![Stefan Richter](/assets/img/avatar_default.png)
As far as I know, all CardBus FireWire 400 adapters have a maximum payload of 1024 bytes which is less than the speed-dependent limit of 2048 bytes. Fw-sbp2 has to take the host adapter's limit into account. This apparently fixes Juju's incompatibility with my CardBus cards, a NEC based card and a VIA based card. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Kristian Høgsberg <krh@redhat.com>
1201 lines
34 KiB
C
1201 lines
34 KiB
C
/*
|
|
* SBP2 driver (SCSI over IEEE1394)
|
|
*
|
|
* Copyright (C) 2005-2007 Kristian Hoegsberg <krh@bitplanet.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
|
|
/*
|
|
* The basic structure of this driver is based on the old storage driver,
|
|
* drivers/ieee1394/sbp2.c, originally written by
|
|
* James Goodwin <jamesg@filanet.com>
|
|
* with later contributions and ongoing maintenance from
|
|
* Ben Collins <bcollins@debian.org>,
|
|
* Stefan Richter <stefanr@s5r6.in-berlin.de>
|
|
* and many others.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/device.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <scsi/scsi_dbg.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_host.h>
|
|
|
|
#include "fw-transaction.h"
|
|
#include "fw-topology.h"
|
|
#include "fw-device.h"
|
|
|
|
/*
|
|
* So far only bridges from Oxford Semiconductor are known to support
|
|
* concurrent logins. Depending on firmware, four or two concurrent logins
|
|
* are possible on OXFW911 and newer Oxsemi bridges.
|
|
*
|
|
* Concurrent logins are useful together with cluster filesystems.
|
|
*/
|
|
static int sbp2_param_exclusive_login = 1;
|
|
module_param_named(exclusive_login, sbp2_param_exclusive_login, bool, 0644);
|
|
MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device "
|
|
"(default = Y, use N for concurrent initiators)");
|
|
|
|
/* I don't know why the SCSI stack doesn't define something like this... */
|
|
typedef void (*scsi_done_fn_t)(struct scsi_cmnd *);
|
|
|
|
static const char sbp2_driver_name[] = "sbp2";
|
|
|
|
struct sbp2_device {
|
|
struct kref kref;
|
|
struct fw_unit *unit;
|
|
struct fw_address_handler address_handler;
|
|
struct list_head orb_list;
|
|
u64 management_agent_address;
|
|
u64 command_block_agent_address;
|
|
u32 workarounds;
|
|
int login_id;
|
|
|
|
/*
|
|
* We cache these addresses and only update them once we've
|
|
* logged in or reconnected to the sbp2 device. That way, any
|
|
* IO to the device will automatically fail and get retried if
|
|
* it happens in a window where the device is not ready to
|
|
* handle it (e.g. after a bus reset but before we reconnect).
|
|
*/
|
|
int node_id;
|
|
int address_high;
|
|
int generation;
|
|
|
|
int retries;
|
|
struct delayed_work work;
|
|
};
|
|
|
|
#define SBP2_MAX_SG_ELEMENT_LENGTH 0xf000
|
|
#define SBP2_MAX_SECTORS 255 /* Max sectors supported */
|
|
#define SBP2_ORB_TIMEOUT 2000 /* Timeout in ms */
|
|
|
|
#define SBP2_ORB_NULL 0x80000000
|
|
|
|
#define SBP2_DIRECTION_TO_MEDIA 0x0
|
|
#define SBP2_DIRECTION_FROM_MEDIA 0x1
|
|
|
|
/* Unit directory keys */
|
|
#define SBP2_COMMAND_SET_SPECIFIER 0x38
|
|
#define SBP2_COMMAND_SET 0x39
|
|
#define SBP2_COMMAND_SET_REVISION 0x3b
|
|
#define SBP2_FIRMWARE_REVISION 0x3c
|
|
|
|
/* Flags for detected oddities and brokeness */
|
|
#define SBP2_WORKAROUND_128K_MAX_TRANS 0x1
|
|
#define SBP2_WORKAROUND_INQUIRY_36 0x2
|
|
#define SBP2_WORKAROUND_MODE_SENSE_8 0x4
|
|
#define SBP2_WORKAROUND_FIX_CAPACITY 0x8
|
|
#define SBP2_WORKAROUND_OVERRIDE 0x100
|
|
|
|
/* Management orb opcodes */
|
|
#define SBP2_LOGIN_REQUEST 0x0
|
|
#define SBP2_QUERY_LOGINS_REQUEST 0x1
|
|
#define SBP2_RECONNECT_REQUEST 0x3
|
|
#define SBP2_SET_PASSWORD_REQUEST 0x4
|
|
#define SBP2_LOGOUT_REQUEST 0x7
|
|
#define SBP2_ABORT_TASK_REQUEST 0xb
|
|
#define SBP2_ABORT_TASK_SET 0xc
|
|
#define SBP2_LOGICAL_UNIT_RESET 0xe
|
|
#define SBP2_TARGET_RESET_REQUEST 0xf
|
|
|
|
/* Offsets for command block agent registers */
|
|
#define SBP2_AGENT_STATE 0x00
|
|
#define SBP2_AGENT_RESET 0x04
|
|
#define SBP2_ORB_POINTER 0x08
|
|
#define SBP2_DOORBELL 0x10
|
|
#define SBP2_UNSOLICITED_STATUS_ENABLE 0x14
|
|
|
|
