redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/arm/boot/dts/omap3-pandora-common.dtsi
Grazvydas Ignotas f9d50fef4b ARM: OMAP2+: omap3-pandora: add wifi support 
Add wl1251 support via pdata-quirks as it's driver lacks DT
support. MMC3 is marked disabled in DT so that MMC3 instance of
hsmmc driver is probed using platform data with special card init
callback.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-21 04:07:42 -07:00

687 lines
17 KiB
Plaintext
Raw Blame History

/*
* Copyright (C) 2015
* Nikolaus Schaller <hns@goldelico.com>
*
* Common device tree include for OpenPandora devices.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <dt-bindings/input/input.h>
/ {
cpus {
cpu@0 {
cpu0-supply = <&vcc>;
};
};
memory {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512 MB */
};
aliases {
display0 = &lcd;
};
tv: connector@1 {
compatible = "connector-analog-tv";
label = "tv";
port {
tv_connector_in: endpoint {
remote-endpoint = <&venc_out>;
};
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins>;
led@1 {
label = "pandora::sd1";
gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* GPIO_128 */
linux,default-trigger = "mmc0";
default-state = "off";
};
led@2 {
label = "pandora::sd2";
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* GPIO_129 */
linux,default-trigger = "mmc1";
default-state = "off";
};
led@3 {
label = "pandora::bluetooth";
gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>; /* GPIO_158 */
linux,default-trigger = "heartbeat";
default-state = "off";
};
led@4 {
label = "pandora::wifi";
gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>; /* GPIO_159 */
linux,default-trigger = "mmc2";
default-state = "off";
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&button_pins>;
up-button {
label = "up";
linux,code = <KEY_UP>;
gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* GPIO_110 */
gpio-key,wakeup;
};
down-button {
label = "down";
linux,code = <KEY_DOWN>;
gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; /* GPIO_103 */
gpio-key,wakeup;
};
left-button {
label = "left";
linux,code = <KEY_LEFT>;
gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; /* GPIO_96 */
gpio-key,wakeup;
};
right-button {
label = "right";
linux,code = <KEY_RIGHT>;
gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; /* GPIO_98 */
gpio-key,wakeup;
};
pageup-button {
label = "game 1";
linux,code = <KEY_PAGEUP>;
gpios = <&gpio4 13 GPIO_ACTIVE_LOW>; /* GPIO_109 */
gpio-key,wakeup;
};
pagedown-button {
label = "game 3";
linux,code = <KEY_PAGEDOWN>;
gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* GPIO_106 */
gpio-key,wakeup;
};
home-button {
label = "game 4";
linux,code = <KEY_HOME>;
gpios = <&gpio4 5 GPIO_ACTIVE_LOW>; /* GPIO_101 */
gpio-key,wakeup;
};
end-button {
label = "game 2";
linux,code = <KEY_END>;
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* GPIO_111 */
gpio-key,wakeup;
};
right-shift {
label = "l";
linux,code = <KEY_RIGHTSHIFT>;
gpios = <&gpio4 6 GPIO_ACTIVE_LOW>; /* GPIO_102 */
gpio-key,wakeup;
};
kp-plus {
label = "l2";
linux,code = <KEY_KPPLUS>;
gpios = <&gpio4 1 GPIO_ACTIVE_LOW>; /* GPIO_97 */
gpio-key,wakeup;
};
right-ctrl {
label = "r";
linux,code = <KEY_RIGHTCTRL>;
gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; /* GPIO_105 */
gpio-key,wakeup;
};
kp-minus {
label = "r2";
linux,code = <KEY_KPMINUS>;
gpios = <&gpio4 11 GPIO_ACTIVE_LOW>; /* GPIO_107 */
gpio-key,wakeup;
};
left-ctrl {
label = "ctrl";
linux,code = <KEY_LEFTCTRL>;
gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; /* GPIO_104 */
gpio-key,wakeup;
};
menu {
label = "menu";
linux,code = <KEY_MENU>;
gpios = <&gpio4 3 GPIO_ACTIVE_LOW>; /* GPIO_99 */
gpio-key,wakeup;
};
hold {
label = "hold";
linux,code = <KEY_COFFEE>;
gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* GPIO_176 */
gpio-key,wakeup;
};
left-alt {
label = "alt";
linux,code = <KEY_LEFTALT>;
gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>; /* GPIO_100 */
gpio-key,wakeup;
};
lid {
label = "lid";
linux,code = <0x00>; /* SW_LID lid shut */
linux,input-type = <0x05>; /* EV_SW */
gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>; /* GPIO_108 */
};
};
/* HS USB Host PHY on PORT 2 */
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* GPIO_16 */
vcc-supply = <&vaux2>;
