![Andrea Merello](/assets/img/avatar_default.png)
The sa2400 RF code needs to invoke sa2400_write_phy_antenna every time the channel is being switch. This should be done passing the channel number to that function. Incorrectly we were passing the same value that is written on the channel RF register. This may cause problems when operating on ch 14. This patch fixes it. Thanks to Alessandro Di Marco who found this issue! Signed-off-by: Andrea Merello <andreamrl@tiscali.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
203 lines
5.1 KiB
C
203 lines
5.1 KiB
C
|
|
/*
|
|
* Radio tuning for Philips SA2400 on RTL8180
|
|
*
|
|
* Copyright 2007 Andrea Merello <andreamrl@tiscali.it>
|
|
*
|
|
* Code from the BSD driver and the rtl8181 project have been
|
|
* very useful to understand certain things
|
|
*
|
|
* I want to thanks the Authors of such projects and the Ndiswrapper
|
|
* project Authors.
|
|
*
|
|
* A special Big Thanks also is for all people who donated me cards,
|
|
* making possible the creation of the original rtl8180 driver
|
|
* from which this code is derived!
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/delay.h>
|
|
#include <net/mac80211.h>
|
|
|
|
#include "rtl8180.h"
|
|
#include "rtl8180_sa2400.h"
|
|
|
|
static const u32 sa2400_chan[] = {
|
|
0x00096c, /* ch1 */
|
|
0x080970,
|
|
0x100974,
|
|
0x180978,
|
|
0x000980,
|
|
0x080984,
|
|
0x100988,
|
|
0x18098c,
|
|
0x000994,
|
|
0x080998,
|
|
0x10099c,
|
|
0x1809a0,
|
|
0x0009a8,
|
|
0x0009b4, /* ch 14 */
|
|
};
|
|
|
|
static void write_sa2400(struct ieee80211_hw *dev, u8 addr, u32 data)
|
|
{
|
|
struct rtl8180_priv *priv = dev->priv;
|
|
u32 phy_config;
|
|
|
|
/* MAC will bang bits to the sa2400. sw 3-wire is NOT used */
|
|
phy_config = 0xb0000000;
|
|
|
|
phy_config |= ((u32)(addr & 0xf)) << 24;
|
|
phy_config |= data & 0xffffff;
|
|
|
|
rtl818x_iowrite32(priv,
|
|
(__le32 __iomem *) &priv->map->RFPinsOutput, phy_config);
|
|
|
|
msleep(3);
|
|
}
|
|
|
|
static void sa2400_write_phy_antenna(struct ieee80211_hw *dev, short chan)
|
|
{
|
|
struct rtl8180_priv *priv = dev->priv;
|
|
u8 ant = SA2400_ANTENNA;
|
|
|
|
if (priv->rfparam & RF_PARAM_ANTBDEFAULT)
|
|
ant |= BB_ANTENNA_B;
|
|
|
|
if (chan == 14)
|
|
ant |= BB_ANTATTEN_CHAN14;
|
|
|
|
rtl8180_write_phy(dev, 0x10, ant);
|
|
|
|
}
|
|
|
|
static void sa2400_rf_set_channel(struct ieee80211_hw *dev,
|
|
struct ieee80211_conf *conf)
|
|
{
|
|
struct rtl8180_priv *priv = dev->priv;
|
|
int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
|
|
u32 txpw = priv->channels[channel - 1].hw_value & 0xFF;
|
|
u32 chan = sa2400_chan[channel - 1];
|
|
|
|
write_sa2400(dev, 7, txpw);
|
|
|
|
sa2400_write_phy_antenna(dev, channel);
|
|
|
|
write_sa2400(dev, 0, chan);
|
|
write_sa2400(dev, 1, 0xbb50);
|
|
write_sa2400(dev, 2, 0x80);
|
|
write_sa2400(dev, 3, 0);
|
|
}
|
|
|
|
static void sa2400_rf_stop(struct ieee80211_hw *dev)
|
|
{
|
|
write_sa2400(dev, 4, 0);
|
|
}
|
|
|
|
static void sa2400_rf_init(struct ieee80211_hw *dev)
|
|
{
|
|
struct rtl8180_priv *priv = dev->priv;
|
|