/* Status write response codes */
|
|
#define SBP2_STATUS_REQUEST_COMPLETE 0x0
|
|
#define SBP2_STATUS_TRANSPORT_FAILURE 0x1
|
|
#define SBP2_STATUS_ILLEGAL_REQUEST 0x2
|
|
#define SBP2_STATUS_VENDOR_DEPENDENT 0x3
|
|
|
|
#define STATUS_GET_ORB_HIGH(v) ((v).status & 0xffff)
|
|
#define STATUS_GET_SBP_STATUS(v) (((v).status >> 16) & 0xff)
|
|
#define STATUS_GET_LEN(v) (((v).status >> 24) & 0x07)
|
|
#define STATUS_GET_DEAD(v) (((v).status >> 27) & 0x01)
|
|
#define STATUS_GET_RESPONSE(v) (((v).status >> 28) & 0x03)
|
|
#define STATUS_GET_SOURCE(v) (((v).status >> 30) & 0x03)
|
|
#define STATUS_GET_ORB_LOW(v) ((v).orb_low)
|
|
#define STATUS_GET_DATA(v) ((v).data)
|
|
|
|
struct sbp2_status {
|
|
u32 status;
|
|
u32 orb_low;
|
|
u8 data[24];
|
|
};
|
|
|
|
struct sbp2_pointer {
|
|
u32 high;
|
|
u32 low;
|
|
};
|
|
|
|
struct sbp2_orb {
|
|
struct fw_transaction t;
|
|
dma_addr_t request_bus;
|
|
int rcode;
|
|
struct sbp2_pointer pointer;
|
|
void (*callback)(struct sbp2_orb * orb, struct sbp2_status * status);
|
|
struct list_head link;
|
|
};
|
|
|
|
#define MANAGEMENT_ORB_LUN(v) ((v))
|
|
#define MANAGEMENT_ORB_FUNCTION(v) ((v) << 16)
|
|
#define MANAGEMENT_ORB_RECONNECT(v) ((v) << 20)
|
|
#define MANAGEMENT_ORB_EXCLUSIVE(v) ((v) ? 1 << 28 : 0)
|
|
#define MANAGEMENT_ORB_REQUEST_FORMAT(v) ((v) << 29)
|
|
#define MANAGEMENT_ORB_NOTIFY ((1) << 31)
|
|
|
|
#define MANAGEMENT_ORB_RESPONSE_LENGTH(v) ((v))
|
|
#define MANAGEMENT_ORB_PASSWORD_LENGTH(v) ((v) << 16)
|
|
|
|
struct sbp2_management_orb {
|
|
struct sbp2_orb base;
|
|
struct {
|
|
struct sbp2_pointer password;
|
|
struct sbp2_pointer response;
|
|
u32 misc;
|
|
u32 length;
|
|
struct sbp2_pointer status_fifo;
|
|
} request;
|
|
__be32 response[4];
|
|
dma_addr_t response_bus;
|
|
struct completion done;
|
|
struct sbp2_status status;
|
|
};
|
|
|
|
#define LOGIN_RESPONSE_GET_LOGIN_ID(v) ((v).misc & 0xffff)
|
|
#define LOGIN_RESPONSE_GET_LENGTH(v) (((v).misc >> 16) & 0xffff)
|
|
|
|
struct sbp2_login_response {
|
|
u32 misc;
|
|
struct sbp2_pointer command_block_agent;
|
|
u32 reconnect_hold;
|
|
};
|
|
#define COMMAND_ORB_DATA_SIZE(v) ((v))
|
|
#define COMMAND_ORB_PAGE_SIZE(v) ((v) << 16)
|
|
#define COMMAND_ORB_PAGE_TABLE_PRESENT ((1) << 19)
|
|
#define COMMAND_ORB_MAX_PAYLOAD(v) ((v) << 20)
|
|
#define COMMAND_ORB_SPEED(v) ((v) << 24)
|
|
#define COMMAND_ORB_DIRECTION(v) ((v) << 27)
|
|
#define COMMAND_ORB_REQUEST_FORMAT(v) ((v) << 29)
|
|
#define COMMAND_ORB_NOTIFY ((1) << 31)
|
|
|
|
struct sbp2_command_orb {
|
|
struct sbp2_orb base;
|
|
struct {
|
|
struct sbp2_pointer next;
|
|
struct sbp2_pointer data_descriptor;
|
|
u32 misc;
|
|
u8 command_block[12];
|
|
} request;
|
|
struct scsi_cmnd *cmd;
|
|
scsi_done_fn_t done;
|
|
struct fw_unit *unit;
|
|
|
|
struct sbp2_pointer page_table[SG_ALL] __attribute__((aligned(8)));
|
|
dma_addr_t page_table_bus;
|
|
};
|
|
|
|
/*
|
|
* List of devices with known bugs.
|
|
*
|
|
* The firmware_revision field, masked with 0xffff00, is the best
|
|
* indicator for the type of bridge chip of a device. It yields a few
|
|
* false positives but this did not break correctly behaving devices
|
|
* so far. We use ~0 as a wildcard, since the 24 bit values we get
|
|
* from the config rom can never match that.
|
|
*/
|
|
static const struct {
|
|
u32 firmware_revision;
|
|
u32 model;
|
|
unsigned workarounds;
|
|
} sbp2_workarounds_table[] = {
|
|
/* DViCO Momobay CX-1 with TSB42AA9 bridge */ {
|
|
.firmware_revision = 0x002800,
|
|
.model = 0x001010,
|
|
.workarounds = SBP2_WORKAROUND_INQUIRY_36 |
|
|
SBP2_WORKAROUND_MODE_SENSE_8,
|
|
},
|
|
/* Initio bridges, actually only needed for some older ones */ {
|
|
.firmware_revision = 0x000200,
|
|
.model = ~0,
|
|
.workarounds = SBP2_WORKAROUND_INQUIRY_36,
|
|
},
|
|
/* Symbios bridge */ {
|
|
.firmware_revision = 0xa0b800,
|
|
.model = ~0,
|
|
.workarounds = SBP2_WORKAROUND_128K_MAX_TRANS,
|
|
},
|
|
|
|
/*
|
|
* There are iPods (2nd gen, 3rd gen) with model_id == 0, but
|
|
* these iPods do not feature the read_capacity bug according
|
|
* to one report. Read_capacity behaviour as well as model_id
|
|
* could change due to Apple-supplied firmware updates though.
