alistair23-linux/drivers/net/wireless/ath/wil6210/fw.h
Lior David 13cd9f758a wil6210: extract firmware version from file header
Currently the FW version is taken from the sw_version field
of the FW ready event. This version is based on internal
version control revision and it is difficult to map to actual
FW version.
Fix this by using the actual FW version stored in the FW file
header record.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-08-31 10:31:16 +03:00

162 lines
5.3 KiB
C

/*
* Copyright (c) 2014,2016 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#define WIL_FW_SIGNATURE (0x36323130) /* '0126' */
#define WIL_FW_FMT_VERSION (1) /* format version driver supports */
enum wil_fw_record_type {
wil_fw_type_comment = 1,
wil_fw_type_data = 2,
wil_fw_type_fill = 3,
wil_fw_type_action = 4,
wil_fw_type_verify = 5,
wil_fw_type_file_header = 6,
wil_fw_type_direct_write = 7,
wil_fw_type_gateway_data = 8,
wil_fw_type_gateway_data4 = 9,
};
struct wil_fw_record_head {
__le16 type; /* enum wil_fw_record_type */
__le16 flags; /* to be defined */
__le32 size; /* whole record, bytes after head */
} __packed;
/* data block. write starting from @addr
* data_size inferred from the @head.size. For this case,
* data_size = @head.size - offsetof(struct wil_fw_record_data, data)
*/
struct wil_fw_record_data { /* type == wil_fw_type_data */
__le32 addr;
__le32 data[0]; /* [data_size], see above */
} __packed;
/* fill with constant @value, @size bytes starting from @addr */
struct wil_fw_record_fill { /* type == wil_fw_type_fill */
__le32 addr;
__le32 value;
__le32 size;
} __packed;
/* free-form comment
* for informational purpose, data_size is @head.size from record header
*/
struct wil_fw_record_comment { /* type == wil_fw_type_comment */
u8 data[0]; /* free-form data [data_size], see above */
} __packed;
/* FW capabilities encoded inside a comment record */
#define WIL_FW_CAPABILITIES_MAGIC (0xabcddcba)
struct wil_fw_record_capabilities { /* type == wil_fw_type_comment */
/* identifies capabilities record */
__le32 magic;
/* capabilities (variable size), see enum wmi_fw_capability */
u8 capabilities[0];
};
/* perform action
* data_size = @head.size - offsetof(struct wil_fw_record_action, data)
*/
struct wil_fw_record_action { /* type == wil_fw_type_action */
__le32 action; /* action to perform: reset, wait for fw ready etc. */
__le32 data[0]; /* action specific, [data_size], see above */
} __packed;
/* data block for struct wil_fw_record_direct_write */
struct wil_fw_data_dwrite {
__le32 addr;
__le32 value;
__le32 mask;
} __packed;
/* write @value to the @addr,
* preserve original bits accordingly to the @mask
* data_size is @head.size where @head is record header
*/
struct wil_fw_record_direct_write { /* type == wil_fw_type_direct_write */
struct wil_fw_data_dwrite data[0];
} __packed;
/* verify condition: [@addr] & @mask == @value
* if condition not met, firmware download fails
*/
struct wil_fw_record_verify { /* type == wil_fw_verify */
__le32 addr; /* read from this address */
__le32 value; /* reference value */
__le32 mask; /* mask for verification */
} __packed;
/* file header
* First record of every file
*/
/* the FW version prefix in the comment */
#define WIL_FW_VERSION_PREFIX "FW version: "
#define WIL_FW_VERSION_PREFIX_LEN (sizeof(WIL_FW_VERSION_PREFIX) - 1)
struct wil_fw_record_file_header {
__le32 signature ; /* Wilocity signature */
__le32 reserved;
__le32 crc; /* crc32 of the following data */
__le32 version; /* format version */
__le32 data_len; /* total data in file, including this record */
u8 comment[32]; /* short description */
} __packed;
/* 1-dword gateway */
/* data block for the struct wil_fw_record_gateway_data */
struct wil_fw_data_gw {
__le32 addr;
__le32 value;
} __packed;
/* gateway write block.
* write starting address and values from the data buffer
* through the gateway
* data_size inferred from the @head.size. For this case,
* data_size = @head.size - offsetof(struct wil_fw_record_gateway_data, data)
*/
struct wil_fw_record_gateway_data { /* type == wil_fw_type_gateway_data */
__le32 gateway_addr_addr;
__le32 gateway_value_addr;
__le32 gateway_cmd_addr;
__le32 gateway_ctrl_address;
#define WIL_FW_GW_CTL_BUSY BIT(29) /* gateway busy performing operation */
#define WIL_FW_GW_CTL_RUN BIT(30) /* start gateway operation */
__le32 command;
struct wil_fw_data_gw data[0]; /* total size [data_size], see above */
} __packed;
/* 4-dword gateway */
/* data block for the struct wil_fw_record_gateway_data4 */
struct wil_fw_data_gw4 {
__le32 addr;
__le32 value[4];
} __packed;
/* gateway write block.
* write starting address and values from the data buffer
* through the gateway
* data_size inferred from the @head.size. For this case,
* data_size = @head.size - offsetof(struct wil_fw_record_gateway_data4, data)
*/
struct wil_fw_record_gateway_data4 { /* type == wil_fw_type_gateway_data4 */
__le32 gateway_addr_addr;
__le32 gateway_value_addr[4];
__le32 gateway_cmd_addr;
__le32 gateway_ctrl_address; /* same logic as for 1-dword gw */
__le32 command;
struct wil_fw_data_gw4 data[0]; /* total size [data_size], see above */
} __packed;