![Jingoo Han](/assets/img/avatar_default.png)
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
683 lines
16 KiB
C
683 lines
16 KiB
C
/*
|
|
* Driver for the Himax HX-8357 LCD Controller
|
|
*
|
|
* Copyright 2012 Free Electrons
|
|
*
|
|
* Licensed under the GPLv2 or later.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/lcd.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/spi/spi.h>
|
|
|
|
#define HX8357_NUM_IM_PINS 3
|
|
|
|
#define HX8357_SWRESET 0x01
|
|
#define HX8357_GET_RED_CHANNEL 0x06
|
|
#define HX8357_GET_GREEN_CHANNEL 0x07
|
|
#define HX8357_GET_BLUE_CHANNEL 0x08
|
|
#define HX8357_GET_POWER_MODE 0x0a
|
|
#define HX8357_GET_MADCTL 0x0b
|
|
#define HX8357_GET_PIXEL_FORMAT 0x0c
|
|
#define HX8357_GET_DISPLAY_MODE 0x0d
|
|
#define HX8357_GET_SIGNAL_MODE 0x0e
|
|
#define HX8357_GET_DIAGNOSTIC_RESULT 0x0f
|
|
#define HX8357_ENTER_SLEEP_MODE 0x10
|
|
#define HX8357_EXIT_SLEEP_MODE 0x11
|
|
#define HX8357_ENTER_PARTIAL_MODE 0x12
|
|
#define HX8357_ENTER_NORMAL_MODE 0x13
|
|
#define HX8357_EXIT_INVERSION_MODE 0x20
|
|
#define HX8357_ENTER_INVERSION_MODE 0x21
|
|
#define HX8357_SET_DISPLAY_OFF 0x28
|
|
#define HX8357_SET_DISPLAY_ON 0x29
|
|
#define HX8357_SET_COLUMN_ADDRESS 0x2a
|
|
#define HX8357_SET_PAGE_ADDRESS 0x2b
|
|
#define HX8357_WRITE_MEMORY_START 0x2c
|
|
#define HX8357_READ_MEMORY_START 0x2e
|
|
#define HX8357_SET_PARTIAL_AREA 0x30
|
|
#define HX8357_SET_SCROLL_AREA 0x33
|
|
#define HX8357_SET_TEAR_OFF 0x34
|
|
#define HX8357_SET_TEAR_ON 0x35
|
|
#define HX8357_SET_ADDRESS_MODE 0x36
|
|
#define HX8357_SET_SCROLL_START 0x37
|
|
#define HX8357_EXIT_IDLE_MODE 0x38
|
|
#define HX8357_ENTER_IDLE_MODE 0x39
|
|
#define HX8357_SET_PIXEL_FORMAT 0x3a
|
|
#define HX8357_SET_PIXEL_FORMAT_DBI_3BIT (0x1)
|
|
#define HX8357_SET_PIXEL_FORMAT_DBI_16BIT (0x5)
|
|
#define HX8357_SET_PIXEL_FORMAT_DBI_18BIT (0x6)
|
|
#define HX8357_SET_PIXEL_FORMAT_DPI_3BIT (0x1 << 4)
|
|
#define HX8357_SET_PIXEL_FORMAT_DPI_16BIT (0x5 << 4)
|
|
#define HX8357_SET_PIXEL_FORMAT_DPI_18BIT (0x6 << 4)
|
|
#define HX8357_WRITE_MEMORY_CONTINUE 0x3c
|
|
#define HX8357_READ_MEMORY_CONTINUE 0x3e
|
|
#define HX8357_SET_TEAR_SCAN_LINES 0x44
|
|
#define HX8357_GET_SCAN_LINES 0x45
|
|
#define HX8357_READ_DDB_START 0xa1
|
|
#define HX8357_SET_DISPLAY_MODE 0xb4
|
|
#define HX8357_SET_DISPLAY_MODE_RGB_THROUGH (0x3)
|
|
#define HX8357_SET_DISPLAY_MODE_RGB_INTERFACE (1 << 4)
|
|
#define HX8357_SET_PANEL_DRIVING 0xc0
|
|
#define HX8357_SET_DISPLAY_FRAME 0xc5
|
|
#define HX8357_SET_RGB 0xc6
|
|
#define HX8357_SET_RGB_ENABLE_HIGH (1 << 1)
|
|
#define HX8357_SET_GAMMA 0xc8
|
|
#define HX8357_SET_POWER 0xd0
|
|
#define HX8357_SET_VCOM 0xd1
|
|
#define HX8357_SET_POWER_NORMAL 0xd2
|
|
#define HX8357_SET_PANEL_RELATED 0xe9
|
|
|
|
#define HX8369_SET_DISPLAY_BRIGHTNESS 0x51
|
|
#define HX8369_WRITE_CABC_DISPLAY_VALUE 0x53
|
|
#define HX8369_WRITE_CABC_BRIGHT_CTRL 0x55
|
|
#define HX8369_WRITE_CABC_MIN_BRIGHTNESS 0x5e
|
|
#define HX8369_SET_POWER 0xb1