|
|
*/
|
|
|
|
/* iPod 4th generation. */ {
|
|
.firmware_revision = 0x0a2700,
|
|
.model = 0x000021,
|
|
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
|
|
},
|
|
/* iPod mini */ {
|
|
.firmware_revision = 0x0a2700,
|
|
.model = 0x000023,
|
|
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
|
|
},
|
|
/* iPod Photo */ {
|
|
.firmware_revision = 0x0a2700,
|
|
.model = 0x00007e,
|
|
.workarounds = SBP2_WORKAROUND_FIX_CAPACITY,
|
|
}
|
|
};
|
|
|
|
static void
|
|
sbp2_status_write(struct fw_card *card, struct fw_request *request,
|
|
int tcode, int destination, int source,
|
|
int generation, int speed,
|
|
unsigned long long offset,
|
|
void *payload, size_t length, void *callback_data)
|
|
{
|
|
struct sbp2_device *sd = callback_data;
|
|
struct sbp2_orb *orb;
|
|
struct sbp2_status status;
|
|
size_t header_size;
|
|
unsigned long flags;
|
|
|
|
if (tcode != TCODE_WRITE_BLOCK_REQUEST ||
|
|
length == 0 || length > sizeof(status)) {
|
|
fw_send_response(card, request, RCODE_TYPE_ERROR);
|
|
return;
|
|
}
|
|
|
|
header_size = min(length, 2 * sizeof(u32));
|
|
fw_memcpy_from_be32(&status, payload, header_size);
|
|
if (length > header_size)
|
|
memcpy(status.data, payload + 8, length - header_size);
|
|
if (STATUS_GET_SOURCE(status) == 2 || STATUS_GET_SOURCE(status) == 3) {
|
|
fw_notify("non-orb related status write, not handled\n");
|
|
fw_send_response(card, request, RCODE_COMPLETE);
|
|
return;
|
|
}
|
|
|
|
/* Lookup the orb corresponding to this status write. */
|
|
spin_lock_irqsave(&card->lock, flags);
|
|
list_for_each_entry(orb, &sd->orb_list, link) {
|
|
if (STATUS_GET_ORB_HIGH(status) == 0 &&
|
|
STATUS_GET_ORB_LOW(status) == orb->request_bus &&
|
|
orb->rcode == RCODE_COMPLETE) {
|
|
list_del(&orb->link);
|
|
break;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&card->lock, flags);
|
|
|
|
if (&orb->link != &sd->orb_list)
|
|
orb->callback(orb, &status);
|
|
else
|
|
fw_error("status write for unknown orb\n");
|
|
|
|
fw_send_response(card, request, RCODE_COMPLETE);
|
|
}
|
|
|
|
static void
|
|
complete_transaction(struct fw_card *card, int rcode,
|
|
void *payload, size_t length, void *data)
|
|
{
|
|
struct sbp2_orb *orb = data;
|
|
unsigned long flags;
|
|
|
|
orb->rcode = rcode;
|
|
if (rcode != RCODE_COMPLETE) {
|
|
spin_lock_irqsave(&card->lock, flags);
|
|
list_del(&orb->link);
|
|
spin_unlock_irqrestore(&card->lock, flags);
|
|
orb->callback(orb, NULL);
|
|
}
|
|
}
|
|
|
|
static void
|
|
sbp2_send_orb(struct sbp2_orb *orb, struct fw_unit *unit,
|
|
int node_id, int generation, u64 offset)
|
|
{
|
|
struct fw_device *device = fw_device(unit->device.parent);
|
|
struct sbp2_device *sd = unit->device.driver_data;
|
|
unsigned long flags;
|
|
|
|
orb->pointer.high = 0;
|
|
orb->pointer.low = orb->request_bus;
|
|
fw_memcpy_to_be32(&orb->pointer, &orb->pointer, sizeof(orb->pointer));
|
|
|
|
spin_lock_irqsave(&device->card->lock, flags);
|
|
list_add_tail(&orb->link, &sd->orb_list);
|
|
spin_unlock_irqrestore(&device->card->lock, flags);
|
|
|
|
fw_send_request(device->card, &orb->t, TCODE_WRITE_BLOCK_REQUEST,
|
|
node_id, generation, device->max_speed, offset,
|
|
&orb->pointer, sizeof(orb->pointer),
|
|
complete_transaction, orb);
|
|
}
|
|
|
|
static int sbp2_cancel_orbs(struct fw_unit *unit)
|
|
{
|
|
struct fw_device *device = fw_device(unit->device.parent);
|
|
struct sbp2_device *sd = unit->device.driver_data;
|
|
struct sbp2_orb *orb, *next;
|
|
struct list_head list;
|
|
unsigned long flags;
|
|
int retval = -ENOENT;
|
|
|
|
INIT_LIST_HEAD(&list);
|
|
spin_lock_irqsave(&device->card->lock, flags);
|
|
list_splice_init(&sd->orb_list, &list);
|
|
spin_unlock_irqrestore(&device->card->lock, flags);
|
|
|
|
list_for_each_entry_safe(orb, next, &list, link) {
|
|
retval = 0;
|
|
if (fw_cancel_transaction(device->card, &orb->t) == 0)
|
|
continue;
|
|
|
|
orb->rcode = RCODE_CANCELLED;
|
|
orb->callback(orb, NULL);
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
static void
|
|
complete_management_orb(struct sbp2_orb *base_orb, struct sbp2_status *status)
|
|
{
|
|
struct sbp2_management_orb *orb =
|
|
container_of(base_orb, struct sbp2_management_orb, base);
|
|
|
|
if (status)
|
|
memcpy(&orb->status, status, sizeof(*status));
|
|
complete(&orb->done);
|
|
}
|
|
|
|
static int
|
|
sbp2_send_management_orb(struct fw_unit *unit, int node_id, int generation,
|
|
int function, int lun, void *response)
|
|
{
|
|
struct fw_device *device = fw_device(unit->device.parent);
|
|
struct sbp2_device *sd = unit->device.driver_data;
|
|
struct sbp2_management_orb *orb;
|
|
int retval = -ENOMEM;
|
|
|
|
orb = kzalloc(sizeof(*orb), GFP_ATOMIC);
|
|
if (orb == NULL)
|
|
return -ENOMEM;
|
|
|
|
orb->response_bus =
|
|
dma_map_single(device->card->device, &orb->response,
|
|
sizeof(orb->response), DMA_FROM_DEVICE);
|
|
if (dma_mapping_error(orb->response_bus))
|
|
goto fail_mapping_response;
|
|
|
|
orb->request.response.high = 0;
|
|
orb->request.response.low = orb->response_bus;
|
|
|
|
orb->request.misc =
|
|
MANAGEMENT_ORB_NOTIFY |
|
|
MANAGEMENT_ORB_FUNCTION(function) |
|
|
MANAGEMENT_ORB_LUN(lun);
|
|
orb->request.length =
|
|
MANAGEMENT_ORB_RESPONSE_LENGTH(sizeof(orb->response));
|
|
|
|
orb->request.status_fifo.high = sd->address_handler.offset >> 32;
|
|
orb->request.status_fifo.low = sd->address_handler.offset;
|
|
|
|
if (function == SBP2_LOGIN_REQUEST) {
|
|
orb->request.misc |=
|
|
