![Linus Torvalds](/assets/img/avatar_default.png)
New or improved SoC support: - Addition of support for Atmel's SAMA5D2 SoC - Addition of Freescale i.MX6UL - Improved support of TI's DM814x platform - Misc fixes and improvements for RockChip platforms - Marvell MVEBU suspend/resume support A few driver changes that ideally would belong in the drivers branch are also here (acked by appropriate maintainers): - Power key input driver for Freescale platforms (svns) - RTC driver updates for Freescale platforms (svns/mxc) - Clk fixes for TI DM814/816X + a bunch of other changes for various platforms -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJV5Mo6AAoJEIwa5zzehBx3VnMP/28LFJVUjIbd2xjJBo2gbSwV jN7uGlTkKU+1kHjZqnUPuirlBxBzsXKgRfBvCoeu0cPOggwmFcaF915/HHPz7xuz vTP7k98+Y5nSXScIohWkWCdZTpKKjve4sn74rXmiNakTUiuaHf5lKut/m7ldVrWd hN1o9W4LN+5O1mOYbc9ZD98v3bkDb6eu+a22oK7qemXiEiQi+NIMoDx+IR2bd4pA FeDaW7sOFWTEYU/p+M5nZNvI3n53P0/mlB5rPRiAYRjhQf9DrWHm5G7HdnMkUkgo /s8/QlVjBkJwhkY0TqpwtHY23JjSSB6UtCnXzb1eVAkX1nJN6PJQpcpCz1zJhd9q +sJ2k1zEvrfomJCK7/iZ1ubQE09KlJLEeb8xi5xCwD0MBOBAYC31bovDVAswCitV 8NHnfltEG+wCMyX955eqqGkVxkcw8sJMJUK5A95aK6w+vKqjd7gUgLJjXFC1u4eN ECuVVUf1hVmUEmM799CDayTlfGDt4oGLmHGao+SiSCVc1XbG9HkWr7Lcgr6u9UHr lNv3RIe6Axb85xxIU0/9hqLHrtB85uEQjjlbnQx3o7u8RsSOeaiZvCz4BzcjP9E1 VGyD6zkRWhuDiMFlPVXiAX0qIH5xSjIWkC0wPNJNy8eWFH9tkfGL0mOlLbl09oGR gtuvOrjbF/BhILkPw38y =8T5Z -----END PGP SIGNATURE----- Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Olof Johansson: "New or improved SoC support: - add support for Atmel's SAMA5D2 SoC - add support for Freescale i.MX6UL - improved support for TI's DM814x platform - misc fixes and improvements for RockChip platforms - Marvell MVEBU suspend/resume support A few driver changes that ideally would belong in the drivers branch are also here (acked by appropriate maintainers): - power key input driver for Freescale platforms (svns) - RTC driver updates for Freescale platforms (svns/mxc) - clk fixes for TI DM814/816X + a bunch of other changes for various platforms" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: rockchip: pm: Fix PTR_ERR() argument ARM: imx: mach-imx6ul: Fix allmodconfig build clk: ti: fix for definition movement ARM: uniphier: drop v7_invalidate_l1 call at secondary entry memory: kill off set_irq_flags usage rtc: snvs: select option REGMAP_MMIO ARM: brcmstb: select ARCH_DMA_ADDR_T_64BIT for LPAE ARM: BCM: Enable ARM erratum 798181 for BRCMSTB ARM: OMAP2+: Fix power domain operations regression caused by 81xx ARM: rockchip: enable PMU_GPIOINT_WAKEUP_EN when entering shallow suspend ARM: rockchip: set correct stabilization thresholds in suspend ARM: rockchip: rename osc_switch_to_32k variable ARM: imx6ul: add fec MAC refrence clock and phy fixup init ARM: imx6ul: add fec bits to GPR syscon definition rtc: mxc: add support of device tree dt-binding: document the binding for mxc rtc rtc: mxc: use a second rtc clock ARM: davinci: cp_intc: use IRQCHIP_SKIP_SET_WAKE instead of irq_set_wake callback soc: mediatek: Fix SCPSYS compilation ARM: at91/soc: add basic support for new sama5d2 SoC ...
3933 lines
111 KiB
C
3933 lines
111 KiB
C
/*
|
|
* omap_hwmod implementation for OMAP2/3/4
|
|
*
|
|
* Copyright (C) 2009-2011 Nokia Corporation
|
|
* Copyright (C) 2011-2012 Texas Instruments, Inc.
|
|
*
|
|
* Paul Walmsley, BenoƮt Cousson, Kevin Hilman
|
|
*
|
|
* Created in collaboration with (alphabetical order): Thara Gopinath,
|
|
* Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari Poussa, Anand
|
|
* Sawant, Santosh Shilimkar, Richard Woodruff
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Introduction
|
|
* ------------
|
|
* One way to view an OMAP SoC is as a collection of largely unrelated
|
|
* IP blocks connected by interconnects. The IP blocks include
|
|
* devices such as ARM processors, audio serial interfaces, UARTs,
|
|
* etc. Some of these devices, like the DSP, are created by TI;
|
|
* others, like the SGX, largely originate from external vendors. In
|
|
* TI's documentation, on-chip devices are referred to as "OMAP
|
|
* modules." Some of these IP blocks are identical across several
|
|
* OMAP versions. Others are revised frequently.
|
|
*
|
|
* These OMAP modules are tied together by various interconnects.
|
|
* Most of the address and data flow between modules is via OCP-based
|
|
* interconnects such as the L3 and L4 buses; but there are other
|
|
* interconnects that distribute the hardware clock tree, handle idle
|
|
* and reset signaling, supply power, and connect the modules to
|
|
* various pads or balls on the OMAP package.
|
|
*
|
|
* OMAP hwmod provides a consistent way to describe the on-chip
|
|
* hardware blocks and their integration into the rest of the chip.
|
|
* This description can be automatically generated from the TI
|
|
* hardware database. OMAP hwmod provides a standard, consistent API
|
|
* to reset, enable, idle, and disable these hardware blocks. And
|
|
* hwmod provides a way for other core code, such as the Linux device
|
|
* code or the OMAP power management and address space mapping code,
|
|
* to query the hardware database.
|
|
*
|
|
* Using hwmod
|
|
* -----------
|
|
* Drivers won't call hwmod functions directly. That is done by the
|
|
* omap_device code, and in rare occasions, by custom integration code
|
|
* in arch/arm/ *omap*. The omap_device code includes functions to
|
|
* build a struct platform_device using omap_hwmod data, and that is
|
|
* currently how hwmod data is communicated to drivers and to the
|
|
* Linux driver model. Most drivers will call omap_hwmod functions only
|
|
* indirectly, via pm_runtime*() functions.
|
|
*
|
|
* From a layering perspective, here is where the OMAP hwmod code
|
|
* fits into the kernel software stack:
|
|
*
|
|
* +-------------------------------+
|
|
* | Device driver code |
|
|
* | (e.g., drivers/) |
|
|
* +-------------------------------+
|
|
* | Linux driver model |
|
|
* | (platform_device / |
|
|
* | platform_driver data/code) |
|
|
* +-------------------------------+
|
|
* | OMAP core-driver integration |
|
|
* |(arch/arm/mach-omap2/devices.c)|
|
|
* +-------------------------------+
|
|
* | omap_device code |
|
|
* | (../plat-omap/omap_device.c) |
|
|
* +-------------------------------+
|
|
* ----> | omap_hwmod code/data | <-----
|
|
* | (../mach-omap2/omap_hwmod*) |
|
|
* +-------------------------------+
|
|
* | OMAP clock/PRCM/register fns |
|
|
* | ({read,write}l_relaxed, clk*) |
|
|
* +-------------------------------+
|
|
*
|
|
* Device drivers should not contain any OMAP-specific code or data in
|
|
* them. They should only contain code to operate the IP block that
|
|
* the driver is responsible for. This is because these IP blocks can
|
|
* also appear in other SoCs, either from TI (such as DaVinci) or from
|
|
* other manufacturers; and drivers should be reusable across other
|
|
* platforms.
|
|
*
|
|
* The OMAP hwmod code also will attempt to reset and idle all on-chip
|
|
* devices upon boot. The goal here is for the kernel to be
|
|
* completely self-reliant and independent from bootloaders. This is
|
|
* to ensure a repeatable configuration, both to ensure consistent
|
|
* runtime behavior, and to make it easier for others to reproduce
|
|
* bugs.
|
|
*
|
|
* OMAP module activity states
|
|
* ---------------------------
|
|
* The hwmod code considers modules to be in one of several activity
|
|
* states. IP blocks start out in an UNKNOWN state, then once they
|
|
* are registered via the hwmod code, proceed to the REGISTERED state.
|
|
* Once their clock names are resolved to clock pointers, the module
|
|
* enters the CLKS_INITED state; and finally, once the module has been
|
|
* reset and the integration registers programmed, the INITIALIZED state
|
|
* is entered. The hwmod code will then place the module into either
|
|
* the IDLE state to save power, or in the case of a critical system
|
|
* module, the ENABLED state.
|
|
*
|
|
* OMAP core integration code can then call omap_hwmod*() functions
|
|
* directly to move the module between the IDLE, ENABLED, and DISABLED
|
|
* states, as needed. This is done during both the PM idle loop, and
|
|
* in the OMAP core integration code's implementation of the PM runtime
|
|
* functions.
|
|
*
|
|
* References
|
|
* ----------
|
|
* This is a partial list.
|
|
* - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
|
|
* - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
|
|
* - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
|
|
* - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
|
|
* - Open Core Protocol Specification 2.2
|
|
*
|
|
* To do:
|
|
* - handle IO mapping
|
|
* - bus throughput & module latency measurement code
|
|
*
|
|
* XXX add tests at the beginning of each function to ensure the hwmod is
|
|
* in the appropriate state
|
|
* XXX error return values should be checked to ensure that they are
|
|
* appropriate
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/io.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/list.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/bootmem.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
|
|
#include <asm/system_misc.h>
|
|
|
|
#include "clock.h"
|
|
#include "omap_hwmod.h"
|
|
|
|
#include "soc.h"
|
|
#include "common.h"
|
|
#include "clockdomain.h"
|
|
#include "powerdomain.h"
|
|
#include "cm2xxx.h"
|
|
#include "cm3xxx.h"
|
|
#include "cm33xx.h"
|
|
#include "prm.h"
|
|
#include "prm3xxx.h"
|
|
#include "prm44xx.h"
|
|
#include "prm33xx.h"
|
|
#include "prminst44xx.h"
|
|
#include "mux.h"
|
|
#include "pm.h"
|
|
|
|
/* Name of the OMAP hwmod for the MPU */
|
|
#define MPU_INITIATOR_NAME "mpu"
|
|
|
|
/*
|
|
* Number of struct omap_hwmod_link records per struct
|
|
* omap_hwmod_ocp_if record (master->slave and slave->master)
|
|
*/
|
|
#define LINKS_PER_OCP_IF 2
|
|
|
|
/*
|
|
* Address offset (in bytes) between the reset control and the reset
|
|
* status registers: 4 bytes on OMAP4
|
|
*/
|
|
#define OMAP4_RST_CTRL_ST_OFFSET 4
|
|
|
|
/**
|
|
* struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations
|
|
* @enable_module: function to enable a module (via MODULEMODE)
|
|
* @disable_module: function to disable a module (via MODULEMODE)
|
|
*
|
|
* XXX Eventually this functionality will be hidden inside the PRM/CM
|
|
* device drivers. Until then, this should avoid huge blocks of cpu_is_*()
|
|
* conditionals in this code.
|
|
*/
|
|
struct omap_hwmod_soc_ops {
|
|
void (*enable_module)(struct omap_hwmod *oh);
|
|
int (*disable_module)(struct omap_hwmod *oh);
|
|
int (*wait_target_ready)(struct omap_hwmod *oh);
|
|
int (*assert_hardreset)(struct omap_hwmod *oh,
|
|
struct omap_hwmod_rst_info *ohri);
|
|
int (*deassert_hardreset)(struct omap_hwmod *oh,
|
|
struct omap_hwmod_rst_info *ohri);
|
|
int (*is_hardreset_asserted)(struct omap_hwmod *oh,
|
|
struct omap_hwmod_rst_info *ohri);
|
|
int (*init_clkdm)(struct omap_hwmod *oh);
|
|
void (*update_context_lost)(struct omap_hwmod *oh);
|
|
int (*get_context_lost)(struct omap_hwmod *oh);
|
|
};
|
|
|
|
/* soc_ops: adapts the omap_hwmod code to the currently-booted SoC */
|
|
static struct omap_hwmod_soc_ops soc_ops;
|
|
|
|
/* omap_hwmod_list contains all registered struct omap_hwmods */
|
|
static LIST_HEAD(omap_hwmod_list);
|
|
|
|
/* mpu_oh: used to add/remove MPU initiator from sleepdep list */
|
|
static struct omap_hwmod *mpu_oh;
|
|
|
|
/* io_chain_lock: used to serialize reconfigurations of the I/O chain */
|
|
static DEFINE_SPINLOCK(io_chain_lock);
|
|
|
|
/*
|
|
* linkspace: ptr to a buffer that struct omap_hwmod_link records are
|
|
* allocated from - used to reduce the number of small memory
|
|
* allocations, which has a significant impact on performance
|
|
*/
|
|
static struct omap_hwmod_link *linkspace;
|
|
|
|
/*
|
|
* free_ls, max_ls: array indexes into linkspace; representing the
|
|
* next free struct omap_hwmod_link index, and the maximum number of
|
|
* struct omap_hwmod_link records allocated (respectively)
|
|
*/
|
|
static unsigned short free_ls, max_ls, ls_supp;
|
|
|
|
/* inited: set to true once the hwmod code is initialized */
|
|
static bool inited;
|
|
|
|
/* Private functions */
|
|
|
|
/**
|
|
* _fetch_next_ocp_if - return the next OCP interface in a list
|
|
* @p: ptr to a ptr to the list_head inside the ocp_if to return
|
|
* @i: pointer to the index of the element pointed to by @p in the list
|
|
*
|
|
* Return a pointer to the struct omap_hwmod_ocp_if record
|
|
* containing the struct list_head pointed to by @p, and increment
|
|
* @p such that a future call to this routine will return the next
|
|
* record.
|
|
*/
|
|
static struct omap_hwmod_ocp_if *_fetch_next_ocp_if(struct list_head **p,
|
|
int *i)
|
|
{
|
|
struct omap_hwmod_ocp_if *oi;
|
|
|
|
oi = list_entry(*p, struct omap_hwmod_link, node)->ocp_if;
|
|
*p = (*p)->next;
|
|
|
|
*i = *i + 1;
|
|
|
|
return oi;
|
|
}
|
|
|
|
/**
|
|
* _update_sysc_cache - return the module OCP_SYSCONFIG register, keep copy
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Load the current value of the hwmod OCP_SYSCONFIG register into the
|
|
* struct omap_hwmod for later use. Returns -EINVAL if the hwmod has no
|
|
* OCP_SYSCONFIG register or 0 upon success.
|
|
*/
|
|
static int _update_sysc_cache(struct omap_hwmod *oh)
|
|
{
|
|
if (!oh->class->sysc) {
|
|
WARN(1, "omap_hwmod: %s: cannot read OCP_SYSCONFIG: not defined on hwmod's class\n", oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* XXX ensure module interface clock is up */
|
|
|
|
oh->_sysc_cache = omap_hwmod_read(oh, oh->class->sysc->sysc_offs);
|
|
|
|
if (!(oh->class->sysc->sysc_flags & SYSC_NO_CACHE))
|
|
oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _write_sysconfig - write a value to the module's OCP_SYSCONFIG register
|
|
* @v: OCP_SYSCONFIG value to write
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Write @v into the module class' OCP_SYSCONFIG register, if it has
|
|
* one. No return value.
|
|
*/
|
|
static void _write_sysconfig(u32 v, struct omap_hwmod *oh)
|
|
{
|
|
if (!oh->class->sysc) {
|
|
WARN(1, "omap_hwmod: %s: cannot write OCP_SYSCONFIG: not defined on hwmod's class\n", oh->name);
|
|
return;
|
|
}
|
|
|
|
/* XXX ensure module interface clock is up */
|
|
|
|
/* Module might have lost context, always update cache and register */
|
|
oh->_sysc_cache = v;
|
|
|
|
/*
|
|
* Some IP blocks (such as RTC) require unlocking of IP before
|
|
* accessing its registers. If a function pointer is present
|
|
* to unlock, then call it before accessing sysconfig and
|
|
* call lock after writing sysconfig.
|
|
*/
|
|
if (oh->class->unlock)
|
|
oh->class->unlock(oh);
|
|
|
|
omap_hwmod_write(v, oh, oh->class->sysc->sysc_offs);
|
|
|
|
if (oh->class->lock)
|
|
oh->class->lock(oh);
|
|
}
|
|
|
|
/**
|
|
* _set_master_standbymode: set the OCP_SYSCONFIG MIDLEMODE field in @v
|
|
* @oh: struct omap_hwmod *
|
|
* @standbymode: MIDLEMODE field bits
|
|
* @v: pointer to register contents to modify
|
|
*
|
|
* Update the master standby mode bits in @v to be @standbymode for
|
|
* the @oh hwmod. Does not write to the hardware. Returns -EINVAL
|
|
* upon error or 0 upon success.
|
|
*/
|
|
static int _set_master_standbymode(struct omap_hwmod *oh, u8 standbymode,
|
|
u32 *v)
|
|
{
|
|
u32 mstandby_mask;
|
|
u8 mstandby_shift;
|
|
|
|
if (!oh->class->sysc ||
|
|
!(oh->class->sysc->sysc_flags & SYSC_HAS_MIDLEMODE))
|
|
return -EINVAL;
|
|
|
|
if (!oh->class->sysc->sysc_fields) {
|
|
WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mstandby_shift = oh->class->sysc->sysc_fields->midle_shift;
|
|
mstandby_mask = (0x3 << mstandby_shift);
|
|
|
|
*v &= ~mstandby_mask;
|
|
*v |= __ffs(standbymode) << mstandby_shift;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _set_slave_idlemode: set the OCP_SYSCONFIG SIDLEMODE field in @v
|
|
* @oh: struct omap_hwmod *
|
|
* @idlemode: SIDLEMODE field bits
|
|
* @v: pointer to register contents to modify
|
|
*
|
|
* Update the slave idle mode bits in @v to be @idlemode for the @oh
|
|
* hwmod. Does not write to the hardware. Returns -EINVAL upon error
|
|
* or 0 upon success.
