 0x4010UL
|
|
#define PSYCHO_PCIAFSR_PMA 0x8000000000000000UL /* Primary Master Abort Error */
|
|
#define PSYCHO_PCIAFSR_PTA 0x4000000000000000UL /* Primary Target Abort Error */
|
|
#define PSYCHO_PCIAFSR_PRTRY 0x2000000000000000UL /* Primary Excessive Retries */
|
|
#define PSYCHO_PCIAFSR_PPERR 0x1000000000000000UL /* Primary Parity Error */
|
|
#define PSYCHO_PCIAFSR_SMA 0x0800000000000000UL /* Secondary Master Abort Error */
|
|
#define PSYCHO_PCIAFSR_STA 0x0400000000000000UL /* Secondary Target Abort Error */
|
|
#define PSYCHO_PCIAFSR_SRTRY 0x0200000000000000UL /* Secondary Excessive Retries */
|
|
#define PSYCHO_PCIAFSR_SPERR 0x0100000000000000UL /* Secondary Parity Error */
|
|
#define PSYCHO_PCIAFSR_RESV1 0x00ff000000000000UL /* Reserved */
|
|
#define PSYCHO_PCIAFSR_BMSK 0x0000ffff00000000UL /* Bytemask of failed transfer */
|
|
#define PSYCHO_PCIAFSR_BLK 0x0000000080000000UL /* Trans was block operation */
|
|
#define PSYCHO_PCIAFSR_RESV2 0x0000000040000000UL /* Reserved */
|
|
#define PSYCHO_PCIAFSR_MID 0x000000003e000000UL /* MID causing the error */
|
|
#define PSYCHO_PCIAFSR_RESV3 0x0000000001ffffffUL /* Reserved */
|
|
#define PSYCHO_PCI_AFAR_A 0x2018UL
|
|
#define PSYCHO_PCI_AFAR_B 0x4018UL
|
|
|
|
static irqreturn_t psycho_pcierr_intr_other(struct pci_pbm_info *pbm, int is_pbm_a)
|
|
{
|
|
unsigned long csr_reg, csr, csr_error_bits;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
u16 stat;
|
|
|
|
if (is_pbm_a) {
|
|
csr_reg = pbm->controller_regs + PSYCHO_PCIA_CTRL;
|
|
} else {
|
|
csr_reg = pbm->controller_regs + PSYCHO_PCIB_CTRL;
|
|
}
|
|
csr = psycho_read(csr_reg);
|
|
csr_error_bits =
|
|
csr & (PSYCHO_PCICTRL_SBH_ERR | PSYCHO_PCICTRL_SERR);
|
|
if (csr_error_bits) {
|
|
/* Clear the errors. */
|
|
psycho_write(csr_reg, csr);
|
|
|
|
/* Log 'em. */
|
|
if (csr_error_bits & PSYCHO_PCICTRL_SBH_ERR)
|
|
printk("%s: PCI streaming byte hole error asserted.\n",
|
|
pbm->name);
|
|
if (csr_error_bits & PSYCHO_PCICTRL_SERR)
|
|
printk("%s: PCI SERR signal asserted.\n", pbm->name);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
pci_read_config_word(pbm->pci_bus->self, PCI_STATUS, &stat);
|
|
if (stat & (PCI_STATUS_PARITY |
|
|
PCI_STATUS_SIG_TARGET_ABORT |
|
|
PCI_STATUS_REC_TARGET_ABORT |
|
|
PCI_STATUS_REC_MASTER_ABORT |
|
|
PCI_STATUS_SIG_SYSTEM_ERROR)) {
|
|
printk("%s: PCI bus error, PCI_STATUS[%04x]\n",
|
|
pbm->name, stat);
|
|
pci_write_config_word(pbm->pci_bus->self, PCI_STATUS, 0xffff);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t psycho_pcierr_intr(int irq, void *dev_id)