|
|
#define HX8369_SET_DISPLAY_MODE 0xb2
|
|
#define HX8369_SET_DISPLAY_WAVEFORM_CYC 0xb4
|
|
#define HX8369_SET_VCOM 0xb6
|
|
#define HX8369_SET_EXTENSION_COMMAND 0xb9
|
|
#define HX8369_SET_GIP 0xd5
|
|
#define HX8369_SET_GAMMA_CURVE_RELATED 0xe0
|
|
|
|
struct hx8357_data {
|
|
unsigned im_pins[HX8357_NUM_IM_PINS];
|
|
unsigned reset;
|
|
struct spi_device *spi;
|
|
int state;
|
|
bool use_im_pins;
|
|
};
|
|
|
|
static u8 hx8357_seq_power[] = {
|
|
HX8357_SET_POWER, 0x44, 0x41, 0x06,
|
|
};
|
|
|
|
static u8 hx8357_seq_vcom[] = {
|
|
HX8357_SET_VCOM, 0x40, 0x10,
|
|
};
|
|
|
|
static u8 hx8357_seq_power_normal[] = {
|
|
HX8357_SET_POWER_NORMAL, 0x05, 0x12,
|
|
};
|
|
|
|
static u8 hx8357_seq_panel_driving[] = {
|
|
HX8357_SET_PANEL_DRIVING, 0x14, 0x3b, 0x00, 0x02, 0x11,
|
|
};
|
|
|
|
static u8 hx8357_seq_display_frame[] = {
|
|
HX8357_SET_DISPLAY_FRAME, 0x0c,
|
|
};
|
|
|
|
static u8 hx8357_seq_panel_related[] = {
|
|
HX8357_SET_PANEL_RELATED, 0x01,
|
|
};
|
|
|
|
static u8 hx8357_seq_undefined1[] = {
|
|
0xea, 0x03, 0x00, 0x00,
|
|
};
|
|
|
|
static u8 hx8357_seq_undefined2[] = {
|
|
0xeb, 0x40, 0x54, 0x26, 0xdb,
|
|
};
|
|
|
|
static u8 hx8357_seq_gamma[] = {
|
|
HX8357_SET_GAMMA, 0x00, 0x15, 0x00, 0x22, 0x00,
|
|
0x08, 0x77, 0x26, 0x77, 0x22, 0x04, 0x00,
|
|
};
|
|
|
|
static u8 hx8357_seq_address_mode[] = {
|
|
HX8357_SET_ADDRESS_MODE, 0xc0,
|
|
};
|
|
|
|
static u8 hx8357_seq_pixel_format[] = {
|
|
HX8357_SET_PIXEL_FORMAT,
|
|
HX8357_SET_PIXEL_FORMAT_DPI_18BIT |
|
|
HX8357_SET_PIXEL_FORMAT_DBI_18BIT,
|
|
};
|
|
|
|
static u8 hx8357_seq_column_address[] = {
|
|
HX8357_SET_COLUMN_ADDRESS, 0x00, 0x00, 0x01, 0x3f,
|
|
};
|
|
|
|
static u8 hx8357_seq_page_address[] = {
|
|
HX8357_SET_PAGE_ADDRESS, 0x00, 0x00, 0x01, 0xdf,
|
|
};
|
|
|
|
static u8 hx8357_seq_rgb[] = {
|
|
HX8357_SET_RGB, 0x02,
|
|
};
|
|
|
|
static u8 hx8357_seq_display_mode[] = {
|
|
HX8357_SET_DISPLAY_MODE,
|
|
HX8357_SET_DISPLAY_MODE_RGB_THROUGH |
|
|
HX8357_SET_DISPLAY_MODE_RGB_INTERFACE,
|
|
};
|
|
|
|
static u8 hx8369_seq_write_CABC_min_brightness[] = {
|
|
HX8369_WRITE_CABC_MIN_BRIGHTNESS, 0x00,
|
|
};
|
|
|
|
static u8 hx8369_seq_write_CABC_control[] = {
|
|
HX8369_WRITE_CABC_DISPLAY_VALUE, 0x24,
|
|
};
|
|
|
|
static u8 hx8369_seq_set_display_brightness[] = {
|
|
HX8369_SET_DISPLAY_BRIGHTNESS, 0xFF,
|
|
};
|
|
|
|
static u8 hx8369_seq_write_CABC_control_setting[] = {
|
|
HX8369_WRITE_CABC_BRIGHT_CTRL, 0x02,
|
|
};
|
|
|
|
static u8 hx8369_seq_extension_command[] = {
|
|
HX8369_SET_EXTENSION_COMMAND, 0xff, 0x83, 0x69,
|
|
};
|
|
|
|
static u8 hx8369_seq_display_related[] = {
|
|
HX8369_SET_DISPLAY_MODE, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00,
|
|
0xff, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00, 0x01,
|
|
};
|
|
|
|
static u8 hx8369_seq_panel_waveform_cycle[] = {
|
|
HX8369_SET_DISPLAY_WAVEFORM_CYC, 0x0a, 0x1d, 0x80, 0x06, 0x02,
|
|
};
|
|
|
|
static u8 hx8369_seq_set_address_mode[] = {
|
|
HX8357_SET_ADDRESS_MODE, 0x00,