u32 anaparam, txconf;
|
|
u8 firdac;
|
|
int analogphy = priv->rfparam & RF_PARAM_ANALOGPHY;
|
|
|
|
anaparam = priv->anaparam;
|
|
anaparam &= ~(1 << ANAPARAM_TXDACOFF_SHIFT);
|
|
anaparam &= ~ANAPARAM_PWR1_MASK;
|
|
anaparam &= ~ANAPARAM_PWR0_MASK;
|
|
|
|
if (analogphy) {
|
|
anaparam |= SA2400_ANA_ANAPARAM_PWR1_ON << ANAPARAM_PWR1_SHIFT;
|
|
firdac = 0;
|
|
} else {
|
|
anaparam |= (SA2400_DIG_ANAPARAM_PWR1_ON << ANAPARAM_PWR1_SHIFT);
|
|
anaparam |= (SA2400_ANAPARAM_PWR0_ON << ANAPARAM_PWR0_SHIFT);
|
|
firdac = 1 << SA2400_REG4_FIRDAC_SHIFT;
|
|
}
|
|
|
|
rtl8180_set_anaparam(priv, anaparam);
|
|
|
|
write_sa2400(dev, 0, sa2400_chan[0]);
|
|
write_sa2400(dev, 1, 0xbb50);
|
|
write_sa2400(dev, 2, 0x80);
|
|
write_sa2400(dev, 3, 0);
|
|
write_sa2400(dev, 4, 0x19340 | firdac);
|
|
write_sa2400(dev, 5, 0x1dfb | (SA2400_MAX_SENS - 54) << 15);
|
|
write_sa2400(dev, 4, 0x19348 | firdac); /* calibrate VCO */
|
|
|
|
if (!analogphy)
|
|
write_sa2400(dev, 4, 0x1938c); /*???*/
|
|
|
|
write_sa2400(dev, 4, 0x19340 | firdac);
|
|
|
|
write_sa2400(dev, 0, sa2400_chan[0]);
|
|
write_sa2400(dev, 1, 0xbb50);
|
|
write_sa2400(dev, 2, 0x80);
|
|
write_sa2400(dev, 3, 0);
|
|
write_sa2400(dev, 4, 0x19344 | firdac); /* calibrate filter */
|
|
|
|
/* new from rtl8180 embedded driver (rtl8181 project) */
|
|
write_sa2400(dev, 6, 0x13ff | (1 << 23)); /* MANRX */
|
|
write_sa2400(dev, 8, 0); /* VCO */
|
|
|
|
if (analogphy) {
|
|
rtl8180_set_anaparam(priv, anaparam |
|
|
(1 << ANAPARAM_TXDACOFF_SHIFT));
|
|
|
|
txconf = rtl818x_ioread32(priv, &priv->map->TX_CONF);
|
|
rtl818x_iowrite32(priv, &priv->map->TX_CONF,
|
|
txconf | RTL818X_TX_CONF_LOOPBACK_CONT);
|
|
|
|
write_sa2400(dev, 4, 0x19341); /* calibrates DC */
|
|
|
|
/* a 5us sleep is required here,
|
|
* we rely on the 3ms delay introduced in write_sa2400 */
|
|
write_sa2400(dev, 4, 0x19345);
|
|
|
|
/* a 20us sleep is required here,
|
|
* we rely on the 3ms delay introduced in write_sa2400 */
|
|
|
|
rtl818x_iowrite32(priv, &priv->map->TX_CONF, txconf);
|
|
|
|
rtl8180_set_anaparam(priv, anaparam);
|
|
}
|
|
/* end new code */
|
|
|
|
write_sa2400(dev, 4, 0x19341 | firdac); /* RTX MODE */
|
|
|
|
/* baseband configuration */
|
|
rtl8180_write_phy(dev, 0, 0x98);
|
|
rtl8180_write_phy(dev, 3, 0x38);
|
|
rtl8180_write_phy(dev, 4, 0xe0);
|
|
rtl8180_write_phy(dev, 5, 0x90);
|
|
rtl8180_write_phy(dev, 6, 0x1a);
|
|
rtl8180_write_phy(dev, 7, 0x64);
|
|
|
|
sa2400_write_phy_antenna(dev, 1);
|
|
|
|
rtl8180_write_phy(dev, 0x11, 0x80);
|
|
|
|
if (rtl818x_ioread8(priv, &priv->map->CONFIG2) &
|
|
RTL818X_CONFIG2_ANTENNA_DIV)
|
|
rtl8180_write_phy(dev, 0x12, 0xc7); /* enable ant diversity */
|
|
else
|
|
rtl8180_write_phy(dev, 0x12, 0x47); /* disable ant diversity */
|
|
|
|
rtl8180_write_phy(dev, 0x13, 0x90 | priv->csthreshold);
|
|
|
|
rtl8180_write_phy(dev, 0x19, 0x0);
|
|
rtl8180_write_phy(dev, 0x1a, 0xa0);
|
|
}
|
|
|
|
const struct rtl818x_rf_ops sa2400_rf_ops = {
|
|
.name = "Philips",
|
|
.init = sa2400_rf_init,
|
|
.stop = sa2400_rf_stop,
|
|
.set_chan = sa2400_rf_set_channel
|
|
};
|