|
|
{
|
|
struct pci_pbm_info *pbm = dev_id;
|
|
struct pci_controller_info *p = pbm->parent;
|
|
unsigned long afsr_reg, afar_reg;
|
|
unsigned long afsr, afar, error_bits;
|
|
int is_pbm_a, reported;
|
|
|
|
is_pbm_a = (pbm == &pbm->parent->pbm_A);
|
|
if (is_pbm_a) {
|
|
afsr_reg = p->pbm_A.controller_regs + PSYCHO_PCI_AFSR_A;
|
|
afar_reg = p->pbm_A.controller_regs + PSYCHO_PCI_AFAR_A;
|
|
} else {
|
|
afsr_reg = p->pbm_A.controller_regs + PSYCHO_PCI_AFSR_B;
|
|
afar_reg = p->pbm_A.controller_regs + PSYCHO_PCI_AFAR_B;
|
|
}
|
|
|
|
/* Latch error status. */
|
|
afar = psycho_read(afar_reg);
|
|
afsr = psycho_read(afsr_reg);
|
|
|
|
/* Clear primary/secondary error status bits. */
|
|
error_bits = afsr &
|
|
(PSYCHO_PCIAFSR_PMA | PSYCHO_PCIAFSR_PTA |
|
|
PSYCHO_PCIAFSR_PRTRY | PSYCHO_PCIAFSR_PPERR |
|
|
PSYCHO_PCIAFSR_SMA | PSYCHO_PCIAFSR_STA |
|
|
PSYCHO_PCIAFSR_SRTRY | PSYCHO_PCIAFSR_SPERR);
|
|
if (!error_bits)
|
|
return psycho_pcierr_intr_other(pbm, is_pbm_a);
|
|
psycho_write(afsr_reg, error_bits);
|
|
|
|
/* Log the error. */
|
|
printk("%s: PCI Error, primary error type[%s]\n",
|
|
pbm->name,
|
|
(((error_bits & PSYCHO_PCIAFSR_PMA) ?
|
|
"Master Abort" :
|
|
((error_bits & PSYCHO_PCIAFSR_PTA) ?
|
|
"Target Abort" :
|
|
((error_bits & PSYCHO_PCIAFSR_PRTRY) ?
|
|
"Excessive Retries" :
|
|
((error_bits & PSYCHO_PCIAFSR_PPERR) ?
|
|
"Parity Error" : "???"))))));
|
|
printk("%s: bytemask[%04lx] UPA_MID[%02lx] was_block(%d)\n",
|
|
pbm->name,
|
|
(afsr & PSYCHO_PCIAFSR_BMSK) >> 32UL,
|
|
(afsr & PSYCHO_PCIAFSR_MID) >> 25UL,
|
|
(afsr & PSYCHO_PCIAFSR_BLK) ? 1 : 0);
|
|
printk("%s: PCI AFAR [%016lx]\n", pbm->name, afar);
|
|
printk("%s: PCI Secondary errors [", pbm->name);
|
|
reported = 0;
|
|
if (afsr & PSYCHO_PCIAFSR_SMA) {
|
|
reported++;
|
|
printk("(Master Abort)");
|
|
}
|
|
if (afsr & PSYCHO_PCIAFSR_STA) {
|
|
reported++;
|
|
printk("(Target Abort)");
|
|
}
|
|
if (afsr & PSYCHO_PCIAFSR_SRTRY) {
|
|
reported++;
|
|
printk("(Excessive Retries)");
|
|
}
|
|
if (afsr & PSYCHO_PCIAFSR_SPERR) {
|
|
reported++;
|
|
printk("(Parity Error)");
|
|
}
|
|
if (!reported)
|
|
printk("(none)");
|
|
printk("]\n");
|
|
|
|
/* For the error types shown, scan PBM's PCI bus for devices
|
|
* which have logged that error type.
|
|
*/
|
|
|
|
/* If we see a Target Abort, this could be the result of an
|
|
* IOMMU translation error of some sort. It is extremely
|
|
* useful to log this information as usually it indicates
|
|
* a bug in the IOMMU support code or a PCI device driver.
