1
0
Fork 0
alistair23-linux/arch/arm/boot/dts
Sascha Hauer b17d5169d5 ARM i.MX53: add dts for the TQ tqma53 module
The tqma53 is an embedded module that has some features on board (e.g. emmc),
but mostly just provides access to them on its interface.
Going along with the imx53.dtsi, the tqma53.dtsi specifies the existing
devices and their pinctrl for this module. All devices that are not on the
module are disabled by default and need to be enabled in a baseboard DT.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-02-10 23:25:44 +08:00
..
testcases of: Add of_property_match_string() to find index into a string list 2012-01-28 10:29:20 -07:00
Makefile ARM: mx25pdk: Add device tree support 2013-02-10 23:25:42 +08:00
aks-cdu.dts ARM: at91: Add support for board aks-cdu 2012-07-09 20:45:31 +02:00
am33xx.dtsi Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2012-12-12 18:07:07 -08:00
am335x-bone.dts Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2012-12-12 18:07:07 -08:00
am335x-evm.dts Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next 2012-12-12 18:07:07 -08:00
am335x-evmsk.dts ARM: dts: AM33XX: Add push-buttons device tree data to am335x-evmsk 2012-11-06 15:45:53 +01:00
am3517-evm.dts arm/dts: Add support for TI AM3517/05 EVM board 2012-07-02 01:27:44 -07:00
am3517_mt_ventoux.dts arm/dts: mt_ventoux: very basic support for TeeJet Mt.Ventoux board 2012-03-05 13:48:03 -08:00
animeo_ip.dts ARM: at91: Animeo IP: add mmc support 2012-11-20 01:10:28 +08:00
armada-370-db.dts arm: mvebu: Fix memory size for Armada 370 DB 2013-01-10 19:16:51 +00:00
armada-370-mirabox.dts arm: mvebu: remove 'clock-frequency' properties from Armada 370/XP Ethernet nodes 2012-11-20 23:15:56 +01:00
armada-370-xp.dtsi arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driver 2013-01-06 17:41:14 +00:00
armada-370.dtsi arm: mvebu: add Aurora L2 Cache Controller to the DT 2012-11-27 15:35:34 +00:00
armada-xp-db.dts Marvell Ethernet DT update for clk support 2012-11-20 23:38:00 +01:00
armada-xp-mv78230.dtsi arm: mvebu: use global interrupts for GPIOs on Armada XP 2013-01-08 12:35:46 +00:00
armada-xp-mv78260.dtsi arm: mvebu: use global interrupts for GPIOs on Armada XP 2013-01-08 12:35:46 +00:00
armada-xp-mv78460.dtsi arm: mvebu: use global interrupts for GPIOs on Armada XP 2013-01-08 12:35:46 +00:00
armada-xp-openblocks-ax3-4.dts ARM: mvebu: Add SATA support for OpenBlocks AX3-4 2012-11-21 23:20:35 +01:00
armada-xp.dtsi arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces 2013-01-06 17:53:19 +00:00
at91rm9200.dtsi ARM: at91: fix gpios on i2c-gpio for RM9200 DT 2013-01-23 10:31:07 +01:00
at91rm9200ek.dts ARM: AT91: Add AT91RM9200EK board device tree 2012-11-19 07:51:10 +08:00
at91sam9g15.dtsi arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g15ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g20.dtsi ARM: dts: add twi nodes for atmel SoCs 2012-09-12 14:49:16 +02:00
at91sam9g20ek.dts ARM: at91: add at91sam9g20ek boards dt support 2012-04-20 23:17:05 +08:00
at91sam9g20ek_2mmc.dts ARM: at91: dt: add mmc pinctrl for Atmel reference boards 2012-11-20 01:10:27 +08:00
at91sam9g20ek_common.dtsi Sound updates for 3.8-rc1 2012-12-13 11:51:23 -08:00