MANAGEMENT_ORB_EXCLUSIVE(sbp2_param_exclusive_login) |
|
|
MANAGEMENT_ORB_RECONNECT(0);
|
|
}
|
|
|
|
fw_memcpy_to_be32(&orb->request, &orb->request, sizeof(orb->request));
|
|
|
|
init_completion(&orb->done);
|
|
orb->base.callback = complete_management_orb;
|
|
|
|
orb->base.request_bus =
|
|
dma_map_single(device->card->device, &orb->request,
|
|
sizeof(orb->request), DMA_TO_DEVICE);
|
|
if (dma_mapping_error(orb->base.request_bus))
|
|
goto fail_mapping_request;
|
|
|
|
sbp2_send_orb(&orb->base, unit,
|
|
node_id, generation, sd->management_agent_address);
|
|
|
|
wait_for_completion_timeout(&orb->done,
|
|
msecs_to_jiffies(SBP2_ORB_TIMEOUT));
|
|
|
|
retval = -EIO;
|
|
if (sbp2_cancel_orbs(unit) == 0) {
|
|
fw_error("orb reply timed out, rcode=0x%02x\n",
|
|
orb->base.rcode);
|
|
goto out;
|
|
}
|
|
|
|
if (orb->base.rcode != RCODE_COMPLETE) {
|
|
fw_error("management write failed, rcode 0x%02x\n",
|
|
orb->base.rcode);
|
|
goto out;
|
|
}
|
|
|
|
if (STATUS_GET_RESPONSE(orb->status) != 0 ||
|
|
STATUS_GET_SBP_STATUS(orb->status) != 0) {
|
|
fw_error("error status: %d:%d\n",
|
|
STATUS_GET_RESPONSE(orb->status),
|
|
STATUS_GET_SBP_STATUS(orb->status));
|
|
goto out;
|
|
}
|
|
|
|
retval = 0;
|
|
out:
|
|
dma_unmap_single(device->card->device, orb->base.request_bus,
|
|
sizeof(orb->request), DMA_TO_DEVICE);
|
|
fail_mapping_request:
|
|
dma_unmap_single(device->card->device, orb->response_bus,
|
|
sizeof(orb->response), DMA_FROM_DEVICE);
|
|
fail_mapping_response:
|
|
if (response)
|
|
fw_memcpy_from_be32(response,
|
|
orb->response, sizeof(orb->response));
|
|
kfree(orb);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static void
|
|
complete_agent_reset_write(struct fw_card *card, int rcode,
|
|
void *payload, size_t length, void *data)
|
|
{
|
|
struct fw_transaction *t = data;
|
|
|
|
kfree(t);
|
|
}
|
|
|
|
static int sbp2_agent_reset(struct fw_unit *unit)
|
|
{
|
|
struct fw_device *device = fw_device(unit->device.parent);
|
|
struct sbp2_device *sd = unit->device.driver_data;
|
|
struct fw_transaction *t;
|
|
static u32 zero;
|
|
|
|
t = kzalloc(sizeof(*t), GFP_ATOMIC);
|
|
if (t == NULL)
|
|
return -ENOMEM;
|
|
|
|
fw_send_request(device->card, t, TCODE_WRITE_QUADLET_REQUEST,
|
|
sd->node_id, sd->generation, device->max_speed,
|
|
sd->command_block_agent_address + SBP2_AGENT_RESET,
|
|
&zero, sizeof(zero), complete_agent_reset_write, t);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sbp2_reconnect(struct work_struct *work);
|
|
static struct scsi_host_template scsi_driver_template;
|
|
|
|
static void release_sbp2_device(struct kref *kref)
|
|
{
|
|
struct sbp2_device *sd = container_of(kref, struct sbp2_device, kref);
|
|
struct Scsi_Host *host =
|
|
container_of((void *)sd, struct Scsi_Host, hostdata[0]);
|
|
|
|
scsi_remove_host(host);
|
|
sbp2_send_management_orb(sd->unit, sd->node_id, sd->generation,
|
|
SBP2_LOGOUT_REQUEST, sd->login_id, NULL);
|
|
fw_core_remove_address_handler(&sd->address_handler);
|
|
fw_notify("removed sbp2 unit %s\n", sd->unit->device.bus_id);
|
|
put_device(&sd->unit->device);
|
|
scsi_host_put(host);
|
|
}
|
|
|
|
static void sbp2_login(struct work_struct *work)
|
|
{
|
|
struct sbp2_device *sd =
|
|
container_of(work, struct sbp2_device, work.work);
|
|
struct Scsi_Host *host =
|
|
container_of((void *)sd, struct Scsi_Host, hostdata[0]);
|
|
struct fw_unit *unit = sd->unit;
|
|
struct fw_device *device = fw_device(unit->device.parent);
|
|
struct sbp2_login_response response;
|
|
int generation, node_id, local_node_id, lun, retval;
|
|
|
|
/* FIXME: Make this work for multi-lun devices. */
|
|
lun = 0;
|
|
|
|
generation = device->card->generation;
|
|
node_id = device->node->node_id;
|
|
local_node_id = device->card->local_node->node_id;
|
|
|
|
if (sbp2_send_management_orb(unit, node_id, generation,
|
|
SBP2_LOGIN_REQUEST, lun, &response) < 0) {
|
|
if (sd->retries++ < 5) {
|
|
schedule_delayed_work(&sd->work, DIV_ROUND_UP(HZ, 5));
|
|
} else {
|
|
fw_error("failed to login to %s\n",
|
|
unit->device.bus_id);
|
|
kref_put(&sd->kref, release_sbp2_device);
|
|
}
|
|
return;
|
|
}
|
|
|
|
sd->generation = generation;
|
|
sd->node_id = node_id;
|
|
sd->address_high = local_node_id << 16;
|
|
|
|
/* Get command block agent offset and login id. */
|
|
sd->command_block_agent_address =
|
|
((u64) (response.command_block_agent.high & 0xffff) << 32) |
|
|
response.command_block_agent.low;
|
|
sd->login_id = LOGIN_RESPONSE_GET_LOGIN_ID(response);
|
|
|
|
fw_notify("logged in to sbp2 unit %s (%d retries)\n",
|
|
unit->device.bus_id, sd->retries);
|
|
fw_notify(" - management_agent_address: 0x%012llx\n",
|
|
(unsigned long long) sd->management_agent_address);
|
|
fw_notify(" - command_block_agent_address: 0x%012llx\n",
|
|
(unsigned long long) sd->command_block_agent_address);
|
|
fw_notify(" - status write address: 0x%012llx\n",
|
|
(unsigned long long) sd->address_handler.offset);
|
|
|
|
#if 0
|
|
/* FIXME: The linux1394 sbp2 does this last step. */
|
|
sbp2_set_busy_timeout(scsi_id);
|
|
#endif
|
|
|
|
PREPARE_DELAYED_WORK(&sd->work, sbp2_reconnect);
|
|
sbp2_agent_reset(unit);
|
|
|
|
/* FIXME: Loop over luns here. */
|
|
lun = 0;
|
|
retval = scsi_add_device(host, 0, 0, lun);
|
|
if (retval < 0) {
|
|
sbp2_send_management_orb(unit, sd->node_id, sd->generation,
|
|
SBP2_LOGOUT_REQUEST, sd->login_id,
|
|
NULL);
|
|
/*
|
|
* Set this back to sbp2_login so we fall back and
|
|
* retry login on bus reset.