|
|
*/
|
|
static int _set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode, u32 *v)
|
|
{
|
|
u32 sidle_mask;
|
|
u8 sidle_shift;
|
|
|
|
if (!oh->class->sysc ||
|
|
!(oh->class->sysc->sysc_flags & SYSC_HAS_SIDLEMODE))
|
|
return -EINVAL;
|
|
|
|
if (!oh->class->sysc->sysc_fields) {
|
|
WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
sidle_shift = oh->class->sysc->sysc_fields->sidle_shift;
|
|
sidle_mask = (0x3 << sidle_shift);
|
|
|
|
*v &= ~sidle_mask;
|
|
*v |= __ffs(idlemode) << sidle_shift;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _set_clockactivity: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
|
|
* @oh: struct omap_hwmod *
|
|
* @clockact: CLOCKACTIVITY field bits
|
|
* @v: pointer to register contents to modify
|
|
*
|
|
* Update the clockactivity mode bits in @v to be @clockact for the
|
|
* @oh hwmod. Used for additional powersaving on some modules. Does
|
|
* not write to the hardware. Returns -EINVAL upon error or 0 upon
|
|
* success.
|
|
*/
|
|
static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v)
|
|
{
|
|
u32 clkact_mask;
|
|
u8 clkact_shift;
|
|
|
|
if (!oh->class->sysc ||
|
|
!(oh->class->sysc->sysc_flags & SYSC_HAS_CLOCKACTIVITY))
|
|
return -EINVAL;
|
|
|
|
if (!oh->class->sysc->sysc_fields) {
|
|
WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
clkact_shift = oh->class->sysc->sysc_fields->clkact_shift;
|
|
clkact_mask = (0x3 << clkact_shift);
|
|
|
|
*v &= ~clkact_mask;
|
|
*v |= clockact << clkact_shift;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _set_softreset: set OCP_SYSCONFIG.SOFTRESET bit in @v
|
|
* @oh: struct omap_hwmod *
|
|
* @v: pointer to register contents to modify
|
|
*
|
|
* Set the SOFTRESET bit in @v for hwmod @oh. Returns -EINVAL upon
|
|
* error or 0 upon success.
|
|
*/
|
|
static int _set_softreset(struct omap_hwmod *oh, u32 *v)
|
|
{
|
|
u32 softrst_mask;
|
|
|
|
if (!oh->class->sysc ||
|
|
!(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
|
|
return -EINVAL;
|
|
|
|
if (!oh->class->sysc->sysc_fields) {
|
|
WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
|
|
|
|
*v |= softrst_mask;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _clear_softreset: clear OCP_SYSCONFIG.SOFTRESET bit in @v
|
|
* @oh: struct omap_hwmod *
|
|
* @v: pointer to register contents to modify
|
|
*
|
|
* Clear the SOFTRESET bit in @v for hwmod @oh. Returns -EINVAL upon
|
|
* error or 0 upon success.
|
|
*/
|
|
static int _clear_softreset(struct omap_hwmod *oh, u32 *v)
|
|
{
|
|
u32 softrst_mask;
|
|
|
|
if (!oh->class->sysc ||
|
|
!(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
|
|
return -EINVAL;
|
|
|
|
if (!oh->class->sysc->sysc_fields) {
|
|
WARN(1,
|
|
"omap_hwmod: %s: sysc_fields absent for sysconfig class\n",
|
|
oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);
|
|
|
|
*v &= ~softrst_mask;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _wait_softreset_complete - wait for an OCP softreset to complete
|
|
* @oh: struct omap_hwmod * to wait on
|
|
*
|
|
* Wait until the IP block represented by @oh reports that its OCP
|
|
* softreset is complete. This can be triggered by software (see
|
|
* _ocp_softreset()) or by hardware upon returning from off-mode (one
|
|
* example is HSMMC). Waits for up to MAX_MODULE_SOFTRESET_WAIT
|
|
* microseconds. Returns the number of microseconds waited.
|
|
*/
|
|
static int _wait_softreset_complete(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_class_sysconfig *sysc;
|
|
u32 softrst_mask;
|
|
int c = 0;
|
|
|
|
sysc = oh->class->sysc;
|
|
|
|
if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
|
|
omap_test_timeout((omap_hwmod_read(oh, sysc->syss_offs)
|
|
& SYSS_RESETDONE_MASK),
|
|
MAX_MODULE_SOFTRESET_WAIT, c);
|
|
else if (sysc->sysc_flags & SYSC_HAS_RESET_STATUS) {
|
|
softrst_mask = (0x1 << sysc->sysc_fields->srst_shift);
|
|
omap_test_timeout(!(omap_hwmod_read(oh, sysc->sysc_offs)
|
|
& softrst_mask),
|
|
MAX_MODULE_SOFTRESET_WAIT, c);
|
|
}
|
|
|
|
return c;
|
|
}
|
|
|
|
/**
|
|
* _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* The DMADISABLE bit is a semi-automatic bit present in sysconfig register
|
|
* of some modules. When the DMA must perform read/write accesses, the
|
|
* DMADISABLE bit is cleared by the hardware. But when the DMA must stop
|
|
* for power management, software must set the DMADISABLE bit back to 1.
|
|
*
|
|
* Set the DMADISABLE bit in @v for hwmod @oh. Returns -EINVAL upon
|
|
* error or 0 upon success.
|
|
*/
|
|
static int _set_dmadisable(struct omap_hwmod *oh)
|
|
{
|
|
u32 v;
|
|
u32 dmadisable_mask;
|
|
|
|
if (!oh->class->sysc ||
|
|
!(oh->class->sysc->sysc_flags & SYSC_HAS_DMADISABLE))
|
|
return -EINVAL;
|
|
|
|
if (!oh->class->sysc->sysc_fields) {
|
|
WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* clocks must be on for this operation */
|
|
if (oh->_state != _HWMOD_STATE_ENABLED) {
|
|
pr_warn("omap_hwmod: %s: dma can be disabled only from enabled state\n", oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pr_debug("omap_hwmod: %s: setting DMADISABLE\n", oh->name);
|
|
|
|
v = oh->_sysc_cache;
|
|
dmadisable_mask =
|
|
(0x1 << oh->class->sysc->sysc_fields->dmadisable_shift);
|
|
v |= dmadisable_mask;
|
|
_write_sysconfig(v, oh);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v
|
|
* @oh: struct omap_hwmod *
|
|
* @autoidle: desired AUTOIDLE bitfield value (0 or 1)
|
|
* @v: pointer to register contents to modify
|
|
*
|
|
* Update the module autoidle bit in @v to be @autoidle for the @oh
|
|
* hwmod. The autoidle bit controls whether the module can gate
|
|
* internal clocks automatically when it isn't doing anything; the
|
|
* exact function of this bit varies on a per-module basis. This
|
|
* function does not write to the hardware. Returns -EINVAL upon
|
|
* error or 0 upon success.
|
|
*/
|
|
static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle,
|
|
u32 *v)
|
|
{
|
|
u32 autoidle_mask;
|
|
u8 autoidle_shift;
|
|
|
|
if (!oh->class->sysc ||
|
|
!(oh->class->sysc->sysc_flags & SYSC_HAS_AUTOIDLE))
|
|
return -EINVAL;
|
|
|
|
if (!oh->class->sysc->sysc_fields) {
|
|
WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
autoidle_shift = oh->class->sysc->sysc_fields->autoidle_shift;
|
|
autoidle_mask = (0x1 << autoidle_shift);
|
|
|
|
*v &= ~autoidle_mask;
|
|
*v |= autoidle << autoidle_shift;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _set_idle_ioring_wakeup - enable/disable IO pad wakeup on hwmod idle for mux
|
|
* @oh: struct omap_hwmod *
|
|
* @set_wake: bool value indicating to set (true) or clear (false) wakeup enable
|
|
*
|
|
* Set or clear the I/O pad wakeup flag in the mux entries for the
|
|
* hwmod @oh. This function changes the @oh->mux->pads_dynamic array
|
|
* in memory. If the hwmod is currently idled, and the new idle
|
|
* values don't match the previous ones, this function will also
|
|
* update the SCM PADCTRL registers. Otherwise, if the hwmod is not
|
|
* currently idled, this function won't touch the hardware: the new
|
|
* mux settings are written to the SCM PADCTRL registers when the
|
|
* hwmod is idled. No return value.
|
|
*/
|
|
static void _set_idle_ioring_wakeup(struct omap_hwmod *oh, bool set_wake)
|
|
{
|
|
struct omap_device_pad *pad;
|
|
bool change = false;
|
|
u16 prev_idle;
|
|
int j;
|
|
|
|
if (!oh->mux || !oh->mux->enabled)
|
|
return;
|
|
|
|
for (j = 0; j < oh->mux->nr_pads_dynamic; j++) {
|
|
pad = oh->mux->pads_dynamic[j];
|
|
|
|
if (!(pad->flags & OMAP_DEVICE_PAD_WAKEUP))
|
|
continue;
|
|
|
|
prev_idle = pad->idle;
|
|
|
|
if (set_wake)
|
|
pad->idle |= OMAP_WAKEUP_EN;
|
|
else
|
|
pad->idle &= ~OMAP_WAKEUP_EN;
|
|
|
|
if (prev_idle != pad->idle)
|
|
change = true;
|
|
}
|
|
|
|
if (change && oh->_state == _HWMOD_STATE_IDLE)
|
|
omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
|
|
}
|
|
|
|
/**
|
|
* _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Allow the hardware module @oh to send wakeups. Returns -EINVAL
|
|
* upon error or 0 upon success.
|
|
*/
|
|
static int _enable_wakeup(struct omap_hwmod *oh, u32 *v)
|
|
{
|
|
if (!oh->class->sysc ||
|
|
!((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) ||
|
|
(oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) ||
|
|
(oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)))
|
|
return -EINVAL;
|
|
|
|
if (!oh->class->sysc->sysc_fields) {
|
|
WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)
|
|
*v |= 0x1 << oh->class->sysc->sysc_fields->enwkup_shift;
|
|
|
|
if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
|
|
_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
|
|
if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
|
|
_set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
|
|
|
|
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _disable_wakeup: clear OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Prevent the hardware module @oh to send wakeups. Returns -EINVAL
|
|
* upon error or 0 upon success.
|
|
*/
|
|
static int _disable_wakeup(struct omap_hwmod *oh, u32 *v)
|
|
{
|
|
if (!oh->class->sysc ||
|
|
!((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) ||
|
|
(oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) ||
|
|
(oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)))
|
|
return -EINVAL;
|
|
|
|
if (!oh->class->sysc->sysc_fields) {
|
|
WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)
|
|
*v &= ~(0x1 << oh->class->sysc->sysc_fields->enwkup_shift);
|
|
|
|
if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
|
|
_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v);
|
|
if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
|
|
_set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v);
|
|
|
|
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct clockdomain *_get_clkdm(struct omap_hwmod *oh)
|
|
{
|
|
struct clk_hw_omap *clk;
|
|
|
|
if (oh->clkdm) {
|
|
return oh->clkdm;
|
|
} else if (oh->_clk) {
|
|
if (__clk_get_flags(oh->_clk) & CLK_IS_BASIC)
|
|
return NULL;
|
|
clk = to_clk_hw_omap(__clk_get_hw(oh->_clk));
|
|
return clk->clkdm;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* _add_initiator_dep: prevent @oh from smart-idling while @init_oh is active
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Prevent the hardware module @oh from entering idle while the
|
|
* hardare module initiator @init_oh is active. Useful when a module
|
|
* will be accessed by a particular initiator (e.g., if a module will
|
|
* be accessed by the IVA, there should be a sleepdep between the IVA
|
|
* initiator and the module). Only applies to modules in smart-idle
|
|
* mode. If the clockdomain is marked as not needing autodeps, return
|
|
* 0 without doing anything. Otherwise, returns -EINVAL upon error or
|
|
* passes along clkdm_add_sleepdep() value upon success.
|
|
*/
|
|
static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
|
|
{
|
|
struct clockdomain *clkdm, *init_clkdm;
|
|
|
|
clkdm = _get_clkdm(oh);
|
|
init_clkdm = _get_clkdm(init_oh);
|
|
|
|
if (!clkdm || !init_clkdm)
|
|
return -EINVAL;
|
|
|
|
if (clkdm && clkdm->flags & CLKDM_NO_AUTODEPS)
|
|
return 0;
|
|
|
|
return clkdm_add_sleepdep(clkdm, init_clkdm);
|
|
}
|
|
|
|
/**
|
|
* _del_initiator_dep: allow @oh to smart-idle even if @init_oh is active
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Allow the hardware module @oh to enter idle while the hardare
|
|
* module initiator @init_oh is active. Useful when a module will not
|
|
* be accessed by a particular initiator (e.g., if a module will not
|
|
* be accessed by the IVA, there should be no sleepdep between the IVA
|
|
* initiator and the module). Only applies to modules in smart-idle
|
|
* mode. If the clockdomain is marked as not needing autodeps, return
|
|
* 0 without doing anything. Returns -EINVAL upon error or passes
|
|
* along clkdm_del_sleepdep() value upon success.
|
|
*/
|
|
static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
|
|
{
|
|
struct clockdomain *clkdm, *init_clkdm;
|
|
|
|
clkdm = _get_clkdm(oh);
|
|
init_clkdm = _get_clkdm(init_oh);
|
|
|
|
if (!clkdm || !init_clkdm)
|
|
return -EINVAL;
|
|
|
|
if (clkdm && clkdm->flags & CLKDM_NO_AUTODEPS)
|
|
return 0;
|
|
|
|
return clkdm_del_sleepdep(clkdm, init_clkdm);
|
|
}
|
|
|
|
/**
|
|
* _init_main_clk - get a struct clk * for the the hwmod's main functional clk
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Called from _init_clocks(). Populates the @oh _clk (main
|
|
* functional clock pointer) if a main_clk is present. Returns 0 on
|
|
* success or -EINVAL on error.
|
|
*/
|
|
static int _init_main_clk(struct omap_hwmod *oh)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (!oh->main_clk)
|
|
return 0;
|
|
|
|
oh->_clk = clk_get(NULL, oh->main_clk);
|
|
if (IS_ERR(oh->_clk)) {
|
|
pr_warn("omap_hwmod: %s: cannot clk_get main_clk %s\n",
|
|
oh->name, oh->main_clk);
|
|
return -EINVAL;
|
|
}
|
|
/*
|
|
* HACK: This needs a re-visit once clk_prepare() is implemented
|
|
* to do something meaningful. Today its just a no-op.
|
|
* If clk_prepare() is used at some point to do things like
|
|
* voltage scaling etc, then this would have to be moved to
|
|
* some point where subsystems like i2c and pmic become
|
|
* available.
|
|
*/
|
|
clk_prepare(oh->_clk);
|
|
|
|
if (!_get_clkdm(oh))
|
|
pr_debug("omap_hwmod: %s: missing clockdomain for %s.\n",
|
|
oh->name, oh->main_clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* _init_interface_clks - get a struct clk * for the the hwmod's interface clks
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Called from _init_clocks(). Populates the @oh OCP slave interface
|
|
* clock pointers. Returns 0 on success or -EINVAL on error.
|
|
*/
|
|
static int _init_interface_clks(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_ocp_if *os;
|
|
struct list_head *p;
|
|
struct clk *c;
|
|
int i = 0;
|
|
int ret = 0;
|
|
|
|
p = oh->slave_ports.next;
|
|
|
|
while (i < oh->slaves_cnt) {
|
|
os = _fetch_next_ocp_if(&p, &i);
|
|
if (!os->clk)
|
|
continue;
|
|
|
|
c = clk_get(NULL, os->clk);
|
|
if (IS_ERR(c)) {
|
|
pr_warn("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
|
|
oh->name, os->clk);
|
|
ret = -EINVAL;
|
|
continue;
|
|
}
|
|
os->_clk = c;
|
|
/*
|
|
* HACK: This needs a re-visit once clk_prepare() is implemented
|
|
* to do something meaningful. Today its just a no-op.
|
|
* If clk_prepare() is used at some point to do things like
|
|
* voltage scaling etc, then this would have to be moved to
|
|
* some point where subsystems like i2c and pmic become
|
|
* available.
|
|
*/
|
|
clk_prepare(os->_clk);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* _init_opt_clk - get a struct clk * for the the hwmod's optional clocks
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk
|
|
* clock pointers. Returns 0 on success or -EINVAL on error.
|
|
*/
|
|
static int _init_opt_clks(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_opt_clk *oc;
|
|
struct clk *c;
|
|
int i;
|
|
int ret = 0;
|
|
|
|
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
|
|
c = clk_get(NULL, oc->clk);
|
|
if (IS_ERR(c)) {
|
|
pr_warn("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
|
|
oh->name, oc->clk);
|
|
ret = -EINVAL;
|
|
continue;
|
|
}
|
|
oc->_clk = c;
|
|
/*
|
|
* HACK: This needs a re-visit once clk_prepare() is implemented
|
|
* to do something meaningful. Today its just a no-op.
|
|
* If clk_prepare() is used at some point to do things like
|
|
* voltage scaling etc, then this would have to be moved to
|
|
* some point where subsystems like i2c and pmic become
|
|
* available.
|
|
*/
|
|
clk_prepare(oc->_clk);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* _enable_clocks - enable hwmod main clock and interface clocks
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Enables all clocks necessary for register reads and writes to succeed
|
|
* on the hwmod @oh. Returns 0.
|
|
*/
|
|
static int _enable_clocks(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_ocp_if *os;
|
|
struct list_head *p;
|
|
int i = 0;
|
|
|
|
pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);
|
|
|
|
if (oh->_clk)
|
|
clk_enable(oh->_clk);
|
|
|
|
p = oh->slave_ports.next;
|
|
|
|
while (i < oh->slaves_cnt) {
|
|
os = _fetch_next_ocp_if(&p, &i);
|
|
|
|
if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE))
|
|
clk_enable(os->_clk);
|
|
}
|
|
|
|
/* The opt clocks are controlled by the device driver. */
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _disable_clocks - disable hwmod main clock and interface clocks
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Disables the hwmod @oh main functional and interface clocks. Returns 0.