|
|
*/
|
|
if (error_bits & (PSYCHO_PCIAFSR_PTA | PSYCHO_PCIAFSR_STA)) {
|
|
psycho_check_iommu_error(pbm, afsr, afar, PCI_ERR);
|
|
pci_scan_for_target_abort(pbm, pbm->pci_bus);
|
|
}
|
|
if (error_bits & (PSYCHO_PCIAFSR_PMA | PSYCHO_PCIAFSR_SMA))
|
|
pci_scan_for_master_abort(pbm, pbm->pci_bus);
|
|
|
|
/* For excessive retries, PSYCHO/PBM will abort the device
|
|
* and there is no way to specifically check for excessive
|
|
* retries in the config space status registers. So what
|
|
* we hope is that we'll catch it via the master/target
|
|
* abort events.
|
|
*/
|
|
|
|
if (error_bits & (PSYCHO_PCIAFSR_PPERR | PSYCHO_PCIAFSR_SPERR))
|
|
pci_scan_for_parity_error(pbm, pbm->pci_bus);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* XXX What about PowerFail/PowerManagement??? -DaveM */
|
|
#define PSYCHO_ECC_CTRL 0x0020
|
|
#define PSYCHO_ECCCTRL_EE 0x8000000000000000UL /* Enable ECC Checking */
|
|
#define PSYCHO_ECCCTRL_UE 0x4000000000000000UL /* Enable UE Interrupts */
|
|
#define PSYCHO_ECCCTRL_CE 0x2000000000000000UL /* Enable CE INterrupts */
|
|
static void psycho_register_error_handlers(struct pci_pbm_info *pbm)
|
|
{
|
|
struct of_device *op = of_find_device_by_node(pbm->prom_node);
|
|
unsigned long base = pbm->controller_regs;
|
|
u64 tmp;
|
|
int err;
|
|
|
|
if (!op)
|
|
return;
|
|
|
|
/* Psycho interrupt property order is:
|
|
* 0: PCIERR INO for this PBM
|
|
* 1: UE ERR
|
|
* 2: CE ERR
|
|
* 3: POWER FAIL
|
|
* 4: SPARE HARDWARE
|
|
* 5: POWER MANAGEMENT
|
|
*/
|
|
|
|
if (op->num_irqs < 6)
|
|
return;
|
|
|
|
/* We really mean to ignore the return result here. Two
|
|
* PCI controller share the same interrupt numbers and
|
|
* drive the same front-end hardware. Whichever of the
|
|
* two get in here first will register the IRQ handler
|
|
* the second will just error out since we do not pass in
|
|
* IRQF_SHARED.
|
|
*/
|
|
err = request_irq(op->irqs[1], psycho_ue_intr, 0,
|
|
"PSYCHO_UE", pbm);
|
|
err = request_irq(op->irqs[2], psycho_ce_intr, 0,
|
|
"PSYCHO_CE", pbm);
|
|
|
|
/* This one, however, ought not to fail. We can just warn
|
|
* about it since the system can still operate properly even
|
|
* if this fails.
|
|
*/
|
|
err = request_irq(op->irqs[0], psycho_pcierr_intr, 0,
|
|
"PSYCHO_PCIERR", pbm);
|
|
if (err)
|
|
printk(KERN_WARNING "%s: Could not register PCIERR, "
|
|
"err=%d\n", pbm->name, err);
|
|
|
|
/* Enable UE and CE interrupts for controller. */
|
|
psycho_write(base + PSYCHO_ECC_CTRL,
|
|
(PSYCHO_ECCCTRL_EE |
|
|
PSYCHO_ECCCTRL_UE |
|
|
PSYCHO_ECCCTRL_CE));
|
|
|
|
/* Enable PCI Error interrupts and clear error
|
|
* bits for each PBM.
