![Tony Lindgren](/assets/img/avatar_default.png)
Conflicts: arch/arm/mach-omap2/board-3430sdp.c arch/arm/mach-omap2/board-h4.c arch/arm/mach-omap2/board-rx51-peripherals.c arch/arm/mach-omap2/board-rx51.c arch/arm/mach-omap2/pm34xx.c drivers/mtd/nand/omap2.c drivers/mtd/onenand/omap2.c
391 lines
9.6 KiB
C
391 lines
9.6 KiB
C
/*
|
|
* linux/arch/arm/mach-omap2/board-h4.c
|
|
*
|
|
* Copyright (C) 2005 Nokia Corporation
|
|
* Author: Paul Mundt <paul.mundt@nokia.com>
|
|
*
|
|
* Modified from mach-omap/omap1/board-generic.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/mtd/physmap.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c/at24.h>
|
|
#include <linux/input.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/input/matrix_keypad.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <plat/menelaus.h>
|
|
#include <plat-omap/dma-omap.h>
|
|
#include "debug-devices.h"
|
|
|
|
#include <video/omapdss.h>
|
|
#include <video/omap-panel-generic-dpi.h>
|
|
|
|
#include "common.h"
|
|
#include "mux.h"
|
|
#include "control.h"
|
|
#include "gpmc.h"
|
|
|
|
#define H4_FLASH_CS 0
|
|
#define H4_SMC91X_CS 1
|
|
|
|
#define H4_ETHR_GPIO_IRQ 92
|
|
|
|
#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE)
|
|
static const uint32_t board_matrix_keys[] = {
|
|
KEY(0, 0, KEY_LEFT),
|
|
KEY(1, 0, KEY_RIGHT),
|
|
KEY(2, 0, KEY_A),
|
|
KEY(3, 0, KEY_B),
|
|
KEY(4, 0, KEY_C),
|
|
KEY(0, 1, KEY_DOWN),
|
|
KEY(1, 1, KEY_UP),
|
|
KEY(2, 1, KEY_E),
|
|
KEY(3, 1, KEY_F),
|
|
KEY(4, 1, KEY_G),
|
|
KEY(0, 2, KEY_ENTER),
|
|
KEY(1, 2, KEY_I),
|
|
KEY(2, 2, KEY_J),
|
|
KEY(3, 2, KEY_K),
|
|
KEY(4, 2, KEY_3),
|
|
KEY(0, 3, KEY_M),
|
|
KEY(1, 3, KEY_N),
|
|
KEY(2, 3, KEY_O),
|
|
KEY(3, 3, KEY_P),
|
|
KEY(4, 3, KEY_Q),
|
|
KEY(0, 4, KEY_R),
|
|
KEY(1, 4, KEY_4),
|
|
KEY(2, 4, KEY_T),
|
|
KEY(3, 4, KEY_U),
|
|
KEY(4, 4, KEY_ENTER),
|
|
KEY(0, 5, KEY_V),
|
|
KEY(1, 5, KEY_W),
|
|
KEY(2, 5, KEY_L),
|
|
KEY(3, 5, KEY_S),
|
|
KEY(4, 5, KEY_ENTER),
|
|
};
|
|
|
|
static const struct matrix_keymap_data board_keymap_data = {
|
|
.keymap = board_matrix_keys,
|
|
.keymap_size = ARRAY_SIZE(board_matrix_keys),
|
|
};
|
|
|
|
static unsigned int board_keypad_row_gpios[] = {
|
|
88, 89, 124, 11, 6, 96
|
|
};
|
|
|
|
static unsigned int board_keypad_col_gpios[] = {
|
|
90, 91, 100, 36, 12, 97, 98
|
|
};
|
|
|
|
static struct matrix_keypad_platform_data board_keypad_platform_data = {
|
|
.keymap_data = &board_keymap_data,
|
|
.row_gpios = board_keypad_row_gpios,
|
|
.num_row_gpios = ARRAY_SIZE(board_keypad_row_gpios),
|
|
.col_gpios = board_keypad_col_gpios,
|
|
.num_col_gpios = ARRAY_SIZE(board_keypad_col_gpios),
|
|
.active_low = 1,
|
|
|
|
.debounce_ms = 20,
|
|
.col_scan_delay_us = 5,
|
|
};
|
|
|
|
static struct platform_device board_keyboard = {
|
|
.name = "matrix-keypad",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &board_keypad_platform_data,
|
|
},
|
|
};
|
|
static void __init board_mkp_init(void)
|
|
{
|
|
omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP);
|
|
omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP);
|
|
omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP);
|
|
omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP);