at91sam9g25.dtsi arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g25ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g35.dtsi arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g35ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9g45.dtsi ARM: at91/dts: add pinctrl support for SSC peripheral 2013-01-12 00:00:23 +00:00
at91sam9m10g45ek.dts ARM: at91: dt: add mmc pinctrl for Atmel reference boards 2012-11-20 01:10:27 +08:00
at91sam9n12.dtsi ARM: at91/dts: add pinctrl support for SSC peripheral 2013-01-12 00:00:23 +00:00
at91sam9n12ek.dts ARM: at91: dt: add mmc pinctrl for Atmel reference boards 2012-11-20 01:10:27 +08:00
at91sam9x5.dtsi ARM: at91/dts: correct comment in at91sam9x5.dtsi for mii 2013-01-23 10:40:51 +01:00
at91sam9x5cm.dtsi ARM: at91: dt: remove unit-address part for memory nodes 2012-04-04 18:35:52 +02:00
at91sam9x5ek.dtsi ARM: at91: dt: add mmc pinctrl for Atmel reference boards 2012-11-20 01:10:27 +08:00
at91sam9x25.dtsi ARM: at91sam9: add macb pinctrl support 2012-11-19 06:54:25 +08:00
at91sam9x25ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9x35.dtsi arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9x35ek.dts arm: at91: dt: at91sam9 add serial pinctrl support 2012-10-13 09:21:44 +08:00
at91sam9260.dtsi ARM: at91/dts: add pinctrl support for SSC peripheral 2013-01-12 00:00:23 +00:00
at91sam9263.dtsi ARM: at91/dts: add pinctrl support for SSC peripheral 2013-01-12 00:00:23 +00:00
at91sam9263ek.dts ARM: at91: dt: add mmc pinctrl for Atmel reference boards 2012-11-20 01:10:27 +08:00
bcm2835-rpi-b.dts ARM: bcm2835: enable GPIO/pinctrl 2012-10-25 20:42:51 -06:00
bcm2835.dtsi ARM: bcm2835: enable GPIO/pinctrl 2012-10-25 20:42:51 -06:00
bcm11351-brt.dts Add support for generic BCM SoC chipsets 2012-11-19 22:39:07 -08:00
bcm11351.dtsi Add support for generic BCM SoC chipsets 2012-11-19 22:39:07 -08:00
ccu9540.dts ARM: ux500: List DT compatibility using platform names rather than by board 2012-11-01 13:02:25 +01:00
cros5250-common.dtsi ARM: dts: correct the dw-mshc timing properties as per binding 2013-01-16 15:45:52 -08:00
da850-enbw-cmc.dts ARM: davinci: add support for am1808 based EnBW CMC board 2012-10-29 15:43:43 +05:30
da850-evm.dts ARM: davinci: da850 evm: add DT data 2012-10-29 15:43:13 +05:30
da850.dtsi ARM: davinci: da850: add SoC DT data 2012-10-29 15:42:21 +05:30
dbx5x0.dtsi ARM: ux500: add pinctrl address resources 2012-12-26 01:59:54 +01:00
dove-cm-a510.dts ARM: dove: add device tree descriptors 2012-09-21 17:07:24 +00:00
dove-cubox.dts ARM: Dove: add Cubox sdhci card detect gpio 2013-01-10 02:14:08 +00:00
dove-dove-db.dts ARM: dove: add device tree descriptors 2012-09-21 17:07:24 +00:00
dove.dtsi ARM: Dove: Add pinctrl clock to DT 2013-01-07 16:18:57 +00:00
ea3250.dts ARM: LPC32xx: Extend dts for EA3250 board 2012-09-06 11:40:48 +02:00
ecx-2000.dts ARM: dts: add device_type prop to cpu nodes on Calxeda platforms 2013-01-07 21:08:23 -08:00
ecx-common.dtsi ARM: dts: Add Calxeda ECX-2000 support 2012-10-31 13:46:17 -05:00
elpida_ecb240abacn.dtsi ARM: dts: EMIF and LPDDR2 device tree data for OMAP4 boards 2012-09-07 19:18:40 +02:00
emev2-kzm9d.dts mach-shmobile: Use DT_MACHINE for KZM9D V3 2012-05-18 00:14:03 +02:00