|
|
*/
|
|
PREPARE_DELAYED_WORK(&sd->work, sbp2_login);
|
|
}
|
|
kref_put(&sd->kref, release_sbp2_device);
|
|
}
|
|
|
|
static int sbp2_probe(struct device *dev)
|
|
{
|
|
struct fw_unit *unit = fw_unit(dev);
|
|
struct fw_device *device = fw_device(unit->device.parent);
|
|
struct sbp2_device *sd;
|
|
struct fw_csr_iterator ci;
|
|
struct Scsi_Host *host;
|
|
int i, key, value, err;
|
|
u32 model, firmware_revision;
|
|
|
|
err = -ENOMEM;
|
|
host = scsi_host_alloc(&scsi_driver_template, sizeof(*sd));
|
|
if (host == NULL)
|
|
goto fail;
|
|
|
|
sd = (struct sbp2_device *) host->hostdata;
|
|
unit->device.driver_data = sd;
|
|
sd->unit = unit;
|
|
INIT_LIST_HEAD(&sd->orb_list);
|
|
kref_init(&sd->kref);
|
|
|
|
sd->address_handler.length = 0x100;
|
|
sd->address_handler.address_callback = sbp2_status_write;
|
|
sd->address_handler.callback_data = sd;
|
|
|
|
err = fw_core_add_address_handler(&sd->address_handler,
|
|
&fw_high_memory_region);
|
|
if (err < 0)
|
|
goto fail_host;
|
|
|
|
err = fw_device_enable_phys_dma(device);
|
|
if (err < 0)
|
|
goto fail_address_handler;
|
|
|
|
err = scsi_add_host(host, &unit->device);
|
|
if (err < 0)
|
|
goto fail_address_handler;
|
|
|
|
/*
|
|
* Scan unit directory to get management agent address,
|
|
* firmware revison and model. Initialize firmware_revision
|
|
* and model to values that wont match anything in our table.
|
|
*/
|
|
firmware_revision = 0xff000000;
|
|
model = 0xff000000;
|
|
fw_csr_iterator_init(&ci, unit->directory);
|
|
while (fw_csr_iterator_next(&ci, &key, &value)) {
|
|
switch (key) {
|
|
case CSR_DEPENDENT_INFO | CSR_OFFSET:
|
|
sd->management_agent_address =
|
|
0xfffff0000000ULL + 4 * value;
|
|
break;
|
|
case SBP2_FIRMWARE_REVISION:
|
|
firmware_revision = value;
|
|
break;
|
|
case CSR_MODEL:
|
|
model = value;
|
|
break;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(sbp2_workarounds_table); i++) {
|
|
if (sbp2_workarounds_table[i].firmware_revision !=
|
|
(firmware_revision & 0xffffff00))
|
|
continue;
|
|
if (sbp2_workarounds_table[i].model != model &&
|
|
sbp2_workarounds_table[i].model != ~0)
|
|
continue;
|
|
sd->workarounds |= sbp2_workarounds_table[i].workarounds;
|
|
break;
|
|
}
|
|
|
|
if (sd->workarounds)
|
|
fw_notify("Workarounds for node %s: 0x%x "
|
|
"(firmware_revision 0x%06x, model_id 0x%06x)\n",
|
|
unit->device.bus_id,
|
|
sd->workarounds, firmware_revision, model);
|
|
|
|
get_device(&unit->device);
|
|
|
|
/*
|
|
* We schedule work to do the login so we can easily
|
|
* reschedule retries. Always get the ref before scheduling
|
|
* work.
|
|
*/
|
|
INIT_DELAYED_WORK(&sd->work, sbp2_login);
|
|
if (schedule_delayed_work(&sd->work, 0))
|
|
kref_get(&sd->kref);
|
|
|
|
return 0;
|
|
|
|
fail_address_handler:
|
|
fw_core_remove_address_handler(&sd->address_handler);
|
|
fail_host:
|
|
scsi_host_put(host);
|
|
fail:
|
|
return err;
|
|
}
|
|
|
|
static int sbp2_remove(struct device *dev)
|
|
{
|
|
struct fw_unit *unit = fw_unit(dev);
|
|
struct sbp2_device *sd = unit->device.driver_data;
|
|
|
|
kref_put(&sd->kref, release_sbp2_device);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sbp2_reconnect(struct work_struct *work)
|
|
{
|
|
struct sbp2_device *sd =
|
|
container_of(work, struct sbp2_device, work.work);
|
|
struct fw_unit *unit = sd->unit;
|
|
struct fw_device *device = fw_device(unit->device.parent);
|
|
int generation, node_id, local_node_id;
|
|
|
|
generation = device->card->generation;
|
|
node_id = device->node->node_id;
|
|
local_node_id = device->card->local_node->node_id;
|
|
|
|
if (sbp2_send_management_orb(unit, node_id, generation,
|
|
SBP2_RECONNECT_REQUEST,
|
|
sd->login_id, NULL) < 0) {
|
|
if (sd->retries++ >= 5) {
|
|
fw_error("failed to reconnect to %s\n",
|
|
unit->device.bus_id);
|
|
/* Fall back and try to log in again. */
|
|
sd->retries = 0;
|
|
PREPARE_DELAYED_WORK(&sd->work, sbp2_login);
|
|
}
|
|
schedule_delayed_work(&sd->work, DIV_ROUND_UP(HZ, 5));
|
|
return;
|
|
}
|
|
|
|
sd->generation = generation;
|
|
sd->node_id = node_id;
|
|
sd->address_high = local_node_id << 16;
|
|
|
|
fw_notify("reconnected to unit %s (%d retries)\n",
|
|
unit->device.bus_id, sd->retries);
|
|
sbp2_agent_reset(unit);
|
|
sbp2_cancel_orbs(unit);
|
|
kref_put(&sd->kref, release_sbp2_device);
|
|
}
|
|
|
|
static void sbp2_update(struct fw_unit *unit)
|
|
{
|
