![Russell King](/assets/img/avatar_default.png)
Restore the OMAP4 barrier behaviour using the new implementation which allows multiplatform systems to hook into the mb() and wmb() ARM implementations to perform any necessary additional barrier maintanence. Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
384 lines
10 KiB
ArmAsm
384 lines
10 KiB
ArmAsm
/*
|
|
* OMAP44xx sleep code.
|
|
*
|
|
* Copyright (C) 2011 Texas Instruments, Inc.
|
|
* Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
*
|
|
* This program is free software,you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
#include <asm/smp_scu.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/hardware/cache-l2x0.h>
|
|
|
|
#include "omap-secure.h"
|
|
|
|
#include "common.h"
|
|
#include "omap44xx.h"
|
|
#include "omap4-sar-layout.h"
|
|
|
|
#if defined(CONFIG_SMP) && defined(CONFIG_PM)
|
|
|
|
.macro DO_SMC
|
|
dsb
|
|
smc #0
|
|
dsb
|
|
.endm
|
|
|
|
ppa_zero_params:
|
|
.word 0x0
|
|
|
|
ppa_por_params:
|
|
.word 1, 0
|
|
|
|
#ifdef CONFIG_ARCH_OMAP4
|
|
|
|
/*
|
|
* =============================
|
|
* == CPU suspend finisher ==
|
|
* =============================
|
|
*
|
|
* void omap4_finish_suspend(unsigned long cpu_state)
|
|
*
|
|
* This function code saves the CPU context and performs the CPU
|
|
* power down sequence. Calling WFI effectively changes the CPU
|
|
* power domains states to the desired target power state.
|
|
*
|
|
* @cpu_state : contains context save state (r0)
|
|
* 0 - No context lost
|
|
* 1 - CPUx L1 and logic lost: MPUSS CSWR
|
|
* 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR
|
|
* 3 - CPUx L1 and logic lost + GIC + L2 lost: MPUSS OFF
|
|
* @return: This function never returns for CPU OFF and DORMANT power states.
|
|
* Post WFI, CPU transitions to DORMANT or OFF power state and on wake-up
|
|
* from this follows a full CPU reset path via ROM code to CPU restore code.
|
|
* The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET.
|
|
* It returns to the caller for CPU INACTIVE and ON power states or in case
|
|
* CPU failed to transition to targeted OFF/DORMANT state.
|
|
*
|
|
* omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save
|
|
* stack frame and it expects the caller to take care of it. Hence the entire
|
|
* stack frame is saved to avoid possible stack corruption.
|
|
*/
|
|
ENTRY(omap4_finish_suspend)
|
|
stmfd sp!, {r4-r12, lr}
|
|
cmp r0, #0x0
|
|
beq do_WFI @ No lowpower state, jump to WFI
|
|
|
|
/*
|
|
* Flush all data from the L1 data cache before disabling
|
|
* SCTLR.C bit.
|
|
*/
|
|
bl omap4_get_sar_ram_base
|
|
ldr r9, [r0, #OMAP_TYPE_OFFSET]
|
|
cmp r9, #0x1 @ Check for HS device
|
|
bne skip_secure_l1_clean
|
|
mov r0, #SCU_PM_NORMAL
|
|
mov r1, #0xFF @ clean seucre L1
|
|
stmfd r13!, {r4-r12, r14}
|
|
ldr r12, =OMAP4_MON_SCU_PWR_INDEX
|
|
DO_SMC
|
|
ldmfd r13!, {r4-r12, r14}
|
|
skip_secure_l1_clean:
|
|
bl v7_flush_dcache_all
|
|
|
|
/*
|
|
* Clear the SCTLR.C bit to prevent further data cache
|
|
* allocation. Clearing SCTLR.C would make all the data accesses
|
|
* strongly ordered and would not hit the cache.
|
|
*/
|
|
mrc p15, 0, r0, c1, c0, 0
|
|
bic r0, r0, #(1 << 2) @ Disable the C bit
|
|
mcr p15, 0, r0, c1, c0, 0
|
|
isb
|
|
|
|
/*
|
|
* Invalidate L1 data cache. Even though only invalidate is
|
|
* necessary exported flush API is used here. Doing clean
|
|
* on already clean cache would be almost NOP.