|
|
*/
|
|
static int _disable_clocks(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_ocp_if *os;
|
|
struct list_head *p;
|
|
int i = 0;
|
|
|
|
pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name);
|
|
|
|
if (oh->_clk)
|
|
clk_disable(oh->_clk);
|
|
|
|
p = oh->slave_ports.next;
|
|
|
|
while (i < oh->slaves_cnt) {
|
|
os = _fetch_next_ocp_if(&p, &i);
|
|
|
|
if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE))
|
|
clk_disable(os->_clk);
|
|
}
|
|
|
|
/* The opt clocks are controlled by the device driver. */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void _enable_optional_clocks(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_opt_clk *oc;
|
|
int i;
|
|
|
|
pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name);
|
|
|
|
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
|
|
if (oc->_clk) {
|
|
pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
|
|
__clk_get_name(oc->_clk));
|
|
clk_enable(oc->_clk);
|
|
}
|
|
}
|
|
|
|
static void _disable_optional_clocks(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_opt_clk *oc;
|
|
int i;
|
|
|
|
pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name);
|
|
|
|
for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
|
|
if (oc->_clk) {
|
|
pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
|
|
__clk_get_name(oc->_clk));
|
|
clk_disable(oc->_clk);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* _omap4_enable_module - enable CLKCTRL modulemode on OMAP4
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Enables the PRCM module mode related to the hwmod @oh.
|
|
* No return value.
|
|
*/
|
|
static void _omap4_enable_module(struct omap_hwmod *oh)
|
|
{
|
|
if (!oh->clkdm || !oh->prcm.omap4.modulemode)
|
|
return;
|
|
|
|
pr_debug("omap_hwmod: %s: %s: %d\n",
|
|
oh->name, __func__, oh->prcm.omap4.modulemode);
|
|
|
|
omap_cm_module_enable(oh->prcm.omap4.modulemode,
|
|
oh->clkdm->prcm_partition,
|
|
oh->clkdm->cm_inst, oh->prcm.omap4.clkctrl_offs);
|
|
}
|
|
|
|
/**
|
|
* _omap4_wait_target_disable - wait for a module to be disabled on OMAP4
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Wait for a module @oh to enter slave idle. Returns 0 if the module
|
|
* does not have an IDLEST bit or if the module successfully enters
|
|
* slave idle; otherwise, pass along the return value of the
|
|
* appropriate *_cm*_wait_module_idle() function.
|
|
*/
|
|
static int _omap4_wait_target_disable(struct omap_hwmod *oh)
|
|
{
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
if (oh->_int_flags & _HWMOD_NO_MPU_PORT || !oh->clkdm)
|
|
return 0;
|
|
|
|
if (oh->flags & HWMOD_NO_IDLEST)
|
|
return 0;
|
|
|
|
return omap_cm_wait_module_idle(oh->clkdm->prcm_partition,
|
|
oh->clkdm->cm_inst,
|
|
oh->prcm.omap4.clkctrl_offs, 0);
|
|
}
|
|
|
|
/**
|
|
* _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh
|
|
* @oh: struct omap_hwmod *oh
|
|
*
|
|
* Count and return the number of MPU IRQs associated with the hwmod
|
|
* @oh. Used to allocate struct resource data. Returns 0 if @oh is
|
|
* NULL.
|
|
*/
|
|
static int _count_mpu_irqs(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_irq_info *ohii;
|
|
int i = 0;
|
|
|
|
if (!oh || !oh->mpu_irqs)
|
|
return 0;
|
|
|
|
do {
|
|
ohii = &oh->mpu_irqs[i++];
|
|
} while (ohii->irq != -1);
|
|
|
|
return i-1;
|
|
}
|
|
|
|
/**
|
|
* _count_sdma_reqs - count the number of SDMA request lines associated with @oh
|
|
* @oh: struct omap_hwmod *oh
|
|
*
|
|
* Count and return the number of SDMA request lines associated with
|
|
* the hwmod @oh. Used to allocate struct resource data. Returns 0
|
|
* if @oh is NULL.
|
|
*/
|
|
static int _count_sdma_reqs(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_dma_info *ohdi;
|
|
int i = 0;
|
|
|
|
if (!oh || !oh->sdma_reqs)
|
|
return 0;
|
|
|
|
do {
|
|
ohdi = &oh->sdma_reqs[i++];
|
|
} while (ohdi->dma_req != -1);
|
|
|
|
return i-1;
|
|
}
|
|
|
|
/**
|
|
* _count_ocp_if_addr_spaces - count the number of address space entries for @oh
|
|
* @oh: struct omap_hwmod *oh
|
|
*
|
|
* Count and return the number of address space ranges associated with
|
|
* the hwmod @oh. Used to allocate struct resource data. Returns 0
|
|
* if @oh is NULL.
|
|
*/
|
|
static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os)
|
|
{
|
|
struct omap_hwmod_addr_space *mem;
|
|
int i = 0;
|
|
|
|
if (!os || !os->addr)
|
|
return 0;
|
|
|
|
do {
|
|
mem = &os->addr[i++];
|
|
} while (mem->pa_start != mem->pa_end);
|
|
|
|
return i-1;
|
|
}
|
|
|
|
/**
|
|
* _get_mpu_irq_by_name - fetch MPU interrupt line number by name
|
|
* @oh: struct omap_hwmod * to operate on
|
|
* @name: pointer to the name of the MPU interrupt number to fetch (optional)
|
|
* @irq: pointer to an unsigned int to store the MPU IRQ number to
|
|
*
|
|
* Retrieve a MPU hardware IRQ line number named by @name associated
|
|
* with the IP block pointed to by @oh. The IRQ number will be filled
|
|
* into the address pointed to by @dma. When @name is non-null, the
|
|
* IRQ line number associated with the named entry will be returned.
|
|
* If @name is null, the first matching entry will be returned. Data
|
|
* order is not meaningful in hwmod data, so callers are strongly
|
|
* encouraged to use a non-null @name whenever possible to avoid
|
|
* unpredictable effects if hwmod data is later added that causes data
|
|
* ordering to change. Returns 0 upon success or a negative error
|
|
* code upon error.
|
|
*/
|
|
static int _get_mpu_irq_by_name(struct omap_hwmod *oh, const char *name,
|
|
unsigned int *irq)
|
|
{
|
|
int i;
|
|
bool found = false;
|
|
|
|
if (!oh->mpu_irqs)
|
|
return -ENOENT;
|
|
|
|
i = 0;
|
|
while (oh->mpu_irqs[i].irq != -1) {
|
|
if (name == oh->mpu_irqs[i].name ||
|
|
!strcmp(name, oh->mpu_irqs[i].name)) {
|
|
found = true;
|
|
break;
|
|
}
|
|
i++;
|
|
}
|
|
|
|
if (!found)
|
|
return -ENOENT;
|
|
|
|
*irq = oh->mpu_irqs[i].irq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _get_sdma_req_by_name - fetch SDMA request line ID by name
|
|
* @oh: struct omap_hwmod * to operate on
|
|
* @name: pointer to the name of the SDMA request line to fetch (optional)
|
|
* @dma: pointer to an unsigned int to store the request line ID to
|
|
*
|
|
* Retrieve an SDMA request line ID named by @name on the IP block
|
|
* pointed to by @oh. The ID will be filled into the address pointed
|
|
* to by @dma. When @name is non-null, the request line ID associated
|
|
* with the named entry will be returned. If @name is null, the first
|
|
* matching entry will be returned. Data order is not meaningful in
|
|
* hwmod data, so callers are strongly encouraged to use a non-null
|
|
* @name whenever possible to avoid unpredictable effects if hwmod
|
|
* data is later added that causes data ordering to change. Returns 0
|
|
* upon success or a negative error code upon error.
|
|
*/
|
|
static int _get_sdma_req_by_name(struct omap_hwmod *oh, const char *name,
|
|
unsigned int *dma)
|
|
{
|
|
int i;
|
|
bool found = false;
|
|
|
|
if (!oh->sdma_reqs)
|
|
return -ENOENT;
|
|
|
|
i = 0;
|
|
while (oh->sdma_reqs[i].dma_req != -1) {
|
|
if (name == oh->sdma_reqs[i].name ||
|
|
!strcmp(name, oh->sdma_reqs[i].name)) {
|
|
found = true;
|
|
break;
|
|
}
|
|
i++;
|
|
}
|
|
|
|
if (!found)
|
|
return -ENOENT;
|
|
|
|
*dma = oh->sdma_reqs[i].dma_req;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _get_addr_space_by_name - fetch address space start & end by name
|
|
* @oh: struct omap_hwmod * to operate on
|
|
* @name: pointer to the name of the address space to fetch (optional)
|
|
* @pa_start: pointer to a u32 to store the starting address to
|
|
* @pa_end: pointer to a u32 to store the ending address to
|
|
*
|
|
* Retrieve address space start and end addresses for the IP block
|
|
* pointed to by @oh. The data will be filled into the addresses
|
|
* pointed to by @pa_start and @pa_end. When @name is non-null, the
|
|
* address space data associated with the named entry will be
|
|
* returned. If @name is null, the first matching entry will be
|
|
* returned. Data order is not meaningful in hwmod data, so callers
|
|
* are strongly encouraged to use a non-null @name whenever possible
|
|
* to avoid unpredictable effects if hwmod data is later added that
|
|
* causes data ordering to change. Returns 0 upon success or a
|
|
* negative error code upon error.
|
|
*/
|
|
static int _get_addr_space_by_name(struct omap_hwmod *oh, const char *name,
|
|
u32 *pa_start, u32 *pa_end)
|
|
{
|
|
int i, j;
|
|
struct omap_hwmod_ocp_if *os;
|
|
struct list_head *p = NULL;
|
|
bool found = false;
|
|
|
|
p = oh->slave_ports.next;
|
|
|
|
i = 0;
|
|
while (i < oh->slaves_cnt) {
|
|
os = _fetch_next_ocp_if(&p, &i);
|
|
|
|
if (!os->addr)
|
|
return -ENOENT;
|
|
|
|
j = 0;
|
|
while (os->addr[j].pa_start != os->addr[j].pa_end) {
|
|
if (name == os->addr[j].name ||
|
|
!strcmp(name, os->addr[j].name)) {
|
|
found = true;
|
|
break;
|
|
}
|
|
j++;
|
|
}
|
|
|
|
if (found)
|
|
break;
|
|
}
|
|
|
|
if (!found)
|
|
return -ENOENT;
|
|
|
|
*pa_start = os->addr[j].pa_start;
|
|
*pa_end = os->addr[j].pa_end;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _save_mpu_port_index - find and save the index to @oh's MPU port
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Determines the array index of the OCP slave port that the MPU uses
|
|
* to address the device, and saves it into the struct omap_hwmod.
|
|
* Intended to be called during hwmod registration only. No return
|
|
* value.
|
|
*/
|
|
static void __init _save_mpu_port_index(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_ocp_if *os = NULL;
|
|
struct list_head *p;
|
|
int i = 0;
|
|
|
|
if (!oh)
|
|
return;
|
|
|
|
oh->_int_flags |= _HWMOD_NO_MPU_PORT;
|
|
|
|
p = oh->slave_ports.next;
|
|
|
|
while (i < oh->slaves_cnt) {
|
|
os = _fetch_next_ocp_if(&p, &i);
|
|
if (os->user & OCP_USER_MPU) {
|
|
oh->_mpu_port = os;
|
|
oh->_int_flags &= ~_HWMOD_NO_MPU_PORT;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* _find_mpu_rt_port - return omap_hwmod_ocp_if accessible by the MPU
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Given a pointer to a struct omap_hwmod record @oh, return a pointer
|
|
* to the struct omap_hwmod_ocp_if record that is used by the MPU to
|
|
* communicate with the IP block. This interface need not be directly
|
|
* connected to the MPU (and almost certainly is not), but is directly
|
|
* connected to the IP block represented by @oh. Returns a pointer
|
|
* to the struct omap_hwmod_ocp_if * upon success, or returns NULL upon
|
|
* error or if there does not appear to be a path from the MPU to this
|
|
* IP block.
|
|
*/
|
|
static struct omap_hwmod_ocp_if *_find_mpu_rt_port(struct omap_hwmod *oh)
|
|
{
|
|
if (!oh || oh->_int_flags & _HWMOD_NO_MPU_PORT || oh->slaves_cnt == 0)
|
|
return NULL;
|
|
|
|
return oh->_mpu_port;
|
|
};
|
|
|
|
/**
|
|
* _find_mpu_rt_addr_space - return MPU register target address space for @oh
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Returns a pointer to the struct omap_hwmod_addr_space record representing
|
|
* the register target MPU address space; or returns NULL upon error.
|
|
*/
|
|
static struct omap_hwmod_addr_space * __init _find_mpu_rt_addr_space(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_ocp_if *os;
|
|
struct omap_hwmod_addr_space *mem;
|
|
int found = 0, i = 0;
|
|
|
|
os = _find_mpu_rt_port(oh);
|
|
if (!os || !os->addr)
|
|
return NULL;
|
|
|
|
do {
|
|
mem = &os->addr[i++];
|
|
if (mem->flags & ADDR_TYPE_RT)
|
|
found = 1;
|
|
} while (!found && mem->pa_start != mem->pa_end);
|
|
|
|
return (found) ? mem : NULL;
|
|
}
|
|
|
|
/**
|
|
* _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Ensure that the OCP_SYSCONFIG register for the IP block represented
|
|
* by @oh is set to indicate to the PRCM that the IP block is active.
|
|
* Usually this means placing the module into smart-idle mode and
|
|
* smart-standby, but if there is a bug in the automatic idle handling
|
|
* for the IP block, it may need to be placed into the force-idle or
|
|
* no-idle variants of these modes. No return value.
|
|
*/
|
|
static void _enable_sysc(struct omap_hwmod *oh)
|
|
{
|
|
u8 idlemode, sf;
|
|
u32 v;
|
|
bool clkdm_act;
|
|
struct clockdomain *clkdm;
|
|
|
|
if (!oh->class->sysc)
|
|
return;
|
|
|
|
/*
|
|
* Wait until reset has completed, this is needed as the IP
|
|
* block is reset automatically by hardware in some cases
|
|
* (off-mode for example), and the drivers require the
|
|
* IP to be ready when they access it
|
|
*/
|
|
if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
|
|
_enable_optional_clocks(oh);
|
|
_wait_softreset_complete(oh);
|
|
if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
|
|
_disable_optional_clocks(oh);
|
|
|
|
v = oh->_sysc_cache;
|
|
sf = oh->class->sysc->sysc_flags;
|
|
|
|
clkdm = _get_clkdm(oh);
|
|
if (sf & SYSC_HAS_SIDLEMODE) {
|
|
if (oh->flags & HWMOD_SWSUP_SIDLE ||
|
|
oh->flags & HWMOD_SWSUP_SIDLE_ACT) {
|
|
idlemode = HWMOD_IDLEMODE_NO;
|
|
} else {
|
|
if (sf & SYSC_HAS_ENAWAKEUP)
|
|
_enable_wakeup(oh, &v);
|
|
if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
|
|
idlemode = HWMOD_IDLEMODE_SMART_WKUP;
|
|
else
|
|
idlemode = HWMOD_IDLEMODE_SMART;
|
|
}
|
|
|
|
/*
|
|
* This is special handling for some IPs like
|
|
* 32k sync timer. Force them to idle!
|
|
*/
|
|
clkdm_act = (clkdm && clkdm->flags & CLKDM_ACTIVE_WITH_MPU);
|
|
if (clkdm_act && !(oh->class->sysc->idlemodes &
|
|
(SIDLE_SMART | SIDLE_SMART_WKUP)))
|
|
idlemode = HWMOD_IDLEMODE_FORCE;
|
|
|
|
_set_slave_idlemode(oh, idlemode, &v);
|
|
}
|
|
|
|
if (sf & SYSC_HAS_MIDLEMODE) {
|
|
if (oh->flags & HWMOD_FORCE_MSTANDBY) {
|
|
idlemode = HWMOD_IDLEMODE_FORCE;
|
|
} else if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
|
|
idlemode = HWMOD_IDLEMODE_NO;
|
|
} else {
|
|
if (sf & SYSC_HAS_ENAWAKEUP)
|
|
_enable_wakeup(oh, &v);
|
|
if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
|
|
idlemode = HWMOD_IDLEMODE_SMART_WKUP;
|
|
else
|
|
idlemode = HWMOD_IDLEMODE_SMART;
|
|
}
|
|
_set_master_standbymode(oh, idlemode, &v);
|
|
}
|
|
|
|
/*
|
|
* XXX The clock framework should handle this, by
|
|
* calling into this code. But this must wait until the
|
|
* clock structures are tagged with omap_hwmod entries
|
|
*/
|
|
if ((oh->flags & HWMOD_SET_DEFAULT_CLOCKACT) &&
|
|
(sf & SYSC_HAS_CLOCKACTIVITY))
|
|
_set_clockactivity(oh, oh->class->sysc->clockact, &v);
|
|
|
|
/* If the cached value is the same as the new value, skip the write */
|
|
if (oh->_sysc_cache != v)
|
|
_write_sysconfig(v, oh);
|
|
|
|
/*
|
|
* Set the autoidle bit only after setting the smartidle bit
|
|
* Setting this will not have any impact on the other modules.
|
|
*/
|
|
if (sf & SYSC_HAS_AUTOIDLE) {
|
|
idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ?
|
|
0 : 1;
|
|
_set_module_autoidle(oh, idlemode, &v);
|
|
_write_sysconfig(v, oh);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* _idle_sysc - try to put a module into idle via OCP_SYSCONFIG
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* If module is marked as SWSUP_SIDLE, force the module into slave
|
|
* idle; otherwise, configure it for smart-idle. If module is marked
|
|
* as SWSUP_MSUSPEND, force the module into master standby; otherwise,
|
|
* configure it for smart-standby. No return value.