emev2.dtsi mach-shmobile: Emma Mobile EV2 DT support V3 2012-05-18 00:14:03 +02:00
ethernut5.dts Ethernut 5 board support 2012-04-27 23:23:22 +08:00
evk-pro3.dts ARM: at91/dts: evk-pro3: enable watchdog 2012-11-16 15:48:48 +01:00
exynos4.dtsi ARM: arm-soc: device tree conversions and enablement 2012-12-13 10:39:26 -08:00
exynos4x12-pinctrl.dtsi ARM: dts: Use drive strength 3 for SD pins for exynos4 2012-11-22 00:39:01 +09:00
exynos4x12.dtsi ARM: dts: Add nodes for pin controllers for exynos4x12 2012-11-19 10:03:07 +09:00
exynos4210-origen.dts ARM: dts: Add vmmc fixed voltage regulator for exynos4210-origen 2012-11-22 00:38:56 +09:00
exynos4210-pinctrl.dtsi ARM: dts: Use drive strength 3 for SD pins for exynos4 2012-11-22 00:39:01 +09:00
exynos4210-smdkv310.dts ARM: dts: use uart port1 for console on exynos4210-smdkv310 2012-12-28 09:35:35 -08:00
exynos4210-trats.dts ARM: dts: Remove broken-voltage property from sdhci node for exynos4210-trats 2012-11-20 20:17:20 +09:00
exynos4210.dtsi ARM: dts: Set up power domains for exynos4 2012-11-22 00:39:00 +09:00
exynos4212.dtsi ARM: dts: Add support for EXYNOS4X12 SoCs 2012-11-07 08:52:25 +09:00
exynos4412-smdk4412.dts ARM: dts: add board dts file for EXYNOS4412 based SMDK board 2012-11-07 09:12:10 +09:00
exynos4412.dtsi ARM: dts: Add support for EXYNOS4X12 SoCs 2012-11-07 08:52:25 +09:00
exynos5250-smdk5250.dts ARM: dts: correct the dw-mshc timing properties as per binding 2013-01-16 15:45:52 -08:00
exynos5250-snow.dts ARM: dts: Add board dts file for Snow board (ARM Chromebook) 2012-11-21 13:32:21 +09:00
exynos5250.dtsi ARM: EXYNOS: Revise HDMI resource size 2012-12-27 10:35:51 -08:00
exynos5440-ssdk5440.dts ARM: dts: use uart port0 for console on exynos5440-ssdk5440 2012-12-28 09:35:14 -08:00
exynos5440.dtsi ARM: dts: Add pin controller node for Samsung EXYNOS5440 SoC 2012-11-22 13:50:14 +09:00
ge863-pro3.dtsi ARM: at91: add support for Telit EVK-PRO3 with Telit GE863-PRO3 2012-07-09 20:22:00 +02:00
highbank.dts ARM: dts: fix highbank cpu mpidr values 2013-01-07 21:08:23 -08:00
href.dtsi ARM: ux500: Add support for gpio-keys and Proximity Sensor for HREF 2012-11-01 12:59:32 +01:00
hrefprev60.dts ARM: ux500: Move board specific GPIO info out to subordinate DTS files 2012-11-27 10:58:27 +00:00
hrefv60plus.dts ARM: ux500: Add SDI (MMC) support to the HREF Device Tree 2012-11-20 16:10:43 +00:00
imx6q-arm2.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx6q-sabreauto.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx6q-sabrelite.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx6q-sabresd.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx6q.dtsi ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx23-evk.dts ARM: mxs: Let mmc0 pin detect be generic 2012-08-23 10:01:30 +08:00
imx23-olinuxino.dts ARM: dts: imx23-olinuxino: Fix IOMUX settings 2012-12-25 22:17:59 +08:00
imx23-stmp378x_devb.dts ARM: mxs: Rename 'hog-gpios' 2012-08-23 10:01:11 +08:00
imx23.dtsi They are a few mxs dts updates coming a little bit late. I'm sending 2012-11-25 23:26:53 -08:00
imx25-karo-tx25.dts ARM: dts: imx25-karo-tx25: Put status entry in the end 2013-02-10 23:25:43 +08:00