|
|
if (omap_has_menelaus()) {
|
|
omap_mux_init_signal("sdrc_a14.gpio0",
|
|
OMAP_PULL_ENA | OMAP_PULL_UP);
|
|
omap_mux_init_signal("vlynq_rx0.gpio_15", 0);
|
|
omap_mux_init_signal("gpio_98", 0);
|
|
board_keypad_row_gpios[5] = 0;
|
|
board_keypad_col_gpios[2] = 15;
|
|
board_keypad_col_gpios[6] = 18;
|
|
} else {
|
|
omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP);
|
|
omap_mux_init_signal("gpio_100", 0);
|
|
omap_mux_init_signal("gpio_98", 0);
|
|
}
|
|
omap_mux_init_signal("gpio_90", 0);
|
|
omap_mux_init_signal("gpio_91", 0);
|
|
omap_mux_init_signal("gpio_36", 0);
|
|
omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0);
|
|
omap_mux_init_signal("gpio_97", 0);
|
|
|
|
platform_device_register(&board_keyboard);
|
|
}
|
|
#else
|
|
static inline void board_mkp_init(void)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
static struct mtd_partition h4_partitions[] = {
|
|
/* bootloader (U-Boot, etc) in first sector */
|
|
{
|
|
.name = "bootloader",
|
|
.offset = 0,
|
|
.size = SZ_128K,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
/* bootloader params in the next sector */
|
|
{
|
|
.name = "params",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_128K,
|
|
.mask_flags = 0,
|
|
},
|
|
/* kernel */
|
|
{
|
|
.name = "kernel",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = SZ_2M,
|
|
.mask_flags = 0
|
|
},
|
|
/* file system */
|
|
{
|
|
.name = "filesystem",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
.mask_flags = 0
|
|
}
|
|
};
|
|
|
|
static struct physmap_flash_data h4_flash_data = {
|
|
.width = 2,
|
|
.parts = h4_partitions,
|
|
.nr_parts = ARRAY_SIZE(h4_partitions),
|
|
};
|
|
|
|
static struct resource h4_flash_resource = {
|
|
.flags = IORESOURCE_MEM,
|
|
};
|
|
|
|
static struct platform_device h4_flash_device = {
|
|
.name = "physmap-flash",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &h4_flash_data,
|
|
},
|
|
.num_resources = 1,
|
|
.resource = &h4_flash_resource,
|
|
};
|
|
|
|
static struct platform_device *h4_devices[] __initdata = {
|
|
&h4_flash_device,
|
|
};
|
|
|
|
static struct panel_generic_dpi_data h4_panel_data = {
|
|
.name = "h4",
|
|
};
|
|
|
|
static struct omap_dss_device h4_lcd_device = {
|
|
.name = "lcd",
|
|
.driver_name = "generic_dpi_panel",
|
|
.type = OMAP_DISPLAY_TYPE_DPI,
|
|
.phy.dpi.data_lines = 16,
|
|
.data = &h4_panel_data,
|
|
};
|
|
|
|
static struct omap_dss_device *h4_dss_devices[] = {
|
|
&h4_lcd_device,
|
|
};
|
|
|
|
static struct omap_dss_board_info h4_dss_data = {
|
|
.num_devices = ARRAY_SIZE(h4_dss_devices),
|
|
.devices = h4_dss_devices,
|
|
.default_device = &h4_lcd_device,
|
|
};
|
|
|
|
/* 2420 Sysboot setup (2430 is different) */
|
|
static u32 get_sysboot_value(void)
|
|
{
|
|
return (omap_ctrl_readl(OMAP24XX_CONTROL_STATUS) &
|
|
(OMAP2_SYSBOOT_5_MASK | OMAP2_SYSBOOT_4_MASK |
|
|
OMAP2_SYSBOOT_3_MASK | OMAP2_SYSBOOT_2_MASK |
|
|
OMAP2_SYSBOOT_1_MASK | OMAP2_SYSBOOT_0_MASK));
|
|
}
|
|
|
|
/* H4-2420's always used muxed mode, H4-2422's always use non-muxed
|
|
*
|
|
* Note: OMAP-GIT doesn't correctly do is_cpu_omap2422 and is_cpu_omap2423
|
|
* correctly. The macro needs to look at production_id not just hawkeye.