|
|
*/
|
|
bl v7_flush_dcache_all
|
|
|
|
/*
|
|
* Switch the CPU from Symmetric Multiprocessing (SMP) mode
|
|
* to AsymmetricMultiprocessing (AMP) mode by programming
|
|
* the SCU power status to DORMANT or OFF mode.
|
|
* This enables the CPU to be taken out of coherency by
|
|
* preventing the CPU from receiving cache, TLB, or BTB
|
|
* maintenance operations broadcast by other CPUs in the cluster.
|
|
*/
|
|
bl omap4_get_sar_ram_base
|
|
mov r8, r0
|
|
ldr r9, [r8, #OMAP_TYPE_OFFSET]
|
|
cmp r9, #0x1 @ Check for HS device
|
|
bne scu_gp_set
|
|
mrc p15, 0, r0, c0, c0, 5 @ Read MPIDR
|
|
ands r0, r0, #0x0f
|
|
ldreq r0, [r8, #SCU_OFFSET0]
|
|
ldrne r0, [r8, #SCU_OFFSET1]
|
|
mov r1, #0x00
|
|
stmfd r13!, {r4-r12, r14}
|
|
ldr r12, =OMAP4_MON_SCU_PWR_INDEX
|
|
DO_SMC
|
|
ldmfd r13!, {r4-r12, r14}
|
|
b skip_scu_gp_set
|
|
scu_gp_set:
|
|
mrc p15, 0, r0, c0, c0, 5 @ Read MPIDR
|
|
ands r0, r0, #0x0f
|
|
ldreq r1, [r8, #SCU_OFFSET0]
|
|
ldrne r1, [r8, #SCU_OFFSET1]
|
|
bl omap4_get_scu_base
|
|
bl scu_power_mode
|
|
skip_scu_gp_set:
|
|
mrc p15, 0, r0, c1, c1, 2 @ Read NSACR data
|
|
tst r0, #(1 << 18)
|
|
mrcne p15, 0, r0, c1, c0, 1
|
|
bicne r0, r0, #(1 << 6) @ Disable SMP bit
|
|
mcrne p15, 0, r0, c1, c0, 1
|
|
isb
|
|
dsb
|
|
#ifdef CONFIG_CACHE_L2X0
|
|
/*
|
|
* Clean and invalidate the L2 cache.
|
|
* Common cache-l2x0.c functions can't be used here since it
|
|
* uses spinlocks. We are out of coherency here with data cache
|
|
* disabled. The spinlock implementation uses exclusive load/store
|
|
* instruction which can fail without data cache being enabled.
|
|
* OMAP4 hardware doesn't support exclusive monitor which can
|
|
* overcome exclusive access issue. Because of this, CPU can
|
|
* lead to deadlock.
|
|
*/
|
|
bl omap4_get_sar_ram_base
|
|
mov r8, r0
|
|
mrc p15, 0, r5, c0, c0, 5 @ Read MPIDR
|
|
ands r5, r5, #0x0f
|
|
ldreq r0, [r8, #L2X0_SAVE_OFFSET0] @ Retrieve L2 state from SAR
|
|
ldrne r0, [r8, #L2X0_SAVE_OFFSET1] @ memory.
|
|
cmp r0, #3
|
|
bne do_WFI
|
|
#ifdef CONFIG_PL310_ERRATA_727915
|
|
mov r0, #0x03
|
|
mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
|
|
DO_SMC
|
|
#endif
|
|
bl omap4_get_l2cache_base
|
|
mov r2, r0
|
|
ldr r0, =0xffff
|
|
str r0, [r2, #L2X0_CLEAN_INV_WAY]
|
|
wait:
|
|
ldr r0, [r2, #L2X0_CLEAN_INV_WAY]
|
|
ldr r1, =0xffff
|
|
ands r0, r0, r1
|
|
bne wait
|
|
#ifdef CONFIG_PL310_ERRATA_727915
|
|
mov r0, #0x00
|
|
mov r12, #OMAP4_MON_L2X0_DBG_CTRL_INDEX
|
|
DO_SMC
|
|
#endif
|
|
l2x_sync:
|
|
bl omap4_get_l2cache_base
|
|
mov r2, r0
|
|
mov r0, #0x0
|
|
str r0, [r2, #L2X0_CACHE_SYNC]
|
|
sync:
|
|
ldr r0, [r2, #L2X0_CACHE_SYNC]
|
|
ands r0, r0, #0x1
|
|
bne sync
|
|
#endif
|
|
|
|
do_WFI:
|
|
bl omap_do_wfi
|
|
|
|
/*
|
|
* CPU is here when it failed to enter OFF/DORMANT or
|
|
* no low power state was attempted.