|
|
*/
|
|
tmp = psycho_read(base + PSYCHO_PCIA_CTRL);
|
|
tmp |= (PSYCHO_PCICTRL_SERR |
|
|
PSYCHO_PCICTRL_SBH_ERR |
|
|
PSYCHO_PCICTRL_EEN);
|
|
tmp &= ~(PSYCHO_PCICTRL_SBH_INT);
|
|
psycho_write(base + PSYCHO_PCIA_CTRL, tmp);
|
|
|
|
tmp = psycho_read(base + PSYCHO_PCIB_CTRL);
|
|
tmp |= (PSYCHO_PCICTRL_SERR |
|
|
PSYCHO_PCICTRL_SBH_ERR |
|
|
PSYCHO_PCICTRL_EEN);
|
|
tmp &= ~(PSYCHO_PCICTRL_SBH_INT);
|
|
psycho_write(base + PSYCHO_PCIB_CTRL, tmp);
|
|
}
|
|
|
|
/* PSYCHO boot time probing and initialization. */
|
|
static void pbm_config_busmastering(struct pci_pbm_info *pbm)
|
|
{
|
|
u8 *addr;
|
|
|
|
/* Set cache-line size to 64 bytes, this is actually
|
|
* a nop but I do it for completeness.
|
|
*/
|
|
addr = psycho_pci_config_mkaddr(pbm, pbm->pci_first_busno,
|
|
0, PCI_CACHE_LINE_SIZE);
|
|
pci_config_write8(addr, 64 / sizeof(u32));
|
|
|
|
/* Set PBM latency timer to 64 PCI clocks. */
|
|
addr = psycho_pci_config_mkaddr(pbm, pbm->pci_first_busno,
|
|
0, PCI_LATENCY_TIMER);
|
|
pci_config_write8(addr, 64);
|
|
}
|
|
|
|
static void psycho_scan_bus(struct pci_pbm_info *pbm)
|
|
{
|
|
pbm_config_busmastering(pbm);
|
|
pbm->is_66mhz_capable = 0;
|
|
pbm->pci_bus = pci_scan_one_pbm(pbm);
|
|
|
|
/* After the PCI bus scan is complete, we can register
|
|
* the error interrupt handlers.
|
|
*/
|
|
psycho_register_error_handlers(pbm);
|
|
}
|
|
|
|
static int psycho_iommu_init(struct pci_pbm_info *pbm)
|
|
{
|
|
struct iommu *iommu = pbm->iommu;
|
|
unsigned long i;
|
|
u64 control;
|
|
int err;
|
|
|
|
/* Register addresses. */
|
|
iommu->iommu_control = pbm->controller_regs + PSYCHO_IOMMU_CONTROL;
|
|
iommu->iommu_tsbbase = pbm->controller_regs + PSYCHO_IOMMU_TSBBASE;
|
|
iommu->iommu_flush = pbm->controller_regs + PSYCHO_IOMMU_FLUSH;
|
|
iommu->iommu_tags = iommu->iommu_flush + (0xa580UL - 0x0210UL);
|
|
|
|
/* PSYCHO's IOMMU lacks ctx flushing. */
|
|
iommu->iommu_ctxflush = 0;
|
|
|
|
/* We use the main control register of PSYCHO as the write
|
|
* completion register.
|
|
*/
|
|
iommu->write_complete_reg = pbm->controller_regs + PSYCHO_CONTROL;
|
|
|
|
/*
|
|
* Invalidate TLB Entries.