|
struct fw_device *device = fw_device(unit->device.parent);
|
|
struct sbp2_device *sd = unit->device.driver_data;
|
|
|
|
sd->retries = 0;
|
|
fw_device_enable_phys_dma(device);
|
|
if (schedule_delayed_work(&sd->work, 0))
|
|
kref_get(&sd->kref);
|
|
}
|
|
|
|
#define SBP2_UNIT_SPEC_ID_ENTRY 0x0000609e
|
|
#define SBP2_SW_VERSION_ENTRY 0x00010483
|
|
|
|
static const struct fw_device_id sbp2_id_table[] = {
|
|
{
|
|
.match_flags = FW_MATCH_SPECIFIER_ID | FW_MATCH_VERSION,
|
|
.specifier_id = SBP2_UNIT_SPEC_ID_ENTRY,
|
|
.version = SBP2_SW_VERSION_ENTRY,
|
|
},
|
|
{ }
|
|
};
|
|
|
|
static struct fw_driver sbp2_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = sbp2_driver_name,
|
|
.bus = &fw_bus_type,
|
|
.probe = sbp2_probe,
|
|
.remove = sbp2_remove,
|
|
},
|
|
.update = sbp2_update,
|
|
.id_table = sbp2_id_table,
|
|
};
|
|
|
|
static unsigned int
|
|
sbp2_status_to_sense_data(u8 *sbp2_status, u8 *sense_data)
|
|
{
|
|
int sam_status;
|
|
|
|
sense_data[0] = 0x70;
|
|
sense_data[1] = 0x0;
|
|
sense_data[2] = sbp2_status[1];
|
|
sense_data[3] = sbp2_status[4];
|
|
sense_data[4] = sbp2_status[5];
|
|
sense_data[5] = sbp2_status[6];
|
|
sense_data[6] = sbp2_status[7];
|
|
sense_data[7] = 10;
|
|
sense_data[8] = sbp2_status[8];
|
|
sense_data[9] = sbp2_status[9];
|
|
sense_data[10] = sbp2_status[10];
|
|
sense_data[11] = sbp2_status[11];
|
|
sense_data[12] = sbp2_status[2];
|
|
sense_data[13] = sbp2_status[3];
|
|
sense_data[14] = sbp2_status[12];
|
|
sense_data[15] = sbp2_status[13];
|
|
|
|
sam_status = sbp2_status[0] & 0x3f;
|
|
|
|
switch (sam_status) {
|
|
case SAM_STAT_GOOD:
|
|
case SAM_STAT_CHECK_CONDITION:
|
|
case SAM_STAT_CONDITION_MET:
|
|
case SAM_STAT_BUSY:
|
|
case SAM_STAT_RESERVATION_CONFLICT:
|
|
case SAM_STAT_COMMAND_TERMINATED:
|
|
return DID_OK << 16 | sam_status;
|
|
|
|
default:
|
|
return DID_ERROR << 16;
|
|
}
|
|
}
|
|
|
|
static void
|
|
complete_command_orb(struct sbp2_orb *base_orb, struct sbp2_status *status)
|
|
{
|
|
struct sbp2_command_orb *orb =
|
|
container_of(base_orb, struct sbp2_command_orb, base);
|
|
struct fw_unit *unit = orb->unit;
|
|
struct fw_device *device = fw_device(unit->device.parent);
|
|
int result;
|
|
|
|
if (status != NULL) {
|
|
if (STATUS_GET_DEAD(*status))
|
|
sbp2_agent_reset(unit);
|
|
|
|
switch (STATUS_GET_RESPONSE(*status)) {
|
|
case SBP2_STATUS_REQUEST_COMPLETE:
|
|
result = DID_OK << 16;
|
|
break;
|
|
case SBP2_STATUS_TRANSPORT_FAILURE:
|
|
result = DID_BUS_BUSY << 16;
|
|
break;
|
|
case SBP2_STATUS_ILLEGAL_REQUEST:
|
|
case SBP2_STATUS_VENDOR_DEPENDENT:
|
|
default:
|
|
result = DID_ERROR << 16;
|
|
break;
|
|
}
|
|
|
|
if (result == DID_OK << 16 && STATUS_GET_LEN(*status) > 1)
|
|
result = sbp2_status_to_sense_data(STATUS_GET_DATA(*status),
|
|
orb->cmd->sense_buffer);
|
|
} else {
|
|
/*
|
|
* If the orb completes with status == NULL, something
|
|
* went wrong, typically a bus reset happened mid-orb
|
|
* or when sending the write (less likely).
|
|
*/
|
|
result = DID_BUS_BUSY << 16;
|
|
}
|
|
|
|
dma_unmap_single(device->card->device, orb->base.request_bus,
|
|
sizeof(orb->request), DMA_TO_DEVICE);
|
|
|
|
if (scsi_sg_count(orb->cmd) > 0)
|
|
dma_unmap_sg(device->card->device, scsi_sglist(orb->cmd),
|
|
scsi_sg_count(orb->cmd),
|
|
orb->cmd->sc_data_direction);
|
|
|
|
if (orb->page_table_bus != 0)
|
|
dma_unmap_single(device->card->device, orb->page_table_bus,
|
|
sizeof(orb->page_table), DMA_TO_DEVICE);
|
|
|
|
orb->cmd->result = result;
|
|
orb->done(orb->cmd);
|
|
kfree(orb);
|
|
}
|
|
|
|
static int sbp2_command_orb_map_scatterlist(struct sbp2_command_orb *orb)
|
|
{
|
|
struct sbp2_device *sd =
|
|
(struct sbp2_device *)orb->cmd->device->host->hostdata;
|
|
struct fw_unit *unit = sd->unit;
|
|
struct fw_device *device = fw_device(unit->device.parent);
|
|
struct scatterlist *sg;
|
|
int sg_len, l, i, j, count;
|
|
dma_addr_t sg_addr;
|
|
|
|
sg = scsi_sglist(orb->cmd);
|
|
count = dma_map_sg(device->card->device, sg, scsi_sg_count(orb->cmd),
|
|
orb->cmd->sc_data_direction);
|
|
if (count == 0)
|
|
goto fail;
|
|
|
|
/*
|
|
* Handle the special case where there is only one element in
|
|
* the scatter list by converting it to an immediate block
|
|
* request. This is also a workaround for broken devices such
|
|
* as the second generation iPod which doesn't support page
|
|
* tables.
