![Tero Kristo](/assets/img/avatar_default.png)
AM43xx has slightly different reset register layout compared to OMAP4+, with varying status bit shifts and status register offsets. Current code assumes static offsets and identical status / reset control bit shifts, which is wrong. This patch adds PRM core support for passing the actual implementations from hwmod code. AM43xx mappings will be fixed in subsequent patch. Signed-off-by: Tero Kristo <t-kristo@ti.com> Reported-by: Dave Gerlach <d-gerlach@ti.com> Reported-by: Suman Anna <s-anna@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
197 lines
5.8 KiB
C
197 lines
5.8 KiB
C
/*
|
|
* OMAP4 PRM instance functions
|
|
*
|
|
* Copyright (C) 2009 Nokia Corporation
|
|
* Copyright (C) 2011 Texas Instruments, Inc.
|
|
* Paul Walmsley
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
|
|
#include "iomap.h"
|
|
#include "common.h"
|
|
#include "prcm-common.h"
|
|
#include "prm44xx.h"
|
|
#include "prm54xx.h"
|
|
#include "prm7xx.h"
|
|
#include "prminst44xx.h"
|
|
#include "prm-regbits-44xx.h"
|
|
#include "prcm44xx.h"
|
|
#include "prcm43xx.h"
|
|
#include "prcm_mpu44xx.h"
|
|
#include "soc.h"
|
|
|
|
static void __iomem *_prm_bases[OMAP4_MAX_PRCM_PARTITIONS];
|
|
|
|
static s32 prm_dev_inst = PRM_INSTANCE_UNKNOWN;
|
|
|
|
/**
|
|
* omap_prm_base_init - Populates the prm partitions
|
|
*
|
|
* Populates the base addresses of the _prm_bases
|
|
* array used for read/write of prm module registers.
|
|
*/
|
|
void omap_prm_base_init(void)
|
|
{
|
|
_prm_bases[OMAP4430_PRM_PARTITION] = prm_base;
|
|
_prm_bases[OMAP4430_PRCM_MPU_PARTITION] = prcm_mpu_base;
|
|
}
|
|
|
|
s32 omap4_prmst_get_prm_dev_inst(void)
|
|
{
|
|
return prm_dev_inst;
|
|
}
|
|
|
|
void omap4_prminst_set_prm_dev_inst(s32 dev_inst)
|
|
{
|
|
prm_dev_inst = dev_inst;
|
|
}
|
|
|
|
/* Read a register in a PRM instance */
|
|
u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx)
|
|
{
|
|
BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
|
|
part == OMAP4430_INVALID_PRCM_PARTITION ||
|
|
!_prm_bases[part]);
|
|
return readl_relaxed(_prm_bases[part] + inst + idx);
|
|
}
|
|
|
|
/* Write into a register in a PRM instance */
|
|
void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx)
|
|
{
|
|
BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
|
|
part == OMAP4430_INVALID_PRCM_PARTITION ||
|
|
!_prm_bases[part]);
|
|
writel_relaxed(val, _prm_bases[part] + inst + idx);
|
|
}
|
|
|
|
/* Read-modify-write a register in PRM. Caller must lock */
|
|
u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst,
|
|
u16 idx)
|
|
{
|
|
u32 v;
|
|
|
|
v = omap4_prminst_read_inst_reg(part, inst, idx);
|
|
v &= ~mask;
|
|
v |= bits;
|
|
omap4_prminst_write_inst_reg(v, part, inst, idx);
|
|
|
|
return v;
|
|
}
|
|
|
|
/**
|
|
* omap4_prminst_is_hardreset_asserted - read the HW reset line state of
|
|
* submodules contained in the hwmod module
|
|
* @rstctrl_reg: RM_RSTCTRL register address for this module
|
|
* @shift: register bit shift corresponding to the reset line to check
|
|
*
|
|
* Returns 1 if the (sub)module hardreset line is currently asserted,
|
|
* 0 if the (sub)module hardreset line is not currently asserted, or
|
|
* -EINVAL upon parameter error.