|
|
};
|
|
|
|
static u8 hx8369_seq_vcom[] = {
|
|
HX8369_SET_VCOM, 0x3e, 0x3e,
|
|
};
|
|
|
|
static u8 hx8369_seq_gip[] = {
|
|
HX8369_SET_GIP, 0x00, 0x01, 0x03, 0x25, 0x01, 0x02, 0x28, 0x70,
|
|
0x11, 0x13, 0x00, 0x00, 0x40, 0x26, 0x51, 0x37, 0x00, 0x00, 0x71,
|
|
0x35, 0x60, 0x24, 0x07, 0x0f, 0x04, 0x04,
|
|
};
|
|
|
|
static u8 hx8369_seq_power[] = {
|
|
HX8369_SET_POWER, 0x01, 0x00, 0x34, 0x03, 0x00, 0x11, 0x11, 0x32,
|
|
0x2f, 0x3f, 0x3f, 0x01, 0x3a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6,
|
|
};
|
|
|
|
static u8 hx8369_seq_gamma_curve_related[] = {
|
|
HX8369_SET_GAMMA_CURVE_RELATED, 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d,
|
|
0x2e, 0x4a, 0x08, 0x0e, 0x0f, 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
|
|
0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d, 0x2e, 0x4a, 0x08, 0x0e, 0x0f,
|
|
0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
|
|
};
|
|
|
|
static int hx8357_spi_write_then_read(struct lcd_device *lcdev,
|
|
u8 *txbuf, u16 txlen,
|
|
u8 *rxbuf, u16 rxlen)
|
|
{
|
|
struct hx8357_data *lcd = lcd_get_data(lcdev);
|
|
struct spi_message msg;
|
|
struct spi_transfer xfer[2];
|
|
u16 *local_txbuf = NULL;
|
|
int ret = 0;
|
|
|
|
memset(xfer, 0, sizeof(xfer));
|
|
spi_message_init(&msg);
|
|
|
|
if (txlen) {
|
|
int i;
|
|
|
|
local_txbuf = kcalloc(txlen, sizeof(*local_txbuf), GFP_KERNEL);
|
|
|
|
if (!local_txbuf)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < txlen; i++) {
|
|
local_txbuf[i] = txbuf[i];
|
|
if (i > 0)
|
|
local_txbuf[i] |= 1 << 8;
|
|
}
|
|
|
|
xfer[0].len = 2 * txlen;
|
|
xfer[0].bits_per_word = 9;
|
|
xfer[0].tx_buf = local_txbuf;
|
|
spi_message_add_tail(&xfer[0], &msg);
|
|
}
|
|
|
|
if (rxlen) {
|
|
xfer[1].len = rxlen;
|
|
xfer[1].bits_per_word = 8;
|
|
xfer[1].rx_buf = rxbuf;
|
|
spi_message_add_tail(&xfer[1], &msg);
|
|
}
|
|
|
|
ret = spi_sync(lcd->spi, &msg);
|
|
if (ret < 0)
|
|
dev_err(&lcdev->dev, "Couldn't send SPI data\n");
|
|
|
|
if (txlen)
|
|
kfree(local_txbuf);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline int hx8357_spi_write_array(struct lcd_device *lcdev,
|
|
u8 *value, u8 len)
|
|
{
|
|
return hx8357_spi_write_then_read(lcdev, value, len, NULL, 0);
|
|
}
|
|
|
|
static inline int hx8357_spi_write_byte(struct lcd_device *lcdev,
|
|
u8 value)
|
|
{
|
|
return hx8357_spi_write_then_read(lcdev, &value, 1, NULL, 0);
|
|
}
|
|
|
|
static int hx8357_enter_standby(struct lcd_device *lcdev)
|
|
{
|
|
int ret;
|
|
|
|
ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_OFF);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
usleep_range(10000, 12000);
|
|
|
|
ret = hx8357_spi_write_byte(lcdev, HX8357_ENTER_SLEEP_MODE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* The controller needs 120ms when entering in sleep mode before we can
|
|
* send the command to go off sleep mode
|
|
*/
|
|
msleep(120);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hx8357_exit_standby(struct lcd_device *lcdev)