|
|
*/
|
|
static void _idle_sysc(struct omap_hwmod *oh)
|
|
{
|
|
u8 idlemode, sf;
|
|
u32 v;
|
|
|
|
if (!oh->class->sysc)
|
|
return;
|
|
|
|
v = oh->_sysc_cache;
|
|
sf = oh->class->sysc->sysc_flags;
|
|
|
|
if (sf & SYSC_HAS_SIDLEMODE) {
|
|
if (oh->flags & HWMOD_SWSUP_SIDLE) {
|
|
idlemode = HWMOD_IDLEMODE_FORCE;
|
|
} else {
|
|
if (sf & SYSC_HAS_ENAWAKEUP)
|
|
_enable_wakeup(oh, &v);
|
|
if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
|
|
idlemode = HWMOD_IDLEMODE_SMART_WKUP;
|
|
else
|
|
idlemode = HWMOD_IDLEMODE_SMART;
|
|
}
|
|
_set_slave_idlemode(oh, idlemode, &v);
|
|
}
|
|
|
|
if (sf & SYSC_HAS_MIDLEMODE) {
|
|
if ((oh->flags & HWMOD_SWSUP_MSTANDBY) ||
|
|
(oh->flags & HWMOD_FORCE_MSTANDBY)) {
|
|
idlemode = HWMOD_IDLEMODE_FORCE;
|
|
} else {
|
|
if (sf & SYSC_HAS_ENAWAKEUP)
|
|
_enable_wakeup(oh, &v);
|
|
if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
|
|
idlemode = HWMOD_IDLEMODE_SMART_WKUP;
|
|
else
|
|
idlemode = HWMOD_IDLEMODE_SMART;
|
|
}
|
|
_set_master_standbymode(oh, idlemode, &v);
|
|
}
|
|
|
|
_write_sysconfig(v, oh);
|
|
}
|
|
|
|
/**
|
|
* _shutdown_sysc - force a module into idle via OCP_SYSCONFIG
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Force the module into slave idle and master suspend. No return
|
|
* value.
|
|
*/
|
|
static void _shutdown_sysc(struct omap_hwmod *oh)
|
|
{
|
|
u32 v;
|
|
u8 sf;
|
|
|
|
if (!oh->class->sysc)
|
|
return;
|
|
|
|
v = oh->_sysc_cache;
|
|
sf = oh->class->sysc->sysc_flags;
|
|
|
|
if (sf & SYSC_HAS_SIDLEMODE)
|
|
_set_slave_idlemode(oh, HWMOD_IDLEMODE_FORCE, &v);
|
|
|
|
if (sf & SYSC_HAS_MIDLEMODE)
|
|
_set_master_standbymode(oh, HWMOD_IDLEMODE_FORCE, &v);
|
|
|
|
if (sf & SYSC_HAS_AUTOIDLE)
|
|
_set_module_autoidle(oh, 1, &v);
|
|
|
|
_write_sysconfig(v, oh);
|
|
}
|
|
|
|
/**
|
|
* _lookup - find an omap_hwmod by name
|
|
* @name: find an omap_hwmod by name
|
|
*
|
|
* Return a pointer to an omap_hwmod by name, or NULL if not found.
|
|
*/
|
|
static struct omap_hwmod *_lookup(const char *name)
|
|
{
|
|
struct omap_hwmod *oh, *temp_oh;
|
|
|
|
oh = NULL;
|
|
|
|
list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
|
|
if (!strcmp(name, temp_oh->name)) {
|
|
oh = temp_oh;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return oh;
|
|
}
|
|
|
|
/**
|
|
* _init_clkdm - look up a clockdomain name, store pointer in omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Convert a clockdomain name stored in a struct omap_hwmod into a
|
|
* clockdomain pointer, and save it into the struct omap_hwmod.
|
|
* Return -EINVAL if the clkdm_name lookup failed.
|
|
*/
|
|
static int _init_clkdm(struct omap_hwmod *oh)
|
|
{
|
|
if (!oh->clkdm_name) {
|
|
pr_debug("omap_hwmod: %s: missing clockdomain\n", oh->name);
|
|
return 0;
|
|
}
|
|
|
|
oh->clkdm = clkdm_lookup(oh->clkdm_name);
|
|
if (!oh->clkdm) {
|
|
pr_warn("omap_hwmod: %s: could not associate to clkdm %s\n",
|
|
oh->name, oh->clkdm_name);
|
|
return 0;
|
|
}
|
|
|
|
pr_debug("omap_hwmod: %s: associated to clkdm %s\n",
|
|
oh->name, oh->clkdm_name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _init_clocks - clk_get() all clocks associated with this hwmod. Retrieve as
|
|
* well the clockdomain.
|
|
* @oh: struct omap_hwmod *
|
|
* @data: not used; pass NULL
|
|
*
|
|
* Called by omap_hwmod_setup_*() (after omap2_clk_init()).
|
|
* Resolves all clock names embedded in the hwmod. Returns 0 on
|
|
* success, or a negative error code on failure.
|
|
*/
|
|
static int _init_clocks(struct omap_hwmod *oh, void *data)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (oh->_state != _HWMOD_STATE_REGISTERED)
|
|
return 0;
|
|
|
|
pr_debug("omap_hwmod: %s: looking up clocks\n", oh->name);
|
|
|
|
if (soc_ops.init_clkdm)
|
|
ret |= soc_ops.init_clkdm(oh);
|
|
|
|
ret |= _init_main_clk(oh);
|
|
ret |= _init_interface_clks(oh);
|
|
ret |= _init_opt_clks(oh);
|
|
|
|
if (!ret)
|
|
oh->_state = _HWMOD_STATE_CLKS_INITED;
|
|
else
|
|
pr_warn("omap_hwmod: %s: cannot _init_clocks\n", oh->name);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* _lookup_hardreset - fill register bit info for this hwmod/reset line
|
|
* @oh: struct omap_hwmod *
|
|
* @name: name of the reset line in the context of this hwmod
|
|
* @ohri: struct omap_hwmod_rst_info * that this function will fill in
|
|
*
|
|
* Return the bit position of the reset line that match the
|
|
* input name. Return -ENOENT if not found.
|
|
*/
|
|
static int _lookup_hardreset(struct omap_hwmod *oh, const char *name,
|
|
struct omap_hwmod_rst_info *ohri)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < oh->rst_lines_cnt; i++) {
|
|
const char *rst_line = oh->rst_lines[i].name;
|
|
if (!strcmp(rst_line, name)) {
|
|
ohri->rst_shift = oh->rst_lines[i].rst_shift;
|
|
ohri->st_shift = oh->rst_lines[i].st_shift;
|
|
pr_debug("omap_hwmod: %s: %s: %s: rst %d st %d\n",
|
|
oh->name, __func__, rst_line, ohri->rst_shift,
|
|
ohri->st_shift);
|
|
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -ENOENT;
|
|
}
|
|
|
|
/**
|
|
* _assert_hardreset - assert the HW reset line of submodules
|
|
* contained in the hwmod module.
|
|
* @oh: struct omap_hwmod *
|
|
* @name: name of the reset line to lookup and assert
|
|
*
|
|
* Some IP like dsp, ipu or iva contain processor that require an HW
|
|
* reset line to be assert / deassert in order to enable fully the IP.
|
|
* Returns -EINVAL if @oh is null, -ENOSYS if we have no way of
|
|
* asserting the hardreset line on the currently-booted SoC, or passes
|
|
* along the return value from _lookup_hardreset() or the SoC's
|
|
* assert_hardreset code.
|
|
*/
|
|
static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
|
|
{
|
|
struct omap_hwmod_rst_info ohri;
|
|
int ret = -EINVAL;
|
|
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
if (!soc_ops.assert_hardreset)
|
|
return -ENOSYS;
|
|
|
|
ret = _lookup_hardreset(oh, name, &ohri);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = soc_ops.assert_hardreset(oh, &ohri);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* _deassert_hardreset - deassert the HW reset line of submodules contained
|
|
* in the hwmod module.
|
|
* @oh: struct omap_hwmod *
|
|
* @name: name of the reset line to look up and deassert
|
|
*
|
|
* Some IP like dsp, ipu or iva contain processor that require an HW
|
|
* reset line to be assert / deassert in order to enable fully the IP.
|
|
* Returns -EINVAL if @oh is null, -ENOSYS if we have no way of
|
|
* deasserting the hardreset line on the currently-booted SoC, or passes
|
|
* along the return value from _lookup_hardreset() or the SoC's
|
|
* deassert_hardreset code.
|
|
*/
|
|
static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
|
|
{
|
|
struct omap_hwmod_rst_info ohri;
|
|
int ret = -EINVAL;
|
|
int hwsup = 0;
|
|
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
if (!soc_ops.deassert_hardreset)
|
|
return -ENOSYS;
|
|
|
|
ret = _lookup_hardreset(oh, name, &ohri);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (oh->clkdm) {
|
|
/*
|
|
* A clockdomain must be in SW_SUP otherwise reset
|
|
* might not be completed. The clockdomain can be set
|
|
* in HW_AUTO only when the module become ready.
|
|
*/
|
|
hwsup = clkdm_in_hwsup(oh->clkdm);
|
|
ret = clkdm_hwmod_enable(oh->clkdm, oh);
|
|
if (ret) {
|
|
WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
|
|
oh->name, oh->clkdm->name, ret);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
_enable_clocks(oh);
|
|
if (soc_ops.enable_module)
|
|
soc_ops.enable_module(oh);
|
|
|
|
ret = soc_ops.deassert_hardreset(oh, &ohri);
|
|
|
|
if (soc_ops.disable_module)
|
|
soc_ops.disable_module(oh);
|
|
_disable_clocks(oh);
|
|
|
|
if (ret == -EBUSY)
|
|
pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name);
|
|
|
|
if (oh->clkdm) {
|
|
/*
|
|
* Set the clockdomain to HW_AUTO, assuming that the
|
|
* previous state was HW_AUTO.
|
|
*/
|
|
if (hwsup)
|
|
clkdm_allow_idle(oh->clkdm);
|
|
|
|
clkdm_hwmod_disable(oh->clkdm, oh);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* _read_hardreset - read the HW reset line state of submodules
|
|
* contained in the hwmod module
|
|
* @oh: struct omap_hwmod *
|
|
* @name: name of the reset line to look up and read
|
|
*
|
|
* Return the state of the reset line. Returns -EINVAL if @oh is
|
|
* null, -ENOSYS if we have no way of reading the hardreset line
|
|
* status on the currently-booted SoC, or passes along the return
|
|
* value from _lookup_hardreset() or the SoC's is_hardreset_asserted
|
|
* code.
|
|
*/
|
|
static int _read_hardreset(struct omap_hwmod *oh, const char *name)
|
|
{
|
|
struct omap_hwmod_rst_info ohri;
|
|
int ret = -EINVAL;
|
|
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
if (!soc_ops.is_hardreset_asserted)
|
|
return -ENOSYS;
|
|
|
|
ret = _lookup_hardreset(oh, name, &ohri);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return soc_ops.is_hardreset_asserted(oh, &ohri);
|
|
}
|
|
|
|
/**
|
|
* _are_all_hardreset_lines_asserted - return true if the @oh is hard-reset
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* If all hardreset lines associated with @oh are asserted, then return true.
|
|
* Otherwise, if part of @oh is out hardreset or if no hardreset lines
|
|
* associated with @oh are asserted, then return false.
|
|
* This function is used to avoid executing some parts of the IP block
|
|
* enable/disable sequence if its hardreset line is set.
|
|
*/
|
|
static bool _are_all_hardreset_lines_asserted(struct omap_hwmod *oh)
|
|
{
|
|
int i, rst_cnt = 0;
|
|
|
|
if (oh->rst_lines_cnt == 0)
|
|
return false;
|
|
|
|
for (i = 0; i < oh->rst_lines_cnt; i++)
|
|
if (_read_hardreset(oh, oh->rst_lines[i].name) > 0)
|
|
rst_cnt++;
|
|
|
|
if (oh->rst_lines_cnt == rst_cnt)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* _are_any_hardreset_lines_asserted - return true if any part of @oh is
|
|
* hard-reset
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* If any hardreset lines associated with @oh are asserted, then
|
|
* return true. Otherwise, if no hardreset lines associated with @oh
|
|
* are asserted, or if @oh has no hardreset lines, then return false.
|
|
* This function is used to avoid executing some parts of the IP block
|
|
* enable/disable sequence if any hardreset line is set.
|
|
*/
|
|
static bool _are_any_hardreset_lines_asserted(struct omap_hwmod *oh)
|
|
{
|
|
int rst_cnt = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < oh->rst_lines_cnt && rst_cnt == 0; i++)
|
|
if (_read_hardreset(oh, oh->rst_lines[i].name) > 0)
|
|
rst_cnt++;
|
|
|
|
return (rst_cnt) ? true : false;
|
|
}
|
|
|
|
/**
|
|
* _omap4_disable_module - enable CLKCTRL modulemode on OMAP4
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Disable the PRCM module mode related to the hwmod @oh.
|
|
* Return EINVAL if the modulemode is not supported and 0 in case of success.
|
|
*/
|
|
static int _omap4_disable_module(struct omap_hwmod *oh)
|
|
{
|
|
int v;
|
|
|
|
if (!oh->clkdm || !oh->prcm.omap4.modulemode)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Since integration code might still be doing something, only
|
|
* disable if all lines are under hardreset.
|
|
*/
|
|
if (_are_any_hardreset_lines_asserted(oh))
|
|
return 0;
|
|
|
|
pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
|
|
|
|
omap_cm_module_disable(oh->clkdm->prcm_partition, oh->clkdm->cm_inst,
|
|
oh->prcm.omap4.clkctrl_offs);
|
|
|
|
v = _omap4_wait_target_disable(oh);
|
|
if (v)
|
|
pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
|
|
oh->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _ocp_softreset - reset an omap_hwmod via the OCP_SYSCONFIG bit
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit. hwmod must be
|
|
* enabled for this to work. Returns -ENOENT if the hwmod cannot be
|
|
* reset this way, -EINVAL if the hwmod is in the wrong state,
|
|
* -ETIMEDOUT if the module did not reset in time, or 0 upon success.
|
|
*
|
|
* In OMAP3 a specific SYSSTATUS register is used to get the reset status.
|
|
* Starting in OMAP4, some IPs do not have SYSSTATUS registers and instead
|
|
* use the SYSCONFIG softreset bit to provide the status.
|
|
*
|
|
* Note that some IP like McBSP do have reset control but don't have
|
|
* reset status.
|
|
*/
|
|
static int _ocp_softreset(struct omap_hwmod *oh)
|
|
{
|
|
u32 v;
|
|
int c = 0;
|
|
int ret = 0;
|
|
|
|
if (!oh->class->sysc ||
|
|
!(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
|
|
return -ENOENT;
|
|
|
|
/* clocks must be on for this operation */
|
|
if (oh->_state != _HWMOD_STATE_ENABLED) {
|
|
pr_warn("omap_hwmod: %s: reset can only be entered from enabled state\n",
|
|
oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* For some modules, all optionnal clocks need to be enabled as well */
|
|
if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
|
|
_enable_optional_clocks(oh);
|
|
|
|
pr_debug("omap_hwmod: %s: resetting via OCP SOFTRESET\n", oh->name);
|
|
|
|
v = oh->_sysc_cache;
|
|
ret = _set_softreset(oh, &v);
|
|
if (ret)
|
|
goto dis_opt_clks;
|
|
|
|
_write_sysconfig(v, oh);
|
|
|
|
if (oh->class->sysc->srst_udelay)
|
|
udelay(oh->class->sysc->srst_udelay);
|
|
|
|
c = _wait_softreset_complete(oh);
|
|
if (c == MAX_MODULE_SOFTRESET_WAIT) {
|
|
pr_warn("omap_hwmod: %s: softreset failed (waited %d usec)\n",
|
|
oh->name, MAX_MODULE_SOFTRESET_WAIT);
|
|
ret = -ETIMEDOUT;
|
|
goto dis_opt_clks;
|
|
} else {
|
|
pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c);
|
|
}
|
|
|
|
ret = _clear_softreset(oh, &v);
|
|
if (ret)
|
|
goto dis_opt_clks;
|
|
|
|
_write_sysconfig(v, oh);
|
|
|
|
/*
|
|
* XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
|
|
* _wait_target_ready() or _reset()
|
|
*/
|
|
|
|
dis_opt_clks:
|
|
if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
|
|
_disable_optional_clocks(oh);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* _reset - reset an omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Resets an omap_hwmod @oh. If the module has a custom reset
|
|
* function pointer defined, then call it to reset the IP block, and
|
|
* pass along its return value to the caller. Otherwise, if the IP
|
|
* block has an OCP_SYSCONFIG register with a SOFTRESET bitfield
|
|
* associated with it, call a function to reset the IP block via that
|
|
* method, and pass along the return value to the caller. Finally, if
|
|
* the IP block has some hardreset lines associated with it, assert
|
|
* all of those, but do _not_ deassert them. (This is because driver
|
|
* authors have expressed an apparent requirement to control the
|
|
* deassertion of the hardreset lines themselves.)
|
|
*
|
|
* The default software reset mechanism for most OMAP IP blocks is
|
|
* triggered via the OCP_SYSCONFIG.SOFTRESET bit. However, some
|
|
* hwmods cannot be reset via this method. Some are not targets and
|
|
* therefore have no OCP header registers to access. Others (like the
|
|
* IVA) have idiosyncratic reset sequences. So for these relatively
|
|
* rare cases, custom reset code can be supplied in the struct
|
|
* omap_hwmod_class .reset function pointer.
|
|
*
|
|
* _set_dmadisable() is called to set the DMADISABLE bit so that it
|
|
* does not prevent idling of the system. This is necessary for cases
|
|
* where ROMCODE/BOOTLOADER uses dma and transfers control to the
|
|
* kernel without disabling dma.
|
|
*
|
|
* Passes along the return value from either _ocp_softreset() or the
|
|
* custom reset function - these must return -EINVAL if the hwmod
|
|
* cannot be reset this way or if the hwmod is in the wrong state,
|
|
* -ETIMEDOUT if the module did not reset in time, or 0 upon success.