|
|
*/
|
|
mrc p15, 0, r0, c1, c0, 0
|
|
tst r0, #(1 << 2) @ Check C bit enabled?
|
|
orreq r0, r0, #(1 << 2) @ Enable the C bit
|
|
mcreq p15, 0, r0, c1, c0, 0
|
|
isb
|
|
|
|
/*
|
|
* Ensure the CPU power state is set to NORMAL in
|
|
* SCU power state so that CPU is back in coherency.
|
|
* In non-coherent mode CPU can lock-up and lead to
|
|
* system deadlock.
|
|
*/
|
|
mrc p15, 0, r0, c1, c0, 1
|
|
tst r0, #(1 << 6) @ Check SMP bit enabled?
|
|
orreq r0, r0, #(1 << 6)
|
|
mcreq p15, 0, r0, c1, c0, 1
|
|
isb
|
|
bl omap4_get_sar_ram_base
|
|
mov r8, r0
|
|
ldr r9, [r8, #OMAP_TYPE_OFFSET]
|
|
cmp r9, #0x1 @ Check for HS device
|
|
bne scu_gp_clear
|
|
mov r0, #SCU_PM_NORMAL
|
|
mov r1, #0x00
|
|
stmfd r13!, {r4-r12, r14}
|
|
ldr r12, =OMAP4_MON_SCU_PWR_INDEX
|
|
DO_SMC
|
|
ldmfd r13!, {r4-r12, r14}
|
|
b skip_scu_gp_clear
|
|
scu_gp_clear:
|
|
bl omap4_get_scu_base
|
|
mov r1, #SCU_PM_NORMAL
|
|
bl scu_power_mode
|
|
skip_scu_gp_clear:
|
|
isb
|
|
dsb
|
|
ldmfd sp!, {r4-r12, pc}
|
|
ENDPROC(omap4_finish_suspend)
|
|
|
|
/*
|
|
* ============================
|
|
* == CPU resume entry point ==
|
|
* ============================
|
|
*
|
|
* void omap4_cpu_resume(void)
|
|
*
|
|
* ROM code jumps to this function while waking up from CPU
|
|
* OFF or DORMANT state. Physical address of the function is
|
|
* stored in the SAR RAM while entering to OFF or DORMANT mode.
|
|
* The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET.
|
|
*/
|
|
ENTRY(omap4_cpu_resume)
|
|
/*
|
|
* Configure ACTRL and enable NS SMP bit access on CPU1 on HS device.
|
|
* OMAP44XX EMU/HS devices - CPU0 SMP bit access is enabled in PPA
|
|
* init and for CPU1, a secure PPA API provided. CPU0 must be ON
|
|
* while executing NS_SMP API on CPU1 and PPA version must be 1.4.0+.
|
|
* OMAP443X GP devices- SMP bit isn't accessible.
|
|
* OMAP446X GP devices - SMP bit access is enabled on both CPUs.
|
|
*/
|
|
ldr r8, =OMAP44XX_SAR_RAM_BASE
|
|
ldr r9, [r8, #OMAP_TYPE_OFFSET]
|
|
cmp r9, #0x1 @ Skip if GP device
|
|
bne skip_ns_smp_enable
|
|
mrc p15, 0, r0, c0, c0, 5
|
|
ands r0, r0, #0x0f
|
|
beq skip_ns_smp_enable
|
|
ppa_actrl_retry:
|
|
mov r0, #OMAP4_PPA_CPU_ACTRL_SMP_INDEX
|
|
adr r3, ppa_zero_params @ Pointer to parameters
|
|
mov r1, #0x0 @ Process ID
|
|
mov r2, #0x4 @ Flag
|
|
mov r6, #0xff
|
|
mov r12, #0x00 @ Secure Service ID
|
|
DO_SMC
|
|
cmp r0, #0x0 @ API returns 0 on success.
|
|
beq enable_smp_bit
|
|
b ppa_actrl_retry
|
|
enable_smp_bit:
|
|
mrc p15, 0, r0, c1, c0, 1
|
|
tst r0, #(1 << 6) @ Check SMP bit enabled?