imx25-pdk.dts ARM: mx25pdk: Add device tree support 2013-02-10 23:25:42 +08:00
imx25.dtsi ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx27-apf27.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx27-pdk.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx27-phytec-phycore.dts ARM: dts: mx27: Fix the AIPI bus for FEC 2012-12-17 10:49:41 +01:00
imx27.dtsi ARM: dts: mx27: Fix the AIPI bus for FEC 2012-12-17 10:49:41 +01:00
imx28-apf28.dts ARM: mxs: Add support for the Armadeus Systems APF28 module 2012-10-19 16:45:20 +08:00
imx28-apf28dev.dts ARM: mxs: apf28dev: Add I2C and SPI support 2012-11-12 10:07:43 +08:00
imx28-apx4devkit.dts ARM: mxs: Rename 'hog-gpios' 2012-08-23 10:01:11 +08:00
imx28-cfa10036.dts ARM: dts: mxs: add oled support for the cfa-10036 2012-11-22 09:03:40 +08:00
imx28-cfa10049.dts Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux 2012-12-18 16:51:10 -08:00
imx28-evk.dts ARM: dts: imx28-evk: Use pinctrl for gpio-led 2012-10-15 10:51:48 +08:00
imx28-m28evk.dts ARM: dts: m28evk: Fix MMC WP pin being inverted 2012-09-05 11:53:11 +08:00
imx28-sps1.dts ARM: mxs: Add SchulerControl SPS1 DTS file 2012-11-20 22:09:05 +08:00
imx28-tx28.dts ARM: mxs: Rename 'hog-gpios' 2012-08-23 10:01:11 +08:00
imx28.dtsi ARM: arm-soc: device tree conversions and enablement 2012-12-13 10:39:26 -08:00
imx31-bug.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx31.dtsi ARM i.MX31: Add devicetree support 2012-07-10 19:23:03 +02:00
imx51-babbage.dts ARM i.MX51 babbage: Add keypad support 2013-02-10 23:25:43 +08:00
imx51.dtsi ARM: dts: imx: Add imx51 KPP entry 2013-02-10 23:25:43 +08:00
imx53-ard.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx53-evk.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx53-qsb.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx53-smd.dts ARM: dts: imx: use nodes label in board dts 2013-02-10 23:25:42 +08:00
imx53-tqma53.dtsi ARM i.MX53: add dts for the TQ tqma53 module 2013-02-10 23:25:44 +08:00
imx53.dtsi ARM: dts: imx53: pinctrl update 2013-02-10 23:25:44 +08:00
integrator.dtsi ARM: 7519/1: integrator: convert platform devices to Device Tree 2012-09-17 23:20:23 +01:00
integratorap.dts ARM: integrator: hook the AP into the SoC bus 2012-11-16 22:25:50 +01:00
integratorcp.dts ARM: integrator: hook the CP into the SoC bus 2012-11-16 22:26:07 +01:00
kirkwood-98dx4122.dtsi ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl 2012-11-24 02:58:43 +00:00
kirkwood-6281.dtsi ARM: kirkwood: Convert mplcec4 board to pinctrl 2012-11-24 02:58:52 +00:00
kirkwood-6282.dtsi ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers 2013-01-06 17:53:04 +00:00
kirkwood-dns320.dts ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi 2012-07-27 16:49:53 +02:00
kirkwood-dns325.dts ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi 2012-07-27 16:49:53 +02:00
kirkwood-dnskw.dtsi ARM: Kirkwood: Convert dnskw to pinctrl 2012-11-24 02:57:56 +00:00
kirkwood-dockstar.dts ARM: Kirkwood: Convert dockstar to pinctrl. 2012-11-24 02:58:05 +00:00
kirkwood-dreamplug.dts ARM: Kirkwood: Convert dreamplug to pinctrl. 2012-11-24 02:58:11 +00:00
kirkwood-goflexnet.dts ARM: Kirkwood: Convert GoFlex Net to pinctrl. 2012-11-24 02:58:18 +00:00