|
|
*/
|
|
control = psycho_read(pbm->controller_regs + PSYCHO_IOMMU_CONTROL);
|
|
control |= PSYCHO_IOMMU_CTRL_DENAB;
|
|
psycho_write(pbm->controller_regs + PSYCHO_IOMMU_CONTROL, control);
|
|
for(i = 0; i < 16; i++) {
|
|
psycho_write(pbm->controller_regs + PSYCHO_IOMMU_TAG + (i * 8UL), 0);
|
|
psycho_write(pbm->controller_regs + PSYCHO_IOMMU_DATA + (i * 8UL), 0);
|
|
}
|
|
|
|
/* Leave diag mode enabled for full-flushing done
|
|
* in pci_iommu.c
|
|
*/
|
|
err = iommu_table_init(iommu, IO_TSB_SIZE, 0xc0000000, 0xffffffff);
|
|
if (err)
|
|
return err;
|
|
|
|
psycho_write(pbm->controller_regs + PSYCHO_IOMMU_TSBBASE,
|
|
__pa(iommu->page_table));
|
|
|
|
control = psycho_read(pbm->controller_regs + PSYCHO_IOMMU_CONTROL);
|
|
control &= ~(PSYCHO_IOMMU_CTRL_TSBSZ | PSYCHO_IOMMU_CTRL_TBWSZ);
|
|
control |= (PSYCHO_IOMMU_TSBSZ_128K | PSYCHO_IOMMU_CTRL_ENAB);
|
|
psycho_write(pbm->controller_regs + PSYCHO_IOMMU_CONTROL, control);
|
|
|
|
/* If necessary, hook us up for starfire IRQ translations. */
|
|
if (this_is_starfire)
|
|
starfire_hookup(pbm->portid);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define PSYCHO_IRQ_RETRY 0x1a00UL
|
|
#define PSYCHO_PCIA_DIAG 0x2020UL
|
|
#define PSYCHO_PCIB_DIAG 0x4020UL
|
|
#define PSYCHO_PCIDIAG_RESV 0xffffffffffffff80UL /* Reserved */
|
|
#define PSYCHO_PCIDIAG_DRETRY 0x0000000000000040UL /* Disable retry limit */
|
|
#define PSYCHO_PCIDIAG_DISYNC 0x0000000000000020UL /* Disable DMA wr / irq sync */
|
|
#define PSYCHO_PCIDIAG_DDWSYNC 0x0000000000000010UL /* Disable DMA wr / PIO rd sync */
|
|
#define PSYCHO_PCIDIAG_IDDPAR 0x0000000000000008UL /* Invert DMA data parity */
|
|
#define PSYCHO_PCIDIAG_IPDPAR 0x0000000000000004UL /* Invert PIO data parity */
|
|
#define PSYCHO_PCIDIAG_IPAPAR 0x0000000000000002UL /* Invert PIO address parity */
|
|
#define PSYCHO_PCIDIAG_LPBACK 0x0000000000000001UL /* Enable loopback mode */
|
|
|
|
static void psycho_controller_hwinit(struct pci_pbm_info *pbm)
|
|
{
|
|
u64 tmp;
|
|
|
|
psycho_write(pbm->controller_regs + PSYCHO_IRQ_RETRY, 5);
|
|
|
|
/* Enable arbiter for all PCI slots. */
|
|
tmp = psycho_read(pbm->controller_regs + PSYCHO_PCIA_CTRL);
|
|
tmp |= PSYCHO_PCICTRL_AEN;
|
|
psycho_write(pbm->controller_regs + PSYCHO_PCIA_CTRL, tmp);
|
|
|
|
tmp = psycho_read(pbm->controller_regs + PSYCHO_PCIB_CTRL);
|
|
tmp |= PSYCHO_PCICTRL_AEN;
|
|
psycho_write(pbm->controller_regs + PSYCHO_PCIB_CTRL, tmp);
|
|
|
|
/* Disable DMA write / PIO read synchronization on
|
|
* both PCI bus segments.