|
|
*/
|
|
static int _reset(struct omap_hwmod *oh)
|
|
{
|
|
int i, r;
|
|
|
|
pr_debug("omap_hwmod: %s: resetting\n", oh->name);
|
|
|
|
if (oh->class->reset) {
|
|
r = oh->class->reset(oh);
|
|
} else {
|
|
if (oh->rst_lines_cnt > 0) {
|
|
for (i = 0; i < oh->rst_lines_cnt; i++)
|
|
_assert_hardreset(oh, oh->rst_lines[i].name);
|
|
return 0;
|
|
} else {
|
|
r = _ocp_softreset(oh);
|
|
if (r == -ENOENT)
|
|
r = 0;
|
|
}
|
|
}
|
|
|
|
_set_dmadisable(oh);
|
|
|
|
/*
|
|
* OCP_SYSCONFIG bits need to be reprogrammed after a
|
|
* softreset. The _enable() function should be split to avoid
|
|
* the rewrite of the OCP_SYSCONFIG register.
|
|
*/
|
|
if (oh->class->sysc) {
|
|
_update_sysc_cache(oh);
|
|
_enable_sysc(oh);
|
|
}
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* _reconfigure_io_chain - clear any I/O chain wakeups and reconfigure chain
|
|
*
|
|
* Call the appropriate PRM function to clear any logged I/O chain
|
|
* wakeups and to reconfigure the chain. This apparently needs to be
|
|
* done upon every mux change. Since hwmods can be concurrently
|
|
* enabled and idled, hold a spinlock around the I/O chain
|
|
* reconfiguration sequence. No return value.
|
|
*
|
|
* XXX When the PRM code is moved to drivers, this function can be removed,
|
|
* as the PRM infrastructure should abstract this.
|
|
*/
|
|
static void _reconfigure_io_chain(void)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&io_chain_lock, flags);
|
|
|
|
omap_prm_reconfigure_io_chain();
|
|
|
|
spin_unlock_irqrestore(&io_chain_lock, flags);
|
|
}
|
|
|
|
/**
|
|
* _omap4_update_context_lost - increment hwmod context loss counter if
|
|
* hwmod context was lost, and clear hardware context loss reg
|
|
* @oh: hwmod to check for context loss
|
|
*
|
|
* If the PRCM indicates that the hwmod @oh lost context, increment
|
|
* our in-memory context loss counter, and clear the RM_*_CONTEXT
|
|
* bits. No return value.
|
|
*/
|
|
static void _omap4_update_context_lost(struct omap_hwmod *oh)
|
|
{
|
|
if (oh->prcm.omap4.flags & HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT)
|
|
return;
|
|
|
|
if (!prm_was_any_context_lost_old(oh->clkdm->pwrdm.ptr->prcm_partition,
|
|
oh->clkdm->pwrdm.ptr->prcm_offs,
|
|
oh->prcm.omap4.context_offs))
|
|
return;
|
|
|
|
oh->prcm.omap4.context_lost_counter++;
|
|
prm_clear_context_loss_flags_old(oh->clkdm->pwrdm.ptr->prcm_partition,
|
|
oh->clkdm->pwrdm.ptr->prcm_offs,
|
|
oh->prcm.omap4.context_offs);
|
|
}
|
|
|
|
/**
|
|
* _omap4_get_context_lost - get context loss counter for a hwmod
|
|
* @oh: hwmod to get context loss counter for
|
|
*
|
|
* Returns the in-memory context loss counter for a hwmod.
|
|
*/
|
|
static int _omap4_get_context_lost(struct omap_hwmod *oh)
|
|
{
|
|
return oh->prcm.omap4.context_lost_counter;
|
|
}
|
|
|
|
/**
|
|
* _enable_preprogram - Pre-program an IP block during the _enable() process
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Some IP blocks (such as AESS) require some additional programming
|
|
* after enable before they can enter idle. If a function pointer to
|
|
* do so is present in the hwmod data, then call it and pass along the
|
|
* return value; otherwise, return 0.
|
|
*/
|
|
static int _enable_preprogram(struct omap_hwmod *oh)
|
|
{
|
|
if (!oh->class->enable_preprogram)
|
|
return 0;
|
|
|
|
return oh->class->enable_preprogram(oh);
|
|
}
|
|
|
|
/**
|
|
* _enable - enable an omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Enables an omap_hwmod @oh such that the MPU can access the hwmod's
|
|
* register target. Returns -EINVAL if the hwmod is in the wrong
|
|
* state or passes along the return value of _wait_target_ready().
|
|
*/
|
|
static int _enable(struct omap_hwmod *oh)
|
|
{
|
|
int r;
|
|
int hwsup = 0;
|
|
|
|
pr_debug("omap_hwmod: %s: enabling\n", oh->name);
|
|
|
|
/*
|
|
* hwmods with HWMOD_INIT_NO_IDLE flag set are left in enabled
|
|
* state at init. Now that someone is really trying to enable
|
|
* them, just ensure that the hwmod mux is set.
|
|
*/
|
|
if (oh->_int_flags & _HWMOD_SKIP_ENABLE) {
|
|
/*
|
|
* If the caller has mux data populated, do the mux'ing
|
|
* which wouldn't have been done as part of the _enable()
|
|
* done during setup.
|
|
*/
|
|
if (oh->mux)
|
|
omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
|
|
|
|
oh->_int_flags &= ~_HWMOD_SKIP_ENABLE;
|
|
return 0;
|
|
}
|
|
|
|
if (oh->_state != _HWMOD_STATE_INITIALIZED &&
|
|
oh->_state != _HWMOD_STATE_IDLE &&
|
|
oh->_state != _HWMOD_STATE_DISABLED) {
|
|
WARN(1, "omap_hwmod: %s: enabled state can only be entered from initialized, idle, or disabled state\n",
|
|
oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* If an IP block contains HW reset lines and all of them are
|
|
* asserted, we let integration code associated with that
|
|
* block handle the enable. We've received very little
|
|
* information on what those driver authors need, and until
|
|
* detailed information is provided and the driver code is
|
|
* posted to the public lists, this is probably the best we
|
|
* can do.
|
|
*/
|
|
if (_are_all_hardreset_lines_asserted(oh))
|
|
return 0;
|
|
|
|
/* Mux pins for device runtime if populated */
|
|
if (oh->mux && (!oh->mux->enabled ||
|
|
((oh->_state == _HWMOD_STATE_IDLE) &&
|
|
oh->mux->pads_dynamic))) {
|
|
omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED);
|
|
_reconfigure_io_chain();
|
|
} else if (oh->flags & HWMOD_RECONFIG_IO_CHAIN) {
|
|
_reconfigure_io_chain();
|
|
}
|
|
|
|
_add_initiator_dep(oh, mpu_oh);
|
|
|
|
if (oh->clkdm) {
|
|
/*
|
|
* A clockdomain must be in SW_SUP before enabling
|
|
* completely the module. The clockdomain can be set
|
|
* in HW_AUTO only when the module become ready.
|
|
*/
|
|
hwsup = clkdm_in_hwsup(oh->clkdm) &&
|
|
!clkdm_missing_idle_reporting(oh->clkdm);
|
|
r = clkdm_hwmod_enable(oh->clkdm, oh);
|
|
if (r) {
|
|
WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
|
|
oh->name, oh->clkdm->name, r);
|
|
return r;
|
|
}
|
|
}
|
|
|
|
_enable_clocks(oh);
|
|
if (soc_ops.enable_module)
|
|
soc_ops.enable_module(oh);
|
|
if (oh->flags & HWMOD_BLOCK_WFI)
|
|
cpu_idle_poll_ctrl(true);
|
|
|
|
if (soc_ops.update_context_lost)
|
|
soc_ops.update_context_lost(oh);
|
|
|
|
r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) :
|
|
-EINVAL;
|
|
if (!r) {
|
|
/*
|
|
* Set the clockdomain to HW_AUTO only if the target is ready,
|
|
* assuming that the previous state was HW_AUTO
|
|
*/
|
|
if (oh->clkdm && hwsup)
|
|
clkdm_allow_idle(oh->clkdm);
|
|
|
|
oh->_state = _HWMOD_STATE_ENABLED;
|
|
|
|
/* Access the sysconfig only if the target is ready */
|
|
if (oh->class->sysc) {
|
|
if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
|
|
_update_sysc_cache(oh);
|
|
_enable_sysc(oh);
|
|
}
|
|
r = _enable_preprogram(oh);
|
|
} else {
|
|
if (soc_ops.disable_module)
|
|
soc_ops.disable_module(oh);
|
|
_disable_clocks(oh);
|
|
pr_err("omap_hwmod: %s: _wait_target_ready failed: %d\n",
|
|
oh->name, r);
|
|
|
|
if (oh->clkdm)
|
|
clkdm_hwmod_disable(oh->clkdm, oh);
|
|
}
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* _idle - idle an omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Idles an omap_hwmod @oh. This should be called once the hwmod has
|
|
* no further work. Returns -EINVAL if the hwmod is in the wrong
|
|
* state or returns 0.
|
|
*/
|
|
static int _idle(struct omap_hwmod *oh)
|
|
{
|
|
pr_debug("omap_hwmod: %s: idling\n", oh->name);
|
|
|
|
if (oh->_state != _HWMOD_STATE_ENABLED) {
|
|
WARN(1, "omap_hwmod: %s: idle state can only be entered from enabled state\n",
|
|
oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (_are_all_hardreset_lines_asserted(oh))
|
|
return 0;
|
|
|
|
if (oh->class->sysc)
|
|
_idle_sysc(oh);
|
|
_del_initiator_dep(oh, mpu_oh);
|
|
|
|
if (oh->flags & HWMOD_BLOCK_WFI)
|
|
cpu_idle_poll_ctrl(false);
|
|
if (soc_ops.disable_module)
|
|
soc_ops.disable_module(oh);
|
|
|
|
/*
|
|
* The module must be in idle mode before disabling any parents
|
|
* clocks. Otherwise, the parent clock might be disabled before
|
|
* the module transition is done, and thus will prevent the
|
|
* transition to complete properly.
|
|
*/
|
|
_disable_clocks(oh);
|
|
if (oh->clkdm)
|
|
clkdm_hwmod_disable(oh->clkdm, oh);
|
|
|
|
/* Mux pins for device idle if populated */
|
|
if (oh->mux && oh->mux->pads_dynamic) {
|
|
omap_hwmod_mux(oh->mux, _HWMOD_STATE_IDLE);
|
|
_reconfigure_io_chain();
|
|
} else if (oh->flags & HWMOD_RECONFIG_IO_CHAIN) {
|
|
_reconfigure_io_chain();
|
|
}
|
|
|
|
oh->_state = _HWMOD_STATE_IDLE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _shutdown - shutdown an omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Shut down an omap_hwmod @oh. This should be called when the driver
|
|
* used for the hwmod is removed or unloaded or if the driver is not
|
|
* used by the system. Returns -EINVAL if the hwmod is in the wrong
|
|
* state or returns 0.
|
|
*/
|
|
static int _shutdown(struct omap_hwmod *oh)
|
|
{
|
|
int ret, i;
|
|
u8 prev_state;
|
|
|
|
if (oh->_state != _HWMOD_STATE_IDLE &&
|
|
oh->_state != _HWMOD_STATE_ENABLED) {
|
|
WARN(1, "omap_hwmod: %s: disabled state can only be entered from idle, or enabled state\n",
|
|
oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (_are_all_hardreset_lines_asserted(oh))
|
|
return 0;
|
|
|
|
pr_debug("omap_hwmod: %s: disabling\n", oh->name);
|
|
|
|
if (oh->class->pre_shutdown) {
|
|
prev_state = oh->_state;
|
|
if (oh->_state == _HWMOD_STATE_IDLE)
|
|
_enable(oh);
|
|
ret = oh->class->pre_shutdown(oh);
|
|
if (ret) {
|
|
if (prev_state == _HWMOD_STATE_IDLE)
|
|
_idle(oh);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (oh->class->sysc) {
|
|
if (oh->_state == _HWMOD_STATE_IDLE)
|
|
_enable(oh);
|
|
_shutdown_sysc(oh);
|
|
}
|
|
|
|
/* clocks and deps are already disabled in idle */
|
|
if (oh->_state == _HWMOD_STATE_ENABLED) {
|
|
_del_initiator_dep(oh, mpu_oh);
|
|
/* XXX what about the other system initiators here? dma, dsp */
|
|
if (oh->flags & HWMOD_BLOCK_WFI)
|
|
cpu_idle_poll_ctrl(false);
|
|
if (soc_ops.disable_module)
|
|
soc_ops.disable_module(oh);
|
|
_disable_clocks(oh);
|
|
if (oh->clkdm)
|
|
clkdm_hwmod_disable(oh->clkdm, oh);
|
|
}
|
|
/* XXX Should this code also force-disable the optional clocks? */
|
|
|
|
for (i = 0; i < oh->rst_lines_cnt; i++)
|
|
_assert_hardreset(oh, oh->rst_lines[i].name);
|
|
|
|
/* Mux pins to safe mode or use populated off mode values */
|
|
if (oh->mux)
|
|
omap_hwmod_mux(oh->mux, _HWMOD_STATE_DISABLED);
|
|
|
|
oh->_state = _HWMOD_STATE_DISABLED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int of_dev_find_hwmod(struct device_node *np,
|
|
struct omap_hwmod *oh)
|
|
{
|
|
int count, i, res;
|
|
const char *p;
|
|
|
|
count = of_property_count_strings(np, "ti,hwmods");
|
|
if (count < 1)
|
|
return -ENODEV;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
res = of_property_read_string_index(np, "ti,hwmods",
|
|
i, &p);
|
|
if (res)
|
|
continue;
|
|
if (!strcmp(p, oh->name)) {
|
|
pr_debug("omap_hwmod: dt %s[%i] uses hwmod %s\n",
|
|
np->name, i, oh->name);
|
|
return i;
|
|
}
|
|
}
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
/**
|
|
* of_dev_hwmod_lookup - look up needed hwmod from dt blob
|
|
* @np: struct device_node *
|
|
* @oh: struct omap_hwmod *
|
|
* @index: index of the entry found
|
|
* @found: struct device_node * found or NULL
|
|
*
|
|
* Parse the dt blob and find out needed hwmod. Recursive function is
|
|
* implemented to take care hierarchical dt blob parsing.
|
|
* Return: Returns 0 on success, -ENODEV when not found.
|
|
*/
|
|
static int of_dev_hwmod_lookup(struct device_node *np,
|
|
struct omap_hwmod *oh,
|
|
int *index,
|
|
struct device_node **found)
|
|
{
|
|
struct device_node *np0 = NULL;
|
|
int res;
|
|
|
|
res = of_dev_find_hwmod(np, oh);
|
|
if (res >= 0) {
|
|
*found = np;
|
|
*index = res;
|
|
return 0;
|
|
}
|
|
|
|
for_each_child_of_node(np, np0) {
|
|
struct device_node *fc;
|
|
int i;
|
|
|
|
res = of_dev_hwmod_lookup(np0, oh, &i, &fc);
|
|
if (res == 0) {
|
|
*found = fc;
|
|
*index = i;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
*found = NULL;
|
|
*index = 0;
|
|
|
|
return -ENODEV;
|
|
}
|
|
|
|
/**
|
|
* _init_mpu_rt_base - populate the virtual address for a hwmod
|
|
* @oh: struct omap_hwmod * to locate the virtual address
|
|
* @data: (unused, caller should pass NULL)
|
|
* @index: index of the reg entry iospace in device tree
|
|
* @np: struct device_node * of the IP block's device node in the DT data
|
|
*
|
|
* Cache the virtual address used by the MPU to access this IP block's
|
|
* registers. This address is needed early so the OCP registers that
|
|
* are part of the device's address space can be ioremapped properly.
|
|
*
|
|
* If SYSC access is not needed, the registers will not be remapped
|
|
* and non-availability of MPU access is not treated as an error.
|
|
*
|
|
* Returns 0 on success, -EINVAL if an invalid hwmod is passed, and
|
|
* -ENXIO on absent or invalid register target address space.
|
|
*/
|
|
static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
|
|
int index, struct device_node *np)
|
|
{
|
|
struct omap_hwmod_addr_space *mem;
|
|
void __iomem *va_start = NULL;
|
|
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
_save_mpu_port_index(oh);
|
|
|
|
/* if we don't need sysc access we don't need to ioremap */
|
|
if (!oh->class->sysc)
|
|
return 0;
|
|
|
|
/* we can't continue without MPU PORT if we need sysc access */
|
|
if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
|
|
return -ENXIO;
|
|
|
|
mem = _find_mpu_rt_addr_space(oh);
|
|
if (!mem) {
|
|
pr_debug("omap_hwmod: %s: no MPU register target found\n",
|
|
oh->name);
|
|
|
|
/* Extract the IO space from device tree blob */
|
|
if (!np) {
|
|
pr_err("omap_hwmod: %s: no dt node\n", oh->name);
|
|
return -ENXIO;
|
|
}
|
|
|
|
va_start = of_iomap(np, index + oh->mpu_rt_idx);
|
|
} else {
|
|
va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
|
|
}
|
|
|
|
if (!va_start) {
|
|
if (mem)
|
|
pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
|
|
else
|
|
pr_err("omap_hwmod: %s: Missing dt reg%i for %s\n",
|
|
oh->name, index, np->full_name);
|
|
return -ENXIO;
|
|
}
|
|
|
|
pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
|
|
oh->name, va_start);
|
|
|
|
oh->_mpu_rt_va = va_start;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _init - initialize internal data for the hwmod @oh
|
|
* @oh: struct omap_hwmod *
|
|
* @n: (unused)
|
|
*
|
|
* Look up the clocks and the address space used by the MPU to access
|
|
* registers belonging to the hwmod @oh. @oh must already be
|
|
* registered at this point. This is the first of two phases for
|
|
* hwmod initialization. Code called here does not touch any hardware
|
|
* registers, it simply prepares internal data structures. Returns 0
|
|
* upon success or if the hwmod isn't registered or if the hwmod's
|
|
* address space is not defined, or -EINVAL upon failure.