kirkwood-ib62x0.dts ARM: Kirkwood: Convert ib62x0 to pinctrl. 2012-11-24 02:58:25 +00:00
kirkwood-iconnect.dts ARM: Kirkwood: Convert iConnect to pinctrl. 2012-11-24 02:57:47 +00:00
kirkwood-iomega_ix2_200.dts ARM: Kirkwood: Convert IX2-200 to pinctrl. 2012-11-24 02:58:36 +00:00
kirkwood-is2.dts ARM: kirkwood: DT board setup for Network Space v2 and parents 2012-11-21 20:58:35 +00:00
kirkwood-km_kirkwood.dts ARM: Kirkwood: Convert km_kirkwood to pinctrl 2012-11-24 02:58:48 +00:00
kirkwood-lschlv2.dts ARM: Kirkwood: Replace mrvl with marvell 2012-07-27 16:50:57 +02:00
kirkwood-lsxhl.dts ARM: Kirkwood: Replace mrvl with marvell 2012-07-27 16:50:57 +02:00
kirkwood-lsxl.dtsi ARM: Kirkwood: Convert lsxl boards to pinctrl. 2012-11-24 02:58:30 +00:00
kirkwood-mplcec4.dts ARM: kirkwood: Convert mplcec4 board to pinctrl 2012-11-24 02:58:52 +00:00
kirkwood-ns2-common.dtsi ARM: Kirkwood: fix ns2 gpios by converting to pinctrl 2013-01-10 01:25:56 +00:00
kirkwood-ns2.dts ARM: kirkwood: DT board setup for Network Space v2 and parents 2012-11-21 20:58:35 +00:00
kirkwood-ns2lite.dts ARM: kirkwood: DT board setup for Network Space Lite v2 2012-11-21 20:58:43 +00:00
kirkwood-ns2max.dts ARM: kirkwood: DT board setup for Network Space v2 and parents 2012-11-21 20:58:35 +00:00
kirkwood-ns2mini.dts ARM: kirkwood: DT board setup for Network Space Mini v2 2012-11-21 20:58:49 +00:00
kirkwood-nsa310.dts arm: kirkwood: add support for ZyXEL NSA310 2012-11-21 20:59:30 +00:00
kirkwood-openblocks_a6.dts ARM: Kirkwood: Add support LED of OpenBlocks A6 2012-11-24 02:59:12 +00:00
kirkwood-topkick.dts ARM: Kirkwood: Use fixed-regulator instead of board gpio call 2013-01-06 17:53:10 +00:00
kirkwood-ts219-6281.dts ARM: Kirkwood: Convert TS219 to pinctrl. 2012-11-24 02:57:43 +00:00
kirkwood-ts219-6282.dts ARM: Kirkwood: Convert TS219 to pinctrl. 2012-11-24 02:57:43 +00:00
kirkwood-ts219.dtsi ARM: Kirkwood: Replace mrvl with marvell 2012-07-27 16:50:57 +02:00
kirkwood.dtsi ARM: kirkwood: fix missing #interrupt-cells property 2013-01-23 01:10:48 +00:00
kizbox.dts ARM: at91/dts: add macb mii pinctrl config for kizbox 2013-01-23 10:34:38 +01:00
lpc32xx.dtsi ARM: LPC32xx: Add the motor PWM to base dts file 2012-11-14 15:41:18 +01:00
mmp2-brownstone.dts ARM: dts: update memory size on brownstone 2012-06-05 16:42:38 +08:00
mmp2.dtsi ARM: mmp: enable tauros2 cache in mmp2 dt 2012-08-16 16:17:10 +08:00
msm8660-surf.dts ARM: msm: Move 8660 to DT timer 2012-09-13 11:14:54 -07:00
msm8960-cdp.dts ARM: msm: Add DT support for 8960 2012-09-13 11:16:47 -07:00
omap2.dtsi ARM: dts: OMAP: Add timer nodes 2012-10-29 16:56:32 +01:00
omap3-beagle-xm.dts ARM: dts: Add omap3-beagle.dts 2012-10-29 16:56:24 +01:00
omap3-beagle.dts ARM: dts: Add omap3-beagle.dts 2012-10-29 16:56:24 +01:00
omap3-evm.dts ARM: dts: omap3: Add gpio-twl4030 properties for BeagleBoard and omap3-EVM 2012-09-07 19:22:44 +02:00
omap3-overo.dtsi ARM: dts: omap3-overo: Add support for the blue LED 2012-09-10 15:44:45 +02:00
omap3-tobi.dts ARM: dts: OMAP3: Add support for Gumstix Overo with Tobi expansion board 2012-09-10 12:07:22 +02:00
omap3.dtsi ARM: dts: OMAP: Add counter-32k nodes 2012-10-29 16:56:33 +01:00
omap4-panda-a4.dts ARM: dts: omap4-panda: Add pinmux configuration for HDMI 2012-11-07 11:50:28 +01:00