|
|
*/
|
|
if (count == 1 && sg_dma_len(sg) < SBP2_MAX_SG_ELEMENT_LENGTH) {
|
|
orb->request.data_descriptor.high = sd->address_high;
|
|
orb->request.data_descriptor.low = sg_dma_address(sg);
|
|
orb->request.misc |=
|
|
COMMAND_ORB_DATA_SIZE(sg_dma_len(sg));
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Convert the scatterlist to an sbp2 page table. If any
|
|
* scatterlist entries are too big for sbp2, we split them as we
|
|
* go. Even if we ask the block I/O layer to not give us sg
|
|
* elements larger than 65535 bytes, some IOMMUs may merge sg elements
|
|
* during DMA mapping, and Linux currently doesn't prevent this.
|
|
*/
|
|
for (i = 0, j = 0; i < count; i++) {
|
|
sg_len = sg_dma_len(sg + i);
|
|
sg_addr = sg_dma_address(sg + i);
|
|
while (sg_len) {
|
|
/* FIXME: This won't get us out of the pinch. */
|
|
if (unlikely(j >= ARRAY_SIZE(orb->page_table))) {
|
|
fw_error("page table overflow\n");
|
|
goto fail_page_table;
|
|
}
|
|
l = min(sg_len, SBP2_MAX_SG_ELEMENT_LENGTH);
|
|
orb->page_table[j].low = sg_addr;
|
|
orb->page_table[j].high = (l << 16);
|
|
sg_addr += l;
|
|
sg_len -= l;
|
|
j++;
|
|
}
|
|
}
|
|
|
|
fw_memcpy_to_be32(orb->page_table, orb->page_table,
|
|
sizeof(orb->page_table[0]) * j);
|
|
orb->page_table_bus =
|
|
dma_map_single(device->card->device, orb->page_table,
|
|
sizeof(orb->page_table), DMA_TO_DEVICE);
|
|
if (dma_mapping_error(orb->page_table_bus))
|
|
goto fail_page_table;
|
|
|
|
/*
|
|
* The data_descriptor pointer is the one case where we need
|
|
* to fill in the node ID part of the address. All other
|
|
* pointers assume that the data referenced reside on the
|
|
* initiator (i.e. us), but data_descriptor can refer to data
|
|
* on other nodes so we need to put our ID in descriptor.high.
|
|
*/
|
|
orb->request.data_descriptor.high = sd->address_high;
|
|
orb->request.data_descriptor.low = orb->page_table_bus;
|
|
orb->request.misc |=
|
|
COMMAND_ORB_PAGE_TABLE_PRESENT |
|
|
COMMAND_ORB_DATA_SIZE(j);
|
|
|
|
return 0;
|
|
|
|
fail_page_table:
|
|
dma_unmap_sg(device->card->device, sg, scsi_sg_count(orb->cmd),
|
|
orb->cmd->sc_data_direction);
|
|
fail:
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* SCSI stack integration */
|
|
|
|
static int sbp2_scsi_queuecommand(struct scsi_cmnd *cmd, scsi_done_fn_t done)
|
|
{
|
|
struct sbp2_device *sd =
|
|
(struct sbp2_device *)cmd->device->host->hostdata;
|
|
struct fw_unit *unit = sd->unit;
|
|
struct fw_device *device = fw_device(unit->device.parent);
|
|
struct sbp2_command_orb *orb;
|
|
unsigned max_payload;
|
|
|
|
/*
|
|
* Bidirectional commands are not yet implemented, and unknown
|
|
* transfer direction not handled.
|
|
*/
|
|
if (cmd->sc_data_direction == DMA_BIDIRECTIONAL) {
|
|
fw_error("Can't handle DMA_BIDIRECTIONAL, rejecting command\n");
|
|
cmd->result = DID_ERROR << 16;
|
|
done(cmd);
|
|
return 0;
|
|
}
|
|
|
|
orb = kzalloc(sizeof(*orb), GFP_ATOMIC);
|
|
if (orb == NULL) {
|
|
fw_notify("failed to alloc orb\n");
|
|
goto fail_alloc;
|
|
}
|
|
|
|
/* Initialize rcode to something not RCODE_COMPLETE. */
|
|
orb->base.rcode = -1;
|
|
|
|
orb->unit = unit;
|
|
orb->done = done;
|
|
orb->cmd = cmd;
|
|
|
|
orb->request.next.high = SBP2_ORB_NULL;
|
|
orb->request.next.low = 0x0;
|
|
/*
|
|
* At speed 100 we can do 512 bytes per packet, at speed 200,
|
|
* 1024 bytes per packet etc. The SBP-2 max_payload field
|
|
* specifies the max payload size as 2 ^ (max_payload + 2), so
|
|
* if we set this to max_speed + 7, we get the right value.