};
/* HS USB Host VBUS supply
* disabling this regulator causes current leakage, and LCD flicker
* on earlier (CC) board revisions, so keep it always on */
usb_host_5v: fixed-regulator-usb_host_5v {
compatible = "regulator-fixed";
regulator-name = "usb_host_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
gpio = <&gpio6 4 0>; /* GPIO_164 */
};
/* wg7210 (wifi+bt module) 32k clock buffer */
wg7210_32k: fixed-regulator-wg7210_32k {
compatible = "regulator-fixed";
regulator-name = "wg7210_32k";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
enable-active-high;
gpio = <&twl_gpio 13 GPIO_ACTIVE_HIGH>;
};
};
&omap3_pmx_core {
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat4.sdmmc2_dirdat0 */
OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat5.sdmmc2_dirdat1 */
OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat6.sdmmc2_dircmd */
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE1) /* sdmmc2_dat7.sdmmc2_clkin */
>;
};
dss_dpi_pins: pinmux_dss_dpi_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* GPIO_157 = lcd reset */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
>;
};
led_pins: pinmux_leds_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2154, PIN_OUTPUT | MUX_MODE4) /* GPIO_128 */
OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* GPIO_129 */
OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE4) /* GPIO_158 */
OMAP3_CORE1_IOPAD(0x2192, PIN_OUTPUT | MUX_MODE4) /* GPIO_159 */
>;
};
button_pins: pinmux_button_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE4) /* GPIO_96 */
OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE4) /* GPIO_97 */
OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE4) /* GPIO_98 */
OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE4) /* GPIO_99 */
OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE4) /* GPIO_100 */
OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE4) /* GPIO_101 */
OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE4) /* GPIO_102 */
OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE4) /* GPIO_103 */
OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE4) /* GPIO_104 */
OMAP3_CORE1_IOPAD(0x2122, PIN_INPUT | MUX_MODE4) /* GPIO_105 */
OMAP3_CORE1_IOPAD(0x2124, PIN_INPUT | MUX_MODE4) /* GPIO_106 */
OMAP3_CORE1_IOPAD(0x2126, PIN_INPUT | MUX_MODE4) /* GPIO_107 */
OMAP3_CORE1_IOPAD(0x2128, PIN_INPUT | MUX_MODE4) /* GPIO_108 */
OMAP3_CORE1_IOPAD(0x212a, PIN_INPUT | MUX_MODE4) /* GPIO_109 */
OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT | MUX_MODE4) /* GPIO_110 */
OMAP3_CORE1_IOPAD(0x212e, PIN_INPUT | MUX_MODE4) /* GPIO_111 */
OMAP3_CORE1_IOPAD(0x21d2, PIN_INPUT | MUX_MODE4) /* GPIO_176 */
>;
};
penirq_pins: pinmux_penirq_pins {
pinctrl-single,pins = <
/* here we could enable to wakeup the cpu from suspend by a pen touch */
OMAP3_CORE1_IOPAD(0x210c, PIN_INPUT | MUX_MODE4) /* GPIO_94 */
>;
};
};
&omap3_pmx_core2 {
/* define in CPU specific file that includes this one
* use either OMAP3430_CORE2_IOPAD() or OMAP3630_CORE2_IOPAD()
*/
};
&i2c1 {
clock-frequency = <2600000>;
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
twl_power: power {
compatible = "ti,twl4030-power-reset";
ti,use_poweroff;
};
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
ti,ramp_delay_value = <3>;
};
};
};
};
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
&twl_keypad {
keypad,num-rows = <8>;
keypad,num-columns = <6>;
linux,keymap = <
MATRIX_KEY(0, 0, KEY_9)
MATRIX_KEY(0, 1, KEY_8)
MATRIX_KEY(0, 2, KEY_I)
MATRIX_KEY(0, 3, KEY_J)
MATRIX_KEY(0, 4, KEY_N)
MATRIX_KEY(0, 5, KEY_M)
MATRIX_KEY(1, 0, KEY_0)
MATRIX_KEY(1, 1, KEY_7)
MATRIX_KEY(1, 2, KEY_U)
MATRIX_KEY(1, 3, KEY_H)
MATRIX_KEY(1, 4, KEY_B)
MATRIX_KEY(1, 5, KEY_SPACE)
MATRIX_KEY(2, 0, KEY_BACKSPACE)
MATRIX_KEY(2, 1, KEY_6)
MATRIX_KEY(2, 2, KEY_Y)
MATRIX_KEY(2, 3, KEY_G)
MATRIX_KEY(2, 4, KEY_V)
MATRIX_KEY(2, 5, KEY_FN)
MATRIX_KEY(3, 0, KEY_O)
MATRIX_KEY(3, 1, KEY_5)
MATRIX_KEY(3, 2, KEY_T)
MATRIX_KEY(3, 3, KEY_F)
MATRIX_KEY(3, 4, KEY_C)
MATRIX_KEY(4, 0, KEY_P)
MATRIX_KEY(4, 1, KEY_4)
MATRIX_KEY(4, 2, KEY_R)
MATRIX_KEY(4, 3, KEY_D)
MATRIX_KEY(4, 4, KEY_X)
MATRIX_KEY(5, 0, KEY_K)
MATRIX_KEY(5, 1, KEY_3)
MATRIX_KEY(5, 2, KEY_E)
MATRIX_KEY(5, 3, KEY_S)
MATRIX_KEY(5, 4, KEY_Z)
MATRIX_KEY(6, 0, KEY_L)
MATRIX_KEY(6, 1, KEY_2)