omap4-panda-es.dts ARM: dts: omap4-panda: Add pinmux configuration for HDMI 2012-11-07 11:50:28 +01:00
omap4-panda.dts ARM: dts: omap4-panda: Add pinmux configuration for HDMI 2012-11-07 11:50:28 +01:00
omap4-sdp-es23plus.dts ARM: dts: omap4-sdp: Add pinmux configuration for HDMI 2012-11-07 11:50:29 +01:00
omap4-sdp.dts ARM: dts: omap4-sdp: Add pinmux configuration for HDMI 2012-11-07 11:50:29 +01:00
omap4-var-som.dts ARM: dts: OMAP: Rename pandaES and var_som for consistency 2012-10-29 16:56:35 +01:00
omap4.dtsi ARM: dts: OMAP4: Update timer addresses 2012-11-01 17:03:31 +01:00
omap5-evm.dts ARM: dts: omap5-evm: LPDDR2 memory device details for EVM 2012-11-05 18:38:27 +01:00
omap5.dtsi ARM: dts: omap5: EMIF device tree data for OMAP5 boards 2012-11-05 18:38:03 +01:00
omap36xx.dtsi arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm 2012-09-10 10:34:51 -07:00
omap2420-h4.dts ARM: dts: OMAP2420: Correct H4 board memory size 2012-12-14 14:49:53 -08:00
omap2420.dtsi ARM: dts: OMAP: Add counter-32k nodes 2012-10-29 16:56:33 +01:00
omap2430.dtsi ARM: dts: OMAP: Add counter-32k nodes 2012-10-29 16:56:33 +01:00
orion5x-lacie-ethernet-disk-mini-v2.dts arm: orion5x: convert 'LaCie Ethernet Disk mini v2' to Device Tree 2012-11-21 21:00:51 +00:00
orion5x.dtsi arm: orion5x: basic Device Tree support 2012-11-21 21:00:45 +00:00
phy3250.dts ARM: LPC32xx: LED fix in PHY3250 DTS file 2012-09-25 10:11:41 +02:00
picoxcell-pc3x2.dtsi picoxcell: add the DTS for pc3x2 and pc3x3 devices 2011-09-26 16:12:06 +01:00
picoxcell-pc3x3.dtsi picoxcell: add the DTS for pc3x2 and pc3x3 devices 2011-09-26 16:12:06 +01:00
picoxcell-pc7302-pc3x2.dts picoxcell: add the DTS for the PC7302 board 2011-09-26 16:12:07 +01:00
picoxcell-pc7302-pc3x3.dts picoxcell: add the DTS for the PC7302 board 2011-09-26 16:12:07 +01:00
pm9g45.dts ARM: at91: pm9g45: add mmc support 2012-11-20 01:10:28 +08:00
prima2-evb.dts pinctrl: sirf: add DT-binding pinmux mapping support 2012-09-05 14:48:10 +08:00
prima2.dtsi pinctrl: sirf: add DT-binding pinmux mapping support 2012-09-05 14:48:10 +08:00
pxa2xx.dtsi ARM: pxa: add .dtsi files 2012-08-16 16:15:25 +08:00
pxa3xx.dtsi ARM: pxa: add .dtsi files 2012-08-16 16:15:25 +08:00
pxa27x.dtsi ARM: pxa: add .dtsi files 2012-08-16 16:15:25 +08:00
pxa168-aspenite.dts ARM: dts: append DTS file of pxa168 2012-03-07 09:32:40 +08:00
pxa168.dtsi ARM: dts: refresh dts file for arch mmp 2012-05-05 16:39:29 +08:00
pxa910-dkb.dts ARM: dts: Enable 88pm860x pmic 2012-10-02 11:43:17 +02:00
pxa910.dtsi MFD bits for the 3.7 merge window. 2012-10-05 12:01:30 +09:00
r8a7740-armadillo800eva.dts ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva 2012-05-14 23:23:42 +02:00
r8a7740.dtsi ARM: mach-shmobile: r8a7740 generic board support via DT 2012-07-06 21:03:35 +02:00
samsung_k3pe0e000b.dtsi ARM: dts: omap5-evm: LPDDR2 memory device details for EVM 2012-11-05 18:38:27 +01:00
sh73a0-kzm9g.dts ARM: shmobile: fix smp build 2012-05-16 22:16:30 +02:00
sh7372-mackerel.dts ARM: mach-shmobile: Use DT_MACHINE for mackerel 2012-10-30 15:25:53 +08:00
sh7372.dtsi ARM: mach-shmobile: sh7372 generic board support via DT V2 2012-04-11 12:19:31 +02:00
