alistair23-linux/drivers/pwm/pwm-lpss.c
Mika Westerberg 37670676a1 pwm: lpss: Rework the sequence of programming PWM_SW_UPDATE
Setting of PWM_SW_UPDATE is bit different in Intel Broxton compared to the
previous generation SoCs. Previously it was OK to set the bit many times
(from userspace via sysfs for example) before the PWM is actually enabled.

Starting from Intel Broxton it seems that we must set PWM_SW_UPDATE only
once before the PWM is enabled. Otherwise it is possible that the PWM does
not start properly.

Change the sequence of how PWM_SW_UPDATE is programmed so that we only set
it in pwm_lpss_config() when the PWM is already enabled. The initial
setting of PWM_SW_UPDATE will be done when PWM gets enabled. This should
make the driver work with the previous generation Intel SoCs and Broxton.

Add also small delay after the bit is set to let the hardware propagate it
properly.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2015-12-16 16:52:09 +01:00

207 lines
4.9 KiB
C

/*
* Intel Low Power Subsystem PWM controller driver
*
* Copyright (C) 2014, Intel Corporation
* Author: Mika Westerberg <mika.westerberg@linux.intel.com>
* Author: Chew Kean Ho <kean.ho.chew@intel.com>
* Author: Chang Rebecca Swee Fun <rebecca.swee.fun.chang@intel.com>
* Author: Chew Chiau Ee <chiau.ee.chew@intel.com>
* Author: Alan Cox <alan@linux.intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/time.h>
#include "pwm-lpss.h"
#define PWM 0x00000000
#define PWM_ENABLE BIT(31)
#define PWM_SW_UPDATE BIT(30)
#define PWM_BASE_UNIT_SHIFT 8
#define PWM_ON_TIME_DIV_MASK 0x000000ff
#define PWM_DIVISION_CORRECTION 0x2
/* Size of each PWM register space if multiple */
#define PWM_SIZE 0x400
struct pwm_lpss_chip {
struct pwm_chip chip;
void __iomem *regs;
const struct pwm_lpss_boardinfo *info;
};
/* BayTrail */
const struct pwm_lpss_boardinfo pwm_lpss_byt_info = {
.clk_rate = 25000000,
.npwm = 1,
.base_unit_bits = 16,
};
EXPORT_SYMBOL_GPL(pwm_lpss_byt_info);
/* Braswell */
const struct pwm_lpss_boardinfo pwm_lpss_bsw_info = {
.clk_rate = 19200000,
.npwm = 1,
.base_unit_bits = 16,
};
EXPORT_SYMBOL_GPL(pwm_lpss_bsw_info);
/* Broxton */
const struct pwm_lpss_boardinfo pwm_lpss_bxt_info = {
.clk_rate = 19200000,
.npwm = 4,
.base_unit_bits = 22,
};
EXPORT_SYMBOL_GPL(pwm_lpss_bxt_info);
static inline struct pwm_lpss_chip *to_lpwm(struct pwm_chip *chip)
{
return container_of(chip, struct pwm_lpss_chip, chip);
}
static inline u32 pwm_lpss_read(const struct pwm_device *pwm)
{
struct pwm_lpss_chip *lpwm = to_lpwm(pwm->chip);
return readl(lpwm->regs + pwm->hwpwm * PWM_SIZE + PWM);
}
static inline void pwm_lpss_write(const struct pwm_device *pwm, u32 value)
{
struct pwm_lpss_chip *lpwm = to_lpwm(pwm->chip);
writel(value, lpwm->regs + pwm->hwpwm * PWM_SIZE + PWM);
}
static void pwm_lpss_update(struct pwm_device *pwm)
{
pwm_lpss_write(pwm, pwm_lpss_read(pwm) | PWM_SW_UPDATE);
/* Give it some time to propagate */
usleep_range(10, 50);
}
static int pwm_lpss_config(struct pwm_chip *chip, struct pwm_device *pwm,
int duty_ns, int period_ns)
{
struct pwm_lpss_chip *lpwm = to_lpwm(chip);
u8 on_time_div;
unsigned long c, base_unit_range;
unsigned long long base_unit, freq = NSEC_PER_SEC;
u32 ctrl;
do_div(freq, period_ns);
/*
* The equation is:
* base_unit = ((freq / c) * base_unit_range) + correction
*/
base_unit_range = BIT(lpwm->info->base_unit_bits);
base_unit = freq * base_unit_range;
c = lpwm->info->clk_rate;
if (!c)
return -EINVAL;
do_div(base_unit, c);
base_unit += PWM_DIVISION_CORRECTION;
if (duty_ns <= 0)
duty_ns = 1;
on_time_div = 255 - (255 * duty_ns / period_ns);
pm_runtime_get_sync(chip->dev);
ctrl = pwm_lpss_read(pwm);
ctrl &= ~PWM_ON_TIME_DIV_MASK;
ctrl &= ~((base_unit_range - 1) << PWM_BASE_UNIT_SHIFT);
base_unit &= (base_unit_range - 1);
ctrl |= (u32) base_unit << PWM_BASE_UNIT_SHIFT;
ctrl |= on_time_div;
pwm_lpss_write(pwm, ctrl);
/*
* If the PWM is already enabled we need to notify the hardware
* about the change by setting PWM_SW_UPDATE.
*/
if (pwm_is_enabled(pwm))
pwm_lpss_update(pwm);
pm_runtime_put(chip->dev);
return 0;
}
static int pwm_lpss_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
pm_runtime_get_sync(chip->dev);
/*
* Hardware must first see PWM_SW_UPDATE before the PWM can be
* enabled.
*/
pwm_lpss_update(pwm);
pwm_lpss_write(pwm, pwm_lpss_read(pwm) | PWM_ENABLE);
return 0;
}
static void pwm_lpss_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
pwm_lpss_write(pwm, pwm_lpss_read(pwm) & ~PWM_ENABLE);
pm_runtime_put(chip->dev);
}
static const struct pwm_ops pwm_lpss_ops = {
.config = pwm_lpss_config,
.enable = pwm_lpss_enable,
.disable = pwm_lpss_disable,
.owner = THIS_MODULE,
};
struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r,
const struct pwm_lpss_boardinfo *info)
{
struct pwm_lpss_chip *lpwm;
int ret;
lpwm = devm_kzalloc(dev, sizeof(*lpwm), GFP_KERNEL);
if (!lpwm)
return ERR_PTR(-ENOMEM);
lpwm->regs = devm_ioremap_resource(dev, r);
if (IS_ERR(lpwm->regs))
return ERR_CAST(lpwm->regs);
lpwm->info = info;
lpwm->chip.dev = dev;
lpwm->chip.ops = &pwm_lpss_ops;
lpwm->chip.base = -1;
lpwm->chip.npwm = info->npwm;
ret = pwmchip_add(&lpwm->chip);
if (ret) {
dev_err(dev, "failed to add PWM chip: %d\n", ret);
return ERR_PTR(ret);
}
return lpwm;
}
EXPORT_SYMBOL_GPL(pwm_lpss_probe);
int pwm_lpss_remove(struct pwm_lpss_chip *lpwm)
{
return pwmchip_remove(&lpwm->chip);
}
EXPORT_SYMBOL_GPL(pwm_lpss_remove);
MODULE_DESCRIPTION("PWM driver for Intel LPSS");
MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
MODULE_LICENSE("GPL v2");