|
|
{
|
|
int ret;
|
|
|
|
ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* The controller needs 120ms when exiting from sleep mode before we
|
|
* can send the command to enter in sleep mode
|
|
*/
|
|
msleep(120);
|
|
|
|
ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void hx8357_lcd_reset(struct lcd_device *lcdev)
|
|
{
|
|
struct hx8357_data *lcd = lcd_get_data(lcdev);
|
|
|
|
/* Reset the screen */
|
|
gpio_set_value(lcd->reset, 1);
|
|
usleep_range(10000, 12000);
|
|
gpio_set_value(lcd->reset, 0);
|
|
usleep_range(10000, 12000);
|
|
gpio_set_value(lcd->reset, 1);
|
|
|
|
/* The controller needs 120ms to recover from reset */
|
|
msleep(120);
|
|
}
|
|
|
|
static int hx8357_lcd_init(struct lcd_device *lcdev)
|
|
{
|
|
struct hx8357_data *lcd = lcd_get_data(lcdev);
|
|
int ret;
|
|
|
|
/*
|
|
* Set the interface selection pins to SPI mode, with three
|
|
* wires
|
|
*/
|
|
if (lcd->use_im_pins) {
|
|
gpio_set_value_cansleep(lcd->im_pins[0], 1);
|
|
gpio_set_value_cansleep(lcd->im_pins[1], 0);
|
|
gpio_set_value_cansleep(lcd->im_pins[2], 1);
|
|
}
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8357_seq_power,
|
|
ARRAY_SIZE(hx8357_seq_power));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8357_seq_vcom,
|
|
ARRAY_SIZE(hx8357_seq_vcom));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8357_seq_power_normal,
|
|
ARRAY_SIZE(hx8357_seq_power_normal));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8357_seq_panel_driving,
|
|
ARRAY_SIZE(hx8357_seq_panel_driving));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8357_seq_display_frame,
|
|
ARRAY_SIZE(hx8357_seq_display_frame));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8357_seq_panel_related,
|
|
ARRAY_SIZE(hx8357_seq_panel_related));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8357_seq_undefined1,
|
|
ARRAY_SIZE(hx8357_seq_undefined1));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8357_seq_undefined2,
|
|
ARRAY_SIZE(hx8357_seq_undefined2));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8357_seq_gamma,
|
|
ARRAY_SIZE(hx8357_seq_gamma));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8357_seq_address_mode,
|
|
ARRAY_SIZE(hx8357_seq_address_mode));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8357_seq_pixel_format,
|
|
ARRAY_SIZE(hx8357_seq_pixel_format));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8357_seq_column_address,
|
|
ARRAY_SIZE(hx8357_seq_column_address));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8357_seq_page_address,
|
|
ARRAY_SIZE(hx8357_seq_page_address));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8357_seq_rgb,
|
|
ARRAY_SIZE(hx8357_seq_rgb));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8357_seq_display_mode,
|
|
ARRAY_SIZE(hx8357_seq_display_mode));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* The controller needs 120ms to fully recover from exiting sleep mode
|
|
*/
|
|
msleep(120);
|
|
|
|
ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
usleep_range(5000, 7000);
|
|
|
|
ret = hx8357_spi_write_byte(lcdev, HX8357_WRITE_MEMORY_START);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hx8369_lcd_init(struct lcd_device *lcdev)
|
|
{
|
|
int ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8369_seq_extension_command,
|
|
ARRAY_SIZE(hx8369_seq_extension_command));
|
|
if (ret < 0)
|
|
return ret;
|
|
usleep_range(10000, 12000);
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8369_seq_display_related,
|
|
ARRAY_SIZE(hx8369_seq_display_related));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8369_seq_panel_waveform_cycle,
|
|
ARRAY_SIZE(hx8369_seq_panel_waveform_cycle));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_address_mode,
|
|
ARRAY_SIZE(hx8369_seq_set_address_mode));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8369_seq_vcom,
|
|
ARRAY_SIZE(hx8369_seq_vcom));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8369_seq_gip,
|
|
ARRAY_SIZE(hx8369_seq_gip));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8369_seq_power,
|
|
ARRAY_SIZE(hx8369_seq_power));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/*
|
|
* The controller needs 120ms to fully recover from exiting sleep mode
|
|
*/
|
|
msleep(120);
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8369_seq_gamma_curve_related,
|
|
ARRAY_SIZE(hx8369_seq_gamma_curve_related));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
|
|
if (ret < 0)
|
|
return ret;
|
|
usleep_range(1000, 1200);
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8369_seq_write_CABC_control,
|
|
ARRAY_SIZE(hx8369_seq_write_CABC_control));
|
|
if (ret < 0)
|
|
return ret;
|
|
usleep_range(10000, 12000);
|
|
|
|
ret = hx8357_spi_write_array(lcdev,
|
|
hx8369_seq_write_CABC_control_setting,
|
|
ARRAY_SIZE(hx8369_seq_write_CABC_control_setting));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_array(lcdev,
|
|
hx8369_seq_write_CABC_min_brightness,
|
|
ARRAY_SIZE(hx8369_seq_write_CABC_min_brightness));
|
|
if (ret < 0)
|
|
return ret;
|
|
usleep_range(10000, 12000);
|
|
|
|
ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_display_brightness,
|
|
ARRAY_SIZE(hx8369_seq_set_display_brightness));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
|
|
|
|
static int hx8357_set_power(struct lcd_device *lcdev, int power)
|
|
{
|
|
struct hx8357_data *lcd = lcd_get_data(lcdev);
|
|
int ret = 0;
|
|
|
|
if (POWER_IS_ON(power) && !POWER_IS_ON(lcd->state))
|
|
ret = hx8357_exit_standby(lcdev);
|
|
else if (!POWER_IS_ON(power) && POWER_IS_ON(lcd->state))
|
|
ret = hx8357_enter_standby(lcdev);
|
|
|
|
if (ret == 0)
|
|
lcd->state = power;
|
|
else
|
|
dev_warn(&lcdev->dev, "failed to set power mode %d\n", power);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int hx8357_get_power(struct lcd_device *lcdev)
|
|
{
|
|
struct hx8357_data *lcd = lcd_get_data(lcdev);
|
|
|
|
return lcd->state;
|
|
}
|
|
|
|
static struct lcd_ops hx8357_ops = {
|
|