MATRIX_KEY(6, 2, KEY_W)
MATRIX_KEY(6, 3, KEY_A)
MATRIX_KEY(6, 4, KEY_RIGHTBRACE)
MATRIX_KEY(7, 0, KEY_ENTER)
MATRIX_KEY(7, 1, KEY_1)
MATRIX_KEY(7, 2, KEY_Q)
MATRIX_KEY(7, 3, KEY_LEFTSHIFT)
MATRIX_KEY(7, 4, KEY_LEFTBRACE )
>;
};
/* backup battery charger */
&charger {
ti,bb-uvolt = <3200000>;
ti,bb-uamp = <150>;
};
/* MMC2 */
&vmmc2 {
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <3150000>;
};
/* LCD */
&vaux1 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
/* USB Host PHY */
&vaux2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
/* available on expansion connector */
&vaux3 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
/* ADS7846 and nubs */
&vaux4 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
/* power audio DAC and LID sensor */
&vsim {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
&i2c2 {
clock-frequency = <100000>;
/* no clients so we should disable clock */
};
&i2c3 {
clock-frequency = <100000>;
bq27500@55 {
compatible = "ti,bq27500";
reg = <0x55>;
};
};
&usb_otg_hs {
interface-type = <0>;
usb-phy = <&usb2_phy>;
phys = <&usb2_phy>;
phy-names = "usb2-phy";
mode = <3>;
power = <50>;
};
/*
* Many pandora boards have been produced with defective write-protect switches
* on either slot, so it was decided not to use this feature. If you know
* your board has good switches, feel free to uncomment wp-gpios below.
*/
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vmmc1>;
bus-width = <4>;
cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
/*wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;*/ /* GPIO_126 */
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&vmmc2>;
bus-width = <4>;
cd-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
/*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/ /* GPIO_127 */
};
/* mmc3 is probed using pdata-quirks to pass wl1251 card data */
&mmc3 {
status = "disabled";
};
/* bluetooth*/
&uart1 {
};
/* spare (expansion connector) */
&uart2 {
};
/* console (expansion connector) */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
};
&usbhshost {
port2-mode = "ehci-phy";
};
&usbhsehci {
phys = <0 &hsusb2_phy>;
};
&gpmc {
ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
ti,nand-ecc-opt = "sw";
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
gpmc,cs-wr-off-ns = <44>;
gpmc,adv-on-ns = <6>;
gpmc,adv-rd-off-ns = <34>;
gpmc,adv-wr-off-ns = <44>;
gpmc,we-off-ns = <40>;
gpmc,oe-off-ns = <54>;
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
gpmc,device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
/* u-boot uses mtdparts=nand:512k(xloader),1920k(uboot),128k(uboot-env),10m(boot),-(rootfs) */
x-loader@0 {
label = "xloader";
reg = <0 0x80000>;
};
bootloaders@80000 {
label = "uboot";
reg = <0x80000 0x1e0000>;
};
bootloaders_env@260000 {
label = "uboot-env";
reg = <0x260000 0x20000>;
};
kernel@280000 {
label = "boot";
reg = <0x280000 0xa00000>;
};
filesystem@c80000 {
label = "rootfs";
reg = <0xc80000 0>; /* 0 = MTDPART_SIZ_FULL */
};
};
};
&mcspi1 {
tsc2046@0 {
reg = <0>; /* CS0 */
compatible = "ti,tsc2046";
spi-max-frequency = <1000000>;
pinctrl-names = "default";
pinctrl-0 = <&penirq_pins>;
interrupt-parent = <&gpio3>;
interrupts = <30 0>; /* GPIO_94 */
pendown-gpio = <&gpio3 30 0>;
vcc-supply = <&vaux4>;
ti,x-min = /bits/ 16 <0>;
ti,x-max = /bits/ 16 <8000>;
ti,y-min = /bits/ 16 <0>;
ti,y-max = /bits/ 16 <4800>;
ti,x-plate-ohms = /bits/ 16 <40>;
ti,pressure-max = /bits/ 16 <255>;
linux,wakeup;
};
lcd: lcd@1 {
reg = <1>; /* CS1 */
compatible = "omapdss,tpo,td043mtea1";
spi-max-frequency = <100000>;
spi-cpol;
spi-cpha;
label = "lcd";
reset-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; /* GPIO_157 */
vcc-supply = <&vaux1>;
port {
lcd_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
};
};
/* n/a - used as GPIOs */
&mcbsp1 {
};
/* audio DAC */
&mcbsp2 {
};
/* bluetooth */
&mcbsp3 {
};
/* to twl4030*/
&mcbsp4 {
};
&venc {
status = "ok";
vdda-supply = <&vdac>;
port {
venc_out: endpoint {
remote-endpoint = <&tv_connector_in>;
ti,channels = <2>;
};
};
};
&dss {
pinctrl-names = "default";
pinctrl-0 = < &dss_dpi_pins >;
status = "ok";
vdds_dsi-supply = <&vpll2>;
port {
dpi_out: endpoint {
remote-endpoint = <&lcd_in>;
data-lines = <24>;
};
};
};
View git blame Copy permalink