|
|
*/
|
|
static int __init _init(struct omap_hwmod *oh, void *data)
|
|
{
|
|
int r, index;
|
|
struct device_node *np = NULL;
|
|
|
|
if (oh->_state != _HWMOD_STATE_REGISTERED)
|
|
return 0;
|
|
|
|
if (of_have_populated_dt()) {
|
|
struct device_node *bus;
|
|
|
|
bus = of_find_node_by_name(NULL, "ocp");
|
|
if (!bus)
|
|
return -ENODEV;
|
|
|
|
r = of_dev_hwmod_lookup(bus, oh, &index, &np);
|
|
if (r)
|
|
pr_debug("omap_hwmod: %s missing dt data\n", oh->name);
|
|
else if (np && index)
|
|
pr_warn("omap_hwmod: %s using broken dt data from %s\n",
|
|
oh->name, np->name);
|
|
}
|
|
|
|
r = _init_mpu_rt_base(oh, NULL, index, np);
|
|
if (r < 0) {
|
|
WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
|
|
oh->name);
|
|
return 0;
|
|
}
|
|
|
|
r = _init_clocks(oh, NULL);
|
|
if (r < 0) {
|
|
WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (np) {
|
|
if (of_find_property(np, "ti,no-reset-on-init", NULL))
|
|
oh->flags |= HWMOD_INIT_NO_RESET;
|
|
if (of_find_property(np, "ti,no-idle-on-init", NULL))
|
|
oh->flags |= HWMOD_INIT_NO_IDLE;
|
|
}
|
|
|
|
oh->_state = _HWMOD_STATE_INITIALIZED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _setup_iclk_autoidle - configure an IP block's interface clocks
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Set up the module's interface clocks. XXX This function is still mostly
|
|
* a stub; implementing this properly requires iclk autoidle usecounting in
|
|
* the clock code. No return value.
|
|
*/
|
|
static void __init _setup_iclk_autoidle(struct omap_hwmod *oh)
|
|
{
|
|
struct omap_hwmod_ocp_if *os;
|
|
struct list_head *p;
|
|
int i = 0;
|
|
if (oh->_state != _HWMOD_STATE_INITIALIZED)
|
|
return;
|
|
|
|
p = oh->slave_ports.next;
|
|
|
|
while (i < oh->slaves_cnt) {
|
|
os = _fetch_next_ocp_if(&p, &i);
|
|
if (!os->_clk)
|
|
continue;
|
|
|
|
if (os->flags & OCPIF_SWSUP_IDLE) {
|
|
/* XXX omap_iclk_deny_idle(c); */
|
|
} else {
|
|
/* XXX omap_iclk_allow_idle(c); */
|
|
clk_enable(os->_clk);
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* _setup_reset - reset an IP block during the setup process
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Reset the IP block corresponding to the hwmod @oh during the setup
|
|
* process. The IP block is first enabled so it can be successfully
|
|
* reset. Returns 0 upon success or a negative error code upon
|
|
* failure.
|
|
*/
|
|
static int __init _setup_reset(struct omap_hwmod *oh)
|
|
{
|
|
int r;
|
|
|
|
if (oh->_state != _HWMOD_STATE_INITIALIZED)
|
|
return -EINVAL;
|
|
|
|
if (oh->flags & HWMOD_EXT_OPT_MAIN_CLK)
|
|
return -EPERM;
|
|
|
|
if (oh->rst_lines_cnt == 0) {
|
|
r = _enable(oh);
|
|
if (r) {
|
|
pr_warn("omap_hwmod: %s: cannot be enabled for reset (%d)\n",
|
|
oh->name, oh->_state);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (!(oh->flags & HWMOD_INIT_NO_RESET))
|
|
r = _reset(oh);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* _setup_postsetup - transition to the appropriate state after _setup
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Place an IP block represented by @oh into a "post-setup" state --
|
|
* either IDLE, ENABLED, or DISABLED. ("post-setup" simply means that
|
|
* this function is called at the end of _setup().) The postsetup
|
|
* state for an IP block can be changed by calling
|
|
* omap_hwmod_enter_postsetup_state() early in the boot process,
|
|
* before one of the omap_hwmod_setup*() functions are called for the
|
|
* IP block.
|
|
*
|
|
* The IP block stays in this state until a PM runtime-based driver is
|
|
* loaded for that IP block. A post-setup state of IDLE is
|
|
* appropriate for almost all IP blocks with runtime PM-enabled
|
|
* drivers, since those drivers are able to enable the IP block. A
|
|
* post-setup state of ENABLED is appropriate for kernels with PM
|
|
* runtime disabled. The DISABLED state is appropriate for unusual IP
|
|
* blocks such as the MPU WDTIMER on kernels without WDTIMER drivers
|
|
* included, since the WDTIMER starts running on reset and will reset
|
|
* the MPU if left active.
|
|
*
|
|
* This post-setup mechanism is deprecated. Once all of the OMAP
|
|
* drivers have been converted to use PM runtime, and all of the IP
|
|
* block data and interconnect data is available to the hwmod code, it
|
|
* should be possible to replace this mechanism with a "lazy reset"
|
|
* arrangement. In a "lazy reset" setup, each IP block is enabled
|
|
* when the driver first probes, then all remaining IP blocks without
|
|
* drivers are either shut down or enabled after the drivers have
|
|
* loaded. However, this cannot take place until the above
|
|
* preconditions have been met, since otherwise the late reset code
|
|
* has no way of knowing which IP blocks are in use by drivers, and
|
|
* which ones are unused.
|
|
*
|
|
* No return value.
|
|
*/
|
|
static void __init _setup_postsetup(struct omap_hwmod *oh)
|
|
{
|
|
u8 postsetup_state;
|
|
|
|
if (oh->rst_lines_cnt > 0)
|
|
return;
|
|
|
|
postsetup_state = oh->_postsetup_state;
|
|
if (postsetup_state == _HWMOD_STATE_UNKNOWN)
|
|
postsetup_state = _HWMOD_STATE_ENABLED;
|
|
|
|
/*
|
|
* XXX HWMOD_INIT_NO_IDLE does not belong in hwmod data -
|
|
* it should be set by the core code as a runtime flag during startup
|
|
*/
|
|
if ((oh->flags & HWMOD_INIT_NO_IDLE) &&
|
|
(postsetup_state == _HWMOD_STATE_IDLE)) {
|
|
oh->_int_flags |= _HWMOD_SKIP_ENABLE;
|
|
postsetup_state = _HWMOD_STATE_ENABLED;
|
|
}
|
|
|
|
if (postsetup_state == _HWMOD_STATE_IDLE)
|
|
_idle(oh);
|
|
else if (postsetup_state == _HWMOD_STATE_DISABLED)
|
|
_shutdown(oh);
|
|
else if (postsetup_state != _HWMOD_STATE_ENABLED)
|
|
WARN(1, "hwmod: %s: unknown postsetup state %d! defaulting to enabled\n",
|
|
oh->name, postsetup_state);
|
|
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* _setup - prepare IP block hardware for use
|
|
* @oh: struct omap_hwmod *
|
|
* @n: (unused, pass NULL)
|
|
*
|
|
* Configure the IP block represented by @oh. This may include
|
|
* enabling the IP block, resetting it, and placing it into a
|
|
* post-setup state, depending on the type of IP block and applicable
|
|
* flags. IP blocks are reset to prevent any previous configuration
|
|
* by the bootloader or previous operating system from interfering
|
|
* with power management or other parts of the system. The reset can
|
|
* be avoided; see omap_hwmod_no_setup_reset(). This is the second of
|
|
* two phases for hwmod initialization. Code called here generally
|
|
* affects the IP block hardware, or system integration hardware
|
|
* associated with the IP block. Returns 0.
|
|
*/
|
|
static int __init _setup(struct omap_hwmod *oh, void *data)
|
|
{
|
|
if (oh->_state != _HWMOD_STATE_INITIALIZED)
|
|
return 0;
|
|
|
|
if (oh->parent_hwmod) {
|
|
int r;
|
|
|
|
r = _enable(oh->parent_hwmod);
|
|
WARN(r, "hwmod: %s: setup: failed to enable parent hwmod %s\n",
|
|
oh->name, oh->parent_hwmod->name);
|
|
}
|
|
|
|
_setup_iclk_autoidle(oh);
|
|
|
|
if (!_setup_reset(oh))
|
|
_setup_postsetup(oh);
|
|
|
|
if (oh->parent_hwmod) {
|
|
u8 postsetup_state;
|
|
|
|
postsetup_state = oh->parent_hwmod->_postsetup_state;
|
|
|
|
if (postsetup_state == _HWMOD_STATE_IDLE)
|
|
_idle(oh->parent_hwmod);
|
|
else if (postsetup_state == _HWMOD_STATE_DISABLED)
|
|
_shutdown(oh->parent_hwmod);
|
|
else if (postsetup_state != _HWMOD_STATE_ENABLED)
|
|
WARN(1, "hwmod: %s: unknown postsetup state %d! defaulting to enabled\n",
|
|
oh->parent_hwmod->name, postsetup_state);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _register - register a struct omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Registers the omap_hwmod @oh. Returns -EEXIST if an omap_hwmod
|
|
* already has been registered by the same name; -EINVAL if the
|
|
* omap_hwmod is in the wrong state, if @oh is NULL, if the
|
|
* omap_hwmod's class field is NULL; if the omap_hwmod is missing a
|
|
* name, or if the omap_hwmod's class is missing a name; or 0 upon
|
|
* success.
|
|
*
|
|
* XXX The data should be copied into bootmem, so the original data
|
|
* should be marked __initdata and freed after init. This would allow
|
|
* unneeded omap_hwmods to be freed on multi-OMAP configurations. Note
|
|
* that the copy process would be relatively complex due to the large number
|
|
* of substructures.
|
|
*/
|
|
static int __init _register(struct omap_hwmod *oh)
|
|
{
|
|
if (!oh || !oh->name || !oh->class || !oh->class->name ||
|
|
(oh->_state != _HWMOD_STATE_UNKNOWN))
|
|
return -EINVAL;
|
|
|
|
pr_debug("omap_hwmod: %s: registering\n", oh->name);
|
|
|
|
if (_lookup(oh->name))
|
|
return -EEXIST;
|
|
|
|
list_add_tail(&oh->node, &omap_hwmod_list);
|
|
|
|
INIT_LIST_HEAD(&oh->master_ports);
|
|
INIT_LIST_HEAD(&oh->slave_ports);
|
|
spin_lock_init(&oh->_lock);
|
|
lockdep_set_class(&oh->_lock, &oh->hwmod_key);
|
|
|
|
oh->_state = _HWMOD_STATE_REGISTERED;
|
|
|
|
/*
|
|
* XXX Rather than doing a strcmp(), this should test a flag
|
|
* set in the hwmod data, inserted by the autogenerator code.
|
|
*/
|
|
if (!strcmp(oh->name, MPU_INITIATOR_NAME))
|
|
mpu_oh = oh;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _alloc_links - return allocated memory for hwmod links
|
|
* @ml: pointer to a struct omap_hwmod_link * for the master link
|
|
* @sl: pointer to a struct omap_hwmod_link * for the slave link
|
|
*
|
|
* Return pointers to two struct omap_hwmod_link records, via the
|
|
* addresses pointed to by @ml and @sl. Will first attempt to return
|
|
* memory allocated as part of a large initial block, but if that has
|
|
* been exhausted, will allocate memory itself. Since ideally this
|
|
* second allocation path will never occur, the number of these
|
|
* 'supplemental' allocations will be logged when debugging is
|
|
* enabled. Returns 0.
|
|
*/
|
|
static int __init _alloc_links(struct omap_hwmod_link **ml,
|
|
struct omap_hwmod_link **sl)
|
|
{
|
|
unsigned int sz;
|
|
|
|
if ((free_ls + LINKS_PER_OCP_IF) <= max_ls) {
|
|
*ml = &linkspace[free_ls++];
|
|
*sl = &linkspace[free_ls++];
|
|
return 0;
|
|
}
|
|
|
|
sz = sizeof(struct omap_hwmod_link) * LINKS_PER_OCP_IF;
|
|
|
|
*sl = NULL;
|
|
*ml = memblock_virt_alloc(sz, 0);
|
|
|
|
*sl = (void *)(*ml) + sizeof(struct omap_hwmod_link);
|
|
|
|
ls_supp++;
|
|
pr_debug("omap_hwmod: supplemental link allocations needed: %d\n",
|
|
ls_supp * LINKS_PER_OCP_IF);
|
|
|
|
return 0;
|
|
};
|
|
|
|
/**
|
|
* _add_link - add an interconnect between two IP blocks
|
|
* @oi: pointer to a struct omap_hwmod_ocp_if record
|
|
*
|
|
* Add struct omap_hwmod_link records connecting the master IP block
|
|
* specified in @oi->master to @oi, and connecting the slave IP block
|
|
* specified in @oi->slave to @oi. This code is assumed to run before
|
|
* preemption or SMP has been enabled, thus avoiding the need for
|
|
* locking in this code. Changes to this assumption will require
|
|
* additional locking. Returns 0.
|
|
*/
|
|
static int __init _add_link(struct omap_hwmod_ocp_if *oi)
|
|
{
|
|
struct omap_hwmod_link *ml, *sl;
|
|
|
|
pr_debug("omap_hwmod: %s -> %s: adding link\n", oi->master->name,
|
|
oi->slave->name);
|
|
|
|
_alloc_links(&ml, &sl);
|
|
|
|
ml->ocp_if = oi;
|
|
list_add(&ml->node, &oi->master->master_ports);
|
|
oi->master->masters_cnt++;
|
|
|
|
sl->ocp_if = oi;
|
|
list_add(&sl->node, &oi->slave->slave_ports);
|
|
oi->slave->slaves_cnt++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _register_link - register a struct omap_hwmod_ocp_if
|
|
* @oi: struct omap_hwmod_ocp_if *
|
|
*
|
|
* Registers the omap_hwmod_ocp_if record @oi. Returns -EEXIST if it
|
|
* has already been registered; -EINVAL if @oi is NULL or if the
|
|
* record pointed to by @oi is missing required fields; or 0 upon
|
|
* success.
|
|
*
|
|
* XXX The data should be copied into bootmem, so the original data
|
|
* should be marked __initdata and freed after init. This would allow
|
|
* unneeded omap_hwmods to be freed on multi-OMAP configurations.
|
|
*/
|
|
static int __init _register_link(struct omap_hwmod_ocp_if *oi)
|
|
{
|
|
if (!oi || !oi->master || !oi->slave || !oi->user)
|
|
return -EINVAL;
|
|
|
|
if (oi->_int_flags & _OCPIF_INT_FLAGS_REGISTERED)
|
|
return -EEXIST;
|
|
|
|
pr_debug("omap_hwmod: registering link from %s to %s\n",
|
|
oi->master->name, oi->slave->name);
|
|
|
|
/*
|
|
* Register the connected hwmods, if they haven't been
|
|
* registered already
|
|
*/
|
|
if (oi->master->_state != _HWMOD_STATE_REGISTERED)
|
|
_register(oi->master);
|
|
|
|
if (oi->slave->_state != _HWMOD_STATE_REGISTERED)
|
|
_register(oi->slave);
|
|
|
|
_add_link(oi);
|
|
|
|
oi->_int_flags |= _OCPIF_INT_FLAGS_REGISTERED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _alloc_linkspace - allocate large block of hwmod links
|
|
* @ois: pointer to an array of struct omap_hwmod_ocp_if records to count
|
|
*
|
|
* Allocate a large block of struct omap_hwmod_link records. This
|
|
* improves boot time significantly by avoiding the need to allocate
|
|
* individual records one by one. If the number of records to
|
|
* allocate in the block hasn't been manually specified, this function
|
|
* will count the number of struct omap_hwmod_ocp_if records in @ois
|
|
* and use that to determine the allocation size. For SoC families
|
|
* that require multiple list registrations, such as OMAP3xxx, this
|
|
* estimation process isn't optimal, so manual estimation is advised
|
|
* in those cases. Returns -EEXIST if the allocation has already occurred
|
|
* or 0 upon success.
|
|
*/
|
|
static int __init _alloc_linkspace(struct omap_hwmod_ocp_if **ois)
|
|
{
|
|
unsigned int i = 0;
|
|
unsigned int sz;
|
|
|
|
if (linkspace) {
|
|
WARN(1, "linkspace already allocated\n");
|
|
return -EEXIST;
|
|
}
|
|
|
|
if (max_ls == 0)
|
|
while (ois[i++])
|
|
max_ls += LINKS_PER_OCP_IF;
|
|
|
|
sz = sizeof(struct omap_hwmod_link) * max_ls;
|
|
|
|
pr_debug("omap_hwmod: %s: allocating %d byte linkspace (%d links)\n",
|
|
__func__, sz, max_ls);
|
|
|
|
linkspace = memblock_virt_alloc(sz, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Static functions intended only for use in soc_ops field function pointers */
|
|
|
|
/**
|
|
* _omap2xxx_3xxx_wait_target_ready - wait for a module to leave slave idle
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Wait for a module @oh to leave slave idle. Returns 0 if the module
|
|
* does not have an IDLEST bit or if the module successfully leaves
|
|
* slave idle; otherwise, pass along the return value of the
|
|
* appropriate *_cm*_wait_module_ready() function.
|
|
*/
|
|
static int _omap2xxx_3xxx_wait_target_ready(struct omap_hwmod *oh)
|
|
{
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
if (oh->flags & HWMOD_NO_IDLEST)
|
|
return 0;
|
|
|
|
if (!_find_mpu_rt_port(oh))
|
|
return 0;
|
|
|
|
/* XXX check module SIDLEMODE, hardreset status, enabled clocks */
|
|
|
|
return omap_cm_wait_module_ready(0, oh->prcm.omap2.module_offs,
|
|
oh->prcm.omap2.idlest_reg_id,
|
|
oh->prcm.omap2.idlest_idle_bit);
|
|
}
|
|
|
|
/**
|
|
* _omap4_wait_target_ready - wait for a module to leave slave idle
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Wait for a module @oh to leave slave idle. Returns 0 if the module
|
|
* does not have an IDLEST bit or if the module successfully leaves
|
|
* slave idle; otherwise, pass along the return value of the
|
|
* appropriate *_cm*_wait_module_ready() function.