skeleton.dtsi
…
snowball.dts ARM: arm-soc: device tree conversions and enablement 2012-12-13 10:39:26 -08:00
socfpga.dtsi ARM: socfpga: Enable SMP for socfpga 2012-10-26 14:59:39 +02:00
socfpga_cyclone5.dts ARM: socfpga: initial support for Altera's SOCFPGA platform 2012-07-19 10:39:00 +02:00
spear3xx.dtsi ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear13xx.dtsi MTD pull for 3.8 2012-12-19 12:47:41 -08:00
spear300-evb.dts ARM: SPEAr: DT: add uart state to fix warning 2012-11-26 15:53:52 +05:30
spear300.dtsi MTD pull for 3.8 2012-12-19 12:47:41 -08:00
spear310-evb.dts ARM: SPEAr: DT: add uart state to fix warning 2012-11-26 15:53:52 +05:30
spear310.dtsi MTD pull for 3.8 2012-12-19 12:47:41 -08:00
spear320-evb.dts ARM: SPEAr: DT: add uart state to fix warning 2012-11-26 15:53:52 +05:30
spear320-hmi.dts ARM: SPEAr320: DT: Add SPEAr 320 HMI board support 2012-11-26 16:55:33 +05:30
spear320.dtsi MTD pull for 3.8 2012-12-19 12:47:41 -08:00
spear600-evb.dts ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear600.dtsi MTD pull for 3.8 2012-12-19 12:47:41 -08:00
spear1310-evb.dts ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear1310.dtsi ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear1340-evb.dts ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
spear1340.dtsi ARM: SPEAr: DT: Update device nodes 2012-11-26 16:55:28 +05:30
stuib.dtsi ARM: ux500: Change the type of interrupt to something compatible 2012-11-01 13:02:26 +01:00
sun4i-a10-cubieboard.dts ARM: sunxi: rename device tree source files 2012-12-20 09:42:37 -08:00
sun4i-a10.dtsi ARM: sunxi: rename device tree source files 2012-12-20 09:42:37 -08:00
sun5i-a13-olinuxino.dts ARM: sunxi: rename device tree source files 2012-12-20 09:42:37 -08:00
sun5i-a13.dtsi ARM: sunxi: rename device tree source files 2012-12-20 09:42:37 -08:00
sunxi.dtsi ARM: sunxi: Use the Synosys APB UART instead of ns8250 2013-01-16 19:13:18 +01:00
tegra20-harmony.dts ARM: tegra: harmony: enable HDMI port 2012-11-16 09:14:26 -07:00
tegra20-medcom-wide.dts ARM: tegra: Add Avionic Design Medcom-Wide support 2012-09-20 09:34:00 -06:00
tegra20-paz00.dts ARM: tegra: update *.dts for regulator-compatible deprecation 2012-11-05 11:36:04 -07:00
tegra20-plutux.dts ARM: tegra: plutux: Enable HDMI output 2012-11-16 09:17:08 -07:00
tegra20-seaboard.dts ARM: arm-soc: device tree conversions and enablement 2012-12-13 10:39:26 -08:00
tegra20-tamonten.dtsi ARM: tegra: tamonten: Add host1x support 2012-11-16 09:17:08 -07:00
tegra20-tec.dts ARM: tegra: tec: Enable HDMI output 2012-11-16 09:17:09 -07:00
tegra20-trimslice.dts ARM: tegra: trimslice: enable HDMI port 2012-11-16 09:14:40 -07:00
tegra20-ventana.dts ARM: tegra: ventana: Add NCT1008 temperature sensor 2012-11-15 15:07:30 -07:00
tegra20-whistler.dts ARM: tegra: whistler: enable HDMI port 2012-11-16 10:56:38 -07:00
tegra20.dtsi ARM: tegra: add TWD to device tree 2012-11-16 12:22:16 -07:00
tegra30-cardhu-a02.dts ARM: dt: t30 cardhu: set pinmux and power for wlan 2012-11-15 15:07:28 -07:00
tegra30-cardhu-a04.dts ARM: dt: t30 cardhu: set pinmux and power for wlan 2012-11-15 15:07:28 -07:00
tegra30-cardhu.dtsi ARM: tegra: dts: cardhu: enable SLINK4 2012-11-15 15:07:29 -07:00