|
|
*/
|
|
int omap4_prminst_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
|
|
u16 rstctrl_offs)
|
|
{
|
|
u32 v;
|
|
|
|
v = omap4_prminst_read_inst_reg(part, inst, rstctrl_offs);
|
|
v &= 1 << shift;
|
|
v >>= shift;
|
|
|
|
return v;
|
|
}
|
|
|
|
/**
|
|
* omap4_prminst_assert_hardreset - assert the HW reset line of a submodule
|
|
* @rstctrl_reg: RM_RSTCTRL register address for this module
|
|
* @shift: register bit shift corresponding to the reset line to assert
|
|
*
|
|
* Some IPs like dsp, ipu or iva contain processors that require an HW
|
|
* reset line to be asserted / deasserted in order to fully enable the
|
|
* IP. These modules may have multiple hard-reset lines that reset
|
|
* different 'submodules' inside the IP block. This function will
|
|
* place the submodule into reset. Returns 0 upon success or -EINVAL
|
|
* upon an argument error.
|
|
*/
|
|
int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
|
|
u16 rstctrl_offs)
|
|
{
|
|
u32 mask = 1 << shift;
|
|
|
|
omap4_prminst_rmw_inst_reg_bits(mask, mask, part, inst, rstctrl_offs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap4_prminst_deassert_hardreset - deassert a submodule hardreset line and
|
|
* wait
|
|
* @shift: register bit shift corresponding to the reset line to deassert
|
|
* @st_shift: status bit offset corresponding to the reset line
|
|
* @part: PRM partition
|
|
* @inst: PRM instance offset
|
|
* @rstctrl_offs: reset register offset
|
|
* @rstst_offs: reset status register offset
|
|
*
|
|
* Some IPs like dsp, ipu or iva contain processors that require an HW
|
|
* reset line to be asserted / deasserted in order to fully enable the
|
|
* IP. These modules may have multiple hard-reset lines that reset
|
|
* different 'submodules' inside the IP block. This function will
|
|
* take the submodule out of reset and wait until the PRCM indicates
|
|
* that the reset has completed before returning. Returns 0 upon success or
|
|
* -EINVAL upon an argument error, -EEXIST if the submodule was already out
|
|
* of reset, or -EBUSY if the submodule did not exit reset promptly.
|
|
*/
|
|
int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst,
|
|
u16 rstctrl_offs, u16 rstst_offs)
|
|
{
|
|
int c;
|
|
u32 mask = 1 << shift;
|
|
u32 st_mask = 1 << st_shift;
|
|
|
|
/* Check the current status to avoid de-asserting the line twice */
|
|
if (omap4_prminst_is_hardreset_asserted(shift, part, inst,
|
|
rstctrl_offs) == 0)
|
|
return -EEXIST;
|
|
|
|
/* Clear the reset status by writing 1 to the status bit */
|
|
omap4_prminst_rmw_inst_reg_bits(0xffffffff, st_mask, part, inst,
|
|
rstst_offs);
|
|
/* de-assert the reset control line */
|
|
omap4_prminst_rmw_inst_reg_bits(mask, 0, part, inst, rstctrl_offs);
|
|
/* wait the status to be set */
|
|
omap_test_timeout(omap4_prminst_is_hardreset_asserted(st_shift, part,
|
|
inst, rstst_offs),
|
|
MAX_MODULE_HARDRESET_WAIT, c);
|
|
|
|
return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0;
|
|
}
|
|
|
|
|
|
void omap4_prminst_global_warm_sw_reset(void)
|
|
{
|
|
u32 v;
|
|
s32 inst = omap4_prmst_get_prm_dev_inst();
|
|
|
|
if (inst == PRM_INSTANCE_UNKNOWN)
|
|
return;
|
|
|
|
v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, inst,
|
|
OMAP4_PRM_RSTCTRL_OFFSET);
|
|
v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK;
|
|
omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION,
|
|
inst, OMAP4_PRM_RSTCTRL_OFFSET);
|
|
|
|
/* OCP barrier */
|
|
v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
|
|
inst, OMAP4_PRM_RSTCTRL_OFFSET);
|
|
}
|