|
|
*/
|
|
max_payload = min(device->max_speed + 7,
|
|
device->card->max_receive - 1);
|
|
orb->request.misc =
|
|
COMMAND_ORB_MAX_PAYLOAD(max_payload) |
|
|
COMMAND_ORB_SPEED(device->max_speed) |
|
|
COMMAND_ORB_NOTIFY;
|
|
|
|
if (cmd->sc_data_direction == DMA_FROM_DEVICE)
|
|
orb->request.misc |=
|
|
COMMAND_ORB_DIRECTION(SBP2_DIRECTION_FROM_MEDIA);
|
|
else if (cmd->sc_data_direction == DMA_TO_DEVICE)
|
|
orb->request.misc |=
|
|
COMMAND_ORB_DIRECTION(SBP2_DIRECTION_TO_MEDIA);
|
|
|
|
if (scsi_sg_count(cmd) && sbp2_command_orb_map_scatterlist(orb) < 0)
|
|
goto fail_mapping;
|
|
|
|
fw_memcpy_to_be32(&orb->request, &orb->request, sizeof(orb->request));
|
|
|
|
memset(orb->request.command_block,
|
|
0, sizeof(orb->request.command_block));
|
|
memcpy(orb->request.command_block, cmd->cmnd, COMMAND_SIZE(*cmd->cmnd));
|
|
|
|
orb->base.callback = complete_command_orb;
|
|
orb->base.request_bus =
|
|
dma_map_single(device->card->device, &orb->request,
|
|
sizeof(orb->request), DMA_TO_DEVICE);
|
|
if (dma_mapping_error(orb->base.request_bus))
|
|
goto fail_mapping;
|
|
|
|
sbp2_send_orb(&orb->base, unit, sd->node_id, sd->generation,
|
|
sd->command_block_agent_address + SBP2_ORB_POINTER);
|
|
|
|
return 0;
|
|
|
|
fail_mapping:
|
|
kfree(orb);
|
|
fail_alloc:
|
|
return SCSI_MLQUEUE_HOST_BUSY;
|
|
}
|
|
|
|
static int sbp2_scsi_slave_alloc(struct scsi_device *sdev)
|
|
{
|
|
struct sbp2_device *sd = (struct sbp2_device *)sdev->host->hostdata;
|
|
|
|
sdev->allow_restart = 1;
|
|
|
|
if (sd->workarounds & SBP2_WORKAROUND_INQUIRY_36)
|
|
sdev->inquiry_len = 36;
|
|
return 0;
|
|
}
|
|
|
|
static int sbp2_scsi_slave_configure(struct scsi_device *sdev)
|
|
{
|
|
struct sbp2_device *sd = (struct sbp2_device *)sdev->host->hostdata;
|
|
struct fw_unit *unit = sd->unit;
|
|
|
|
sdev->use_10_for_rw = 1;
|
|
|
|
if (sdev->type == TYPE_ROM)
|
|
sdev->use_10_for_ms = 1;
|
|
if (sdev->type == TYPE_DISK &&
|
|
sd->workarounds & SBP2_WORKAROUND_MODE_SENSE_8)
|
|
sdev->skip_ms_page_8 = 1;
|
|
if (sd->workarounds & SBP2_WORKAROUND_FIX_CAPACITY) {
|
|
fw_notify("setting fix_capacity for %s\n", unit->device.bus_id);
|
|
sdev->fix_capacity = 1;
|
|
}
|
|
if (sd->workarounds & SBP2_WORKAROUND_128K_MAX_TRANS)
|
|
blk_queue_max_sectors(sdev->request_queue, 128 * 1024 / 512);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Called by scsi stack when something has really gone wrong. Usually
|
|
* called when a command has timed-out for some reason.
|
|
*/
|
|
static int sbp2_scsi_abort(struct scsi_cmnd *cmd)
|
|
{
|
|
struct sbp2_device *sd =
|
|
(struct sbp2_device *)cmd->device->host->hostdata;
|
|
struct fw_unit *unit = sd->unit;
|
|
|
|
fw_notify("sbp2_scsi_abort\n");
|
|
sbp2_agent_reset(unit);
|
|
sbp2_cancel_orbs(unit);
|
|
|
|
return SUCCESS;
|
|
}
|
|
|
|
/*
|
|
* Format of /sys/bus/scsi/devices/.../ieee1394_id:
|
|
* u64 EUI-64 : u24 directory_ID : u16 LUN (all printed in hexadecimal)
|
|
*
|
|
* This is the concatenation of target port identifier and logical unit
|
|
* identifier as per SAM-2...SAM-4 annex A.
|
|
*/
|
|
static ssize_t
|
|
sbp2_sysfs_ieee1394_id_show(struct device *dev, struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct scsi_device *sdev = to_scsi_device(dev);
|
|
struct sbp2_device *sd;
|
|
struct fw_unit *unit;
|
|
struct fw_device *device;
|
|
u32 directory_id;
|
|
struct fw_csr_iterator ci;
|
|
int key, value, lun;
|
|
|
|
if (!sdev)
|
|
return 0;
|
|
sd = (struct sbp2_device *)sdev->host->hostdata;
|
|
unit = sd->unit;
|
|
device = fw_device(unit->device.parent);
|
|
|
|
/* implicit directory ID */
|
|
directory_id = ((unit->directory - device->config_rom) * 4
|
|
+ CSR_CONFIG_ROM) & 0xffffff;
|
|
|
|
/* explicit directory ID, overrides implicit ID if present */
|
|
fw_csr_iterator_init(&ci, unit->directory);
|
|
while (fw_csr_iterator_next(&ci, &key, &value))
|
|
if (key == CSR_DIRECTORY_ID) {
|
|
directory_id = value;
|
|
break;
|
|
}
|
|
|
|
/* FIXME: Make this work for multi-lun devices. */
|
|
lun = 0;
|
|
|
|
return sprintf(buf, "%08x%08x:%06x:%04x\n",
|
|
device->config_rom[3], device->config_rom[4],
|
|
directory_id, lun);
|
|
}
|
|
|
|
static DEVICE_ATTR(ieee1394_id, S_IRUGO, sbp2_sysfs_ieee1394_id_show, NULL);
|
|
|
|
static struct device_attribute *sbp2_scsi_sysfs_attrs[] = {
|
|
&dev_attr_ieee1394_id,
|
|
NULL
|
|
};
|
|
|
|
static struct scsi_host_template scsi_driver_template = {
|
|
.module = THIS_MODULE,
|
|
.name = "SBP-2 IEEE-1394",
|
|
.proc_name = sbp2_driver_name,
|
|
.queuecommand = sbp2_scsi_queuecommand,
|
|
.slave_alloc = sbp2_scsi_slave_alloc,
|
|
.slave_configure = sbp2_scsi_slave_configure,
|
|
.eh_abort_handler = sbp2_scsi_abort,
|
|
.this_id = -1,
|
|
.sg_tablesize = SG_ALL,
|
|
.use_clustering = ENABLE_CLUSTERING,
|
|
.cmd_per_lun = 1,
|
|
.can_queue = 1,
|
|
.sdev_attrs = sbp2_scsi_sysfs_attrs,
|
|
};
|
|
|
|
MODULE_AUTHOR("Kristian Hoegsberg <krh@bitplanet.net>");
|
|
MODULE_DESCRIPTION("SCSI over IEEE1394");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(ieee1394, sbp2_id_table);
|
|
|
|
/* Provide a module alias so root-on-sbp2 initrds don't break. */
|
|
#ifndef CONFIG_IEEE1394_SBP2_MODULE
|
|
MODULE_ALIAS("sbp2");
|
|
#endif
|
|
|
|
static int __init sbp2_init(void)
|
|
{
|
|
return driver_register(&sbp2_driver.driver);
|
|
}
|
|
|
|
static void __exit sbp2_cleanup(void)
|
|
{
|
|
driver_unregister(&sbp2_driver.driver);
|
|
}
|
|
|
|
module_init(sbp2_init);
|
|
module_exit(sbp2_cleanup);
|