|
|
* [ U2P Erratum 1243770, STP2223BGA data sheet ]
|
|
*/
|
|
tmp = psycho_read(pbm->controller_regs + PSYCHO_PCIA_DIAG);
|
|
tmp |= PSYCHO_PCIDIAG_DDWSYNC;
|
|
psycho_write(pbm->controller_regs + PSYCHO_PCIA_DIAG, tmp);
|
|
|
|
tmp = psycho_read(pbm->controller_regs + PSYCHO_PCIB_DIAG);
|
|
tmp |= PSYCHO_PCIDIAG_DDWSYNC;
|
|
psycho_write(pbm->controller_regs + PSYCHO_PCIB_DIAG, tmp);
|
|
}
|
|
|
|
static void psycho_pbm_strbuf_init(struct pci_pbm_info *pbm,
|
|
int is_pbm_a)
|
|
{
|
|
unsigned long base = pbm->controller_regs;
|
|
u64 control;
|
|
|
|
if (is_pbm_a) {
|
|
pbm->stc.strbuf_control = base + PSYCHO_STRBUF_CONTROL_A;
|
|
pbm->stc.strbuf_pflush = base + PSYCHO_STRBUF_FLUSH_A;
|
|
pbm->stc.strbuf_fsync = base + PSYCHO_STRBUF_FSYNC_A;
|
|
} else {
|
|
pbm->stc.strbuf_control = base + PSYCHO_STRBUF_CONTROL_B;
|
|
pbm->stc.strbuf_pflush = base + PSYCHO_STRBUF_FLUSH_B;
|
|
pbm->stc.strbuf_fsync = base + PSYCHO_STRBUF_FSYNC_B;
|
|
}
|
|
/* PSYCHO's streaming buffer lacks ctx flushing. */
|
|
pbm->stc.strbuf_ctxflush = 0;
|
|
pbm->stc.strbuf_ctxmatch_base = 0;
|
|
|
|
pbm->stc.strbuf_flushflag = (volatile unsigned long *)
|
|
((((unsigned long)&pbm->stc.__flushflag_buf[0])
|
|
+ 63UL)
|
|
& ~63UL);
|
|
pbm->stc.strbuf_flushflag_pa = (unsigned long)
|
|
__pa(pbm->stc.strbuf_flushflag);
|
|
|
|
/* Enable the streaming buffer. We have to be careful
|
|
* just in case OBP left it with LRU locking enabled.
|
|
*
|
|
* It is possible to control if PBM will be rerun on
|
|
* line misses. Currently I just retain whatever setting
|
|
* OBP left us with. All checks so far show it having
|
|
* a value of zero.
|
|
*/
|
|
#undef PSYCHO_STRBUF_RERUN_ENABLE
|
|
#undef PSYCHO_STRBUF_RERUN_DISABLE
|
|
control = psycho_read(pbm->stc.strbuf_control);
|
|
control |= PSYCHO_STRBUF_CTRL_ENAB;
|
|
control &= ~(PSYCHO_STRBUF_CTRL_LENAB | PSYCHO_STRBUF_CTRL_LPTR);
|
|
#ifdef PSYCHO_STRBUF_RERUN_ENABLE
|
|
control &= ~(PSYCHO_STRBUF_CTRL_RRDIS);
|
|
#else
|
|
#ifdef PSYCHO_STRBUF_RERUN_DISABLE
|
|
control |= PSYCHO_STRBUF_CTRL_RRDIS;
|
|
#endif
|
|
#endif
|
|
psycho_write(pbm->stc.strbuf_control, control);
|
|
|
|
pbm->stc.strbuf_enabled = 1;
|
|
}
|
|
|
|
#define PSYCHO_IOSPACE_A 0x002000000UL
|
|
#define PSYCHO_IOSPACE_B 0x002010000UL
|
|
#define PSYCHO_IOSPACE_SIZE 0x00000ffffUL
|
|
#define PSYCHO_MEMSPACE_A 0x100000000UL
|
|
#define PSYCHO_MEMSPACE_B 0x180000000UL
|
|
#define PSYCHO_MEMSPACE_SIZE 0x07fffffffUL
|
|
|
|
static void psycho_pbm_init(struct pci_controller_info *p,
|
|
struct device_node *dp, int is_pbm_a)
|
|
{
|
|
struct property *prop;
|
|
struct pci_pbm_info *pbm;
|
|
|
|
if (is_pbm_a)
|
|
pbm = &p->pbm_A;
|
|
else
|
|
pbm = &p->pbm_B;
|
|
|
|