tegra30.dtsi ARM: arm-soc: multiplatform conversion patches 2012-12-13 10:57:16 -08:00
tny_a9g20.dts arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support 2012-04-20 23:17:00 +08:00
tny_a9260.dts arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support 2012-04-20 23:17:00 +08:00
tny_a9260_common.dtsi arm: at91: add Calao TNY-A9260 and TNY-A9G20 board support 2012-04-20 23:17:00 +08:00
tny_a9263.dts ARM: at91: DT: add Calao TNY A9263 board support 2012-04-20 23:17:30 +08:00
tps65217.dtsi arm/dts: regulator: Add tps65217 device tree data 2012-08-30 13:59:17 -07:00
tps65910.dtsi arm/dts: regulator: Add tps65910 device tree data 2012-08-30 13:57:53 -07:00
twl4030.dtsi watchdog: twl4030_wdt: add DT support 2013-01-02 12:07:05 +01:00
twl6030.dtsi ARM: dts: Add twl6030-usb data 2012-10-29 16:56:29 +01:00
u9540.dts ARM: ux500: Enable all MMC devices on the u9540 when booting with DT 2012-11-20 16:10:46 +00:00
usb_a9g20-dab-mmx.dtsi ARM: at91/dt: add Calao DAB-MMX daugther board support for USB-A9G20 2012-03-15 23:29:54 +08:00
usb_a9g20.dts ARM: at91: Calao USB A926x factorize common binding in usb_a9260_common 2012-04-20 23:17:11 +08:00
usb_a9260.dts ARM: at91: DT: add Calao USB A9260 DT support 2012-04-20 23:17:15 +08:00
usb_a9260_common.dtsi ARM: at91: Calao USB A926x factorize common binding in usb_a9260_common 2012-04-20 23:17:11 +08:00
usb_a9263.dts ARM: at91: DT: add Calao USB A9263 board support 2012-04-20 23:17:27 +08:00
versatile-ab.dts ARM: 7390/1: dts: versatile-pb/ab fix MMC IRQs 2012-04-23 15:46:15 +01:00
versatile-pb.dts ARM: 7390/1: dts: versatile-pb/ab fix MMC IRQs 2012-04-23 15:46:15 +01:00
vexpress-v2m-rs1.dtsi ARM: vexpress: Remove motherboard dependencies in the DTS files 2012-11-05 17:09:52 +00:00
vexpress-v2m.dtsi ARM: vexpress: Remove motherboard dependencies in the DTS files 2012-11-05 17:09:52 +00:00
vexpress-v2p-ca5s.dts ARM: vexpress: Remove motherboard dependencies in the DTS files 2012-11-05 17:09:52 +00:00
vexpress-v2p-ca9.dts ARM: vexpress: Remove motherboard dependencies in the DTS files 2012-11-05 17:09:52 +00:00
vexpress-v2p-ca15-tc1.dts ARM: vexpress: Remove motherboard dependencies in the DTS files 2012-11-05 17:09:52 +00:00
vexpress-v2p-ca15_a7.dts ARM: vexpress: Enable A7 cores in V2P-CA15_A7's Device Tree 2013-01-24 12:19:23 +00:00
vt8500-bv07.dts arm: vt8500: Add device tree files for VIA/Wondermedia SoC's 2012-09-21 19:23:54 +12:00
vt8500.dtsi arm: vt8500: Add device tree files for VIA/Wondermedia SoC's 2012-09-21 19:23:54 +12:00
wm8505-ref.dts arm: vt8500: Add device tree files for VIA/Wondermedia SoC's 2012-09-21 19:23:54 +12:00
wm8505.dtsi dtb: fix interrupt assignment for ehci/uhci on wm8505 2012-10-15 21:12:52 -07:00
wm8650-mid.dts arm: vt8500: Add device tree files for VIA/Wondermedia SoC's 2012-09-21 19:23:54 +12:00
wm8650.dtsi arm: vt8500: Add device tree files for VIA/Wondermedia SoC's 2012-09-21 19:23:54 +12:00
xenvm-4.2.dts arm: introduce a DTS for Xen unprivileged virtual machines 2012-09-24 16:40:52 +00:00
zynq-7000.dtsi ARM: zynq: add clk binding support to the ttc 2012-11-14 16:10:42 +01:00
zynq-zc702.dts ARM: zynq: add clk binding support to the ttc 2012-11-14 16:10:42 +01:00