|
|
orreq r0, r0, #(1 << 6)
|
|
mcreq p15, 0, r0, c1, c0, 1
|
|
isb
|
|
skip_ns_smp_enable:
|
|
#ifdef CONFIG_CACHE_L2X0
|
|
/*
|
|
* Restore the L2 AUXCTRL and enable the L2 cache.
|
|
* OMAP4_MON_L2X0_AUXCTRL_INDEX = Program the L2X0 AUXCTRL
|
|
* OMAP4_MON_L2X0_CTRL_INDEX = Enable the L2 using L2X0 CTRL
|
|
* register r0 contains value to be programmed.
|
|
* L2 cache is already invalidate by ROM code as part
|
|
* of MPUSS OFF wakeup path.
|
|
*/
|
|
ldr r2, =OMAP44XX_L2CACHE_BASE
|
|
ldr r0, [r2, #L2X0_CTRL]
|
|
and r0, #0x0f
|
|
cmp r0, #1
|
|
beq skip_l2en @ Skip if already enabled
|
|
ldr r3, =OMAP44XX_SAR_RAM_BASE
|
|
ldr r1, [r3, #OMAP_TYPE_OFFSET]
|
|
cmp r1, #0x1 @ Check for HS device
|
|
bne set_gp_por
|
|
ldr r0, =OMAP4_PPA_L2_POR_INDEX
|
|
ldr r1, =OMAP44XX_SAR_RAM_BASE
|
|
ldr r4, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
|
|
adr r3, ppa_por_params
|
|
str r4, [r3, #0x04]
|
|
mov r1, #0x0 @ Process ID
|
|
mov r2, #0x4 @ Flag
|
|
mov r6, #0xff
|
|
mov r12, #0x00 @ Secure Service ID
|
|
DO_SMC
|
|
b set_aux_ctrl
|
|
set_gp_por:
|
|
ldr r1, =OMAP44XX_SAR_RAM_BASE
|
|
ldr r0, [r1, #L2X0_PREFETCH_CTRL_OFFSET]
|
|
ldr r12, =OMAP4_MON_L2X0_PREFETCH_INDEX @ Setup L2 PREFETCH
|
|
DO_SMC
|
|
set_aux_ctrl:
|
|
ldr r1, =OMAP44XX_SAR_RAM_BASE
|
|
ldr r0, [r1, #L2X0_AUXCTRL_OFFSET]
|
|
ldr r12, =OMAP4_MON_L2X0_AUXCTRL_INDEX @ Setup L2 AUXCTRL
|
|
DO_SMC
|
|
mov r0, #0x1
|
|
ldr r12, =OMAP4_MON_L2X0_CTRL_INDEX @ Enable L2 cache
|
|
DO_SMC
|
|
skip_l2en:
|
|
#endif
|
|
|
|
b cpu_resume @ Jump to generic resume
|
|
ENDPROC(omap4_cpu_resume)
|
|
#endif /* CONFIG_ARCH_OMAP4 */
|
|
|
|
#endif /* defined(CONFIG_SMP) && defined(CONFIG_PM) */
|
|
|
|
ENTRY(omap_do_wfi)
|
|
stmfd sp!, {lr}
|
|
#ifdef CONFIG_OMAP_INTERCONNECT_BARRIER
|
|
/* Drain interconnect write buffers. */
|
|
bl omap_interconnect_sync
|
|
#endif
|
|
|
|
/*
|
|
* Execute an ISB instruction to ensure that all of the
|
|
* CP15 register changes have been committed.
|
|
*/
|
|
isb
|
|
|
|
/*
|
|
* Execute a barrier instruction to ensure that all cache,
|
|
* TLB and branch predictor maintenance operations issued
|
|
* by any CPU in the cluster have completed.
|
|
*/
|
|
dsb
|
|
dmb
|
|
|
|
/*
|
|
* Execute a WFI instruction and wait until the
|
|
* STANDBYWFI output is asserted to indicate that the
|
|
* CPU is in idle and low power state. CPU can specualatively
|
|
* prefetch the instructions so add NOPs after WFI. Sixteen
|
|
* NOPs as per Cortex-A9 pipeline.
|
|
*/
|
|
wfi @ Wait For Interrupt
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
nop
|
|
|
|
ldmfd sp!, {pc}
|
|
ENDPROC(omap_do_wfi)
|