pbm->next = pci_pbm_root;
|
|
pci_pbm_root = pbm;
|
|
|
|
pbm->scan_bus = psycho_scan_bus;
|
|
pbm->pci_ops = &sun4u_pci_ops;
|
|
pbm->config_space_reg_bits = 8;
|
|
|
|
pbm->index = pci_num_pbms++;
|
|
|
|
pbm->chip_type = PBM_CHIP_TYPE_PSYCHO;
|
|
pbm->chip_version = 0;
|
|
prop = of_find_property(dp, "version#", NULL);
|
|
if (prop)
|
|
pbm->chip_version = *(int *) prop->value;
|
|
pbm->chip_revision = 0;
|
|
prop = of_find_property(dp, "module-revision#", NULL);
|
|
if (prop)
|
|
pbm->chip_revision = *(int *) prop->value;
|
|
|
|
pbm->parent = p;
|
|
pbm->prom_node = dp;
|
|
pbm->name = dp->full_name;
|
|
|
|
printk("%s: PSYCHO PCI Bus Module ver[%x:%x]\n",
|
|
pbm->name,
|
|
pbm->chip_version, pbm->chip_revision);
|
|
|
|
pci_determine_mem_io_space(pbm);
|
|
|
|
pci_get_pbm_props(pbm);
|
|
|
|
psycho_pbm_strbuf_init(pbm, is_pbm_a);
|
|
}
|
|
|
|
#define PSYCHO_CONFIGSPACE 0x001000000UL
|
|
|
|
void psycho_init(struct device_node *dp, char *model_name)
|
|
{
|
|
struct linux_prom64_registers *pr_regs;
|
|
struct pci_controller_info *p;
|
|
struct pci_pbm_info *pbm;
|
|
struct iommu *iommu;
|
|
struct property *prop;
|
|
u32 upa_portid;
|
|
int is_pbm_a;
|
|
|
|
upa_portid = 0xff;
|
|
prop = of_find_property(dp, "upa-portid", NULL);
|
|
if (prop)
|
|
upa_portid = *(u32 *) prop->value;
|
|
|
|
for (pbm = pci_pbm_root; pbm; pbm = pbm->next) {
|
|
struct pci_controller_info *p = pbm->parent;
|
|
|
|
if (p->pbm_A.portid == upa_portid) {
|
|
is_pbm_a = (p->pbm_A.prom_node == NULL);
|
|
psycho_pbm_init(p, dp, is_pbm_a);
|
|
return;
|
|
}
|
|
}
|
|
|
|
p = kzalloc(sizeof(struct pci_controller_info), GFP_ATOMIC);
|
|
if (!p)
|
|
goto fatal_memory_error;
|
|
iommu = kzalloc(sizeof(struct iommu), GFP_ATOMIC);
|
|
if (!iommu)
|
|
goto fatal_memory_error;
|
|
|
|
p->pbm_A.iommu = p->pbm_B.iommu = iommu;
|
|
|
|
p->pbm_A.portid = upa_portid;
|
|
p->pbm_B.portid = upa_portid;
|
|
|
|
prop = of_find_property(dp, "reg", NULL);
|
|
pr_regs = prop->value;
|
|
|
|
p->pbm_A.controller_regs = pr_regs[2].phys_addr;
|
|
p->pbm_B.controller_regs = pr_regs[2].phys_addr;
|
|
|
|
p->pbm_A.config_space = p->pbm_B.config_space =
|
|
(pr_regs[2].phys_addr + PSYCHO_CONFIGSPACE);
|
|
|
|
/*
|
|
* Psycho's PCI MEM space is mapped to a 2GB aligned area, so
|
|
* we need to adjust our MEM space mask.
|
|
*/
|
|
pci_memspace_mask = 0x7fffffffUL;
|
|
|
|
psycho_controller_hwinit(&p->pbm_A);
|
|
|
|
if (psycho_iommu_init(&p->pbm_A))
|
|
goto fatal_memory_error;
|
|
|
|
is_pbm_a = ((pr_regs[0].phys_addr & 0x6000) == 0x2000);
|
|
psycho_pbm_init(p, dp, is_pbm_a);
|
|
return;
|
|
|
|
fatal_memory_error:
|
|
prom_printf("PSYCHO: Fatal memory allocation error.\n");
|
|
prom_halt();
|
|
}
|