.set_power = hx8357_set_power,
|
|
.get_power = hx8357_get_power,
|
|
};
|
|
|
|
static const struct of_device_id hx8357_dt_ids[] = {
|
|
{
|
|
.compatible = "himax,hx8357",
|
|
.data = hx8357_lcd_init,
|
|
},
|
|
{
|
|
.compatible = "himax,hx8369",
|
|
.data = hx8369_lcd_init,
|
|
},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
|
|
|
|
static int hx8357_probe(struct spi_device *spi)
|
|
{
|
|
struct lcd_device *lcdev;
|
|
struct hx8357_data *lcd;
|
|
const struct of_device_id *match;
|
|
int i, ret;
|
|
|
|
lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
|
|
if (!lcd)
|
|
return -ENOMEM;
|
|
|
|
ret = spi_setup(spi);
|
|
if (ret < 0) {
|
|
dev_err(&spi->dev, "SPI setup failed.\n");
|
|
return ret;
|
|
}
|
|
|
|
lcd->spi = spi;
|
|
|
|
match = of_match_device(hx8357_dt_ids, &spi->dev);
|
|
if (!match || !match->data)
|
|
return -EINVAL;
|
|
|
|
lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0);
|
|
if (!gpio_is_valid(lcd->reset)) {
|
|
dev_err(&spi->dev, "Missing dt property: gpios-reset\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = devm_gpio_request_one(&spi->dev, lcd->reset,
|
|
GPIOF_OUT_INIT_HIGH,
|
|
"hx8357-reset");
|
|
if (ret) {
|
|
dev_err(&spi->dev,
|
|
"failed to request gpio %d: %d\n",
|
|
lcd->reset, ret);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (of_find_property(spi->dev.of_node, "im-gpios", NULL)) {
|
|
lcd->use_im_pins = 1;
|
|
|
|
for (i = 0; i < HX8357_NUM_IM_PINS; i++) {
|
|
lcd->im_pins[i] = of_get_named_gpio(spi->dev.of_node,
|
|
"im-gpios", i);
|
|
if (lcd->im_pins[i] == -EPROBE_DEFER) {
|
|
dev_info(&spi->dev, "GPIO requested is not here yet, deferring the probe\n");
|
|
return -EPROBE_DEFER;
|
|
}
|
|
if (!gpio_is_valid(lcd->im_pins[i])) {
|
|
dev_err(&spi->dev, "Missing dt property: im-gpios\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = devm_gpio_request_one(&spi->dev, lcd->im_pins[i],
|
|
GPIOF_OUT_INIT_LOW,
|
|
"im_pins");
|
|
if (ret) {
|
|
dev_err(&spi->dev, "failed to request gpio %d: %d\n",
|
|
lcd->im_pins[i], ret);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
} else {
|
|
lcd->use_im_pins = 0;
|
|
}
|
|
|
|
lcdev = devm_lcd_device_register(&spi->dev, "mxsfb", &spi->dev, lcd,
|
|
&hx8357_ops);
|
|
if (IS_ERR(lcdev)) {
|
|
ret = PTR_ERR(lcdev);
|
|
return ret;
|
|
}
|
|
spi_set_drvdata(spi, lcdev);
|
|
|
|
hx8357_lcd_reset(lcdev);
|
|
|
|
ret = ((int (*)(struct lcd_device *))match->data)(lcdev);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "Couldn't initialize panel\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_info(&spi->dev, "Panel probed\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct spi_driver hx8357_driver = {
|
|
.probe = hx8357_probe,
|
|
.driver = {
|
|
.name = "hx8357",
|
|
.of_match_table = hx8357_dt_ids,
|
|
},
|
|
};
|
|
|
|
module_spi_driver(hx8357_driver);
|
|
|
|
MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
|
|
MODULE_DESCRIPTION("Himax HX-8357 LCD Driver");
|
|
MODULE_LICENSE("GPL");
|