|
|
*/
|
|
static int _omap4_wait_target_ready(struct omap_hwmod *oh)
|
|
{
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
if (oh->flags & HWMOD_NO_IDLEST || !oh->clkdm)
|
|
return 0;
|
|
|
|
if (!_find_mpu_rt_port(oh))
|
|
return 0;
|
|
|
|
/* XXX check module SIDLEMODE, hardreset status */
|
|
|
|
return omap_cm_wait_module_ready(oh->clkdm->prcm_partition,
|
|
oh->clkdm->cm_inst,
|
|
oh->prcm.omap4.clkctrl_offs, 0);
|
|
}
|
|
|
|
/**
|
|
* _omap2_assert_hardreset - call OMAP2 PRM hardreset fn with hwmod args
|
|
* @oh: struct omap_hwmod * to assert hardreset
|
|
* @ohri: hardreset line data
|
|
*
|
|
* Call omap2_prm_assert_hardreset() with parameters extracted from
|
|
* the hwmod @oh and the hardreset line data @ohri. Only intended for
|
|
* use as an soc_ops function pointer. Passes along the return value
|
|
* from omap2_prm_assert_hardreset(). XXX This function is scheduled
|
|
* for removal when the PRM code is moved into drivers/.
|
|
*/
|
|
static int _omap2_assert_hardreset(struct omap_hwmod *oh,
|
|
struct omap_hwmod_rst_info *ohri)
|
|
{
|
|
return omap_prm_assert_hardreset(ohri->rst_shift, 0,
|
|
oh->prcm.omap2.module_offs, 0);
|
|
}
|
|
|
|
/**
|
|
* _omap2_deassert_hardreset - call OMAP2 PRM hardreset fn with hwmod args
|
|
* @oh: struct omap_hwmod * to deassert hardreset
|
|
* @ohri: hardreset line data
|
|
*
|
|
* Call omap2_prm_deassert_hardreset() with parameters extracted from
|
|
* the hwmod @oh and the hardreset line data @ohri. Only intended for
|
|
* use as an soc_ops function pointer. Passes along the return value
|
|
* from omap2_prm_deassert_hardreset(). XXX This function is
|
|
* scheduled for removal when the PRM code is moved into drivers/.
|
|
*/
|
|
static int _omap2_deassert_hardreset(struct omap_hwmod *oh,
|
|
struct omap_hwmod_rst_info *ohri)
|
|
{
|
|
return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift, 0,
|
|
oh->prcm.omap2.module_offs, 0, 0);
|
|
}
|
|
|
|
/**
|
|
* _omap2_is_hardreset_asserted - call OMAP2 PRM hardreset fn with hwmod args
|
|
* @oh: struct omap_hwmod * to test hardreset
|
|
* @ohri: hardreset line data
|
|
*
|
|
* Call omap2_prm_is_hardreset_asserted() with parameters extracted
|
|
* from the hwmod @oh and the hardreset line data @ohri. Only
|
|
* intended for use as an soc_ops function pointer. Passes along the
|
|
* return value from omap2_prm_is_hardreset_asserted(). XXX This
|
|
* function is scheduled for removal when the PRM code is moved into
|
|
* drivers/.
|
|
*/
|
|
static int _omap2_is_hardreset_asserted(struct omap_hwmod *oh,
|
|
struct omap_hwmod_rst_info *ohri)
|
|
{
|
|
return omap_prm_is_hardreset_asserted(ohri->st_shift, 0,
|
|
oh->prcm.omap2.module_offs, 0);
|
|
}
|
|
|
|
/**
|
|
* _omap4_assert_hardreset - call OMAP4 PRM hardreset fn with hwmod args
|
|
* @oh: struct omap_hwmod * to assert hardreset
|
|
* @ohri: hardreset line data
|
|
*
|
|
* Call omap4_prminst_assert_hardreset() with parameters extracted
|
|
* from the hwmod @oh and the hardreset line data @ohri. Only
|
|
* intended for use as an soc_ops function pointer. Passes along the
|
|
* return value from omap4_prminst_assert_hardreset(). XXX This
|
|
* function is scheduled for removal when the PRM code is moved into
|
|
* drivers/.
|
|
*/
|
|
static int _omap4_assert_hardreset(struct omap_hwmod *oh,
|
|
struct omap_hwmod_rst_info *ohri)
|
|
{
|
|
if (!oh->clkdm)
|
|
return -EINVAL;
|
|
|
|
return omap_prm_assert_hardreset(ohri->rst_shift,
|
|
oh->clkdm->pwrdm.ptr->prcm_partition,
|
|
oh->clkdm->pwrdm.ptr->prcm_offs,
|
|
oh->prcm.omap4.rstctrl_offs);
|
|
}
|
|
|
|
/**
|
|
* _omap4_deassert_hardreset - call OMAP4 PRM hardreset fn with hwmod args
|
|
* @oh: struct omap_hwmod * to deassert hardreset
|
|
* @ohri: hardreset line data
|
|
*
|
|
* Call omap4_prminst_deassert_hardreset() with parameters extracted
|
|
* from the hwmod @oh and the hardreset line data @ohri. Only
|
|
* intended for use as an soc_ops function pointer. Passes along the
|
|
* return value from omap4_prminst_deassert_hardreset(). XXX This
|
|
* function is scheduled for removal when the PRM code is moved into
|
|
* drivers/.
|
|
*/
|
|
static int _omap4_deassert_hardreset(struct omap_hwmod *oh,
|
|
struct omap_hwmod_rst_info *ohri)
|
|
{
|
|
if (!oh->clkdm)
|
|
return -EINVAL;
|
|
|
|
if (ohri->st_shift)
|
|
pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
|
|
oh->name, ohri->name);
|
|
return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->rst_shift,
|
|
oh->clkdm->pwrdm.ptr->prcm_partition,
|
|
oh->clkdm->pwrdm.ptr->prcm_offs,
|
|
oh->prcm.omap4.rstctrl_offs,
|
|
oh->prcm.omap4.rstctrl_offs +
|
|
OMAP4_RST_CTRL_ST_OFFSET);
|
|
}
|
|
|
|
/**
|
|
* _omap4_is_hardreset_asserted - call OMAP4 PRM hardreset fn with hwmod args
|
|
* @oh: struct omap_hwmod * to test hardreset
|
|
* @ohri: hardreset line data
|
|
*
|
|
* Call omap4_prminst_is_hardreset_asserted() with parameters
|
|
* extracted from the hwmod @oh and the hardreset line data @ohri.
|
|
* Only intended for use as an soc_ops function pointer. Passes along
|
|
* the return value from omap4_prminst_is_hardreset_asserted(). XXX
|
|
* This function is scheduled for removal when the PRM code is moved
|
|
* into drivers/.
|
|
*/
|
|
static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh,
|
|
struct omap_hwmod_rst_info *ohri)
|
|
{
|
|
if (!oh->clkdm)
|
|
return -EINVAL;
|
|
|
|
return omap_prm_is_hardreset_asserted(ohri->rst_shift,
|
|
oh->clkdm->pwrdm.ptr->
|
|
prcm_partition,
|
|
oh->clkdm->pwrdm.ptr->prcm_offs,
|
|
oh->prcm.omap4.rstctrl_offs);
|
|
}
|
|
|
|
/**
|
|
* _am33xx_deassert_hardreset - call AM33XX PRM hardreset fn with hwmod args
|
|
* @oh: struct omap_hwmod * to deassert hardreset
|
|
* @ohri: hardreset line data
|
|
*
|
|
* Call am33xx_prminst_deassert_hardreset() with parameters extracted
|
|
* from the hwmod @oh and the hardreset line data @ohri. Only
|
|
* intended for use as an soc_ops function pointer. Passes along the
|
|
* return value from am33xx_prminst_deassert_hardreset(). XXX This
|
|
* function is scheduled for removal when the PRM code is moved into
|
|
* drivers/.
|
|
*/
|
|
static int _am33xx_deassert_hardreset(struct omap_hwmod *oh,
|
|
struct omap_hwmod_rst_info *ohri)
|
|
{
|
|
return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift,
|
|
oh->clkdm->pwrdm.ptr->prcm_partition,
|
|
oh->clkdm->pwrdm.ptr->prcm_offs,
|
|
oh->prcm.omap4.rstctrl_offs,
|
|
oh->prcm.omap4.rstst_offs);
|
|
}
|
|
|
|
/* Public functions */
|
|
|
|
u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs)
|
|
{
|
|
if (oh->flags & HWMOD_16BIT_REG)
|
|
return readw_relaxed(oh->_mpu_rt_va + reg_offs);
|
|
else
|
|
return readl_relaxed(oh->_mpu_rt_va + reg_offs);
|
|
}
|
|
|
|
void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
|
|
{
|
|
if (oh->flags & HWMOD_16BIT_REG)
|
|
writew_relaxed(v, oh->_mpu_rt_va + reg_offs);
|
|
else
|
|
writel_relaxed(v, oh->_mpu_rt_va + reg_offs);
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_softreset - reset a module via SYSCONFIG.SOFTRESET bit
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* This is a public function exposed to drivers. Some drivers may need to do
|
|
* some settings before and after resetting the device. Those drivers after
|
|
* doing the necessary settings could use this function to start a reset by
|
|
* setting the SYSCONFIG.SOFTRESET bit.
|
|
*/
|
|
int omap_hwmod_softreset(struct omap_hwmod *oh)
|
|
{
|
|
u32 v;
|
|
int ret;
|
|
|
|
if (!oh || !(oh->_sysc_cache))
|
|
return -EINVAL;
|
|
|
|
v = oh->_sysc_cache;
|
|
ret = _set_softreset(oh, &v);
|
|
if (ret)
|
|
goto error;
|
|
_write_sysconfig(v, oh);
|
|
|
|
ret = _clear_softreset(oh, &v);
|
|
if (ret)
|
|
goto error;
|
|
_write_sysconfig(v, oh);
|
|
|
|
error:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_lookup - look up a registered omap_hwmod by name
|
|
* @name: name of the omap_hwmod to look up
|
|
*
|
|
* Given a @name of an omap_hwmod, return a pointer to the registered
|
|
* struct omap_hwmod *, or NULL upon error.
|
|
*/
|
|
struct omap_hwmod *omap_hwmod_lookup(const char *name)
|
|
{
|
|
struct omap_hwmod *oh;
|
|
|
|
if (!name)
|
|
return NULL;
|
|
|
|
oh = _lookup(name);
|
|
|
|
return oh;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_for_each - call function for each registered omap_hwmod
|
|
* @fn: pointer to a callback function
|
|
* @data: void * data to pass to callback function
|
|
*
|
|
* Call @fn for each registered omap_hwmod, passing @data to each
|
|
* function. @fn must return 0 for success or any other value for
|
|
* failure. If @fn returns non-zero, the iteration across omap_hwmods
|
|
* will stop and the non-zero return value will be passed to the
|
|
* caller of omap_hwmod_for_each(). @fn is called with
|
|
* omap_hwmod_for_each() held.
|
|
*/
|
|
int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
|
|
void *data)
|
|
{
|
|
struct omap_hwmod *temp_oh;
|
|
int ret = 0;
|
|
|
|
if (!fn)
|
|
return -EINVAL;
|
|
|
|
list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
|
|
ret = (*fn)(temp_oh, data);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_register_links - register an array of hwmod links
|
|
* @ois: pointer to an array of omap_hwmod_ocp_if to register
|
|
*
|
|
* Intended to be called early in boot before the clock framework is
|
|
* initialized. If @ois is not null, will register all omap_hwmods
|
|
* listed in @ois that are valid for this chip. Returns -EINVAL if
|
|
* omap_hwmod_init() hasn't been called before calling this function,
|
|
* -ENOMEM if the link memory area can't be allocated, or 0 upon
|
|
* success.
|
|
*/
|
|
int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois)
|
|
{
|
|
int r, i;
|
|
|
|
if (!inited)
|
|
return -EINVAL;
|
|
|
|
if (!ois)
|
|
return 0;
|
|
|
|
if (ois[0] == NULL) /* Empty list */
|
|
return 0;
|
|
|
|
if (!linkspace) {
|
|
if (_alloc_linkspace(ois)) {
|
|
pr_err("omap_hwmod: could not allocate link space\n");
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
i = 0;
|
|
do {
|
|
r = _register_link(ois[i]);
|
|
WARN(r && r != -EEXIST,
|
|
"omap_hwmod: _register_link(%s -> %s) returned %d\n",
|
|
ois[i]->master->name, ois[i]->slave->name, r);
|
|
} while (ois[++i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _ensure_mpu_hwmod_is_setup - ensure the MPU SS hwmod is init'ed and set up
|
|
* @oh: pointer to the hwmod currently being set up (usually not the MPU)
|
|
*
|
|
* If the hwmod data corresponding to the MPU subsystem IP block
|
|
* hasn't been initialized and set up yet, do so now. This must be
|
|
* done first since sleep dependencies may be added from other hwmods
|
|
* to the MPU. Intended to be called only by omap_hwmod_setup*(). No
|
|
* return value.
|
|
*/
|
|
static void __init _ensure_mpu_hwmod_is_setup(struct omap_hwmod *oh)
|
|
{
|
|
if (!mpu_oh || mpu_oh->_state == _HWMOD_STATE_UNKNOWN)
|
|
pr_err("omap_hwmod: %s: MPU initiator hwmod %s not yet registered\n",
|
|
__func__, MPU_INITIATOR_NAME);
|
|
else if (mpu_oh->_state == _HWMOD_STATE_REGISTERED && oh != mpu_oh)
|
|
omap_hwmod_setup_one(MPU_INITIATOR_NAME);
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_setup_one - set up a single hwmod
|
|
* @oh_name: const char * name of the already-registered hwmod to set up
|
|
*
|
|
* Initialize and set up a single hwmod. Intended to be used for a
|
|
* small number of early devices, such as the timer IP blocks used for
|
|
* the scheduler clock. Must be called after omap2_clk_init().
|
|
* Resolves the struct clk names to struct clk pointers for each
|
|
* registered omap_hwmod. Also calls _setup() on each hwmod. Returns
|
|
* -EINVAL upon error or 0 upon success.
|
|
*/
|
|
int __init omap_hwmod_setup_one(const char *oh_name)
|
|
{
|
|
struct omap_hwmod *oh;
|
|
|
|
pr_debug("omap_hwmod: %s: %s\n", oh_name, __func__);
|
|
|
|
oh = _lookup(oh_name);
|
|
if (!oh) {
|
|
WARN(1, "omap_hwmod: %s: hwmod not yet registered\n", oh_name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
_ensure_mpu_hwmod_is_setup(oh);
|
|
|
|
_init(oh, NULL);
|
|
_setup(oh, NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_setup_all - set up all registered IP blocks
|
|
*
|
|
* Initialize and set up all IP blocks registered with the hwmod code.
|
|
* Must be called after omap2_clk_init(). Resolves the struct clk
|
|
* names to struct clk pointers for each registered omap_hwmod. Also
|
|
* calls _setup() on each hwmod. Returns 0 upon success.
|
|
*/
|
|
static int __init omap_hwmod_setup_all(void)
|
|
{
|
|
_ensure_mpu_hwmod_is_setup(NULL);
|
|
|
|
omap_hwmod_for_each(_init, NULL);
|
|
omap_hwmod_for_each(_setup, NULL);
|
|
|
|
return 0;
|
|
}
|
|
omap_core_initcall(omap_hwmod_setup_all);
|
|
|
|
/**
|
|
* omap_hwmod_enable - enable an omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Enable an omap_hwmod @oh. Intended to be called by omap_device_enable().
|
|
* Returns -EINVAL on error or passes along the return value from _enable().
|
|
*/
|
|
int omap_hwmod_enable(struct omap_hwmod *oh)
|
|
{
|
|
int r;
|
|
unsigned long flags;
|
|
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&oh->_lock, flags);
|
|
r = _enable(oh);
|
|
spin_unlock_irqrestore(&oh->_lock, flags);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_idle - idle an omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Idle an omap_hwmod @oh. Intended to be called by omap_device_idle().
|
|
* Returns -EINVAL on error or passes along the return value from _idle().
|
|
*/
|
|
int omap_hwmod_idle(struct omap_hwmod *oh)
|
|
{
|
|
int r;
|
|
unsigned long flags;
|
|
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&oh->_lock, flags);
|
|
r = _idle(oh);
|
|
spin_unlock_irqrestore(&oh->_lock, flags);
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_shutdown - shutdown an omap_hwmod
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Shutdown an omap_hwmod @oh. Intended to be called by
|
|
* omap_device_shutdown(). Returns -EINVAL on error or passes along
|
|
* the return value from _shutdown().
|
|
*/
|
|
int omap_hwmod_shutdown(struct omap_hwmod *oh)
|
|
{
|
|
int r;
|
|
unsigned long flags;
|
|
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&oh->_lock, flags);
|
|
r = _shutdown(oh);
|
|
spin_unlock_irqrestore(&oh->_lock, flags);
|
|
|
|
return r;
|
|
}
|
|
|
|
/*
|
|
* IP block data retrieval functions
|
|
*/
|
|
|
|
/**
|
|
* omap_hwmod_count_resources - count number of struct resources needed by hwmod
|
|
* @oh: struct omap_hwmod *
|
|
* @flags: Type of resources to include when counting (IRQ/DMA/MEM)
|
|
*
|
|
* Count the number of struct resource array elements necessary to
|
|
* contain omap_hwmod @oh resources. Intended to be called by code
|
|
* that registers omap_devices. Intended to be used to determine the
|
|
* size of a dynamically-allocated struct resource array, before
|
|
* calling omap_hwmod_fill_resources(). Returns the number of struct
|
|
* resource array elements needed.
|
|
*
|
|
* XXX This code is not optimized. It could attempt to merge adjacent
|
|
* resource IDs.
|
|
*
|
|
*/
|
|
int omap_hwmod_count_resources(struct omap_hwmod *oh, unsigned long flags)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (flags & IORESOURCE_IRQ)
|
|
ret += _count_mpu_irqs(oh);
|
|
|
|
if (flags & IORESOURCE_DMA)
|
|
ret += _count_sdma_reqs(oh);
|
|
|
|
if (flags & IORESOURCE_MEM) {
|
|
int i = 0;
|
|
struct omap_hwmod_ocp_if *os;
|
|
struct list_head *p = oh->slave_ports.next;
|
|
|
|
while (i < oh->slaves_cnt) {
|
|
os = _fetch_next_ocp_if(&p, &i);
|
|
ret += _count_ocp_if_addr_spaces(os);
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_fill_resources - fill struct resource array with hwmod data
|
|
* @oh: struct omap_hwmod *
|
|
* @res: pointer to the first element of an array of struct resource to fill
|
|
*
|
|
* Fill the struct resource array @res with resource data from the
|
|
* omap_hwmod @oh. Intended to be called by code that registers
|
|
* omap_devices. See also omap_hwmod_count_resources(). Returns the
|
|
* number of array elements filled.