|
|
*/
|
|
static u32 is_gpmc_muxed(void)
|
|
{
|
|
u32 mux;
|
|
mux = get_sysboot_value();
|
|
if ((mux & 0xF) == 0xd)
|
|
return 1; /* NAND config (could be either) */
|
|
if (mux & 0x2) /* if mux'ed */
|
|
return 1;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static inline void __init h4_init_debug(void)
|
|
{
|
|
int eth_cs;
|
|
unsigned long cs_mem_base;
|
|
unsigned int muxed, rate;
|
|
struct clk *gpmc_fck;
|
|
|
|
eth_cs = H4_SMC91X_CS;
|
|
|
|
gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */
|
|
if (IS_ERR(gpmc_fck)) {
|
|
WARN_ON(1);
|
|
return;
|
|
}
|
|
|
|
clk_prepare_enable(gpmc_fck);
|
|
rate = clk_get_rate(gpmc_fck);
|
|
clk_disable_unprepare(gpmc_fck);
|
|
clk_put(gpmc_fck);
|
|
|
|
if (is_gpmc_muxed())
|
|
muxed = 0x200;
|
|
else
|
|
muxed = 0;
|
|
|
|
/* Make sure CS1 timings are correct */
|
|
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1,
|
|
0x00011000 | muxed);
|
|
|
|
if (rate >= 160000000) {
|
|
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
|
|
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
|
|
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
|
|
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
|
|
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
|
|
} else if (rate >= 130000000) {
|
|
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
|
|
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
|
|
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
|
|
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
|
|
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
|
|
} else {/* rate = 100000000 */
|
|
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
|
|
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
|
|
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
|
|
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
|
|
gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
|
|
}
|
|
|
|
if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
|
|
printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
|
|
goto out;
|
|
}
|
|
|
|
udelay(100);
|
|
|
|
omap_mux_init_gpio(92, 0);
|
|
if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0)
|
|
gpmc_cs_free(eth_cs);
|
|
|
|
out:
|
|
clk_disable_unprepare(gpmc_fck);
|
|
clk_put(gpmc_fck);
|
|
}
|
|
|
|
static void __init h4_init_flash(void)
|
|
{
|
|
unsigned long base;
|
|
|
|
if (gpmc_cs_request(H4_FLASH_CS, SZ_64M, &base) < 0) {
|
|
printk("Can't request GPMC CS for flash\n");
|
|
return;
|
|
}
|
|
h4_flash_resource.start = base;
|
|
h4_flash_resource.end = base + SZ_64M - 1;
|
|
}
|
|
|
|
static struct at24_platform_data m24c01 = {
|
|
.byte_len = SZ_1K / 8,
|
|
.page_size = 16,
|
|
};
|
|
|
|
static struct i2c_board_info __initdata h4_i2c_board_info[] = {
|
|
{
|
|
I2C_BOARD_INFO("isp1301_omap", 0x2d),
|
|
},
|
|
{ /* EEPROM on mainboard */
|
|
I2C_BOARD_INFO("24c01", 0x52),
|
|
.platform_data = &m24c01,
|
|
},
|
|
{ /* EEPROM on cpu card */
|
|
I2C_BOARD_INFO("24c01", 0x57),
|
|
.platform_data = &m24c01,
|
|
},
|
|
};
|
|
|
|
#ifdef CONFIG_OMAP_MUX
|
|
static struct omap_board_mux board_mux[] __initdata = {
|
|
{ .reg_offset = OMAP_MUX_TERMINATOR },
|
|
};
|
|
#endif
|
|
|
|
static void __init omap_h4_init(void)
|
|
{
|
|
omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF);
|
|
|
|
/*
|
|
* Make sure the serial ports are muxed on at this point.
|
|
* You have to mux them off in device drivers later on
|
|
* if not needed.
|
|
*/
|
|
|
|
board_mkp_init();
|
|
h4_i2c_board_info[0].irq = gpio_to_irq(125);
|
|
i2c_register_board_info(1, h4_i2c_board_info,
|
|
ARRAY_SIZE(h4_i2c_board_info));
|
|
|
|
platform_add_devices(h4_devices, ARRAY_SIZE(h4_devices));
|
|
omap_serial_init();
|
|
omap_sdrc_init(NULL, NULL);
|
|
h4_init_flash();
|
|
|
|
omap_display_init(&h4_dss_data);
|
|
}
|
|
|
|
MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
|
|
/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
|
|
.atag_offset = 0x100,
|
|
.reserve = omap_reserve,
|
|
.map_io = omap242x_map_io,
|
|
.init_early = omap2420_init_early,
|
|
.init_irq = omap2_init_irq,
|
|
.handle_irq = omap2_intc_handle_irq,
|
|
.init_machine = omap_h4_init,
|
|
.init_late = omap2420_init_late,
|
|
.timer = &omap2_timer,
|
|
.restart = omap_prcm_restart,
|
|
MACHINE_END
|