|
|
*/
|
|
int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
|
|
{
|
|
struct omap_hwmod_ocp_if *os;
|
|
struct list_head *p;
|
|
int i, j, mpu_irqs_cnt, sdma_reqs_cnt, addr_cnt;
|
|
int r = 0;
|
|
|
|
/* For each IRQ, DMA, memory area, fill in array.*/
|
|
|
|
mpu_irqs_cnt = _count_mpu_irqs(oh);
|
|
for (i = 0; i < mpu_irqs_cnt; i++) {
|
|
unsigned int irq;
|
|
|
|
if (oh->xlate_irq)
|
|
irq = oh->xlate_irq((oh->mpu_irqs + i)->irq);
|
|
else
|
|
irq = (oh->mpu_irqs + i)->irq;
|
|
(res + r)->name = (oh->mpu_irqs + i)->name;
|
|
(res + r)->start = irq;
|
|
(res + r)->end = irq;
|
|
(res + r)->flags = IORESOURCE_IRQ;
|
|
r++;
|
|
}
|
|
|
|
sdma_reqs_cnt = _count_sdma_reqs(oh);
|
|
for (i = 0; i < sdma_reqs_cnt; i++) {
|
|
(res + r)->name = (oh->sdma_reqs + i)->name;
|
|
(res + r)->start = (oh->sdma_reqs + i)->dma_req;
|
|
(res + r)->end = (oh->sdma_reqs + i)->dma_req;
|
|
(res + r)->flags = IORESOURCE_DMA;
|
|
r++;
|
|
}
|
|
|
|
p = oh->slave_ports.next;
|
|
|
|
i = 0;
|
|
while (i < oh->slaves_cnt) {
|
|
os = _fetch_next_ocp_if(&p, &i);
|
|
addr_cnt = _count_ocp_if_addr_spaces(os);
|
|
|
|
for (j = 0; j < addr_cnt; j++) {
|
|
(res + r)->name = (os->addr + j)->name;
|
|
(res + r)->start = (os->addr + j)->pa_start;
|
|
(res + r)->end = (os->addr + j)->pa_end;
|
|
(res + r)->flags = IORESOURCE_MEM;
|
|
r++;
|
|
}
|
|
}
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_fill_dma_resources - fill struct resource array with dma data
|
|
* @oh: struct omap_hwmod *
|
|
* @res: pointer to the array of struct resource to fill
|
|
*
|
|
* Fill the struct resource array @res with dma resource data from the
|
|
* omap_hwmod @oh. Intended to be called by code that registers
|
|
* omap_devices. See also omap_hwmod_count_resources(). Returns the
|
|
* number of array elements filled.
|
|
*/
|
|
int omap_hwmod_fill_dma_resources(struct omap_hwmod *oh, struct resource *res)
|
|
{
|
|
int i, sdma_reqs_cnt;
|
|
int r = 0;
|
|
|
|
sdma_reqs_cnt = _count_sdma_reqs(oh);
|
|
for (i = 0; i < sdma_reqs_cnt; i++) {
|
|
(res + r)->name = (oh->sdma_reqs + i)->name;
|
|
(res + r)->start = (oh->sdma_reqs + i)->dma_req;
|
|
(res + r)->end = (oh->sdma_reqs + i)->dma_req;
|
|
(res + r)->flags = IORESOURCE_DMA;
|
|
r++;
|
|
}
|
|
|
|
return r;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_get_resource_byname - fetch IP block integration data by name
|
|
* @oh: struct omap_hwmod * to operate on
|
|
* @type: one of the IORESOURCE_* constants from include/linux/ioport.h
|
|
* @name: pointer to the name of the data to fetch (optional)
|
|
* @rsrc: pointer to a struct resource, allocated by the caller
|
|
*
|
|
* Retrieve MPU IRQ, SDMA request line, or address space start/end
|
|
* data for the IP block pointed to by @oh. The data will be filled
|
|
* into a struct resource record pointed to by @rsrc. The struct
|
|
* resource must be allocated by the caller. When @name is non-null,
|
|
* the data associated with the matching entry in the IRQ/SDMA/address
|
|
* space hwmod data arrays will be returned. If @name is null, the
|
|
* first array entry will be returned. Data order is not meaningful
|
|
* in hwmod data, so callers are strongly encouraged to use a non-null
|
|
* @name whenever possible to avoid unpredictable effects if hwmod
|
|
* data is later added that causes data ordering to change. This
|
|
* function is only intended for use by OMAP core code. Device
|
|
* drivers should not call this function - the appropriate bus-related
|
|
* data accessor functions should be used instead. Returns 0 upon
|
|
* success or a negative error code upon error.
|
|
*/
|
|
int omap_hwmod_get_resource_byname(struct omap_hwmod *oh, unsigned int type,
|
|
const char *name, struct resource *rsrc)
|
|
{
|
|
int r;
|
|
unsigned int irq, dma;
|
|
u32 pa_start, pa_end;
|
|
|
|
if (!oh || !rsrc)
|
|
return -EINVAL;
|
|
|
|
if (type == IORESOURCE_IRQ) {
|
|
r = _get_mpu_irq_by_name(oh, name, &irq);
|
|
if (r)
|
|
return r;
|
|
|
|
rsrc->start = irq;
|
|
rsrc->end = irq;
|
|
} else if (type == IORESOURCE_DMA) {
|
|
r = _get_sdma_req_by_name(oh, name, &dma);
|
|
if (r)
|
|
return r;
|
|
|
|
rsrc->start = dma;
|
|
rsrc->end = dma;
|
|
} else if (type == IORESOURCE_MEM) {
|
|
r = _get_addr_space_by_name(oh, name, &pa_start, &pa_end);
|
|
if (r)
|
|
return r;
|
|
|
|
rsrc->start = pa_start;
|
|
rsrc->end = pa_end;
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
|
|
rsrc->flags = type;
|
|
rsrc->name = name;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_get_pwrdm - return pointer to this module's main powerdomain
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Return the powerdomain pointer associated with the OMAP module
|
|
* @oh's main clock. If @oh does not have a main clk, return the
|
|
* powerdomain associated with the interface clock associated with the
|
|
* module's MPU port. (XXX Perhaps this should use the SDMA port
|
|
* instead?) Returns NULL on error, or a struct powerdomain * on
|
|
* success.
|
|
*/
|
|
struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
|
|
{
|
|
struct clk *c;
|
|
struct omap_hwmod_ocp_if *oi;
|
|
struct clockdomain *clkdm;
|
|
struct clk_hw_omap *clk;
|
|
|
|
if (!oh)
|
|
return NULL;
|
|
|
|
if (oh->clkdm)
|
|
return oh->clkdm->pwrdm.ptr;
|
|
|
|
if (oh->_clk) {
|
|
c = oh->_clk;
|
|
} else {
|
|
oi = _find_mpu_rt_port(oh);
|
|
if (!oi)
|
|
return NULL;
|
|
c = oi->_clk;
|
|
}
|
|
|
|
clk = to_clk_hw_omap(__clk_get_hw(c));
|
|
clkdm = clk->clkdm;
|
|
if (!clkdm)
|
|
return NULL;
|
|
|
|
return clkdm->pwrdm.ptr;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_get_mpu_rt_va - return the module's base address (for the MPU)
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Returns the virtual address corresponding to the beginning of the
|
|
* module's register target, in the address range that is intended to
|
|
* be used by the MPU. Returns the virtual address upon success or NULL
|
|
* upon error.
|
|
*/
|
|
void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh)
|
|
{
|
|
if (!oh)
|
|
return NULL;
|
|
|
|
if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
|
|
return NULL;
|
|
|
|
if (oh->_state == _HWMOD_STATE_UNKNOWN)
|
|
return NULL;
|
|
|
|
return oh->_mpu_rt_va;
|
|
}
|
|
|
|
/*
|
|
* XXX what about functions for drivers to save/restore ocp_sysconfig
|
|
* for context save/restore operations?
|
|
*/
|
|
|
|
/**
|
|
* omap_hwmod_enable_wakeup - allow device to wake up the system
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Sets the module OCP socket ENAWAKEUP bit to allow the module to
|
|
* send wakeups to the PRCM, and enable I/O ring wakeup events for
|
|
* this IP block if it has dynamic mux entries. Eventually this
|
|
* should set PRCM wakeup registers to cause the PRCM to receive
|
|
* wakeup events from the module. Does not set any wakeup routing
|
|
* registers beyond this point - if the module is to wake up any other
|
|
* module or subsystem, that must be set separately. Called by
|
|
* omap_device code. Returns -EINVAL on error or 0 upon success.
|
|
*/
|
|
int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
|
|
{
|
|
unsigned long flags;
|
|
u32 v;
|
|
|
|
spin_lock_irqsave(&oh->_lock, flags);
|
|
|
|
if (oh->class->sysc &&
|
|
(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) {
|
|
v = oh->_sysc_cache;
|
|
_enable_wakeup(oh, &v);
|
|
_write_sysconfig(v, oh);
|
|
}
|
|
|
|
_set_idle_ioring_wakeup(oh, true);
|
|
spin_unlock_irqrestore(&oh->_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_disable_wakeup - prevent device from waking the system
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Clears the module OCP socket ENAWAKEUP bit to prevent the module
|
|
* from sending wakeups to the PRCM, and disable I/O ring wakeup
|
|
* events for this IP block if it has dynamic mux entries. Eventually
|
|
* this should clear PRCM wakeup registers to cause the PRCM to ignore
|
|
* wakeup events from the module. Does not set any wakeup routing
|
|
* registers beyond this point - if the module is to wake up any other
|
|
* module or subsystem, that must be set separately. Called by
|
|
* omap_device code. Returns -EINVAL on error or 0 upon success.
|
|
*/
|
|
int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
|
|
{
|
|
unsigned long flags;
|
|
u32 v;
|
|
|
|
spin_lock_irqsave(&oh->_lock, flags);
|
|
|
|
if (oh->class->sysc &&
|
|
(oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)) {
|
|
v = oh->_sysc_cache;
|
|
_disable_wakeup(oh, &v);
|
|
_write_sysconfig(v, oh);
|
|
}
|
|
|
|
_set_idle_ioring_wakeup(oh, false);
|
|
spin_unlock_irqrestore(&oh->_lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_assert_hardreset - assert the HW reset line of submodules
|
|
* contained in the hwmod module.
|
|
* @oh: struct omap_hwmod *
|
|
* @name: name of the reset line to lookup and assert
|
|
*
|
|
* Some IP like dsp, ipu or iva contain processor that require
|
|
* an HW reset line to be assert / deassert in order to enable fully
|
|
* the IP. Returns -EINVAL if @oh is null or if the operation is not
|
|
* yet supported on this OMAP; otherwise, passes along the return value
|
|
* from _assert_hardreset().
|
|
*/
|
|
int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name)
|
|
{
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&oh->_lock, flags);
|
|
ret = _assert_hardreset(oh, name);
|
|
spin_unlock_irqrestore(&oh->_lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_deassert_hardreset - deassert the HW reset line of submodules
|
|
* contained in the hwmod module.
|
|
* @oh: struct omap_hwmod *
|
|
* @name: name of the reset line to look up and deassert
|
|
*
|
|
* Some IP like dsp, ipu or iva contain processor that require
|
|
* an HW reset line to be assert / deassert in order to enable fully
|
|
* the IP. Returns -EINVAL if @oh is null or if the operation is not
|
|
* yet supported on this OMAP; otherwise, passes along the return value
|
|
* from _deassert_hardreset().
|
|
*/
|
|
int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name)
|
|
{
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&oh->_lock, flags);
|
|
ret = _deassert_hardreset(oh, name);
|
|
spin_unlock_irqrestore(&oh->_lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_for_each_by_class - call @fn for each hwmod of class @classname
|
|
* @classname: struct omap_hwmod_class name to search for
|
|
* @fn: callback function pointer to call for each hwmod in class @classname
|
|
* @user: arbitrary context data to pass to the callback function
|
|
*
|
|
* For each omap_hwmod of class @classname, call @fn.
|
|
* If the callback function returns something other than
|
|
* zero, the iterator is terminated, and the callback function's return
|
|
* value is passed back to the caller. Returns 0 upon success, -EINVAL
|
|
* if @classname or @fn are NULL, or passes back the error code from @fn.
|
|
*/
|
|
int omap_hwmod_for_each_by_class(const char *classname,
|
|
int (*fn)(struct omap_hwmod *oh,
|
|
void *user),
|
|
void *user)
|
|
{
|
|
struct omap_hwmod *temp_oh;
|
|
int ret = 0;
|
|
|
|
if (!classname || !fn)
|
|
return -EINVAL;
|
|
|
|
pr_debug("omap_hwmod: %s: looking for modules of class %s\n",
|
|
__func__, classname);
|
|
|
|
list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
|
|
if (!strcmp(temp_oh->class->name, classname)) {
|
|
pr_debug("omap_hwmod: %s: %s: calling callback fn\n",
|
|
__func__, temp_oh->name);
|
|
ret = (*fn)(temp_oh, user);
|
|
if (ret)
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (ret)
|
|
pr_debug("omap_hwmod: %s: iterator terminated early: %d\n",
|
|
__func__, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_set_postsetup_state - set the post-_setup() state for this hwmod
|
|
* @oh: struct omap_hwmod *
|
|
* @state: state that _setup() should leave the hwmod in
|
|
*
|
|
* Sets the hwmod state that @oh will enter at the end of _setup()
|
|
* (called by omap_hwmod_setup_*()). See also the documentation
|
|
* for _setup_postsetup(), above. Returns 0 upon success or
|
|
* -EINVAL if there is a problem with the arguments or if the hwmod is
|
|
* in the wrong state.
|
|
*/
|
|
int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state)
|
|
{
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
if (!oh)
|
|
return -EINVAL;
|
|
|
|
if (state != _HWMOD_STATE_DISABLED &&
|
|
state != _HWMOD_STATE_ENABLED &&
|
|
state != _HWMOD_STATE_IDLE)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&oh->_lock, flags);
|
|
|
|
if (oh->_state != _HWMOD_STATE_REGISTERED) {
|
|
ret = -EINVAL;
|
|
goto ohsps_unlock;
|
|
}
|
|
|
|
oh->_postsetup_state = state;
|
|
ret = 0;
|
|
|
|
ohsps_unlock:
|
|
spin_unlock_irqrestore(&oh->_lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_get_context_loss_count - get lost context count
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Returns the context loss count of associated @oh
|
|
* upon success, or zero if no context loss data is available.
|
|
*
|
|
* On OMAP4, this queries the per-hwmod context loss register,
|
|
* assuming one exists. If not, or on OMAP2/3, this queries the
|
|
* enclosing powerdomain context loss count.
|
|
*/
|
|
int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh)
|
|
{
|
|
struct powerdomain *pwrdm;
|
|
int ret = 0;
|
|
|
|
if (soc_ops.get_context_lost)
|
|
return soc_ops.get_context_lost(oh);
|
|
|
|
pwrdm = omap_hwmod_get_pwrdm(oh);
|
|
if (pwrdm)
|
|
ret = pwrdm_get_context_loss_count(pwrdm);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_init - initialize the hwmod code
|
|
*
|
|
* Sets up some function pointers needed by the hwmod code to operate on the
|
|
* currently-booted SoC. Intended to be called once during kernel init
|
|
* before any hwmods are registered. No return value.
|
|
*/
|
|
void __init omap_hwmod_init(void)
|
|
{
|
|
if (cpu_is_omap24xx()) {
|
|
soc_ops.wait_target_ready = _omap2xxx_3xxx_wait_target_ready;
|
|
soc_ops.assert_hardreset = _omap2_assert_hardreset;
|
|
soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
|
|
soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
|
|
} else if (cpu_is_omap34xx()) {
|
|
soc_ops.wait_target_ready = _omap2xxx_3xxx_wait_target_ready;
|
|
soc_ops.assert_hardreset = _omap2_assert_hardreset;
|
|
soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
|
|
soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
|
|
soc_ops.init_clkdm = _init_clkdm;
|
|
} else if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
|
|
soc_ops.enable_module = _omap4_enable_module;
|
|
soc_ops.disable_module = _omap4_disable_module;
|
|
soc_ops.wait_target_ready = _omap4_wait_target_ready;
|
|
soc_ops.assert_hardreset = _omap4_assert_hardreset;
|
|
soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
|
|
soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
|
|
soc_ops.init_clkdm = _init_clkdm;
|
|
soc_ops.update_context_lost = _omap4_update_context_lost;
|
|
soc_ops.get_context_lost = _omap4_get_context_lost;
|
|
} else if (cpu_is_ti814x() || cpu_is_ti816x() || soc_is_am33xx() ||
|
|
soc_is_am43xx()) {
|
|
soc_ops.enable_module = _omap4_enable_module;
|
|
soc_ops.disable_module = _omap4_disable_module;
|
|
soc_ops.wait_target_ready = _omap4_wait_target_ready;
|
|
soc_ops.assert_hardreset = _omap4_assert_hardreset;
|
|
soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
|
|
soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
|
|
soc_ops.init_clkdm = _init_clkdm;
|
|
} else {
|
|
WARN(1, "omap_hwmod: unknown SoC type\n");
|
|
}
|
|
|
|
inited = true;
|
|
}
|
|
|
|
/**
|
|
* omap_hwmod_get_main_clk - get pointer to main clock name
|
|
* @oh: struct omap_hwmod *
|
|
*
|
|
* Returns the main clock name assocated with @oh upon success,
|
|
* or NULL if @oh is NULL.
|
|
*/
|
|
const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh)
|
|
{
|
|
if (!oh)
|
|
return NULL;
|
|
|
|
return oh->main_clk;
|
|
}
|